An item installed on an oxygen mask, it is opened with a strong inspiration by the wearer which allows ambient air to pass through. Permits bi-directional air flow. Does not have a stem.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED68501*)
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDXXB000*;SFTTDPCY000$DPCAN00*;SFTTDPCY000$$DPCAN00*)
| Table 1 |
| Reply Code (SF01) | Reply |
| AL1100 | ALUMINUM ALLOY 1100 |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| DCA000 | DICHROMATE |
| ENA000 | ENAMEL |
| AUA000 | GOLD |
| GFA000 | GRAPHITE |
| LQA000 | LACQUER |
| MTB000 | MOLYBDENUM |
| NLA000 | NICKEL |
| XXB000 | OXIDE |
| XXA000 | OXIDE FILM |
| PNA000 | PAINT |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PCAJ00 | PLASTIC CELLULOSE NITRATE |
| PCB000 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCY000 | PLASTIC POLYURETHANE |
| PCAN00 | PLASTIC TETRAFLUOROETHYLENE |
| PRA000 | PRIMER |
| SNA000 | TIN |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
IF STYLE/REPLY CODE(s) A1A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CCFG and CWCL and CWCR)
IF STYLE/REPLY CODE(s) A2A, A3A, A5A OR A7A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CCFG and CWCF)
IF STYLE/REPLY CODE(s) A5 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ACJN)
IF STYLE/REPLY CODE(s) A5A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCF and CCFG and ACJN)
IF STYLE/REPLY CODE(s) A6A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCF and CCFG)
IF STYLE/REPLY CODE(s) A8 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWDD)
IF STYLE/REPLY CODE(s) E1A, E8A, E32A OR E44A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CCFG and CWCF)
IF STYLE/REPLY CODE(s) E2A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CCFG and CWCF and CWCL)
IF STYLE/REPLY CODE(s) E3A OR E19A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CCFG and CWCL and CWCR and CWCZ)
IF STYLE/REPLY CODE(s) E4, E28 OR E31 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWDD)
IF STYLE/REPLY CODE(s) E5A, E7A, E9A, E10A, E12A, E18A, E20A, E33A, E39A, E40A OR E45A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCR and CWCL and CCFG)
IF STYLE/REPLY CODE(s) E6, E14, E27, E29 OR E37 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ACJN)
IF STYLE/REPLY CODE(s) E6A OR E37A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCF and ACJN and CCFG)
IF STYLE/REPLY CODE(s) E14A OR E16A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ACJN and CWCR and CCFG and CWCL)
IF STYLE/REPLY CODE(s) E17A, E21A OR E29A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCF and CCFG and ACJN and CWCL)
IF STYLE/REPLY CODE(s) E22A OR E27A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCW and CCFG and ACJN and CWCL and CWCR)
IF STYLE/REPLY CODE(s) E23A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CCFG and CWCW and CWCL and CWCR)
IF STYLE/REPLY CODE(s) E25A OR E28A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CCFG and CWCL and CWCW and CWCR and CWDD)
IF STYLE/REPLY CODE(s) E31A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCR and CWCL and CWCZ and CWCW and CCFG and CWDD)
IF STYLE/REPLY CODE(s) E33A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CCFG and CWCL and CWCR)
IF STYLE/REPLY CODE(s) E34A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCW and CCFG and CWCL and CWCR)
IF STYLE/REPLY CODE(s) E11A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CCFG and CWCW and CWCF)
IF STYLE/REPLY CODE(s) E16, E17, E21 OR E22 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ACJN)
IF STYLE/REPLY CODE(s) E25 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWDD)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLE24A)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| BU10073 | A1 | ANGLE |
| BU10088 | A10 | SCREW-IN CARTRIDGE |
| BU10074 | A1A | ANGLE FLANGED ENDS |
| BU10075 | A2 | STRAIGHT THRU |
| BU10076 | A2A | STRAIGHT THRU FLANGED ENDS |
| BU10077 | A3 | STRAIGHT THRU |
| BU10078 | A3A | STRAIGHT THRU FLANGED ENDS |
| BU10079 | A4 | STRAIGHT THRU |
| BU10080 | A4A | STRAIGHT THRU FLANGED ENDS |
| BU10081 | A5 | OFFSET |
| BU10082 | A5A | OFFSET FLANGED ENDS |
| BU10083 | A6 | STRAIGHT THRU |
| BU10234 | A6A | STRAIGHT THRU FLANGED ENDS |
| BU10084 | A7 | TEE |
| BU10085 | A7A | TEE FLANGED ENDS |
| BU10086 | A8 | STRAIGHT THRU |
| BU10087 | A9 | STRAIGHT THRU DROP-IN CARTRIDGE |
| BU10001 | E1 | STRAIGHT THRU |
| BU10018 | E10 | STRAIGHT THRU |
| BU10019 | E10A | STRAIGHT THRU FLANGED ENDS |
| BU10020 | E11 | CROSS |
| BU10021 | E11A | CROSS FLANGED ENDS |
| BU10022 | E12 | ANGLE |
| BU10023 | E12A | ANGLE FLANGED ENDS |
| BU10024 | E14 | ANGLE W/OFFSET |
| BU10025 | E14A | ANGLE W/OFFSET FLANGED ENDS |
| BU10026 | E16 | ANGLE W/OFFSET |
| BU10027 | E16A | ANGLE W/OFFSET FLANGED ENDS |
| BU10028 | E17 | CROSS W/OFFSET |
| BU10029 | E17A | CROSS W/OFFSET FLANGED ENDS |
| BU10030 | E18 | STRAIGHT THRU |
| BU10031 | E18A | STRAIGHT THRU FLANGED ENDS |
| BU10032 | E19 | CROSS |
| BU10033 | E19A | CROSS FLANGED ENDS |
| BU10002 | E1A | STRAIGHT THRU FLANGED ENDS |
| BU10003 | E2 | CROSS |
| BU10035 | E20 | STRAIGHT THRU |
| BU10036 | E20A | STRAIGHT THRU FLANGED ENDS |
| BU10034 | E21 | CROSS W/OFFSET |
| BU10037 | E21A | CROSS W/OFFSET FLANGED ENDS |
| BU10038 | E22 | TEE W/OFFSET |
| BU10039 | E22A | TEE W/OFFSET FLANGED ENDS |
| BU10040 | E23 | CROSS |
| BU10041 | E23A | CROSS FLANGED ENDS |
| BU10042 | E24 | CROSS |
| BU10043 | E24A | CROSS FLANGED ENDS |
| BU10044 | E25 | TEE W/OFFSET |
| BU10045 | E25A | TEE W/OFFSET FLANGED ENDS |
| BU10046 | E27 | TEE W/OFFSET |
| BU10047 | E27A | TEE W/OFFSET FLANGED ENDS |
| BU10048 | E28 | TEE W/OFFSET |
| BU10049 | E28A | TEE W/OFFSET FLANGED ENDS |
| BU10050 | E29 | CAPS W/OFFSET |
| BU10051 | E29A | CROSS W/OFFSET FLANGED ENDS |
| BU10004 | E2A | CROSS FLANGED ENDS |
| BU10005 | E3 | CROSS |
| BU10052 | E31 | STRAIGHT THRU |
| BU10053 | E31A | STRAIGHT THRU FLANGED ENDS |
| BU10054 | E32 | STRAIGHT THRU |
| BU10055 | E32A | STRAIGHT THRU FLANGED ENDS |
| BU10056 | E33 | STRAIGHT THRU |
| BU10057 | E33A | STRAIGHT THRU FLANGED ENDS |
| BU10058 | E34 | TEE W/OFFSET |
| BU10059 | E34A | TEE W/OFFSET FLANGED ENDS |
| BU10060 | E37 | TEE W/OFFSET |
| BU10061 | E37A | TEE W/OFFSET FLANGED ENDS |
| BU10062 | E39 | ANGLE |
| BU10063 | E39A | ANGLE FLANGED ENDS |
| BU10006 | E3A | CROSS FLANGED ENDS |
| BU10007 | E4 | STRAIGHT THRU |
| BU10064 | E40 | ANGLE W/OFFSET |
| BU10065 | E40A | ANGLE W/OFFSET FLANGED ENDS |
| BU10235 | E44 | STRAIGHT THRU |
| BU10066 | E44A | STRAIGHT THRU FLANGED ENDS |
| BU10067 | E45 | ANGLE |
| BU10068 | E45A | ANGLE FLANGED ENDS |
| BU10069 | E46 | SCREW-IN CARTRIDGE |
| BU10070 | E47 | DROP-IN CARTRIDGE |
| BU10071 | E48 | OFFSET |
| BU10072 | E49 | ANGLE DROP-IN CARTRIDGE FLANGED |
| BU10008 | E5 | "Y" ANGLE |
| BU10009 | E5A | "Y" ANGLE FLANGED ENDS |
| BU10011 | E6 | STRAIGHT THRU W/OFFSET |
| BU10010 | E6A | STRAIGHT THRU W/OFFSET FLANGED ENDS |
| BU10012 | E7 | ANGLE |
| BU10013 | E7A | ANGLE FLANGED ENDS |
| BU10014 | E8 | STRAIGHT THRU Y-PATTERN |
| BU10015 | E8A | STRAIGHT THRU Y-PATTERN FLANGED ENDS |
| BU10016 | E9 | "Y" ANGLE |
| BU10017 | E9A | "Y" ANGLE FLANGED ENDS |
ACJN*JOFFSET DISTANCE
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACJNJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CCFG*JVALVE SIZE
DESIGNATES THE SIZE OF THE VALVE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CCFGJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCF*JFACE TO FACE DISTANCE
THE FACE TO FACE DISTANCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCFJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCL*JFIRST CONNECTION FACE TO CENTERLINE DISTANCE
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCLJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCR*JSECOND CONNECTION FACE TO CENTERLINE DISTANCE
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCRJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWDD*JCENTER TO CENTER DISTANCE
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWDDJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCW*JTHIRD CONNECTION FACE TO CENTERLINE DISTANCE
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCWJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCZ*JFOURTH CONNECTION FACE TO CENTERLINE DISTANCE
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCZJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
ADQU*DFLOW CONTROL DEVICE
THE PART THAT CONTROLS THE FLOW THROUGH THE ITEM.
Enter the applicable reply code from the table below
(ADQUDAC*;ADQUDBP$DAA*)
| Table 1 |
| Reply Code (AC57) | Reply |
| AA | BALL |
| AC | CONE |
| BP | DISK |
| CW | PISTON |
| AW | POPPET |
| DH | SLIDE |
AQLRDVALVE OPERATION METHOD
THE MEANS USED TO CONTROL THE OPERATION OF THE VALVE.
Enter the applicable reply code from the table below
(AQLRDAAC*;AQLRDAAF$DAAC*)
| Table 1 |
| Reply Code (AC58) | Reply |
| AAC | AUTOMATIC |
| AAF | MANUAL |
AKGG*JNOMINAL LENGTH
A NOMINAL MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKGGJA2.0*;AKGGJA2.0$JA2.0*;AKGGJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the alpha-numeric reply with a minimum of one character.
(AAJDAM6)
BBJX*DMOUNTING POSITION
THE INSTALLED POSITION FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(BBJXDHR*;BBJXDVT$DHR*)
| Table 1 |
| Reply Code (AM84) | Reply |
| HR | HORIZONTAL |
| VT | VERTICAL |
ADZH*DRENEWABLE SEAT RING TYPE
INDICATES THE TYPE OF RENEWABLE SEATING RING IN THE ITEM.
Enter the applicable reply code from the table below
(ADZHDAB*;ADZHDAF$DAD*)
| Table 1 |
| Reply Code (AC69) | Reply |
| AA | BOLTED |
| AB | BONDED |
| AC | PRESSED-IN |
| AD | RETAINING SCREW |
| AE | THREADED |
| AF | WELDED |
IF STYLE/REPLY CODE(s) B, C, D OR E WERE ENTERED FOR MRC ADSR, YOU MUST ANSWER MRC (ADST)
ADSR*DBONNET TYPE
INDICATES THE TYPE OF HOUSING ON THE ITEM THAT ACCOMMODATES THE STEM PACKING OR SPRING.
Enter the applicable reply code from the table below
(ADSRDD)
| Table 1 |
| Reply Code (AC62) | Reply |
| B | EXPOSED SPRING |
| C | INSIDE SCREW |
| D | INSIDE SPRING |
| E | OUTSIDE SCREW-YOKE |
| G | PACKING RETAINING |
ADST*DBONNET ATTACHMENT METHOD
THE MEANS BY WHICH THE BONNET IS ATTACHED TO THE ITEM.
Enter the applicable reply code from the table below
(ADSTDAS*;ADSTDAK$DAB*)
| Table 1 |
| Reply Code (AB47) | Reply |
| AK | BOLTED |
| AB | CLAMP |
| AL | INTEGRAL |
| AM | PRESSURE SEAL, RING TYPE |
| AP | THREADED |
| AR | U-BOLT |
| AQ | UNION |
| AS | WELDED |
ADSU*DDISK LOADING METHOD
THE MEANS OF CLOSING THE ITEM WHEN INLET PRESSURE DECREASES.
Enter the applicable reply code from the table below
(ADSUDC)
| Table 1 |
| Reply Code (AC63) | Reply |
| B | SPRING |
| C | WEIGHT |
CSDC*JOPENING PRESSURE SETTING
THE PREDETERMINED PRESSURE AT WHICH THE ITEM IS CALIBRATED TO OPEN.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSDCJB2.0*)
| Table 1 |
| Reply Code (AN71) | Reply |
| B | BAR |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
AZGM*DMOUNTING FACILITY
THE FACILITY FOR MOUNTING THE ITEM.
Enter the applicable reply code from the table below
(AZGMDABH)
| Table 1 |
| Reply Code (AM39) | Reply |
| ABC | BRACKET(S) |
| BJY | BULKHEAD |
| ABH | CLAMP |
| ABN | LUG(S) |
| AED | PANEL |
| AKB | THREADED FASTENER |
| BWX | WAFER |
TMQY*JFURNISHED ITEMS AND QUANTITY
THE NAME AND NUMBER OF THOSE PARTS FURNISHED WITH THE ITEM OF SUPPLY THAT HAVE NOT BEEN SPECIFIED ELSEWHERE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TMQYJBFS2*;TMQYJBFS2$$JBFS3*)
| Table 1 |
| Reply Code (AB28) | Reply |
| ACH | ADAPTER |
| ABR | BOLT |
| ACJ | BRAZING RING |
| AJM | BUSHING |
| AEL | CAP |
| AMM | CHAIN |
| BFG | CHAIN WHEEL |
| AKG | COVER |
| BFK | DEFLECTOR CAP |
| AKH | FERRULE |
| AZA | FILTER |
| AHD | FILTER SCREEN |
| ACM | FLOAT |
| ACN | GASKET |
| ADM | GROMMET |
| AQF | HANDLE |
| BFQ | HANDWHEEL |
| BLH | INDICATOR |
| BFR | INSULATING BLANKET |
| BFS | LEVER |
| ASC | LOCKING DEVICE |
| ABW | NUT |
| ACQ | NUT-SLEEVE |
| AEZ | ORIFICE PLATE |
| ACR | PLUGGED DRAIN |
| BFW | REDUCER |
| BFX | RELIEF PLUG |
| ACW | SIGHT GAGE |
| AMY | SPRING |
| AFM | STRAINER |
| ABH | SWITCH |
| ACZ | TAILPIECE |
| AJW | WASHER |
| ADA | WRENCH |
AEQJ*JMINIMUM OPERATING TEMP
THE MINIMUM TEMPERATURE AT WHICH THE ITEM IS DESIGNED TO OPERATE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEQJJC2.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDABB*;CBBLDAAX$$DABB*)
| Table 1 |
| Reply Code (AN47) | Reply |
| AAX | BONNET PACKING |
| ABB | VALVE STEM LOCK SHIELD |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ052*;HZRDDHAZ011$$DHAZ012*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ042 | ASBESTOS |
| HAZ008 | CADMIUM |
| HAZ011 | CHROMIUM |
| HAZ012 | COPPER |
| HAZ029 | LEAD |
| HAZ030 | MAGNESIUM ALLOY |
| HAZ052 | ZINC |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information