A group of items consisting of mating terminals, or terminals with a joining device, designed to expedite or simplify the connection of two or more electrical wires without bringing them to a fixed point such as a binding post or terminal. It allows for simple, rapid separation of the spliced wires without the use of tools. May include an insulation sleeve. See also SPLICE, CONDUCTOR.
ISAC Reply 3AEE added to MRC CZMG.
ISAC Reply 3AEX added to MRC CZMG.
ISAC Reply 3HOU added to MRC CZMG.
ISAC Reply 1A deleted from MRC CZMG.
ISAC Reply 1B deleted from MRC CZMG.
ISAC Reply 1C deleted from MRC CZMG.
ISAC Reply 1D deleted from MRC CZMG.
ISAC Reply 1X deleted from MRC CZMG.
ISAC Reply 1Z deleted from MRC CZMG.
ISAC Reply 3AEE added to MRC CSFJ.
ISAC Reply 3AET added to MRC CSFJ.
ISAC Reply 3AEX added to MRC CSFJ.
ISAC Reply 3AIF added to MRC CSFJ.
ISAC Reply 3HOU added to MRC CSFJ.
ISAC Reply 1A deleted from MRC CSFJ.
ISAC Reply 1B deleted from MRC CSFJ.
ISAC Reply 1C deleted from MRC CSFJ.
ISAC Reply 1D deleted from MRC CSFJ.
ISAC Reply 1X deleted from MRC CSFJ.
ISAC Reply 1Z deleted from MRC CSFJ.
ISAC Reply 3AEE added to MRC AALA.
ISAC Reply 3AEX added to MRC AALA.
ISAC Reply 3HOU added to MRC AALA.
ISAC Reply 1A deleted from MRC AALA.
ISAC Reply 1B deleted from MRC AALA.
ISAC Reply 1C deleted from MRC AALA.
ISAC Reply 1D deleted from MRC AALA.
ISAC Reply 1X deleted from MRC AALA.
ISAC Reply 1Z deleted from MRC AALA.
ISAC Reply 1A deleted from MRC AALB.
ISAC Reply 1B deleted from MRC AALB.
ISAC Reply 1C deleted from MRC AALB.
ISAC Reply 1D deleted from MRC AALB.
ISAC Reply 1X deleted from MRC AALB.
ISAC Reply 1Z deleted from MRC AALB.
ISAC Reply 3AEE added to MRC AALL.
ISAC Reply 3AEX added to MRC AALL.
ISAC Reply 3HOU added to MRC AALL.
ISAC Reply 1A deleted from MRC AALL.
ISAC Reply 1B deleted from MRC AALL.
ISAC Reply 1C deleted from MRC AALL.
ISAC Reply 1D deleted from MRC AALL.
ISAC Reply 1X deleted from MRC AALL.
ISAC Reply 1Z deleted from MRC AALL.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AHX added to MRC MATT.
ISAC Reply 3AHY added to MRC MATT.
ISAC Reply 3AIA added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3AHL added to MRC SFTT.
ISAC Reply 3AHR added to MRC SFTT.
ISAC Reply 3AHU added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1C deleted from MRC SFTT.
ISAC Reply 1D deleted from MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
MRC AADH has been deleted
MRC AADJ has been deleted
MRC AALC has been deleted
MRC AALD has been deleted
MRC AALJ has been deleted
MRC CSZR has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED61105*)
IF STYLE/REPLY CODE(s) A42, A43 OR A44 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (AAJU)
AGTALBASIC SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE BASIC APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AGTALA44)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAR1034 | A42 | TWO PIECE IDENTICAL |
| AAR1035 | A43 | TWO PIECE NONIDENTICAL |
| AAR1036 | A44 | THREE PIECE |
AAJU*JOVERALL LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAJUJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) AAB, AAD, AAF, AAP, ADJ, ADK, ADL, ADM, ADN, ADQ, ADR, ADS, ADT OR AEK WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) AAQ, AAR, AAS OR AAT WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) AAW OR AAX WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ABA WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ACC OR ACD WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) ABB WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ABC WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALL and AALA)
IF STYLE/REPLY CODE(s) ABD WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ABE WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALL and AALA)
IF STYLE/REPLY CODE(s) ABF WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) ABG WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ABH, ABJ OR ABK WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ABL WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALB and AALL)
IF STYLE/REPLY CODE(s) ABM WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALL and AALA)
IF STYLE/REPLY CODE(s) ABN WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ABP WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ADW WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) ADY WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ADZ WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) AEA WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) ACJ, ACK, AEB, AEC OR AED WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) AEE, AEF OR AEG WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ACL WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) ACS WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ACY WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALL and AALB)
IF STYLE/REPLY CODE(s) ADA OR ADE WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALL)
IF STYLE/REPLY CODE(s) ADF WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) ADG WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALA and AALL)
IF STYLE/REPLY CODE(s) AEH WERE ENTERED FOR MRC CZMG, YOU MUST ANSWER MRC (AALA)
CZMGLCONDUCTOR ACCOMMODATION TYPE STYLE
THE STYLE DESIGNATION INDICATING THE TYPE OF CONNECTOR OR CONDUCTOR ACCOMMODATION INCLUDED ON THE ITEM.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(CZMG3AEXLAEK*;CZMG3AEXLAEK$LABE*;CZMG3AEXLAEK$$LABE*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAR1050 | AAB | FLAT LUG |
| AAR1051 | AAC | STRAIGHT SPLIT BARREL |
| AAR1052 | AAD | CLAMPING CHANNEL EARS |
| AAR1053 | AAE | CLAMPONG TANG EARS |
| AAR1054 | AAF | CLAMPING BARREL EARS |
| AAR1055 | AAH | SPLIT RECESSED BARREL |
| AAR1056 | AAJ | RECESSED BARREL |
| AAR1057 | AAK | STRAIGHT BARREL |
| AAR1058 | AAL | BARREL W/EAR |
| AAR1059 | AAM | CLAMPING POINTED EARS |
| AAR1060 | AAN | BARREL W/NOTCH |
| AAR1061 | AAP | CLAMP-SOLDER |
| AAR1062 | AAQ | SINGLE TURRET |
| AAR1063 | AAR | DOUBLE TURRET |
| AAR1064 | AAS | TRIPLE TURRET |
| AAR1065 | AAT | FOUR TURRET |
| AAR1066 | AAW | TURRET W/NOTCH |
| AAR1067 | AAX | TURRET |
| AAR1068 | ABA | SLOTTED TRIPLE TURRET |
| AAR1069 | ABB | PIN W/SLOT |
| AAR1070 | ABC | PIN W/HOLE |
| AAR1071 | ABD | PIN |
| AAR1072 | ABE | SOLDER POT |
| AAR1073 | ABF | SQUARE PIN |
| AAR1074 | ABG | STRAIGHT WIRE |
| AAR1075 | ABH | SHOULDERED PIN |
| AAR1076 | ABJ | SHOULDERED PIN W/HOLE |
| AAR1077 | ABK | STRAIGHT WIRE W/RING |
| AAR1078 | ABL | WIRE HOOK |
| AAR1079 | ABM | TURRET W/SOLDER POT |
| AAR1080 | ABN | NAILHEAD |
| AAR1081 | ABP | BENT NAILHEAD |
| AAR1082 | ABQ | SPLIT BOLT W/SPACER |
| AAR1083 | ABR | SPLIT BOLT W/0 SPACER |
| AAR1084 | ABS | SINGLE U-BOLT W/SPACER |
| DR04203 | ABT | SINGLE U-BOLT W/O SPACER |
| AAR1085 | ABW | DOUBLE U-BOLT W/SPACER |
| DR04204 | ABX | DOUBLE U-BOLT W/O SPACER |
| AAR1086 | ABY | TRIPLE U-BOLT W/SPACER |
| DR04205 | ABZ | TRIPLE U-BOLT W/O SPACER |
| AAR1087 | ACA | FOUR U-BOLT W/SPACER |
| DR04308 | ACB | FOUR U-BOLT W/O SPACER |
| AAR1088 | ACC | BIFURCATED "U" FORK |
| AAR1089 | ACD | BIFURCATED "Y" FORK |
| AAR1090 | ACE | CLAMP W/SPACER |
| DR04309 | ACF | CLAMP W/O SPACER |
| AAR1091 | ACG | CROSS CLAMP W/SPACER |
| DR04310 | ACH | CROSS CLAMP W/O SPACER |
| AAR1092 | ACJ | SINGLE SET SCREW COMPRESSION CLAMP |
| AAR1093 | ACK | SINGLE SETSCREW |
| AAR1094 | ACL | DOUBLE SETSCREW |
| AAR1095 | ACM | COMPRESSION CHUCK |
| AAR1096 | ACN | THREADED EXTERNAL |
| AAR1097 | ACP | THREADED EXTERNAL W/SLOT |
| AAR1098 | ACQ | THREADED EXTERNAL W/NOTCH |
| AAR1099 | ACR | SCREW |
| AAR1100 | ACS | THREADED INTERNAL |
| AAR1101 | ACT | SCREW CAP W/SPIRAL THREAD |
| AAR1102 | ACW | SPIRAL SPRING |
| AAR1103 | ACX | SPRING COUPLING |
| AAR1104 | ACY | FLAT WIRE W/HOLE |
| AAR1105 | ACZ | SCREW CAP |
| AAR1106 | ADA | SCREW CAP W/HOLE |
| AAR1107 | ADB | SCREW CAP W/SLOT |
| AAR1108 | ADC | SCREW CAP W/JAW |
| AAR1109 | ADD | SPRING CAP W/JACK |
| AAR1110 | ADE | SPRING CAP W/HOLE |
| AAR1111 | ADF | FLAT LUG W/TANG |
| AAR1112 | ADG | CONE SOLDER POT |
| AAR1113 | ADJ | SLANT LUG W/ONE HOLE |
| AAR1114 | ADK | SLANT LUG W/TWO HOLES |
| AAR1115 | ADL | FLAT LUG W/TWO EARS |
| AAR1116 | ADM | FLAT LUG W/REVERSE END LINE EAR |
| AAR1117 | ADN | FLAT LUG W/END LINE EAR |
| AAR1118 | ADQ | FLAT LUG SLOTTED W/ONE HOLE |
| AAR1119 | ADR | FLAT LUG W/DOUBLE NOTCH ON ONE SIDE |
| AAR1120 | ADS | FLAT LUG W/SINGLE NOTCH ON EACH SIDE |
| AAR1121 | ADT | FLAT LUG W/ANGULAR NOTCH |
| AAR1122 | ADW | BLOCK CLAMP |
| AAR1123 | ADX | TAPERED CLAMP |
| AAR1124 | ADY | ROUND CLAMP |
| AAR1125 | ADZ | PARALLEL BOLT CLAMP |
| AAR1126 | AEA | SINGLE COMPRESSION CLAMP |
| AAR1127 | AEB | PARALLEL CRIMP CLAMP |
| AAR1128 | AEC | DOUBLE COMPRESSION CLAMP |
| AAR1129 | AED | SQUEEZE SETSCREW |
| AAR1130 | AEE | SETSCREW W/OFFSET BITE |
| AAR1131 | AEF | BARREL SETSCREW W/HOLE |
| AAR1132 | AEG | BARREL SETSCREW W/SLOT |
| AAR1133 | AEH | SLOTTED SINGLE TURRET |
| AAR1134 | AEK | FLAT LUG SLOTTED W/SINGLE NOTCH ON EACH SIDE |
IF STYLE/REPLY CODE(s) AAB, AAD, AAF, AAP, ADJ, ADK, ADL, ADM, ADN, ADQ, ADR, ADS, ADT OR AEK WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) AAQ, AAR, AAS OR AAT WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) AAW OR AAX WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ABA WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ACC OR ACD WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) ABB WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ABC WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALL and AALA)
IF STYLE/REPLY CODE(s) ABD WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ABE WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALL and AALA)
IF STYLE/REPLY CODE(s) ABF WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) ABG WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ABH, ABJ OR ABK WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ABL WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALB and AALL)
IF STYLE/REPLY CODE(s) ABM WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALL and AALA)
IF STYLE/REPLY CODE(s) ABN WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ABP WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ADW WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) ADY WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ADZ WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) AEA WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) ACJ, ACK, AEB, AEC OR AED WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) AEE, AEF OR AEG WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ACL WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) ACS WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALA)
IF STYLE/REPLY CODE(s) ACY WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALL and AALB)
IF STYLE/REPLY CODE(s) ADA OR ADE WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALL)
IF STYLE/REPLY CODE(s) ADF WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALB)
IF STYLE/REPLY CODE(s) ADG WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALA and AALL)
IF STYLE/REPLY CODE(s) AEH WERE ENTERED FOR MRC CSFJ, YOU MUST ANSWER MRC (AALA)
CSFJ*DCONDUCTOR ACCOMMODATION TYPE
INDICATES THE TYPE OF CONNECTOR OR CONDUCTOR ACCOMMODATION INCLUDED ON THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CSFJ3AIFDAAJ*;CSFJ3AIFDAAJ$DABH*;CSFJ3AIFDAAJ$$DABH*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEX | ALL ENDS |
| 3AIF | SINGLE END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP10) | Reply |
| AEF | BARREL SETSCREW W/HOLE |
| AEG | BARREL SETSCREW W/SLOT |
| AAL | BARREL W/EAR |
| AAN | BARREL W/NOTCH |
| ABP | BENT NAILHEAD |
| ACC | BIFURCATED U-FORK |
| ACD | BIFURCATED Y-FORK |
| ADW | BLOCK CLAMP |
| ACF | CLAMP W/O SPACER |
| ACE | CLAMP W/SPACER |
| AAF | CLAMPING BARREL EARS |
| AAD | CLAMPING CHANNEL EARS |
| AAM | CLAMPING POINTED EARS |
| AAE | CLAMPING TANG EARS |
| AAP | CLAMP-SOLDER |
| ACM | COMPRESSION CHUCK |
| ADG | CONE SOLDER POT |
| ACH | CROSS CLAMP W/O SPACER |
| ACG | CROSS CLAMP W/SPACER |
| AEC | DOUBLE COMPRESSION CLAMP |
| ACL | DOUBLE SETSCREW |
| AAR | DOUBLE TURRET |
| ABX | DOUBLE U-BOLT W/O SPACER |
| ABW | DOUBLE U-BOLT W/SPACER |
| AAB | FLAT LUG |
| ADQ | FLAT LUG SLOTTED W/ONE HOLE |
| AEK | FLAT LUG SLOTTED W/SINGLE NOTCH ON EACH SIDE |
| ADT | FLAT LUG W/ANGULAR NOTCH |
| ADR | FLAT LUG W/DOUBLE NOTCH ON ONE SIDE |
| ADN | FLAT LUG W/END LINE EAR |
| ADM | FLAT LUG W/REVERSE END LINE EAR |
| ADS | FLAT LUG W/SINGLE NOTCH ON EACH SIDE |
| ADF | FLAT LUG W/TANG |
| ADL | FLAT LUG W/TWO EARS |
| ACY | FLAT WIRE W/HOLE |
| AAT | FOUR TURRET |
| ACB | FOUR U-BOLT W/O SPACER |
| ACA | FOUR U-BOLT W/SPACER |
| ABN | NAILHEAD |
| ADZ | PARALLEL BOLT CLAMP |
| AEB | PARALLEL CRIMP CLAMP |
| ABD | PIN |
| ABC | PIN W/HOLE |
| ABB | PIN W/SLOT |
| AAJ | RECESSED BARREL |
| ADY | ROUND CLAMP |
| ACR | SCREW |
| ACZ | SCREW CAP |
| ADA | SCREW CAP W/HOLE |
| ADC | SCREW CAP W/JAW |
| ADB | SCREW CAP W/SLOT |
| ACT | SCREW CAP W/SPIRAL THREAD |
| AEE | SETSCREW W/OFFSET BITE |
| ABH | SHOULDERED PIN |
| ABJ | SHOULDERED PIN W/HOLE |
| AEA | SINGLE COMPRESSION CLAMP |
| ACK | SINGLE SETSCREW |
| ACJ | SINGLE SETSCREW COMPRESSION CLAMP |
| AAQ | SINGLE TURRET |
| ABT | SINGLE U-BOLT W/O SPACER |
| ABS | SINGLE U-BOLT W/SPACER |
| ADJ | SLANT LUG W/ONE HOLE |
| ADK | SLANT LUG W/TWO HOLES |
| AEH | SLOTTED SINGLE TURRET |
| ABA | SLOTTED TRIPLE TURRET |
| ABE | SOLDER POT |
| ACW | SPIRAL SPRING |
| ABR | SPLIT BOLT W/O SPACER |
| ABQ | SPLIT BOLT W/SPACER |
| AAH | SPLIT RECESSED BARREL |
| ADE | SPRING CAP W/HOLE |
| ADD | SPRING CAP W/JAW |
| ACX | SPRING COUPLING |
| ABF | SQUARE PIN |
| AED | SQUEEZE SETSCREW |
| AAK | STRAIGHT BARREL |
| AAC | STRAIGHT SPLIT BARREL |
| ABG | STRAIGHT WIRE |
| ABK | STRAIGHT WIRE W/RING |
| ADX | TAPERED CLAMP |
| ACN | THREADED EXTERNAL |
| ACQ | THREADED EXTERNAL W/NOTCH |
| ACP | THREADED EXTERNAL W/SLOT |
| ACS | THREADED INTERNAL |
| AAS | TRIPLE TURRET |
| ABZ | TRIPLE U-BOLT W/O SPACER |
| ABY | TRIPLE U-BOLT W/SPACER |
| AAX | TURRET |
| AAW | TURRET W/NOTCH |
| ABM | TURRET W/SOLDER POT |
| ABL | WIRE HOOK |
Reference NotesRefer to Reference Drawings for assitance in answering this MRC.
AALA*JLARGEST DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE LARGEST CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AALA3AEEJA2.0*;AALA3AEEJA2.0$JA2.0*;AALA3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AALB*JLARGEST WIDTH
THE LARGEST MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AALBJA2.0*;AALBJA2.0$JA2.0*;AALBJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AALL*JWIRE HOLE DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AALL3AEXJA2.0*;AALL3AEXJA2.0$JA2.0*;AALL3AEXJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAKV*JMAXIMUM CONDUCTOR SIZE ACCOMMODATED
THE MAXIMUM SIZE OF THE CONDUCTOR THE ITEM IS DESIGNED TO ACCOMMODATE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(AAKVJA2*)
| Table 1 |
| Reply Code (AA44) | Reply |
| A | AWG |
| M | MCM |
IF STYLE/REPLY CODE(s) G10, G11 OR G12 WERE ENTERED FOR MRC AAKG, YOU MUST ANSWER MRC (AAKH)
IF STYLE/REPLY CODE(s) G14 OR G15 WERE ENTERED FOR MRC AAKG, YOU MUST ANSWER MRC (AAKK and AAKP)
IF STYLE/REPLY CODE(s) G16 OR G17 WERE ENTERED FOR MRC AAKG, YOU MUST ANSWER MRC (AAKM)
IF STYLE/REPLY CODE(s) G19 OR G20 WERE ENTERED FOR MRC AAKG, YOU MUST ANSWER MRC (AAKJ)
IF STYLE/REPLY CODE(s) G22 WERE ENTERED FOR MRC AAKG, YOU MUST ANSWER MRC (AAKL)
IF STYLE/REPLY CODE(s) G24 WERE ENTERED FOR MRC AAKG, YOU MUST ANSWER MRC (AAKL)
IF STYLE/REPLY CODE(s) G25 WERE ENTERED FOR MRC AAKG, YOU MUST ANSWER MRC (AAKH)
IF STYLE/REPLY CODE(s) G28 WERE ENTERED FOR MRC AAKG, YOU MUST ANSWER MRC (AAKH and AAKJ)
IF STYLE/REPLY CODE(s) G29 WERE ENTERED FOR MRC AAKG, YOU MUST ANSWER MRC (AAKH and AAKK)
IF STYLE/REPLY CODE(s) G30 WERE ENTERED FOR MRC AAKG, YOU MUST ANSWER MRC (AAKL and AAKJ)
AAKGLQUICK DISCONNECT STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE QUICK DISCONNECT.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAKGLG17)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAR1166 | G10 | TAB W/HOLE |
| AAR1167 | G11 | TAB |
| AAR1168 | G12 | TAB W/SQUARE HOLE |
| AAR1169 | G14 | TAPER PLUG |
| AAR1170 | G15 | PIN |
| AAR1171 | G16 | SEMI BALL |
| AAR1172 | G17 | BALL |
| AAR1173 | G19 | TAB RECEPTACLE MODIFIED |
| AAR1174 | G20 | TAB RECEPTACLE |
| AAR1175 | G22 | PLUG RECEPTACLE |
| AAR1176 | G23 | BALL RECEPTACLE |
| AAR1177 | G24 | PLUG COUPLER |
| AAR1178 | G25 | TAB COUPLER |
| AAR1179 | G26 | INTERLOCKING KNIFE |
| AAR1180 | G27 | INTERLOCKING SLIDE |
| AAR1181 | G28 | DOUBLE TAB |
| AAR1182 | G29 | TAB PLUG |
| AAR1183 | G30 | TAB PLUG RECEPTACLE |
AAKH*JTAB WIDTH
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAKHJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAKJ*JWIDTH OF TAB ACCOMMODATED
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAKJJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAKK*JMAJOR PLUG DIAMETER
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAKKJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAKL*JMAJOR PLUG DIAMETER ACCOMMODATED
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAKLJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAKM*JBALL DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A BALL,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAKMJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAKP*JMINOR PLUG DIAMETER
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAKPJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) AAB, AAC, AAD, AAF, AAG, AAH, AAK OR AAL WERE ENTERED FOR MRC AALV, YOU MUST ANSWER MRC (AAPC)
AALVDELECTRICAL INSULATION FEATURE
THE FEATURE CONSISTING OF SLEEVES,COVERING,CAPS,MOUNTING BUSHINGS AND THE LIKE,USED TO ELECTRICALLY INSULATE AN ITEM.
Enter the applicable reply code from the table below
(AALVDAAJ)
| Table 1 |
| Reply Code (AA47) | Reply |
| AAB | HEAT SHRINKABLE SLEEVE |
| AAR | HERMETIC SEAL |
| AAH | INSULATED CAPS WITH INSULATED STUDS |
| AAK | INSULATED CAPS WITH ONE INSULATED AND ONE UNINSULATED STUD |
| AAL | INSULATED CAPS WITH TWO INSULATED AND ONE UNINSULATED STUD |
| AAG | INSULATED CAPS WITH UNINSULATED STUDS |
| AAD | INSULATING MOUNTING BUSHING |
| AAC | INSULATING SLEEVE |
| AAF | STANDOFF INSULATION |
| AAE | UNINSULATED |
| AAJ | UNINSULATED CAPS WITH UNINSULATED STUDS |
AAPC*DIDENTIFICATION CODE COLOR
THE APPLICATION OF COLOR OR A SERIES OF COLORS FOR THE EXPRESSED PURPOSE OF IDENTIFYING THE SPECIFIC FUNCTIONAL DESIGN AND/OR THE SYSTEM APPLICATION OF AN ITEM.
Enter the applicable reply code from the table below
(AAPCDGL0000*;AAPCDGR0000$DWH0000*;AAPCDGR0000$$DWH0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| BL0000 | BLACK |
| BL0001 | BLACK, FED STD 595, 17038 |
| BL0033 | BLACK, FED STD 595, 37038 |
| BU0000 | BLUE |
| BR0000 | BROWN |
| BR0003 | BROWN, LIGHT |
| GL0000 | GOLD |
| GY0006 | GRAY, BLUE |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| VY0000 | IVORY |
| LD0000 | OLIVE DRAB |
| LD0017 | OLIVE DRAB, FED STD 595, 24087 |
| RG0000 | ORANGE |
| PK0000 | PINK |
| PU0000 | PURPLE |
| RE0000 | RED |
| RE0001 | RED, FED STD 595, 11136 |
| RE0072 | RED, TOMATO |
| SL0000 | SILVER |
| TA0000 | TAN |
| VL0000 | VIOLET |
| WH0000 | WHITE |
| YE0000 | YELLOW |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AIADPBB000*;MATT3AIADPBB000$DCU0074*;MATT3AIADPBB000$$DCU0074*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AHX | CONDUCTOR ACCOMMODATION |
| 3AHY | INSULATION |
| 3AIA | OVERALL EXCEPT INSULATION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALD000 | ALUMINA |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL2011 | ALUMINUM ALLOY 2011 |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL0356 | ALUMINUM ALLOY 356 |
| AL0029 | ALUMINUM ALLOY 360.0 |
| AL5052 | ALUMINUM ALLOY 5052 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL6063 | ALUMINUM ALLOY 6063 |
| AL0196 | ALUMINUM ALLOY A-G5 |
| SBA000 | ANTIMONY |
| ASA000 | ASBESTOS |
| BEA000 | BERYLLIUM |
| BEC000 | BERYLLIUM OXIDE |
| CNB000 | CARBON GRAPHITE |
| CSB000 | CELLULOSE ACETATE |
| CLD000 | CERAMIC |
| CRA000 | CHROMIUM |
| CLE000 | CLAY ALUMINA |
| CTA000 | COBALT |
| MTD000 | CONSTANTAN |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0060 | COPPER ALLOY 11 |
| CU0063 | COPPER ALLOY 110 |
| CU0068 | COPPER ALLOY 170 |
| CU0069 | COPPER ALLOY 172 |
| CU0233 | COPPER ALLOY 173 |
| CU0074 | COPPER ALLOY 230 |
| CU0076 | COPPER ALLOY 240 |
| CU0077 | COPPER ALLOY 25 |
| CU0079 | COPPER ALLOY 260 |
| CU0080 | COPPER ALLOY 268 |
| CU0081 | COPPER ALLOY 270 |
| CU0314 | COPPER ALLOY 314 |
| CU0088 | COPPER ALLOY 342 |
| CU0089 | COPPER ALLOY 353 |
| CU0091 | COPPER ALLOY 360 |
| CU0092 | COPPER ALLOY 377 |
| CU0099 | COPPER ALLOY 464 |
| CU0101 | COPPER ALLOY 485 |
| CU0103 | COPPER ALLOY 510 |
| CU0104 | COPPER ALLOY 511 |
| CU0106 | COPPER ALLOY 524 |
| CU0107 | COPPER ALLOY 532-CANCELED |
| CU0109 | COPPER ALLOY 544 |
| CU0136 | COPPER ALLOY 692-CANCELED |
| CU0151 | COPPER ALLOY 762 |
| CU0157 | COPPER ALLOY 770 |
| CU0177 | COPPER ALLOY 852 |
| CU0178 | COPPER ALLOY 854 |
| CU0001 | COPPER ALLOY A |
| CU0004 | COPPER ALLOY A3 |
| CU0010 | COPPER ALLOY B |
| CU0237 | COPPER ALLOY CA210 |
| CU0022 | COPPER ALLOY CA260 |
| CU0027 | COPPER ALLOY CA360 |
| CUF000 | COPPER CAST |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| FEA000 | IRON |
| FEF000 | IRON ALLOY |
| FE0001 | IRON ALLOY 52 |
| PBA000 | LEAD |
| PBB000 | LEAD ALLOY |
| MNA000 | MANGANESE |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| NL0015 | NICKEL ALLOY 1 |
| NL0016 | NICKEL ALLOY 2 |
| NL0008 | NICKEL ALLOY 400 |
| NL0019 | NICKEL ALLOY 502 |
| NL0018 | NICKEL ALLOY K-500 |
| NL0017 | NICKEL ALLOY R-405 |
| NLC000 | NICKEL SILVER |
| PDA000 | PALLADIUM |
| PPG000 | PAPER PHENOLIC |
| PCA000 | PLASTIC |
| PCB000 | PLASTIC ACETAL |
| PCD000 | PLASTIC ACRYLIC |
| PCAX00 | PLASTIC ACRYLONITRILE |
| PCBL00 | PLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) |
| PCE000 | PLASTIC ALKYD |
| PCBN00 | PLASTIC CELLULOSE ACETATE BUTYRATE |
| PCBJ00 | PLASTIC CELLULOSE NITRATE |
| PCG000 | PLASTIC DIALLYL PHTHALATE |
| PCH000 | PLASTIC EPOXY |
| PCJ000 | PLASTIC MELAMINE |
| PCBB00 | PLASTIC METHACRYLATE |
| PCK000 | PLASTIC METHYL METHACRYLATE |
| PCM000 | PLASTIC PHENOL FORMALDEHYDE (PMO) |
| PCN000 | PLASTIC PHENOLIC |
| PCBK00 | PLASTIC PHENOXY |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCR000 | PLASTIC POLYCARBONATE |
| PCT000 | PLASTIC POLYCHLOROTRIFLUOROETHYLENE |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCBH00 | PLASTIC POLYFLUOROETHYLENE-PROPYLENE |
| PCAD00 | PLASTIC POLYSTYRENE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCBM00 | PLASTIC POLYVINYL ACETATE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCBT00 | PLASTIC POLYVINYL FLUORIDE |
| PCBW00 | PLASTIC POLYVINYLIDENE |
| PCBG00 | PLASTIC POLYVINYLIDENE CHLORIDE |
| PCAS00 | PLASTIC POLYVINYLIDENE FLUORIDE |
| PCBC00 | PLASTIC STYRENE |
| PCAP00 | PLASTIC VINYL |
| PTA000 | PLATINUM |
| WDB000 | PLYWOOD |
| CLB000 | PORCELAIN |
| RSC000 | RESIN NATURAL |
| RSA000 | RESIN SYNTHETIC |
| RCA000 | RUBBER NATURAL |
| RCB000 | RUBBER SYNTHETIC |
| SLC000 | SILICON |
| AGA000 | SILVER |
| SLF000 | STEATITE |
| STA000 | STEEL |
| ST1008 | STEEL COMP 1008 |
| ST1009 | STEEL COMP 1009 |
| ST1010 | STEEL COMP 1010 |
| ST1011 | STEEL COMP 1011 |
| ST1012 | STEEL COMP 1012 |
| ST1013 | STEEL COMP 1013 |
| ST1015 | STEEL COMP 1015 |
| ST1016 | STEEL COMP 1016 |
| ST1017 | STEEL COMP 1017 |
| ST1018 | STEEL COMP 1018 |
| ST1019 | STEEL COMP 1019 |
| ST1020 | STEEL COMP 1020 |
| ST1021 | STEEL COMP 1021 |
| ST1022 | STEEL COMP 1022 |
| ST1023 | STEEL COMP 1023 |
| ST1024 | STEEL COMP 1024 |
| ST1025 | STEEL COMP 1025 |
| ST1026 | STEEL COMP 1026 |
| ST1027 | STEEL COMP 1027 |
| ST1029 | STEEL COMP 1029 |
| ST1030 | STEEL COMP 1030 |
| ST1031 | STEEL COMP 1031 |
| ST1033 | STEEL COMP 1033 |
| ST1034 | STEEL COMP 1034 |
| ST1035 | STEEL COMP 1035 |
| ST1112 | STEEL COMP 1112 |
| ST1113 | STEEL COMP 1113 |
| ST1117 | STEEL COMP 1117 |
| ST1137 | STEEL COMP 1137 |
| ST1213 | STEEL COMP 1213 |
| ST1315 | STEEL COMP 1315 |
| ST0301 | STEEL COMP 301 |
| ST0302 | STEEL COMP 302 |
| ST0303 | STEEL COMP 303 |
| ST0078 | STEEL COMP 303S |
| ST0079 | STEEL COMP 303SE |
| ST4130 | STEEL COMP 4130 |
| ST0416 | STEEL COMP 416 |
| ST0430 | STEEL COMP 430 |
| ST0446 | STEEL COMP 446 |
| ST8630 | STEEL COMP 8630 |
| STB000 | STEEL CORROSION RESISTING |
| TLA000 | TELLURIUM |
| SNB000 | TIN |
| TTB000 | TITANIUM |
| ZNB000 | ZINC |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AEEDENA000*;SFTT3AEEDENA000$DLQA000*;SFTT3AEEDENA000$$DLQA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AHL | CONDUCTOR ACCOMMODATION SINGLE LAYER |
| 3AHR | OVERALL SINGLE LAYER |
| 3AHU | OVERALL EXCEPT INSULATION SINGLE LAYER |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| MTA000 | AMALGAM |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CLB000 | CERAMIC |
| CMA000 | CHROMATE |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| ENA000 | ENAMEL |
| AUA000 | GOLD |
| LQA000 | LACQUER |
| PBA000 | LEAD |
| PBB000 | LEAD ALLOY |
| NLA000 | NICKEL |
| NLB000 | NICKEL SILVER |
| XXB000 | OXIDE |
| XXF000 | OXIDE ALUMINUM |
| XXA000 | OXIDE FILM |
| PNA000 | PAINT |
| PDA000 | PALLADIUM |
| PSA000 | PASSIVATE |
| PCA000 | PLASTIC |
| CLC000 | PORCELAIN |
| RSA000 | RESIN SILICONE |
| RHA000 | RHODIUM |
| SLA000 | SILICON |
| AGA000 | SILVER |
| SRA000 | SOLDER |
| SNA000 | TIN |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
AAPA*BDRY FLASHOVER VOLTAGE RATING IN VOLTS
THE ELECTRICAL POTENTIAL WHICH WILL CAUSE A DISRUPTIVE DISCHARGE OVER A DRY INSULATOR,EXPRESSED IN VOLTS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AAPAB2.0)
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDRHA000*;PRMTDPTA000$DIRA000*;PRMTDPTA000$$DIRA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJAUA000F2.0*;PMWTJAUA000F2.0$JAUA000F2.0*;PMWTJAUA000F2.0$$JAUA000F2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAUA0002.0*;PMLCJAUA0002.0$JAUA0002.0*;PMLCJAUA0002.0$$JAUA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CRJP*ACRIMPING TOOL IDENTIFYING NUMBER
AN IDENTIFYING NUMBER ASSIGNED BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE CRIMPING TOOL.
Enter the alpha-numeric reply with a minimum of one character.
(CRJPAA1)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ008*;HZRDDHAZ042$$DHAZ029*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ042 | ASBESTOS |
| HAZ008 | CADMIUM |
| HAZ011 | CHROMIUM |
| HAZ027 | IRIDIUM |
| HAZ029 | LEAD |
| HAZ052 | ZINC |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)