An item made of material having elastic properties.It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like.It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for a weapon system component to be isolated. Excludes:MOUNT, RESILIENT, UTILITY; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dash-pots, grommets, and shock pads.
ISAC Reply 3ABE added to MRC MATT.
ISAC Reply 3ACC added to MRC MATT.
ISAC Reply 3ACD added to MRC MATT.
ISAC Reply 3ACH added to MRC MATT.
ISAC Reply 3ACI added to MRC MATT.
ISAC Reply 3ACJ added to MRC MATT.
ISAC Reply 3ACK added to MRC MATT.
ISAC Reply 3ACL added to MRC MATT.
ISAC Reply 3ACM added to MRC MATT.
ISAC Reply 3ACN added to MRC MATT.
ISAC Reply 3ACO added to MRC MATT.
ISAC Reply 3ACP added to MRC MATT.
ISAC Reply 3ACQ added to MRC MATT.
ISAC Reply 3ACR added to MRC MATT.
ISAC Reply 3ACT added to MRC MATT.
ISAC Reply 3ACU added to MRC MATT.
ISAC Reply 3ACV added to MRC MATT.
ISAC Reply 3ACW added to MRC MATT.
ISAC Reply 3ACX added to MRC MATT.
ISAC Reply 3ACY added to MRC MATT.
ISAC Reply 3ACZ added to MRC MATT.
ISAC Reply 3ADA added to MRC MATT.
ISAC Reply 3ADB added to MRC MATT.
ISAC Reply 3ADC added to MRC MATT.
ISAC Reply 3ADD added to MRC MATT.
ISAC Reply 3ADE added to MRC MATT.
ISAC Reply 3ADF added to MRC MATT.
ISAC Reply 3ADG added to MRC MATT.
ISAC Reply 3ADH added to MRC MATT.
ISAC Reply 3ADI added to MRC MATT.
ISAC Reply 3ADK added to MRC MATT.
ISAC Reply 3ADL added to MRC MATT.
ISAC Reply 3ADM added to MRC MATT.
ISAC Reply 3ADN added to MRC MATT.
ISAC Reply 3ADO added to MRC MATT.
ISAC Reply 3ADP added to MRC MATT.
ISAC Reply 3ADQ added to MRC MATT.
ISAC Reply 3ADR added to MRC MATT.
ISAC Reply 3ADS added to MRC MATT.
ISAC Reply 3ADT added to MRC MATT.
ISAC Reply 3ADU added to MRC MATT.
ISAC Reply 3ADV added to MRC MATT.
ISAC Reply 3ADW added to MRC MATT.
ISAC Reply 3ADX added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 2AB deleted from MRC MATT.
ISAC Reply 2AC deleted from MRC MATT.
ISAC Reply 2AD deleted from MRC MATT.
ISAC Reply 2AE deleted from MRC MATT.
ISAC Reply 2AF deleted from MRC MATT.
ISAC Reply 2AG deleted from MRC MATT.
ISAC Reply 2AH deleted from MRC MATT.
ISAC Reply 2AJ deleted from MRC MATT.
ISAC Reply 2AK deleted from MRC MATT.
ISAC Reply 2AL deleted from MRC MATT.
ISAC Reply 2AM deleted from MRC MATT.
ISAC Reply 2AN deleted from MRC MATT.
ISAC Reply 2AP deleted from MRC MATT.
ISAC Reply 2AQ deleted from MRC MATT.
ISAC Reply 2AR deleted from MRC MATT.
ISAC Reply 2AS deleted from MRC MATT.
ISAC Reply 2AT deleted from MRC MATT.
ISAC Reply 2AU deleted from MRC MATT.
ISAC Reply 2AV deleted from MRC MATT.
ISAC Reply 2AW deleted from MRC MATT.
ISAC Reply 2AX deleted from MRC MATT.
ISAC Reply 2AY deleted from MRC MATT.
ISAC Reply 2AZ deleted from MRC MATT.
ISAC Reply 2BA deleted from MRC MATT.
ISAC Reply 2BB deleted from MRC MATT.
ISAC Reply 2BC deleted from MRC MATT.
ISAC Reply 2BD deleted from MRC MATT.
ISAC Reply 2BE deleted from MRC MATT.
ISAC Reply 2BF deleted from MRC MATT.
ISAC Reply 2BG deleted from MRC MATT.
ISAC Reply 2BH deleted from MRC MATT.
ISAC Reply 2BJ deleted from MRC MATT.
ISAC Reply 2BK deleted from MRC MATT.
ISAC Reply 2BL deleted from MRC MATT.
ISAC Reply 2BM deleted from MRC MATT.
ISAC Reply 2BN deleted from MRC MATT.
ISAC Reply 2BP deleted from MRC MATT.
ISAC Reply 2BQ deleted from MRC MATT.
ISAC Reply 2BR deleted from MRC MATT.
ISAC Reply 2BS deleted from MRC MATT.
ISAC Reply 2BT deleted from MRC MATT.
ISAC Reply 2BU deleted from MRC MATT.
ISAC Reply 2BV deleted from MRC MATT.
ISAC Reply 2BW deleted from MRC MATT.
ISAC Reply 2BX deleted from MRC MATT.
ISAC Reply 2XX deleted from MRC MATT.
ISAC Reply 3ABE added to MRC MDCL.
ISAC Reply 3ACC added to MRC MDCL.
ISAC Reply 3ACD added to MRC MDCL.
ISAC Reply 3ACH added to MRC MDCL.
ISAC Reply 3ACI added to MRC MDCL.
ISAC Reply 3ACJ added to MRC MDCL.
ISAC Reply 3ACK added to MRC MDCL.
ISAC Reply 3ACL added to MRC MDCL.
ISAC Reply 3ACM added to MRC MDCL.
ISAC Reply 3ACN added to MRC MDCL.
ISAC Reply 3ACO added to MRC MDCL.
ISAC Reply 3ACP added to MRC MDCL.
ISAC Reply 3ACQ added to MRC MDCL.
ISAC Reply 3ACR added to MRC MDCL.
ISAC Reply 3ACT added to MRC MDCL.
ISAC Reply 3ACU added to MRC MDCL.
ISAC Reply 3ACV added to MRC MDCL.
ISAC Reply 3ACW added to MRC MDCL.
ISAC Reply 3ACX added to MRC MDCL.
ISAC Reply 3ACY added to MRC MDCL.
ISAC Reply 3ACZ added to MRC MDCL.
ISAC Reply 3ADA added to MRC MDCL.
ISAC Reply 3ADB added to MRC MDCL.
ISAC Reply 3ADC added to MRC MDCL.
ISAC Reply 3ADD added to MRC MDCL.
ISAC Reply 3ADE added to MRC MDCL.
ISAC Reply 3ADF added to MRC MDCL.
ISAC Reply 3ADG added to MRC MDCL.
ISAC Reply 3ADH added to MRC MDCL.
ISAC Reply 3ADI added to MRC MDCL.
ISAC Reply 3ADK added to MRC MDCL.
ISAC Reply 3ADL added to MRC MDCL.
ISAC Reply 3ADM added to MRC MDCL.
ISAC Reply 3ADN added to MRC MDCL.
ISAC Reply 3ADO added to MRC MDCL.
ISAC Reply 3ADP added to MRC MDCL.
ISAC Reply 3ADQ added to MRC MDCL.
ISAC Reply 3ADR added to MRC MDCL.
ISAC Reply 3ADS added to MRC MDCL.
ISAC Reply 3ADT added to MRC MDCL.
ISAC Reply 3ADU added to MRC MDCL.
ISAC Reply 3ADV added to MRC MDCL.
ISAC Reply 3ADW added to MRC MDCL.
ISAC Reply 3ADX added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 2AB deleted from MRC MDCL.
ISAC Reply 2AC deleted from MRC MDCL.
ISAC Reply 2AD deleted from MRC MDCL.
ISAC Reply 2AE deleted from MRC MDCL.
ISAC Reply 2AF deleted from MRC MDCL.
ISAC Reply 2AG deleted from MRC MDCL.
ISAC Reply 2AH deleted from MRC MDCL.
ISAC Reply 2AJ deleted from MRC MDCL.
ISAC Reply 2AK deleted from MRC MDCL.
ISAC Reply 2AL deleted from MRC MDCL.
ISAC Reply 2AM deleted from MRC MDCL.
ISAC Reply 2AN deleted from MRC MDCL.
ISAC Reply 2AP deleted from MRC MDCL.
ISAC Reply 2AQ deleted from MRC MDCL.
ISAC Reply 2AR deleted from MRC MDCL.
ISAC Reply 2AS deleted from MRC MDCL.
ISAC Reply 2AT deleted from MRC MDCL.
ISAC Reply 2AU deleted from MRC MDCL.
ISAC Reply 2AV deleted from MRC MDCL.
ISAC Reply 2AW deleted from MRC MDCL.
ISAC Reply 2AX deleted from MRC MDCL.
ISAC Reply 2AY deleted from MRC MDCL.
ISAC Reply 2AZ deleted from MRC MDCL.
ISAC Reply 2BA deleted from MRC MDCL.
ISAC Reply 2BB deleted from MRC MDCL.
ISAC Reply 2BC deleted from MRC MDCL.
ISAC Reply 2BD deleted from MRC MDCL.
ISAC Reply 2BE deleted from MRC MDCL.
ISAC Reply 2BF deleted from MRC MDCL.
ISAC Reply 2BG deleted from MRC MDCL.
ISAC Reply 2BH deleted from MRC MDCL.
ISAC Reply 2BJ deleted from MRC MDCL.
ISAC Reply 2BK deleted from MRC MDCL.
ISAC Reply 2BL deleted from MRC MDCL.
ISAC Reply 2BM deleted from MRC MDCL.
ISAC Reply 2BN deleted from MRC MDCL.
ISAC Reply 2BP deleted from MRC MDCL.
ISAC Reply 2BQ deleted from MRC MDCL.
ISAC Reply 2BR deleted from MRC MDCL.
ISAC Reply 2BS deleted from MRC MDCL.
ISAC Reply 2BT deleted from MRC MDCL.
ISAC Reply 2BU deleted from MRC MDCL.
ISAC Reply 2BV deleted from MRC MDCL.
ISAC Reply 2BW deleted from MRC MDCL.
ISAC Reply 2BX deleted from MRC MDCL.
ISAC Reply 2XX deleted from MRC MDCL.
ISAC Reply 3AEE added to MRC AGXF.
ISAC Reply 3DOV added to MRC AGXF.
ISAC Reply 3DPA added to MRC AGXF.
ISAC Reply 3DPJ added to MRC AGXF.
ISAC Reply 3DPS added to MRC AGXF.
ISAC Reply 3HOU added to MRC AGXF.
ISAC Reply 2AE deleted from MRC AGXF.
ISAC Reply 2BE deleted from MRC AGXF.
ISAC Reply 2CE deleted from MRC AGXF.
ISAC Reply 2DE deleted from MRC AGXF.
ISAC Reply 2ZE deleted from MRC AGXF.
ISAC Reply 3AEE added to MRC ABUJ.
ISAC Reply 3BAV added to MRC ABUJ.
ISAC Reply 3BAW added to MRC ABUJ.
ISAC Reply 3BAZ added to MRC ABUJ.
ISAC Reply 3BBA added to MRC ABUJ.
ISAC Reply 3HOU added to MRC ABUJ.
ISAC Reply 1A deleted from MRC ABUJ.
ISAC Reply 1B deleted from MRC ABUJ.
ISAC Reply 1C deleted from MRC ABUJ.
ISAC Reply 1D deleted from MRC ABUJ.
ISAC Reply 1Y deleted from MRC ABUJ.
ISAC Reply 3ABE added to MRC SFTT.
ISAC Reply 3ACH added to MRC SFTT.
ISAC Reply 3ACI added to MRC SFTT.
ISAC Reply 3ACJ added to MRC SFTT.
ISAC Reply 3ACK added to MRC SFTT.
ISAC Reply 3ACL added to MRC SFTT.
ISAC Reply 3ACM added to MRC SFTT.
ISAC Reply 3ACN added to MRC SFTT.
ISAC Reply 3ACO added to MRC SFTT.
ISAC Reply 3ACP added to MRC SFTT.
ISAC Reply 3ACQ added to MRC SFTT.
ISAC Reply 3ACT added to MRC SFTT.
ISAC Reply 3ACU added to MRC SFTT.
ISAC Reply 3ACX added to MRC SFTT.
ISAC Reply 3ACY added to MRC SFTT.
ISAC Reply 3ADA added to MRC SFTT.
ISAC Reply 3ADB added to MRC SFTT.
ISAC Reply 3ADC added to MRC SFTT.
ISAC Reply 3ADD added to MRC SFTT.
ISAC Reply 3ADE added to MRC SFTT.
ISAC Reply 3ADF added to MRC SFTT.
ISAC Reply 3ADG added to MRC SFTT.
ISAC Reply 3ADH added to MRC SFTT.
ISAC Reply 3ADI added to MRC SFTT.
ISAC Reply 3ADK added to MRC SFTT.
ISAC Reply 3ADL added to MRC SFTT.
ISAC Reply 3ADM added to MRC SFTT.
ISAC Reply 3ADO added to MRC SFTT.
ISAC Reply 3ADP added to MRC SFTT.
ISAC Reply 3ADQ added to MRC SFTT.
ISAC Reply 3ADR added to MRC SFTT.
ISAC Reply 3ADS added to MRC SFTT.
ISAC Reply 3ADT added to MRC SFTT.
ISAC Reply 3ADU added to MRC SFTT.
ISAC Reply 3ADV added to MRC SFTT.
ISAC Reply 3ADW added to MRC SFTT.
ISAC Reply 3ADX added to MRC SFTT.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 2AB deleted from MRC SFTT.
ISAC Reply 2AC deleted from MRC SFTT.
ISAC Reply 2AD deleted from MRC SFTT.
ISAC Reply 2AE deleted from MRC SFTT.
ISAC Reply 2AF deleted from MRC SFTT.
ISAC Reply 2AG deleted from MRC SFTT.
ISAC Reply 2AH deleted from MRC SFTT.
ISAC Reply 2AJ deleted from MRC SFTT.
ISAC Reply 2AK deleted from MRC SFTT.
ISAC Reply 2AL deleted from MRC SFTT.
ISAC Reply 2AM deleted from MRC SFTT.
ISAC Reply 2AN deleted from MRC SFTT.
ISAC Reply 2AP deleted from MRC SFTT.
ISAC Reply 2AQ deleted from MRC SFTT.
ISAC Reply 2AR deleted from MRC SFTT.
ISAC Reply 2AS deleted from MRC SFTT.
ISAC Reply 2AT deleted from MRC SFTT.
ISAC Reply 2AU deleted from MRC SFTT.
ISAC Reply 2AV deleted from MRC SFTT.
ISAC Reply 2AW deleted from MRC SFTT.
ISAC Reply 2AX deleted from MRC SFTT.
ISAC Reply 2AY deleted from MRC SFTT.
ISAC Reply 2AZ deleted from MRC SFTT.
ISAC Reply 2BA deleted from MRC SFTT.
ISAC Reply 2BB deleted from MRC SFTT.
ISAC Reply 2BC deleted from MRC SFTT.
ISAC Reply 2BD deleted from MRC SFTT.
ISAC Reply 2BE deleted from MRC SFTT.
ISAC Reply 2BF deleted from MRC SFTT.
ISAC Reply 2BG deleted from MRC SFTT.
ISAC Reply 2BH deleted from MRC SFTT.
ISAC Reply 2BJ deleted from MRC SFTT.
ISAC Reply 2BK deleted from MRC SFTT.
ISAC Reply 2BL deleted from MRC SFTT.
ISAC Reply 2BM deleted from MRC SFTT.
ISAC Reply 2BN deleted from MRC SFTT.
ISAC Reply 2BP deleted from MRC SFTT.
ISAC Reply 2BQ deleted from MRC SFTT.
ISAC Reply 2BR deleted from MRC SFTT.
ISAC Reply 2BS deleted from MRC SFTT.
ISAC Reply 2BT deleted from MRC SFTT.
ISAC Reply 2BU deleted from MRC SFTT.
ISAC Reply 2BV deleted from MRC SFTT.
ISAC Reply 2BW deleted from MRC SFTT.
ISAC Reply 2BX deleted from MRC SFTT.
ISAC Reply 2XX deleted from MRC SFTT.
ISAC Reply 3ABE added to MRC STDC.
ISAC Reply 3ACH added to MRC STDC.
ISAC Reply 3ACI added to MRC STDC.
ISAC Reply 3ACJ added to MRC STDC.
ISAC Reply 3ACK added to MRC STDC.
ISAC Reply 3ACL added to MRC STDC.
ISAC Reply 3ACM added to MRC STDC.
ISAC Reply 3ACN added to MRC STDC.
ISAC Reply 3ACO added to MRC STDC.
ISAC Reply 3ACP added to MRC STDC.
ISAC Reply 3ACQ added to MRC STDC.
ISAC Reply 3ACT added to MRC STDC.
ISAC Reply 3ACU added to MRC STDC.
ISAC Reply 3ACX added to MRC STDC.
ISAC Reply 3ACY added to MRC STDC.
ISAC Reply 3ADA added to MRC STDC.
ISAC Reply 3ADB added to MRC STDC.
ISAC Reply 3ADC added to MRC STDC.
ISAC Reply 3ADD added to MRC STDC.
ISAC Reply 3ADE added to MRC STDC.
ISAC Reply 3ADF added to MRC STDC.
ISAC Reply 3ADG added to MRC STDC.
ISAC Reply 3ADH added to MRC STDC.
ISAC Reply 3ADI added to MRC STDC.
ISAC Reply 3ADK added to MRC STDC.
ISAC Reply 3ADL added to MRC STDC.
ISAC Reply 3ADM added to MRC STDC.
ISAC Reply 3ADO added to MRC STDC.
ISAC Reply 3ADP added to MRC STDC.
ISAC Reply 3ADQ added to MRC STDC.
ISAC Reply 3ADR added to MRC STDC.
ISAC Reply 3ADS added to MRC STDC.
ISAC Reply 3ADT added to MRC STDC.
ISAC Reply 3ADU added to MRC STDC.
ISAC Reply 3ADV added to MRC STDC.
ISAC Reply 3ADW added to MRC STDC.
ISAC Reply 3ADX added to MRC STDC.
ISAC Reply 3AEE added to MRC STDC.
ISAC Reply 3HOU added to MRC STDC.
ISAC Reply 2AB deleted from MRC STDC.
ISAC Reply 2AC deleted from MRC STDC.
ISAC Reply 2AD deleted from MRC STDC.
ISAC Reply 2AE deleted from MRC STDC.
ISAC Reply 2AF deleted from MRC STDC.
ISAC Reply 2AG deleted from MRC STDC.
ISAC Reply 2AH deleted from MRC STDC.
ISAC Reply 2AJ deleted from MRC STDC.
ISAC Reply 2AK deleted from MRC STDC.
ISAC Reply 2AL deleted from MRC STDC.
ISAC Reply 2AM deleted from MRC STDC.
ISAC Reply 2AN deleted from MRC STDC.
ISAC Reply 2AP deleted from MRC STDC.
ISAC Reply 2AQ deleted from MRC STDC.
ISAC Reply 2AR deleted from MRC STDC.
ISAC Reply 2AS deleted from MRC STDC.
ISAC Reply 2AT deleted from MRC STDC.
ISAC Reply 2AU deleted from MRC STDC.
ISAC Reply 2AV deleted from MRC STDC.
ISAC Reply 2AW deleted from MRC STDC.
ISAC Reply 2AX deleted from MRC STDC.
ISAC Reply 2AY deleted from MRC STDC.
ISAC Reply 2AZ deleted from MRC STDC.
ISAC Reply 2BA deleted from MRC STDC.
ISAC Reply 2BB deleted from MRC STDC.
ISAC Reply 2BC deleted from MRC STDC.
ISAC Reply 2BD deleted from MRC STDC.
ISAC Reply 2BE deleted from MRC STDC.
ISAC Reply 2BF deleted from MRC STDC.
ISAC Reply 2BG deleted from MRC STDC.
ISAC Reply 2BH deleted from MRC STDC.
ISAC Reply 2BJ deleted from MRC STDC.
ISAC Reply 2BK deleted from MRC STDC.
ISAC Reply 2BL deleted from MRC STDC.
ISAC Reply 2BM deleted from MRC STDC.
ISAC Reply 2BN deleted from MRC STDC.
ISAC Reply 2BP deleted from MRC STDC.
ISAC Reply 2BQ deleted from MRC STDC.
ISAC Reply 2BR deleted from MRC STDC.
ISAC Reply 2BS deleted from MRC STDC.
ISAC Reply 2BT deleted from MRC STDC.
ISAC Reply 2BU deleted from MRC STDC.
ISAC Reply 2BV deleted from MRC STDC.
ISAC Reply 2BW deleted from MRC STDC.
ISAC Reply 2BX deleted from MRC STDC.
ISAC Reply 2XX deleted from MRC STDC.
ISAC Reply 3ABE added to MRC HUES.
ISAC Reply 3ACJ added to MRC HUES.
ISAC Reply 3ACK added to MRC HUES.
ISAC Reply 3ACU added to MRC HUES.
ISAC Reply 3ACX added to MRC HUES.
ISAC Reply 3ADC added to MRC HUES.
ISAC Reply 3ADE added to MRC HUES.
ISAC Reply 3ADF added to MRC HUES.
ISAC Reply 3ADH added to MRC HUES.
ISAC Reply 3ADX added to MRC HUES.
ISAC Reply 3AEE added to MRC HUES.
ISAC Reply 3HOU added to MRC HUES.
ISAC Reply 2AB deleted from MRC HUES.
ISAC Reply 2AC deleted from MRC HUES.
ISAC Reply 2AD deleted from MRC HUES.
ISAC Reply 2AE deleted from MRC HUES.
ISAC Reply 2AF deleted from MRC HUES.
ISAC Reply 2AG deleted from MRC HUES.
ISAC Reply 2AH deleted from MRC HUES.
ISAC Reply 2AJ deleted from MRC HUES.
ISAC Reply 2AK deleted from MRC HUES.
ISAC Reply 2AL deleted from MRC HUES.
ISAC Reply 2AM deleted from MRC HUES.
ISAC Reply 2AN deleted from MRC HUES.
ISAC Reply 2AP deleted from MRC HUES.
ISAC Reply 2AQ deleted from MRC HUES.
ISAC Reply 2AR deleted from MRC HUES.
ISAC Reply 2AS deleted from MRC HUES.
ISAC Reply 2AT deleted from MRC HUES.
ISAC Reply 2AU deleted from MRC HUES.
ISAC Reply 2AV deleted from MRC HUES.
ISAC Reply 2AW deleted from MRC HUES.
ISAC Reply 2AX deleted from MRC HUES.
ISAC Reply 2AY deleted from MRC HUES.
ISAC Reply 2AZ deleted from MRC HUES.
ISAC Reply 2BA deleted from MRC HUES.
ISAC Reply 2BB deleted from MRC HUES.
ISAC Reply 2BC deleted from MRC HUES.
ISAC Reply 2BD deleted from MRC HUES.
ISAC Reply 2BE deleted from MRC HUES.
ISAC Reply 2BF deleted from MRC HUES.
ISAC Reply 2BG deleted from MRC HUES.
ISAC Reply 2BH deleted from MRC HUES.
ISAC Reply 2BJ deleted from MRC HUES.
ISAC Reply 2BK deleted from MRC HUES.
ISAC Reply 2BL deleted from MRC HUES.
ISAC Reply 2BM deleted from MRC HUES.
ISAC Reply 2BN deleted from MRC HUES.
ISAC Reply 2BP deleted from MRC HUES.
ISAC Reply 2BQ deleted from MRC HUES.
ISAC Reply 2BR deleted from MRC HUES.
ISAC Reply 2BS deleted from MRC HUES.
ISAC Reply 2BT deleted from MRC HUES.
ISAC Reply 2BU deleted from MRC HUES.
ISAC Reply 2BV deleted from MRC HUES.
ISAC Reply 2BW deleted from MRC HUES.
ISAC Reply 2BX deleted from MRC HUES.
ISAC Reply 2XX deleted from MRC HUES.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED53589*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3ADEDSTA000*;MATT3ADEDSTA000$DCCA000*;MATT3ADEDSTA000$$DCCA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3ACC | CAPACITIVE ELECTRODE |
| 3ACD | INSULATION SUPPORTING |
| 3ACH | BEARING SLEEVE |
| 3ACI | BOLT |
| 3ACJ | BASE PLATE |
| 3ACK | BUSHING |
| 3ACL | CAP |
| 3ACM | CHASSIS |
| 3ACN | CORE |
| 3ACO | CUP |
| 3ACP | DAMPER |
| 3ACQ | DOWELL PIN |
| 3ACR | END |
| 3ACT | EYELKET |
| 3ACU | FLANGE |
| 3ACV | FLANGE HOLDER |
| 3ACW | FRAME |
| 3ACX | HOLDER |
| 3ACY | HOUSING |
| 3ACZ | INNER BEARING SLEEVE |
| 3ADA | INNER BUSHING |
| 3ADB | INNER CUP |
| 3ADC | INNER MEMBER |
| 3ADD | INSERT |
| 3ADE | MOUNTING BASE |
| 3ADF | MOUNTING FLANGE PLATE |
| 3ADG | MOUNTING PLATE |
| 3ADH | MOUNTING PLATE ASSEMBLY |
| 3ADI | NUT |
| 3ADK | OUTER CUP |
| 3ADL | OUTER MEMBER |
| 3ADM | OUTER RING |
| 3ADN | OUTER SURFACE OF TUBE |
| 3ADO | PLATE |
| 3ADP | RETAINER |
| 3ADQ | RETAINING RING |
| 3ADR | RIVET |
| 3ADS | SPACER |
| 3ADT | SPRING |
| 3ADU | STUD |
| 3ADV | STUD ASSEMBLY |
| 3ADW | TUBE |
| 3ADX | WASHER |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL6061 | ALUMINUM ALLOY 6061 |
| CUB000 | COPPER ALLOY |
| CCA000 | COTTON |
| FEB000 | IRON CAST |
| NLB000 | NICKEL ALLOY |
| PCA000 | PLASTIC |
| PCCB00 | PLASTIC NYLON |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE (PET) |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAK00 | PLASTIC SILICONE |
| PCAW00 | PLASTIC TETRAFLUOROETHYLENE |
| PCBA00 | PLASTIC URETHANE |
| RCE000 | RUBBER |
| RC0019 | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| RC0022 | RUBBER BUTADIENE-STYRENE CLASS SBR |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RCA000 | RUBBER NATURAL |
| RC0020 | RUBBER POLYISOPRENE NATURAL CLASS NR |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| STA000 | STEEL |
| ST0302 | STEEL COMP 302 |
| ST0303 | STEEL COMP 303 |
| ST0304 | STEEL COMP 304 |
| STB000 | STEEL CORROSION RESISTING |
| TTB000 | TITANIUM |
| TTA000 | TITANIUM ALLOY |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3ACC | CAPACITIVE ELECTRODE |
| 3ACD | INSULATION SUPPORTING |
| 3ACH | BEARING SLEEVE |
| 3ACI | BOLT |
| 3ACJ | BASE PLATE |
| 3ACK | BUSHING |
| 3ACL | CAP |
| 3ACM | CHASSIS |
| 3ACN | CORE |
| 3ACO | CUP |
| 3ACP | DAMPER |
| 3ACQ | DOWELL PIN |
| 3ACR | END |
| 3ACT | EYELKET |
| 3ACU | FLANGE |
| 3ACV | FLANGE HOLDER |
| 3ACW | FRAME |
| 3ACX | HOLDER |
| 3ACY | HOUSING |
| 3ACZ | INNER BEARING SLEEVE |
| 3ADA | INNER BUSHING |
| 3ADB | INNER CUP |
| 3ADC | INNER MEMBER |
| 3ADD | INSERT |
| 3ADE | MOUNTING BASE |
| 3ADF | MOUNTING FLANGE PLATE |
| 3ADG | MOUNTING PLATE |
| 3ADH | MOUNTING PLATE ASSEMBLY |
| 3ADI | NUT |
| 3ADK | OUTER CUP |
| 3ADL | OUTER MEMBER |
| 3ADM | OUTER RING |
| 3ADN | OUTER SURFACE OF TUBE |
| 3ADO | PLATE |
| 3ADP | RETAINER |
| 3ADQ | RETAINING RING |
| 3ADR | RIVET |
| 3ADS | SPACER |
| 3ADT | SPRING |
| 3ADU | STUD |
| 3ADV | STUD ASSEMBLY |
| 3ADW | TUBE |
| 3ADX | WASHER |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
IF STYLE/REPLY CODE(s) 1, 2 OR 4 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABUJ and ADMZ and AGXF and BXCD)
IF STYLE/REPLY CODE(s) 3 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABUJ and ADMZ and ADNA and AGXF and BXCD and BXCF and BXCG)
IF STYLE/REPLY CODE(s) 5 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABUJ and AFQN and AGFF and AGXF and BXCD)
IF STYLE/REPLY CODE(s) 6 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABUJ and AFQN and AGFF and AGTN and AGXF and BXCD)
IF STYLE/REPLY CODE(s) 7 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABUJ and AFQN and AGFF and AGTN and AGXF and BXCD and BXCJ)
IF STYLE/REPLY CODE(s) 8, 9, 66 OR 10 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and ABXD and ADMZ and HGTH)
IF STYLE/REPLY CODE(s) 11 OR 12 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and ABKU and ABXD and ADMZ and ADNA and HGTH)
IF STYLE/REPLY CODE(s) 80 OR 13 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABUJ and ADMZ and HGTH)
IF STYLE/REPLY CODE(s) 20, 21, 24, 73, 87, 88 OR 89 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKU and ABUJ and AFQM and AFQN and AGFF and BXCQ and HGTH)
IF STYLE/REPLY CODE(s) 22, 23, 39, 54, 56 OR 58 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and ABKU and AFQM and AFQN and AGFF and BXCQ and HGTH)
IF STYLE/REPLY CODE(s) 25 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKU and AFQM and AFQN and AGFF and BXCD and BXCH and BXCM and BXCN and BXCP and BXCQ and HGTH)
IF STYLE/REPLY CODE(s) 26 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKU and ABUJ and AFQN and AGFF and BXCK and BXCL and BXCQ)
IF STYLE/REPLY CODE(s) 27 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and ABKU and AFQM and AFQN and BXCQ and HGTH)
IF STYLE/REPLY CODE(s) 28 OR 61 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKU and AFQM and AFQN and AGFF and BXCQ and HGTH)
IF STYLE/REPLY CODE(s) 29, 32, 35 OR 44 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and ABKU and ADMZ and BXCD and HGTH)
IF STYLE/REPLY CODE(s) 30, 33, 36, 45, 46, 48, 49, 51 OR 52 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and ABKU and AFQM and AFQN and AGFF and BXCD and BXCQ and HGTH)
IF STYLE/REPLY CODE(s) 31, 34, 37, 47 OR 71 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and ABKU and AFQM and AFQN and AGFF and BXCD and BXCH and BXCQ and HGTH)
IF STYLE/REPLY CODE(s) 38 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and ABKU and ADMZ and HGTH)
IF STYLE/REPLY CODE(s) 40, 41, 42, 43, 53, 55 OR 57 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and ABKU and AFQM and AFQN and AGFF and BXCH and BXCQ and HGTH)
IF STYLE/REPLY CODE(s) 50 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and AAVZ and ADMZ and BXCD and BXCP and HGTH)
IF STYLE/REPLY CODE(s) 96 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and AAVZ and ADMZ and AHGD and HGTH)
IF STYLE/REPLY CODE(s) 60 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKU and ABUJ and AFQM and AFQN and AGFF and AGXF and BXCH and BXCQ and HGTH)
IF STYLE/REPLY CODE(s) 62 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and ABKU and AFQM and AFQN and AGFF and BXCH and HGTH)
IF STYLE/REPLY CODE(s) 63, 64, 75 OR 76 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKU and ABUJ and AFQM and AFQN and AGFF and BXCH and BXCQ and HGTH)
IF STYLE/REPLY CODE(s) 65 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKU and ABUJ and AFQM and AFQN and AGFF and BXCH and BXCQ and BXCS and HGTH)
IF STYLE/REPLY CODE(s) 67, 68 OR 69 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and ABKU and ADMZ and BXCR and BXCS and HGTH)
IF STYLE/REPLY CODE(s) 70 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and ADMZ and BXCR and HGTH)
IF STYLE/REPLY CODE(s) 72 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and ABKU and AFQM and AFQN and BXCD and BXCQ and HGTH)
IF STYLE/REPLY CODE(s) 74 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKU and ABUJ and ABXD and ADMZ and AFQM and AFQN and AGFF and AGXF and BXCD and HGTH)
IF STYLE/REPLY CODE(s) 78 OR 79 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKU and ABUJ and ADMZ and AFQM and AFQN and AGFF and BXCH and BXCQ and HGTH)
IF STYLE/REPLY CODE(s) 84, 85 OR 86 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKU and ABUJ and AFQM and AFQN and AGFF and AGXF and BXCQ and HGTH)
IF STYLE/REPLY CODE(s) 93 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and ADMZ and HGTH)
IF STYLE/REPLY CODE(s) 94 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AARX and AFQM and AFQN and AGFF and BXCQ)
IF STYLE/REPLY CODE(s) 59 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKU and AFQM and AFQN and AGFF and BXCH and BXCQ and HGTH)
IF STYLE/REPLY CODE(s) 77 OR 81 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABUJ and ADMZ and AGXF and HGTH)
IF STYLE/REPLY CODE(s) 95 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADMZ and AFQM and BXCQ)
IF STYLE/REPLY CODE(s) 90 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AFQM and HGTH)
STYL*LSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLL57)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AX10072 | 1 | ROUND W/FLANGE THREADED STUD |
| AX10081 | 10 | ROUND W/BUSHINGS |
| AX10082 | 11 | ROUND W/BUSHINGS EXT. FLANGE |
| AX10083 | 12 | ROUND W/FLANGE EXT. FLANGE |
| AX10084 | 13 | ROUND INT. THREADED FLANGES |
| AX10073 | 2 | ROUND W/FLANGE THREADED STUD |
| AX10085 | 20 | ROUND INT. THREADED FLANGE TWO-HOLE FLANGE |
| AX10086 | 21 | ROUND INT. THREADED BUSHING TWO-HOLE FLANGE |
| AX10087 | 22 | ROUND W/FLANGED BUSHING TWO/HOLE FLANGE |
| AX10088 | 23 | RECTANGULAR W/FLANGED BUSHING TWO-HOLE FLANGE |
| AX10089 | 24 | RECTANGULAR W/THREADED BUSHING AND TWO ONE-HOLE FLANGES |
| AX10090 | 25 | RECTANGULAR W/T SLOT AND TWO-HOLE FLANGE |
| AX10091 | 26 | RECTANGULAR W/THREADED INSERT AND RIGHT ANGLE ONE-HOLE FLANGE |
| AX10092 | 27 | RECTANGULAR W/FLANGED BUSHING AND TWO RIGHT ANGLE ONE-HOLE FLANGES |
| AX10093 | 28 | RECTANGULAR TWO ONE-HOLE FLANGES |
| AX10094 | 29 | ROUND W/BUSHING ROUND FLANGE |
| AX10074 | 3 | ROUND W/FLANGE THREADED STUD |
| AX10095 | 30 | ROUND W/BUSHING TWO-HOLE FLANGE |
| AX10096 | 31 | ROUND W/BUSHING FOUR-HOLE FLANGE |
| AX10097 | 32 | ROUND W/BUSHING ROUND FLANGE |
| AX10098 | 33 | ROUND W/BUSHING TWO-HOLE FLANGE |
| AX10099 | 34 | ROUND W/BUSHING FOUR-HOLE FLANGE |
| AX10100 | 35 | ROUND W/BUSHING ROUND FLANGE |
| AX10101 | 36 | ROUND W/BUSHING TWO-HOLE FLANGE |
| AX10102 | 37 | ROUND W/BUSHING FOUR-HOLE FLANGE |
| AX10103 | 38 | ROUND W/BUSHING ROUND FLANGE |
| AX10104 | 39 | ROUND W/BUSHING TWO-HOLE FLANGE |
| AX10075 | 4 | ROUND W/FLANGE THREADED STUD |
| AX10105 | 40 | ROUND W/BUSHING FOUR-HOLE FLANGE |
| AX10106 | 41 | ROUND W/BUSHING FOUR-HOLE FLANGE |
| AX10107 | 42 | ROUND W/BUSHING FOUR-HOLE FLANGE |
| AX10108 | 43 | ROUND W/BUSHING FOUR-HOLE FLANGE |
| AX10109 | 44 | ROUND W/ BUSHING ROUND FLANGE |
| AX10110 | 45 | ROUND W/FLANGED BUSHING TWO-HOLE FLANGE |
| AX10111 | 46 | ROUND W/FLANGED BUSHING TWO-HOLE FLANGE |
| AX10112 | 47 | ROUND W/BUSHING FOUR-HOLE FLANGE |
| AX10113 | 48 | ROUND W/FLANGED BUSHING TWO-HOLE FLANGE |
| AX10114 | 49 | ROUND W/FLANGED BUSHING TWO-HOLE FLANGE |
| AX10076 | 5 | SQUARE W/FLANGE THREADED STUD |
| AX10115 | 50 | ROUND W/FLANGED BUSHING GROOVED ROUND FLANGE |
| AX10116 | 51 | ROUND TWO-HOLE FLANGE |
| AX10117 | 52 | ROUND W/FLANGED BUSHING TWO-HOLE FLANGE |
| AX10118 | 53 | ROUND W/FLANGED BUSHING FOUR-HOLE FLANGE |
| AX10119 | 54 | ROUND W/FLANGED BUSHING TWO-HOLE FLANGE |
| AX10120 | 55 | ROUND W/FLANGED BUSHING FOUR-HOLE FLANGE |
| AX10121 | 56 | ROUND W/FLANGED BUSHING TWO-HOLE FLANGE |
| AX10122 | 57 | ROUND W/FLANGED BUSHING FOUR-HOLE FLANGE |
| AX10123 | 58 | ROUND W/FLANGED BUSHING TWO-HOLE FLANGE |
| AX10124 | 59 | ROUND W/FLANGED BUSHING FOUR-HOLE FLANGE |
| AX10077 | 6 | RECTANGULAR W/FOUR THREADED STUDS |
| AX10125 | 60 | ROUND SPRING COMPRESSION FOUR-HOLE FLANGE |
| AX10126 | 61 | RECTANGULAR SPRING COMPRESSION TWO-HOLE FLANGE |
| AX10127 | 62 | ROUND SPRING COMPRESSION FOUR-HOLE FLANGE |
| AX10128 | 63 | ROUND SPRING COMPRESSION FOUR-HOLE FLANGE |
| AX10129 | 64 | ROUND FOUR-HOLE FLANGE |
| AX10130 | 65 | ROUND FOUR-HOLE FLANGE |
| AX10131 | 66 | ROUND TWO-BUSHINGS |
| AX10132 | 67 | ROUND W/FOUR FLANGES |
| AX10133 | 68 | ROUND FLEXIBLE |
| AX10134 | 69 | ROUND FLEXIBLE |
| AX10078 | 7 | RECTANGULAR W/EIGHT THREADED STUDS |
| AX10135 | 70 | ROUND FLEXIBLE |
| AX10137 | 71 | ROUND FOUR-HOLE FLANGE |
| AX10136 | 72 | ROUND TWO-HOLE FLANGE |
| AX10138 | 73 | ROUND TWO-HOLE FLANGE |
| AX10139 | 74 | ROUND VERTICAL TWO-HOLE FLANGE |
| AX10140 | 75 | ROUND FOUR-HOLE FLANGE |
| AX10141 | 76 | ROUND FOUR-HOLE FLANGE |
| AX10142 | 77 | ROUND W/ONE THREADED STUD |
| AX10143 | 78 | ROUND W/FOUR-HOLE FLANGE |
| AX10144 | 79 | ROUND W/FOUR-HOLE FLANGE |
| AX10079 | 8 | ROUND W/BUSHINGS |
| AX10145 | 80 | TWO NUTS |
| AX10146 | 81 | STUD AND NUT |
| AX10147 | 84 | SQUARE W/THREADED STUD TWO-HOLE FLANGE |
| AX10148 | 85 | RECTANGULAR W/TWO THREADED STUDS TWO-HOLE FLANGE |
| AX10149 | 86 | RECTANGULAR W/FOUR THREADED STUDS TWO-HOLE FLANGE |
| AX10150 | 87 | SQUARE W/INTERNALLY THREADED FLANGE TWO-HOLE FLANGE |
| AX10151 | 88 | RECTANGULAR TWO INTERNALLY THREADED FLANGES TWO-HOLE FLANGE |
| AX10152 | 89 | RECTANGULAR FOUR INTERNALLY THREADED FLANGES TWO-HOLE FLANGE |
| AX10080 | 9 | ROUND W/BUSHINGS |
| AX10153 | 90 | RECTANGULAR W/WIRE ROPE |
| DQ00306 | 93 | ROUND W/INTERNAL BUSHING |
| DQ00307 | 94 | RECTANGULAR, 2 ELEMENTS |
| DQ00308 | 95 | VARIABLE SUPPORT W/BALL AND SOCKET JOINTS |
| DQ00816 | 96 | STACKABLE RESILIENT DISC |
AARX*JINSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AARXJAA2.0*;AARXJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AAVZ*JGROOVE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE GROOVE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAVZJAA2.0*;AAVZJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKU*JFLANGE THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF A FLANGE,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKUJAA2.0*;ABKUJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABXD*JBUSHING LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A BUSHING,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABXDJAA2.0*;ABXDJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADMZ*JMAJOR OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE LARGEST END OF AN ITEM,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADMZJAA2.0*;ADMZJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADNA*JMINOR OUTSIDE DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADNAJAA2.0*;ADNAJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFQM*JDISTANCE BETWEEN MOUNTING HOLE CENTERS
THE DISTANCE BETWEEN THE CENTERLINE OF THE MOUNTING HOLES.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFQMJAA2.0*;AFQMJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFQN*JFLANGE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A FLANGE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFQNJAA2.0*;AFQNJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGFF*JFLANGE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A FLANGE,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGFFJAA2.0*;AGFFJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGTN*JDISTANCE BETWEEN MOUNTING STUD CENTERS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGTNJAA2.0*;AGTNJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BXCD*JDISTANCE FROM FLANGE TO END
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BXCDJAA2.0*;BXCDJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BXCF*JSTUD LENGTH AT LARGE END OF BODY TAPER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BXCFJAA2.0*;BXCFJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BXCH*JSHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BXCHJAA2.0*;BXCHJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BXCJ*JSHORTEST DISTANCE BETWEEN MOUNTING STUD CENTERS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BXCJJAA2.0*;BXCJJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BXCK*JDISTANCE FROM MOUNTING SURFACE TO MOUNTING HOLE CENTER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BXCKJAA2.0*;BXCKJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BXCL*JSHORTEST DISTANCE FROM MOUNTING SURFACE TO MOUNTING HOLE CENTER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BXCLJAA2.0*;BXCLJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BXCM*JT SLOT MINOR WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BXCMJAA2.0*;BXCMJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BXCN*JT SLOT MAJOR WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BXCNJAA2.0*;BXCNJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BXCP*JSLOT HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BXCPJAA2.0*;BXCPJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BXCQ*JFLANGE MOUNTING HOLE DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BXCQJAA2.0*;BXCQJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BXCR*JFLEXING MEMBER HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BXCRJAA2.0*;BXCRJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BXCS*JFLEXING MEMBER OUTSIDE DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BXCSJAA2.0*;BXCSJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
HGTH*JHEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN OBJECT,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(HGTHJAA2.0*;HGTHJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGXF*JSTUD LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE STUD,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGXF3DPJJAA2.0*;AGXF3DPJJAB2.0$JAC2.0*;AGXF3DPJJAB2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DOV | FIRST THREADED STUD |
| 3DPA | SECOND THREADED STUD |
| 3DPJ | SINGLE PRESSURE CONNECTION |
| 3DPS | ALL THREADED STUD |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHGD*JFLANGE HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF A FLANGE,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHGDJAA2.0*;AHGDJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BXCG*ATHREAD SIZE AT LARGE END OF BODY TAPER
NONE.
Enter the alpha-numeric reply with a minimum of one character.
(BXCGAI8)
ABUJ*ATHREAD SIZE
DESIGNATES THE THREAD DIAMETER AND NUMBER OF THREADS PER SPECIFIC MEASUREMENT SCALE.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(ABUJ3BAVAI6)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BAV | FIRST THREADED PORTION |
| 3BAW | SECOND THREADED PORTION |
| 3BAZ | SINGLE THREADED PORTION |
| 3BBA | ALL THREADED PORTIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
ADUM*JOVERALL THICKNESS
AN OVERALL MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUMJLC2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AASF*JNONMETALLIC HARDNESS RATING
A NUMERIC VALUE THAT REFLECTS THE HARDNESS OF A NONMETALLIC ITEM WHEN USED IN CONJUNCTION WITH A HARDNESS RATING SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AASFJBSR2.0*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 2 |
| Reply Code (AC26) | Reply |
| DH | DUROMETER |
| SR | SHORE DUROMETER |
| SA | SHORE DUROMETER A |
| SB | SHORE DUROMETER B |
| SE | SHORE DUROMETER C |
| SD | SHORE DUROMETER D |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3ADEDLQA000*;SFTT3ADEDLQA000$DPHD000*;SFTT3ADEDLQA000$$DPHD000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3ACH | BEARING SLEEVE |
| 3ACI | BOLT |
| 3ACJ | BASE PLATE |
| 3ACK | BUSHING |
| 3ACL | CAP |
| 3ACM | CHASSIS |
| 3ACN | CORE |
| 3ACO | CUP |
| 3ACP | DAMPER |
| 3ACQ | DOWELL PIN |
| 3ACT | EYELKET |
| 3ACU | FLANGE |
| 3ACX | HOLDER |
| 3ACY | HOUSING |
| 3ADA | INNER BUSHING |
| 3ADB | INNER CUP |
| 3ADC | INNER MEMBER |
| 3ADD | INSERT |
| 3ADE | MOUNTING BASE |
| 3ADF | MOUNTING FLANGE PLATE |
| 3ADG | MOUNTING PLATE |
| 3ADH | MOUNTING PLATE ASSEMBLY |
| 3ADI | NUT |
| 3ADK | OUTER CUP |
| 3ADL | OUTER MEMBER |
| 3ADM | OUTER RING |
| 3ADO | PLATE |
| 3ADP | RETAINER |
| 3ADQ | RETAINING RING |
| 3ADR | RIVET |
| 3ADS | SPACER |
| 3ADT | SPRING |
| 3ADU | STUD |
| 3ADV | STUD ASSEMBLY |
| 3ADW | TUBE |
| 3ADX | WASHER |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| ALB000 | ALUMINUM |
| ALA000 | ALUMINUM ALLOY |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CLB000 | CERAMIC |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CUB000 | COPPER ALLOY |
| ENA000 | ENAMEL |
| LQA000 | LACQUER |
| NLA000 | NICKEL |
| XXA000 | OXIDE FILM |
| PNA000 | PAINT |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PHD000 | PHOSPHATE ZINC |
| PCY000 | PLASTIC POLYURETHANE |
| RHA000 | RHODIUM |
| RCA000 | RUBBER |
| RCC000 | RUBBER NATURAL |
| SNA000 | TIN |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
| AAAAAB | ZINC NICKEL |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3ACH | BEARING SLEEVE |
| 3ACI | BOLT |
| 3ACJ | BASE PLATE |
| 3ACK | BUSHING |
| 3ACL | CAP |
| 3ACM | CHASSIS |
| 3ACN | CORE |
| 3ACO | CUP |
| 3ACP | DAMPER |
| 3ACQ | DOWELL PIN |
| 3ACT | EYELKET |
| 3ACU | FLANGE |
| 3ACX | HOLDER |
| 3ACY | HOUSING |
| 3ADA | INNER BUSHING |
| 3ADB | INNER CUP |
| 3ADC | INNER MEMBER |
| 3ADD | INSERT |
| 3ADE | MOUNTING BASE |
| 3ADF | MOUNTING FLANGE PLATE |
| 3ADG | MOUNTING PLATE |
| 3ADH | MOUNTING PLATE ASSEMBLY |
| 3ADI | NUT |
| 3ADK | OUTER CUP |
| 3ADL | OUTER MEMBER |
| 3ADM | OUTER RING |
| 3ADO | PLATE |
| 3ADP | RETAINER |
| 3ADQ | RETAINING RING |
| 3ADR | RIVET |
| 3ADS | SPACER |
| 3ADT | SPRING |
| 3ADU | STUD |
| 3ADV | STUD ASSEMBLY |
| 3ADW | TUBE |
| 3ADX | WASHER |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(HUES3ACKDPK0000*;HUES3ACKDPK0000$DBR0000*;HUES3ACKDPK0000$$DBR0000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3ACJ | BASE PLATE |
| 3ACK | BUSHING |
| 3ACU | FLANGE |
| 3ACX | HOLDER |
| 3ADC | INNER MEMBER |
| 3ADE | MOUNTING BASE |
| 3ADF | MOUNTING FLANGE PLATE |
| 3ADH | MOUNTING PLATE ASSEMBLY |
| 3ADX | WASHER |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BR0000 | BROWN |
| CR0000 | CREAM |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| RG0000 | ORANGE |
| PK0000 | PINK |
| RE0000 | RED |
| SL0000 | SILVER |
| TA0000 | TAN |
| WH0000 | WHITE |
| YE0000 | YELLOW |
IF YOU ANSWER MRC HDCL, YOU MUST ANSWER MRC (HUES)
HDCL*JCOLOR DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,MANUFACTURERS REFERENCE,OR INDEX SYSTEM AND THE CLASIFICATION DESIGNATION, USED TO IDENTIFY COLOR, COLOR SELECTION, COLOR MATCHING AND QUALITY CONTROL OF A SPECIFIC COLOR.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(HDCLJEATEXT1234*;HDCLJEATEXT1234$$JEATEXT1234*;HDCLJEATEXT1234$JEATEXT1234*;HDCL1BJEATEXT1234*;HDCL1BJEATEXT1234$$JEATEXT1234*;HDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP93) | Reply |
| M | 10TH COLOR RESPONSE |
| N | 11TH COLOR RESPONSE |
| P | 12TH COLOR RESPONSE |
| Q | 13TH COLOR RESPONSE |
| R | 14TH COLOR RESPONSE |
| S | 15TH COLOR RESPONSE |
| T | 16TH COLOR RESPONSE |
| U | 17TH COLOR RESPONSE |
| W | 18TH COLOR RESPONSE |
| X | 19TH COLOR RESPONSE |
| B | 1ST COLOR RESPONSE |
| Y | 20TH COLOR RESPONSE |
| Z | 21ST COLOR RESPONSE |
| V | 22ND COLOR RESPONSE |
| C | 2ND COLOR RESPONSE |
| D | 3RD COLOR RESPONSE |
| E | 4TH COLOR RESPONSE |
| F | 5TH COLOR RESPONSE |
| H | 6TH COLOR RESPONSE |
| J | 7TH COLOR RESPONSE |
| K | 8TH COLOR RESPONSE |
| L | 9TH COLOR RESPONSE |
| G | ALL COLOR RESPONSE |
| A | SINGLE COLOR RESPONSE |
BXCW*GLOAD/FREQUENCY RANGE
THE RATED LOAD THE ITEM IS DESIGNED TO ACCOMMODATE AT A SPECIFIED FREQUENCY RANGE.
Enter clear text.
(BXCWGCLEARTEXT)
BXCT*GSTATIC LOAD RATING AT SPECIFIED DEFLECTION
THE RATED STATIC LOAD WHICH THE ITEM IS DESIGNED TO ACCOMMODATE AT A SPECIFIED DEFLECTION.
Enter clear text.
(BXCTGCLEARTEXT)
AKMZ*JSTATIC LOAD RATING
THE WEIGHT APPLIED TO AN ITEM TO MEASURE IS ABILITY TO SUPPORT A COMPONENT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKMZJPA2.0*;AKMZJPB2.0$$JPC2.1*)
| Table 1 |
| Reply Code (AN93) | Reply |
| K | KILOGRAMS |
| P | POUNDS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKNU*JDEFLECTION AT STATIC LOAD RATING
THE COMPRESSION OF AN ITEM WHEN A DEFINED FORCE IS APPLIED ALONG THE DIRECTION OF THE APPLIED FORCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKNUJAA2.0*;AKNUJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKPU*JRATED FREQUENCY LOAD CAPACITY
THE WEIGHT THAT IS APPLIED TO AN ITEM TO DETERMINE THE ABILITY TO CARRY THAT WEIGHT WHILE BEING VIBRATED WITHOUT DAMAGING THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKPUJPA2.0*;AKPUJPB2.0$$JPC2.1*)
| Table 1 |
| Reply Code (AN93) | Reply |
| K | KILOGRAMS |
| P | POUNDS |
| Table 2 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| A | INCHES |
| B | MILS |
AKQN*JFREQUENCY AT LOAD
THE VIBRATION, IN CYCLES PER SECOND (HERTZ), THAT IS USED ON AN ITEM TO DETERMINE THE ABILITY OF THE ITEM TO ABSORB FORCE WITHOUT DAMAGE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKQNJEA2.0*;AKQNJEB2.0$$JEC2.1*)
| Table 1 |
| Reply Code (AC32) | Reply |
| G | GIGAHERTZ |
| E | HERTZ |
| K | KILOHERTZ |
| M | MEGAHERTZ |
| Table 2 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| A | INCHES |
| B | MILS |
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAA2.0*;ABRYJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJAA2.0*;ABGLJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMZ*JDIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMZJAA2.0*;ABMZJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
ASZDJLOAD RATING
THE RATED LOAD THE ITEM IS DESIGNED TO ACCOMMODATE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ASZDJCZC2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| AJ | KILOGRAMS |
| AS | POUNDS |
| CZ | POUNDS PER FOOT |
| BY | TONS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information