Table 1
	Reply Code (MA01)	Reply
	ADA000	ADHESIVE
	ALA000	ALUMINUM
	ALB000	ALUMINUM ALLOY
	CRA000	CHROMIUM
	CRB000	CHROMIUM ALLOY
	CUA000	COPPER
	CUB000	COPPER ALLOY
	CKA000	CORK
	CCA000	COTTON
	LBF000	DISULFIDE MOLYBDENUM
	FBS000	FIBER SYNTHETIC
	WDA000	FIBERBOARD
	GSA000	GLASS
	GSE000	GLASS BOROSILICATE
	GSB000	GLASS FIBER
	GSH000	GLASS PLATE
	GSG000	GLASS SAFETY
	GSL000	GLASS SHEET
	GSM000	GLASS WIRED
	AUA000	GOLD
	AUB000	GOLD ALLOY
	GFA000	GRAPHITE
	FEA000	IRON
	FEF000	IRON ALLOY
	FEB000	IRON CAST
	FED000	IRON CAST ALLOY
	FEH000	IRON CAST MALLEABLE
	FEJ000	IRON DUCTILE
	FEC000	IRON MALLEABLE
	PBA000	LEAD
	PBB000	LEAD ALLOY
	LRA000	LEATHER
	MGB000	MAGNESIUM ALLOY
	MBA000	MOLYBDENUM
	MBB000	MOLYBDENUM ALLOY
	NLA000	NICKEL
	NLB000	NICKEL ALLOY
	PCA000	PLASTIC
	STA000	STEEL
	STB000	STEEL CORROSION RESISTING

Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.

MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION

THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.

Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.

(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)

Table 1
	Reply Code (AP33)	Reply
	Q	AEROSPACE MATERIAL SPEC STD
	J	AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
	G	ASSN STD
	A	COMMERCIAL ITEM DESCRIPTION
	K	DEF STAN/SPEC
	B	FED SPEC
	C	FED STD
	L	GOVERNMENT STD/SPEC
	N	INTERNATIONAL STD/SPEC
	F	MFR REF
	D	MIL SPEC
	E	MIL STD
	H	NATIONAL SPEC
	P	NATIONAL STD
	M	NATIONAL STD/SPEC

Table 2
	Reply Code (AP18)	Reply
	M	10TH MATERIAL RESPONSE
	N	11TH MATERIAL RESPONSE
	P	12TH MATERIAL RESPONSE
	Q	13TH MATERIAL RESPONSE
	R	14TH MATERIAL RESPONSE
	S	15TH MATERIAL RESPONSE
	T	16TH MATERIAL RESPONSE
	U	17TH MATERIAL RESPONSE
	W	18TH MATERIAL RESPONSE
	X	19TH MATERIAL RESPONSE
	B	1ST MATERIAL RESPONSE
	Y	20TH MATERIAL RESPONSE
	Z	21ST MATERIAL RESPONSE
	V	22ND MATERIAL RESPONSE
	C	2ND MATERIAL RESPONSE
	D	3RD MATERIAL RESPONSE
	E	4TH MATERIAL RESPONSE
	F	5TH MATERIAL RESPONSE
	H	6TH MATERIAL RESPONSE
	J	7TH MATERIAL RESPONSE
	K	8TH MATERIAL RESPONSE
	L	9TH MATERIAL RESPONSE
	G	ALL MATERIAL RESPONSES
	A	SINGLE MATERIAL RESPONSE

FTLD*GFUNCTIONAL DESCRIPTION

DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.

Enter the reply from the applicable document.

(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)

HUES*DCOLOR

A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.

Enter the applicable reply code from the table below

(HUESDYE0000)

Table 1
	Reply Code (AD06)	Reply
	BL0000	BLACK
	BU0000	BLUE
	BR0000	BROWN
	GY0000	GRAY/GREY
	GR0000	GREEN
	VY0000	IVORY
	RG0000	ORANGE
	RE0000	RED
	TA0000	TAN
	VL0000	VIOLET
	WH0000	WHITE
	YE0000	YELLOW

SFTT*DSURFACE TREATMENT

THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.

Enter the applicable reply code from the table below

(SFTTDALB000)

Table 1
	Reply Code (SF01)	Reply
	MSL000	ALODIZE
	ALB000	ALUMINUM
	ANA000	ANODIZE
	CDA000	CADMIUM
	CLB000	CERAMIC
	CMA000	CHROMATE
	CMB000	CHROMATE ZINC
	CRA000	CHROMIUM
	CUA000	COPPER
	DCA000	DICHROMATE
	LCE000	DISULFIDE MOLYBDENUM
	ENA000	ENAMEL
	ENJ000	ENAMEL ALKYD
	ENB000	ENAMEL LUSTERLESS
	ENF000	ENAMEL SEMIGLOSS
	AUA000	GOLD
	LQA000	LACQUER
	LQD000	LACQUER ACRYLIC
	MNA000	MANGANESE
	MTB000	MOLYBDENUM
	NLA000	NICKEL
	NLD000	NICKEL SULFAMATE
	XXB000	OXIDE
	XXF000	OXIDE ALUMINUM
	XXD000	OXIDE ZINC
	PNA000	PAINT
	PNC000	PAINT ALUMINUM
	PHA000	PHOSPHATE
	PCA000	PLASTIC
	PRA000	PRIMER
	MSA000	SHELLAC
	TTA000	TITANIUM

STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION

THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.

(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)

Table 1
	Reply Code (AP33)	Reply
	G	ASSN STD
	A	COMMERCIAL ITEM DESCRIPTION
	K	DEF STAN/SPEC
	B	FED SPEC
	C	FED STD
	L	GOVERNMENT STD/SPEC
	N	INTERNATIONAL STD/SPEC
	F	MFR REF
	D	MIL SPEC
	E	MIL STD
	H	NATIONAL SPEC
	P	NATIONAL STD
	M	NATIONAL STD/SPEC

Table 2
	Reply Code (AP39)	Reply
	M	10TH TREATMENT RESPONSE
	N	11TH TREATMENT RESPONSE
	P	12TH TREATMENT RESPONSE
	Q	13TH TREATMENT RESPONSE
	R	14TH TREATMENT RESPONSE
	S	15TH TREATMENT RESPONSE
	B	1ST TREATMENT RESPONSE
	C	2ND TREATMENT RESPONSE
	D	3RD TREATMENT RESPONSE
	E	4TH TREATMENT RESPONSE
	F	5TH TREATMENT RESPONSE
	H	6TH TREATMENT RESPONSE
	J	7TH TREATMENT RESPONSE
	K	8TH TREATMENT RESPONSE
	L	9TH TREATMENT RESPONSE
	G	ALL TREATMENT RESPONSES
	A	SINGLE TREATMENT RESPONSE

AAXX*DMOUNTING TYPE

INDICATES THE TYPE OF MOUNT UTILIZED TO SUPPORT THE ITEM.

Enter the applicable reply code from the table below

(AAXXDAFS)

Table 1
	Reply Code (AA78)	Reply
	AAS	FUSELAGE
	AFS	PYLON
	AAT	WING

AYQM*DMOUNTING LOCATION

INDICATES THE MOUNTING LOCATION FOR WHICH THE ITEM IS DESIGNED.

Enter the applicable reply code from the table below

(AYQMDBAT)

Table 1
	Reply Code (AJ91)	Reply
	BAS	BOTH WINGS
	BAT	LEFT WING
	BAW	RIGHT WING

ASKE*ADISPENSER MODEL NUMBER

THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE DISPENSER.

Enter the alpha-numeric reply with a minimum of one character.

(ASKEAQ6)

CWST*DITEM FOR WHICH DISPENSER IS DESIGNED

THE ITEM FOR WHICH THE DISPENSER IS DESIGNED.

Enter the applicable reply code from the table below

(CWSTDDQB)

Table 1
	Reply Code (AK54)	Reply
	DPX	BOMB
	DPY	MACHINE GUN POD
	DPZ	MINE
	DQA	ROCKET
	DQB	TORPEDO

BCQYDAIRCRAFT TYPE FOR WHICH DESIGNED

INDICATES THE TYPE OF AIRCRAFT FOR WHICH THE ITEM IS DESIGNED.

Enter the applicable reply code from the table below

(BCQYDAAB)

Table 1
	Reply Code (AM91)	Reply
	AAB	FIXED WING
	AAC	ROTARY WING

CYEPAAIRCRAFT MODEL NUMBER

THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE AIRCRAFT.

Enter the alpha-numeric reply with a minimum of one character.

(CYEPAQ6)

BWJF*DSIDE FOR WHICH DESIGNED

AN INDICATION OF THE SIDE FOR WHICH THE ITEM IS DESIGNED.

Enter the applicable reply code from the table below

(BWJFDADC)

Table 1
	Reply Code (AJ91)	Reply
	ADC	BOTH SIDES
	ACF	LEFT SIDE
	ACR	RIGHT SIDE

AARN*DFABRICATION METHOD

THE PROCESS USED IN MANUFACTURING THE ITEM.

Enter the applicable reply code from the table below

(AARNDAL)

Table 1
	Reply Code (AA62)	Reply
	AN	CAST
	AP	CELLULAR, EXPLODED
	AQ	CELLULAR, UNEXPLODED
	KZ	COMPOSITE
	AD	CORRUGATED
	DE	DROP FORGED
	DZ	GROUND
	LB	HONEYCOMB
	AT	LAMINATED
	AZ	MACHINED
	AM	MOLDED
	LC	SANDWICH
	AL	STAMPED

ABHP*JOVERALL LENGTH

THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADAV*JOVERALL DIAMETER

A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADAVJLA2.0*;ADAVJLA2.0$$JLA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABMK*JOVERALL WIDTH

AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABKW*JOVERALL HEIGHT

THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABKWJLA2.0*;ABKWJLA2.0$$JLA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABPX*JMATERIAL THICKNESS

A MEASUREMENT OF THE SMALLEST DIMENSION OF THE MATERIAL,IN DISTINCTION FROM LENGTH OR WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABPXJLA2.0*;ABPXJLA2.0$$JLA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABFF*DFURNISHED ITEMS

ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.

Enter the applicable reply code from the table below

(ABFFDASX)

Table 1
	Reply Code (AB28)	Reply
	BQP	ANGLE
	BKY	BEARING
	ABR	BOLT
	AYH	BRACE
	ABS	BRACKET
	AJM	BUSHING
	AEL	CAP
	AYK	CHANNEL
	AMN	CLAMP
	ASX	CLIP
	ATF	COLLAR
	BCA	COTTER PIN
	BRF	CUSHION
	ARF	ELECTRICAL CONNECTOR COVER
	BCC	EYEBOLT
	ACN	GASKET
	ADM	GROMMET
	BQW	HINGE
	BCJ	HOOK
	AJR	INSERT
	BRD	LOCK BOLT
	ACB	LOCK WASHER
	ADW	LOCKNUT
	BRE	LUG
	AEK	MOUNTING BRACKET
	AAN	MOUNTING NUT
	ABW	NUT
	BQS	NUT PLATE
	ABY	PIN
	ATB	PLATE
	BGG	RETAINER
	ATC	RIVET
	AMX	SCREW
	AFH	SEAL
	BPQ	SHIM
	ATD	SPACER
	AMY	SPRING
	ABJ	STORAGE CASE
	AFN	STUD
	BAW	SUPPORT
	AJW	WASHER
	ADA	WRENCH

CBBL*DFEATURES PROVIDED

THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.

Enter the applicable reply code from the table below

(CBBLDFVN)

Table 1
	Reply Code (AN47)	Reply
	BSZ	ELECTROSTATIC SENSITIVE
	FVN	FRAMED
	FVP	NOT FRAMED

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

AFJN*DFRAGILITY FACTOR

THE MEASURE OF SENSITIVITY OF THE ITEM TO BE PACKAGED. A FACTOR USED BY PACKAGING ENGINEERS IN DEVISING PROPER CUSHIONING IN A PACKAGE.

Enter the applicable reply code from the table below

(AFJNDE)

Table 1
	Reply Code (AD40)	Reply
	E	MODERATELY DELICATE
	F	MODERATELY RUGGED

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE

AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.

Enter the applicable reply code from the table below

(NHCFDCY)

Table 1
	Reply Code (AD05)	Reply
	CY	HARDENED

PRMT*DPRECIOUS MATERIAL

IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.

Enter the applicable reply code from the table below

(PRMTDPDA000)

Table 1
	Reply Code (MA01)	Reply
	AUA000	GOLD
	IRA000	IRIDIUM
	AZA000	OSMIUM
	PDA000	PALLADIUM
	PTA000	PLATINUM
	REA000	RHENIUM
	RHA000	RHODIUM
	RTA000	RUTHENIUM
	AGA000	SILVER

PMWT*JPRECIOUS MATERIAL AND WEIGHT

AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(PMWTJAZA000F2.0*)

Table 1
	Reply Code (MA01)	Reply
	AUA000	GOLD
	IRA000	IRIDIUM
	AZA000	OSMIUM
	PDA000	PALLADIUM
	PTA000	PLATINUM
	RHA000	RHODIUM
	RTA000	RUTHENIUM
	AGA000	SILVER

Table 2
	Reply Code (AG14)	Reply
	E	GRAINS, TROY
	R	GRAMS
	F	OUNCES, TROY

PMLC*JPRECIOUS MATERIAL AND LOCATION

AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.

Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.

(PMLCJAUA000TEXT1234*)

Table 1
	Reply Code (MA01)	Reply
	AUA000	GOLD
	IRA000	IRIDIUM
	AZA000	OSMIUM
	PDA000	PALLADIUM
	PTA000	PLATINUM
	RHA000	RHODIUM
	RTA000	RUTHENIUM
	AGA000	SILVER

SUPP*GSUPPLEMENTARY FEATURES

CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.

Enter the reply in clear text.Separate multiple replies with a semicolon.

(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)

RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT

INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.

Enter concise statement for similar item including name and identifying data.

Reply to this MRC in accordance with Volume 3.

AGAV*GEND ITEM IDENTIFICATION

THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.

Enter the reply in clear text.

(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)

ANNY*AQUANTITY WITHIN EACH IMMEDIATE CONTAINER

THE NUMBER OF ITEMS WITHIN EACH IMMEDIATE CONTAINER.

Enter the alpha-numeric reply with a minimum of one character.

(ANNYAR5)

CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY

THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.

Enter the reply in clear text.

(CXCYGLINE PROCESSOR CONTROL BOARD*)

HZRD*DHAZARDOUS SUBSTANCES

THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.

Enter the applicable reply code from the table below

(HZRDDHAZ030)

Table 1
	Reply Code (HZ00)	Reply
	HAZ383	ACTINIUM-227
	HAZ408	CADMIUM-109
	HAZ420	CESIUM-131
	HAZ422	CESIUM-134
	HAZ429	COBALT-56
	HAZ435	CURIUM-242
	HAZ445	EUROPIUM-150
	HAZ456	GOLD-193
	HAZ464	INDIUM-113M
	HAZ468	IODINE-124
	HAZ480	IRON-55
	HAZ484	KRYPTON-85
	HAZ489	LEAD-203
	HAZ030	MAGNESIUM ALLOY
	HAZ506	NICKEL-56
	HAZ519	PLATINUM-191
	HAZ524	PLUTONIUM-238

ZZZV*GFSC APPLICATION DATA

THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.

Enter the name of the next higher classifiable assembly in clear text.

(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)

TEXT*GGENERAL CHARACTERISTICS ITEM DESCRIPTION

A RECORDING OF THE PHYSICAL,FUNCTIONAL,AND PERFORMANCE CHARACTERISTICS FOR AN ITEM OF SUPPLY.

Enter clear text.

(TEXTGCLEARTEXT)

CLQL*GCOLLOQUIAL NAME

A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.

Enter the reply in clear text.

(CLQLGWOVEN WIRE CLOTH*)