An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. Items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. It may be formed to a specific shape, except round, with or without joints. It may have fabric, cord or metal reinforcement. Except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. For straight items with square end cuts and without mounting holes, slots or press-fit buttons see RUBBER STRIP. For items with round cross sections see SEAL, NONMETALLIC ROUND SECTION. Excludes:GASKET and PACKING, PREFORMED.
ISAC Reply 3ABK added to MRC MATT.
ISAC Reply 3ACN added to MRC MATT.
ISAC Reply 3ADD added to MRC MATT.
ISAC Reply 3ADM added to MRC MATT.
ISAC Reply 3ADP added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AFG added to MRC MATT.
ISAC Reply 3AFJ added to MRC MATT.
ISAC Reply 3ALJ added to MRC MATT.
ISAC Reply 3AVP added to MRC MATT.
ISAC Reply 3AVQ added to MRC MATT.
ISAC Reply 3BCL added to MRC MATT.
ISAC Reply 3CEP added to MRC MATT.
ISAC Reply 3CMA added to MRC MATT.
ISAC Reply 3DFV added to MRC MATT.
ISAC Reply 3DLQ added to MRC MATT.
ISAC Reply 3DLS added to MRC MATT.
ISAC Reply 3DLT added to MRC MATT.
ISAC Reply 3DLU added to MRC MATT.
ISAC Reply 3DLV added to MRC MATT.
ISAC Reply 3DLY added to MRC MATT.
ISAC Reply 3DMI added to MRC MATT.
ISAC Reply 3DMJ added to MRC MATT.
ISAC Reply 3DML added to MRC MATT.
ISAC Reply 3DMM added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 2AA deleted from MRC MATT.
ISAC Reply 2AB deleted from MRC MATT.
ISAC Reply 2AC deleted from MRC MATT.
ISAC Reply 2AD deleted from MRC MATT.
ISAC Reply 2AE deleted from MRC MATT.
ISAC Reply 2AF deleted from MRC MATT.
ISAC Reply 2AG deleted from MRC MATT.
ISAC Reply 2AH deleted from MRC MATT.
ISAC Reply 2AJ deleted from MRC MATT.
ISAC Reply 2AK deleted from MRC MATT.
ISAC Reply 2AL deleted from MRC MATT.
ISAC Reply 2AM deleted from MRC MATT.
ISAC Reply 2AN deleted from MRC MATT.
ISAC Reply 2AP deleted from MRC MATT.
ISAC Reply 2AQ deleted from MRC MATT.
ISAC Reply 2AR deleted from MRC MATT.
ISAC Reply 2AS deleted from MRC MATT.
ISAC Reply 2AT deleted from MRC MATT.
ISAC Reply 2AU deleted from MRC MATT.
ISAC Reply 2AV deleted from MRC MATT.
ISAC Reply 2AW deleted from MRC MATT.
ISAC Reply 2AX deleted from MRC MATT.
ISAC Reply 2AY deleted from MRC MATT.
ISAC Reply 2AZ deleted from MRC MATT.
ISAC Reply 2BA deleted from MRC MATT.
ISAC Reply 2BB deleted from MRC MATT.
ISAC Reply 2BC deleted from MRC MATT.
ISAC Reply 2BD deleted from MRC MATT.
ISAC Reply 2BE deleted from MRC MATT.
ISAC Reply 2BF deleted from MRC MATT.
ISAC Reply 2BG deleted from MRC MATT.
ISAC Reply 2BH deleted from MRC MATT.
ISAC Reply 2BJ deleted from MRC MATT.
ISAC Reply 2BK deleted from MRC MATT.
ISAC Reply 2BL deleted from MRC MATT.
ISAC Reply 2BM deleted from MRC MATT.
ISAC Reply 2BN deleted from MRC MATT.
ISAC Reply 2BP deleted from MRC MATT.
ISAC Reply 2BQ deleted from MRC MATT.
ISAC Reply 2BR deleted from MRC MATT.
ISAC Reply 2BS deleted from MRC MATT.
ISAC Reply 2BT deleted from MRC MATT.
ISAC Reply 2BU deleted from MRC MATT.
ISAC Reply 2BV deleted from MRC MATT.
ISAC Reply 2BW deleted from MRC MATT.
ISAC Reply 2BX deleted from MRC MATT.
ISAC Reply 2BY deleted from MRC MATT.
ISAC Reply 2BZ deleted from MRC MATT.
ISAC Reply 2CA deleted from MRC MATT.
ISAC Reply 2CB deleted from MRC MATT.
ISAC Reply 2CC deleted from MRC MATT.
ISAC Reply 2CD deleted from MRC MATT.
ISAC Reply 2CE deleted from MRC MATT.
ISAC Reply 2CF deleted from MRC MATT.
ISAC Reply 2CG deleted from MRC MATT.
ISAC Reply 3ABK added to MRC MDCL.
ISAC Reply 3ACN added to MRC MDCL.
ISAC Reply 3ADD added to MRC MDCL.
ISAC Reply 3ADM added to MRC MDCL.
ISAC Reply 3ADP added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3AFG added to MRC MDCL.
ISAC Reply 3AFJ added to MRC MDCL.
ISAC Reply 3ALJ added to MRC MDCL.
ISAC Reply 3AVP added to MRC MDCL.
ISAC Reply 3AVQ added to MRC MDCL.
ISAC Reply 3BCL added to MRC MDCL.
ISAC Reply 3CEP added to MRC MDCL.
ISAC Reply 3CMA added to MRC MDCL.
ISAC Reply 3DFV added to MRC MDCL.
ISAC Reply 3DLQ added to MRC MDCL.
ISAC Reply 3DLS added to MRC MDCL.
ISAC Reply 3DLT added to MRC MDCL.
ISAC Reply 3DLU added to MRC MDCL.
ISAC Reply 3DLV added to MRC MDCL.
ISAC Reply 3DLY added to MRC MDCL.
ISAC Reply 3DMI added to MRC MDCL.
ISAC Reply 3DMJ added to MRC MDCL.
ISAC Reply 3DML added to MRC MDCL.
ISAC Reply 3DMM added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 2AA deleted from MRC MDCL.
ISAC Reply 2AB deleted from MRC MDCL.
ISAC Reply 2AC deleted from MRC MDCL.
ISAC Reply 2AD deleted from MRC MDCL.
ISAC Reply 2AE deleted from MRC MDCL.
ISAC Reply 2AF deleted from MRC MDCL.
ISAC Reply 2AG deleted from MRC MDCL.
ISAC Reply 2AH deleted from MRC MDCL.
ISAC Reply 2AJ deleted from MRC MDCL.
ISAC Reply 2AK deleted from MRC MDCL.
ISAC Reply 2AL deleted from MRC MDCL.
ISAC Reply 2AM deleted from MRC MDCL.
ISAC Reply 2AN deleted from MRC MDCL.
ISAC Reply 2AP deleted from MRC MDCL.
ISAC Reply 2AQ deleted from MRC MDCL.
ISAC Reply 2AR deleted from MRC MDCL.
ISAC Reply 2AS deleted from MRC MDCL.
ISAC Reply 2AT deleted from MRC MDCL.
ISAC Reply 2AU deleted from MRC MDCL.
ISAC Reply 2AV deleted from MRC MDCL.
ISAC Reply 2AW deleted from MRC MDCL.
ISAC Reply 2AX deleted from MRC MDCL.
ISAC Reply 2AY deleted from MRC MDCL.
ISAC Reply 2AZ deleted from MRC MDCL.
ISAC Reply 2BA deleted from MRC MDCL.
ISAC Reply 2BB deleted from MRC MDCL.
ISAC Reply 2BC deleted from MRC MDCL.
ISAC Reply 2BD deleted from MRC MDCL.
ISAC Reply 2BE deleted from MRC MDCL.
ISAC Reply 2BF deleted from MRC MDCL.
ISAC Reply 2BG deleted from MRC MDCL.
ISAC Reply 2BH deleted from MRC MDCL.
ISAC Reply 2BJ deleted from MRC MDCL.
ISAC Reply 2BK deleted from MRC MDCL.
ISAC Reply 2BL deleted from MRC MDCL.
ISAC Reply 2BM deleted from MRC MDCL.
ISAC Reply 2BN deleted from MRC MDCL.
ISAC Reply 2BP deleted from MRC MDCL.
ISAC Reply 2BQ deleted from MRC MDCL.
ISAC Reply 2BR deleted from MRC MDCL.
ISAC Reply 2BS deleted from MRC MDCL.
ISAC Reply 2BT deleted from MRC MDCL.
ISAC Reply 2BU deleted from MRC MDCL.
ISAC Reply 2BV deleted from MRC MDCL.
ISAC Reply 2BW deleted from MRC MDCL.
ISAC Reply 2BX deleted from MRC MDCL.
ISAC Reply 2BY deleted from MRC MDCL.
ISAC Reply 2BZ deleted from MRC MDCL.
ISAC Reply 2CA deleted from MRC MDCL.
ISAC Reply 2CB deleted from MRC MDCL.
ISAC Reply 2CC deleted from MRC MDCL.
ISAC Reply 2CD deleted from MRC MDCL.
ISAC Reply 2CE deleted from MRC MDCL.
ISAC Reply 2CF deleted from MRC MDCL.
ISAC Reply 2CG deleted from MRC MDCL.
ISAC Reply 3AEE added to MRC CQFM.
ISAC Reply 3BCL added to MRC CQFM.
ISAC Reply 3CMA added to MRC CQFM.
ISAC Reply 3DLS added to MRC CQFM.
ISAC Reply 3DLV added to MRC CQFM.
ISAC Reply 3HOU added to MRC CQFM.
ISAC Reply 2AA deleted from MRC CQFM.
ISAC Reply 2AB deleted from MRC CQFM.
ISAC Reply 2AC deleted from MRC CQFM.
ISAC Reply 2AD deleted from MRC CQFM.
ISAC Reply 2AE deleted from MRC CQFM.
ISAC Reply 2AF deleted from MRC CQFM.
ISAC Reply 2AG deleted from MRC CQFM.
ISAC Reply 2AH deleted from MRC CQFM.
ISAC Reply 2AJ deleted from MRC CQFM.
ISAC Reply 2AK deleted from MRC CQFM.
ISAC Reply 2AL deleted from MRC CQFM.
ISAC Reply 2AM deleted from MRC CQFM.
ISAC Reply 2AN deleted from MRC CQFM.
ISAC Reply 2AP deleted from MRC CQFM.
ISAC Reply 2AQ deleted from MRC CQFM.
ISAC Reply 2AR deleted from MRC CQFM.
ISAC Reply 2AS deleted from MRC CQFM.
ISAC Reply 2AT deleted from MRC CQFM.
ISAC Reply 2AU deleted from MRC CQFM.
ISAC Reply 2AV deleted from MRC CQFM.
ISAC Reply 2AW deleted from MRC CQFM.
ISAC Reply 2AX deleted from MRC CQFM.
ISAC Reply 2AY deleted from MRC CQFM.
ISAC Reply 2AZ deleted from MRC CQFM.
ISAC Reply 2BA deleted from MRC CQFM.
ISAC Reply 2BB deleted from MRC CQFM.
ISAC Reply 2BC deleted from MRC CQFM.
ISAC Reply 2BD deleted from MRC CQFM.
ISAC Reply 2BE deleted from MRC CQFM.
ISAC Reply 2BF deleted from MRC CQFM.
ISAC Reply 2BG deleted from MRC CQFM.
ISAC Reply 2BH deleted from MRC CQFM.
ISAC Reply 2BJ deleted from MRC CQFM.
ISAC Reply 2BK deleted from MRC CQFM.
ISAC Reply 2BL deleted from MRC CQFM.
ISAC Reply 2BM deleted from MRC CQFM.
ISAC Reply 2BN deleted from MRC CQFM.
ISAC Reply 2BP deleted from MRC CQFM.
ISAC Reply 2BQ deleted from MRC CQFM.
ISAC Reply 2BR deleted from MRC CQFM.
ISAC Reply 2BS deleted from MRC CQFM.
ISAC Reply 2BT deleted from MRC CQFM.
ISAC Reply 2BU deleted from MRC CQFM.
ISAC Reply 2BV deleted from MRC CQFM.
ISAC Reply 2BW deleted from MRC CQFM.
ISAC Reply 2BX deleted from MRC CQFM.
ISAC Reply 2BY deleted from MRC CQFM.
ISAC Reply 2BZ deleted from MRC CQFM.
ISAC Reply 2CA deleted from MRC CQFM.
ISAC Reply 2CB deleted from MRC CQFM.
ISAC Reply 2CC deleted from MRC CQFM.
ISAC Reply 2CD deleted from MRC CQFM.
ISAC Reply 2CE deleted from MRC CQFM.
ISAC Reply 2CF deleted from MRC CQFM.
ISAC Reply 2CG deleted from MRC CQFM.
ISAC Reply 3AEE added to MRC AAGR.
ISAC Reply 3HOU added to MRC AAGR.
ISAC Reply 3AEE added to MRC ADTM.
ISAC Reply 3DMB added to MRC ADTM.
ISAC Reply 3HOU added to MRC ADTM.
ISAC Reply 3AEE added to MRC ADTQ.
ISAC Reply 3DMB added to MRC ADTQ.
ISAC Reply 3HOU added to MRC ADTQ.
ISAC Reply 2AA deleted from MRC ADTQ.
ISAC Reply 2AB deleted from MRC ADTQ.
ISAC Reply 2AC deleted from MRC ADTQ.
ISAC Reply 2AD deleted from MRC ADTQ.
ISAC Reply 2AE deleted from MRC ADTQ.
ISAC Reply 2AF deleted from MRC ADTQ.
ISAC Reply 2AG deleted from MRC ADTQ.
ISAC Reply 2AH deleted from MRC ADTQ.
ISAC Reply 2AJ deleted from MRC ADTQ.
ISAC Reply 2AK deleted from MRC ADTQ.
ISAC Reply 2AL deleted from MRC ADTQ.
ISAC Reply 2AM deleted from MRC ADTQ.
ISAC Reply 2AN deleted from MRC ADTQ.
ISAC Reply 2AP deleted from MRC ADTQ.
ISAC Reply 2AQ deleted from MRC ADTQ.
ISAC Reply 2AR deleted from MRC ADTQ.
ISAC Reply 2AS deleted from MRC ADTQ.
ISAC Reply 2AT deleted from MRC ADTQ.
ISAC Reply 2AU deleted from MRC ADTQ.
ISAC Reply 2AV deleted from MRC ADTQ.
ISAC Reply 2AW deleted from MRC ADTQ.
ISAC Reply 2AX deleted from MRC ADTQ.
ISAC Reply 2AY deleted from MRC ADTQ.
ISAC Reply 2AZ deleted from MRC ADTQ.
ISAC Reply 2BA deleted from MRC ADTQ.
ISAC Reply 2BB deleted from MRC ADTQ.
ISAC Reply 2BC deleted from MRC ADTQ.
ISAC Reply 2BD deleted from MRC ADTQ.
ISAC Reply 2BE deleted from MRC ADTQ.
ISAC Reply 2BF deleted from MRC ADTQ.
ISAC Reply 2BG deleted from MRC ADTQ.
ISAC Reply 2BH deleted from MRC ADTQ.
ISAC Reply 2BJ deleted from MRC ADTQ.
ISAC Reply 2BK deleted from MRC ADTQ.
ISAC Reply 2BL deleted from MRC ADTQ.
ISAC Reply 2BM deleted from MRC ADTQ.
ISAC Reply 2BN deleted from MRC ADTQ.
ISAC Reply 2BP deleted from MRC ADTQ.
ISAC Reply 2BQ deleted from MRC ADTQ.
ISAC Reply 2BR deleted from MRC ADTQ.
ISAC Reply 2BS deleted from MRC ADTQ.
ISAC Reply 2BT deleted from MRC ADTQ.
ISAC Reply 2BU deleted from MRC ADTQ.
ISAC Reply 2BV deleted from MRC ADTQ.
ISAC Reply 2BW deleted from MRC ADTQ.
ISAC Reply 2BX deleted from MRC ADTQ.
ISAC Reply 2BY deleted from MRC ADTQ.
ISAC Reply 2BZ deleted from MRC ADTQ.
ISAC Reply 2CA deleted from MRC ADTQ.
ISAC Reply 2CB deleted from MRC ADTQ.
ISAC Reply 2CC deleted from MRC ADTQ.
ISAC Reply 2CD deleted from MRC ADTQ.
ISAC Reply 2CE deleted from MRC ADTQ.
ISAC Reply 2CF deleted from MRC ADTQ.
ISAC Reply 2CG deleted from MRC ADTQ.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED36874*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3CEPDWL0065*;MATT3CEPDWL0065$DCU0249*;MATT3CEPDWL0065$$DCU0249*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABK | TOP |
| 3ACN | CORE |
| 3ADD | INSERT |
| 3ADM | OUTER RING |
| 3ADP | RETAINER |
| 3AEE | OVERALL |
| 3AFG | BOTH SIDES |
| 3AFJ | ONE SIDE |
| 3ALJ | BOTTOM |
| 3AVP | INTERNAL |
| 3AVQ | EXTERNAL |
| 3BCL | BACKING |
| 3CEP | CASE |
| 3CMA | JACKET |
| 3DFV | INNER RING |
| 3DLQ | BOTTOM RING |
| 3DLS | INTERNALLY MOLDED-IN REINFORCEMENT |
| 3DLT | OPPOSITE SIDE |
| 3DLU | PACKING |
| 3DLV | SEALING ELEMENT |
| 3DLY | SPREADER |
| 3DMI | EMI/RFI CONDUCTOR |
| 3DMJ | ENVIRONMENTAL SEAL |
| 3DML | STRENGTHENING FEATURE |
| 3DMM | FIRST INTERMEDIATE RING |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ADA000 | ADHESIVE |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL1100 | ALUMINUM ALLOY 1100 |
| AL1145 | ALUMINUM ALLOY 1145 |
| AL1230 | ALUMINUM ALLOY 1230 |
| AL1235 | ALUMINUM ALLOY 1235 |
| AL2011 | ALUMINUM ALLOY 2011 |
| AL2014 | ALUMINUM ALLOY 2014 |
| AL2017 | ALUMINUM ALLOY 2017 |
| AL2020 | ALUMINUM ALLOY 2020 |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL0034 | ALUMINUM ALLOY 208.0 |
| AL0213 | ALUMINUM ALLOY 213.0 |
| AL0038 | ALUMINUM ALLOY 222.0 |
| AL0039 | ALUMINUM ALLOY 242.0 |
| AL0025 | ALUMINUM ALLOY 295.0 |
| AL3003 | ALUMINUM ALLOY 3003 |
| AL0308 | ALUMINUM ALLOY 308.0 |
| AL0035 | ALUMINUM ALLOY 319.0 |
| AL0036 | ALUMINUM ALLOY 328.0 |
| AL0333 | ALUMINUM ALLOY 333.0 |
| AL0045 | ALUMINUM ALLOY 355.0 |
| AL0046 | ALUMINUM ALLOY 356.0 |
| AL0077 | ALUMINUM ALLOY 356.2 |
| AL0051 | ALUMINUM ALLOY 357.0 |
| AL0029 | ALUMINUM ALLOY 360.0 |
| AL0031 | ALUMINUM ALLOY 380.0 |
| AL0054 | ALUMINUM ALLOY 383.0 |
| AL0032 | ALUMINUM ALLOY 384.0 |
| AL0085 | ALUMINUM ALLOY 393.1 |
| AL0027 | ALUMINUM ALLOY 413.0 |
| AL0044 | ALUMINUM ALLOY 443.0 |
| AL5052 | ALUMINUM ALLOY 5052 |
| AL5056 | ALUMINUM ALLOY 5056 |
| AL5083 | ALUMINUM ALLOY 5083 |
| AL5086 | ALUMINUM ALLOY 5086 |
| AL0026 | ALUMINUM ALLOY 514.0 |
| AL0050 | ALUMINUM ALLOY 518.0 |
| AL0043 | ALUMINUM ALLOY 520.0 |
| AL0059 | ALUMINUM ALLOY 535.0 |
| AL5454 | ALUMINUM ALLOY 5454 |
| AL5456 | ALUMINUM ALLOY 5456 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL6062 | ALUMINUM ALLOY 6062 |
| AL6063 | ALUMINUM ALLOY 6063 |
| AL6162 | ALUMINUM ALLOY 6162 |
| AL0047 | ALUMINUM ALLOY 705.0 |
| AL0048 | ALUMINUM ALLOY 707.0 |
| AL7072 | ALUMINUM ALLOY 7072 |
| AL7075 | ALUMINUM ALLOY 7075 |
| AL0049 | ALUMINUM ALLOY 713.0 |
| AL7178 | ALUMINUM ALLOY 7178 |
| AL0771 | ALUMINUM ALLOY 771.0 |
| AL8280 | ALUMINUM ALLOY 8280 |
| AL0850 | ALUMINUM ALLOY 850.0 |
| AL0063 | ALUMINUM ALLOY A332.0 |
| AL0002 | ALUMINUM ALLOY A356.0 |
| AL0052 | ALUMINUM ALLOY A360.0 |
| AL0028 | ALUMINUM ALLOY A380.0 |
| AL0030 | ALUMINUM ALLOY A413.0 |
| AL0064 | ALUMINUM ALLOY A514.0 |
| AL0042 | ALUMINUM ALLOY A712.0 |
| AL0061 | ALUMINUM ALLOY A850.0 |
| AL0273 | ALUMINUM ALLOY AL-CU4 MG TI |
| AL0040 | ALUMINUM ALLOY B295.0 |
| AL0033 | ALUMINUM ALLOY B443.0 |
| AL0041 | ALUMINUM ALLOY B514.0 |
| AL0062 | ALUMINUM ALLOY B850.0 |
| AL0060 | ALUMINUM ALLOY C355.0 |
| AL0008 | ALUMINUM ALLOY C443.0 |
| AL0024 | ALUMINUM ALLOY D712.0 |
| AL0066 | ALUMINUM ALLOY F332.0 |
| ASA000 | ASBESTOS |
| ASB000 | ASBESTOS CHRYSOTILE |
| ASC000 | ASBESTOS CROCIDOLITE |
| MSD000 | ASPHALT |
| WXB000 | BEESWAX |
| CDA000 | CADMIUM |
| CAA000 | CALCIUM SILICATE |
| CNA000 | CARBON |
| CNB000 | CARBON GRAPHITE |
| CSA000 | CELLULOSE |
| CXB000 | CEMENT PORTLAND |
| CLD000 | CERAMIC |
| CLF000 | CERAMIC ALUMINA (USE ALUMINUM OXIDE) |
| MSW000 | CHLORITE |
| CRA000 | CHROMIUM |
| CTB000 | COBALT ALLOY |
| CT0004 | COBALT COMP 6 |
| CT0015 | COBALT COMP HS188 |
| CT0001 | COBALT COMP L-605 |
| CT0008 | COBALT COMP VF-7 |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0059 | COPPER ALLOY 101 |
| CU0249 | COPPER ALLOY 102 |
| CU0282 | COPPER ALLOY 103 |
| CU0286 | COPPER ALLOY 104 |
| CU0287 | COPPER ALLOY 105 |
| CU0288 | COPPER ALLOY 107 |
| CU0283 | COPPER ALLOY 108 |
| CU0063 | COPPER ALLOY 110 |
| CU0064 | COPPER ALLOY 111 |
| CU0289 | COPPER ALLOY 113 |
| CU0290 | COPPER ALLOY 114 |
| CU0291 | COPPER ALLOY 116 |
| CU0247 | COPPER ALLOY 120 |
| CU0323 | COPPER ALLOY 121 |
| CU0248 | COPPER ALLOY 122 |
| CU0292 | COPPER ALLOY 123 |
| CU0278 | COPPER ALLOY 125 |
| CU0324 | COPPER ALLOY 127 |
| CU0326 | COPPER ALLOY 128 |
| CU0315 | COPPER ALLOY 130 |
| CU0293 | COPPER ALLOY 141-CANCELED |
| CU0279 | COPPER ALLOY 142 |
| CU0281 | COPPER ALLOY 145 |
| CU0284 | COPPER ALLOY 147 |
| CU0329 | COPPER ALLOY 150 |
| CU0068 | COPPER ALLOY 170 |
| CU0069 | COPPER ALLOY 172 |
| CU0265 | COPPER ALLOY 175 |
| CU0336 | COPPER ALLOY 176 |
| CU0317 | COPPER ALLOY 184 |
| CU0280 | COPPER ALLOY 187 |
| CU0264 | COPPER ALLOY 220 |
| CU0074 | COPPER ALLOY 230 |
| CU0076 | COPPER ALLOY 240 |
| CU0079 | COPPER ALLOY 260 |
| CU0319 | COPPER ALLOY 261 |
| CU0304 | COPPER ALLOY 262 |
| CU0080 | COPPER ALLOY 268 |
| CU0081 | COPPER ALLOY 270 |
| CU0272 | COPPER ALLOY 272 |
| CU0274 | COPPER ALLOY 274 |
| CU0302 | COPPER ALLOY 280 |
| CU0330 | COPPER ALLOY 330 |
| CU0305 | COPPER ALLOY 331 |
| CU0332 | COPPER ALLOY 332 |
| CU0335 | COPPER ALLOY 335 |
| CU0340 | COPPER ALLOY 340 |
| CU0088 | COPPER ALLOY 342 |
| CU0306 | COPPER ALLOY 344 |
| CU0307 | COPPER ALLOY 345 |
| CU0308 | COPPER ALLOY 347 |
| CU0309 | COPPER ALLOY 348 |
| CU0310 | COPPER ALLOY 350 |
| CU0089 | COPPER ALLOY 353 |
| CU0090 | COPPER ALLOY 356 |
| CU0091 | COPPER ALLOY 360 |
| CU0370 | COPPER ALLOY 370 |
| CU0092 | COPPER ALLOY 377 |
| CU0098 | COPPER ALLOY 462 |
| CU0099 | COPPER ALLOY 464 |
| CU0465 | COPPER ALLOY 465 |
| CU0466 | COPPER ALLOY 466 |
| CU0467 | COPPER ALLOY 467 |
| CU0100 | COPPER ALLOY 482 |
| CU0101 | COPPER ALLOY 485 |
| CU0103 | COPPER ALLOY 510 |
| CU0104 | COPPER ALLOY 511 |
| CU0105 | COPPER ALLOY 521 |
| CU0107 | COPPER ALLOY 532-CANCELED |
| CU0109 | COPPER ALLOY 544 |
| CU0111 | COPPER ALLOY 606 |
| CU0114 | COPPER ALLOY 613 |
| CU0115 | COPPER ALLOY 614 |
| CU0119 | COPPER ALLOY 623 |
| CU0624 | COPPER ALLOY 624 |
| CU0122 | COPPER ALLOY 630 |
| CU0632 | COPPER ALLOY 632 |
| CU0123 | COPPER ALLOY 637-CANCELED |
| CU0127 | COPPER ALLOY 642 |
| CU0131 | COPPER ALLOY 655 |
| CU0670 | COPPER ALLOY 670 |
| CU0673 | COPPER ALLOY 673 |
| CU0674 | COPPER ALLOY 674 |
| CU0675 | COPPER ALLOY 675 |
| CU0706 | COPPER ALLOY 706 |
| CU0294 | COPPER ALLOY 710 |
| CU0715 | COPPER ALLOY 715 |
| CU0148 | COPPER ALLOY 745 |
| CU0150 | COPPER ALLOY 752 |
| CU0152 | COPPER ALLOY 764 |
| CU0157 | COPPER ALLOY 770 |
| CU0161 | COPPER ALLOY 792 |
| CU0801 | COPPER ALLOY 801 |
| CU0166 | COPPER ALLOY 820 |
| CU0167 | COPPER ALLOY 824 |
| CU0168 | COPPER ALLOY 825 |
| CU0169 | COPPER ALLOY 826 |
| CU0170 | COPPER ALLOY 827 |
| CU0171 | COPPER ALLOY 828 |
| CU0172 | COPPER ALLOY 836 |
| CU0173 | COPPER ALLOY 838 |
| CU0174 | COPPER ALLOY 842 |
| CU0175 | COPPER ALLOY 844 |
| CU0176 | COPPER ALLOY 848 |
| CU0177 | COPPER ALLOY 852 |
| CU0178 | COPPER ALLOY 854 |
| CU0179 | COPPER ALLOY 855 |
| CU0180 | COPPER ALLOY 857 |
| CU0181 | COPPER ALLOY 861 |
| CU0182 | COPPER ALLOY 862 |
| CU0183 | COPPER ALLOY 863 |
| CU0184 | COPPER ALLOY 864 |
| CU0185 | COPPER ALLOY 865 |
| CU0186 | COPPER ALLOY 868 |
| CU0187 | COPPER ALLOY 872 |
| CU0188 | COPPER ALLOY 874 |
| CU0195 | COPPER ALLOY 903 |
| CU0196 | COPPER ALLOY 905 |
| CU0197 | COPPER ALLOY 907 |
| CU0198 | COPPER ALLOY 910 |
| CU0199 | COPPER ALLOY 913 |
| CU0200 | COPPER ALLOY 915-CANCELED |
| CU0201 | COPPER ALLOY 916 |
| CU0202 | COPPER ALLOY 922 |
| CU0203 | COPPER ALLOY 923 |
| CU0204 | COPPER ALLOY 925 |
| CU0205 | COPPER ALLOY 927 |
| CU0928 | COPPER ALLOY 928 |
| CU0206 | COPPER ALLOY 932 |
| CU0207 | COPPER ALLOY 934 |
| CU0208 | COPPER ALLOY 935 |
| CU0209 | COPPER ALLOY 937 |
| CU0210 | COPPER ALLOY 938 |
| CU0211 | COPPER ALLOY 939 |
| CU0212 | COPPER ALLOY 940 |
| CU0213 | COPPER ALLOY 941 |
| CU0214 | COPPER ALLOY 943 |
| CU0945 | COPPER ALLOY 945 |
| CU0215 | COPPER ALLOY 947 |
| CU0216 | COPPER ALLOY 948 |
| CU0217 | COPPER ALLOY 952 |
| CU0218 | COPPER ALLOY 953 |
| CU0219 | COPPER ALLOY 954 |
| CU0220 | COPPER ALLOY 955 |
| CU0221 | COPPER ALLOY 957 |
| CU0222 | COPPER ALLOY 958 |
| CU0223 | COPPER ALLOY 962 |
| CU0224 | COPPER ALLOY 964 |
| CU1181 | COPPER ALLOY UNS C63200 |
| CU1156 | COPPER ALLOY UNS C79200 |
| CKA000 | CORK |
| CCA000 | COTTON |
| LBF000 | DISULFIDE MOLYBDENUM |
| FBA000 | FIBER |
| FBY000 | FIBER NONASBESTOS |
| WDA000 | FIBERBOARD |
| FBT000 | FLAX |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| ADB000 | GLUE |
| MSB000 | GLYCERIN |
| GFA000 | GRAPHITE |
| LBC000 | GREASE |
| HRE000 | HAIR |
| FBL000 | HEMP |
| MTAA00 | INDIUM |
| FEA000 | IRON |
| FEF000 | IRON ALLOY |
| FE0019 | IRON ALLOY 660 |
| FE0105 | IRON ALLOY UNS K93600 |
| FEB000 | IRON CAST |
| FE0044 | IRON CAST UNS F11401 |
| FE0045 | IRON CAST UNS F11701 |
| FE0046 | IRON CAST UNS F12101 |
| FE0052 | IRON CAST UNS F12401 |
| FE0047 | IRON CAST UNS F12801 |
| FE0048 | IRON CAST UNS F13101 |
| FE0049 | IRON CAST UNS F13501 |
| FE0050 | IRON CAST UNS F13801 |
| FE0051 | IRON CAST UNS F14101 |
| FE0061 | IRON CAST UNS F32800 |
| FE0065 | IRON CAST UNS F33100 |
| FE0080 | IRON CAST UNS F33101 |
| FE0066 | IRON CAST UNS F33800 |
| FE0067 | IRON CAST UNS F34800 |
| FE0068 | IRON CAST UNS F36200 |
| FEC000 | IRON MALLEABLE |
| FBK000 | JUTE |
| PBA000 | LEAD |
| PBB000 | LEAD ALLOY |
| LRA000 | LEATHER |
| LRE000 | LEATHER ARTIFICIAL |
| LRG000 | LEATHER CATTLEHIDE |
| LRD000 | LEATHER KIDSKIN |
| MGA000 | MAGNESIUM |
| MGB000 | MAGNESIUM ALLOY |
| MG0001 | MAGNESIUM ALLOY AZ31B |
| MG0008 | MAGNESIUM ALLOY AZ91C |
| MSR000 | MAGNESIUM SILICATE |
| AYA000 | MICA |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| NL0042 | NICKEL ALLOY 201 |
| NL0008 | NICKEL ALLOY 400 |
| NL0019 | NICKEL ALLOY 502 |
| NL0009 | NICKEL ALLOY 600 |
| NL0012 | NICKEL ALLOY 625 |
| NL0010 | NICKEL ALLOY 718 |
| NL0018 | NICKEL ALLOY K-500 |
| NL0017 | NICKEL ALLOY R-405 |
| NL0052 | NICKEL ALLOY RA-333 |
| NL0096 | NICKEL ALLOY UNS N06002 |
| NL0099 | NICKEL ALLOY UNS N10001 |
| NL0100 | NICKEL ALLOY UNS N10002 |
| NL0007 | NICKEL ALLOY X-750 |
| LBD000 | OIL |
| LBB000 | OIL CASTOR |
| LBA000 | OIL LUBRICATING |
| LBE000 | OIL MINERAL |
| PDA000 | PALLADIUM |
| PPA000 | PAPER |
| LBJ000 | PETROLATUM |
| PCA000 | PLASTIC |
| PCB000 | PLASTIC ACETAL |
| PCD000 | PLASTIC ACRYLIC |
| PCAX00 | PLASTIC ACRYLONITRILE |
| PCBL00 | PLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) |
| PCDD00 | PLASTIC ALKANE-IMIDE |
| PCE000 | PLASTIC ALKYD |
| PCF000 | PLASTIC ALLYL |
| PCCX00 | PLASTIC ARAMID |
| PCCY00 | PLASTIC AROMATIC POLYAMIDE |
| PCDA00 | PLASTIC AROMATIC POLYIMIDE |
| PCAN00 | PLASTIC CELLULOSE ACETATE |
| PCBN00 | PLASTIC CELLULOSE ACETATE BUTYRATE |
| PCBJ00 | PLASTIC CELLULOSE NITRATE |
| PCAAB0 | PLASTIC CELLULOSE TRIACETATE |
| PCH000 | PLASTIC EPOXY |
| PCBY00 | PLASTIC ETHYL CELLULOSE |
| PCBR00 | PLASTIC FLUORINATED ETHYLENE PROPYLENE |
| PCAAD0 | PLASTIC FLUOROCARBON |
| PCCG00 | PLASTIC HEXAFLOROPROPYLENE |
| PCJ000 | PLASTIC MELAMINE |
| PCK000 | PLASTIC METHYL METHACRYLATE |
| PCM000 | PLASTIC PHENOL FORMALDEHYDE (PMO) |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCQ000 | PLASTIC POLYCAPROLACTAM |
| PCR000 | PLASTIC POLYCARBONATE |
| PCT000 | PLASTIC POLYCHLOROTRIFLUOROETHYLENE |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE (PET) |
| PCDJ00 | PLASTIC POLYFORMALDEHYDE |
| PCZ000 | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE |
| PCAM00 | PLASTIC POLYHEXAMETHYLENE AMIDE |
| PCAA00 | PLASTIC POLYHEXAMETHYLENE SEBACAMIDE |
| PCCH00 | PLASTIC POLYIMIDE |
| PCAB00 | PLASTIC POLYOLEFIN |
| PCAAAA | PLASTIC POLYPHENYLENE OXIDE |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAD00 | PLASTIC POLYSTYRENE |
| PCAE00 | PLASTIC POLYSULFONE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAR00 | PLASTIC POLYTRIFLUOROETHYLENE |
| PCAAAB | PLASTIC POLYUNDECANOAMIDE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCBM00 | PLASTIC POLYVINYL ACETATE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCCC00 | PLASTIC POLYVINYL CHLORIDE-ACETATE |
| PCBW00 | PLASTIC POLYVINYLIDENE |
| PCBG00 | PLASTIC POLYVINYLIDENE CHLORIDE |
| PCAK00 | PLASTIC SILICONE |
| PCBC00 | PLASTIC STYRENE |
| PCAW00 | PLASTIC TETRAFLUOROETHYLENE |
| PCBA00 | PLASTIC URETHANE |
| PCAP00 | PLASTIC VINYL |
| WDB000 | PLYWOOD |
| WDM000 | PRESSBOARD |
| FBW000 | RAMIE |
| LRL000 | RAWHIDE |
| RSC000 | RESIN NATURAL |
| RSB000 | RESIN SILICONE |
| RSA000 | RESIN SYNTHETIC |
| RCE000 | RUBBER |
| RC0024 | RUBBER BUTADIENE CLASS BR |
| RCAD00 | RUBBER BUTADIENE NITRILE |
| RC0019 | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| RC0022 | RUBBER BUTADIENE-STYRENE CLASS SBR |
| RCT000 | RUBBER BUTYL |
| RC0034 | RUBBER CARBOXYLIC-NITRILE-BUTADIENE CLASS XNBR |
| RC0033 | RUBBER CARBOXYLIC-STYRENE-BUTADIENE CLASS XSBR |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RC0006 | RUBBER CHLOROSULFONATED POLYETHYLENE CLASS CSM |
| RC0005 | RUBBER EPICHLOROHYDRIN HOMOPOLYMER CLASS CO |
| RC0008 | RUBBER EPICHLOROHYDRIN-ETHYLENE OXIDE CLASS ECO |
| RC0009 | RUBBER ETHYLENE-PROPYLENE CLASS EPM |
| RC0010 | RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM |
| RC0013 | RUBBER FLUOROCARBON CLASS FPM |
| RCAE00 | RUBBER FLUOROPHOSPHONITRILIC |
| RC0014 | RUBBER FLUOROSILICONE CLASS FQ |
| RC0017 | RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR |
| RCA000 | RUBBER NATURAL |
| RCAC00 | RUBBER NEOPRENE |
| RC0001 | RUBBER POLYACRYLATE CLASS ACM |
| RC0002 | RUBBER POLYACRYLATE-ACRYLONITRILE CLASS ANM |
| RCJ000 | RUBBER POLYBUTADIENE |
| RCY000 | RUBBER POLYCHLOROPRENE |
| RC0003 | RUBBER POLYESTER URETHANE CLASS AU |
| RC0011 | RUBBER POLYETHER URETHANE CLASS EU |
| RCL000 | RUBBER POLYETHYLENE |
| RC0020 | RUBBER POLYISOPRENE NATURAL CLASS NR |
| RC0018 | RUBBER POLYISOPRENE SYNTHETIC CLASS IR |
| RC0012 | RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM |
| RC0023 | RUBBER POLYSULFIDE CLASS T |
| RCZ000 | RUBBER POLYURETHANE |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| JWD000 | SAPPHIRE SYNTHETIC |
| SLC000 | SILICON |
| SLK000 | SILICONE |
| FBQ000 | SILK |
| AGA000 | SILVER |
| AGF000 | SILVER ALLOY |
| SLE000 | SOAPSTONE |
| STA000 | STEEL |
| ST1005 | STEEL COMP 1005 |
| ST1006 | STEEL COMP 1006 |
| ST1008 | STEEL COMP 1008 |
| ST1009 | STEEL COMP 1009 |
| ST1010 | STEEL COMP 1010 |
| ST1011 | STEEL COMP 1011 |
| ST1012 | STEEL COMP 1012 |
| ST1013 | STEEL COMP 1013 |
| ST1015 | STEEL COMP 1015 |
| ST1016 | STEEL COMP 1016 |
| ST1017 | STEEL COMP 1017 |
| ST1018 | STEEL COMP 1018 |
| ST1019 | STEEL COMP 1019 |
| ST1020 | STEEL COMP 1020 |
| ST1021 | STEEL COMP 1021 |
| ST1022 | STEEL COMP 1022 |
| ST1023 | STEEL COMP 1023 |
| ST1025 | STEEL COMP 1025 |
| ST1026 | STEEL COMP 1026 |
| ST1029 | STEEL COMP 1029 |
| ST1030 | STEEL COMP 1030 |
| ST1031 | STEEL COMP 1031 |
| ST1033 | STEEL COMP 1033 |
| ST1034 | STEEL COMP 1034 |
| ST1035 | STEEL COMP 1035 |
| ST1037 | STEEL COMP 1037 |
| ST1038 | STEEL COMP 1038 |
| ST1039 | STEEL COMP 1039 |
| ST1040 | STEEL COMP 1040 |
| ST1042 | STEEL COMP 1042 |
| ST1043 | STEEL COMP 1043 |
| ST1044 | STEEL COMP 1044 |
| ST1045 | STEEL COMP 1045 |
| ST1046 | STEEL COMP 1046 |
| ST1049 | STEEL COMP 1049 |
| ST1050 | STEEL COMP 1050 |
| ST1053 | STEEL COMP 1053 |
| ST1054 | STEEL COMP 1054 |
| ST1055 | STEEL COMP 1055 |
| ST1059 | STEEL COMP 1059 |
| ST1060 | STEEL COMP 1060 |
| ST1062 | STEEL COMP 1062 |
| ST1064 | STEEL COMP 1064 |
| ST1065 | STEEL COMP 1065 |
| ST1069 | STEEL COMP 1069 |
| ST1070 | STEEL COMP 1070 |
| ST1074 | STEEL COMP 1074 |
| ST1075 | STEEL COMP 1075 |
| ST1078 | STEEL COMP 1078 |
| ST1080 | STEEL COMP 1080 |
| ST1084 | STEEL COMP 1084 |
| ST1085 | STEEL COMP 1085 |
| ST1086 | STEEL COMP 1086 |
| ST1090 | STEEL COMP 1090 |
| ST1095 | STEEL COMP 1095 |
| ST1108 | STEEL COMP 1108 |
| ST1109 | STEEL COMP 1109 |
| ST1110 | STEEL COMP 1110 |
| ST1115 | STEEL COMP 1115 |
| ST1116 | STEEL COMP 1116 |
| ST1117 | STEEL COMP 1117 |
| ST1118 | STEEL COMP 1118 |
| ST1119 | STEEL COMP 1119 |
| ST1120 | STEEL COMP 1120 |
| ST1125 | STEEL COMP 1125 |
| ST1126 | STEEL COMP 1126 |
| ST1132 | STEEL COMP 1132 |
| ST1137 | STEEL COMP 1137 |
| ST1138 | STEEL COMP 1138 |
| ST1139 | STEEL COMP 1139 |
| ST1140 | STEEL COMP 1140 |
| ST1141 | STEEL COMP 1141 |
| ST1144 | STEEL COMP 1144 |
| ST1145 | STEEL COMP 1145 |
| ST1146 | STEEL COMP 1146 |
| ST1151 | STEEL COMP 1151 |
| ST1211 | STEEL COMP 1211 |
| ST1212 | STEEL COMP 1212 |
| ST1213 | STEEL COMP 1213 |
| ST1215 | STEEL COMP 1215 |
| ST0063 | STEEL COMP 12L14 |
| ST1320 | STEEL COMP 1320 |
| ST0455 | STEEL COMP 1320H |
| ST1330 | STEEL COMP 1330 |
| ST0065 | STEEL COMP 1330H |
| ST1335 | STEEL COMP 1335 |
| ST0066 | STEEL COMP 1335H |
| ST1340 | STEEL COMP 1340 |
| ST1345 | STEEL COMP 1345 |
| ST1524 | STEEL COMP 1524 |
| ST1527 | STEEL COMP 1527 |
| ST1536 | STEEL COMP 1536 |
| ST1541 | STEEL COMP 1541 |
| ST1548 | STEEL COMP 1548 |
| ST1551 | STEEL COMP 1551 |
| ST1552 | STEEL COMP 1552 |
| ST1561 | STEEL COMP 1561 |
| ST1566 | STEEL COMP 1566 |
| ST1572 | STEEL COMP 1572 |
| ST0202 | STEEL COMP 202 |
| ST0159 | STEEL COMP 203EZ |
| ST2317 | STEEL COMP 2317 |
| ST2330 | STEEL COMP 2330 |
| ST0456 | STEEL COMP 2330H |
| ST2340 | STEEL COMP 2340 |
| ST2345 | STEEL COMP 2345 |
| ST0457 | STEEL COMP 2512H |
| ST2515 | STEEL COMP 2515 |
| ST0458 | STEEL COMP 2515H |
| ST0459 | STEEL COMP 2517H |
| ST0301 | STEEL COMP 301 |
| ST0302 | STEEL COMP 302 |
| ST0180 | STEEL COMP 302B |
| ST0303 | STEEL COMP 303 |
| ST0166 | STEEL COMP 303 PLUS X |
| ST0157 | STEEL COMP 303CU |
| ST0165 | STEEL COMP 303MA |
| ST0158 | STEEL COMP 303PB |
| ST0078 | STEEL COMP 303S |
| ST0079 | STEEL COMP 303SE |
| ST0304 | STEEL COMP 304 |
| ST0448 | STEEL COMP 304H |
| ST0080 | STEEL COMP 304L |
| ST0449 | STEEL COMP 304N |
| ST0305 | STEEL COMP 305 |
| ST0152 | STEEL COMP 308 |
| ST0309 | STEEL COMP 309 |
| ST0153 | STEEL COMP 309S |
| ST0492 | STEEL COMP 309S-CB |
| ST0310 | STEEL COMP 310 |
| ST0154 | STEEL COMP 310S |
| ST3115 | STEEL COMP 3115 |
| ST3120 | STEEL COMP 3120 |
| ST0522 | STEEL COMP 3120H |
| ST3130 | STEEL COMP 3130 |
| ST0460 | STEEL COMP 3130H |
| ST3135 | STEEL COMP 3135 |
| ST0461 | STEEL COMP 3135H |
| ST0155 | STEEL COMP 314 |
| ST3140 | STEEL COMP 3140 |
| ST0081 | STEEL COMP 3140H |
| ST3141 | STEEL COMP 3141 |
| ST3145 | STEEL COMP 3145 |
| ST3150 | STEEL COMP 3150 |
| ST0316 | STEEL COMP 316 |
| ST0354 | STEEL COMP 316F |
| ST0450 | STEEL COMP 316H |
| ST0082 | STEEL COMP 316L |
| ST0451 | STEEL COMP 316N |
| ST0317 | STEEL COMP 317 |
| ST0254 | STEEL COMP 317L |
| ST0321 | STEEL COMP 321 |
| ST0452 | STEEL COMP 321H |
| ST0322 | STEEL COMP 322 |
| ST0323 | STEEL COMP 323 |
| ST0324 | STEEL COMP 324 |
| ST0490 | STEEL COMP 329 |
| ST0083 | STEEL COMP 3310H |
| ST0462 | STEEL COMP 3316H |
| ST0347 | STEEL COMP 347 |
| ST0453 | STEEL COMP 347H |
| ST0348 | STEEL COMP 348 |
| ST0384 | STEEL COMP 384 |
| ST0385 | STEEL COMP 385 |
| ST4012 | STEEL COMP 4012 |
| ST4017 | STEEL COMP 4017 |
| ST4023 | STEEL COMP 4023 |
| ST4024 | STEEL COMP 4024 |
| ST4027 | STEEL COMP 4027 |
| ST4028 | STEEL COMP 4028 |
| ST0403 | STEEL COMP 403 |
| ST4032 | STEEL COMP 4032 |
| ST0253 | STEEL COMP 4032H |
| ST4037 | STEEL COMP 4037 |
| ST0085 | STEEL COMP 4037H |
| ST4042 | STEEL COMP 4042 |
| ST0086 | STEEL COMP 4042H |
| ST4047 | STEEL COMP 4047 |
| ST0087 | STEEL COMP 4047H |
| ST0405 | STEEL COMP 405 |
| ST0088 | STEEL COMP 4053H |
| ST4063 | STEEL COMP 4063 |
| ST0089 | STEEL COMP 4063H |
| ST4068 | STEEL COMP 4068 |
| ST0463 | STEEL COMP 4068H |
| ST0410 | STEEL COMP 410 |
| ST4118 | STEEL COMP 4118 |
| ST4130 | STEEL COMP 4130 |
| ST0090 | STEEL COMP 4130H |
| ST0464 | STEEL COMP 4132H |
| ST4135 | STEEL COMP 4135 |
| ST0091 | STEEL COMP 4135H |
| ST4137 | STEEL COMP 4137 |
| ST0092 | STEEL COMP 4137H |
| ST0414 | STEEL COMP 414 |
| ST4140 | STEEL COMP 4140 |
| ST0093 | STEEL COMP 4140H |
| ST4145 | STEEL COMP 4145 |
| ST0095 | STEEL COMP 4145H |
| ST4147 | STEEL COMP 4147 |
| ST0096 | STEEL COMP 4147H |
| ST4150 | STEEL COMP 4150 |
| ST0097 | STEEL COMP 4150H |
| ST0416 | STEEL COMP 416 |
| ST0255 | STEEL COMP 416 PLUS X |
| ST0099 | STEEL COMP 416SE |
| ST0420 | STEEL COMP 420 |
| ST0100 | STEEL COMP 420F |
| ST1047 | STEEL COMP 422 |
| ST0430 | STEEL COMP 430 |
| ST0101 | STEEL COMP 430F |
| ST0172 | STEEL COMP 430FSE |
| ST0431 | STEEL COMP 431 |
| ST0465 | STEEL COMP 4317H |
| ST4320 | STEEL COMP 4320 |
| ST0102 | STEEL COMP 4320H |
| ST4337 | STEEL COMP 4337 |
| ST4340 | STEEL COMP 4340 |
| ST0104 | STEEL COMP 4340H |
| ST0105 | STEEL COMP 440A |
| ST0106 | STEEL COMP 440B |
| ST0107 | STEEL COMP 440C |
| ST0108 | STEEL COMP 440F |
| ST0285 | STEEL COMP 440FSE |
| ST0446 | STEEL COMP 446 |
| ST4608 | STEEL COMP 4608 |
| ST4615 | STEEL COMP 4615 |
| ST4617 | STEEL COMP 4617 |
| ST4620 | STEEL COMP 4620 |
| ST0109 | STEEL COMP 4620H |
| ST4621 | STEEL COMP 4621 |
| ST0110 | STEEL COMP 4621H |
| ST4640 | STEEL COMP 4640 |
| ST0466 | STEEL COMP 4640H |
| ST0481 | STEEL COMP 46B12 |
| ST4812 | STEEL COMP 4812 |
| ST0467 | STEEL COMP 4812H |
| ST4815 | STEEL COMP 4815 |
| ST0111 | STEEL COMP 4815H |
| ST4817 | STEEL COMP 4817 |
| ST0236 | STEEL COMP 4817H |
| ST4820 | STEEL COMP 4820 |
| ST0112 | STEEL COMP 4820H |
| ST5015 | STEEL COMP 5015 |
| ST0502 | STEEL COMP 502 |
| ST5045 | STEEL COMP 5045 |
| ST5046 | STEEL COMP 5046 |
| ST0482 | STEEL COMP 50B30 |
| ST0441 | STEEL COMP 50B40 |
| ST0113 | STEEL COMP 50B44 |
| ST0238 | STEEL COMP 50B46 |
| ST0240 | STEEL COMP 50B50 |
| ST0114 | STEEL COMP 50B60 |
| ST5120 | STEEL COMP 5120 |
| ST0117 | STEEL COMP 5120H |
| ST5130 | STEEL COMP 5130 |
| ST0118 | STEEL COMP 5130H |
| ST5132 | STEEL COMP 5132 |
| ST0119 | STEEL COMP 5132H |
| ST5135 | STEEL COMP 5135 |
| ST0120 | STEEL COMP 5135H |
| ST5140 | STEEL COMP 5140 |
| ST0121 | STEEL COMP 5140H |
| ST5145 | STEEL COMP 5145 |
| ST0122 | STEEL COMP 5145H |
| ST5147 | STEEL COMP 5147 |
| ST0123 | STEEL COMP 5147H |
| ST5150 | STEEL COMP 5150 |
| ST0242 | STEEL COMP 5150H |
| ST5152 | STEEL COMP 5152 |
| ST0468 | STEEL COMP 5152H |
| ST5155 | STEEL COMP 5155 |
| ST5160 | STEEL COMP 5160 |
| ST0124 | STEEL COMP 5160H |
| ST0115 | STEEL COMP 51B60 |
| ST6120 | STEEL COMP 6120 |
| ST6150 | STEEL COMP 6150 |
| ST0129 | STEEL COMP 6150H |
| ST0630 | STEEL COMP 630 |
| ST0631 | STEEL COMP 631 |
| ST0632 | STEEL COMP 632 |
| ST0633 | STEEL COMP 633 |
| ST0634 | STEEL COMP 634 |
| ST0483 | STEEL COMP 80B20 |
| ST0484 | STEEL COMP 80B30 |
| ST0485 | STEEL COMP 80B35 |
| ST0486 | STEEL COMP 80B40 |
| ST8115 | STEEL COMP 8115 |
| ST0523 | STEEL COMP 8115H |
| ST0487 | STEEL COMP 81B35 |
| ST0488 | STEEL COMP 81B40 |
| ST0173 | STEEL COMP 81B45 |
| ST0489 | STEEL COMP 81B50 |
| ST8615 | STEEL COMP 8615 |
| ST0524 | STEEL COMP 8615H |
| ST8617 | STEEL COMP 8617 |
| ST8620 | STEEL COMP 8620 |
| ST0137 | STEEL COMP 8620H |
| ST8622 | STEEL COMP 8622 |
| ST0138 | STEEL COMP 8622H |
| ST8625 | STEEL COMP 8625 |
| ST8627 | STEEL COMP 8627 |
| ST8630 | STEEL COMP 8630 |
| ST0139 | STEEL COMP 8630H |
| ST8635 | STEEL COMP 8635 |
| ST0469 | STEEL COMP 8635H |
| ST8637 | STEEL COMP 8637 |
| ST8640 | STEEL COMP 8640 |
| ST0140 | STEEL COMP 8640H |
| ST8642 | STEEL COMP 8642 |
| ST8645 | STEEL COMP 8645 |
| ST0142 | STEEL COMP 8645H |
| ST8650 | STEEL COMP 8650 |
| ST0143 | STEEL COMP 8650H |
| ST8653 | STEEL COMP 8653 |
| ST8655 | STEEL COMP 8655 |
| ST0175 | STEEL COMP 86B45 |
| ST8720 | STEEL COMP 8720 |
| ST0146 | STEEL COMP 8720H |
| ST8735 | STEEL COMP 8735 |
| ST8740 | STEEL COMP 8740 |
| ST0147 | STEEL COMP 8740H |
| ST8742 | STEEL COMP 8742 |
| ST8745 | STEEL COMP 8745 |
| ST0470 | STEEL COMP 8745H |
| ST8750 | STEEL COMP 8750 |
| ST0471 | STEEL COMP 8750H |
| ST8822 | STEEL COMP 8822 |
| ST0184 | STEEL COMP 90-60 |
| ST9255 | STEEL COMP 9255 |
| ST9260 | STEEL COMP 9260 |
| ST0245 | STEEL COMP 9260H |
| ST9261 | STEEL COMP 9261 |
| ST0472 | STEEL COMP 9261H |
| ST9262 | STEEL COMP 9262 |
| ST0473 | STEEL COMP 9262H |
| ST9440 | STEEL COMP 9440 |
| ST0474 | STEEL COMP 9440H |
| ST9445 | STEEL COMP 9445 |
| ST0475 | STEEL COMP 9445H |
| ST0454 | STEEL COMP 94B15 |
| ST0246 | STEEL COMP 94B17 |
| ST0170 | STEEL COMP 94B30 |
| ST0480 | STEEL COMP 94B40 |
| ST9840 | STEEL COMP 9840 |
| ST9850 | STEEL COMP 9850 |
| ST0476 | STEEL COMP E2517 |
| ST0026 | STEEL COMP E3310 |
| ST0477 | STEEL COMP E4337 |
| ST0028 | STEEL COMP E4340 |
| ST0491 | STEEL COMP E50100 |
| ST0213 | STEEL COMP E51100 |
| ST0030 | STEEL COMP E52100 |
| ST0031 | STEEL COMP E9310 |
| ST0479 | STEEL COMP E9314 |
| ST0163 | STEEL COMP M1020 |
| ST0313 | STEEL COMP M2 |
| ST0046 | STEEL COMP MT1010 |
| ST0047 | STEEL COMP MT1015 |
| ST0048 | STEEL COMP MT1020 |
| ST0049 | STEEL COMP MTX1015 |
| ST0050 | STEEL COMP MTX1020 |
| ST0704 | STEEL COMP XM-12 |
| ST0187 | STEEL COMP XM-13 |
| ST9851 | STEEL COMP XM-34 |
| STB000 | STEEL CORROSION RESISTING |
| ST1097 | STEEL UNS J02502 |
| ST1098 | STEEL UNS J02503 |
| ST1099 | STEEL UNS J03002 |
| ST0594 | STEEL UNS J03008 |
| ST0587 | STEEL UNS J03501 |
| ST1000 | STEEL UNS J12520 |
| ST1762 | STEEL UNS J42015 |
| ST1168 | STEEL UNS J92500 |
| ST1169 | STEEL UNS J92600 |
| ST0623 | STEEL UNS J92650 |
| ST1177 | STEEL UNS J92710 |
| ST0624 | STEEL UNS J92730 |
| ST1178 | STEEL UNS J92800 |
| ST1180 | STEEL UNS J92900 |
| ST0625 | STEEL UNS J92910 |
| ST1181 | STEEL UNS J92971 |
| ST1186 | STEEL UNS J93400 |
| ST1187 | STEEL UNS J93401 |
| ST1188 | STEEL UNS J93402 |
| ST1197 | STEEL UNS J94202 |
| ST1198 | STEEL UNS J94203 |
| ST1746 | STEEL UNS J94204 |
| ST1206 | STEEL UNS J94603 |
| ST1217 | STEEL UNS J95150 |
| ST1778 | STEEL UNS K01602 |
| ST0573 | STEEL UNS K02102 |
| ST1264 | STEEL UNS K02500 |
| ST0608 | STEEL UNS K02504 |
| ST0552 | STEEL UNS K02600 |
| ST1815 | STEEL UNS K02603 |
| ST0574 | STEEL UNS K02708 |
| ST0609 | STEEL UNS K03005 |
| ST0639 | STEEL UNS K03504 |
| ST0612 | STEEL UNS K05501 |
| ST1341 | STEEL UNS K06501 |
| ST0668 | STEEL UNS K08500 |
| ST1007 | STEEL UNS K11572 |
| ST0542 | STEEL UNS K11801 |
| ST1788 | STEEL UNS K11805 |
| ST1393 | STEEL UNS K12211 |
| ST0532 | STEEL UNS K24065 |
| ST1076 | STEEL UNS K41245 |
| ST0628 | STEEL UNS S34720 |
| ST0629 | STEEL UNS S34723 |
| ST1083 | STEEL UNS T12001 |
| SNB000 | TIN |
| SNA000 | TIN ALLOY |
| SN0023 | TIN ALLOY UNS L13601 |
| SN0025 | TIN ALLOY UNS L13631 |
| SN0027 | TIN ALLOY UNS L13701 |
| SN0035 | TIN ALLOY UNS L13940 |
| SN0034 | TIN ALLOY UNS L13961 |
| TTB000 | TITANIUM |
| TTA000 | TITANIUM ALLOY |
| TT0052 | TITANIUM ALLOY UNS R56400 |
| TT0055 | TITANIUM ALLOY UNS R56620 |
| TT0039 | TITANIUM UNS R50250 |
| WXA000 | WAX |
| WXC000 | WAX PARAFFIN |
| WDC000 | WOOD |
| WLA000 | WOOL |
| WL0032 | WOOL COMP 1 |
| WL0058 | WOOL COMP 10A1 |
| WL0057 | WOOL COMP 10A2 |
| WL0056 | WOOL COMP 11A1 |
| WL0055 | WOOL COMP 11A2 |
| WL0014 | WOOL COMP 12R1 |
| WL0015 | WOOL COMP 12R2 |
| WL0016 | WOOL COMP 12R3 |
| WL0017 | WOOL COMP 12R3X |
| WL0037 | WOOL COMP 12S1 |
| WL0038 | WOOL COMP 12S2 |
| WL0039 | WOOL COMP 12S3 |
| WL0040 | WOOL COMP 12S4 |
| WL0018 | WOOL COMP 16R1 |
| WL0019 | WOOL COMP 16R1X |
| WL0020 | WOOL COMP 16R2 |
| WL0021 | WOOL COMP 16R3 |
| WL0022 | WOOL COMP 16R3X |
| WL0041 | WOOL COMP 16S1 |
| WL0042 | WOOL COMP 16S2 |
| WL0043 | WOOL COMP 16S3 |
| WL0044 | WOOL COMP 16S4 |
| WL0023 | WOOL COMP 18R1 |
| WL0034 | WOOL COMP 20S |
| WL0024 | WOOL COMP 20S1 |
| WL0025 | WOOL COMP 20S2 |
| WL0045 | WOOL COMP 20S3 |
| WL0046 | WOOL COMP 20S4 |
| WL0047 | WOOL COMP 26S1 |
| WL0048 | WOOL COMP 26S2 |
| WL0049 | WOOL COMP 26S3 |
| WL0050 | WOOL COMP 26S4 |
| WL0051 | WOOL COMP 32S1 |
| WL0052 | WOOL COMP 32S2 |
| WL0053 | WOOL COMP 32S3 |
| WL0054 | WOOL COMP 32S4 |
| WL0065 | WOOL COMP 3A1 |
| WL0064 | WOOL COMP 4A1 |
| WL0063 | WOOL COMP 5A1 |
| WL0012 | WOOL COMP 6 |
| WL0062 | WOOL COMP 6A1 |
| WL0061 | WOOL COMP 7A1 |
| WL0060 | WOOL COMP 8A1 |
| WL0026 | WOOL COMP 8R5 |
| WL0059 | WOOL COMP 9A2 |
| WL0027 | WOOL COMP 9R1 |
| WL0028 | WOOL COMP 9R2 |
| WL0029 | WOOL COMP 9R3 |
| WL0030 | WOOL COMP 9R4 |
| WL0031 | WOOL COMP 9R5 |
| ZNB000 | ZINC |
| ZN0015 | ZINC ALLOY UNS Z33520 |
| ZN0016 | ZINC ALLOY UNS Z33521 |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABK | TOP |
| 3ACN | CORE |
| 3ADD | INSERT |
| 3ADM | OUTER RING |
| 3ADP | RETAINER |
| 3AEE | OVERALL |
| 3AFG | BOTH SIDES |
| 3AFJ | ONE SIDE |
| 3ALJ | BOTTOM |
| 3AVP | INTERNAL |
| 3AVQ | EXTERNAL |
| 3BCL | BACKING |
| 3CEP | CASE |
| 3CMA | JACKET |
| 3DFV | INNER RING |
| 3DLQ | BOTTOM RING |
| 3DLS | INTERNALLY MOLDED-IN REINFORCEMENT |
| 3DLT | OPPOSITE SIDE |
| 3DLU | PACKING |
| 3DLV | SEALING ELEMENT |
| 3DLY | SPREADER |
| 3DMI | EMI/RFI CONDUCTOR |
| 3DMJ | ENVIRONMENTAL SEAL |
| 3DML | STRENGTHENING FEATURE |
| 3DMM | FIRST INTERMEDIATE RING |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDBL0000*;HUESDTA0000$DWH0012*;HUESDTA0000$$DWH0012*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BR0000 | BROWN |
| CL0001 | COLORLESS |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| VY0000 | IVORY |
| MA0000 | MAROON |
| NA0000 | NATURAL |
| LD0000 | OLIVE DRAB |
| RG0000 | ORANGE |
| PK0000 | PINK |
| RE0000 | RED |
| RU0000 | RUSSET |
| TA0000 | TAN |
| VL0000 | VIOLET |
| WA0000 | WALNUT |
| WH0000 | WHITE |
| WH0012 | WHITE, TRANSLUCENT |
| YE0000 | YELLOW |
CQFM*JHARDNESS RATING
A NUMERIC VALUE THAT REFLECTS THE HARDNESS OF AN ITEM WHEN USED IN CONJUNCTION WITH A HARDNESS RATING SCALE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQFM3DLVJRUB2.0*;CQFM3DLVJRUB2.0$JRUB2.0*;CQFM3DLVJRUB2.0$$JRUB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BCL | BACKING |
| 3CMA | JACKET |
| 3DLS | INTERNALLY MOLDED-IN REINFORCEMENT |
| 3DLV | SEALING ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC26) | Reply |
| BH | BRINELL HULTGREN |
| BS | BRINELL STANDARD |
| BT | BRINELL TUNGSTEN CARBIDE |
| RH | INTERNATIONAL RUBBER HARDNESS DEGREE SCALE |
| PS | PLASTOMETER SCALE |
| RA | ROCKWELL A |
| RB | ROCKWELL B |
| RC | ROCKWELL C |
| RE | ROCKWELL E |
| RF | ROCKWELL F |
| RM | ROCKWELL M |
| RR | ROCKWELL R |
| RS | ROCKWELL SUPERFICIAL 15-N |
| RT | ROCKWELL SUPERFICIAL 15-T |
| RU | ROCKWELL SUPERFICIAL 30-N |
| RW | ROCKWELL SUPERFICIAL 30-T |
| RN | ROCKWELL SUPERFICIAL 45-N |
| SA | SHORE DUROMETER A |
| SM | SHORE DUROMETER A-2 |
| SB | SHORE DUROMETER B |
| SE | SHORE DUROMETER C |
| SD | SHORE DUROMETER D |
| SC | SHORE SCLEROSCOPE |
| AF | VICKERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CQCFDCONSTRUCTION
THE STRUCTURAL CHARACTERISTIC OF THE ITEM.
Enter the applicable reply code from the table below
(CQCFDSP)
| Table 1 |
| Reply Code (AN70) | Reply |
| LM | LAMINATED |
| PE | ONE-PIECE |
| SD | SOLID |
| SP | SPLIT |
| TP | TWO-PIECE |
IF STYLE/REPLY CODE(s) G2, G3, G4, G5, G6, G10, G11, G12, G13, G14, G15, G17, G18, G19, G20, G24, G25, G26, G27, G28, G33, G34, G39, G40 OR G41 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADWH and ADVN)
IF STYLE/REPLY CODE(s) G21 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADWH and ADVN and ADWJ)
IF STYLE/REPLY CODE(s) G23 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADVL and ADVK)
IF STYLE/REPLY CODE(s) G29 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABNH and ADVN and ADWH)
IF STYLE/REPLY CODE(s) G30 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADVL and ADVN)
IF STYLE/REPLY CODE(s) G31 OR G32 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADVK and ADVL and ADVN)
IF STYLE/REPLY CODE(s) G35 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADWH and ADVN and ADVK)
IF STYLE/REPLY CODE(s) G36 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADVN)
IF STYLE/REPLY CODE(s) G38 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADVN and ADWK)
IF STYLE/REPLY CODE(s) G1 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADVL)
AAGR*LCROSS-SECTIONAL SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE CROSS-SECTIONAL SHAPE OF THE ITEM.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(AAGR3AEELG23*;AAGR3AEELG23$LG17*;AAGR3AEELG23$$LG17*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| BN10445 | G1 | CIRCULAR |
| BN10451 | G10 | V |
| BN10452 | G11 | V |
| BN10453 | G12 | SPECIAL |
| BN10454 | G13 | U |
| BN10455 | G14 | U |
| BN10456 | G15 | U |
| BN10457 | G17 | GROOVED |
| BN10458 | G18 | V |
| BN10459 | G19 | V |
| BN10446 | G2 | TRIANGLE |
| BN10460 | G20 | ANGLE |
| BN10461 | G21 | W OR W/O RADIUS DELTA |
| BN10462 | G23 | CIRCULAR WITH CENTER APERTURE |
| BN10463 | G24 | SQUARE WITH OBLONG APERTURE |
| BN10464 | G25 | D |
| BN10465 | G26 | V |
| BN10466 | G27 | U |
| BN10467 | G28 | SPECIAL |
| BN10468 | G29 | ANGLE |
| BN10447 | G3 | RECTANGULAR |
| BN10469 | G30 | D |
| BN10470 | G31 | OPEN EYE |
| BN10471 | G32 | CLOSED EYE |
| BN10472 | G33 | SPECIAL |
| BN10473 | G34 | SPECIAL |
| BN10477 | G35 | SQUARE WITH CENTER APERTURE |
| BN10474 | G36 | SQUARE |
| BN10475 | G38 | ANGLE |
| DQ00124 | G39 | BRISTLES, EDGED |
| BN10448 | G4 | OVAL |
| DQ00125 | G40 | BRISTLES, EDGED |
| DQ00126 | G41 | BRISTLES, EDGED |
| BN10449 | G5 | OBLONG |
| BN10450 | G6 | D |
ABNH*JMINOR WIDTH
THE SMALLEST MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABNHJAB2.0*;ABNHJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADVK*JCROSS SECTION INSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CROSS SECTION,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADVKJAC2.0*;ADVKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADVL*JCROSS SECTION OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CROSS SECTION,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADVLJAB2.0*;ADVLJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADVN*JCROSS-SECTIONAL HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF A CROSS SECTION,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADVNJAC2.0*;ADVNJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADWH*JCROSS-SECTIONAL WIDTH
A MEASUREMENT OF THE CROSS SECTION TAKEN AT RIGHT ANGLES TO THE LENGTH,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADWHJAA2.0*;ADWHJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADWJ*JANGLE HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADWJJAB2.0*;ADWJJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADWK*JMINOR HEIGHT
A MINOR MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN OBJECT,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADWKJAC2.0*;ADWKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AARN*DFABRICATION METHOD
THE PROCESS USED IN MANUFACTURING THE ITEM.
Enter the applicable reply code from the table below
(AARNDAR*;AARNDAQ$DAP*)
| Table 1 |
| Reply Code (AA62) | Reply |
| AP | CELLULAR, EXPLODED |
| AQ | CELLULAR, UNEXPLODED |
| AR | SOLID |
IF STYLE/REPLY CODE(s) A1 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABVL)
IF STYLE/REPLY CODE(s) A2 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADUE and ADUF)
IF STYLE/REPLY CODE(s) A3A OR A4A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADUE and ADUF)
IF STYLE/REPLY CODE(s) A3B OR A4B WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADUE and ADUF and ADPW)
IF STYLE/REPLY CODE(s) A3C OR A4D WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADUE and ADUF and ADPQ)
IF STYLE/REPLY CODE(s) A3D, A4E OR A5C WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADUE and ADUF and ADPQ and ADPW)
IF STYLE/REPLY CODE(s) A4C OR A5B WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADUE and ADUF and ADUG)
IF STYLE/REPLY CODE(s) A4F OR A5D WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADUE and ADUF and ADPQ and ADUG)
IF STYLE/REPLY CODE(s) A4G WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADUE and ADUF and ADUH)
IF STYLE/REPLY CODE(s) A4H OR A5E WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADUE and ADUF and ADPW and ADUH)
IF STYLE/REPLY CODE(s) A4J OR A5F WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADUE and ADUF and ADUG and ADUH)
IF STYLE/REPLY CODE(s) A6, A7 OR A8 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and CTTK)
IF STYLE/REPLY CODE(s) A9 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CTTK and ABHP and ADUK)
IF STYLE/REPLY CODE(s) A10, A11 OR A12 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ADUK and ADUL)
IF STYLE/REPLY CODE(s) A12A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ADUK and ADUL and ADPQ)
IF STYLE/REPLY CODE(s) A13 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ADUL and ADUK and ADPQ)
IF STYLE/REPLY CODE(s) A14 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ADUK and ADUL and ADUN and CTTK)
IF STYLE/REPLY CODE(s) A15 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLA3A)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| BN10125 | A1 | CIRCULAR |
| BN10134 | A10 | STRIP |
| BN10135 | A11 | STRIP |
| DR02012 | A12 | STRIP |
| DR02013 | A12A | STRIP |
| BN10137 | A13 | STRIP |
| BN10138 | A14 | STRIP |
| BN10139 | A15 | STRIP |
| BN10126 | A2 | OVAL |
| DR02014 | A3A | D SHAPE |
| DR02015 | A3B | D SHAPE |
| DR02016 | A3C | D SHAPE |
| BN10127 | A3D | D SHAPE |
| DR02017 | A4A | NON-CIRCULAR |
| DR02018 | A4B | NON-CIRCULAR |
| DR02019 | A4C | NON-CIRCULAR |
| DR02020 | A4D | NON-CIRCULAR |
| DR02021 | A4E | NON-CIRCULAR |
| DR02022 | A4F | NON-CIRCULAR |
| DR02023 | A4G | NON-CIRCULAR |
| DR02024 | A4H | NON-CIRCULAR |
| DR02025 | A4J | NON-CIRCULAR |
| DR02026 | A5A | NON-CIRCULAR |
| DR02027 | A5B | NON-CIRCULAR |
| DR02028 | A5C | NON-CIRCULAR |
| DR02029 | A5D | NON-CIRCULAR |
| DR02030 | A5E | NON-CIRCULAR |
| DR02031 | A5F | NON-CIRCULAR |
| BN10130 | A6 | STRIP |
| BN10131 | A7 | STRIP |
| BN10132 | A8 | STRIP |
| BN10133 | A9 | STRIP |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABVL*JAPERTURE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF AN APERTURE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABVLJAC2.0*;ABVLJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPQ*JINSIDE CORNER RADIUS
A MEASUREMENT OF THE LINE SEGMENT EXTENDING FROM THE CENTER OF A CIRCLE OR SPHERE TO THE CURVE OF AN INSIDE CORNER.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPQJAC2.0*;ADPQJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPW*JOUTSIDE CORNER RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPWJAB2.0*;ADPWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUE*JAPERTURE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN APERTURE,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUEJAB2.0*;ADUEJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUF*JAPERTURE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN APERTURE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUFJAB2.0*;ADUFJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUG*JOUTSIDE CORNER BEVEL LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUGJAB2.0*;ADUGJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUH*JINSIDE CORNER BEVEL LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUHJAB2.0*;ADUHJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUK*JEND CUT LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUKJAC2.0*;ADUKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUL*JEND CUT DEPTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADULJAB2.0*;ADULJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUN*JEND CUT SMALLEST LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUNJAB2.0*;ADUNJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CKSY*JAPERTURE CORNER RADIUS
A MEASUREMENT OF THE DISTANCE FROM THE CENTERLINE TO THE AXIS OF THE APERTURE CORNER.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CKSYJAB2.0*;CKSYJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CWWD*JSIDE CORNER RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWWDJAC2.0*;CWWDJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CWWP*JSIDE RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWWPJAA2.0*;CWWPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CZFW*JCENTER TO CENTER DISTANCE BETWEEN SMALLEST BOLT HOLES
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CZFWJAC2.0*;CZFWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CZFX*JCENTER TO CENTER DISTANCE BETWEEN LARGEST BOLT HOLES
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CZFXJAC2.0*;CZFXJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CZFY*JOUTSIDE EDGE TO SMALLEST BOLT HOLE CENTER DISTANCE ALONG WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CZFYJAA2.0*;CZFYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CZFZ*JOUTSIDE EDGE TO SMALLEST BOLT HOLE CENTER DISTANCE ALONG LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CZFZJAB2.0*;CZFZJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CZGA*JOUTSIDE EDGE TO LARGEST BOLT HOLE CENTER DISTANCE ALONG WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CZGAJAA2.0*;CZGAJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CZGB*JOUTSIDE EDGE TO LARGEST BOLT HOLE CENTER DISTANCE ALONG LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CZGBJAB2.0*;CZGBJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CTTK*JEND CUT ANGLE
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTTKJR2.0*;CTTKJR2.0$$JR2.1*)
| Table 1 |
| Reply Code (AP38) | Reply |
| D | DEGREES |
| R | RADIANS |
CWQP*ASMALLEST BOLT HOLE QUANTITY
NONE.
Enter the numeric reply with a minimum of one digit.
(CWQPA10*)
CWQZ*ALARGEST BOLT HOLE QUANTITY
NONE.
Enter the numeric reply with a minimum of one digit.
(CWQZA10*)
IF STYLE/REPLY CODE(s) TL WERE ENTERED FOR MRC ABSX, YOU MUST ANSWER MRC (ADTL and ADTM)
IF STYLE/REPLY CODE(s) CJ WERE ENTERED FOR MRC ABSX, YOU MUST ANSWER MRC (ADTL and ADTN and ADTP)
IF STYLE/REPLY CODE(s) AT WERE ENTERED FOR MRC ABSX, YOU MUST ANSWER MRC (ADTL)
ABSX*DATTACHMENT METHOD
THE MEANS USED TO ATTACH THE ITEM.
Enter the applicable reply code from the table below
(ABSXDTL*;ABSXDAA$$DAT*)
| Table 1 |
| Reply Code (AB47) | Reply |
| AA | CEMENTED |
| AT | INTEGRAL PRESS FIT BUTTONS |
| TL | ROUND HOLE |
| CJ | SLOT |
ADTL*AATTACHMENT FEATURE QUANTITY
THE NUMBER OF ATTACHMENT FEATURES INCLUDED.
Enter the numeric reply with a minimum of one digit.
(ADTLA10*)
ADTM*JATTACHMENT HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF AN ATTACHMENT HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADTM3DMBJAA2.0*;ADTM3DMBJAA2.0$JAA2.0*;ADTM3DMBJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DMB | SINGLE CIRCLE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADTN*JATTACHMENT FEATURE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ATTACHMENT FEATURE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADTNJAA2.0*;ADTNJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADTP*JATTACHMENT FEATURE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ATTACHMENT FEATURE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADTPJAA2.0*;ADTPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADTQ*JATTACHMENT FEATURE CIRCLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE CIRCLE ON WHICH THE ATTACHMENT FEATURES ARE ALIGNED,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADTQ3AEEJAA2.0*;ADTQ3AEEJAA2.0$JAA2.0*;ADTQ3AEEJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DMB | SINGLE CIRCLE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CTQQ*JATTACHMENT FEATURE CENTER TO CENTER DISTANCE ALONG LENGTH
THE CENTER TO CENTER DISTANCE BETWEEN AN ATTACHMENT FEATURE AND THE ADJACENT ATTACHMENT FEATURE ALONG THE LENGTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTQQJAB2.0*;CTQQJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CTQR*JATTACHMENT FEATURE CENTER TO CENTER DISTANCE ALONG WIDTH
THE CENTER TO CENTER DISTANCE BETWEEN AN ATTACHMENT FEATURE AND THE ADJACENT ATTACHMENT FEATURE ALONG THE WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTQRJAA2.0*;CTQRJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCFG)
| Table 1 |
| Reply Code (AN47) | Reply |
| AEQ | CASEHARDENED |
| DAF | CORD |
| DAG | DIELECTRIC |
| DAH | FABRIC |
| DAJ | FABRIC REINFORCED |
| DAK | FOIL |
| DAL | HEAT RESISTANT |
| DAM | MOLDED |
| BKW | NONMAGNETIC |
| CFF | NONSEPARABLE |
| CFG | SEPARABLE |
| DAN | VULCANIZED |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
IF STYLE/REPLY CODE(s) JG WERE ENTERED FOR MRC ENAC, YOU MUST ANSWER MRC (BDPK)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDJG)
| Table 1 |
| Reply Code (EN02) | Reply |
| JG | ASBESTOS ALTERNATIVE PRODUCTS |
BDPK*JASBESTOS CONTENT PERCENTAGE
THE ASBESTOS CONTENT OF THE ITEM,EXPRESSED IN PERCENT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BDPKJA2.0*;BDPKJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDPDA000*;PRMTDPTA000$DIRA000*;PRMTDPTA000$$DIRA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJPDA000E2.0*;PMWTJPDA000E2.0$$JPDA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJIRA0002.0*;PMLCJIRA0002.0$JIRA0002.0*;PMLCJIRA0002.0$$JIRA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
ABJH*JTEMP RATING
A VALUE WHICH EXPRESSES THE DEGREE OF HEAT OR COLD AS APPLIED TO THE OPERATION,OR LIMITATION OF OPERATION,OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit as in the first and second examples.For negative temperature values, precede the numeric portion of the reply with the letter “M” as in the third and fourth examples.If ISAC coding is authorized for this requirement and one or more of the temperature values in negative, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.Also precede the numeric portion of the reply with the letter “M” as in the fifth and sixth examples.
(ABJHJF68.0*; ABJHJC0.0$$JC35.0*; ABJHJFCM15.0*; ABJHJFM40.0$$JF75.0*; ABJH1BJFM25.0*; ABJH1BJCM35.0$$JCM5.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
CTQT*DOPERATING MEDIUM
THE ENVIRONMENT IN WHICH THE ITEM WILL FUNCTION.
Enter the applicable reply code from the table below
(CTQTDAGA*;CTQTDAFR$DACH*)
| Table 1 |
| Reply Code (AN91) | Reply |
| ACH | ACID, NITRIC |
| AAE | AIR |
| AFM | AQUEOUS, MONOETHANOLAMINE |
| AFN | ASPHALT |
| AFP | BRINE |
| AAN | ETHYLENE GLYCOL |
| AFQ | FLAME |
| AFR | FLUID, HIGH TEMPERATURE |
| AFS | FUEL, ALKYLATE |
| AFT | FUEL, AROMATIC |
| AFW | FUEL, AVIATION |
| AFX | FUEL, HYDROCARBON |
| AFY | FUEL, NONAROMATIC |
| AAQ | GAS |
| ACZ | GASOLINE |
| AFZ | HIGH TEMPERATURE |
| AGA | HIGH TEMPERATURE, EXTREME |
| AAS | HYDRAULIC FLUID |
| AGB | HYDRAULIC FLUID, ARYL PHOSPHATE ESTER |
| ACD | HYDRAULIC FLUID, PETROLEUM BASE |
| AAW | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE |
| AGC | LOW TEMPERATURE, EXTREME |
| AGD | LUBRICANT, PETROLEUM BASE |
| AGE | LUBRICANT, SILICONE |
| ACJ | OIL |
| AGF | OIL, CASTOR |
| AGG | OIL, MINERAL |
| AGH | OIL, PETROLEUM BASE |
| AGJ | OIL, SYNTHETIC |
| AGK | OZONE |
| ABP | STEAM |
| ABR | WATER |
| AGL | WATER, COLD |
| AGM | WATER, HOT |
ADYV*DSMOOTH FINISH SURFACE LOCATION
INDICATES THE LOCATION OF THE SURFACE THAT HAS BEEN MADE FREE OF IRREGULARITIES AND PROJECTIONS.
Enter the applicable reply code from the table below
(ADYVDAPG*;ADYVDAPL$$DAPK*)
| Table 1 |
| Reply Code (AE46) | Reply |
| APL | ALL SURFACES |
| APH | BOTTOM |
| APJ | END |
| APF | EXTERNAL |
| APG | INTERNAL |
| ANC | SIDE |
| APK | TOP |
Reference NotesRefer to Reference Drawings for assitance in answering this MRC.
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAE*;BBRGDAC$$DAM*)
| Table 1 |
| Reply Code (AM81) | Reply |
| AC | CLOSED SHED |
| AD | CONTROLLED HUMIDITY WAREHOUSE |
| AM | DEHUMIDIFIED WAREHOUSE |
| AE | GENERAL PURPOSE WAREHOUSE |
| AN | HEATED WAREHOUSE |
| AH | OPEN SHED |
| AJ | UNHEATED WAREHOUSE |
CTSF*DPROTECTIVE STORAGE FEATURE
INDICATES THE STORAGE FEATURE/S/ REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(CTSFDAC)
| Table 1 |
| Reply Code (AD43) | Reply |
| AC | CORROSION RESISTANT |
| AE | GENERAL PURPOSE |
| AG | HUMIDITY CONTROLLED |
| AH | NONFLAMMABLE |
AFJQ*JSTORAGE TEMP RANGE
THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFJQJCM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAG2)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAP3)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ285*;HZRDDHAZ029$$DHAZ007*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ042 | ASBESTOS |
| HAZ007 | ASPHALT |
| HAZ012 | COPPER |
| HAZ210 | GOLD |
| HAZ211 | GREASE |
| HAZ222 | IRON |
| HAZ029 | LEAD |
| HAZ092 | MAGNESIUM |
| HAZ030 | MAGNESIUM ALLOY |
| HAZ252 | NICKEL |
| HAZ265 | OIL |
| HAZ285 | PLASTIC |
| HAZ303 | SILVER |
| HAZ052 | ZINC |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)