A compress of absorbent gauze or other suitable material,affixed to film or fabric,coated with pressure-sensitive adhesive substance. it is sterile and impregnated with anaesthetic Lidocaine. The compress may contain a suitable antimicrobial agent. The adhesive surface is protected by a suitable removable covering. The adhesive strip may be perforated and the back may be coatedwhit a water-repellant film. Excludes: ADHESIVE TAPE,SURGICAL and BANDAGE,GAUZE,SELF-ADHERENT.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED80923*)
AKJAJACTIVE MEDICAMENT MEDICINAL STRENGTH
THE INGREDIENTS COMPOUNDED IN A PHARMACEUTICAL PREPARATION AND RECOGNIZED AS HAVING THERAPEUTIC VALUE/S/. /USUALLY REPRESENTATIVE IN THE ITEM NAME GENERIC NOMENCLATURE./
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKJAJUGA6093AB2.0*;AKJAJUGA6093AB2.0$$JUGA6093AB2.1*)
| Table 1 |
| Reply Code (AG53) | Reply |
| GM | GRAMS |
| UG | MICROGRAMS |
| MG | MILLIGRAMS |
| Table 2 |
| Reply Code (AG54) | Reply |
| A6093 | LIDOCAINE |
| A6094 | LIDOCAINE HYDROCHLORIDE |
| Table 3 |
| Reply Code (AG55) | Reply |
| AB | ACTIVE INGREDIENT |
CBBLDFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDAFM*;CBBLDBMS$$DEJQ*)
| Table 1 |
| Reply Code (AN47) | Reply |
| EBY | FEMALE BINDER TYPE |
| BCG | INDIVIDUALLY SEALED |
| EBZ | INDIVIDUALLY WRAPPED |
| ECA | MALE BINDER TYPE |
| CUW | PERFORATED |
| ECB | SEALED IN TUBE |
| DAP | SELF-ADHERING |
| AFM | STERILE |
| ECC | W/APPLICATOR |
| ECD | W/CAMOUFLAGE DYE |
| EJQ | W/IMPREGNATED PAD |
| EBH | WATER RESISTANT |
| BMS | WATERPROOF |
MDESDMEDICAL DESIGNATION AND GRADE
MEDICAL DESIGNATION AND GRADE OR QUALITY OF THE SOLUTE
Enter the applicable reply code from the table below
(MDESDAAL*;MDESDAAB$DAAN*;MDESDAAB$$DAAN*)
| Table 1 |
| Reply Code (AP92) | Reply |
| AAA | AMERICAN CHEMICAL SOCIETY |
| AAL | ANALYZED REAGENT |
| AAN | ANATOMICAL THERAPEUTIC CHEMICAL (ATC) CLASSIFICATION SYSTEM |
| AAG | BRITISH PHARMACEUTICAL CODEX |
| AAB | CHEMICAL,BIOLOGICAL,AND RADIOLOGICAL |
| AAM | INTERNATIONAL NONPROPRIETARY NAME (INN) |
| AAK | MODIFIED |
| AAC | NATIONAL FORMULARY |
| AAD | NEUTRAL PROTAMINE HAGEDORN |
| AAJ | REAGENT |
| AAH | TECHNICAL |
| AAE | UNITED STATES PHARMACOPEIA |
| AAF | VENEREAL DISEASE RESEARCH LABORATORY |
ABMZ*JDIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMZJLA2.0*;ABMZJLA2.0$$JLA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJYB2.0*;ABGLJYB2.0$$JYB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Y | YARDS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJXE*ASIZE DESIGNATOR
A DESIGNATION INDICATING THE SIZE BY WHICH THE ITEM IS COMMERCIALLY KNOWN AND/OR IDENTIFIED.
Enter the alpha-numeric reply with a minimum of one character.
(AJXEAO5)
SHPE*DSHAPE
THE PHYSICAL CONFIGURATION OF THE ITEM.
Enter the applicable reply code from the table below
(SHPEDAFC)
| Table 1 |
| Reply Code (AD07) | Reply |
| AEU | BIAS-CUT |
| AEV | COMPRESSED |
| ACC | CONE |
| AFC | FLAT |
| AGG | FOLDED |
| ALC | OVAL |
| AFU | PLEAT FOLDED |
| AFV | PRE-CUT |
| AND | RECTANGULAR |
| AGU | RECTANGULAR STRIP |
| APH | ROLLED |
| APL | ROUND |
| AGV | SEAMLESS KNIT TUBE, 9 STITCHES PER INCH |
| ASL | SQUARE |
| AHU | STEP-BACK ACCORDION |
| AHV | TELESCOPICALLY FOLDED |
| AXP | TRIANGULAR |
CXKJ*DIMPREGNATION MATERIAL
THE ELEMENT,COMPOUND,OR MIXTURE WITH WHICH THE ITEM IS SATURATED.
Enter the applicable reply code from the table below
(CXKJDCR*;CXKJDBS$$DCC*)
| Table 1 |
| Reply Code (AG62) | Reply |
| CC | ACETONE |
| BQ | ALLANTOIN |
| CD | BUTYLACETATE |
| BR | COLLAGEN |
| BS | COPOLYMER |
| CE | DIBUTYLPHTHALATE |
| BT | DIMETHYL PHTHALATE |
| CN | FIBERGLASS RESIN |
| BU | GLYCERINE WATER |
| BV | ISOPROPYL ALCOHOL |
| BW | METHACRYLATE 50/50 |
| BX | METHYLPARABEN |
| BY | N-BUTYL/ISOBUTYL |
| CQ | PLASTER OF PARIS |
| CR | POLYESTER COTTON RESIN |
| CS | POLYURETHANE RESIN |
| BZ | WITCH HAZEL, 50 PERCENT |
AKKF*JQUANTITY WITHIN EACH UNIT PACKAGE
THE NUMBER OF THE VOLUME,FORM,OR THE DOSAGE WITHIN EACH UNIT PACKAGE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKKFJBK2.0*;AKKFJBK2.0$JBK2.1*)
| Table 1 |
| Reply Code (AG67) | Reply |
| BF | BAG |
| BG | BALL |
| BH | BUNDLE |
| BJ | DOZEN |
| BB | FEET |
| AE | FLUID OUNCES |
| BK | FOOT, ROLL |
| AF | GALLONS |
| BA | GRAMS |
| BC | INCHES |
| AJ | KILOGRAMS |
| AN | OUNCES |
| BL | PACK, FOIL |
| BM | PACKET |
| AR | PINTS |
| AT | QUARTS |
| BN | ROLL |
| BD | SHEET |
| KP | SPONGE |
| AV | STRIP |
| BP | SWAB |
| BQ | TRAY |
| BR | YARD, ROLL |
| BE | YARDS |
CQCT*DPRIMARY CONTAINER TYPE
INDICATES THE TYPE OF CONTAINER/S/ OR SUPPORTING DEVICE/S/ WHICH IS IN DIRECT CONTACT WITH THE ITEM.
Enter the applicable reply code from the table below
(CQCTDATC)
| Table 1 |
| Reply Code (AN65) | Reply |
| AAH | BAG |
| AQA | BAG, CELLOPHANE |
| AAJ | BAG, PLASTIC |
| AQB | BAG, PLASTIC, POLYETHYLENE |
| AAK | BOTTLE |
| ACD | BOX |
| ACE | BOX, DISPENSER |
| ACJ | CAN |
| ACK | CAN, AEROSOL |
| ACR | CANISTER |
| ACX | CARTON |
| AQC | CARTON, DISPENSER |
| AQD | CARTON, DOUBLE SLIDE, W/INNER-POLYETHYLENE BAG |
| ATS | CARTON, W/INNER WATERPROOF POLYETHYLENE BAG |
| AQE | CARTON, W/INNER-POLYETHYLENE BAG |
| ADD | CASE |
| AQF | CASE, W/4 TRAYS |
| AQG | CASE, W/8 TRAYS |
| ADF | DISPENSER |
| AQH | DISPENSER, CARTON |
| AQJ | DISPENSER, PRESSURIZED |
| ADM | ENVELOPE |
| ADN | ENVELOPE, PAPER |
| ADP | ENVELOPE, PLASTIC |
| ASJ | PACK |
| AQL | PACK, FOIL |
| AFL | PACKAGE |
| ATC | PACKAGE, PLASTIC, POLYETHYLENE |
| ADY | PACKET |
| AQM | PACKET, FOIL, W/OVER WRAP OF GERMPROOF PAPER |
| AQN | PACKET, W/OVER WRAP OF GERMPROOF PAPER |
| AGV | PAIL |
| AQP | SPOOL, W/SNAP ON SLEEVE |
| AED | STRIP |
| AFZ | TRAY |
| APD | WRAPPER, PAPER |
AJCN*DPROTECTIVE STORAGE FEATURE
THE PECULIAR STORAGE FEATURE/S/ REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(AJCNDAHU*;AJCNDAHY$DAFX*;AJCNDAHY$$DAFX*)
| Table 1 |
| Reply Code (AA65) | Reply |
| AHY | CONTROLLED ROOM TEMPERATURE |
| AFX | EXPIRATION DATED |
| AHU | NONPHENOLIC GREASE SOLVENT |
| PFS | PROTECT FROM DIRECT SUNLIGHT |
| AHX | REQUIRES CONTROLLED ROOM TEMPERATURE STORAGE BETWEEN 15 TO 30 DEG CELSIUS |
CRYC*DCONTROLLED SUBSTANCE CLASSIFICATION
DRUGS OR SUBSTANCES SUBJECT TO THE PROVISIONS OF THE COMPREHENSIVE DRUG ABUSE PREVENTION AND CONTROL ACT OF 1970.
Enter the applicable reply code from the table below
(CRYCDE)
| Table 1 |
| Reply Code (AP11) | Reply |
| B | SCHEDULE II |
| D | SCHEDULE IV |
| E | SCHEDULE V |
ALCD*GUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter clear text.
(ALCDGCLEARTEXT)
CQPQ*GWARNING AND CAUTION STATEMENTS
THE STATEMENTS REQUIRED TO BE INCLUDED ON THE LABEL OF DRUGS SUBJECT TO PROVISIONS OF THE FEDERAL FOOD,DRUG,AND COSMETIC ACT.
Enter clear text.
(CQPQGCLEARTEXT)
CSLZ*GUSUAL DOSE
THE DOSAGE OF A DRUG, FOLLOWING ITS APPLICATION, AT SUCH TIME INTERVALS AS MAY BE DESIGNATED.
Enter clear text.
(CSLZGCLEARTEXT)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
TEXT*GGENERAL CHARACTERISTICS ITEM DESCRIPTION
A RECORDING OF THE PHYSICAL,FUNCTIONAL,AND PERFORMANCE CHARACTERISTICS FOR AN ITEM OF SUPPLY.
Enter clear text.
(TEXTGCLEARTEXT)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAC2.0*;ABRYJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Y | YARDS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information