A hand-held rotary tool, having either a drill chuck or taper socket. The tool is powered by a gasoline engine and may include drill accessories and the like.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED80019*)
BRZT*JNO LOAD SPEED IN RPM
THE SPEED AT WHICH AN ITEM CAN BE OPERATED UNDER A NO LOAD CONDITION,EXPRESSED IN REVOLUTIONS PER MINUTE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BRZTJA2.0*;BRZTJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CTKZ*JANGLE
THE ANGLE BETWEEN DESIGNATED POINTS ON AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTKZJR2.0*)
| Table 1 |
| Reply Code (AP38) | Reply |
| D | DEGREES |
| R | RADIANS |
IF STYLE/REPLY CODE(s) AAB WERE ENTERED FOR MRC BRZX, YOU MUST ANSWER MRC (CTKZ)
BRZX*DDRIVE FOR WHICH DESIGNED
AN INDICATION OF THE DRIVE FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(BRZXDAAC)
| Table 1 |
| Reply Code (AN40) | Reply |
| AAB | ANGULAR |
| AAC | STRAIGHT |
BRZRDDRIVE END TYPE
INDICATES THE TYPE OF DRIVE END PROVIDED.
Enter the applicable reply code from the table below
(BRZRDADS*;BRZRDACR$DACY*)
| Table 1 |
| Reply Code (AK84) | Reply |
| ACR | COLLET CHUCK |
| ADS | EXTERNAL |
| ALJ | FEMALE SPINDLE |
| ADT | INTERNAL |
| ACS | KEYED JAW CHUCK |
| ACT | KEYLESS JAW CHUCK |
| ACW | MALE SPINDLE |
| ACX | MORSE TAPER SOCKET |
| ACY | SOCKET CHUCK |
BRZZ*DPLUG CONNECTOR TYPE
INDICATES THE TYPE OF PLUG CONNECTOR PROVIDED.
Enter the applicable reply code from the table below
(BRZZDAQ*;BRZZDAM$DAL*)
| Table 1 |
| Reply Code (AK12) | Reply |
| AL | 2-PRONG |
| AM | 3-PRONG |
| AQ | 4-PRONG |
ABBB*DSPEED ADJUSTMENTS
THE DIFFERENT SPEEDS AT WHICH THE ITEM MAY BE OPERATED.
Enter the applicable reply code from the table below
(ABBBDQ*;ABBBDA$$DB*)
| Table 1 |
| Reply Code (AB03) | Reply |
| A | SINGLE SPEED |
| B | TWO SPEED |
| Q | VARIABLE SPEED |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AMRN*JSIZE DESIGNATOR
A DESIGNATION INDICATING THE SIZE BY WHICH THE ITEM IS COMMERCIALLY KNOWN AND/OR IDENTIFIED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AMRNJAB2.0*;AMRNJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AQWFJSOCKET TAPER SIZE DESIGNATOR
THE INDUSTRIAL DESIGNATION OR TERM USED TO DEFINE THE SOCKET TAPER SIZE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(AQWFJABTEXT1234*)
| Table 1 |
| Reply Code (AH09) | Reply |
| AD | BROWN AND SHARPE |
| AC | JARNO |
| AB | MORSE |
BGGMDAUXILIARY HANDLE LOCATION
INDICATES THE LOCATION OF THE AUXILIARY HANDLE(S) ON THE ITEM.
Enter the applicable reply code from the table below
(BGGMDABA*;BGGMDABD$DAEG*;BGGMDABD$$DAEG*)
| Table 1 |
| Reply Code (AJ91) | Reply |
| ABA | BOTTOM |
| ABC | FRONT |
| AEG | LEFT HAND SIDE |
| AEQ | RIGHT HAND SIDE |
| ABD | TOP |
AKYD*GACCESSORY COMPONENTS AND QUANTITY
THE NAME AND NUMBER OF PARTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter clear text.
(AKYDGCLEARTEXT)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDFKZ*;CBBLDFLA$$DEDH*)
| Table 1 |
| Reply Code (AN47) | Reply |
| FKZ | 360 DEGREE SIDE HANDLE |
| FLA | BELT CLIP |
| FLB | BUILT-IN LEVEL |
| FHU | CORDLESS |
| FCF | DOUBLE INSULATED |
| FDJ | ELECTROMAGNETIC INTERFERENCE SUPPRESSION |
| CZC | FUNGUS RESISTANT |
| EDH | NONREVERSIBLE |
| FLC | PADDLE SWITCH |
| BWW | REVERSIBLE |
| FLD | SHOCKPROOF |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDNZ*;ENACDNR$$DNR*)
| Table 1 |
| Reply Code (EN02) | Reply |
| NZ | PLASTICS REMOVAL IN THE MARINE ENVIRONMENT (PRIME) PRODUCT |
| NR | REVIEWED - DOES NOT MEET SOME ENAC CRITERIA |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| CS | CONSTRUCTION |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| FN | FINISH |
| FM | FORM |
| FA | FORMULA |
| GR | GRADE |
| GP | GROUP |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| NR | NUMBER |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| QA | QUALITY |
| RN | RANGE |
| RT | RATING |
| RF | REFERENCE NUMBER |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CJJWGENGINE BRAKE HORSEPOWER AT SPECIFIED RPM
THE POWER DELIVERED BY THE ENGINE AT SPECIFIED REVOLUTIONS PER MINUTE.
Enter clear text.
(CJJWGCLEARTEXT)
BZZW*DMOTOR ARMATURE AXIS POSITION
AN INDICATION OF THE POSITION OF THE MOTOR ARMATURE AXIS.
Enter the applicable reply code from the table below
(BZZWDAG)
| Table 1 |
| Reply Code (AG19) | Reply |
| AD | HORIZONTAL AIRSTREAM, ARM HORIZONTAL |
| AE | HORIZONTAL AIRSTREAM, ARM VERTICAL, VANE DOWN |
| AG | PARALLEL TO SAW BLADE SPINDLE AXIS |
| AF | RIGHT ANGLE TO SAW BLADE SPINDLE AXIS |
| AC | VERTICAL-DOWN AIRSTREAM |
| AB | VERTICAL-UP AIRSTREAM |
AAXZ*ACYLINDER QUANTITY
THE NUMBER OF CYLINDERS INCORPORATED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AAXZA10*)
ARNADCOOLANT TYPE
INDICATES THE TYPE OF COOLANT USED WITH THE ITEM.
Enter the applicable reply code from the table below
(ARNADBH*;ARNADAS$DAV*)
| Table 1 |
| Reply Code (AL57) | Reply |
| AB | AIR |
| BH | AMMONIA, TECHNICAL |
| BD | CARBON DIOXIDE |
| BJ | CARBON DIOXIDE, TECHNICAL |
| BM | CARRENE-500 |
| BF | FLUORINATED HYDROCARBON |
| AD | FREON-11 |
| AM | FREON-113 |
| AN | FREON-114 |
| AP | FREON-114B2 |
| AQ | FREON-115 |
| AR | FREON-116 |
| AE | FREON-12 |
| AF | FREON-13 |
| AG | FREON-13B1 |
| AH | FREON-14 |
| AS | FREON-142 |
| AJ | FREON-21 |
| AK | FREON-22 |
| AL | FREON-23 |
| BN | FREON-500 |
| AW | FREON-502 |
| AT | FREON-C-318 |
| AV | FREON-R134A |
| AZ | GENETRON-115 |
| BA | GENETRON-142B |
| BB | GENETRON-152A |
| AX | GENETRON-21 |
| AY | GENETRON-23 |
| AA | HFC-134A |
| BC | KULENE-131 |
| BE | METHYL CHLORIDE |
| BG | METHYL CHLORIDE, TECHNICAL |
| BP | OIL |
| AU | PROPYLENE GLYCOL |
| BK | R-12 |
| BL | R-22 |
| BQ | R-410A |
| AC | WATER |
FUELDFUEL TYPE
INDICATES THE TYPE OF FUEL(S) FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(FUELDEX*;FUELDGG$DHU*;FUELDGG$$DHU*)
| Table 1 |
| Reply Code (AF80) | Reply |
| AX | 100/130 OCTANE GASOLINE |
| AY | 115/145 OCTANE GASOLINE |
| ER | 50/50 FFO |
| ES | 75/50 FFO |
| AV | 80/87 OCTANE GASOLINE |
| AW | 91/96 OCTANE GASOLINE |
| CB | A-1 |
| BZ | ACETYLENE |
| GK | AIR |
| FE | ALCOHOL |
| GR | AMMONIA |
| CQ | ARGON |
| GS | ARGON-OXYGEN |
| CA | ARTIFICIAL GAS |
| CZ | AVGAS 100/130 |
| CY | AVGAS 100/130 LOW LEAD |
| DA | AVGAS 115/145 |
| CX | AVGAS 80/87 |
| BD | AVIATION FUEL |
| DB | AVTAG |
| DC | AVTUR |
| FJ | B2 BIODIESEL |
| FH | B20 BIODIESEL |
| FK | B5 BIODIESEL |
| GT | BROMOCHLOROMETHANE |
| GU | BROMOTRIFLUOROMETHANE |
| BR | BURNER FUEL NO.1 |
| BS | BURNER FUEL NO.2 |
| AE | BUTANE |
| GV | BUTANE PROPANE MIXTURE |
| GL | CARBON DIOXIDE |
| GW | CARBON MONOXIDE |
| GX | CHLORINE |
| GY | CHLORINE TRIFLUORIDE |
| GZ | CHLOROFLUOROHYDROCARBON |
| HA | CHLOROTETRAFLUOROETHANE |
| DD | CIVGAS |
| DE | COMBATGAS |
| GQ | COMPRESSED AIR |
| BU | CRUDE OIL, SOUR |
| BV | CRUDE OIL, SWEET |
| HB | CYCLOPROPANE |
| DH | DF-1 |
| CV | DF1 LOW SULFUR |
| AS | DF-1 WINTER DIESEL FUEL OIL |
| DJ | DF-2 |
| DU | DF2 LOW SULFUR |
| DK | DF-2 OVERSEAS PROCUREMENT |
| AT | DF-2 REGULAR DIESEL FUEL OIL |
| AU | DF-4 HEAVY DIESEL FUEL OIL |
| DF | DFA |
| AR | DF-A ARCTIC DIESEL FUEL OIL |
| CU | DFA LOW SULFUR |
| DG | DFM |
| HC | DICHLORODIFLUOROMETHANE |
| HD | DICHLOROTETRAFLUOROETHANE |
| HE | DICHLOROTRIFLUOROETHANE |
| BJ | DIESEL |
| CG | DIESEL FUEL OIL |
| CJ | DIESEL FUEL OIL NO. 2 |
| CK | DIESEL FUEL OIL NO. 3 |
| BQ | DIESEL OIL |
| FM | DIESEL, HIGH SULFUR |
| FN | DIESEL, HIGH SULFUR, ARCTIC |
| FP | DIESEL, HIGH SULFUR, LOW TEMP |
| FQ | DIESEL, LOW SULFUR |
| FR | DIESEL, LOW SULFUR, ARCTIC |
| FS | DIESEL, LOW SULFUR, LOW TEMP |
| FT | DIESEL, MARINE |
| FU | DIESEL, OVERSEAS PROCUREMENT |
| FV | DIESEL, ULTRA-LOW SULFUR |
| FW | DIESEL, ULTRA-LOW SULFUR, LOW TEMP |
| HF | DIFLUOROETHANE |
| FA | DISTILLATE FUEL |
| FL | E85 FUEL ETHANOL |
| GM | ETHYLENE OXIDE |
| AL | FS NO. 1 BURNER FUEL OIL |
| AM | FS NO. 2 BURNER FUEL OIL |
| AN | FS NO. 4 BURNER FUEL OIL |
| AP | FS NO. 5 BURNER FUEL OIL |
| AQ | FS NO. 6 BURNER FUEL OIL |
| BX | FS NO.1 |
| BY | FS NO.2 |
| BT | FUEL OIL |
| DL | FUEL OIL NO. 1 |
| DM | FUEL OIL NO. 2 |
| DN | FUEL OIL NO. 4 |
| DP | FUEL OIL NO. 5 HEAVY |
| DQ | FUEL OIL NO. 5 LIGHT |
| DR | FUEL OIL NO. 6 |
| CL | FUEL OIL, GRADE 1 |
| CM | FUEL OIL, GRADE 2 |
| ET | GASOHOL |
| GA | GASOHOL, UNLEADED, MIDGRADE |
| GB | GASOHOL, UNLEADED, PREMIUM |
| GC | GASOHOL, UNLEADED, REGULAR |
| BC | GASOLINE |
| BK | GASOLINE JP4 ARCTIC DIESEL |
| BM | GASOLINE JP4 DIESEL |
| GD | GASOLINE, LEADED, PREMIUM |
| GE | GASOLINE, LEADED, REGULAR |
| FX | GASOLINE, REFORMULATED, MIDGRADE |
| FY | GASOLINE, REFORMULATED, PREMIUM |
| FZ | GASOLINE, REFORMULATED, REGULAR |
| GH | GASOLINE, UNLEADED, MIDGRADE |
| GF | GASOLINE, UNLEADED, PREMIUM |
| GG | GASOLINE, UNLEADED, REGULAR |
| HG | HALOGEN |
| CR | HELIUM |
| HH | HELIUM-OXYGEN MIXTURE |
| BH | HYDROCARBON FUEL |
| CS | HYDROGEN |
| HJ | HYDROGEN SULFIDE |
| DV | IFO |
| CN | JET A |
| DS | JET A-1 |
| EU | JET A-50 |
| BF | JET FUEL |
| DW | JP-1 |
| BG | JP-2 JET FUEL |
| AG | JP-3 JET FUEL |
| DX | JP-4 |
| AH | JP-4 JET FUEL |
| DY | JP-5 |
| AJ | JP-5 JET FUEL |
| AK | JP-6 JET FUEL |
| CP | JP-7 |
| DZ | JP-8 |
| DT | JP-TS |
| CC | JP-TS JET FUEL |
| EA | KERO/B |
| AC | KEROSENE |
| FB | KEROSENE 1K |
| FC | KEROSENE 2K |
| BL | LIGHT DIESEL |
| AZ | LIQUID PETROLEUM GAS |
| GN | LIQUID PROPANE |
| BN | MANUFACTURED |
| BA | MANUFACTURED GAS |
| HK | METHYL BROMIDE |
| HL | METHYL CHLORIDE, GAS |
| EB | MG-I |
| EC | MG-II ARCTIC GRADE |
| EV | MGO |
| FD | MIDGRADE MOGAS UNLEADED |
| BB | MIXED GAS |
| HM | MONOCHLORODIFLUOROMETHANE |
| CH | MULTIFUEL |
| FF | NAPHTA |
| BP | NATURAL |
| AD | NATURAL GAS |
| ED | NAVAL 0 POUR |
| EE | NAVAL 20 POUR |
| CT | NITROGEN |
| GJ | NITROGEN, DRY |
| HN | NITROGEN-OXYGEN |
| GP | NITROUS OXIDE |
| HP | NITROUS OXYGEN |
| AA | NONCOMPRESSED AIR |
| EF | NSFO |
| HQ | NUCLEAR COUNTER GAS MIXTURE |
| CW | OXYGEN |
| HR | PETROLEUM |
| EG | PREMIUM MOGAS LEADED |
| EW | PREMIUM MOGAS UNLEADED |
| EX | PRESSURE APPLIANCE FUEL |
| AF | PROPANE |
| HS | PROPANE, LIQUID |
| EH | REFEREE FOR JP-4 |
| CD | REFEREE FOR JP-4 JET FUEL |
| EJ | REFEREE FOR JP-5 |
| CE | REFEREE FOR JP-5 JET FUEL |
| HT | REFRIGERANT 114 |
| HU | REFRIGERANT GAS MIXTURE |
| HV | REFRIGERANTS |
| EK | REGULAR (47/0 DIESO) |
| EL | REGULAR MOGAS LEADED |
| EY | REGULAR MOGAS UNLEADED |
| CF | RJ-1 |
| AB | SOLID FUEL |
| EM | SPECIAL GRADE MOGAS LOW LEAD |
| EZ | SPECIAL GRADE MOGAS UNLEADED |
| EN | SUB-ZERO DIESO |
| HW | SULPHUR DIOXIDE, GASEOUS |
| HX | SULPHUR HEXAFLUORIDE |
| FG | UNLEADED GASOLINE |
| EP | VV-G-109 WHITE GAS |
| EQ | VV-K-211 KEROSENE |
| BW | WHITE GASOLINE |
AXDP*DSTARTING METHOD
THE MEANS USED TO START THE ITEM.
Enter the applicable reply code from the table below
(AXDPDAAL*;AXDPDAAM$DACZ*)
| Table 1 |
| Reply Code (AC58) | Reply |
| AFY | ADJUSTABLE |
| AAB | AIR |
| ACM | AUDIBLE |
| AAC | AUTOMATIC |
| AFU | AUTOMATIC NONRECYCLING |
| AFV | AUTOMATIC RECYCLING |
| AAS | AUTOMATICALLY TRIGGERED |
| AGZ | AUTONOMOUS |
| AFG | AXIAL STRESS |
| ADC | BATTERY OPERATED PUMP |
| AFH | BENDING BEAM |
| AHF | BEVEL |
| AHD | BUCKLE |
| ACY | BUOYANCY |
| AEV | BUTTON |
| AEW | BUTTON OVER |
| AEX | BUTTON PISTOL GRIP |
| AEY | BUTTON UNDER |
| AHA | CABLE |
| ACG | CAM |
| AGS | CARBON |
| ACN | CARD |
| AFR | CARTRIDGE |
| ABR | CASSETTE |
| AHN | CHAIN |
| ACZ | COMPRESSED AIR |
| AGH | COMPUTER NUMERICAL CONTROL |
| AAT | CONTINUOUS MULTIPLEXING |
| AHP | CONTROL BAR |
| AGT | CRYSTAL |
| AGU | DIAPHRAGM |
| AFL | DISPOSABLE BATTERY |
| AHG | DOUBLE HELICAL |
| ACQ | DOUBLE PUSH BUTTON |
| ADZ | DUAL KNOB |
| AGV | DYNAMIC |
| AAZ | ELECTRIC |
| ACC | ELECTRIC CURRENT |
| AAD | ELECTRIC MOTOR |
| AAL | ELECTRICAL |
| ACW | ELECTRICAL CONDUCTANCE |
| ADA | ELECTRICAL MOTOR |
| ABZ | ELECTRODE |
| AEU | ELECTROMAGNETIC |
| ACX | ELECTRONIC |
| AGF | FILTER DISK |
| AGA | FIXED POSITION |
| AEZ | FLEXIBLE HOSE |
| AGL | FOOT |
| AHQ | FOOT-LEVER |
| ADD | FRICTION |
| ABA | FRICTIONAL |
| ADE | GAS |
| ABD | GEAR |
| AAM | GEAR DRIVE |
| ACA | GLOW PLUG |
| AEA | GRIP HANDLE |
| AGD | HAMMER |
| AFF | HAND |
| ABC | HANDLE |
| ADF | HANDLE ON BOTH SIDES |
| AEC | HANDLE ON INSIDE |
| ADG | HANDLE ON OUTSIDE |
| AHR | HAND-LEVER |
| AHH | HELICAL |
| ABE | HELICAL GEAR |
| AHT | HORIZONTAL |
| WH | HUMAN INTERFACE VIA COMPUTER BASED CONSOLE |
| AAE | HYDRAULIC |
| ACH | HYDRAULIC CYLINDER |
| ACJ | HYDRAULIC EXPANDER TUBE |
| ACF | HYDRAULIC MOTOR |
| AHJ | HYPOID |
| ACT | IMPACT |
| AAW | INDEPENDENT |
| AHB | INFRARED |
| ADH | INSIDE DOOR PULL |
| AER | INSIDE SECRET LEVER |
| AET | INSIDE SLIDING BOLT |
| AEE | INSIDE THUMBPIECE |
| AEF | INSIDE TURN KNOB |
| ACP | KEY |
| ABH | KEY LEVER |
| AEG | KEY WHEN STOP IS SET |
| ABS | KEYBOARD |
| ABJ | KNOB |
| AED | KNOB ON INSIDE |
| AEH | KNOB ON OUTSIDE |
| ADJ | LATCH |
| AAQ | LATERAL |
| AAK | LEG REST |
| ABK | LEVER |
| ADK | LEVER HANDLE |
| ADL | LEVER ON INSIDE |
| ADM | LEVER ON OUTSIDE |
| AFA | LEVER OVER |
| AFB | LEVER UNDER |
| ABL | LIGHT INTENSITY |
| AGW | MAGNETIC |
| ABT | MAGNETIC CARD |
| ABX | MAGNETIC TAPE |
| AAF | MANUAL |
| AGE | MANUAL COMPRESSION |
| ADX | MANUAL WITH GEAR UNIT |
| AAJ | MECHANICAL |
| AAN | MECHANICAL FLAP DRIVE |
| ADB | MECHANICAL SPRING |
| ACD | MECHANICAL STRIKER |
| AFN | MEMBRANE |
| ACV | MICROPRISM SPOT |
| ABF | MULTIPLE GEAR |
| ACU | NONIMPACT |
| AGJ | NUMERICAL CONTROL |
| WG | NUT |
| AEJ | OUTSIDE KEY |
| ADN | OUTSIDE KEY WHEN STOP IS SET |
| ADP | OUTSIDE LATCH |
| AEL | OUTSIDE PULL KNOB |
| AEK | OUTSIDE SLIDE KNOB |
| ADQ | OUTSIDE THUMBPIECE |
| AEM | OUTSIDE TURN KNOB |
| AFQ | OVERHEAD CONSOLE |
| ACE | PIEZO-ELECTRIC ELEMENT |
| ACB | PILOT |
| AFC | PISTOL GRIP |
| AHK | PLANETARY |
| AHS | PLIER |
| ABB | PNEUMATIC |
| ACK | PNEUMATIC CYLINDER |
| AAH | POWERED |
| AFZ | PRESET |
| AFS | PRESSURE |
| AGQ | PRESSURE-RELEASE |
| AGB | PROGRAMMABLE |
| AAU | PROPELLER |
| AGR | PULL |
| AEN | PULL KNOB |
| AEP | PULL RING |
| ABW | PUNCHED CARD |
| ABY | PUNCHED TAPE |
| ABQ | PUSH BUTTON |
| ADR | PUSH BUTTON ON OUTSIDE |
| AHC | RADIO |
| AFK | RECHARGEABLE BATTERY |
| AGM | RECOIL |
| AEQ | RELEASE BAR ON INSIDE |
| ADS | RELEASE BAR ON OUTSIDE |
| AGY | REMOTE CONTROL |
| AHX | RING |
| WJ | RING |
| ABU | ROTARY |
| AAR | ROTATIONAL |
| ADT | SCREWDRIVER |
| AFJ | SHEAR |
| AGN | SHORT RECOIL |
| AGP | SLIDE ACTION |
| AES | SLIDE KNOB |
| ABV | SLIDING VANE |
| AFM | SOLAR CELL |
| AAG | SOLENOID |
| ABM | SOUND VIBRATION |
| AHL | SPUR |
| ADY | STEAM |
| AFT | STILL |
| ABN | SWITCH |
| AAP | SYNCHRO |
| AGK | TEMPLATE TRACING |
| AFX | TEST |
| AEB | T-HANDLE |
| ADU | THUMB PIECE |
| ACR | THUMBWHEEL |
| AHV | TILT |
| AAX | TIME SHARING MULTIPLEXING |
| AAY | TIME SHARING TIME DELAY |
| ABP | TIMER |
| ACS | TOGGLE |
| AHE | TONGUE |
| AFW | TORCH |
| AFP | TOUCH PAD |
| AHW | TRACKBALL |
| AFD | TRIGGER |
| AFE | TRIGGER UNDER |
| AGC | TURBINE |
| ADV | TURN KNOB |
| AAA | ULTRASONIC |
| ACL | UPWARD |
| AAV | VANE |
| AHU | VERTICAL |
| ADW | WING NUT |
| AGG | WIRE FABRIC |
| AHM | WORM |
| ABG | WRENCH |
AXJM*DMAIN POWER TAKEOFF ROTATION DIRECTION
THE DIRECTION OF THE MAIN POWER TAKEOFF ROTATION,WHEN VIEWED FROM AND FACING THE MAIN DRIVE END.
Enter the applicable reply code from the table below
(AXJMDB)
| Table 1 |
| Reply Code (AB50) | Reply |
| K | BOTTOM TO TOP |
| A | CLOCKWISE |
| M | CLOCKWISE UP |
| D | COUNTERCLOCKWISE |
| N | COUNTERCLOCKWISE DOWN |
| B | LEFT TO RIGHT |
| J | LEFT TO RIGHT, RIGHT TO LEFT-ZERO CENTER |
| F | LEFT TO RIGHT-RIGHT TO LEFT |
| G | LEFT TO RIGHT-ZERO CENTER |
| E | RIGHT TO LEFT |
| H | RIGHT TO LEFT-ZERO CENTER |
| C | TOP TO BOTTOM |
| L | TOP TO BOTTOM-BOTTOM TO TOP |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAB2.0*;ABKWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information