A device designed to be used for controlled inflation of dilation balloons. Item is used with a standard disposable syringe (not included).

FSC Information

6515	Medical and Surgical Instruments, Equipment, and Supplies

Colloquial Information

No Colloquials assigned to this Approve Item Name at this time

Change List

MRC AFJJ has been deleted

MRC AFJK has been deleted

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED45899*)

ANEHDDESIGN DESIGNATION

THE DESIGNATION DERIVED FROM THE NAME OF THE DESIGNER OR USE FOR WHICH THE ITEM IS INTENDED.

Enter the applicable reply code from the table below

(ANEHDGVV*;ANEHDFGQ$DAAT*;ANEHDFGQ$$DAAT*)

Table 1
	Reply Code (AJ50)	Reply
	AAB	ABBOTT-RAWSON
	AAC	ABDOMINAL
	GHC	ABRAMSON-TRIPLE LUMEN SUMP DRAIN
	GNP	AIRLIFE
	AAD	ALCOCK
	GGV	AMPLAZT
	ECF	ANDERSON
	GVQ	ANGIOCATH
	GVR	ANGIOPLASTY
	AAE	ANGLE
	AJW	AORTIC
	AJY	AORTOGRAM
	ECG	ARGYLE
	HFL	ARMSTRONG
	GVS	ARTERIAL AND VENOUS PROSTHESIS
	EBL	ASPIRATING
	GVT	BALLOON WEDGE PRESSURE
	AAF	BARDAM-TIEMANN
	GJA	BARON
	HAG	BERENSTEIN
	HCN	BIONIT II
	AAG	BLASUCCI
	AAH	BRAASCH
	GHD	BRACHIAL ARTERY
	GHE	BRACHIAL CORONARY
	AAJ	BREWER
	HAH	BROCKENBROUGH
	GVU	BROCKENBROUGH-TRANSSEPTAL
	EBM	BRONCHI MUCUS
	HEH	BRONCHO-CATH
	AAK	CANTOR
	GNE	CARLENS
	AAL	CARSON
	AAM	CATTELL
	GVV	CHOLANGIOGRAPHY
	GVW	COBRA
	AAN	COLON IRRIGATION
	AJJ	CONTINUOUS IRRIGATION HEMOSTATIC
	GVX	COOK UROLOGICAL
	BZM	COOLEY
	AAR	COUDE
	BZR	COUNCIL
	AAS	CUMMINGS
	HBM	DAVOL CATTELL "T"
	AAW	DE LEE
	AAT	DEAVER
	HAJ	DEKNATEL
	HAK	DELMED
	AJZ	DENNIS
	AKD	DIGI-TROL SUCTION
	CYX	DONALDSON
	HAL	DOTTER
	AAX	DOURMASKIN
	HAZ	DOWD
	GJB	DUCOR ANGIOGRAPHY
	GNF	EDSLAB
	ECH	EMMETT
	AAY	EMPYEMA
	GNQ	ENDOBRONCHIAL
	AAZ	ENDOTRACHEAL
	GVY	ENDOTROL
	ABA	EUSTACHIAN
	GHF	FEMORAL APPROACH
	AKE	FEMORAL-CEREBRAL
	GVZ	FEMORAL-LEFT CORONARY-A
	GWA	FEMORAL-VENTRICULAR
	ALK	FEMORAL-VISCERAL
	GFH	FOGARTY
	ABB	FOLEY
	CCN	FRAZIER
	ABC	FREYER
	ABD	GARCEAU
	ALQ	GASTRIC LAVAGE
	ECJ	GASTRIC SUMP
	ABE	GILBERT
	GHG	GOODALE-LUBIN
	HAD	GOTTSCHALK
	ALW	GROLLMAN
	GFJ	GRUNTZIG
	CEK	HARRIS
	ABF	HARTMANN
	ALZ	HEADHUNTER
	GNR	HILAL
	GNS	HILAL MODIFIED HEADHUNTER
	GNT	HOUSEPIAN
	ABH	HURWITZ
	ABG	HYAMS
	GFK	HYSTERECTOMY
	ABJ	INTRAVENOUS
	HAM	INTUBATION
	FGQ	IRRIGATION
	HNZ	JACKSON-PRATT
	EQU	JAVID
	GJD	JELCO
	BSP	JOHNSON
	AMA	JUDKINS
	AMB	JUDKINS FEMORAL
	ECK	KASLOW
	GWB	KMVAC-SUCTION
	ECL	LAHEY T DRAIN
	CVS	LARYNX
	CVT	LASER-FLEX
	ABK	LE FORT
	GHH	LEFT ANTERIOR
	GHJ	LEFT CORONARY
	GNG	LEFT ENDOBRONCHIAL TUBE
	GJE	LEFT MAINSTEM BRONCHUS
	AMJ	LEFT VENTRICLE
	ECM	LEONARD
	ABL	LESSER
	ACQ	LEVIN
	CVU	LGT LARYNGECTOMY
	ABM	LOCALIO
	AMR	LONGDWEL
	ABN	MAGILL
	ABP	MALECOT
	GNU	MANI
	ABQ	MCIVER
	HAY	MENTOR-SELFCATH
	GWC	MENTOR-URO-SAN
	ABR	MERCIER
	GNV	MIKAELSSON
	ABS	MILLER-ABBOTT
	GWD	MILL-ROSE
	EBN	MORRIS
	GJF	MULTIPURPOSE
	ABT	MURPHY
	ABW	NASAL
	AMX	NASHVILLE FISTULA CATHETER
	AMY	NASOGASTRIC DRAINAGE
	ECN	NASOGASTRIC SUCTION
	GGP	NATIONAL INSTITUTE OF HEALTH
	ABX	NELATON
	HBA	OLBERT
	EPC	OPHTHALMIC
	EBP	ORAL
	GJG	OTOLOGY
	ECP	OWENS
	GWE	PACKING
	HFM	PAPARELLA
	ABY	PENROSE
	ABZ	PERITONEAL
	ACA	PEZZER
	ACB	PHILIPS
	GWF	POLLACK
	CMB	POOLE
	ECQ	PORTEX EPIDURAL
	EBQ	POST OPERATIVE SUMP DRAIN
	HAX	PROFILE PLUS
	GJH	RAE
	DVP	RAMP
	ACC	REHFUSS
	HAN	RENAL-FASIAL DILATION
	HFN	REUTER
	GHK	RIGHT CORONARY
	GJJ	RIGHT MAINSTEM BRONCHUS
	ACD	ROBINSON
	ACE	ROB-NEL
	GJK	ROSEN
	AMZ	SALEM
	ECR	SARATOGA SUMP DRAIN
	HAP	SCHOONMAKER TECHNIQUE
	HFP	SHAH
	HFQ	SHEEHY
	HFR	SHEPARD
	ECS	SHERIDAN-SALEM SUMP DRAIN
	ECT	SHIRLEY
	GWG	SIMMONS
	EBR	SOANES
	HAQ	SORENSON
	GBR	SPACE OPERATIONS, BASIC
	ACF	STOMACH
	ECW	SUCTION
	HAR	SYNDER HEMOVAC
	GWH	THERMODILUTION
	ACG	THORACIC
	CYC	TIEMAN
	ANC	TIEMANN
	GWJ	TORCON
	GBP	TRACHEAL
	HFS	T-TUBE
	ACH	TUOHY
	HFT	UMBRELLA
	ANE	URINARY DRAINAGE
	ACJ	VALENTINE
	HBR	VAN ANDEL
	ACK	VAN BUREN
	AMQ	VENA CAVA
	ACL	VIRDEN
	GWK	VISCERAL
	ACM	WANGENSTEEN
	ACN	WEBER
	CSW	WHEELER
	ESV	WILLIAM HOUSE
	ACP	WISHARD
	ECX	WOLF
	GNW	WOUND DRAINAGE
	DBJ	YANKAUER

STYLLSTYLE DESIGNATOR

THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.

Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.

(STYLLF1)

Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
DQ00458	F1	INFLATION PISTOL

AGYS*JTUBE INSIDE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE TUBE,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AGYSJA2.0*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

BNJL*JTUBE OVERALL LENGTH

A MEASUREMENT OF THE LONGEST DIMENSION OF THE TUBE,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BNJLJAA2.0*;BNJLJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	C	CENTIMETERS
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BBYQ*JTUBE OUTSIDE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE TUBE,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BBYQJAA2.0*;BBYQJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ANER*ASHAFT EYE QUANTITY

THE NUMBER OF OPENINGS ALONG THE SIDE OF THE SHAFT DESIGNED FOR DRAINAGE,IRRIGATION,OR INOCULATION.

Enter the numeric reply with a minimum of one digit.

(ANERA10*)

ANES*JBALLOON CAPACITY

THE RATED AIR/FLUID VOLUME OF THE BALLOON.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ANESJAE2.0*)

Table 1
	Reply Code (AG67)	Reply
	AC	CUBIC CENTIMETERS
	AE	FLUID OUNCES
	AM	MILLILITERS

ANFC*DINFLATION DEVICE

THE DEVICE USED TO PERMIT INJECTION OF AIR OR FLUID INTO THE ITEM.

Enter the applicable reply code from the table below

(ANFCDAE*;ANFCDL$DS*;ANFCDL$$DS*)

Table 1
	Reply Code (AE34)	Reply
	S	PILOT BALLOON
	AE	SELF-RETAINING
	K	SELF-SEALING PLUG
	AD	SELF-SEALING VALVE
	J	VALVE
	L	VALVE PLUG

ANEP*AFLANGED WING QUANTITY

THE NUMBER OF FLANGED WINGS PROVIDED.

Enter the numeric reply with a minimum of one digit.

(ANEPA10*)

ANFGDTIP TYPE

INDICATES THE TYPE OF TIP PROVIDED.

Enter the applicable reply code from the table below

(ANFGDAFC*;ANFGDAAI$DAAG*;ANFGDAAI$$DAAG*)

Table 1
	Reply Code (AJ55)	Reply
	AFD	3-POSITION
	AGK	ABRUPT ANGLE CURVE
	AGE	ANGULAR
	AGV	ATRAUMATIC
	AFJ	BALLOON
	AER	BEVELED
	ACR	BLUNT
	AAB	BUCKET
	ACM	BULBOUS
	AAC	CLOSED
	AHY	COBRA
	AES	CONE
	AAD	COUDE
	AFK	CURVED
	AGF	DOUBLE LUER LOCK HUB
	AGL	EXTRA SHORT
	AAE	FILIFORM
	AET	FINE TAPER
	AEK	FLEXIBLE
	AEW	FORKED
	AEX	HOLLOW REINFORCED
	AEY	HOLLOW ROUND
	AHC	MOLDED
	AGM	MOLDED ATRAUMATIC
	AEZ	MOLDED MICROTAPER
	AFL	MULTIPLE CURVED
	AAG	MUSHROOM
	AGS	NON-TAPERED
	AAH	OBLIQUE
	AAJ	OLIVARY
	AAK	OPEN END
	AFA	OPEN HEAD
	ABL	PERFORATED
	AFB	PERFORATED METAL
	AFM	PIGTAIL
	AGJ	PIGTAIL, DOUBLE
	AAL	POINTED
	AEJ	REINFORCED
	AAP	ROUND
	AGN	SHORT
	AGP	SLIGHT CURVED
	AGQ	SMOOTH
	AFN	SOLID ROUND
	AAF	SPIRAL FILIFORM
	ABC	STRAIGHT
	AEA	TAPERED
	AAM	TEE
	AAN	THREADED
	AGD	WEDGE
	AFC	WEIGHTED
	AAQ	WHISTLE

ANFJ*DCONNECTOR TYPE

INDICATES THE TYPE OF CONNECTOR PROVIDED.

Enter the applicable reply code from the table below

(ANFJDAKS*;ANFJDAAB$DAKR*)

Table 1
	Reply Code (AJ57)	Reply
	AKP	BEVELED INTEGRAL CONNECTOR
	AAV	CONE-SHAPED
	AKR	EPOXY SEALED HUB
	AJS	FEMALE LUER LOCK
	ANV	FEMALE LUER SLIP
	AKQ	FEMALE LUER-HUB
	ANT	FEMALE TO MALE LUER LOCK
	AAB	FINGER VALVE
	AKS	FLEXIBLE
	AKT	LUER END
	AJW	LUER LOCK
	AAC	LUER LOCK HUB
	AJY	LUER SLIP HUB
	AKA	MALE LUER LOCK
	ANU	MALE TO MALE LUER LOCK
	AAD	SLIP HUB
	AKW	TAPERED
	AKX	TAPERED FORCE-FIT
	AFC	UNIVERSAL
	AAE	Y-CONNECTOR

ANFM*DSTOMACH TUBE BULB TYPE

INDICATES THE TYPE OF BULB USED AS AN AID TO PREVENT CLOGGING OF THE STOMACH TUBE.

Enter the applicable reply code from the table below

(ANFMDAB*;ANFMDAC$DAB*)

Table 1
	Reply Code (AJ58)	Reply
	AB	MERCURY WEIGHTED
	AC	SUCTION

ANFSDCORE FABRICATION METHOD

THE MEANS USED TO FABRICATE THE CORE.

Enter the applicable reply code from the table below

(ANFSDAW)

Table 1
	Reply Code (AA62)	Reply
	DY	NOT WOVEN
	AW	WOVEN

ANFY*DPATIENT SIZE DESIGNATION

THE NONNUMERIC DESIGNATION STANDARDIZED ON AGE,SEX,AND SIZE AS RELATING TO BODY PROPORTIONMENTS.

Enter the applicable reply code from the table below

(ANFYDAC*;ANFYDAK$$DAN*)

Table 1
	Reply Code (AJ60)	Reply
	AB	ADULT
	AC	CHILD
	AD	FEMALE
	AX	GERIATRIC-SMALL
	AE	INFANT
	AV	JUNIOR TO SMALL
	AS	LARGE
	AT	LARGE TO MEDIUM
	AF	MALE
	AR	MEDIUM
	AU	MEDIUM TO SMALL
	AN	NEWBORN
	AK	PREMATURE INFANT
	AQ	SMALL
	AL	SMALL ADULT
	AM	UNIVERSAL
	AW	X-LARGE

AGUC*AUNIT PACKAGE QUANTITY

THE NUMBER OF ITEMS CONTAINED IN THE UNIT PACKAGE.

Enter the numeric reply with a minimum of one digit.

(AGUCA10*)

CBBL*DFEATURES PROVIDED

THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.

Enter the applicable reply code from the table below

(CBBLDEJB*;CBBLDBUV$$DBVL*)

Table 1
	Reply Code (AN47)	Reply
	EBX	ADHESIVE COATING
	EJR	BUILT-IN STANDARD 15MM CONNECTOR
	EJS	CAP FLOW CONTROL DEVICE
	EJT	CLAMP FLOW CONTROL DEVICE
	CRW	CLEAR
	BUV	CONDUCTIVE
	EJU	DEPTH GRADUATION MARKINGS
	AQE	DISPOSABLE
	CZW	FLEXIBLE
	BVL	NONCONDUCTIVE
	AQP	NONSTERILE
	EHU	OBTURATOR
	EJV	PLUG FLOW CONTROL DEVICE
	BZU	PRESSURE SENSITIVE ADHESIVE TAPE
	EYD	PULL TIE
	AQS	REUSABLE
	FCE	SELF-ADHESIVE
	AFM	STERILE
	EJB	STYLET
	EJW	TROCAR
	EJX	X-RAY OPACITY

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZW*GDEPARTURE FROM CITED DOCUMENT

THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.

Enter the reply in clear text.

(ZZZWGAS MODIFIED BY MATERIAL*)

ZZZX*GDEPARTURE FROM CITED DESIGNATOR

THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.

Enter the reply in clear text.

(ZZZXGAS MODIFIED BY MATERIAL*)

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION

A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.

Enter the Reply Code from the table below.

(ELCDDA*)

Table 1
	Reply Code (AN58)	Reply
	A	ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD

AFJQ*JSTORAGE TEMP RANGE

THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.

(AFJQJFM32.0/P50.0*)

Table 1
	Reply Code (AB36)	Reply
	C	CELSIUS
	F	FAHRENHEIT

ANGP*DSPECIAL GRADUATIONS

THE SPECIAL SCALE OR INCREMENT MARKINGS INCLUDED ON THE ITEM.

Enter the applicable reply code from the table below

(ANGPDTB*;ANGPDCD$$DCC*)

Table 1
	Reply Code (AB44)	Reply
	CA	MARKED AT 1, 5, 25 CM
	CC	MARKED AT 10, 20, 30 IN.
	CB	MARKED AT 16, 27, 31 IN.
	TB	MARKED AT 18, 22, 26, 30 IN.
	CD	MARKED AT 20 IN.
	TC	MARKED AT 5 IN.