An item consisting of one or two narrow strips of material cut to a definite length, having one end processed with a fastening device. The other end is processed to mate with the fastening end. It is intended for the atachment of watches, compasses, depth gauges, and the like. The item may be nonmagnetic.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED41828*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3DRUDRCC000*;MATT3DRUDRCC000$DPCAJ00*;MATT3DRUDRCC000$$DPCAJ00*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRU | BUCKLE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3HTI | END CLIP |
| Table 2 |
| Reply Code (MA01) | Reply |
| LRA000 | LEATHER |
| FBB000 | NYLON |
| PCA000 | PLASTIC |
| PCP000 | PLASTIC POLYAMIDE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE |
| PCDA01 | POLYAMIDE NYLON |
| RCC000 | RUBBER SILICONE |
| RCB000 | RUBBER SYNTHETIC |
| SLC000 | SILICON |
| STB000 | STEEL CORROSION RESISTING |
| TTB000 | TITANIUM |
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable reply code from the table below
(ADZCDJE*;ADZCDDZ$DME*;ADZCDDZ$$DME*)
| Table 1 |
| Reply Code (AA65) | Reply |
| AA | ABRASION RESISTANT |
| GG | ACCELERATED AGING RESISTANT |
| AB | ACID RESISTANT |
| FR | AGE RESISTANT |
| A | ANY ACCEPTABLE |
| BB | FIRE RESISTANT |
| JE | FLAME RESISTANT |
| KH | FLAME RETARDANT |
| KP | FLAMEPROOF |
| GP | FUNGUS RESISTANT |
| CY | HEAT RESISTANT |
| AG | INCOMBUSTIBLE |
| XQ | INHERENTLY REPELLENT |
| LS | LATEX IMPREGNATED |
| KK | LIGHT RESISTANT |
| MP | MILDEW PROOFED |
| AJ | MILDEW RESISTANT |
| GT | MOISTURE RESISTANT |
| MR | MOLD RESISTANT |
| ME | NONTOXIC |
| KQ | OIL TREATED |
| MF | RESIN |
| MH | RESIN IMPREGNATED RESISTANT |
| JT | SCRUB RESISTANT |
| MK | SYNTHETIC RUBBER IMPREGNATED |
| MJ | ULTRAVIOLET RESISTANT |
| DZ | WATER REPELLENT |
| BS | WATER RESISTANT |
| BT | WEATHER RESISTANT |
ABRYJLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAA2.0*;ABRYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGLJWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJAB2.0*;ABGLJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDGR0137*;HUESDGY0047$DGR0024*;HUESDGY0047$$DGR0024*)
| Table 1 |
| Reply Code (AD06) | Reply |
| A | ANY ACCEPTABLE |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BL0039 | BLACK, LUSTERLESS |
| BU0000 | BLUE |
| BU0088 | BLUE, FED STD 595, 15123 |
| BU0033 | BLUE, NAVY |
| BR0000 | BROWN |
| BR0173 | BROWN, FED STD 595, 30279 |
| GL0000 | GOLD |
| GY0004 | GRAY, AIRCRAFT |
| GY0074 | GRAY, CINDER |
| GY0008 | GRAY, DARK |
| GY0049 | GRAY, DARK GULL |
| GY0171 | GRAY, FED STD 595, 26152 |
| GY0029 | GRAY, FED STD 595, 36231 |
| GY0155 | GRAY, FED STD 595, 36251 |
| GY0134 | GRAY, FED STD 595, 36270 |
| GY0033 | GRAY, FED STD 595, 36440 |
| GY0013 | GRAY, LIGHT GULL |
| GY0047 | GRAY, NATURAL |
| GY0072 | GRAY, NAVY |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0075 | GREEN, ARMY |
| GR0019 | GREEN, CRAYON |
| GR0020 | GREEN, DARK |
| GR0247 | GREEN, FED STD 595, 34052 |
| GR0073 | GREEN, FED STD 595, 34087 |
| GR0024 | GREEN, FOREST |
| GR0006 | GREEN, MEDIUM |
| GR0137 | GREEN, NAVY |
| GR0011 | GREEN, OLIVE |
| GR0007 | GREEN, SAGE |
| GR0064 | GREEN, SAGE, 1531 |
| GR0447 | GREEN, US AIR FORCE, 1001 |
| GR0119 | GREEN, US MARINE CORPS |
| KH0000 | KHAKI |
| NA0000 | NATURAL |
| LD0000 | OLIVE DRAB |
| LD0012 | OLIVE DRAB, US ARMY, 7 |
| RG0002 | ORANGE-YELLOW |
| RE0000 | RED |
| RU0000 | RUSSET |
| TA0000 | TAN |
| MS0054 | TAUPE |
| WH0000 | WHITE |
| WH0013 | WHITE, IVORY |
| WH0023 | WHITE, NATURAL |
| YE0000 | YELLOW |
| YE0036 | YELLOW, FED STD 595, 13538 |
IF STYLE/REPLY CODE(s) AEK OR ACN WERE ENTERED FOR MRC APTD, YOU MUST ANSWER MRC (BYBT and BTLM)
APTDDEND TYPE
INDICATES THE TYPE OF END.
Enter the applicable reply code from the table below
(APTDDACN)
| Table 1 |
| Reply Code (AK84) | Reply |
| AEK | BOTH FOLDED |
| AEL | BOTH PLAIN |
| AEJ | BOTH W/ATTACHMENTS |
| ACN | FOLDED |
| AAT | PLAIN |
| AEM | W/ATTACHMENT |
BYBT*DFOLD TYPE
INDICATES THE TYPE OF FOLD(S) UTILIZED ON THE ITEM.
Enter the applicable reply code from the table below
(BYBTDAD*;BYBTDAB$DAB*)
| Table 1 |
| Reply Code (AF05) | Reply |
| AB | LOOSE |
| AD | TIGHT |
BTLM*DATTACHMENT METHOD FOR WHICH DESIGNED
THE ATTACHMENT MEANS FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(BTLMDQH*;BTLMDQF$DQL*;BTLMDQF$$DQL*)
| Table 1 |
| Reply Code (AA78) | Reply |
| AAZ | BUCKLE |
| ABA | CEMENTED |
| QF | EYELET |
| QG | GROMMET |
| QH | HEAT SEAL |
| QJ | RIVETED |
| QK | SEWED |
| ABC | SLIDE LOOP |
| QL | SNAP FASTENER |
CBSZ*DEND ATTACHMENT/FASTENING FACILITY
AN INDICATION OF THE END ATTACHMENT/S/ AND/OR FASTENING FACILITY/IES/ PROVIDED. PLEASE USE MRC BBXW WITH ISAC CODING INPLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(CBSZDHW*;CBSZDFX$DGA*;CBSZDFX$$DGA*)
| Table 1 |
| Reply Code (AC52) | Reply |
| A | ANY ACCEPTABLE |
| HX | BARB |
| BL | BUCKLE |
| FS | BUCKLE TONGUE HOLE |
| HY | CLEVIS |
| DM | CLIP |
| HS | CONNECTING LINK |
| BR | D-RING |
| FT | END CLIP |
| AR | GROMMET |
| BY | HOOK |
| FW | KEEPER |
| FX | LOOP |
| HT | LOOP W/EYELET |
| FY | METALLIC GROMMET |
| FZ | PAD |
| AN | RING |
| GA | RIVET HOLE |
| CC | SNAP HOOK |
| FP | SOCKET SNAP |
| GB | STUD SNAP |
| HW | TURNBUCKLE |
CXKH*LBUCKLE STYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE BUCKLE.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(CXKHLB17*;CXKHLB36$LB1*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AZ10030 | B1 | END BAR WITH TONGUE |
| AZ10039 | B10 | CENTER NOTCHED BAR OFFSET |
| AZ10040 | B11 | NOTCHED EDGE |
| AZ10041 | B12 | NOTCHED EDGE |
| AZ10042 | B13 | NOTCHED EDGE |
| AZ10043 | B14 | NOTCHED EDGE |
| AZ10044 | B15 | SPRING ACTIVATED |
| AZ10045 | B16 | SINGLE BAR-TONGUELESS |
| AZ10046 | B17 | DOUBLE BAR-TONGUELESS |
| AZ10047 | B18 | TRIPLE BAR-TONGUELESS |
| AZ10048 | B19 | SINGLE BAR-TONGUELESS |
| AZ10031 | B2 | END BAR WITH TONGUE |
| AZ10049 | B20 | DOUBLE BAR-TONGUELESS |
| AZ10050 | B21 | TRIPLE BAR-TONGUELESS |
| AZ10051 | B22 | CENTER BAR-TONGUELESS |
| AZ10052 | B23 | SINGLE BAR-TONGUELESS |
| AZ10053 | B24 | DOUBLE BAR-TONGUELESS |
| AZ10054 | B25 | TRIPLE BAR-TONGUELESS |
| AZ10055 | B26 | END BAR NITH ROLLER AND NOTCHED EDGE |
| AZ10056 | B27 | NOTCHED EDGE |
| AZ10057 | B28 | HINGED |
| AZ10058 | B29 | CENTER BAR |
| AZ10032 | B3 | CENTER BAR WITH TONGUE |
| AZ10059 | B30 | CENTER BAR |
| AZ10060 | B31 | SPRING ACTIVATED |
| AZ10061 | B32 | LEVER ACTIVATED |
| AZ10062 | B33 | SPRING ACTIVATED |
| AZ10063 | B35 | BUTTON ACTIVATED |
| AZ10064 | B36 | SPRING ACTIVATED |
| AZ10065 | B37 | END LOOPS |
| AZ10066 | B38 | TIE DOWN |
| AZ10067 | B39 | END LOOPS |
| AZ10033 | B4 | CENTER BAR WITH TONGUE |
| AZ10068 | B40 | RATCHET |
| AZ10069 | B41 | TIE DOWN |
| AZ10070 | B42 | RATCHET |
| AZ10071 | B43 | BELT |
| AZ10072 | B44 | BELT |
| AZ10073 | B45 | SCALLOPED EDGE |
| AZ10074 | B46 | BELT |
| AZ10075 | B47 | BELT |
| AZ10076 | B48 | BELT |
| AZ10077 | B49 | BELT WITH HOOK |
| AZ10034 | B5 | END BAR WITH TONGUE AND ROLLER |
| AZ10078 | B50 | HOOK |
| AZ10079 | B51 | NOTCHED CENTER PLATE |
| AZ10080 | B52 | SLOTTED WITH CLIP |
| AZ10081 | B53 | STRAP ADJUSTING |
| DQ00338 | B54 | BELT |
| DR00039 | B55 | SIDE RELEASE |
| AZ10035 | B6 | END BAR WITH TONGUE AND ROLLER |
| AZ10036 | B7 | CENTER BAR WITH TONGUE AND ROLLER |
| AZ10037 | B8 | CENTER BAR WITH TONGUE AND ROLLER |
| AZ10038 | B9 | CENTER NOTCHED BAR-FLAT |
BYBP*GBUCKLE LOCATION
INDICATES THE LOCATION OF THE BUCKLE(S).
Enter clear text.
(BYBPGCLEARTEXT)
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC BYBQ, YOU MUST ANSWER MRC (BYBR)
BYBQ*DFASTENED BUCKLE FEATURE
AN INDICATION OF WHETHER OR NOT A FASTENED BUCKLE FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(BYBQDC*;BYBQDB$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BYBR*DBUCKLE FASTENING METHOD
THE MEANS USED TO FASTEN THE BUCKLE(S).
Enter the applicable reply code from the table below
(BYBRDDG*;BYBRDDE$DBR*;BYBRDDE$$DBR*)
| Table 1 |
| Reply Code (AF69) | Reply |
| KZ | END CLIP |
| DE | FRICTION |
| DF | LEVER ACTUATED |
| BR | RIVETED |
| DG | SERRATION |
| DH | SEWED |
| AN | SNAP FASTENER |
BYBS*GBUCKLE TONGUE HOLE LOCATION AND QUANTITY
INDICATES THE LOCATION AND NUMBER OF BUCKLE TONGUE HOLES ON THE ITEM.
Enter clear text.
(BYBSGCLEARTEXT)
BYBW*JDISTANCE FROM STRAP END TO FIRST HOLE
THE DISTANCE FROM THE STRAP END TO THE FIRST HOLE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BYBWJAB2.0*;BYBWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRF*JCENTER TO CENTER DISTANCE BETWEEN HOLES
THE CENTER TO CENTER DISTANCE BETWEEN HOLES ON THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRFJAC2.0*;ABRFJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CXKX*LEND CLIP STYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE END CLIP.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(CXKXLE8)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AZ10110 | E1 | FLAT CLIP |
| AZ10111 | E2 | FLAT CLIP |
| AZ10112 | E3 | BALL CLIP |
| AZ10113 | E4 | END CLIP |
| AZ10114 | E5 | END CLIP |
| AZ10115 | E6 | END CLIP |
| AZ10116 | E7 | END CLIP |
| AZ10117 | E8 | END HOOK |
| DQ00339 | E9 | FLAT SCALLOPED |
BYBZ*AEND CLIP QUANTITY
THE NUMBER OF END CLIPS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BYBZA10*)
BYCB*LHOOK STYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE HOOK(S).
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(BYCBLC7)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AZ10082 | C1 | PIVOT SNAP |
| AZ10091 | C10 | TRIGGER SNAP |
| AZ10092 | C11 | TRIGGER SNAP |
| AZ10093 | C12 | TRIGGER SNAP |
| AZ10083 | C2 | PIVOT SNAP |
| AZ10084 | C3 | PIVOT SNAP |
| AZ10085 | C4 | PIVOT SNAP |
| AZ10086 | C5 | PIVOT SNAP |
| AZ10087 | C6 | SLIDING BOLT SNAP |
| AZ10088 | C7 | SLIDING BOLT SNAP |
| AZ10089 | C8 | SPRING BLADE SNAP |
| AZ10090 | C9 | SPRING BLADE SNAP |
BYCC*DHOOK CONNECTION TYPE
INDICATES THE TYPE OF HOOK CONNECTION(S) PROVIDED.
Enter the applicable reply code from the table below
(BYCCDAE*;BYCCDAD$DAD*)
| Table 1 |
| Reply Code (AL49) | Reply |
| AE | NONSWIVELING |
| AD | SWIVELING |
ATWT*AHOOK QUANTITY
THE NUMBER OF HOOKS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(ATWTA10*)
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC BYCD, YOU MUST ANSWER MRC (BYCF)
BYCD*DFASTENED HOOK FEATURE
AN INDICATION OF WHETHER OR NOT A FASTENED HOOK FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(BYCDDC)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BYCF*DHOOK FASTENING METHOD
THE MEANS USED TO FASTEN THE HOOK(S).
Enter the applicable reply code from the table below
(BYCFDDH*;BYCFDBR$DAN*;BYCFDBR$$DAN*)
| Table 1 |
| Reply Code (AF69) | Reply |
| A | ANY ACCEPTABLE |
| BR | RIVETED |
| DH | SEWED |
| AN | SNAP FASTENER |
BYCH*AKEEPER QUANTITY
THE NUMBER OF KEEPERS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BYCHA10*)
BYCJ*DFASTENED KEEPER FEATURE
AN INDICATION OF WHETHER OR NOT A FASTENED KEEPER FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(BYCJDB)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
AJUU*LLOOP STYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE LOOP(S).
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AJUULD4)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AZ10094 | D1 | RECTANGLE |
| AZ10103 | D10 | OFFSET |
| AZ10104 | D11 | HOOK |
| AZ10105 | D12 | LOOP AND KEEPER |
| AZ10106 | D13 | DELTA |
| AZ10107 | D14 | RECTANGLE |
| AZ10108 | D15 | DOUBLE OPENING |
| AZ10109 | D16 | Y |
| AZ10095 | D2 | RECTANGLE |
| AZ10096 | D3 | FLAT W/HOOK |
| AZ10097 | D4 | FLAT |
| AZ10098 | D5 | RECTANGLE |
| AZ10099 | D6 | FOOTMANS LOOP |
| AZ10100 | D7 | FLAT |
| AZ10101 | D8 | OFFSET |
| AZ10102 | D9 | FLAT |
AAUB*JHOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAUBJAB2.0*;AAUBJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJT*JINSIDE WIDTH
AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJTJAB2.0*;ADJTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJU*JINSIDE LENGTH
A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJUJAA2.0*;ADJUJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJV*JOUTSIDE WIDTH
AN OUTSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJVJAA2.0*;ADJVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFMQ*JINSIDE HEIGHT
AN INSIDE MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN ITEM,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFMQJAB2.0*;AFMQJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC BYCM, YOU MUST ANSWER MRC (BYCN)
BYCM*DFASTENED LOOP FEATURE
AN INDICATION OF WHETHER OR NOT A FASTENED LOOP FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(BYCMDB*;BYCMDC$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BYCN*DLOOP FASTENING METHOD
THE MEANS USED TO FASTEN THE LOOP(S).
Enter the applicable reply code from the table below
(BYCNDDH*;BYCNDBR$DBR*;BYCNDBR$$DBR*)
| Table 1 |
| Reply Code (AF69) | Reply |
| BR | RIVETED |
| DH | SEWED |
BYCP*GLOOP LOCATION
INDICATES THE LOCATION OF THE LOOP(S).
Enter clear text.
(BYCPGCLEARTEXT)
BYCQ*AGROMMET QUANTITY
THE NUMBER OF GROMMETS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BYCQA10*)
CXLC*LGROMMET BARREL STYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE GROMMET BARREL.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(CXLCLF6*;CXLCLF3$$LF9*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AZ10118 | F1 | STRAIGHT ROUND TYPE |
| AZ10127 | F10 | TAPERED RECTANGULAR WITH ROUND ENDS TYPE |
| AZ10119 | F2 | STRAIGHT ROUND TYPE |
| AZ10120 | F3 | STRAIGHT SQUARE TYPE |
| AZ10121 | F4 | STRAIGHT ELLIPTICAL TYPE |
| AZ10122 | F5 | STRAIGHT RECTANGULAR WITH ROUND END TYPE |
| AZ10123 | F6 | FUNNEL FLANGE STRAIGHT TYPE |
| AZ10124 | F7 | FUNNEL FLANGE TAPERED TYPE |
| AZ10125 | F8 | BELL FLANGE STRAIGHT TYPE |
| AZ10126 | F9 | BELL FLANGE TAPERED TYPE |
CXLS*LGROMMET FLANGE STYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE GROMMET FLANGE.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(CXLSLG2*;CXLSLG1$LG5*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AZ10129 | G1 | FLANGE |
| AZ10130 | G2 | FLANGE |
| AZ10131 | G3 | FLANGE |
| AZ10132 | G4 | FLANGE |
| AZ10133 | G5 | FLANGE |
CXMC*LGROMMET WASHER STYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE GROMMET WASHER.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(CXMCLH1*;CXMCLH6$LH5*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AZ10134 | H1 | FLAT |
| AZ10135 | H2 | FLAT W/FORMED INNER EDGE |
| AZ10136 | H3 | DOUBLE ROW TOOTHED |
| AZ10137 | H4 | SINGLE ROW TOOTHED WITH FLANGE |
| AZ10138 | H5 | SINGLE ROW TOOTHED |
| AZ10139 | H6 | BARREL TYPE |
BYCS*JDISTANCE FROM STRAP END TO FIRST GROMMET HOLE CENTER
THE DISTANCE FROM THE STRAP END TO THE HOLE CENTER OF THE FIRST GROMMET.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BYCSJAA2.0*;BYCSJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BYCT*JDISTANCE BETWEEN GROMMET HOLE CENTERS
THE DISTANCE BETWEEN GROMMET HOLE CENTERS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BYCTJAB2.0*;BYCTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARME*JPAD LENGTH
A MEASUREMENT OF THE LONGEST,OR LONGER,DIMENSION OF A PAD TAKEN AS A UNIT OF MEASURE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARMEJAB2.0*;ARMEJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARMF*JPAD WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE MEASURED LENGTH OF A PAD TAKEN AS A UNIT OF MEASURE,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARMFJAB2.0*;ARMFJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BYCY*DPAD FASTENING METHOD
THE MEANS USED TO FASTEN THE PAD(S).
Enter the applicable reply code from the table below
(BYCYDDJ*;BYCYDBK$DDL*;BYCYDBK$$DDL*)
| Table 1 |
| Reply Code (AF69) | Reply |
| BK | ADHESIVE |
| DJ | BONDED |
| DK | CEMENTED |
| BR | RIVETED |
| DH | SEWED |
| DL | SLOTTED |
BYCZ*DRING SHAPE
THE PHYSICAL CONFIGURATION OF THE RING.
Enter the applicable reply code from the table below
(BYCZDAYM*;BYCZDBJA$DZL*;BYCZDBJA$$DZL*)
| Table 1 |
| Reply Code (AD07) | Reply |
| CR | CIRCULAR |
| GN | D |
| BJA | DELTA SHAPE SWIVEL FITTING W/LONG THREAD |
| ZP | DELTA SHAPE SWIVEL FITTING W/SHORT THREAD |
| ZN | DELTA SHAPE W/SWIVEL FITTING |
| ZL | D-SHAPE W/SHORT THREADED SWIVEL FITTING |
| ZM | D-SHAPE W/THREADED STUB |
| AND | RECTANGULAR |
| RD | ROUND |
| AXP | TRIANGULAR |
| AYM | V |
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC BYDB, YOU MUST ANSWER MRC (BYDC)
BYDB*DFASTENED RING FEATURE
AN INDICATION OF WHETHER OR NOT A FASTENED RING FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(BYDBDB*;BYDBDC$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BYDC*DRING FASTENING METHOD
THE MEANS USED TO FASTEN THE RING(S).
Enter the applicable reply code from the table below
(BYDCDDH*;BYDCDBR$DBR*)
| Table 1 |
| Reply Code (AF69) | Reply |
| BR | RIVETED |
| DH | SEWED |
BYDD*GRING LOCATION
INDICATES THE LOCATION OF THE RING(S).
Enter clear text.
(BYDDGCLEARTEXT)
AGZR*ARIVET HOLE QUANTITY
THE NUMBER OF RIVET HOLES INCLUDED ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AGZRA10*)
BYDF*JSHORTEST DISTANCE FROM STRAP END TO SNAP FASTENER
THE SHORTEST DISTANCE FROM THE END OF THE STRAP TO THE SNAP FASTENER.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BYDFJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDJB*;ENACDHB$$DHB*)
| Table 1 |
| Reply Code (EN02) | Reply |
| JB | ASBESTOS ALTERNATIVE - HARDWARE PRODUCTS - WIPER RINGS |
| HB | COMPREHENSIVE PROCUREMENT GUIDELINE - MISCELLANEOUS PRODUCTS - MANUAL-GRADE STRAPPING |
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDPTA000*;PRMTDAZA000$DPDA000*;PRMTDAZA000$$DPDA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJIRA000E2.0*;PMWTJIRA000E2.0$JIRA000E2.0*;PMWTJIRA000E2.0$$JIRA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJRHA0002.0*;PMLCJRHA0002.0$JRHA0002.0*;PMLCJRHA0002.0$$JRHA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ222*;HZRDDHAZ011$$DHAZ042*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ042 | ASBESTOS |
| HAZ011 | CHROMIUM |
| HAZ012 | COPPER |
| HAZ222 | IRON |
| HAZ030 | MAGNESIUM ALLOY |
| HAZ252 | NICKEL |
| HAZ277 | PHENOL |
| HAZ285 | PLASTIC |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information