A cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.

FSC Information

1650	Aircraft Hydraulic, Vacuum, and De-icing System Components
2090	Miscellaneous Ship and Marine Equipment
2530	Vehicular Brake, Steering, Axle, Wheel, and Track Components
2590	Miscellaneous Vehicular Components
3040	Miscellaneous Power Transmission Equipment

Colloquial Information

H5454	HEAD ACCUMULATOR
G4166	HEAD,FLUID ACCUMULATOR

Change List

ISAC Reply 3AEE added to MRC CYCL.

ISAC Reply 3AGQ added to MRC CYCL.

ISAC Reply 3HOU added to MRC CYCL.

ISAC Reply 1A deleted from MRC CYCL.

ISAC Reply 1B deleted from MRC CYCL.

ISAC Reply 1C deleted from MRC CYCL.

ISAC Reply 1D deleted from MRC CYCL.

ISAC Reply 1E deleted from MRC CYCL.

ISAC Reply 1F deleted from MRC CYCL.

MRC ANJW has been deleted

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED61741*)

MATTDMATERIAL

THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.

Enter the applicable reply code from the table below

(MATTDST4140*;MATTDST1018$DST4340*;MATTDST1018$$DST4340*)

Table 1
	Reply Code (MA01)	Reply
	ALB000	ALUMINUM ALLOY
	AL2014	ALUMINUM ALLOY 2014
	ZTD000	ALUMINUM ALLOY 2014, TYPE 4
	ZTE000	ALUMINUM ALLOY 2014, TYPE 6
	AL2024	ALUMINUM ALLOY 2024
	ZTF000	ALUMINUM ALLOY 2024, TYPE 351
	ZTG000	ALUMINUM ALLOY 2024, TYPE 851
	AL6061	ALUMINUM ALLOY 6061
	ZTH000	ALUMINUM ALLOY 6061, TYPE 451
	ZSA003	ALUMINUM ALLOY 6061, TYPE 651
	AL7075	ALUMINUM ALLOY 7075
	BND000	BRONZE
	CUB000	COPPER ALLOY
	FEA000	IRON
	NLB000	NICKEL ALLOY
	STA000	STEEL
	ST1018	STEEL COMP 1018
	ST4140	STEEL COMP 4140
	ST4142	STEEL COMP 4142
	ST4340	STEEL COMP 4340
	STB000	STEEL CORROSION RESISTING
	ZTK000	TITANIUM ALLOY 4965
	ZTL000	TITANIUM ALLOY 4967

ALBYDUSAGE DESIGN

INDICATES THE DESIGNED USE OF THE ITEM.

Enter the applicable reply code from the table below

(ALBYDAHY)

Table 1
	Reply Code (AH21)	Reply
	AHX	AIRCRAFT
	AHY	SHIP
	AMF	VEHICULAR

SFTT*DSURFACE TREATMENT

THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.

Enter the applicable reply code from the table below

(SFTTDAAA000*;SFTTDPRA000$DANA000*;SFTTDPRA000$$DANA000*)

Table 1
	Reply Code (SF01)	Reply
	ANA000	ANODIZE
	CDA000	CADMIUM
	CMB000	CHROMATE ZINC
	AAA000	PAINTED
	PRA000	PRIMER

HUES*DCOLOR

A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.

Enter the applicable reply code from the table below

(HUESDSL0000)

Table 1
	Reply Code (AD06)	Reply
	BL0000	BLACK
	GR0000	GREEN
	SL0000	SILVER
	TA0000	TAN

ABHP*JOVERALL LENGTH

THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABHPJLC2.0*;ABHPJLC2.0$$JLC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CYHY*AVEHICLE IDENTIFICATION DESIGNATOR

THE NAME OR COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH IDENTIFY THE SPECIFIC VEHICLE.

Enter the alpha-numeric reply with a minimum of one character.

(CYHYAE0)

AAJD*ATHREAD CLASS

A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.

Enter the alpha-numeric reply with a minimum of one character.

(AAJDAO3)

CMLP*ATHREAD QUANTITY PER INCH

THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.

Enter the alpha-numeric reply with a minimum of one character.

(CMLPAX1)

AASA*JTHREAD LENGTH

A MEASUREMENT OF THE EXTENT OF THREADS,INCLUDING INCOMPLETE THREADS,ALONG A LINE PARALLEL TO THE LONGITUDINAL AXIS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AASAJLC2.0*;AASAJLC2.0$$JLC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADAV*JOVERALL DIAMETER

A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADAVJLB2.0*;ADAVJLB2.0$$JLB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CQFM*JHARDNESS RATING

A NUMERIC VALUE THAT REFLECTS THE HARDNESS OF AN ITEM WHEN USED IN CONJUNCTION WITH A HARDNESS RATING SCALE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CQFMJAGA2.0*)

Table 1
	Reply Code (AC26)	Reply
	BN	BRINELL
	BS	BRINELL STANDARD
	AG	SHORE
	SA	SHORE DUROMETER A
	SB	SHORE DUROMETER B
	SE	SHORE DUROMETER C
	SD	SHORE DUROMETER D

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

THSD*DTHREAD SERIES DESIGNATOR

A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.

Enter the applicable reply code from the table below

(THSDDNF)

Table 1
	Reply Code (AH06)	Reply
	EM	M
	NP	NPT
	NT	NPTF
	UN	UN
	NE	UNEF
	NF	UNF
	NC	UNIFIED NATIONAL COARSE (UNC)
	NJ	UNIFIED NATIONAL JOINT (UNJ)
	JC	UNJC

CFQK*JWORKING PRESSURE RATING

THE WORKING PRESSURE AT WHICH THE ITEM IS RATED.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CFQKJFBB2.0*)

Table 1
	Reply Code (AG67)	Reply
	AS	POUNDS
	DA	POUNDS PER CUBIC FOOT
	FB	POUNDS PER SQUARE INCH (PSI)

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.

MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION

THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.

Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.

(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)

Table 1
	Reply Code (AP33)	Reply
	Q	AEROSPACE MATERIAL SPEC STD
	J	AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
	G	ASSN STD
	A	COMMERCIAL ITEM DESCRIPTION
	K	DEF STAN/SPEC
	B	FED SPEC
	C	FED STD
	L	GOVERNMENT STD/SPEC
	N	INTERNATIONAL STD/SPEC
	F	MFR REF
	D	MIL SPEC
	E	MIL STD
	H	NATIONAL SPEC
	P	NATIONAL STD
	M	NATIONAL STD/SPEC

Table 2
	Reply Code (AP18)	Reply
	M	10TH MATERIAL RESPONSE
	N	11TH MATERIAL RESPONSE
	P	12TH MATERIAL RESPONSE
	Q	13TH MATERIAL RESPONSE
	R	14TH MATERIAL RESPONSE
	S	15TH MATERIAL RESPONSE
	T	16TH MATERIAL RESPONSE
	U	17TH MATERIAL RESPONSE
	W	18TH MATERIAL RESPONSE
	X	19TH MATERIAL RESPONSE
	B	1ST MATERIAL RESPONSE
	Y	20TH MATERIAL RESPONSE
	Z	21ST MATERIAL RESPONSE
	V	22ND MATERIAL RESPONSE
	C	2ND MATERIAL RESPONSE
	D	3RD MATERIAL RESPONSE
	E	4TH MATERIAL RESPONSE
	F	5TH MATERIAL RESPONSE
	H	6TH MATERIAL RESPONSE
	J	7TH MATERIAL RESPONSE
	K	8TH MATERIAL RESPONSE
	L	9TH MATERIAL RESPONSE
	G	ALL MATERIAL RESPONSES
	A	SINGLE MATERIAL RESPONSE

ADLA*JBURST TEST PRESSURE

THE MINIMUM INTERNAL PRESSURE,AS DETERMINED BY DESTRUCTION TESTS,AT WHICH THE ITEM CAN BE EXPECTED TO RUPTURE.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADLAJP2.0*)

Table 1
	Reply Code (AB18)	Reply
	P	POUNDS
	V	POUNDS PER SQUARE INCH

ZZZV*GFSC APPLICATION DATA

THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.

Enter the name of the next higher classifiable assembly in clear text.

(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)

ABKW*JOVERALL HEIGHT

THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABKWJLA2.0*;ABKWJLA2.0$$JLA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CZNF*ACOLOR CHIP NUMBER

THE IDENTIFYING NUMBER FOR THE COLOR CHIP.

Enter the alpha-numeric reply with a minimum of one character.

(CZNFAK4)

CYCL*JPORT DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE PORT,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CYCL3AGQJAC2.0*;CYCL3AGQJAC2.0$JAC2.0*;CYCL3AGQJAC2.0$$JAC2.1*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AEE	OVERALL
	3AGQ	SINGLE PORT
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 3
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

HEAT*DHEAT TREATMENT

A COMBINATION OF TIMED HEATING AND COOLING OPERATIONS APPLIED FOR THE PURPOSE OF ANNEALING OR HARDENING THE ITEM.

Enter the applicable reply code from the table below

(HEATDJT)

Table 1
	Reply Code (AD05)	Reply
	BP	ANNEALED
	CX	COLD ROLLED
	GB	H-116 SPECIALLY TREATED
	TP	H-24 STRAIN HARDENED, PARTIALLY ANNEALED TO 1/2 HARD
	TQ	H-32 STRAIN HARDENED, STABILIZED TO 1/4 HARD
	QP	H-321 STRAIN HARDENED
	TR	H-34 STRAIN HARDENED, STABILIZED TO 1/2 HARD
	TS	H-36 STRAIN HARDENED, STABILIZED TO 3/4 HARD
	TT	H-38 STRAIN HARDENED, STABILIZED TO FULL HARD
	CH	HARD
	CY	HARDENED
	CT	HOT ROLLED
	JR	OILED
	JQ	PICKLED
	EN	QUENCHED
	JT	ROLLED
	EP	TEMPERED

TEXT*GGENERAL CHARACTERISTICS ITEM DESCRIPTION

A RECORDING OF THE PHYSICAL,FUNCTIONAL,AND PERFORMANCE CHARACTERISTICS FOR AN ITEM OF SUPPLY.

Enter clear text.

(TEXTGCLEARTEXT)

Reply to this MRC in accordance with Volume 3.

AGAV*GEND ITEM IDENTIFICATION

THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.

Enter the reply in clear text.

(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION

THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.

(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)

Table 1
	Reply Code (AP33)	Reply
	G	ASSN STD
	A	COMMERCIAL ITEM DESCRIPTION
	K	DEF STAN/SPEC
	B	FED SPEC
	C	FED STD
	L	GOVERNMENT STD/SPEC
	N	INTERNATIONAL STD/SPEC
	F	MFR REF
	D	MIL SPEC
	E	MIL STD
	H	NATIONAL SPEC
	P	NATIONAL STD
	M	NATIONAL STD/SPEC

Table 2
	Reply Code (AP39)	Reply
	M	10TH TREATMENT RESPONSE
	N	11TH TREATMENT RESPONSE
	P	12TH TREATMENT RESPONSE
	Q	13TH TREATMENT RESPONSE
	R	14TH TREATMENT RESPONSE
	S	15TH TREATMENT RESPONSE
	B	1ST TREATMENT RESPONSE
	C	2ND TREATMENT RESPONSE
	D	3RD TREATMENT RESPONSE
	E	4TH TREATMENT RESPONSE
	F	5TH TREATMENT RESPONSE
	H	6TH TREATMENT RESPONSE
	J	7TH TREATMENT RESPONSE
	K	8TH TREATMENT RESPONSE
	L	9TH TREATMENT RESPONSE
	G	ALL TREATMENT RESPONSES
	A	SINGLE TREATMENT RESPONSE