An item consisting of a single, rigid or unrollable panel or several preformed sections (bow, center, stern). May include reinforcing strips.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED49416*)
AJJWACOMPONENT QUANTITY
THE NUMBER OF COMPONENTS INCLUDED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AJJWA10*)
AJJXDCOMPONENT DOCUMENT ORIGIN
THE ORIGINATOR /GOVERNMENTAL,INDUSTRIAL,OR OTHERWISE/ OF THE AVAILABLE DOCUMENT WHICH LISTS THE COMPONENT/S/ OF THE ITEM.
Enter the applicable reply code from the table below
(AJJXDAF)
| Table 1 |
| Reply Code (AF59) | Reply |
| AF | GOVERNMENT |
| AD | INDUSTRIAL |
AJJYADOCUMENT SOURCE
THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER SOURCE,WHICH CONTROLS THE DOCUMENT.
Enter the alpha-numeric reply with five character(s) exactly.
(AJJYAF2O5H)
IF YOU ANSWER MRC MATT, YOU MUST ANSWER MRC (MDCL)
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDAAA012*;MATTDPCBD00$DPCA000*;MATTDPCBD00$$DPCA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| PCA000 | PLASTIC |
| PCBD00 | PLASTIC VINYL CHLORIDE |
| AAA012 | THERMOPLASTIC |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
IF YOU ANSWER MRC SFTT, YOU MUST ANSWER MRC (STDC)
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDPNA000*;SFTTDANA000$DPNA000*;SFTTDANA000$$DPNA000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| ANA000 | ANODIZE |
| PNA000 | PAINT |
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable reply code from the table below
(ADZCDABX*;ADZCDABX$$DABX*)
| Table 1 |
| Reply Code (AA65) | Reply |
| ABX | ABRASION RESISTANT |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDGY0000*;HUESDBL0000$DGY0000*;HUESDBL0000$$DGY0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| BL0000 | BLACK |
| GY0000 | GRAY/GREY |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJLA2.0*;ABHPJLA2.0$$JLA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJLC2.0*;ABMKJLC2.0$$JLC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
AGUC*AUNIT PACKAGE QUANTITY
THE NUMBER OF ITEMS CONTAINED IN THE UNIT PACKAGE.
Enter the numeric reply with a minimum of one digit.
(AGUCA10*)
AKYD*GACCESSORY COMPONENTS AND QUANTITY
THE NAME AND NUMBER OF PARTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter clear text.
(AKYDGCLEARTEXT)
GRWT*JGROSS WEIGHT
THE COMBINED WEIGHT OF THE ITEM AND ITS LOADED CONTENTS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(GRWTJABHA2.0*;GRWTJABHA2.0$$JABHA2.1*)
| Table 1 |
| Reply Code (AD28) | Reply |
| CU | 1 HANDLE AT EACH END |
| DX | 1 HANDLE AT EACH SIDE |
| CW | 1 WEBBING LOOP EACH SIDE |
| CX | 1 WEBBING LOOP ON 4 CORNERS |
| DW | 2 HANDLES AT EACH END |
| CZ | 3 OBLONG METAL RINGS EITHER SIDE |
| CY | 3 WEBBING LOOPS EITHER SIDE |
| AV | AUTOMATIC DATA PROCESSING SERVER |
| CD | BAIL |
| CR | BAR |
| BW | BECKET |
| AB | BELT ATTACHMENTS |
| CF | BELT STRAP |
| AY | BOLT ON EAR |
| CJ | BOW |
| DY | BOW HANDLE |
| AC | BRAKE TYPE CASTERS |
| AA | CAMERA |
| CE | CASTERS |
| CM | CONTROL HEAD ASSEMBLY |
| AW | CRADLE |
| AX | DAVIT |
| CG | DETACHABLE SHOULDER STRAP |
| BU | DISPLAY UNIT |
| DS | D-RING |
| DP | D-RING W/TAB |
| DE | FIXED CASTERS |
| AE | FIXED EXTERNAL HANDLES |
| DJ | FIXED KNOB |
| AZ | FIXED LIFTING EARS ON CRADLE |
| DK | FIXED LOOP |
| EA | FOLD OVER HANDLE |
| DZ | FOLDING |
| BA | GRIPS |
| BB | GRIPS, FINGERHOLE |
| DC | HAND PUSHED |
| AJ | HAND STRAP |
| CP | HANDHOLES |
| BY | HANDLE |
| BD | HANDLE ON END |
| BE | HANDLE ON SIDE |
| BF | HANDLE ON TOP |
| AL | HANDLE, ADJUSTABLE |
| BH | HANDLE, EACH END, FOLDING |
| BL | HANDLE, EACH END, RING |
| BJ | HANDLE, FRONT, FOLDING |
| AM | HANDLE, NONADJUSTABLE |
| BK | HANDLE, PULL, REMOVABLE |
| BG | HANDLES, FLUSH FOLDING |
| BC | HANDLES, METAL |
| AF | HINGED EXTERNAL HANDLES |
| DT | HOOK |
| AN | KNOB |
| CB | L-HANDLE |
| CV | LIFTING CHAIN |
| BM | LIFTING EAR |
| AH | LIFTING EYES |
| BN | LIFTING FLANGE |
| BP | LIFTING LUGS |
| BX | LOOP |
| EH | LOW SLOPING TOP |
| DG | MANUAL |
| CH | NECK STRAP |
| AD | NONBRAKE TYPE CASTERS |
| DV | OPEN CONTOURED HANDLE |
| DU | OPEN FINGER GRIP |
| AR | PALLET |
| EJ | PALLET DOMESTIC, US NAVY |
| EK | PALLET FLEET, US NAVY |
| ED | PALLET, US AIR FORCE |
| EE | PALLET, US ARMY |
| EF | PALLET, US MARINE CORPS |
| EG | PALLET, US NAVY |
| DN | PISTOL GRIP |
| DH | POWER |
| CA | PULL RING |
| AS | PULL RING/TAB |
| DA | PUSHED |
| AG | RECESSED HANDLES |
| DL | REMOVABLE LOOP |
| CS | RETRACTABLE HANDLES |
| CL | ROD |
| BZ | ROPE |
| DD | SELF-PROPELLED |
| EB | SHIPPING CONTAINER |
| AK | SHOULDER STRAP |
| CN | SIDE DROP HANDLES |
| AP | SKID |
| DQ | SLIDE LOCK KEEPER |
| DM | SLIDING LOOP |
| AT | SLING |
| BQ | SLING, ENDLESS |
| BR | SNAP CATCH |
| EL | SNAP FASTENER |
| DR | SNAP HOOK |
| CK | STAFF |
| AU | STEERING FLANGE |
| BS | STRAP |
| BT | STRAP, NYLON WEB |
| DF | SWIVEL CASTERS |
| BV | TERMINAL |
| CC | T-HANDLE |
| DB | TOWED |
| CT | TRACKS |
| EC | W/HANDLES OR GRIPS |
| AQ | WHEELS |
| Table 2 |
| Reply Code (AG67) | Reply |
| HU | 120MIN/4.7GB |
| EU | 18MIN/150MB |
| EJ | 21MIN/180MB |
| HV | 240MIN/8.5GB |
| JU | 260MIN/9.4GB |
| GU | 30MIN/1.4GB |
| JV | 480MIN/17.1GB |
| GV | 60MIN/2.8GB |
| DV | 63MIN/550MB |
| DU | 74MIN/650MB |
| FV | 80MIN/700MB |
| GY | AWG |
| BF | BAG |
| BG | BALL |
| LM | BAR |
| HA | BARRELS |
| KB | BED |
| BH | BUNDLE |
| GP | BUSHELS |
| MT | BYTES |
| AB | CAPSULES |
| JJ | CARAT |
| KE | CARTRIDGES |
| KJ | CENTIGRADE |
| BS | CENTILITER |
| MP | CENTIMETER |
| BU | CENTIMETERS PER MINUTE |
| MU | CHARACTERS |
| GZ | CIR MIL |
| HE | CIRCULAR MIL |
| AC | CUBIC CENTIMETERS |
| MW | CUBIC CENTIMETERS PER MINUTE |
| BZ | CUBIC DECIMETERS |
| CY | CUBIC FEET |
| EM | CUBIC FEET PER HOUR |
| EK | CUBIC FEET PER MINUTE |
| CP | CUBIC INCHES |
| KV | CUBIC INCHES PER MINUTE |
| LD | CUBIC METERS |
| HD | CUBIC METERS PER MINUTE |
| MC | CUBIC METERS PER SECOND |
| CA | CUBIC MILLIMETERS |
| DR | CUBIC YARDS |
| HS | CUBIC YARDS PER MINUTE |
| DJ | CUPS |
| JF | CURIES |
| GL | DAYS |
| BW | DECANEWTON |
| CB | DECILITERS |
| GT | DEG CELSIUS |
| GW | DEG FAHRENHEIT |
| LU | DEG KELVIN |
| CE | DEGREES |
| JY | DENTAL FILM PACKET |
| DM | DIVISIONS PER INCH |
| MR | DOSES |
| BJ | DOZEN |
| CD | DRAMS |
| KU | DYNAMIC HOOK LOAD, POUNDS |
| HL | DYNES |
| KG | ENVELOPES PER HOUR |
| KH | ENVELOPES PER MINUTE |
| KK | FAHRENHEIT |
| BB | FEET |
| FE | FEET PER MINUTE |
| HH | FEET PER POUND |
| KL | FILM PACKET |
| JZ | FLASKS |
| AD | FLUID DRAMS |
| AE | FLUID OUNCES |
| GG | FOOT |
| BK | FOOT, ROLL |
| FK | GALLON, IMPERIAL MEASURE |
| FJ | GALLON, US MEASURE |
| AF | GALLONS |
| EV | GALLONS IMPERIAL MEASURE |
| GH | GALLONS PER DAY |
| HQ | GALLONS PER GALLON |
| LN | GALLONS PER HOUR |
| CQ | GALLONS PER MINUTE |
| FU | GALLONS US MEASURE |
| DX | GAUSS |
| MF | GIGABECQUERELS |
| ML | GIGABYTES |
| NC | GIGAOCTETS |
| EZ | GILLS |
| AG | GRAINS |
| JP | GRAINS PER INGOT |
| KW | GRAMMES PER CUBIC CENTIMETRE |
| BA | GRAMS |
| LX | GRAMS PER CUBIC CENTIMETER |
| FT | GRAMS PER LINEAR CENTIMETER |
| LC | GRAMS PER LINEAR METER |
| CF | GRAMS PER LITER |
| JT | GRAMS PER LITER OF SOLUTION |
| KR | GRAMS PER MILLIMETER |
| ES | GRAMS PER SQUARE METER |
| HT | HECTOBARS |
| CH | HECTOGRAMS |
| LW | HECTOPASCAL |
| FQ | HOURS |
| DS | HUNDREDTHS OF A FOOT |
| BC | INCHES |
| FR | INCHES OF MERCURY |
| FA | INCHES OF MERCURY ABSOLUTE PRESSURE |
| AU | INCHES PER MINUTE |
| MH | JAR |
| MM | KILOBYTES |
| DY | KILOGAUSS |
| AJ | KILOGRAMS |
| GS | KILOGRAMS OF WATER |
| HX | KILOGRAMS OF WATER PER HOUR |
| EH | KILOGRAMS PER 100 SQUARE METERS |
| MG | KILOGRAMS PER CUBIC DECIMETER |
| DB | KILOGRAMS PER CUBIC METER |
| JE | KILOGRAMS PER HECTARE |
| GQ | KILOGRAMS PER HOUR |
| CT | KILOGRAMS PER METER |
| CN | KILOGRAMS PER MILLIMETER |
| HB | KILOGRAMS PER MINUTE |
| EY | KILOGRAMS PER SQUARE CENTIMETER |
| KS | KILOGRAMS PER SQUARE CENTIMETER GAGE |
| CX | KILOGRAMS PER SQUARE METER |
| JA | KILOGRAMS PER SQUARE MILLIMETER |
| EA | KILOMAXWELLS |
| GM | KILOMETERS PER HOUR |
| LT | KILONEWTONS |
| LG | KILOPASCALS |
| MJ | KIT |
| GC | KNOTS |
| CC | LITERS |
| GK | LITERS PER DAY |
| GJ | LITERS PER HOUR |
| HR | LITERS PER LITER |
| CR | LITERS PER MINUTE |
| AH | LOZENGE |
| GB | MAN-HOURS |
| GA | MAN-MINUTES |
| HY | MANOMETRIC |
| DZ | MAXWELLS |
| LE | MEGABECQUERELS |
| MN | MEGABYTES |
| LJ | MEGAPASCALS |
| CK | METERS |
| KM | METERS PER KILOGRAM |
| FH | METERS PER MINUTE |
| CV | METERS PER SECOND |
| BX | METRIC TONS |
| FG | METRIC TONS PER HOUR |
| JH | MICROCURIES |
| AK | MICROGRAMS |
| HN | MICROLITERS |
| GD | MICRONS |
| CJ | MILE |
| GE | MILES PER HOUR |
| DN | MILES PER INCH |
| KN | MILLIBARS |
| JG | MILLICURIES |
| AL | MILLIGRAMS |
| JK | MILLIGRAMS PER CUBIC CENTIMETER |
| AM | MILLILITERS |
| LF | MILLILITERS PER GALLON |
| HG | MILLILITERS PER MINUTE |
| HC | MILLIMETERS |
| KZ | MILLIMETERS OF MERCURY |
| KX | MILLIVOLTS |
| DL | MILS |
| HP | MINIMS |
| DF | MINUTES |
| BT | NEWTON |
| LS | NEWTONS PER 10 MILLIMETERS WIDE |
| LP | NEWTONS PER 15 MILLIMETERS WIDE |
| LQ | NEWTONS PER 25 MILLIMETERS WIDE |
| LR | NEWTONS PER 50 MILLIMETERS WIDE |
| LH | NEWTONS PER MILLIMETER |
| JR | NEWTONS PER SQUARE CENTIMETER |
| LV | NEWTONS PER SQUARE MILLIMETER |
| EB | OERSTEDS |
| MQ | OIL FLOW RATE |
| AN | OUNCES |
| KQ | OUNCES PER INCH |
| FS | OUNCES PER LINEAR FOOT |
| LB | OUNCES PER LINEAR YARD |
| MK | OUNCES PER SECOND |
| EX | OUNCES PER SQUARE FOOT |
| KY | OUNCES PER SQUARE INCH |
| ER | OUNCES PER SQUARE YARD |
| DG | OUNCES, AVOIRDUPOIS |
| DH | OUNCES, FLUID |
| KT | OUNCES, TROY |
| BL | PACK, FOIL |
| BM | PACKET |
| MX | PAD |
| DP | PARTS PER INCH |
| KC | PATIENT |
| FX | PECK |
| AP | PELLETS |
| JL | PENNYWEIGHT |
| JQ | PENNYWEIGHT PER PLATE |
| FZ | PER CYCLE |
| FY | PER HOUR |
| ET | PER INCH OF LENGTH |
| JC | PER KILOGRAM |
| EW | PER MILLIMETER OF LENGTH |
| MV | PER MINUTE |
| JB | PER POUND |
| MD | PER SQUARE INCH |
| ME | PER SQUARE METER |
| CG | PERCENT |
| EE | PERCENT PER DEG CELSIUS |
| EF | PERCENT PER DEG FAHRENHEIT |
| AQ | PILLS |
| FM | PINT, IMPERIAL MEASURE |
| FL | PINT, US MEASURE |
| AR | PINTS |
| JW | POLLEN UNITS |
| KA | PORTIONS |
| AS | POUNDS |
| GR | POUNDS OF WATER |
| HW | POUNDS OF WATER PER HOUR |
| EG | POUNDS PER 100 SQUARE FEET |
| JD | POUNDS PER ACRE |
| DA | POUNDS PER CUBIC FOOT |
| EN | POUNDS PER DAY |
| CZ | POUNDS PER FOOT |
| EP | POUNDS PER HOUR |
| CM | POUNDS PER INCH |
| EC | POUNDS PER MINUTE |
| CW | POUNDS PER SQUARE FOOT |
| FB | POUNDS PER SQUARE INCH |
| LZ | POUNDS PER SQUARE INCH ABSOLUTE |
| MA | POUNDS PER SQUARE INCH DIFFERENTIAL |
| JS | POUNDS PER SQUARE INCH GAGE |
| MB | POUNDS PER SQUARE INCH VACUUM |
| ED | POUNDS PER SQUARE YARD |
| CS | POUNDS PER YARD |
| JX | PROTEIN NITROGEN UNITS |
| FP | QUART, IMPERIAL MEASURE |
| FN | QUART, US MEASURE |
| AT | QUARTS |
| HF | QUARTS PER HOUR |
| JM | RECIPROCAL ERGS PER SQ CM |
| JN | RECIPROCAL ROENTGENS |
| FC | REVOLUTIONS PER MINUTE |
| FD | REVOLUTIONS PER SECOND |
| BN | ROLL |
| DK | SECONDS |
| BD | SHEET |
| HM | SHEETS |
| KP | SPONGE |
| DE | SQUARE CENTIMETERS |
| DQ | SQUARE FEET |
| DD | SQUARE INCHES |
| HJ | SQUARE INCHES PER POUND |
| EL | SQUARE METERS |
| GN | SQUARE MILLIMETERS |
| HK | SQUARE MILLIMETERS PER KILOGRAM |
| AV | STRIP |
| AW | SUPPOSITORIES |
| BP | SWAB |
| LK | TABLESPOON |
| AX | TABLETS |
| MY | TABS |
| GF | TANK |
| LL | TEASPOON |
| CU | TERABYTES |
| LY | TESTS |
| DT | THOUSANDTHS OF A FOOT |
| DW | THOUSANDTHS OF A METER |
| BY | TONS |
| EQ | TONS PER DAY |
| FF | TONS PER HOUR |
| NB | TORR |
| BQ | TRAY |
| AY | TROCHE |
| KD | TROOP |
| KF | TUBES |
| CL | TURNS |
| AZ | UNITS |
| MS | US TEST UNITS |
| BV | USP UNITS |
| NA | VOLT |
| MZ | VOLTAGE DIRECT CURRENT |
| HZ | VOLUMETRIC |
| LA | WEBERS PER SQUARE METER |
| BR | YARD, ROLL |
| BE | YARDS |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
CYHX*AVEHICLE DESIGN CONTROL ACTIVITY
THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER ENTITY,WHICH CONTROLS THE DESIGN OF THE VEHICLE.
Enter the alpha-numeric reply with five character(s) exactly.
(CYHXAC0X7B)
CYHY*AVEHICLE IDENTIFICATION DESIGNATOR
THE NAME OR COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH IDENTIFY THE SPECIFIC VEHICLE.
Enter the alpha-numeric reply with a minimum of one character.
(CYHYAE7)
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJLB2.0*;ADAVJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJZ*DDOCUMENT TYPE
INDICATES THE TYPE OF DOCUMENT BY THE TITLE.
Enter the applicable reply code from the table below
(AJJZDBD)
| Table 1 |
| Reply Code (AF70) | Reply |
| BD | BILL OF MATERIAL |
| BE | CATALOG SHEET |
| CD | COMMERCIAL CATALOG |
| CH | DESIGN CONTROL DRAWING |
| AN | ENGINEERING DRAWING |
| BG | ENGINEERING PARTS LIST |
| CF | FEDERAL SUPPLY CATALOG |
| BK | INDUSTRIAL DRAWING |
| BL | MAINTENANCE PARTS LIST |
| CV | MFR DRAWING |
| BN | MILITARY DRAWING |
| CU | PACKAGE LIST |
| BS | PARTS CATALOG |
| BT | PARTS LIST |
| CY | PROCUREMENT PARTS LIST |
| FE | SOURCE CONTROL DRAWING |
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information