A self-contained heat transfer device which receives high pressure gas at temperatures above that of the cooling medium, to which the device passes latent heat from the refrigerant gas, thereby causing it to liquefy.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED36880*)
IF STYLE/REPLY CODE(s) ACN WERE ENTERED FOR MRC AYTS, YOU MUST ANSWER MRC (AWCD and AWGE and AWKT and AWKW and AWKZ and AWWH and CWTS and MATT)
IF STYLE/REPLY CODE(s) AAB WERE ENTERED FOR MRC AYTS, YOU MUST ANSWER MRC (AJLX and BHSN and CSBH and ABBB)
AYTSDCOOLING TYPE
INDICATES THE TYPE OF COOLING.
Enter the applicable reply code from the table below
(AYTSDAAB)
| Table 1 |
| Reply Code (AB75) | Reply |
| AAB | AIR |
| ACN | WATER |
AWCDDWATER FOR WHICH DESIGNED
THE TYPE OF WATER WITH WHICH THE ITEM IS DESIGNED TO BE USED.
Enter the applicable reply code from the table below
(AWCDDKR*;AWCDDKS$DKS*)
| Table 1 |
| Reply Code (AB75) | Reply |
| KR | FRESH |
| KS | SALT |
AWGE*APASS QUANTITY
THE NUMBER OF PASSES PROVIDED.
Enter the numeric reply with a minimum of one digit.
(AWGEA10*)
AWKT*AWATER CONNECTION QUANTITY
THE NUMBER OF WATER CONNECTIONS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(AWKTA10*)
AWKW*DWATER CONNECTION TYPE
INDICATES THE TYPE OF WATER CONNECTION/S/.
Enter the applicable reply code from the table below
(AWKWDBT*;AWKWDBW$DCB*)
| Table 1 |
| Reply Code (AB76) | Reply |
| A | ANY ACCEPTABLE |
| BD | BUTT WELD PIPE |
| BQ | COPPER TUBE |
| BR | COPPER TUBING, ENDS SEALED |
| BF | FLANGE |
| BS | FLANGE UNION |
| BT | FLANGED, ENDS SEALED |
| BW | FLARE TUBE |
| BX | PIPE |
| BZ | SWEAT FLANGE |
| BY | SWEATED TUBE |
| CA | THREAD |
| CB | THREADED PIPE |
| CC | TUBE |
| RY | TUBE COUPLING NUT |
AWKZ*GWATER CONNECTION SIZE
DESIGNATES THE SIZE OF THE WATER CONNECTION.
Enter clear text.
(AWKZGCLEARTEXT)
AWWH*JWATER SIDE TEST MINIMUM PRESSURE
THE MAXIMUM INTERNAL PRESSURE,DETERMINED BY DESTRUCTION TESTS AT WHICH THE ITEM CAN BE EXPECTED TO RUPTURE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWWHJBB2.0*)
| Table 1 |
| Reply Code (AG20) | Reply |
| AV | KILOGRAMS PER SQUARE CENTIMETER |
| BB | POUNDS PER SQUARE INCH |
CWTS*JWATER FLOW RATE
THE RATED CAPACITY OF WATER FLOW MOVED THROUGH THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWTSJCQ2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| CQ | GALLONS PER MINUTE |
| CR | LITERS PER MINUTE |
AJLX*AFAN QUANTITY
THE NUMBER OF INDIVIDUAL FANS CONTAINED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AJLXA10*)
BHSN*DDRAFT DIRECTION
THE DIRECTION OF THE AIR FLOW.
Enter the applicable reply code from the table below
(BHSNDAC*;BHSNDAH$DAE*;BHSNDAH$$DAE*)
| Table 1 |
| Reply Code (AJ69) | Reply |
| AD | AT RIGHT ANGLES |
| AE | DOWN |
| AF | HORIZONTAL |
| AH | LONGITUDINAL |
| AB | PARALLEL |
| AC | PERPENDICULAR |
| AG | UP |
IF STYLE/REPLY CODE(s) AC WERE ENTERED FOR MRC CSBH, YOU MUST ANSWER MRC (FREQ and FAAZ)
CSBH*JVOLTAGE IN VOLTS AND CURRENT TYPE
THE TOTAL ELECTRICAL VOLTAGE,EXPRESSED IN VOLTS,AND THE TYPE OF CURRENT WHETHER ALTERNATING OR DIRECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSBHJDC2.0*;CSBHJDC2.0$JDC2.0*;CSBHJDC2.0$$JDC2.1*)
| Table 1 |
| Reply Code (AN87) | Reply |
| AC | AC |
| DC | DC |
FREQ*BFREQUENCY IN HERTZ
THE CYCLES PER SECOND /HERTZ/ OF THE ALTERNATING CURRENT.
Enter a reply with a minimum of one digit on either side of the decimal point.
(FREQB2.0*;FREQB2.02.0$BM2.0*)
FAAZ*DPHASE
THE NUMBER OF ALTERNATING CURRENT PHASES.
Enter the applicable reply code from the table below
(FAAZDC*;FAAZDB$DA*)
| Table 1 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| C | THREE |
| B | TWO |
ABBB*DSPEED ADJUSTMENTS
THE DIFFERENT SPEEDS AT WHICH THE ITEM MAY BE OPERATED.
Enter the applicable reply code from the table below
(ABBBDF*;ABBBDA$DD*)
| Table 1 |
| Reply Code (AB03) | Reply |
| K | 0 TO FULL SPEED |
| E | FIVE SPEED |
| D | FOUR SPEED |
| A | SINGLE SPEED |
| F | SIX SPEED |
| C | THREE SPEED |
| B | TWO SPEED |
AWGGJCONDENSING SURFACE AREA
THE AMOUNT OF CONDENSING SURFACE AREA.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWGGJF2.0*)
| Table 1 |
| Reply Code (AC51) | Reply |
| F | SQUARE FEET |
| M | SQUARE METERS |
AAYEBREFRIGERATION FLOW RATE IN TONS PER HOUR
THE REFRIGERATION CAPACITY OF THE ITEM AS RATED BY INDUSTRY,EXPRESSED IN TONS PER HOUR.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AAYEB2.0)
ARNF*ATUBE QUANTITY
THE NUMBER OF TUBES INCLUDED ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(ARNFA10*)
AWGK*JTUBE EFFECTIVE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A TUBE BETWEEN THE INSIDE FACES OF THE TUBE SHEETS,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWGKJF2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
AWKR*JSHELL LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE SHELL,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWKRJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
AWKS*JSHELL OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE SHELL,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWKSJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AWKXAREFRIGERANT INLET CONNECTION QUANTITY
THE NUMBER OF REFRIGERANT INLET CONNECTIONS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(AWKXA10*)
AWKYDREFRIGERANT INLET CONNECTION TYPE
INDICATES THE TYPE OF REFRIGERANT INLET CONNECTION/S/.
Enter the applicable reply code from the table below
(AWKYDBS*;AWKYDBZ$DBF*)
| Table 1 |
| Reply Code (AB76) | Reply |
| A | ANY ACCEPTABLE |
| BD | BUTT WELD PIPE |
| BQ | COPPER TUBE |
| BR | COPPER TUBING, ENDS SEALED |
| BF | FLANGE |
| BS | FLANGE UNION |
| BT | FLANGED, ENDS SEALED |
| BW | FLARE TUBE |
| BX | PIPE |
| BZ | SWEAT FLANGE |
| BY | SWEATED TUBE |
| CA | THREAD |
| CB | THREADED PIPE |
| CC | TUBE |
| RY | TUBE COUPLING NUT |
AWLAGREFRIGERANT INLET CONNECTION SIZE
DESIGNATES THE SIZE OF THE REFRIGERANT INLET CONNECTION.
Enter clear text.
(AWLAGCLEARTEXT)
AWLBAREFRIGERANT OUTLET CONNECTION QUANTITY
THE NUMBER OF REFRIGERANT OUTLET CONNECTIONS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(AWLBA10*)
AWLCDREFRIGERANT OUTLET CONNECTION TYPE
INDICATES THE TYPE OF REFRIGERANT OUTLET CONNECTION/S/.
Enter the applicable reply code from the table below
(AWLCDA*;AWLCDCC$DBX*)
| Table 1 |
| Reply Code (AB76) | Reply |
| A | ANY ACCEPTABLE |
| BD | BUTT WELD PIPE |
| BQ | COPPER TUBE |
| BR | COPPER TUBING, ENDS SEALED |
| BF | FLANGE |
| BS | FLANGE UNION |
| BT | FLANGED, ENDS SEALED |
| BW | FLARE TUBE |
| BX | PIPE |
| BZ | SWEAT FLANGE |
| BY | SWEATED TUBE |
| CA | THREAD |
| CB | THREADED PIPE |
| CC | TUBE |
| RY | TUBE COUPLING NUT |
AWLDGREFRIGERANT OUTLET CONNECTION SIZE
DESIGNATES THE SIZE OF THE REFRIGERANT OUTLET CONNECTION.
Enter clear text.
(AWLDGCLEARTEXT)
AWWGJREFRIGERANT SIDE TEST MINIMUM PRESSURE
THE MAXIMUM INTERNAL PRESSURE,DETERMINED BY DESTRUCTION TESTS AT WHICH THE ITEM CAN BE EXPECTED TO RUPTURE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWWGJAV2.0*)
| Table 1 |
| Reply Code (AG20) | Reply |
| AV | KILOGRAMS PER SQUARE CENTIMETER |
| BB | POUNDS PER SQUARE INCH |
ABHPJOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMKJOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJFB2.0*;ABMKJFB2.0$$JFB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCQA)
| Table 1 |
| Reply Code (AN47) | Reply |
| CZP | CABINET |
| CQA | DRUM |
| CQB | GRID |
| CQC | INTEGRAL AUGER |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDXX)
| Table 1 |
| Reply Code (EN02) | Reply |
| XX | REVIEWED - DOES NOT MEET SOME ENAC CRITERIA |
| JU | WATER-COOLED ELECTRIC CHILLERS, COMMERCIAL - FEMP-HEATING AND COOLING - ENERGY EFFICIENT PRODUCTS |
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ066*;HZRDDHAZ076$$DHAZ078*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ070 | REFRIGERANT GAS, R 114 |
| HAZ066 | REFRIGERANT GAS, R 115 |
| HAZ078 | REFRIGERANT GAS, R 116 |
| HAZ072 | REFRIGERANT GAS, R 12 |
| HAZ068 | REFRIGERANT GAS, R 13 |
| HAZ082 | REFRIGERANT GAS, R 14 |
| HAZ076 | REFRIGERANT GAS, R 21 |
| HAZ074 | REFRIGERANT GAS, R 500 |
| HAZ064 | REFRIGERANT GAS, R 502 |
MEDADMEDIA FOR WHICH DESIGNED
THE TYPE OF MEDIA FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(MEDADACS*;MEDADAAE$DAFG*;MEDADAAE$$DAFG*)
| Table 1 |
| Reply Code (AN91) | Reply |
| AAE | AIR |
| AAH | AMMONIA, GASEOUS |
| AAJ | AMMONIA, LIQUID |
| AHF | ANTIFREEZE |
| AMR | METHYL CHLORIDE, GAS |
| AMS | METHYL CHLORIDE, LIQUID |
| ACE | OIL, HYDRAULIC |
| AMP | REFRIGERANT 11 |
| ABM | REFRIGERANT 12 |
| ABN | REFRIGERANT 13 |
| ACM | REFRIGERANT 22 |
| AMQ | REFRIGERANT VAPOR |
| AFG | REFRIGERANT, FLUOROCARBON |
| ACS | REFRIGERATION COMPOUND |
| ABP | STEAM |
| AMT | VAPOR |
| ABR | WATER |
| AGL | WATER, COLD |
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCC2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDALB000*;MATT3AEEDALB000$DCU0196*;MATT3AEEDALB000$$DCU0196*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ADW | TUBE |
| 3AEE | OVERALL |
| 3AEM | HEAD |
| 3BBP | SHELL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0706 | COPPER ALLOY 706 |
| CU0196 | COPPER ALLOY 905 |
| FEA000 | IRON |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information