A controller which is a manually operated electrical item designed to control movements and directions of a hoist.It may be cabin mounted or a component of a CONTROL STATION, HOIST or the like.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED51821*)
IF STYLE/REPLY CODE(s) M WERE ENTERED FOR MRC ANQC, YOU MUST ANSWER MRC (AJXE)
ANQCDNATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION STANDARDS DESIGN
AN INDICATION OF WHETHER OR NOT THE ITEM IS DESIGNED IN CONFORMANCE WITH THE NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA) STANDARDS.
Enter the applicable reply code from the table below
(ANQCDP)
| Table 1 |
| Reply Code (AJ97) | Reply |
| M | DESIGNED PER NEMA STD |
| P | NOT DESIGNED PER NEMA STD |
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
AJXE*ASIZE DESIGNATOR
A DESIGNATION INDICATING THE SIZE BY WHICH THE ITEM IS COMMERCIALLY KNOWN AND/OR IDENTIFIED.
Enter the alpha-numeric reply with a minimum of one character.
(AJXEAQ6)
IF STYLE/REPLY CODE(s) AC WERE ENTERED FOR MRC ANCN, YOU MUST ANSWER MRC (ANCP)
ANCNDOPERATING VOLTAGE CHARACTERISTIC
AN INDICATION OF THE CHARACTERISTIC OF THE OPERATING VOLTAGE.
Enter the applicable reply code from the table below
(ANCNDAC*;ANCNDAB$DAC*)
| Table 1 |
| Reply Code (AJ45) | Reply |
| AB | FULL |
| AC | REDUCED |
ANCP*DVOLTAGE REDUCTION METHOD
THE MEANS USED TO REDUCE THE ELECTRICAL VOLTAGE.
Enter the applicable reply code from the table below
(ANCPDAE*;ANCPDAF$DAD*)
| Table 1 |
| Reply Code (AG91) | Reply |
| AE | AUTOTRANSFORMER |
| AF | REACTOR |
| AD | RESISTOR |
ANCQ*DFULL VOLTAGE RESTORING METHOD
THE MEANS USED TO RESTORE THE ITEM TO ITS FULL VOLTAGE.
Enter the applicable reply code from the table below
(ANCQDAK*;ANCQDAJ$DAH*)
| Table 1 |
| Reply Code (AG91) | Reply |
| AG | COUNTER EMF ACCELERATION |
| AH | CURRENT LIMIT ACCELERATION |
| AK | MANUAL ACCELERATION |
| AJ | TIME LIMIT ACCELERATION |
ACYN*JAC VOLTAGE RATING
THE VALUE,OR RANGE OF VALUES,OF ROOT MEAN SQUARE POTENTIAL FOR WHICH THE ITEM IS RATED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACYNJKC2.0*;ACYNJKC2.0$$JKC2.1*)
| Table 1 |
| Reply Code (AB63) | Reply |
| K | KILOVOLTS |
| V | VOLTS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ACZB*JFREQUENCY RATING
THE NUMBER OF COMPLETE CYCLIC CHANGES,PER UNIT OF TIME,FOR WHICH AN ITEM IS RATED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACZBJKA2.0*;ACZBJKA2.0$$JKA2.1*)
| Table 1 |
| Reply Code (AC32) | Reply |
| G | GIGAHERTZ |
| E | HERTZ |
| K | KILOHERTZ |
| M | MEGAHERTZ |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
FAAZ*DPHASE
THE NUMBER OF ALTERNATING CURRENT PHASES.
Enter the applicable reply code from the table below
(FAAZDA*;FAAZDC$DB*;FAAZDC$$DB*)
| Table 1 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| C | THREE |
| B | TWO |
ANRH*BAMP SIZE RATING
THE AMPERE SIZE DESIGNATION FOR SPECIAL DESIGN TYPE ITEMS WHICH ARE RATED IN AMPERE SIZE RATHER THAN HORSEPOWER.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ANRHB2.0*;ANRHB2.0$$BM2.0*)
ANCYBHORSEPOWER RATING
AN INDICATION OF THE RATED HORSEPOWER OF THE ITEM.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ANCYB2.0*;ANCYB2.0$$BM2.0*)
IF STYLE/REPLY CODE(s) AFC WERE ENTERED FOR MRC CBBL, YOU MUST ANSWER MRC (AGUE and ANDG)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDFUF*;CBBLDAFC$DBDT*;CBBLDAFC$$DBDT*)
| Table 1 |
| Reply Code (AN47) | Reply |
| FUE | ACCESSORY LOCATION EXTERNAL |
| FUF | ACCESSORY LOCATION INTERNAL |
| AFC | CIRCUIT PROTECTION FUSE |
| AAK | ELECTROSTATIC DISCHARGE CAPABILITY |
| BSZ | ELECTROSTATIC SENSITIVE |
| BDT | ELECTROSTATIC SHIELD |
| BWW | REVERSIBLE |
| FNY | ROHS DIRECTIVE COMPLIANCE |
AGUE*AFUSE ACCOMMODATION QUANTITY
THE NUMBER OF FUSES THE ITEM IS DESIGNED TO ACCOMMODATE /INCLUDING SPARES/.
Enter the numeric reply with a minimum of one digit.
(AGUEA10*)
ANDG*BFUSE CURRENT RATING IN AMPS
THE VALUE OF CURRENT FOR WHICH THE FUSE IS RATED,EXPRESSED IN AMPERES.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ANDGB2.0*;ANDGB2.0$$BM2.0*)
AQZFDCONTROL TYPE
INDICATES THE TYPE OF CONTROL.
Enter the applicable reply code from the table below
(AQZFDACK*;AQZFDAAY$$DACK*)
| Table 1 |
| Reply Code (AL37) | Reply |
| ACK | LOCAL |
| AAY | REMOTE |
IF STYLE/REPLY CODE(s) CE WERE ENTERED FOR MRC AFLW, YOU MUST ANSWER MRC (ANDE)
AFLWDACTUATION METHOD
THE MEANS BY WHICH THE ITEM IS ACTUATED.
Enter the applicable reply code from the table below
(AFLWDCF)
| Table 1 |
| Reply Code (AC58) | Reply |
| CE | MAGNETIC |
| CF | MANUAL |
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC ANDE, YOU MUST ANSWER MRC (FREQ)
ANDE*JACTUATOR VOLTAGE
THE VOLTAGE REQUIRED TO ACTUATE THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ANDEJB2.0*;ANDEJB2.0$$JB2.1*)
| Table 1 |
| Reply Code (AB62) | Reply |
| B | AC |
| C | DC |
FREQ*BFREQUENCY IN HERTZ
THE CYCLES PER SECOND /HERTZ/ OF THE ALTERNATING CURRENT.
Enter a reply with a minimum of one digit on either side of the decimal point.
(FREQB2.0*;FREQB2.0$$BM2.0*)
AGLDDPERFORMANCE TYPE
INDICATES THE PERFORMANCE CAPABILITY OF THE ITEM OR COMPONENT.
Enter the applicable reply code from the table below
(AGLDDAX*;AGLDDAW$DAT*;AGLDDAW$$DAT*)
| Table 1 |
| Reply Code (AE89) | Reply |
| AT | AUTOMATIC |
| AW | MANUAL |
| AX | SEMIAUTOMATIC |
ANDW*DLOAD PROTECTION TYPE
INDICATES THE TYPE OF LOAD FOR WHICH THE ITEM IS PROTECTED.
Enter the applicable reply code from the table below
(ANDWDAP*;ANDWDAQ$DAE*;ANDWDAQ$$DAE*)
| Table 1 |
| Reply Code (AJ49) | Reply |
| AP | LOW OIL |
| AQ | OVER TEMPERATURE |
| AJ | OVERCURRENT |
| AB | OVERLOAD |
| AC | SHORT CIRCUIT |
| AD | UNDERVOLTAGE |
| AE | UNDERVOLTAGE RELEASE |
| AF | UNDERVOLTAGE RELEASE EFFECT |
AKPSDDUTY CYCLE
THE WORKING PERIOD UNDER WHICH THE ITEM WAS DESIGNED TO OPERATE.
Enter the applicable reply code from the table below
(AKPSDAAF*;AKPSDAAD$DAAE*;AKPSDAAD$$DAAE*)
| Table 1 |
| Reply Code (AD63) | Reply |
| AAE | CONTINUOUS |
| AAF | INTERMITTENT |
| AAD | VARIABLE |
ANDXJAMBIENT TEMP
THE TEMPERATURE OF THE MEDIUM SURROUNDING AN ITEM AT WHICH IT CAN BE OPERATED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ANDXJF2.0*;ANDXJF2.0$$JF2.1*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
ABBB*DSPEED ADJUSTMENTS
THE DIFFERENT SPEEDS AT WHICH THE ITEM MAY BE OPERATED.
Enter the applicable reply code from the table below
(ABBBDA*;ABBBDB$DE*;ABBBDB$$DE*)
| Table 1 |
| Reply Code (AB03) | Reply |
| K | 0 TO FULL SPEED |
| E | FIVE SPEED |
| D | FOUR SPEED |
| A | SINGLE SPEED |
| C | THREE SPEED |
| B | TWO SPEED |
ABFEDHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION
THE SPECIFIC COMMERCIAL RATING WHICH CLASSES THE ITEM AS TO WHAT DEGREE THE ITEM WILL WITHSTAND ENVIRONMENTAL ELEMENTS AND/OR HAZARDOUS LOCATIONS.
Enter the applicable reply code from the table below
(ABFEDAV*;ABFEDCH$DBR*;ABFEDCH$$DBR*)
| Table 1 |
| Reply Code (AB27) | Reply |
| AA | ACID RESISTANT |
| FU | ACID/FUME RESISTANT - NEMA TYPE 11 |
| BM | BUREAU OF MINES EXPLOSION PROOF-NEMA TYPE 10 |
| CG | DRIPPROOF |
| FS | DRIPTIGHT |
| AC | DRIPTIGHT-NEMA TYPE 2 |
| CF | DUSTPROOF |
| AD | DUSTPROOF-NEMA TYPE 13 |
| DY | DUSTTIGHT |
| AE | DUSTTIGHT-NEMA TYPE 5 |
| CE | EXPLOSION PROOF |
| CH | FUNGUS RESISTANT |
| AP | GENERAL PURPOSE-NEMA TYPE 1 |
| AY | HAZARDOUS LOCATION, CLASS I, GROUP A, NEMA TYPE 7 |
| BC | HAZARDOUS LOCATION, CLASS I, GROUP A, NEMA TYPE 8 |
| AZ | HAZARDOUS LOCATION, CLASS I, GROUP B, NEMA TYPE 7 |
| BD | HAZARDOUS LOCATION, CLASS I, GROUP B, NEMA TYPE 8 |
| BA | HAZARDOUS LOCATION, CLASS I, GROUP C, NEMA TYPE 7 |
| BE | HAZARDOUS LOCATION, CLASS I, GROUP C, NEMA TYPE 8 |
| BB | HAZARDOUS LOCATION, CLASS I, GROUP D, NEMA TYPE 7 |
| BF | HAZARDOUS LOCATION, CLASS I, GROUP D, NEMA TYPE 8 |
| BG | HAZARDOUS LOCATION, CLASS II, GROUP E, NEMA TYPE 9 |
| BJ | HAZARDOUS LOCATION, CLASS II, GROUP G, NEMA TYPE 9 |
| BK | INDUSTRIAL USE-NEMA TYPE 12 |
| BR | MOISTURE RESISTANT |
| CJ | OILTIGHT |
| CK | RAINPROOF |
| EM | RAINTIGHT |
| AR | RAINTIGHT-NEMA TYPE 3R |
| GC | SALT SPRAY PROOF |
| EJ | SHOCK PROOF |
| CL | SPRAYTIGHT |
| DZ | SUBMERSIBLE |
| AS | SUBMERSIBLE-NEMA TYPE 6 |
| CM | WATERPROOF |
| CN | WATERTIGHT |
| AU | WATERTIGHT-NEMA TYPE 4 |
| DX | WEATHERPROOF |
| AV | WEATHERPROOF-NEMA TYPE 3 |
ANPZ*DENCLOSURE FEATURE
AN INDICATION OF THE FEATURE/S/ OF THE ENCLOSURE.
Enter the applicable reply code from the table below
(ANPZDAAC*;ANPZDAAL$$DAAQ*)
| Table 1 |
| Reply Code (AJ95) | Reply |
| ADD | AIRTIGHT |
| AAB | CARD CAGE |
| AAC | CLOSED FRAME |
| AAD | DRIPPROOF |
| ABJ | DUST TIGHT |
| ABK | DUST-IGNITION PROOF |
| AAE | DUSTPROOF |
| ADQ | ENCAPSULATED |
| AAF | ENCLOSED, VENTILATED ENCLOSURE |
| AAG | ENVIRONMENTAL PROOF |
| AAH | EXPLOSION PROOF |
| AAZ | FULLY ENCLOSED |
| ABN | FUNGUS PROOF |
| AAJ | FUNGUS RESISTANT |
| AFM | GENERAL PURPOSE |
| AAL | HERMETIC |
| AAK | HERMETICALLY SEALED |
| AAM | MOISTURE |
| ABT | MOISTURE PROOF |
| AAN | OILTIGHT |
| AAP | OPEN |
| AAQ | OPEN FRAME |
| ABA | PARTIALLY ENCLOSED |
| AAR | PROTECTED |
| AAS | RAINPROOF |
| ACJ | SPLASH PROOF |
| AAT | SPRAY TIGHT |
| ACK | SUBMERSIBLE |
| ACN | TOTALLY ENCLOSED |
| AAW | VENTILATED |
| AAY | WATERPROOF |
| AAX | WATERTIGHT |
| ABC | WEATHERPROOF |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAC2.0*;ABMKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAB2.0*;ABKWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALGC*GMOUNTING CONFIGURATION
THE PATTERN OR ARRANGEMENT THAT DESCRIBES THE MOUNTING CONFIGURATION OF THE ITEM.
Enter clear text.
(ALGCGCLEARTEXT)
ANRK*DSWITCH FUNCTIONAL POSITIONS
AN INDICATION OF THE VARIOUS FUNCTIONAL SWITCHING POSITIONS.
Enter the applicable reply code from the table below
(ANRKDADL*;ANRKDAES$$DACQ*)
| Table 1 |
| Reply Code (AK03) | Reply |
| AFA | 1 |
| AFB | 2 |
| AFC | 3 |
| AEE | AHEAD |
| AAB | AUTOMATIC |
| AFL | AUTOMATIC HS |
| AFM | AUTOMATIC LS |
| ADA | AUTOMATIC-HAND |
| ADD | AUTOMATIC-OFF-TEST |
| AED | BACK |
| ACH | BYPASS |
| ACJ | CLOSE |
| ADC | CONSTANT SPEED |
| AFP | DOWN |
| AAC | EMERGENCY |
| AFE | EMERGENCY LOWER |
| AAD | EMERGENCY RUN |
| AES | EMERGENCY START |
| ACK | EMERGENCY STOP |
| AET | EVER-RUN |
| AAE | FAST |
| AFG | FAST RESET EMERGENCY RUN |
| ACL | FAST START |
| AAF | FAST START EMERGENCY |
| ACG | FORWARD |
| AAG | FORWARD EMERGENCY |
| ADK | GO |
| AEF | HAND |
| ACC | HIGH |
| AAH | HIGH EMERGENCY RUN |
| AAJ | HIGH SPEED |
| ACN | HIGH SPEED RESET |
| ACQ | HIGH START |
| ADW | HIGH-LOW |
| AEG | HOIST |
| AEH | HS |
| ADS | INCH-DOWN |
| ADR | INCH-UP-STOP |
| ACW | IN-RISE |
| AEM | L1 |
| ADE | L2 |
| AEN | L3 |
| AAK | LOCK |
| ACS | LOW |
| AAL | LOW EMERGENCY RUN |
| AAN | LOW SPEED |
| ACP | LOW SPEED RESET |
| ACR | LOW START |
| AAM | LOWER |
| ACY | LOW-HIGH |
| AEL | LP |
| AEJ | LS |
| ADB | MAIN |
| AAP | MANUAL |
| AFJ | MANUAL HS |
| AFK | MANUAL LS |
| ACD | MEDIUM |
| AEX | MOTOR AND PUMP RM |
| ADL | NEON PILOT LITE |
| AEY | NO. 1 |
| AEQ | NO. 1 PUMP |
| AEZ | NO. 2 |
| AER | NO. 2 PUMP |
| ADG | NORMAL |
| AAQ | OFF |
| ADQ | OFF-STOP |
| AAR | ON |
| ADF | OPEN |
| ACX | OUT-DIVE |
| ACT | PAY OUT |
| AEK | PR |
| AAS | RAISE |
| AAT | REMOTE |
| ADH | REMOTE CONTROL OFF |
| ADJ | REMOTE CONTROL ON |
| AAW | RESET |
| ADX | RESET-OVERRUN |
| ADY | RESET-UNDERRUN |
| AEC | RESET-WAIT TWO MINUTES MOVE TO OFF |
| AAX | REST |
| AAY | REVERSE |
| AAZ | REVERSE EMERGENCY |
| ABA | RUN |
| ADP | SAFE-RUN |
| ABB | SEMI-AUTOMATIC |
| ABC | SLOW |
| AFF | SLOW RESET EMERGENCY RUN |
| ACM | SLOW START |
| ABD | SLOW START EMERGENCY |
| AFH | STANDBY |
| ABE | START |
| ACZ | START EMERGENCY RUN |
| ADN | START RUN |
| ABF | STOP |
| ADT | STOP-RUN |
| AEP | TD RESET |
| ADZ | TEST |
| ADM | TIME |
| AEB | TIMER RESET |
| AFD | TRIPPED |
| AFN | UP |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| CS | CONSTRUCTION |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| FN | FINISH |
| FM | FORM |
| FA | FORMULA |
| GR | GRADE |
| GP | GROUP |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| NR | NUMBER |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| QA | QUALITY |
| RN | RANGE |
| RT | RATING |
| RF | REFERENCE NUMBER |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDRTA000*;PRMTDPDA000$DAGA000*;PRMTDPDA000$$DAGA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJAGA000E2.0*;PMWTJAGA000E2.0$$JAGA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAUA0002.0*;PMLCJAUA0002.0$JAUA0002.0*;PMLCJAUA0002.0$$JAUA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information