Any set of instructions designed to be interpreted and executed by a machine such as COMPUTER,DIGITAL; MEMORY,PORTABLE,SOLID STATE and the like. It may be necessary for the operation of technological equipment or be used by a user to facilitate his work. Types of software include but are not limited to firmware, middleware, application, and system type software. It may be downloadable or delivered on physical media. Documentation giving instructions on how to use them may be included.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED80021*)
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJLC2.0*;ABHPJLC2.0$$JLC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALVQGLICENSE AGREEMENT
THE NAME, NUMBER AND DESCRIPTION OF LICENSE ABOUT THE PROGRAM.
Enter clear text.
(ALVQGCLEARTEXT)
ALVRJPROGRAM TYPE
PROGRAM TYPE AND QUANTITY
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(ALVRJAR2*;ALVRJAR2$$JAR3*;ALVRJAR2$JAR2*)
| Table 1 |
| Reply Code (PT01) | Reply |
| AC | APPLICATION |
| AB | COMPILATION |
| AG | CONSOLE |
| AK | DRAWING |
| AA | EXPLOITATION SYSTEM |
| AL | GAMES |
| AE | INSTRUCTIONS |
| AM | INSTRUCTIONS |
| AJ | MAPPING |
| AH | MOBILE DEVICE APPLICATION |
| AN | MODELING |
| AP | PHOTOGRAPHIC |
| AQ | PUBLICATION |
| AD | RULE |
| AR | SPREEDSHEET |
| AU | TRAINING |
| AF | UTILITY |
| AS | VIDEO |
| AT | WORD PROCESSING |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJLA2.0*;ABMKJLA2.0$$JLA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRAJREQUIRED CAPACITY OF THE WORKING MEMORY
THE AMOUNT OF MEMORY WHICH MUST BE AVAILABLE IN ORDER FOR THE PROGRAM TO FUNCTION.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(ABRAJMNTEXT1234*)
| Table 1 |
| Reply Code (AG67) | Reply |
| MT | BYTES |
| ML | GIGABYTES |
| MM | KILOBYTES |
| MN | MEGABYTES |
| CU | TERABYTES |
CYCXGMANUFACTURERS PROGRAM NAME
THE MANUFACTURERS NAME OF THE PROGRAM THAT IS STORED ON THE ITEM.
Enter clear text.
(CYCXGCLEARTEXT)
AYDS*GEND ITEM NAME
THE APPROVED ITEM NAME OR PART NAME OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter clear text.
(AYDSGCLEARTEXT)
CYHT*DPHYSICAL TAPE FORMAT TYPE
INDICATES THE TYPE OF PHYSICAL TAPE FORMAT USED.
Enter the applicable reply code from the table below
(CYHTDAAE*;CYHTDAAF$DAAD*;CYHTDAAF$$DAAD*)
| Table 1 |
| Reply Code (AJ79) | Reply |
| AAE | CARTRIDGE |
| AAD | CASSETTE |
| AAF | OPEN REEL |
CYHQ*BTRANSFER RATE IN MEGABYTES PER SECOND
THE RATE THAT INFORMATION IS TRANSFERRED FROM ONE SOURCE TO ANOTHER,EXPRESSED IN MEGABYTES PER SECOND.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CYHQB2.0)
CYFR*BACCESS TIME IN MILLISECONDS
THE TIME REQUIRED TO POSITION THE ACCESS MECHANISM AT A SPECIFIED POSITION IN MILLISECONDS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CYFRB2.0)
ALVP*DPHYSICAL PROGRAM SUPPORT TYPE
INDICATES THE TYPE OF PHYSICAL SUPPORT USED FOR STORING OR TRANSFERRING THE PROGRAM.
Enter the applicable reply code from the table below
(ALVPDMGD*;ALVPDUSB$DFLD*;ALVPDUSB$$DFLD*)
| Table 1 |
| Reply Code (AP91) | Reply |
| ACD | COMPACT DISC |
| DVD | DIGITAL VERSATILE DISC |
| EPR | ERASABLE PROGRAMMABLE READ ONLY MEMORY |
| FLD | FLASH DRIVE |
| FPD | FLOPPY DISK |
| HRD | HARD DRIVE |
| KYD | KEY DRIVE |
| MGD | MAGNETIC DRIVE |
| AAA | MAGNETIC TAPE |
| ASD | SECURE DIGITAL |
| SER | SERVER |
| SSD | SOLID-STATE DRIVE |
| USB | UNIVERSAL SERIAL BUS DRIVE |
AKUK*DDATA PROTECTION PROVISION TYPE
THE TYPE OF DATA PROTECTION THAT IS INCLUDED WITH THE ITEM.
Enter the applicable reply code from the table below
(AKUKDBP*;AKUKDAH$$DAA*)
| Table 1 |
| Reply Code (AM04) | Reply |
| AH | DIFFUSION-TRANSFER PROCESSING |
| BP | DIRECT |
| AP | IDENTIFICATION |
| AA | PASSWORD |
| BB | RECORDING |
BPLM*DDISK TYPE
INDICATES THE TYPE OF DISK.
Enter the applicable reply code from the table below
(BPLMDASG*;BPLMDADA$DADA*;BPLMDADA$$DADA*)
| Table 1 |
| Reply Code (AK95) | Reply |
| ADA | MAGNETIC |
| ASG | OPTICAL |
CYHP*DDISK SIZE
DESIGNATES THE DISK SIZE INCLUDED WITH THE ITEM.
Enter the applicable reply code from the table below
(CYHPDAAP*;CYHPDAAJ$DAAH*;CYHPDAAJ$$DAAH*)
| Table 1 |
| Reply Code (AP82) | Reply |
| AAG | 11.00 |
| AAJ | 12.00 |
| AAB | 3.00 |
| AAC | 3.50 |
| AAP | 4.624 |
| AAD | 5.25 |
| AAE | 7.00 |
| AAH | 8.00 |
| AAF | 9.00 |
APWE*ADISK QUANTITY
THE NUMBER OF DISKS INCLUDED WITH THE ITEM.
Enter the numeric reply with a minimum of one digit.
(APWEA10*)
CYQB*DPROGRAMMING LANGUAGE
AN ARTIFICIAL LANGUAGE FOR EXPRESSING THE PROGRAM.
Enter the applicable reply code from the table below
(CYQBDAAF*;CYQBDAAD$DAAD*;CYQBDAAD$$DAAD*)
| Table 1 |
| Reply Code (AP83) | Reply |
| AAF | BASIC |
| AAD | C |
CYQC*DOPERATING SYSTEM TYPE/NAME
THE DESIGNATION FOR A SYSTEM PROGRAM WHICH ENABLES THE USER TO HAVE ACCESS TO AND USE THE COMPUTER ARCHITECTURE AND PERIPHERY.
Enter the applicable reply code from the table below
(CYQCDAAC*;CYQCDAAA$DAAD*;CYQCDAAA$$DAAD*)
| Table 1 |
| Reply Code (AP84) | Reply |
| AAG | MACINTOSH |
| AAA | MS DOS |
| AAD | OS/2 |
| AAE | WINDOWS |
| AAC | WORKBENCH |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDDWW)
| Table 1 |
| Reply Code (AN47) | Reply |
| GFA | DOWNLOADABLE PROGRAM |
| AWD | POSITIVE OUTPUTS |
| GFB | PROGRAM ON PHYSICAL SUPPORT |
| AWF | PROGRAMMABLE |
| AWG | PROGRAMMED |
| DWW | RECTANGULAR TUBULAR BED END |
| FNY | ROHS DIRECTIVE COMPLIANCE |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
ALXZ*GSPECIFIC USAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter clear text.
(ALXZGCLEARTEXT)
BCYX*GPROGRAM TITLE
AN INDICATION OF THE PROGRAM TITLE.
Enter clear text.
(BCYXGCLEARTEXT)
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY*;NHCFDCY$DCY*;NHCFDCY$$DCY*)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information