FSC Information

1315	Ammunition, 75mm through 125mm

Colloquial Information

No Colloquials assigned to this Approve Item Name at this time

Change List

MRC ARRD has been deleted

MRC AFJK has been deleted

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED80478*)

AHUFDCARTRIDGE DESIGN TYPE

INDICATES THE DESIGN TYPE CHARACTERISTIC OF THE CARTRIDGE.

Enter the applicable reply code from the table below

(AHUFDADH*;AHUFDACR$DADF*;AHUFDACR$$DADF*)

Table 1
	Reply Code (AF43)	Reply
	AAB	ANTIAIRCRAFT
	AAC	ANTIAIRCRAFT-COMMON
	AAD	ANTIPERSONNEL
	AAE	ANTIPERSONNEL-TRACER
	AAF	ARMOR PIERCING
	AAG	ARMOR PIERCING CAPPED
	AAH	ARMOR PIERCING CAPPED-TRACER
	ADT	ARMOR PIERCING CONE STABILIZED DISCARDING SABOT-TRACER
	ADU	ARMOR PIERCING DISCARDING SABOT, FRANGIBLE
	ADP	ARMOR PIERCING FIN STABILIZED DISCARDING SABOT-TRACER
	AAJ	ARMOR PIERCING-INCENDIARY
	AAK	ARMOR PIERCING-INCENDIARY-TRACER
	AAL	ARMOR PIERCING-TRACER
	AAM	BALL
	ACL	BALL, CASELESS
	AAN	BALL, DUPLEX
	AAP	BALL, FRANGIBLE
	AAS	BALL, OVERHEAD FIRE
	ACM	BALL, PARABELLUM
	ADV	BIRD SCARING
	ACR	BLIND LOADED
	AAU	BLIND LOADED AND PLUGGED
	AAV	BLIND LOADED AND TRACER
	AAW	BUCKSHOT
	ACK	CHAFF
	AAX	FLECHETTE
	AAY	FUZE CAVITY LINED
	ACS	FUZE CAVITY LINED PROXIMITY
	AAZ	FUZE CAVITY LINED-NONFRAGMENTATION
	ABA	HIGH CAPACITY
	ABB	HIGH EXPLOSIVE
	ABC	HIGH EXPLOSIVE ANTITANK
	ABD	HIGH EXPLOSIVE ANTITANK-TRACER
	ADN	HIGH EXPLOSIVE ANTITANK-TRACER-MULTIPURPOSE
	ABE	HIGH EXPLOSIVE INCENDIARY
	ACT	HIGH EXPLOSIVE INCENDIARY, BELT DESTRUCTION
	ACW	HIGH EXPLOSIVE INCENDIARY, PLUGGED
	ACX	HIGH EXPLOSIVE INCENDIARY, SELF DESTRUCTIVE
	ABF	HIGH EXPLOSIVE INCENDIARY-TRACER
	ACY	HIGH EXPLOSIVE INCENDIARY-TRACER, SELF DESTRUCTIVE
	ABG	HIGH EXPLOSIVE PLASTIC
	ABH	HIGH EXPLOSIVE PLASTIC-TRACER
	ADD	HIGH EXPLOSIVE SHELL DESTROYING-TRACER
	ABJ	HIGH EXPLOSIVE TRACER
	ACZ	HIGH EXPLOSIVE, PLUGGED
	ADA	HIGH EXPLOSIVE, SELF DESTRUCTIVE
	ADC	HIGH EXPLOSIVE-TRACER, DARK IGNITION
	ADB	HIGH EXPLOSIVE-TRACER, SELF DESTRUCTIVE
	ABK	HIGH PRESSURE TEST
	ABL	HYPERVELOCITY ARMOR PIERCING
	ABM	HYPERVELOCITY ARMOR PIERCING DISCORDING SABOT-TRACER
	ABN	HYPERVELOCITY ARMOR PIERCING-TRACER
	ADE	HYPERVELOCITY TARGET PRACTICE-TRACER
	ABP	ILLUMINATING
	ABQ	INCENDIARY
	ADF	INERT
	ACN	IRRITANT GAS
	ABR	LEAFLET
	ADG	LEAFLET, BASE EJECTION
	AAQ	LONG
	AAR	LONG RIFLE
	ADH	LOW PRESSURE TEST
	ACQ	MATCH
	ABS	NONPERSISTENT GAS
	ABT	PERSISTENT GAS
	ABU	PLAIN SLUG
	ADJ	PROXIMITY
	ADK	PROXIMITY NONFRAGMENTATION
	ABW	RIFLED SLUG
	AAT	SHORT
	ABX	SHOT
	ABY	SMOKE
	ABZ	SMOKE, BASE EJECTION
	ACA	SMOKE, BURSTER
	ACB	SPOTTER-TRACER
	ACP	TACTICAL CS
	ACC	TARGET PRACTICE
	ACD	TARGET PRACTICE-TRACER
	ACE	TRACER
	ACG	TRACER INCENDIARY
	ACH	TRACER W/DETERIORATED TRACER ELEMENT
	ACF	TRACER-HEADLIGHT
	ACJ	WAD CUTTER

AHVP*APROPELLING CHARGE INCREMENT QUANTITY

THE NUMBER OF INCREMENTS WHICH COMPOSE THE PROPELLING CHARGE.

Enter the numeric reply with a minimum of one digit.

(AHVPA10*)

AHVL*APROPELLING CHARGE MODEL NUMBER

THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE PROPELLING CHARGE.

Enter the alpha-numeric reply with a minimum of one character.

(AHVLAA5)

AHVH*AIGNITION CARTRIDGE MODEL NUMBER

THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE IGNITION CARTRIDGE.

Enter the alpha-numeric reply with a minimum of one character.

(AHVHAA8)

ARQTDOPENING LOCATION

THE LOCATION OF THE OPENING ON THE ITEM.

Enter the applicable reply code from the table below

(ARQTDADD*;ARQTDAJB$$DAJD*)

Table 1
	Reply Code (AJ91)	Reply
	AJD	ALONG VERTICAL CORNER
	ABA	BOTTOM
	AJB	CENTER FRONT PANEL
	AJC	CENTER SIDE PANEL
	DNF	ENDS
	AHL	ONE END
	ADD	ONE SIDE
	ABD	TOP

AHUE*ACARTRIDGE MODEL NUMBER

THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE CARTRIDGE.

Enter the alpha-numeric reply with a minimum of one character.

(AHUEAN7)

HUES*DCOLOR

A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.

Enter the applicable reply code from the table below

(HUESDBU0005*;HUESDRE0000$DBR0000*;HUESDRE0000$$DBR0000*)

Table 1
	Reply Code (AD06)	Reply
	BL0000	BLACK
	BL0112	BLACK, US ARMY, 357
	BU0000	BLUE
	BU0250	BLUE, CRYSTAL
	BU0005	BLUE, DARK
	BU0033	BLUE, NAVY
	BR0000	BROWN
	BR0104	BROWN, US ARMY, 356
	MS0013	BUFF
	CL0000	CLEAR
	MS0021	ECRU
	YE0016	GOLDENROD
	GY0007	GRAY, CHARCOAL
	GY0000	GRAY/GREY
	GR0000	GREEN
	GR0487	GREEN, CAMOUFLAGE, US ARMY, 483
	GR0228	GREEN, FED STD 595, 24087
	GR0461	GREEN, FRENCH ARMY
	GR0032	GREEN, LIGHT
	GR0146	GREEN, NEPTUNE
	GR0062	GREEN, OLIVE, 106
	GR0063	GREEN, OLIVE, 107
	GR0081	GREEN, SAGE, US AIR FORCE, 1509
	GR0222	GREEN, US ARMY, 354
	GR0223	GREEN, US ARMY, 355
	GR0080	GREEN, US NAVY, 3428-OBSOLETE
	KH0000	KHAKI
	NA0000	NATURAL
	LD0000	OLIVE DRAB
	LD0002	OLIVE DRAB, FED STD 595, 34087
	LD0021	OLIVE DRAB, FED STD 595, X24087
	LD0033	OLIVE DRAB, FED STD 595, X34087
	LD0019	OLIVE DRAB, US ARMY, 106
	LD0013	OLIVE DRAB, US ARMY, 107
	LD0014	OLIVE DRAB, US ARMY, 177
	LD0020	OLIVE DRAB, US ARMY, 207
	LD0012	OLIVE DRAB, US ARMY, 7
	RG0000	ORANGE
	RG0020	ORANGE, FED STD 595, 12246
	PK0000	PINK
	RE0000	RED
	RU0000	RUSSET
	SL0000	SILVER
	TA0000	TAN
	MS0083	TRANSPARENT-INVALID
	WH0000	WHITE
	YE0000	YELLOW
	YE0038	YELLOW, FED STD 595, 23655

AHUZ*DFUZE TYPE

INDICATES THE TYPE OF FUZE INCLUDED WITH THE ITEM.

Enter the applicable reply code from the table below

(AHUZDA*;AHUZDBC$DAM*;AHUZDBC$$DAM*)

Table 1
	Reply Code (AF46)	Reply
	A	ANY ACCEPTABLE
	AB	BASE DETONATING
	AC	BASE DETONATING, SELF-DESTROYING
	BA	BLACK POWDER TIME TRAIN
	AD	DUMMY
	BB	INERT
	AE	MECHANICAL TIME
	AF	MECHANICAL TIME AND SUPER QUICK
	AG	POINT DETONATING
	AH	POINT DETONATING, SELF-DESTROYING
	BC	POINT INITIATING
	AJ	POINT INITIATING, BASE DETONATING
	BD	PRACTICE
	AK	PROXIMITY
	AM	TIME
	AN	TIME AND SUPER QUICK

AHVB*AFUZE MODEL NUMBER

THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE FUZE.

Enter the alpha-numeric reply with a minimum of one character.

(AHVBAQ5)

AHVA*JFUZE DELAY TIME

THE PERIOD OF ELAPSED TIME BETWEEN INITIATION OF THE FUZE AND DETONATION OF THE CHARGE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AHVAJABA2.0*;AHVAJABA2.0$$JABA2.1*)

Table 1
	Reply Code (AH68)	Reply
	AB	MINUTES
	AC	SECONDS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AHUSDPROJECTILE FILLER TYPE

INDICATES THE TYPE OF FILLER WHICH IS CONTAINED WITHIN THE PROJECTILE.

Enter the applicable reply code from the table below

(AHUSDBB*;AHUSDBM$DBN*;AHUSDBM$$DBN*)

Table 1
	Reply Code (AF45)	Reply
	AB	AMATOL
	AC	AMMONIUM PICRATE
	AD	BARIUM CARBONATE AND STEARIC ACID INERT COMPOSITION
	AE	BLACK POWDER PELLETS
	AH	BLACK POWDER PELLETS AND RED PHOSPHORUS MIXTURE
	AF	BLACK POWDER PELLETS, PLASTER OF PARIS, AND STEARIC ACID
	AJ	CHAFF
	AK	COMPOSITION A
	AL	COMPOSITION A-3
	AM	COMPOSITION B
	AN	CRUDE POLYCHLORNAPTHALENE AND DIATOMACEOUS EARTH MIXTURE
	FB	CYCLONITE
	AQ	DISTILLED MUSTARD GAS
	AR	EDNATOL
	DW	EXPLOSIVE D
	FC	EXPLOSIVE MIXTURE
	AS	GREEN SMOKE MIXTURE
	AT	HEXACHLORENTHANE-ZINC MIXTURE
	AU	HYDROCAL
	FE	I-136
	FF	I-280
	AV	ILLUMINATION COMPOSITION
	FD	INCENDIARY COMPOSITION
	AW	INERT BLUE
	AX	INERT MATERIAL
	AY	INERT YELLOW
	BV	ISOPROPYL METHYLPHOSPHONOFLUORIDATE
	AZ	LEAFLETS
	BA	MAGNESIUM
	FG	MOX
	FH	MOX-2B
	BB	MUSTARD GAS
	BC	MUSTARD-T GAS
	FJ	NQ/M PROPELLANT
	BD	O-CHLOROBENZALMALONONITRITE
	BE	PENTOLITE
	BF	PICRATOL
	BG	PLASTICIZED WHITE PHOSPHORUS
	FK	R-284
	BH	RED SMOKE MIXTURE
	BJ	SAND
	BK	STEEL BALLS
	BL	STEEL FRAGMENTS
	BM	STEEL SLUGS
	BN	SULFUR TRIOXIDE-CHLORSULFONIC ACID MIXTURE
	ET	TETRYL
	FL	TRACER COMPOSITION
	BP	TRINITROTOLUENE, TNT
	BQ	TRITONAL
	BR	VIOLET SMOKE MIXTURE
	BS	WHITE PHOSPHORUS
	BT	YELLOW SMOKE MIXTURE

AMTXAPERCUSSION PRIMER MODEL NUMBER

THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE PERCUSSION PRIMER.

Enter the alpha-numeric reply with a minimum of one character.

(AMTXAD3)

AMTJDPROPELLANT GRANULATION TYPE

INDICATES THE TYPE OF PROPELLANT GRANULATION USED WITH THE ITEM.

Enter the applicable reply code from the table below

(AMTJDAC*;AMTJDAD$DAC*)

Table 1
	Reply Code (AN45)	Reply
	AC	DUAL
	AD	SINGLE

ADZC*DENVIRONMENTAL PROTECTION

THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.

Enter the applicable reply code from the table below

(ADZCDAA*;ADZCDDH$$DAEN*)

Table 1
	Reply Code (AA65)	Reply
	AA	ABRASION RESISTANT
	AB	ACID RESISTANT
	JL	ANTISTATIC TREATED
	WD	BACTERIA RESISTANT
	ND	DUST RESISTANT
	BB	FIRE RESISTANT
	AD	FIRE RETARDANT
	GP	FUNGUS RESISTANT
	BU	GREASE
	BD	HIGH TEMPERATURE
	GR	HUMIDITY RESISTANT
	NS	HYDROSTATIC RESISTANT
	GF	INSECT PROOF
	WE	LEAK RESISTANT
	AS	LOW TEMPERATURE
	AJ	MILDEW RESISTANT
	AAW	MOISTURE RESISTANT
	DH	ODOR
	AK	OIL RESISTANT
	AFZ	PUNCTURE RESISTANT
	AEN	TEAR RESISTANT
	FM	TEMPERATURE RESISTANT
	BQ	VAPOR
	DZ	WATER REPELLENT
	BS	WATER RESISTANT
	AQ	WATERPROOF
	BT	WEATHER RESISTANT

AHVJDSUPPLEMENTARY CHARGE

AN INDICATION OF WHETHER OR NOT A SUPPLEMENTARY CHARGE IS INCLUDED. PLEASE USE MRC ABFF.

Enter the applicable reply code from the table below

(AHVJDB)

Table 1
	Reply Code (AA49)	Reply
	B	INCLUDED
	C	NOT INCLUDED

AMTM*DPROXIMITY FUZE ADAPTABILITY

AN INDICATION OF WHETHER OR NOT THE ITEM IS ADAPTABLE FOR PROXIMITY FUZE.

Enter the applicable reply code from the table below

(AMTMDP)

Table 1
	Reply Code (AJ23)	Reply
	P	ADAPTABLE
	M	NOT ADAPTABLE

AFPQ*DCLOSURE FASTENING TYPE

INDICATES THE TYPE OF DEVICE(S) USED TO SECURE THE CLOSURE OF THE ITEM.

Enter the applicable reply code from the table below

(AFPQDBA*;AFPQDLH$$DAA*)

Table 1
	Reply Code (AE36)	Reply
	AA	ADHESIVE
	AQ	BUCKLE
	AR	BUTTON
	LR	CAP
	KT	CLASP
	KW	CLIP
	AC	COHESIVE
	KX	ELASTIC TIE
	LK	FOLD
	AS	FOLD-DOWN METAL FASTENER
	KY	FOLDING LOCK TOP
	KZ	GUMMED FLAP
	LB	HANDLE SEAL
	AG	HASP
	AT	HEAT SEAL
	MA	HOOK-PILE, FASTENER TAPE
	LC	INTERLOCKING SEAL
	LD	LAP-OVER TOP
	LH	LOCK TOP
	AH	LOOPED/TWISTED WIRE
	LE	METAL CLIP
	KS	PLUG
	AX	PRESS FASTENER
	LL	PRESSURE SEAL
	LF	SCREW TOP
	EF	SELF-CLOSING
	AY	SELF-CLOSING VALVE
	LG	SELF-LOCKING FLAP
	AZ	SEWN
	AW	SLIDE FASTENER
	AN	SLIDE LATCH
	BA	SNAP FASTENER
	BC	STRAP
	BB	STRING
	LA	TAPE SEAL
	BD	TIE STRING
	BE	TURN BUTTON
	LJ	TWIST

AHVQDWEAPON FOR WHICH DESIGNED

AN INDICATION OF THE WEAPON/S/ FOR WHICH THE ITEM IS DESIGNED.

Enter the applicable reply code from the table below

(AHVQDADK*;AHVQDABV$DADG*;AHVQDABV$$DADG*)

Table 1
	Reply Code (AF49)	Reply
	AAB	AIRCRAFT MACHINE GUN M2
	A	ANY ACCEPTABLE
	AAC	AUTOMATIC PISTOL
	AAD	AUTOMATIC PISTOL M1911
	AAE	AUTOMATIC PISTOL M1911A1
	AAF	AUTOMATIC RIFLE M1918
	AAG	AUTOMATIC RIFLE M1918A2
	AAH	CARBINE M1
	AAJ	CARBINE M1A1
	AAK	CARBINE M2
	AAL	CARBINE M3
	AAM	COLT REVOLVER
	AAN	CONVERTED RIFLE M1
	ABA	GUN M1916
	AAP	GUN M1A2
	AAQ	GUN M1A3
	AAS	GUN M23
	AAT	GUN M26
	AAR	GUN M2A1
	AAU	GUN M3
	AAW	GUN M32
	AAV	GUN M3A1
	AAX	GUN M5
	AAY	GUN M51
	AAZ	GUN M6
	AEP	GUN MK1
	ABB	GUN T156
	AEL	GUN, ANTI-AIRCRAFT 40 MM
	ANK	GUN, AUTOMATIC GAU-12
	AMM	GUN, AUTOMATIC GAU-8
	AFJ	GUN, AUTOMATIC M1A2
	AMX	GUN, CANNON L7A2/M68
	AMY	GUN, CANNON L7A3/M68
	AFK	GUN, CANNON M1
	AGM	GUN, CANNON M113
	AGN	GUN, CANNON M139
	AKQ	GUN, CANNON M162
	AFL	GUN, CANNON M1A1
	AFM	GUN, CANNON M1A2
	AFN	GUN, CANNON M1A3
	AFP	GUN, CANNON M2
	AFS	GUN, CANNON M24
	AFT	GUN, CANNON M24A1
	AFQ	GUN, CANNON M2A1
	AFR	GUN, CANNON M3
	AFW	GUN, CANNON M32
	AFX	GUN, CANNON M35
	AFY	GUN, CANNON M36
	AFZ	GUN, CANNON M39
	AGA	GUN, CANNON M39A2
	AMN	GUN, CANNON M39A3
	AGB	GUN, CANNON M41
	AGC	GUN, CANNON M46
	AGD	GUN, CANNON M48
	AGE	GUN, CANNON M54
	AGF	GUN, CANNON M58
	AGG	GUN, CANNON M59
	AGH	GUN, CANNON M61
	AMP	GUN, CANNON M61A1
	AGJ	GUN, CANNON M66
	AGK	GUN, CANNON M68
	AMQ	GUN, CANNON M693
	AGL	GUN, CANNON M81
	AGP	GUN, CANNON MK1
	AGQ	GUN, CANNON T154
	AGR	GUN, CANNON T212
	AGS	GUN, CANNON XM135
	AGT	GUN, CANNON XM140
	AGW	GUN, CANNON XM168
	ABC	GUN, HAND RAMMED MK21 AND MODS
	ABD	GUN, HAND RAMMED MK22 MODS 0 THRU 3
	ABE	GUN, POWER RAMMED MK22 MODS 4 THRU 9
	ABF	GUN, POWER RAMMED MK27
	AKR	GUN-LAUNCHER M81
	AGX	HOWITZER, CANNON M1
	AHH	HOWITZER, CANNON M103
	AHJ	HOWITZER, CANNON M126
	AHK	HOWITZER, CANNON M137
	AMR	HOWITZER, CANNON M185
	AMT	HOWITZER, CANNON M1950
	AMS	HOWITZER, CANNON M199
	AGY	HOWITZER, CANNON M1A1
	AGZ	HOWITZER, CANNON M2
	AHA	HOWITZER, CANNON M2A1
	AHB	HOWITZER, CANNON M2A2
	AHC	HOWITZER, CANNON M4
	AHE	HOWITZER, CANNON M45
	AHF	HOWITZER, CANNON M47
	AHG	HOWITZER, CANNON M49
	AHD	HOWITZER, CANNON M4A1
	ABJ	KRAG RIFLE M1898
	AEN	LAUNCHER, GRENADE M79
	AEM	LAUNCHER, HELICOPTER M75
	ABK	LYLE LINE THROWING GUN
	ABL	LYLE LINE THROWING GUN MK1 MOD 1
	ABM	MACHINE GUN
	ABN	MACHINE GUN AN-M2
	ABP	MACHINE GUN AN-M3
	ABY	MACHINE GUN M1916A6
	ABZ	MACHINE GUN M1917A1
	ACA	MACHINE GUN M1917A2
	ACB	MACHINE GUN M1917A4
	ACC	MACHINE GUN M1917A5
	ACD	MACHINE GUN M1917A6
	ACE	MACHINE GUN M1918
	ACF	MACHINE GUN M1918A2
	ACG	MACHINE GUN M1919
	ACH	MACHINE GUN M1919A4
	ACJ	MACHINE GUN M1919A5
	ACK	MACHINE GUN M1919A6
	ANL	MACHINE GUN M197
	ABQ	MACHINE GUN M2
	ABR	MACHINE GUN M2A1
	ABS	MACHINE GUN M3
	ABT	MACHINE GUN M37
	ABU	MACHINE GUN M60
	ABV	MACHINE GUN M63
	ABW	MACHINE GUN M73
	ABX	MACHINE GUN M85
	ACL	MACHINE GUN T52
	ACM	MACHINE GUN XM134
	AEQ	MATCH
	ACN	MINNI GUN M134
	AMU	MORTAR M081-61
	ACP	MORTAR M19
	ACQ	MORTAR M2
	ACR	MORTAR M30
	ACS	MORTAR T18E6
	AHL	MORTAR, CANNON M1
	AHN	MORTAR, CANNON M19
	AHM	MORTAR, CANNON M2
	AHP	MORTAR, CANNON M29
	AHQ	MORTAR, CANNON M30
	AHR	MORTAR, CANNON MK2
	AHS	MORTAR, CANNON MK4
	ACT	PISTOL
	AHT	RECOILLESS RIFLE M18
	AHW	RECOILLESS RIFLE M18A1
	AMV	RECOILLESS RIFLE M2 CARL GUSTAV
	AHX	RECOILLESS RIFLE M20
	AHY	RECOILLESS RIFLE M27
	AHZ	RECOILLESS RIFLE M27A1
	AJA	RECOILLESS RIFLE M40A1
	AJB	RECOILLESS RIFLE M40A1C
	AJC	RECOILLESS RIFLE M67
	AJD	RECOILLESS RIFLE T15E16
	AJE	RECOILLESS RIFLE T21E12
	ACU	REVOLVER
	ACV	REVOLVER M1917
	AMW	REVOLVER NO2
	ACW	RIFLE
	ACX	RIFLE M1
	ACY	RIFLE M14
	ACZ	RIFLE M16
	ADA	RIFLE M16E1
	ADD	RIFLE M1903
	ADE	RIFLE M1903A
	ADF	RIFLE M1903A1
	ADG	RIFLE M1903A3
	ADH	RIFLE M1903A4
	ADJ	RIFLE M1917
	ADB	RIFLE M2
	ADC	RIFLE M23
	ADK	RIFLE T44
	ADL	RIFLE T48
	ADM	RIFLE XM16B1
	ADY	S AND W REVOLVER
	ADP	SALUTING GUN 40 MM
	ADQ	SEMIAUTOMATIC PISTOL M1911
	ADN	SPOTTING RIFLE M8
	ADR	SUBCALIBER RIFLE M1903A2
	ADS	SUBMACHINE GUN
	ADT	SUBMACHINE GUN M1
	ADX	SUBMACHINE GUN M1928A1
	ADU	SUBMACHINE GUN M1A1
	ADV	SUBMACHINE GUN M3
	ADW	SUBMACHINE GUN M3A1

CZEF*JCARTRIDGE CASE LENGTH

A MEASUREMENT OF THE LONGEST DIMENSION OF A CARTRIDGE CASE,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CZEFJL2.0*)

Table 1
	Reply Code (AF47)	Reply
	L	MILLIMETER

ABFY*JOVERALL DEPTH

AN OVERALL MEASUREMENT BETWEEN SPECIFIED POINTS OF AN ITEM,IN DISTINCTION FROM HEIGHT.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABFYJAA2.0*;ABFYJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABHP*JOVERALL LENGTH

THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

GRWT*JGROSS WEIGHT

THE COMBINED WEIGHT OF THE ITEM AND ITS LOADED CONTENTS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(GRWTJEKAS2.0*;GRWTJEKAS2.0$$JEKAS2.1*)

Table 1
	Reply Code (AD28)	Reply
	AR	PALLET
	EJ	PALLET DOMESTIC, US NAVY
	EK	PALLET FLEET, US NAVY
	ED	PALLET, US AIR FORCE
	EE	PALLET, US ARMY
	EF	PALLET, US MARINE CORPS
	EB	SHIPPING CONTAINER

Table 2
	Reply Code (AG67)	Reply
	AJ	KILOGRAMS
	AS	POUNDS

ABKW*JOVERALL HEIGHT

THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CZKA*JPACKAGE REFERENCE NUMBER

AN ALPHA-NUMERIC CODE IDENTIFYING THE DRAWING AND/OR SPECIFICATION WHICH CONTROLS THE LOADING OF THE PACKAGE.

Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.

(CZKAJAR2.0*;CZKAJAR2.0$$JAR2.1*)

Table 1
	Reply Code (AF94)	Reply
	AA	AUSTRALIAN ARMY
	AR	ROYAL AUSTRALIAN AIR FORCE
	AU	ROYAL AUSTRALIAN NAVY
	AB	US AIR FORCE
	AC	US ARMY
	AD	US MARINE CORPS
	AE	US NAVY

ABMK*JOVERALL WIDTH

AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

EXWT*JNET EXPLOSIVE WEIGHT

THE NET WEIGHT OF THE EXPLOSIVE CONTENT OF THE ITEM FOR TRANSPORTATION AND/OR STORAGE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(EXWTJBBRAS2.0*;EXWTJBBRAS2.0$$JBBRAS2.1*)

Table 1
	Reply Code (AH21)	Reply
	BBQ	STORAGE
	BBR	TRANSPORTATION

Table 2
	Reply Code (AG67)	Reply
	AJ	KILOGRAMS
	AS	POUNDS

ADAV*JOVERALL DIAMETER

A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADAVJAA2.0*;ADAVJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADJT*JINSIDE WIDTH

AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADJTJAA2.0*;ADJTJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADJU*JINSIDE LENGTH

A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADJUJAB2.0*;ADJUJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

HMCC*JHAZARDOUS MATERIAL CLASSIFICATION CODE

AN ALPHA-NUMERIC CODE IDENTIFYING A GROUP OR CLASSIFICATION OF VARIOUS MATERIALS AS TO THEIR POTENTIAL TO CAUSE EXPLOSIONS,FIRES OR DAMAGE BY CHEMICAL ACTION.

Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.

(HMCCJAB2.0*;HMCCJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AP66)	Reply
	AB	COAST GUARD CLASS
	AC	DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION
	AD	DEPARTMENT OF TRANSPORTATION CLASS
	AE	DEPARTMENT OF TRANSPORTATION EXEMPTION
	AF	FIREFIGHTING GROUP
	AG	HAZARD SYMBOL
	AH	INHABITED BUILDING DISTANCE
	AJ	LOADING-STOWAGE
	AK	STORAGE COMPATIBILITY GROUP

AFEF*JINSIDE DEPTH

AN INSIDE MEASUREMENT BETWEEN SPECIFIED POINTS OF AN ITEM,IN DISTINCTION FROM HEIGHT.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AFEFJAB2.0*;AFEFJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

WLBL*ADOT WARNING LABEL CODE

THE WARNING LABEL CODE ASSIGNED BY THE DEPARTMENT OF TRANSPORTATION (DOT) TO EACH PACKAGE OR CONTAINMENT DEVICE OFFERED FOR TRANSPORTATION OF A HAZARDOUS MATERIAL WHICH MEETS ONE OR MORE HAZARD CLASS DEFINITIONS IN ACCORDANCE WITH THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE. THIS MRC HAS BEEN DISCONTINUED WITH NO REPLACEMENT - THIS INFORMATION IS NOT CHARACTERISTIC INFORMATION, THIS INFORMATION NEEDS TO BE INPUT IN SEG G OF THE TIR.

Enter the alpha-numeric reply with a minimum of one character.

(WLBLAA5)

AFMQ*JINSIDE HEIGHT

AN INSIDE MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN ITEM,IN DISTINCTION FROM DEPTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AFMQJAC2.0*;AFMQJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

SHPN*ADOT PROPER SHIPPING NAME

THE PROPER SHIPPING NAME AS IDENTIFIED BY THE DEPARTMENT OF TRANSPORTATION (DOT) AND LISTED IN THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE.

Enter the alpha-numeric reply with a minimum of one character.

(SHPNAV0)

AJRL*JMINOR INSIDE WIDTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AJRLJAC2.0*;AJRLJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

DENN*ADOT IDENTIFICATION NUMBER

THE IDENTIFICATION NUMBER ASSIGNED BY THE DEPARTMENT OF TRANSPORTATION (DOT) TO EACH PROPER SHIPPING NAME. IDENTIFICATION NUMBERS PRECEDED BY THE LETTERS "UN" ARE ASSOCIATED WITH INTERNATIONAL AS WELL AS DOMESTIC TRANSPORTATION AND THOSE PRECEDED BY THE LETTERS "NA" ARE NOT RECOGNIZED FOR INTERNATIONAL TRANSPORTATION OF HAZARDOUS MATERIALS (DANGEROUS GOODS) EXCEPT TO AND FROM THE UNITED STATES AND CANADA.

Enter the alpha-numeric reply with a minimum of one character.

(DENNAY2)

AQPL*JFACE WIDTH

A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE FACE,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AQPLJAB2.0*;AQPLJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

HAZD*ADOT HAZARD CLASS/DIVISION

A DESIGNATION OF THE HAZARD CLASS OR DIVISION CORRESPONDING TO EACH PROPER SHIPPING NAME FOR HAZARDOUS MATERIAL AS IDENTIFIED BY THE DEPARTMENT OF TRANSPORTATION (DOT) AND LISTED IN THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE.

Enter the alpha-numeric reply with a minimum of one character.

(HAZDAH4)

ARRR*JBOTTOM WIDTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ARRRJAA2.0*;ARRRJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

DTRC*ADOT REGISTRATION CODE

AN ALPHA-NUMERIC CODE ASSIGNED BY THE DEPARTMENT OF TRANSPORTATION IDENTIFYING THE FINAL HAZARD CLASSIFICATION.

Enter the alpha-numeric reply with a minimum of one character.

(DTRCAU0)

DDACADOD AMMUNITION CODE

A NINE /9/ CHARACTER SEMISIGNIFICANT NUMBER DIVIDED INTO TWO PARTS BY A HYPHEN CENTRALLY ASSIGNED TO GENERIC DESCRIPTIONS APPLICABLE TO ITEMS OF SUPPLY IN FSG 13 AND 14.

Enter the applicable code.

(DDACA1340-H725*)

ARRS*JGUSSET WIDTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ARRSJAB2.0*;ARRSJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ARRT*JNECK OPENING WIDTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ARRTJAB2.0*;ARRTJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ARRW*JTOP WIDTH

A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE MEASURED LENGTH OF THE TOP TAKEN AS A UNIT OF MEASURE,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ARRWJAA2.0*;ARRWJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ARRE*JNOMINAL TEXTILE WEIGHT AND LOCATION

THE NOMINAL WEIGHT OF THE TEXTILE AND ITS LOCATION.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ARREJAGAHY2.0*;ARREJAGAHY2.0$$JAGAHY2.1*)

Table 1
	Reply Code (AG69)	Reply
	AP	GRAMS PER SQUARE METER
	AG	OUNCES PER SQUARE YARD

Table 2
	Reply Code (AJ91)	Reply
	AJA	CUSHIONING
	AHY	FIFTH WALL
	AHS	FIRST WALL
	AHX	FOURTH WALL
	AHT	SECOND WALL
	AHR	SINGLE WALL
	AHZ	SIXTH WALL
	AHW	THIRD WALL

ARRP*GPREPRINTED LEGEND

THE DESCRIPTIVE,INSTRUCTIONAL LEGEND/S/,AND/OR SYMBOL/S/ PREPRINTED ON THE ITEM.

Enter clear text.

(ARRPGCLEARTEXT)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION

A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.

Enter the Reply Code from the table below.

(ELCDDA*)

Table 1
	Reply Code (AN58)	Reply
	A	ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

SUPP*GSUPPLEMENTARY FEATURES

CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.

Enter the reply in clear text.Separate multiple replies with a semicolon.

(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

IF STYLE/REPLY CODE(s) BQ OR BV WERE ENTERED FOR MRC ENAC, YOU MUST ANSWER MRC (ALAX)

ENAC*DENVIRONMENTAL ATTRIBUTE CODE

INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.

Enter the applicable reply code from the table below

(ENACDJK*;ENACDBQ$$DE8*)

Table 1
	Reply Code (EN02)	Reply
	E8	COMPREHENSIVE PROCUREMENT GUIDELINE - NON-PAPER OFFICE PRODUCTS - PLASTIC ENVELOPES
	E7	COMPREHENSIVE PROCUREMENT GUIDELINE - NON-PAPER OFFICE PRODUCTS - PLASTIC TRASH BAGS
	JK	COMPREHENSIVE PROCUREMENT GUIDELINE - PAPER AND PAPER PRODUCTS - PAPERBOARD AND PACKAGING PRODUCTS
	JL	COMPREHENSIVE PROCUREMENT GUIDELINE - PAPER AND PAPER PRODUCTS - PRINTING AND WRITING PAPERS
	BQ	FILMS - NON-DURABLE - BIOBASED
	BV	FILMS - SEMI-DURABLE - BIOBASED

ALAX*BBIOBASED CONTENT PERCENTAGE

THE STATED PERCENTAGE OF THE ITEM'S CONTENT THAT IS BIOBASED.

Enter a reply with a minimum of one digit on either side of the decimal point.

(ALAXB2.0)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

This MRC replaced MRC ZZZP

The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.

PDNB*APURCHASE DESCRIPTION IDENTIFICATION

THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.

Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.

(PDNBA81A37-30624A*)

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZV*GFSC APPLICATION DATA

THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.

Enter the name of the next higher classifiable assembly in clear text.

(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)

ZZZW*GDEPARTURE FROM CITED DOCUMENT

THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.

Enter the reply in clear text.

(ZZZWGAS MODIFIED BY MATERIAL*)

ZZZX*GDEPARTURE FROM CITED DESIGNATOR

THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.

Enter the reply in clear text.

(ZZZXGAS MODIFIED BY MATERIAL*)

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

PPRM*BPOST-CONSUMER RECOVERED MATERIALS PERCENTAGE

THE PERCENTAGE OF THE POST-CONSUMER RECOVERED OR RECYCLED MATERIAL INCLUDED IN THE ITEM.

Enter a reply with a minimum of one digit on either side of the decimal point.

(PPRMB2.0)

BBRG*DSTORAGE TYPE

INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.

Enter the applicable reply code from the table below

(BBRGDAN*;BBRGDAH$DAD*;BBRGDAH$$DAD*)

Table 1
	Reply Code (AM81)	Reply
	AC	CLOSED SHED
	AD	CONTROLLED HUMIDITY WAREHOUSE
	AM	DEHUMIDIFIED WAREHOUSE
	AE	GENERAL PURPOSE WAREHOUSE
	AN	HEATED WAREHOUSE
	AH	OPEN SHED
	AJ	UNHEATED WAREHOUSE