A multi-purpose hand implement that may function as pliers and also be equipped with multiple types of blades, metal file, can/bottle opener, cable cutter, wire stripper, ruler, wood saw, screwdriver heads, or the like. Excludes: POCKET KNIFE; KNIFE, CRAFTSMAN'S; TRIMMING TOOL, EDGE CUTTING; and KNIFE, FOLDING, UTILITY.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED81084*)
AKUAAIMPLEMENT QUANTITY
THE NUMBER OF IMPLEMENTS INCLUDED WITH THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AKUAA10*)
CCNCGFUNCTION DESIGN
THE DESIGN FUNCTION OF THE ITEM.
Enter clear text.
(CCNCGCLEARTEXT)
BGYG*DTOOL TYPE
INDICATES THE TYPE OF TOOL PROVIDED.
Enter the applicable reply code from the table below
(BGYGDAFV*;BGYGDAPQ$$DAPA*)
| Table 1 |
| Reply Code (AJ57) | Reply |
| ABU | ADJUSTABLE WRENCH |
| ABV | BLUNT NOSE PLIERS |
| AHR | BOTTLE OPENER |
| AHS | CAN OPENER |
| ACU | CAP CRIMPER |
| APR | CHISEL |
| ANN | CORKSCREW |
| ACV | CROSS TIP SCREWDRIVER |
| ADU | CUTTING HOOK |
| APJ | EXTRA SMALL FLAT TIP SCREWDRIVER |
| ADV | FINE EDGE CLIP POINT KNIFE BLADE |
| AEQ | FINE EDGE DROP POINT KNIFE BLADE |
| AEU | FINE EDGE SHEEPSFOOT KNIFE BLADE |
| AFU | FLASHLIGHT |
| AEV | FLAT TIP SCREWDRIVER |
| APU | FUSE CUTTER |
| AFV | HARD-WIRE CUTTER |
| APQ | HEXAGONAL BIT DRIVER |
| APK | LANYARD EYE, QUICK RELEASE |
| AGU | LANYARD EYE/RING |
| APL | LARGE BIT DRIVER |
| AGV | LARGE FLAT TIP SCREWDRIVER |
| AHT | MARLIN SPIKE |
| APM | MEDIUM BIT DRIVER |
| AHU | MEDIUM FLAT TIP SCREWDRIVER |
| AHV | METAL CUTTING SAW |
| AKU | METAL/WOOD FILE |
| APT | NAIL CLEANER |
| AKV | NAIL FILE |
| ALJ | NEEDLE NOSE PLIERS |
| AGA | PEENING |
| ALK | PEN KNIFE BLADE |
| ALU | PUNCH/AWL |
| ALV | RULER |
| AHX | SAW |
| AMU | SAW BLADE COUPLER |
| AMV | SCISSORS |
| APV | SCREWDRIVER BIT |
| ANW | SERRATED CLIP POINT KNIFE BLADE |
| APH | SERRATED DROP POINT KNIFE BLADE |
| ANX | SERRATED SHEEPSFOOT KNIFE BLADE |
| APS | SHARPENING GROOVE |
| ANY | SMALL BIT DRIVER |
| ANZ | SMALL FLAT TIP SCREWDRIVER |
| APN | SOCKET ADAPTER |
| APA | SPEAR KNIFE BLADE |
| APP | SQUARE BIT DRIVER |
| APB | TWEEZERS |
| APC | WIRE CRIMPER |
| APD | WIRE CUTTER |
| AHZ | WIRE SCRAPER |
| APF | WIRE STRIPPER |
| APG | WOOD CUTTING SAW |
AJLB*ABLADE QUANTITY
THE NUMBER OF INDIVIDUAL BLADES INCLUDED.
Enter the numeric reply with a minimum of one digit.
(AJLBA10*)
BYJS*DCUTTER DESIGN
THE DESIGN OF THE CUTTER.
Enter the applicable reply code from the table below
(BYJSDBNH)
| Table 1 |
| Reply Code (AK54) | Reply |
| BNH | DETACHABLE |
| BSS | INTEGRAL |
BYJT*DCUTTER SHAPE
THE PHYSICAL CONFIGURATION OF THE CUTTER.
Enter the applicable reply code from the table below
(BYJTDARW)
| Table 1 |
| Reply Code (AD07) | Reply |
| AAX | BENT |
| BKY | BULLET |
| ABP | CHISEL |
| ACD | CONICAL |
| ACK | CONVEX |
| ACS | CROSS PEEN |
| ACY | CURVED |
| ADB | CYLINDRICAL |
| ADQ | DIAMOND |
| AEA | DOUBLE HEXAGON |
| AEN | ELONGATED |
| AFB | FLARED |
| AFC | FLAT |
| AGZ | HALF ROUNDED |
| AHA | HAND |
| AHH | HEXAGON |
| AHL | HEXAGONAL |
| AVL | HOLLOW |
| AKT | OCTAGONAL |
| AKW | OFFSET |
| ALC | OVAL |
| ALW | PLAIN |
| AMF | POINT |
| AND | RECTANGULAR |
| ANJ | RECTANGULAR W/COLLET |
| ANE | RECTANGULAR, SEGMENTAL TYPE |
| APD | RIBBED |
| APL | ROUND |
| AQC | ROUND TAPERED |
| AQD | ROUND TAPERED POINT |
| AQN | ROUND W/FLAT |
| AQR | ROUND W/SPLINES |
| AQX | ROUNDED |
| ARW | SKEW |
| ARY | SLOTTED |
| ASF | SPIRAL |
| ASL | SQUARE |
| ASR | SQUARE POINT |
| ATG | STRAIGHT |
| AWS | TAPERED |
| AXK | THREE SQUARE |
| AXP | TRIANGULAR |
AQGE*DCUTTER TYPE
INDICATES THE TYPE OF CUTTER.
Enter the applicable reply code from the table below
(AQGEDBK*;AQGEDBP$DEE*)
| Table 1 |
| Reply Code (AL18) | Reply |
| BG | CHAIN |
| BH | CIRCLE CUTTING |
| EE | COMPOUND LEVER |
| BJ | COMPOUND LEVER, CENTER CUTTER |
| BK | COMPOUND LEVER, SHEAR CUTTER |
| BL | GEAR/RATCHET |
| BP | KNIFE |
| BQ | LINE CUTTING |
| BS | SELF FEED |
| BX | WHEEL |
AEAE*JBLADE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE BLADE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEAEJAC2.0*;AEAEJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3HKTDLRA000*;MATT3HKTDLRA000$DWDC000*;MATT3HKTDLRA000$$DWDC000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEB | CARRYING CASE |
| 3AEE | OVERALL |
| 3AEF | HANDLE |
| 3AEG | BLADE |
| 3AFQ | SINGLE BLADE |
| 3AFR | FIRST BLADE |
| 3AFS | SECOND BLADE |
| 3AFT | ALL BLADES |
| 3ATG | SHEATH |
| 3AYI | FIRST END SCREWDRIVER TIP |
| 3AYJ | SECOND END SCREWDRIVER TIP |
| 3BEC | GRIP HANDLE |
| 3CEP | CASE |
| 3CHC | CUTTER |
| 3EJL | SHEATH OVERALL |
| 3ESV | HANDLE SUPPORT |
| 3EUL | CASE COVER |
| 3EVA | OUTER CASE |
| 3FOV | FIRST POSITION SHEATH ALL GROUPS |
| 3FOW | FIRST POSITION SHEATH FIRST GROUP |
| 3FOX | FIRST POSITION SHEATH SECOND GROUP |
| 3FOY | FIRST POSITION SHEATH THIRD GROUP |
| 3FPB | FIRST POSITION SHEATH OVERALL |
| 3FXW | SECOND POSITION SHEATH ALL GROUPS |
| 3FXX | SECOND POSITION SHEATH FIRST GROUP |
| 3FXY | SECOND POSITION SHEATH SECOND GROUP |
| 3FXZ | SECOND POSITION SHEATH THIRD GROUP |
| 3FYA | SECOND POSITION SHEATH FOURTH GROUP |
| 3FYB | SECOND POSITION SHEATH FIFTH GROUP |
| 3FYE | SECOND POSITION SHEATH OVERALL |
| 3GEM | THIRD POSITION SHEATH ALL GROUPS |
| 3GEN | THIRD POSITION SHEATH FIRST GROUP |
| 3GEO | THIRD POSITION SHEATH SECOND GROUP |
| 3GER | THIRD POSITION SHEATH OVERALL |
| 3GKA | FOURTH POSITION SHEATH ALL GROUPS |
| 3GKB | FOURTH POSITION SHEATH FIRST GROUP |
| 3GKE | FOURTH POSITION SHEATH OVERALL |
| 3GOB | FIFTH POSITION SHEATH ALL GROUPS |
| 3GOC | FIFTH POSITION SHEATH FIRST GROUP |
| 3GRE | SIXTH POSITION SHEATH ALL GROUPS |
| 3GRF | SIXTH POSITION SHEATH SECOND GROUP |
| 3GTT | SEVENTH POSITION SHEATH ALL GROUPS |
| 3GTU | SEVENTH POSITION SHEATH FIRST GROUP |
| 3GVC | EIGHTH POSITION SHEATH ALL GROUPS |
| 3GVD | EIGHTH POSITION SHEATH FIRST GROUP |
| 3GVE | EIGHTH POSITION SHEATH THIRD GROUP |
| 3GWE | NINTH POSITION SHEATH ALL GROUPS |
| 3GXS | TENTH POSITION SHEATH FOURTH GROUP |
| 3GYV | TWELFTH POSITION SHEATH FIFTH GROUP |
| 3HJQ | THIRD BLADE |
| 3HJR | FOURTH BLADE |
| 3HJS | FIFTH BLADE |
| 3HJT | SIXTH BLADE |
| 3HJU | SEVENTH BLADE |
| 3HJV | EIGHTH BLADE |
| 3HJW | NINTH BLADE |
| 3HJX | TENTH BLADE |
| 3HJY | ELEVENTH BLADE |
| 3HJZ | TWELFTH BLADE |
| 3HKA | THIRTEENTH BLADE |
| 3HKB | FOURTEENTH BLADE |
| 3HKC | FIFTEENTH BLADE |
| 3HKD | SIXTEENTH BLADE |
| 3HKE | SEVENTEENTH BLADE |
| 3HKF | EIGHTEENTH BLADE |
| 3HKG | NINETEENTH BLADE |
| 3HKH | TWENTIETH BLADE |
| 3HKI | TWENTY-FIRST BLADE |
| 3HKJ | TWENTY-SECOND BLADE |
| 3HKK | TWENTY-THIRD BLADE |
| 3HKL | TWENTY-FOURTH BLADE |
| 3HKM | TWENTY-FIFTH BLADE |
| 3HKN | TWENTY-SIXTH BLADE |
| 3HKO | TWENTY-SEVENTH BLADE |
| 3HKP | TWENTY-EIGHTH BLADE |
| 3HKQ | TWENTY-NINTH BLADE |
| 3HKR | THIRTIETH BLADE |
| 3HKS | THIRTY-FIRST BLADE |
| 3HKT | THIRTY-SECOND BLADE |
| 3HKU | THIRTY-THIRD BLADE |
| 3HKV | THIRTY-FOURTH BLADE |
| 3HKW | THIRTY-FIFTH BLADE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3IAE | INNER CASE |
| 3IBI | BLADES |
| 3IBK | OVERALL EXCEPT BLADE |
| 3IBX | SHANK SHEATH |
| 3JAY | HANDLE BLADE |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| LRA000 | LEATHER |
| LRE000 | LEATHER ARTIFICIAL |
| FBB000 | NYLON |
| PCA000 | PLASTIC |
| PCCB00 | PLASTIC NYLON |
| PCDR00 | PLASTIC NYLON MESH |
| WDN000 | ROSEWOOD |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| TTB000 | TITANIUM |
| WDC000 | WOOD |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEB | CARRYING CASE |
| 3AEE | OVERALL |
| 3AEF | HANDLE |
| 3AEG | BLADE |
| 3AFQ | SINGLE BLADE |
| 3AFR | FIRST BLADE |
| 3AFS | SECOND BLADE |
| 3AFT | ALL BLADES |
| 3ATG | SHEATH |
| 3AYI | FIRST END SCREWDRIVER TIP |
| 3AYJ | SECOND END SCREWDRIVER TIP |
| 3BEC | GRIP HANDLE |
| 3CEP | CASE |
| 3CHC | CUTTER |
| 3EJL | SHEATH OVERALL |
| 3ESV | HANDLE SUPPORT |
| 3EUL | CASE COVER |
| 3EVA | OUTER CASE |
| 3FOV | FIRST POSITION SHEATH ALL GROUPS |
| 3FOW | FIRST POSITION SHEATH FIRST GROUP |
| 3FOX | FIRST POSITION SHEATH SECOND GROUP |
| 3FOY | FIRST POSITION SHEATH THIRD GROUP |
| 3FPB | FIRST POSITION SHEATH OVERALL |
| 3FXW | SECOND POSITION SHEATH ALL GROUPS |
| 3FXX | SECOND POSITION SHEATH FIRST GROUP |
| 3FXY | SECOND POSITION SHEATH SECOND GROUP |
| 3FXZ | SECOND POSITION SHEATH THIRD GROUP |
| 3FYA | SECOND POSITION SHEATH FOURTH GROUP |
| 3FYB | SECOND POSITION SHEATH FIFTH GROUP |
| 3FYE | SECOND POSITION SHEATH OVERALL |
| 3GEM | THIRD POSITION SHEATH ALL GROUPS |
| 3GEN | THIRD POSITION SHEATH FIRST GROUP |
| 3GEO | THIRD POSITION SHEATH SECOND GROUP |
| 3GER | THIRD POSITION SHEATH OVERALL |
| 3GKA | FOURTH POSITION SHEATH ALL GROUPS |
| 3GKB | FOURTH POSITION SHEATH FIRST GROUP |
| 3GKE | FOURTH POSITION SHEATH OVERALL |
| 3GOB | FIFTH POSITION SHEATH ALL GROUPS |
| 3GOC | FIFTH POSITION SHEATH FIRST GROUP |
| 3GRE | SIXTH POSITION SHEATH ALL GROUPS |
| 3GRF | SIXTH POSITION SHEATH SECOND GROUP |
| 3GTT | SEVENTH POSITION SHEATH ALL GROUPS |
| 3GTU | SEVENTH POSITION SHEATH FIRST GROUP |
| 3GVC | EIGHTH POSITION SHEATH ALL GROUPS |
| 3GVD | EIGHTH POSITION SHEATH FIRST GROUP |
| 3GVE | EIGHTH POSITION SHEATH THIRD GROUP |
| 3GWE | NINTH POSITION SHEATH ALL GROUPS |
| 3GXS | TENTH POSITION SHEATH FOURTH GROUP |
| 3GYV | TWELFTH POSITION SHEATH FIFTH GROUP |
| 3HJQ | THIRD BLADE |
| 3HJR | FOURTH BLADE |
| 3HJS | FIFTH BLADE |
| 3HJT | SIXTH BLADE |
| 3HJU | SEVENTH BLADE |
| 3HJV | EIGHTH BLADE |
| 3HJW | NINTH BLADE |
| 3HJX | TENTH BLADE |
| 3HJY | ELEVENTH BLADE |
| 3HJZ | TWELFTH BLADE |
| 3HKA | THIRTEENTH BLADE |
| 3HKB | FOURTEENTH BLADE |
| 3HKC | FIFTEENTH BLADE |
| 3HKD | SIXTEENTH BLADE |
| 3HKE | SEVENTEENTH BLADE |
| 3HKF | EIGHTEENTH BLADE |
| 3HKG | NINETEENTH BLADE |
| 3HKH | TWENTIETH BLADE |
| 3HKI | TWENTY-FIRST BLADE |
| 3HKJ | TWENTY-SECOND BLADE |
| 3HKK | TWENTY-THIRD BLADE |
| 3HKL | TWENTY-FOURTH BLADE |
| 3HKM | TWENTY-FIFTH BLADE |
| 3HKN | TWENTY-SIXTH BLADE |
| 3HKO | TWENTY-SEVENTH BLADE |
| 3HKP | TWENTY-EIGHTH BLADE |
| 3HKQ | TWENTY-NINTH BLADE |
| 3HKR | THIRTIETH BLADE |
| 3HKS | THIRTY-FIRST BLADE |
| 3HKT | THIRTY-SECOND BLADE |
| 3HKU | THIRTY-THIRD BLADE |
| 3HKV | THIRTY-FOURTH BLADE |
| 3HKW | THIRTY-FIFTH BLADE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3IAE | INNER CASE |
| 3IBI | BLADES |
| 3IBK | OVERALL EXCEPT BLADE |
| 3IBX | SHANK SHEATH |
| 3JAY | HANDLE BLADE |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(HUES3GTTDGR0000*;HUES3GTTDGR0000$$DBL0000*;)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEB | CARRYING CASE |
| 3AEE | OVERALL |
| 3AEF | HANDLE |
| 3AEG | BLADE |
| 3AFQ | SINGLE BLADE |
| 3AFR | FIRST BLADE |
| 3AFS | SECOND BLADE |
| 3AFT | ALL BLADES |
| 3ATG | SHEATH |
| 3AYI | FIRST END SCREWDRIVER TIP |
| 3AYJ | SECOND END SCREWDRIVER TIP |
| 3BEC | GRIP HANDLE |
| 3CEP | CASE |
| 3CHC | CUTTER |
| 3EJL | SHEATH OVERALL |
| 3ESV | HANDLE SUPPORT |
| 3EUL | CASE COVER |
| 3EVA | OUTER CASE |
| 3FOV | FIRST POSITION SHEATH ALL GROUPS |
| 3FOW | FIRST POSITION SHEATH FIRST GROUP |
| 3FOX | FIRST POSITION SHEATH SECOND GROUP |
| 3FOY | FIRST POSITION SHEATH THIRD GROUP |
| 3FPB | FIRST POSITION SHEATH OVERALL |
| 3FXW | SECOND POSITION SHEATH ALL GROUPS |
| 3FXX | SECOND POSITION SHEATH FIRST GROUP |
| 3FXY | SECOND POSITION SHEATH SECOND GROUP |
| 3FXZ | SECOND POSITION SHEATH THIRD GROUP |
| 3FYA | SECOND POSITION SHEATH FOURTH GROUP |
| 3FYB | SECOND POSITION SHEATH FIFTH GROUP |
| 3FYE | SECOND POSITION SHEATH OVERALL |
| 3GEM | THIRD POSITION SHEATH ALL GROUPS |
| 3GEN | THIRD POSITION SHEATH FIRST GROUP |
| 3GEO | THIRD POSITION SHEATH SECOND GROUP |
| 3GER | THIRD POSITION SHEATH OVERALL |
| 3GKA | FOURTH POSITION SHEATH ALL GROUPS |
| 3GKB | FOURTH POSITION SHEATH FIRST GROUP |
| 3GKE | FOURTH POSITION SHEATH OVERALL |
| 3GOB | FIFTH POSITION SHEATH ALL GROUPS |
| 3GOC | FIFTH POSITION SHEATH FIRST GROUP |
| 3GRE | SIXTH POSITION SHEATH ALL GROUPS |
| 3GRF | SIXTH POSITION SHEATH SECOND GROUP |
| 3GTT | SEVENTH POSITION SHEATH ALL GROUPS |
| 3GTU | SEVENTH POSITION SHEATH FIRST GROUP |
| 3GVC | EIGHTH POSITION SHEATH ALL GROUPS |
| 3GVD | EIGHTH POSITION SHEATH FIRST GROUP |
| 3GVE | EIGHTH POSITION SHEATH THIRD GROUP |
| 3GWE | NINTH POSITION SHEATH ALL GROUPS |
| 3GXS | TENTH POSITION SHEATH FOURTH GROUP |
| 3GYV | TWELFTH POSITION SHEATH FIFTH GROUP |
| 3HJQ | THIRD BLADE |
| 3HJR | FOURTH BLADE |
| 3HJS | FIFTH BLADE |
| 3HJT | SIXTH BLADE |
| 3HJU | SEVENTH BLADE |
| 3HJV | EIGHTH BLADE |
| 3HJW | NINTH BLADE |
| 3HJX | TENTH BLADE |
| 3HJY | ELEVENTH BLADE |
| 3HJZ | TWELFTH BLADE |
| 3HKA | THIRTEENTH BLADE |
| 3HKB | FOURTEENTH BLADE |
| 3HKC | FIFTEENTH BLADE |
| 3HKD | SIXTEENTH BLADE |
| 3HKE | SEVENTEENTH BLADE |
| 3HKF | EIGHTEENTH BLADE |
| 3HKG | NINETEENTH BLADE |
| 3HKH | TWENTIETH BLADE |
| 3HKI | TWENTY-FIRST BLADE |
| 3HKJ | TWENTY-SECOND BLADE |
| 3HKK | TWENTY-THIRD BLADE |
| 3HKL | TWENTY-FOURTH BLADE |
| 3HKM | TWENTY-FIFTH BLADE |
| 3HKN | TWENTY-SIXTH BLADE |
| 3HKO | TWENTY-SEVENTH BLADE |
| 3HKP | TWENTY-EIGHTH BLADE |
| 3HKQ | TWENTY-NINTH BLADE |
| 3HKR | THIRTIETH BLADE |
| 3HKS | THIRTY-FIRST BLADE |
| 3HKT | THIRTY-SECOND BLADE |
| 3HKU | THIRTY-THIRD BLADE |
| 3HKV | THIRTY-FOURTH BLADE |
| 3HKW | THIRTY-FIFTH BLADE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3IAE | INNER CASE |
| 3IBI | BLADES |
| 3IBK | OVERALL EXCEPT BLADE |
| 3IBX | SHANK SHEATH |
| 3JAY | HANDLE BLADE |
| Table 2 |
| Reply Code (AD06) | Reply |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BR0000 | BROWN |
| GR0000 | GREEN |
| RG0000 | ORANGE |
| YE0000 | YELLOW |
IF YOU ANSWER MRC HDCL, YOU MUST ANSWER MRC (HUES)
HDCL*JCOLOR DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,MANUFACTURERS REFERENCE,OR INDEX SYSTEM AND THE CLASIFICATION DESIGNATION, USED TO IDENTIFY COLOR, COLOR SELECTION, COLOR MATCHING AND QUALITY CONTROL OF A SPECIFIC COLOR.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(HDCLJEATEXT1234*;HDCLJEATEXT1234$$JEATEXT1234*;HDCLJEATEXT1234$JEATEXT1234*;HDCL1BJEATEXT1234*;HDCL1BJEATEXT1234$$JEATEXT1234*;HDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEB | CARRYING CASE |
| 3AEE | OVERALL |
| 3AEF | HANDLE |
| 3AEG | BLADE |
| 3AFQ | SINGLE BLADE |
| 3AFR | FIRST BLADE |
| 3AFS | SECOND BLADE |
| 3AFT | ALL BLADES |
| 3ATG | SHEATH |
| 3AYI | FIRST END SCREWDRIVER TIP |
| 3AYJ | SECOND END SCREWDRIVER TIP |
| 3BEC | GRIP HANDLE |
| 3CEP | CASE |
| 3CHC | CUTTER |
| 3EJL | SHEATH OVERALL |
| 3ESV | HANDLE SUPPORT |
| 3EUL | CASE COVER |
| 3EVA | OUTER CASE |
| 3FOV | FIRST POSITION SHEATH ALL GROUPS |
| 3FOW | FIRST POSITION SHEATH FIRST GROUP |
| 3FOX | FIRST POSITION SHEATH SECOND GROUP |
| 3FOY | FIRST POSITION SHEATH THIRD GROUP |
| 3FPB | FIRST POSITION SHEATH OVERALL |
| 3FXW | SECOND POSITION SHEATH ALL GROUPS |
| 3FXX | SECOND POSITION SHEATH FIRST GROUP |
| 3FXY | SECOND POSITION SHEATH SECOND GROUP |
| 3FXZ | SECOND POSITION SHEATH THIRD GROUP |
| 3FYA | SECOND POSITION SHEATH FOURTH GROUP |
| 3FYB | SECOND POSITION SHEATH FIFTH GROUP |
| 3FYE | SECOND POSITION SHEATH OVERALL |
| 3GEM | THIRD POSITION SHEATH ALL GROUPS |
| 3GEN | THIRD POSITION SHEATH FIRST GROUP |
| 3GEO | THIRD POSITION SHEATH SECOND GROUP |
| 3GER | THIRD POSITION SHEATH OVERALL |
| 3GKA | FOURTH POSITION SHEATH ALL GROUPS |
| 3GKB | FOURTH POSITION SHEATH FIRST GROUP |
| 3GKE | FOURTH POSITION SHEATH OVERALL |
| 3GOB | FIFTH POSITION SHEATH ALL GROUPS |
| 3GOC | FIFTH POSITION SHEATH FIRST GROUP |
| 3GRE | SIXTH POSITION SHEATH ALL GROUPS |
| 3GRF | SIXTH POSITION SHEATH SECOND GROUP |
| 3GTT | SEVENTH POSITION SHEATH ALL GROUPS |
| 3GTU | SEVENTH POSITION SHEATH FIRST GROUP |
| 3GVC | EIGHTH POSITION SHEATH ALL GROUPS |
| 3GVD | EIGHTH POSITION SHEATH FIRST GROUP |
| 3GVE | EIGHTH POSITION SHEATH THIRD GROUP |
| 3GWE | NINTH POSITION SHEATH ALL GROUPS |
| 3GXS | TENTH POSITION SHEATH FOURTH GROUP |
| 3GYV | TWELFTH POSITION SHEATH FIFTH GROUP |
| 3HJQ | THIRD BLADE |
| 3HJR | FOURTH BLADE |
| 3HJS | FIFTH BLADE |
| 3HJT | SIXTH BLADE |
| 3HJU | SEVENTH BLADE |
| 3HJV | EIGHTH BLADE |
| 3HJW | NINTH BLADE |
| 3HJX | TENTH BLADE |
| 3HJY | ELEVENTH BLADE |
| 3HJZ | TWELFTH BLADE |
| 3HKA | THIRTEENTH BLADE |
| 3HKB | FOURTEENTH BLADE |
| 3HKC | FIFTEENTH BLADE |
| 3HKD | SIXTEENTH BLADE |
| 3HKE | SEVENTEENTH BLADE |
| 3HKF | EIGHTEENTH BLADE |
| 3HKG | NINETEENTH BLADE |
| 3HKH | TWENTIETH BLADE |
| 3HKI | TWENTY-FIRST BLADE |
| 3HKJ | TWENTY-SECOND BLADE |
| 3HKK | TWENTY-THIRD BLADE |
| 3HKL | TWENTY-FOURTH BLADE |
| 3HKM | TWENTY-FIFTH BLADE |
| 3HKN | TWENTY-SIXTH BLADE |
| 3HKO | TWENTY-SEVENTH BLADE |
| 3HKP | TWENTY-EIGHTH BLADE |
| 3HKQ | TWENTY-NINTH BLADE |
| 3HKR | THIRTIETH BLADE |
| 3HKS | THIRTY-FIRST BLADE |
| 3HKT | THIRTY-SECOND BLADE |
| 3HKU | THIRTY-THIRD BLADE |
| 3HKV | THIRTY-FOURTH BLADE |
| 3HKW | THIRTY-FIFTH BLADE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3IAE | INNER CASE |
| 3IBI | BLADES |
| 3IBK | OVERALL EXCEPT BLADE |
| 3IBX | SHANK SHEATH |
| 3JAY | HANDLE BLADE |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP93) | Reply |
| M | 10TH COLOR RESPONSE |
| N | 11TH COLOR RESPONSE |
| P | 12TH COLOR RESPONSE |
| Q | 13TH COLOR RESPONSE |
| R | 14TH COLOR RESPONSE |
| S | 15TH COLOR RESPONSE |
| T | 16TH COLOR RESPONSE |
| U | 17TH COLOR RESPONSE |
| W | 18TH COLOR RESPONSE |
| X | 19TH COLOR RESPONSE |
| B | 1ST COLOR RESPONSE |
| Y | 20TH COLOR RESPONSE |
| Z | 21ST COLOR RESPONSE |
| V | 22ND COLOR RESPONSE |
| C | 2ND COLOR RESPONSE |
| D | 3RD COLOR RESPONSE |
| E | 4TH COLOR RESPONSE |
| F | 5TH COLOR RESPONSE |
| H | 6TH COLOR RESPONSE |
| J | 7TH COLOR RESPONSE |
| K | 8TH COLOR RESPONSE |
| L | 9TH COLOR RESPONSE |
| G | ALL COLOR RESPONSE |
| A | SINGLE COLOR RESPONSE |
ALEY*DCOLOR PATTERN
AN INDICATION OF THE COLOR PATTERNS.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ALEY3HKQDAF)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEB | CARRYING CASE |
| 3AEE | OVERALL |
| 3AEF | HANDLE |
| 3AEG | BLADE |
| 3AFQ | SINGLE BLADE |
| 3AFR | FIRST BLADE |
| 3AFS | SECOND BLADE |
| 3AFT | ALL BLADES |
| 3ATG | SHEATH |
| 3AYI | FIRST END SCREWDRIVER TIP |
| 3AYJ | SECOND END SCREWDRIVER TIP |
| 3BEC | GRIP HANDLE |
| 3CEP | CASE |
| 3CHC | CUTTER |
| 3EJL | SHEATH OVERALL |
| 3ESV | HANDLE SUPPORT |
| 3EUL | CASE COVER |
| 3EVA | OUTER CASE |
| 3FOV | FIRST POSITION SHEATH ALL GROUPS |
| 3FOW | FIRST POSITION SHEATH FIRST GROUP |
| 3FOX | FIRST POSITION SHEATH SECOND GROUP |
| 3FOY | FIRST POSITION SHEATH THIRD GROUP |
| 3FPB | FIRST POSITION SHEATH OVERALL |
| 3FXW | SECOND POSITION SHEATH ALL GROUPS |
| 3FXX | SECOND POSITION SHEATH FIRST GROUP |
| 3FXY | SECOND POSITION SHEATH SECOND GROUP |
| 3FXZ | SECOND POSITION SHEATH THIRD GROUP |
| 3FYA | SECOND POSITION SHEATH FOURTH GROUP |
| 3FYB | SECOND POSITION SHEATH FIFTH GROUP |
| 3FYE | SECOND POSITION SHEATH OVERALL |
| 3GEM | THIRD POSITION SHEATH ALL GROUPS |
| 3GEN | THIRD POSITION SHEATH FIRST GROUP |
| 3GEO | THIRD POSITION SHEATH SECOND GROUP |
| 3GER | THIRD POSITION SHEATH OVERALL |
| 3GKA | FOURTH POSITION SHEATH ALL GROUPS |
| 3GKB | FOURTH POSITION SHEATH FIRST GROUP |
| 3GKE | FOURTH POSITION SHEATH OVERALL |
| 3GOB | FIFTH POSITION SHEATH ALL GROUPS |
| 3GOC | FIFTH POSITION SHEATH FIRST GROUP |
| 3GRE | SIXTH POSITION SHEATH ALL GROUPS |
| 3GRF | SIXTH POSITION SHEATH SECOND GROUP |
| 3GTT | SEVENTH POSITION SHEATH ALL GROUPS |
| 3GTU | SEVENTH POSITION SHEATH FIRST GROUP |
| 3GVC | EIGHTH POSITION SHEATH ALL GROUPS |
| 3GVD | EIGHTH POSITION SHEATH FIRST GROUP |
| 3GVE | EIGHTH POSITION SHEATH THIRD GROUP |
| 3GWE | NINTH POSITION SHEATH ALL GROUPS |
| 3GXS | TENTH POSITION SHEATH FOURTH GROUP |
| 3GYV | TWELFTH POSITION SHEATH FIFTH GROUP |
| 3HJQ | THIRD BLADE |
| 3HJR | FOURTH BLADE |
| 3HJS | FIFTH BLADE |
| 3HJT | SIXTH BLADE |
| 3HJU | SEVENTH BLADE |
| 3HJV | EIGHTH BLADE |
| 3HJW | NINTH BLADE |
| 3HJX | TENTH BLADE |
| 3HJY | ELEVENTH BLADE |
| 3HJZ | TWELFTH BLADE |
| 3HKA | THIRTEENTH BLADE |
| 3HKB | FOURTEENTH BLADE |
| 3HKC | FIFTEENTH BLADE |
| 3HKD | SIXTEENTH BLADE |
| 3HKE | SEVENTEENTH BLADE |
| 3HKF | EIGHTEENTH BLADE |
| 3HKG | NINETEENTH BLADE |
| 3HKH | TWENTIETH BLADE |
| 3HKI | TWENTY-FIRST BLADE |
| 3HKJ | TWENTY-SECOND BLADE |
| 3HKK | TWENTY-THIRD BLADE |
| 3HKL | TWENTY-FOURTH BLADE |
| 3HKM | TWENTY-FIFTH BLADE |
| 3HKN | TWENTY-SIXTH BLADE |
| 3HKO | TWENTY-SEVENTH BLADE |
| 3HKP | TWENTY-EIGHTH BLADE |
| 3HKQ | TWENTY-NINTH BLADE |
| 3HKR | THIRTIETH BLADE |
| 3HKS | THIRTY-FIRST BLADE |
| 3HKT | THIRTY-SECOND BLADE |
| 3HKU | THIRTY-THIRD BLADE |
| 3HKV | THIRTY-FOURTH BLADE |
| 3HKW | THIRTY-FIFTH BLADE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3IAE | INNER CASE |
| 3IBI | BLADES |
| 3IBK | OVERALL EXCEPT BLADE |
| 3IBX | SHANK SHEATH |
| 3JAY | HANDLE BLADE |
| Table 2 |
| Reply Code (AH38) | Reply |
| BA | AIRMAN BATTLE UNIFORM CAMOUFLAGE |
| AW | ARCTIC CAMOUFLAGE |
| BH | ARMY GREEN 483 CAMOUFLAGE |
| AX | ARMY UNIVERSAL CAMOUFLAGE |
| BE | CAMOUFLAGE |
| AE | CHECKED |
| BB | COMBAT CAMOUFLAGE |
| BF | DARK BROWN CAMOUFLAGE |
| AS | DESERT CAMOUFLAGE |
| AB | DESIGN |
| AV | DIAMOND PLATE |
| AY | DIGITAL DESERT CAMOUFLAGE |
| AZ | DIGITAL WOODLAND CAMOUFLAGE |
| AU | FOREST CAMOUFLAGE |
| BJ | GREEN 483 CAMOUFLAGE |
| BG | GREEN CAMOUFLAGE |
| AH | JASPE |
| BD | JUNGLE CAMOUFLAGE |
| AJ | MARBELIZED |
| AA | MOUNTAIN CAMOUFLAGE |
| BC | MULTI-CAMOUFLAGE |
| AG | MULTICOLOR |
| AQ | OPERATION ENDURING FREEDOM CAMOUFLAGE PATTERN |
| AP | OPERATIONAL CAMOUFLAGE |
| AK | PLAID |
| AM | PRINTED |
| AC | SOLID |
| AD | STRIPES |
| AL | TEXTURED |
| AF | VARIEGATED |
| AR | WINTER CAMOUFLAGE |
| AT | WOODLAND CAMOUFLAGE |
| AN | WOVEN |
AKUB*JOPEN LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM WHEN OPENED, IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKUBJAC2.0*;AKUBJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBRJ*JCLOSED LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN OBJECT WHEN CLOSED,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBRJJAB2.0*;CBRJJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3GTUDCRA000*;SFTT3GTUDCRA000$DXXG000*;SFTT3GTUDCRA000$$DXXG000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEB | CARRYING CASE |
| 3AEE | OVERALL |
| 3AEF | HANDLE |
| 3AEG | BLADE |
| 3AFQ | SINGLE BLADE |
| 3AFR | FIRST BLADE |
| 3AFS | SECOND BLADE |
| 3AFT | ALL BLADES |
| 3ATG | SHEATH |
| 3AYI | FIRST END SCREWDRIVER TIP |
| 3AYJ | SECOND END SCREWDRIVER TIP |
| 3BEC | GRIP HANDLE |
| 3CEP | CASE |
| 3CHC | CUTTER |
| 3EJL | SHEATH OVERALL |
| 3ESV | HANDLE SUPPORT |
| 3EUL | CASE COVER |
| 3EVA | OUTER CASE |
| 3FOV | FIRST POSITION SHEATH ALL GROUPS |
| 3FOW | FIRST POSITION SHEATH FIRST GROUP |
| 3FOX | FIRST POSITION SHEATH SECOND GROUP |
| 3FOY | FIRST POSITION SHEATH THIRD GROUP |
| 3FPB | FIRST POSITION SHEATH OVERALL |
| 3FXW | SECOND POSITION SHEATH ALL GROUPS |
| 3FXX | SECOND POSITION SHEATH FIRST GROUP |
| 3FXY | SECOND POSITION SHEATH SECOND GROUP |
| 3FXZ | SECOND POSITION SHEATH THIRD GROUP |
| 3FYA | SECOND POSITION SHEATH FOURTH GROUP |
| 3FYB | SECOND POSITION SHEATH FIFTH GROUP |
| 3FYE | SECOND POSITION SHEATH OVERALL |
| 3GEM | THIRD POSITION SHEATH ALL GROUPS |
| 3GEN | THIRD POSITION SHEATH FIRST GROUP |
| 3GEO | THIRD POSITION SHEATH SECOND GROUP |
| 3GER | THIRD POSITION SHEATH OVERALL |
| 3GKA | FOURTH POSITION SHEATH ALL GROUPS |
| 3GKB | FOURTH POSITION SHEATH FIRST GROUP |
| 3GKE | FOURTH POSITION SHEATH OVERALL |
| 3GOB | FIFTH POSITION SHEATH ALL GROUPS |
| 3GOC | FIFTH POSITION SHEATH FIRST GROUP |
| 3GRE | SIXTH POSITION SHEATH ALL GROUPS |
| 3GRF | SIXTH POSITION SHEATH SECOND GROUP |
| 3GTT | SEVENTH POSITION SHEATH ALL GROUPS |
| 3GTU | SEVENTH POSITION SHEATH FIRST GROUP |
| 3GVC | EIGHTH POSITION SHEATH ALL GROUPS |
| 3GVD | EIGHTH POSITION SHEATH FIRST GROUP |
| 3GVE | EIGHTH POSITION SHEATH THIRD GROUP |
| 3GWE | NINTH POSITION SHEATH ALL GROUPS |
| 3GXS | TENTH POSITION SHEATH FOURTH GROUP |
| 3GYV | TWELFTH POSITION SHEATH FIFTH GROUP |
| 3HJQ | THIRD BLADE |
| 3HJR | FOURTH BLADE |
| 3HJS | FIFTH BLADE |
| 3HJT | SIXTH BLADE |
| 3HJU | SEVENTH BLADE |
| 3HJV | EIGHTH BLADE |
| 3HJW | NINTH BLADE |
| 3HJX | TENTH BLADE |
| 3HJY | ELEVENTH BLADE |
| 3HJZ | TWELFTH BLADE |
| 3HKA | THIRTEENTH BLADE |
| 3HKB | FOURTEENTH BLADE |
| 3HKC | FIFTEENTH BLADE |
| 3HKD | SIXTEENTH BLADE |
| 3HKE | SEVENTEENTH BLADE |
| 3HKF | EIGHTEENTH BLADE |
| 3HKG | NINETEENTH BLADE |
| 3HKH | TWENTIETH BLADE |
| 3HKI | TWENTY-FIRST BLADE |
| 3HKJ | TWENTY-SECOND BLADE |
| 3HKK | TWENTY-THIRD BLADE |
| 3HKL | TWENTY-FOURTH BLADE |
| 3HKM | TWENTY-FIFTH BLADE |
| 3HKN | TWENTY-SIXTH BLADE |
| 3HKO | TWENTY-SEVENTH BLADE |
| 3HKP | TWENTY-EIGHTH BLADE |
| 3HKQ | TWENTY-NINTH BLADE |
| 3HKR | THIRTIETH BLADE |
| 3HKS | THIRTY-FIRST BLADE |
| 3HKT | THIRTY-SECOND BLADE |
| 3HKU | THIRTY-THIRD BLADE |
| 3HKV | THIRTY-FOURTH BLADE |
| 3HKW | THIRTY-FIFTH BLADE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3IAE | INNER CASE |
| 3IBI | BLADES |
| 3IBK | OVERALL EXCEPT BLADE |
| 3IBX | SHANK SHEATH |
| 3JAY | HANDLE BLADE |
| Table 2 |
| Reply Code (SF01) | Reply |
| XXG000 | BLACK OXIDE |
| CRA000 | CHROMIUM |
| NLA000 | NICKEL |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEB | CARRYING CASE |
| 3AEE | OVERALL |
| 3AEF | HANDLE |
| 3AEG | BLADE |
| 3AFQ | SINGLE BLADE |
| 3AFR | FIRST BLADE |
| 3AFS | SECOND BLADE |
| 3AFT | ALL BLADES |
| 3ATG | SHEATH |
| 3AYI | FIRST END SCREWDRIVER TIP |
| 3AYJ | SECOND END SCREWDRIVER TIP |
| 3BEC | GRIP HANDLE |
| 3CEP | CASE |
| 3CHC | CUTTER |
| 3EJL | SHEATH OVERALL |
| 3ESV | HANDLE SUPPORT |
| 3EUL | CASE COVER |
| 3EVA | OUTER CASE |
| 3FOV | FIRST POSITION SHEATH ALL GROUPS |
| 3FOW | FIRST POSITION SHEATH FIRST GROUP |
| 3FOX | FIRST POSITION SHEATH SECOND GROUP |
| 3FOY | FIRST POSITION SHEATH THIRD GROUP |
| 3FPB | FIRST POSITION SHEATH OVERALL |
| 3FXW | SECOND POSITION SHEATH ALL GROUPS |
| 3FXX | SECOND POSITION SHEATH FIRST GROUP |
| 3FXY | SECOND POSITION SHEATH SECOND GROUP |
| 3FXZ | SECOND POSITION SHEATH THIRD GROUP |
| 3FYA | SECOND POSITION SHEATH FOURTH GROUP |
| 3FYB | SECOND POSITION SHEATH FIFTH GROUP |
| 3FYE | SECOND POSITION SHEATH OVERALL |
| 3GEM | THIRD POSITION SHEATH ALL GROUPS |
| 3GEN | THIRD POSITION SHEATH FIRST GROUP |
| 3GEO | THIRD POSITION SHEATH SECOND GROUP |
| 3GER | THIRD POSITION SHEATH OVERALL |
| 3GKA | FOURTH POSITION SHEATH ALL GROUPS |
| 3GKB | FOURTH POSITION SHEATH FIRST GROUP |
| 3GKE | FOURTH POSITION SHEATH OVERALL |
| 3GOB | FIFTH POSITION SHEATH ALL GROUPS |
| 3GOC | FIFTH POSITION SHEATH FIRST GROUP |
| 3GRE | SIXTH POSITION SHEATH ALL GROUPS |
| 3GRF | SIXTH POSITION SHEATH SECOND GROUP |
| 3GTT | SEVENTH POSITION SHEATH ALL GROUPS |
| 3GTU | SEVENTH POSITION SHEATH FIRST GROUP |
| 3GVC | EIGHTH POSITION SHEATH ALL GROUPS |
| 3GVD | EIGHTH POSITION SHEATH FIRST GROUP |
| 3GVE | EIGHTH POSITION SHEATH THIRD GROUP |
| 3GWE | NINTH POSITION SHEATH ALL GROUPS |
| 3GXS | TENTH POSITION SHEATH FOURTH GROUP |
| 3GYV | TWELFTH POSITION SHEATH FIFTH GROUP |
| 3HJQ | THIRD BLADE |
| 3HJR | FOURTH BLADE |
| 3HJS | FIFTH BLADE |
| 3HJT | SIXTH BLADE |
| 3HJU | SEVENTH BLADE |
| 3HJV | EIGHTH BLADE |
| 3HJW | NINTH BLADE |
| 3HJX | TENTH BLADE |
| 3HJY | ELEVENTH BLADE |
| 3HJZ | TWELFTH BLADE |
| 3HKA | THIRTEENTH BLADE |
| 3HKB | FOURTEENTH BLADE |
| 3HKC | FIFTEENTH BLADE |
| 3HKD | SIXTEENTH BLADE |
| 3HKE | SEVENTEENTH BLADE |
| 3HKF | EIGHTEENTH BLADE |
| 3HKG | NINETEENTH BLADE |
| 3HKH | TWENTIETH BLADE |
| 3HKI | TWENTY-FIRST BLADE |
| 3HKJ | TWENTY-SECOND BLADE |
| 3HKK | TWENTY-THIRD BLADE |
| 3HKL | TWENTY-FOURTH BLADE |
| 3HKM | TWENTY-FIFTH BLADE |
| 3HKN | TWENTY-SIXTH BLADE |
| 3HKO | TWENTY-SEVENTH BLADE |
| 3HKP | TWENTY-EIGHTH BLADE |
| 3HKQ | TWENTY-NINTH BLADE |
| 3HKR | THIRTIETH BLADE |
| 3HKS | THIRTY-FIRST BLADE |
| 3HKT | THIRTY-SECOND BLADE |
| 3HKU | THIRTY-THIRD BLADE |
| 3HKV | THIRTY-FOURTH BLADE |
| 3HKW | THIRTY-FIFTH BLADE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3IAE | INNER CASE |
| 3IBI | BLADES |
| 3IBK | OVERALL EXCEPT BLADE |
| 3IBX | SHANK SHEATH |
| 3JAY | HANDLE BLADE |
| Table 2 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDFLA*;CBBLDDDQ$$DFSD*)
| Table 1 |
| Reply Code (AN47) | Reply |
| FSD | AUTOMATIC OPENING |
| FLA | BELT CLIP |
| FSE | BLADE LOCK |
| DDQ | CLEVIS |
| EUU | GRIP HANDLE |
| FSJ | HOOK AND PILE CLOSURE SHEATH |
| FSG | LEATHER SHEATH |
| BKW | NONMAGNETIC |
| FSH | NYLON SHEATH |
| FSF | SNAP CLOSURE SHEATH |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDNZ*;ENACDNZ$$DNZ*)
| Table 1 |
| Reply Code (EN02) | Reply |
| NZ | PLASTICS REMOVAL IN THE MARINE ENVIRONMENT (PRIME) PRODUCT |
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
TEXT*GGENERAL CHARACTERISTICS ITEM DESCRIPTION
A RECORDING OF THE PHYSICAL,FUNCTIONAL,AND PERFORMANCE CHARACTERISTICS FOR AN ITEM OF SUPPLY.
Enter clear text.
(TEXTGCLEARTEXT)
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAP2)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information