A device used on a tracked vehicle incorporating means for manual adjustments to eliminate the looseness in the track linkage due to excessive usage.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED41097*)
CYHXAVEHICLE DESIGN CONTROL ACTIVITY
THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER ENTITY,WHICH CONTROLS THE DESIGN OF THE VEHICLE.
Enter the alpha-numeric reply with five character(s) exactly.
(CYHXAN0V6S)
AJJXDCOMPONENT DOCUMENT ORIGIN
THE ORIGINATOR /GOVERNMENTAL,INDUSTRIAL,OR OTHERWISE/ OF THE AVAILABLE DOCUMENT WHICH LISTS THE COMPONENT/S/ OF THE ITEM.
Enter the applicable reply code from the table below
(AJJXDAD)
| Table 1 |
| Reply Code (AF59) | Reply |
| AF | GOVERNMENT |
| AD | INDUSTRIAL |
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the alpha-numeric reply with a minimum of one character.
(AAJDAQ2)
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable reply code from the table below
(AAJFDAAL)
| Table 1 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
AWKH*JARM LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ARM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWKHJAB2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAG*JMOUNTING STUD LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE MOUNTING STUD,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAGJAC2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the alpha-numeric reply with a minimum of one character.
(CMLPAE4)
AJJZ*DDOCUMENT TYPE
INDICATES THE TYPE OF DOCUMENT BY THE TITLE.
Enter the applicable reply code from the table below
(AJJZDCD)
| Table 1 |
| Reply Code (AF70) | Reply |
| BD | BILL OF MATERIAL |
| BE | CATALOG SHEET |
| CD | COMMERCIAL CATALOG |
| CH | DESIGN CONTROL DRAWING |
| AN | ENGINEERING DRAWING |
| BK | INDUSTRIAL DRAWING |
| AC | MILITARY SPECIFICATION |
| AF | MILITARY STANDARD |
| BT | PARTS LIST |
| AB | TECHNICAL MANUAL |
AJKC*GSUPPLY ITEMS AND QUANTITIES
A LISTING OF THOSE MAJOR COMPONENTS WHICH ARE COMPRISED OF A NATIONAL STOCK NUMBER,AN ITEM NAME,STANDARDIZED NAME,OR PART NAME,AND THE NUMBER OF EACH.
Enter clear text.
(AJKCGCLEARTEXT)
AJJW*ACOMPONENT QUANTITY
THE NUMBER OF COMPONENTS INCLUDED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AJJWA10*)
CYHY*AVEHICLE IDENTIFICATION DESIGNATOR
THE NAME OR COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH IDENTIFY THE SPECIFIC VEHICLE.
Enter the alpha-numeric reply with a minimum of one character.
(CYHYAH5)
ATEM*JEXTENDED LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM WHEN IT IS IN AN EXTENDED POSITION,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATEMJLB2.0*;ATEMJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AMQZ*JCOMPRESSED LENGTH
A MEASUREMENT OF THE SMALLEST LENGTH TO WHICH THE ITEM MAY BE COMPRESSED,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AMQZJLB2.0*;AMQZJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDPCK000*;SFTTDPNG000$DRSA000*;SFTTDPNG000$$DRSA000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| ECA000 | ACID NITRIC |
| MSB000 | ADHESIVE |
| MSL000 | ALODIZE |
| AZ0000 | ALUMINIZED |
| ALB000 | ALUMINUM |
| ALA000 | ALUMINUM ALLOY |
| AL1100 | ALUMINUM ALLOY 1100 |
| AL5083 | ALUMINUM ALLOY 5083 |
| AL5356 | ALUMINUM ALLOY 5356 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL7075 | ALUMINUM ALLOY 7075 |
| MTA000 | AMALGAM |
| ANA000 | ANODIZE |
| ANA010 | ANODIZED, MIL-A-8625, TYPE 3, CLASS 2 |
| ASA000 | ASBESTOS |
| CPB000 | ASPHALT |
| BCF000 | BLACK CHEMICAL FINISH |
| XXG000 | BLACK OXIDE |
| CDA000 | CADMIUM |
| CDB000 | CADMIUM ALLOY |
| CAA000 | CALCIUM |
| CNA000 | CARBON |
| CNB000 | CARBON COATED |
| AAA001 | CARC (CHEMICAL AGENT RESISTANT COATING) |
| MSE000 | CEMENT |
| CLB000 | CERAMIC |
| AAA002 | CHEMICAL |
| XXH000 | CHEMICAL FILM |
| CMA000 | CHROMATE |
| CMC000 | CHROMATE MAGNESIUM |
| CMB000 | CHROMATE ZINC |
| CRC000 | CHROMIC ACID ANODIZING |
| CRA000 | CHROMIUM |
| CRB000 | CHROMIUM OXIDE |
| CLA000 | CLAY |
| CTA000 | COBALT |
| CPC000 | COMPOUND |
| CPA000 | COMPOUND GLAZE |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| ZND000 | DASHBOARD |
| DCA000 | DICHROMATE |
| DCE000 | DICHROMATE COPPER |
| DCB000 | DICHROMATE POTASSIUM |
| DCD000 | DICHROMATE SODIUM |
| DCC000 | DICHROMATE ZINC |
| LCE000 | DISULFIDE MOLYBDENUM |
| MSG000 | ELECTROPLATED COPPER |
| MSH000 | ELECTROPLATED STEEL |
| ENA000 | ENAMEL |
| ENJ000 | ENAMEL ALKYD |
| ENG000 | ENAMEL ALUMINUM |
| END000 | ENAMEL BAKED |
| ENE000 | ENAMEL GLOSS |
| ENB000 | ENAMEL LUSTERLESS |
| CLD000 | ENAMEL PORCELAIN |
| ENF000 | ENAMEL SEMIGLOSS |
| ENC000 | ENAMEL SYNTHETIC LUSTERLESS |
| ENW000 | ENAMEL, WRINKLE FINISH |
| MSD000 | EPOXY |
| MSD001 | EPOXY COATED |
| AA0001 | EPOXY PRIMER MIL-P-53022 |
| FRS000 | FROSTED |
| GLA000 | GLASS FIBER |
| AUA000 | GOLD |
| GFA000 | GRAPHITE |
| MTE000 | GUNMETAL |
| ZNE000 | HEATER |
| MTC000 | INDIUM |
| IRA000 | IRIDIUM |
| FEA000 | IRON |
| LQA000 | LACQUER |
| LQD000 | LACQUER ACRYLIC |
| LQF000 | LACQUER ACRYLIC CELLULOSE ACETATE BUTYRATE |
| LQC000 | LACQUER ALUMINUM |
| LQB000 | LACQUER ALUMINUM CELLULOSE |
| LQJ000 | LACQUER CELLULOSE ACETATE |
| LQG000 | LACQUER FLAT |
| LQK000 | LACQUER FLUOROCARBON |
| LQH000 | LACQUER GLOSS |
| LQE000 | LACQUER NITROCELLULOSE |
| PBA000 | LEAD |
| PBB000 | LEAD ALLOY |
| PB0001 | LEAD ALLOY 19 |
| PB0002 | LEAD ALLOY UNS 54710 |
| LCB000 | LUBRICANT |
| LCC000 | LUBRICANT DRY FILM |
| MAA000 | MALLEABLE STAINLESS ALLOY |
| MNA000 | MANGANESE |
| ZNG000 | MATTE FINISH |
| MTB000 | MOLYBDENUM |
| NLA000 | NICKEL |
| NLC000 | NICKEL ALLOY |
| NLE000 | NICKEL PLATED |
| NLB000 | NICKEL SILVER |
| NLD000 | NICKEL SULFAMATE |
| MSK000 | NITRIDE |
| XXJ000 | NON-ELECTROLYTIC PASSIVATED INORGANIC COATING |
| LCA000 | OIL |
| LCF000 | OIL TUNG |
| XXB000 | OXIDE |
| XXF000 | OXIDE ALUMINUM |
| XXE000 | OXIDE COPPER |
| XXA000 | OXIDE FILM |
| XXC000 | OXIDE IRON |
| XXD000 | OXIDE ZINC |
| PNA000 | PAINT |
| PNC000 | PAINT ALUMINUM |
| PND000 | PAINT EPOXY |
| PNB000 | PAINT HEAT RESISTANT |
| PNG000 | PAINT LUSTERLESS |
| PNA001 | PAINT MIL-DTL 64159 |
| PNE000 | PAINT POLYURETHANE |
| PNL000 | PAINT SILICATE EPOXY |
| PNH000 | PAINT SILICATE PHOSPHATE |
| PNK000 | PAINT SILICATE VINYL |
| PNJ000 | PAINT SILICONE ZINC |
| PNF000 | PAINT VINYL ALKYD |
| PNM000 | PAINT WRINKLE FINISH BLACK |
| AAA000 | PAINTED |
| PDA000 | PALLADIUM |
| PSA000 | PASSIVATE |
| LCG000 | PETROLATUM |
| PHA000 | PHOSPHATE |
| PHF000 | PHOSPHATE COPPER |
| PHG000 | PHOSPHATE FLUORIDE |
| PHB000 | PHOSPHATE IRON |
| PHC000 | PHOSPHATE MANGANESE |
| PHE000 | PHOSPHATE NICKEL |
| PHD000 | PHOSPHATE ZINC |
| PCA000 | PLASTIC |
| PCX000 | PLASTIC ABS |
| PCK000 | PLASTIC ACRYLIC |
| PCAP00 | PLASTIC ALLYL |
| PCE000 | PLASTIC CELLULOSE ACETATE |
| PCQ000 | PLASTIC CELLULOSE ACETATE BUTYRATE |
| PCAJ00 | PLASTIC CELLULOSE NITRATE |
| PCN000 | PLASTIC DIALLYL PHTHALATE |
| PCS000 | PLASTIC EPOXY |
| PCAF00 | PLASTIC EPOXY FORMALDEHYDE |
| PCAD00 | PLASTIC EPOXY POLYAMIDE |
| PCR000 | PLASTIC ETHYL CELLULOSE |
| PCAL00 | PLASTIC FLUORINATED ETHYLENE PROPYLENE |
| PCZ000 | PLASTIC FLUOROCARBON |
| PCL000 | PLASTIC MELAMINE |
| PCM000 | PLASTIC PHENOLIC |
| PCF000 | PLASTIC POLYAMIDE |
| PCG000 | PLASTIC POLYCARBONATE |
| PCAH00 | PLASTIC POLYESTER |
| PCAC00 | PLASTIC POLYETHYLENE |
| PCAK00 | PLASTIC POLYFLUOROETHYLENEPROPYLENE |
| PCAB00 | PLASTIC POLYHEXAMETHYLENE AMIDE |
| PCAM00 | PLASTIC POLYIMIDE |
| PCAG00 | PLASTIC POLYOLEFIN |
| PCAA00 | PLASTIC POLYPROPYLENE |
| PCJ000 | PLASTIC POLYSTYRENE |
| PCP000 | PLASTIC POLYSULFONE |
| PCB000 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCT000 | PLASTIC POLYTRIFLUOROETHYLENE |
| PCA001 | PLASTIC POLYUREA |
| PCY000 | PLASTIC POLYURETHANE |
| PCW000 | PLASTIC POLYVINYL ACETATE |
| PCC000 | PLASTIC POLYVINYL CHLORIDE |
| PCD000 | PLASTIC PYROXYLIN |
| PCAN00 | PLASTIC TETRAFLUOROETHYLENE |
| PCH000 | PLASTIC VINYL |
| PTA000 | PLATINUM |
| PTB000 | PLATINUM ALLOY |
| CLC000 | PORCELAIN |
| MTD000 | POTASSIUM |
| AAA004 | POWDER COATED |
| AA0000 | POWDER COATED MIL-P-22750 |
| AAA003 | POWDER COATED, MIL-PRF-24712 |
| PRA000 | PRIMER |
| PRF000 | PRIMER EPOXY |
| PRA001 | PRIMER EPOXY-LEAD AND CHROMIUM FREE |
| PRD000 | PRIMER EPOXY-POLYAMIDE |
| PRB000 | PRIMER HEAT RESISTANT |
| PRE000 | PRIMER ZINC |
| PRC000 | PRIMER ZINC CHROMATE |
| RSA000 | RESIN SILICONE |
| RSB000 | RESIN SYNTHETIC |
| RHA000 | RHODIUM |
| ZNC000 | ROOF |
| RCA000 | RUBBER |
| RC0019 | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RCK000 | RUBBER FLUOROCARBON |
| RC0017 | RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR |
| RCJ000 | RUBBER POLYBUTADIENE |
| RC0020 | RUBBER POLYISOPRENE NATURAL CLASS NR |
| RC0023 | RUBBER POLYSULFIDE CLASS T |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| MSJ000 | RUSTPROOF |
| MSA000 | SHELLAC |
| SLB000 | SILICATE POTASSIUM |
| SLA000 | SILICON |
| AGA000 | SILVER |
| AG0001 | SILVER 3304.2 |
| AGB000 | SILVER ALLOY |
| AGC000 | SILVER DIP |
| SRA000 | SOLDER |
| LCD000 | SULFIDE MOLYBDENUM |
| MSC000 | TAR |
| SNA000 | TIN |
| SNB000 | TIN ALLOY |
| SN0003 | TIN ALLOY UNS L13601 |
| SN0001 | TIN ALLOY UNS L13700 |
| SN0007 | TIN ALLOY UNS L13890 |
| SN0002 | TIN UNS L13002 |
| TTA000 | TITANIUM |
| TTB000 | TITANIUM ALLOY |
| TNA000 | TUNGSTEN |
| TNB000 | TUNGSTEN ALLOY |
| VAA000 | VARNISH |
| VAD000 | VARNISH BLACK |
| VAE000 | VARNISH COLORLESS |
| VAC000 | VARNISH PHENOLIC |
| VAF000 | VARNISH SILICONE |
| VAB000 | VARNISH SYNTHETIC |
| VIN000 | VINYL COATED |
| WXA000 | WAX |
| WXB000 | WAX PARAFFIN |
| ZNA000 | ZINC |
| ZNB000 | ZINC ALLOY |
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEXT*GGENERAL CHARACTERISTICS ITEM DESCRIPTION
A RECORDING OF THE PHYSICAL,FUNCTIONAL,AND PERFORMANCE CHARACTERISTICS FOR AN ITEM OF SUPPLY.
Enter clear text.
(TEXTGCLEARTEXT)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information