An optical device for viewing something when visibility is limited. Includes fast optics to absorb weak optical images in low light and/or uses infrared and/or the thermal image spectrum to make something visible via an image converter. An IMAGE INTENSIFIER,NIGHT VISION and other items, such as an adapter for small arms, battery, cleaning material, cable, carrying case, and the like, may be included. See also VIEWER KIT,NIGHT VISION and CAMERA,INFRARED,INDUSTRIAL.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED51257*)
ALUMDVIEWER TYPE
INDICATES THE TYPE OF VIEWER.
Enter the applicable reply code from the table below
(ALUMDASL)
| Table 1 |
| Reply Code (AK95) | Reply |
| ASJ | BINOCULAR |
| AVR | CAMERA |
| ASE | EYEPIECE |
| ASK | MONOCULAR |
| ASL | TRINOCULAR |
ALUNDOPTRONIC DEVICE TYPE
INDICATES THE TYPE OF OPTRONIC DEVICE USED.
Enter the applicable reply code from the table below
(ALUNDAV)
| Table 1 |
| Reply Code (AD48) | Reply |
| AV | IMAGE INTENSIFIER |
| AG | INFRARED |
| AU | LIGHT AMPLIFIER |
| AP | THERMAL |
ALBYDUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter the applicable reply code from the table below
(ALBYDBUY*;ALBYDAKU$$DAJU*)
| Table 1 |
| Reply Code (AH21) | Reply |
| AKU | DETECTION |
| AJU | IDENTIFICATION |
| BUW | NIGHT VISION |
| BUY | NIGHT VISION MONOCULAR KIT |
| BUV | NIGHTTIME DRIVING |
| AJV | TACTICAL RECONNAISSANCE |
BHBPJVIEW ANGLE IN DEG
THE ANGLE OF VIEW,EXPRESSED IN DEGREES. PLEASE USE MRC VANG IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BHBPJAAD2.0*)
| Table 1 |
| Reply Code (AK33) | Reply |
| ADL | CONFIGURATED PLATE |
| ADM | CRIMPED SPIRAL |
| ADN | FLAT PLATE |
| AAD | HORIZONTAL |
| AAG | HORIZONTAL PLANE |
| ADH | INDIVIDUAL |
| ADJ | PARALLEL |
| ADK | SERIES |
| ADP | SMOOTH SPIRAL |
| ADB | TIMES 1 |
| ADC | TIMES 10 |
| ADD | TIMES 100 |
| ADE | TIMES 1000 |
| ADF | VARIABLE BIAS/OFFSET |
| AAF | VERTICAL |
| AAH | VERTICAL PLANE |
| ADG | VOLTAGE |
BCKTJHORIZONTAL REACH
A MEASUREMENT OF THE HORIZONTAL DISTANCE THAT THE ITEM CAN REACH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BCKTJM2.0*;BCKTJM2.0$$JM2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| K | KILOMETERS |
| M | METERS |
| L | MILLIMETERS |
BLPKDOPTICAL DEVICE TYPE
INDICATES THE TYPE OF OPTICAL DEVICE USED.
Enter the applicable reply code from the table below
(BLPKDBJ)
| Table 1 |
| Reply Code (AM07) | Reply |
| BJ | LENS |
| AK | PRISM |
BMMK*JWAVELENGTH RANGE
AN INDICATION OF THE WAVELENGTH MINIMUM AND MAXIMUM LIMITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(BMMKJLM32.0/P50.0*)
| Table 1 |
| Reply Code (AD75) | Reply |
| E | ANGSTROMS |
| C | MICROMETERS |
| M | MICRONS |
| L | MILLIMICRONS |
| N | NANOMETERS |
BCTD*DFOCUSING TYPE
INDICATES THE TYPE OF FOCUSING PROVIDED.
Enter the applicable reply code from the table below
(BCTDDAKT)
| Table 1 |
| Reply Code (AH21) | Reply |
| AKT | ADJUSTABLE |
| AKW | FIXED |
BPFW*AEYEPIECE QUANTITY
THE NUMBER OF EYEPIECE(S) PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BPFWA10*)
BLPM*JOBJECTIVE APERTURE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE OBJECTIVE APERTURE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BLPMJLC2.0*;BLPMJLC2.0$JLC2.0*;BLPMJLC2.0$$JLC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BLDD*GFIELD VIEW COVERAGE
THE FILM/AREA SIZE THAT THE LENS TRANSPOSES RELATIVE TO ITS FIELD OF VIEW COVERED.
Enter clear text.
(BLDDGCLEARTEXT)
BLPQ*DMAGNIFICATION TYPE
INDICATES THE TYPE OF MAGNIFICATION PROVIDED.
Enter the applicable reply code from the table below
(BLPQDF)
| Table 1 |
| Reply Code (AC01) | Reply |
| B | FIXED |
| F | VARIABLE |
BLPR*JMAGNIFICATION
THE POWER AND/OR AMOUNT OF APPARENT ENLARGEMENT BY AN OPTICAL DEVICE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(BLPRJA2*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKYD*GACCESSORY COMPONENTS AND QUANTITY
THE NAME AND NUMBER OF PARTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter clear text.
(AKYDGCLEARTEXT)
CYHE*JOPERATING TEMPERATURE RANGE
THE MINUS AND/OR PLUS DEGREES OF TEMPERATURE THE ITEM CAN WITHSTAND WITHOUT GIVING ERRONEOUS ASSAY DATA.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CYHEJFD2.0*)
| Table 1 |
| Reply Code (AB39) | Reply |
| K | DEG CELSIUS |
| L | DEG FAHRENHEIT |
| P | MILLIMETER PITCH |
| D | PER CENTIMETER |
| U | PER DECIMETER |
| E | PER FOOT |
| Q | PER FOOT IN INCHES |
| C | PER INCH |
| R | PER INCH OF INDICATION |
| T | PER KILOMETER |
| F | PER METER |
| S | PER METER IN MILLIMETERS |
| J | PER MILLIMETER |
| G | PER SQUARE CENTIMETER |
| M | PER SQUARE FOOT |
| A | PER SQUARE INCH |
| B | PER SQUARE METER |
| H | PER SQUARE MILLIMETER |
| N | PER SQUARE YARD |
| Table 2 |
| Reply Code (AH08) | Reply |
| M | MINUS |
| D | PLANO |
| P | PLUS |
CYEC*DINTERFACE TYPE
INDICATES THE TYPE OF INTERFACE(S) AVAILABLE FOR INPUT/OUTPUT COMMUNICATIONS.
Enter the applicable reply code from the table below
(CYECDJN)
| Table 1 |
| Reply Code (AE79) | Reply |
| JP | FIRE WIRE |
| HB | RJ45 |
| JN | USB |
AWZJ*DPOWER SOURCE
THE SOURCE OF POWER WHICH PROVIDES THE ENERGY REQUIRED FOR THE OPERATION OF THE ITEM.
Enter the applicable reply code from the table below
(AWZJDBJ)
| Table 1 |
| Reply Code (AG27) | Reply |
| BJ | EXTERNAL |
| BH | SELF-CONTAINED |
CSBH*JVOLTAGE IN VOLTS AND CURRENT TYPE
THE TOTAL ELECTRICAL VOLTAGE,EXPRESSED IN VOLTS,AND THE TYPE OF CURRENT WHETHER ALTERNATING OR DIRECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSBHJDC2.0*;CSBHJDC2.0$$JDC2.1*)
| Table 1 |
| Reply Code (AN87) | Reply |
| AC | AC |
| DC | DC |
AEXS*DBATTERY TYPE
INDICATES THE TYPE OF BATTERY(IES) USED.
Enter the applicable reply code from the table below
(AEXSDD)
| Table 1 |
| Reply Code (AD57) | Reply |
| B | DRY |
| C | WET |
ANLJ*BBATTERY VOLTAGE RATING IN VOLTS
THE ELECTRIC POTENTIAL THAT A BATTERY CAN PROVIDE,EXPRESSED IN VOLTS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ANLJB2.0)
AEXR*ABATTERY QUANTITY
THE NUMBER OF BATTERIES REQUIRED FOR OPERATION.
Enter the numeric reply with a minimum of one digit.
(AEXRA10*)
AMPS*BCURRENT RATING IN AMPS
THE ELECTRICAL CURRENT RATING,EXPRESSED IN AMPERES.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AMPSB2.0)
AFSS*JDESIGN CURRENT RATING IN AMPS
THE VALUE OF THE CURRENT FLOWING THROUGH THE ITEM WHEN OPERATED AT ITS DESIGNED VOLTAGE,EXPRESSED IN AMPERES.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFSSJB2.0*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AMNK*GSCALE CALIBRATION
AN INDICATION OF THE MANNER IN WHICH THE SCALE IS CALIBRATED.
Enter clear text.
(AMNKGCLEARTEXT)
AJWK*JWEIGHT
A RELATIVE MEASURE OF THE MASS OF AN ITEM WITH RESPECT TO ITS DENSITY.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJWKJGMB2.0*)
| Table 1 |
| Reply Code (AB16) | Reply |
| GM | GRAMS |
| KL | KILOGRAMS |
| OZ | OUNCES |
| LB | POUNDS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJLA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAB2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJLA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
RADC*DRADIOACTIVE CONTENT
AN INDICATION OF WHETHER OR NOT THE ITEM CONTAINS RADIOACTIVE MATERIALS.
Enter the applicable reply code from the table below
(RADCDP)
| Table 1 |
| Reply Code (AN54) | Reply |
| P | CONTAINS RADIOACTIVE MATERIAL |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDPTA000*;PRMTDPDA000$DAUA000*;PRMTDPDA000$$DAUA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDBEW)
| Table 1 |
| Reply Code (AN47) | Reply |
| ADK | CALIBRATED SCALE |
| CWF | CARRYING CASE WITH STRAP |
| ALC | COMMUNICATION CABLE |
| DZY | DAY/NIGHT VIEWFINDER |
| DPE | DIOPTER SCALE |
| FZL | GLOBAL POSITIONING SYSTEM |
| FZK | LASER POINTER |
| BEW | LENS PROTECTION DEVICE |
| DRB | LOCKING MECHANISM |
| AAJ | MOUNTING HARDWARE |
| CFW | NONGLARE GLASS |
| ALS | PROTECTIVE CAP |
| FZJ | RANGE FINDER |
| ASA | REMOTE CONTROL |
| EAB | RETICLE MOVEMENT |
| EAK | TRIPOD |
| EYE | TROCAR WITH HANDLE |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
AKVZ*JACCESSORY IDENTIFYING NUMBER
THE SPECIFIC NUMBER USED TO IDENTIFY THE ACCESSORY.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(AKVZJAL2.0*;AKVZJAL2.0$$JAL2.1*)
| Table 1 |
| Reply Code (AG99) | Reply |
| AL | CATALOG NO. |
| AB | DRAWING NO. |
| AC | MODEL NO. |
| AD | PART NO. |
| AE | SERIAL NO. |
| AG | SPECIFICATION NO. |
| AK | STYLE NO. |
| AF | TYPE NO. |
AJJX*DCOMPONENT DOCUMENT ORIGIN
THE ORIGINATOR /GOVERNMENTAL,INDUSTRIAL,OR OTHERWISE/ OF THE AVAILABLE DOCUMENT WHICH LISTS THE COMPONENT/S/ OF THE ITEM.
Enter the applicable reply code from the table below
(AJJXDAF)
| Table 1 |
| Reply Code (AF59) | Reply |
| AF | GOVERNMENT |
| AD | INDUSTRIAL |
AJJW*ACOMPONENT QUANTITY
THE NUMBER OF COMPONENTS INCLUDED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AJJWA10*)
AYDR*GDOCUMENT IDENTIFICATION
THE NUMBER OR SYMBOL/S/ USED TO IDENTIFY THE DOCUMENT.
Enter clear text.
(AYDRGCLEARTEXT)
AJJY*ADOCUMENT SOURCE
THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER SOURCE,WHICH CONTROLS THE DOCUMENT.
Enter the alpha-numeric reply with five character(s) exactly.
(AJJYAD5K7H)
AJJZ*DDOCUMENT TYPE
INDICATES THE TYPE OF DOCUMENT BY THE TITLE.
Enter the applicable reply code from the table below
(AJJZDCY)
| Table 1 |
| Reply Code (AF70) | Reply |
| ET | COMPLETE EQUIPMENT SCHEDULE |
| AN | ENGINEERING DRAWING |
| FC | EQUIPMENT CHECK LIST |
| BJ | INDUSTRIAL CATALOG |
| BK | INDUSTRIAL DRAWING |
| CP | LETTER |
| EW | MANUFACTURER BILL OF MATERIAL |
| EX | MATABW EQUIPMENT COMPONENT LIST |
| CV | MFR DRAWING |
| AC | MILITARY SPECIFICATION |
| BT | PARTS LIST |
| CY | PROCUREMENT PARTS LIST |
| CZ | PROCUREMENT SPECIFICATION |
| AH | SUPPLY CATALOG |
| AB | TECHNICAL MANUAL |
IF YOU ANSWER MRC AYDS, YOU MUST ANSWER MRC (AGAV)
AYDS*GEND ITEM NAME
THE APPROVED ITEM NAME OR PART NAME OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter clear text.
(AYDSGCLEARTEXT)
AFJH*GFURNISHED ITEMS
ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.
Enter clear text.
(AFJHGCLEARTEXT)
AMWN*AMODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(AMWNAD0)
AJKD*GNONSUPPLY ITEMS AND QUANTITIES
A LISTING OF THOSE MAJOR COMPONENTS,OUTSIDE THE SCOPE OF AN ITEM OF SUPPLY TO BE CATALOGED,AS INDICATED BY THE NAME OF THE MANUFACTURER,AND THE NAME AND NUMBER OF THE ITEM AS IDENTIFIED BY THE MANUFACTURER,AND THE NUMBER OF EACH.
Enter clear text.
(AJKDGCLEARTEXT)
AFJS*DPORTABILITY METHOD
THE MEANS,OTHER THAN A CARRYING CASE,PROVIDED FOR MOVEMENT OF THE ITEM.
Enter the applicable reply code from the table below
(AFJSDAE*;AFJSDAC$DAD*)
| Table 1 |
| Reply Code (AD28) | Reply |
| AC | BRAKE TYPE CASTERS |
| AE | FIXED EXTERNAL HANDLES |
| AJ | HAND STRAP |
| AF | HINGED EXTERNAL HANDLES |
| AD | NONBRAKE TYPE CASTERS |
| AG | RECESSED HANDLES |
| AK | SHOULDER STRAP |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJAUA000E2.0*;PMWTJAUA000E2.0$JAUA000E2.0*;PMWTJAUA000E2.0$$JAUA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
AFJQ*JSTORAGE TEMP RANGE
THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFJQJFM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
AJKC*GSUPPLY ITEMS AND QUANTITIES
A LISTING OF THOSE MAJOR COMPONENTS WHICH ARE COMPRISED OF A NATIONAL STOCK NUMBER,AN ITEM NAME,STANDARDIZED NAME,OR PART NAME,AND THE NUMBER OF EACH.
Enter clear text.
(AJKCGCLEARTEXT)
AGUC*AUNIT PACKAGE QUANTITY
THE NUMBER OF ITEMS CONTAINED IN THE UNIT PACKAGE.
Enter the numeric reply with a minimum of one digit.
(AGUCA10*)
AJAH*JUNPACKAGED UNIT HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAHJAC2.0*;AJAHJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJAF*JUNPACKAGED UNIT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING, IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAFJLC2.0*;AJAFJLC2.0$$JLC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CTJS*JUNPACKAGED UNIT WEIGHT
THE MEASURED WEIGHT OF AN ITEM UNENCUMERED BY PACKAGING OR PACKING MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTJSJKGA2.0*)
| Table 1 |
| Reply Code (AN75) | Reply |
| KG | KILOGRAMS |
| LB | POUNDS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
AJAG*JUNPACKAGED UNIT WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAGJLC2.0*;AJAGJLC2.0$$JLC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BPJZ*DUSAGE LOCATION
INDICATES THE LOCATION AT WHICH THE ITEM IS TO BE USED.
Enter the applicable reply code from the table below
(BPJZDDBA)
| Table 1 |
| Reply Code (AJ91) | Reply |
| DBA | COMMUNICATIONS ZONE |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information