An item designed to occupy the space of an electrical contact without having the electrical characteristics of an electrical contact. Excludes:items designed for insertion into an electrical connector. See also PLUG, END SEAL, ELECTRICAL CONNECTOR and POLARIZING KEY, ELECTRICAL CONNECTOR.
ISAC Reply 3AAR added to MRC MATT.
ISAC Reply 3AAS added to MRC MATT.
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 1F deleted from MRC MATT.
ISAC Reply 1G deleted from MRC MATT.
ISAC Reply 1H deleted from MRC MATT.
ISAC Reply 1J deleted from MRC MATT.
ISAC Reply 3AAR added to MRC MDCL.
ISAC Reply 3AAS added to MRC MDCL.
ISAC Reply 3AAT added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 1A deleted from MRC MDCL.
ISAC Reply 1B deleted from MRC MDCL.
ISAC Reply 1C deleted from MRC MDCL.
ISAC Reply 1D deleted from MRC MDCL.
ISAC Reply 1E deleted from MRC MDCL.
ISAC Reply 1F deleted from MRC MDCL.
ISAC Reply 1G deleted from MRC MDCL.
ISAC Reply 1H deleted from MRC MDCL.
ISAC Reply 1J deleted from MRC MDCL.
ISAC Reply 3AAR added to MRC SFTT.
ISAC Reply 3AAT added to MRC SFTT.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1C deleted from MRC SFTT.
ISAC Reply 1D deleted from MRC SFTT.
ISAC Reply 1E deleted from MRC SFTT.
ISAC Reply 1F deleted from MRC SFTT.
ISAC Reply 1G deleted from MRC SFTT.
ISAC Reply 1H deleted from MRC SFTT.
ISAC Reply 1J deleted from MRC SFTT.
ISAC Reply 3AAR added to MRC STDC.
ISAC Reply 3AAT added to MRC STDC.
ISAC Reply 3AEE added to MRC STDC.
ISAC Reply 3HOU added to MRC STDC.
ISAC Reply 1A deleted from MRC STDC.
ISAC Reply 1B deleted from MRC STDC.
ISAC Reply 1C deleted from MRC STDC.
ISAC Reply 1D deleted from MRC STDC.
ISAC Reply 1E deleted from MRC STDC.
ISAC Reply 1F deleted from MRC STDC.
ISAC Reply 1G deleted from MRC STDC.
ISAC Reply 1H deleted from MRC STDC.
ISAC Reply 1J deleted from MRC STDC.
ISAC Reply 3ABB added to MRC TTQY.
ISAC Reply 3ABC added to MRC TTQY.
ISAC Reply 3ABD added to MRC TTQY.
ISAC Reply 3ABG added to MRC TTQY.
ISAC Reply 3ABH added to MRC TTQY.
ISAC Reply 3AEE added to MRC TTQY.
ISAC Reply 3HOU added to MRC TTQY.
ISAC Reply 1A deleted from MRC TTQY.
ISAC Reply 1B deleted from MRC TTQY.
ISAC Reply 1C deleted from MRC TTQY.
ISAC Reply 1D deleted from MRC TTQY.
ISAC Reply 1E deleted from MRC TTQY.
ISAC Reply 1F deleted from MRC TTQY.
ISAC Reply 1G deleted from MRC TTQY.
ISAC Reply 1H deleted from MRC TTQY.
ISAC Reply 1J deleted from MRC TTQY.
ISAC Reply 1K deleted from MRC TTQY.
ISAC Reply 1L deleted from MRC TTQY.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED35443*)
IF STYLE/REPLY CODE(s) A1, A2, A3, A4, A5, A6, A7, A9, A10, A11, A12, A13, A14, A15, A16, A21, A30, A31, A32, A50, A54, A56, A57, A66, A85, A86, A87, A90, A91 OR A92 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ADAV)
IF STYLE/REPLY CODE(s) A8, A25, A27, A29, A33, A34, A35, A36, A37, A38, A39, A40, A41, A42, A43, A44, A45, A46, A47, A52, A53, A58, A60, A61, A62, A63, A64, A65, A67, A68, A69, A70, A71, A72, A73, A74, A77, A88 OR A89 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ABKW and ABMK)
IF STYLE/REPLY CODE(s) A17, A22 OR A24 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ABKW)
IF STYLE/REPLY CODE(s) A18, A19, A20 OR A23 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ABMK)
IF STYLE/REPLY CODE(s) A49 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABMK)
IF STYLE/REPLY CODE(s) A51 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ABKW and ADAV)
IF STYLE/REPLY CODE(s) A75, A76, A78, A79, A81, A82, A83 OR A84 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ABKW and ABMK and AKRL)
IF STYLE/REPLY CODE(s) A80 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ABKW and AKRL)
IF STYLE/REPLY CODE(s) A93 OR A94 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ADAV)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLA24)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAH1172 | A1 | CENTER CONTACT |
| AAH1181 | A10 | PIN CONTACT |
| AAH1182 | A11 | PIN CONTACT |
| AAH1183 | A12 | PANEL CONTACT |
| AAH1184 | A13 | DIP SOLDER TAIL CONTACT |
| AAH1185 | A14 | TAPER PIN CONTACT |
| AAH1186 | A15 | PIN CRIMP CONTACT |
| AAH1187 | A16 | PIN WIRE-FORM CONTACT |
| AAH1188 | A17 | COAXIAL CONTACT |
| AAH1189 | A18 | FLAT BLADE CONTACT |
| AAH1190 | A19 | TUNING FORK CONTACT |
| AAH1173 | A2 | SOCKET CONTACT |
| AAH1191 | A20 | PRINTED CIRCUIT CONTACT |
| AAH1192 | A21 | PRINTED CIRCUIT CONTACT |
| AAH1193 | A22 | PRINTED CIRCUIT CONTACT |
| AAH1194 | A23 | MODULE BOARD CONTACT |
| AAH1195 | A24 | MODULE BOARD CONTACT |
| AAH1196 | A25 | LEAF TAP CONTACT W/O POINT |
| DR04137 | A26 | LEAF TAP CONTACT W/ HEX HEAD ADJUSTABLE POINT |
| DR04138 | A26A | LEAF TAP CONTACT W/ SLOTTED ADJUSTABLE POINT |
| DR04139 | A26B | LEAF TAP CONTACT W/ ROUND FLATTED FIXED POINT |
| DR04140 | A26C | LEAF TAP CONTACT W/ ROUND FIXED POINT |
| DR04141 | A26D | LEAF TAP CONTACT W/ V-SHAPED FIXED POINT |
| DR04142 | A26E | LEAF TAP CONTACT W/ RECTANGULAR FIXED POINT |
| AAH1197 | A27 | FLAT LEAF CONTACT W/O POINT |
| DR04143 | A28 | FLAT LEAF CONTACT W/ HEX HEAD ADJUSTABLE CONTACT |
| DR04144 | A28A | FLAT LEAF CONTACT W/ SLOTTED ADJUSTABLE POINT |
| DR04145 | A28B | FLAT LEAF CONTACT W/ ROUND FLATTED FIXED POINT |
| DR04146 | A28C | FLAT LEAF CONTACT W/ ROUND FIXED POINT |
| DR04147 | A28D | FLAT LEAF CONTACT W/ V-SHAPED FIXED POINT |
| DR04148 | A28E | FLAT LEAF CONTACT W/ RECTANGULAR FIXED POINT |
| AAH1198 | A29 | POST CONTACT |
| AAH1174 | A3 | PIN CENTER CONTACT |
| AAH1199 | A30 | GRID PLATE CLIP |
| AAH1200 | A31 | GRID PLATE CLIP |
| AAH1201 | A32 | GRID PLATE CLIP |
| AAH1202 | A33 | GRID PLATE CLIP |
| AAH1203 | A34 | GRID PLATE CLIP |
| AAH1204 | A35 | GRID PLATE CLIP |
| AAH1205 | A36 | GRID PLATE CLIP |
| AAH1206 | A37 | GRID PLATE CLIP |
| AAH1207 | A38 | GRID PLATE CLIP |
| AAH1208 | A39 | GRID PLATE CLIP |
| AAH1175 | A4 | SOCKET CONTACT |
| AAH1209 | A40 | GRID PLATE CLIP |
| AAH1210 | A41 | GRID PLATE CLIP |
| AAH1211 | A42 | GRID PLATE CLIP |
| AAH1212 | A43 | GRID PLATE CLIP |
| AAH1213 | A44 | INDUCTOR CLIP |
| AAH1214 | A45 | GRID ANODE CLIP |
| AAH1215 | A46 | GRID ANODE CLIP |
| AAH1216 | A47 | GRID ANODE CLIP |
| AAH1217 | A49 | SNAP CLIP |
| AAH1176 | A5 | SOCKET CRIMP CONTACT |
| AAH1218 | A50 | SNAP CLIP |
| AAH1219 | A51 | SNAP CLIP |
| AAH1220 | A52 | SNAP CLIP |
| AAH1221 | A53 | SNAP CLIP |
| AAH1222 | A54 | SNAP CLIP |
| AAH1223 | A56 | SPARK PLUG CLIP |
| AAH1224 | A57 | SPARK PLUG CLIP |
| AAH1225 | A58 | SPARK PLUG CLIP |
| AAH1177 | A6 | CRIMP TYPE CONTACT |
| AAH1226 | A60 | SPARK PLUG CLIP |
| AAH1227 | A61 | FAHNESTOCK CLIP |
| AAH1228 | A62 | FAHNESTOCK CLIP |
| AAH1229 | A63 | FAHNESTOCK CLIP |
| AAH1230 | A64 | FAHNESTOCK CLIP |
| AAH1231 | A65 | FAHNESTOCK CLIP |
| AAH1232 | A66 | SOLDERLESS CLIP |
| AAH1233 | A67 | KNIFE BLADE CLIP |
| AAH1234 | A68 | KNIFE BLADE CLIP |
| AAH1235 | A69 | FERRULE CLIP W/STOP |
| AAH1178 | A7 | SOCKET INSERT CONTACT |
| AAH1236 | A70 | FERRULE CLIP W/STOP |
| AAH1237 | A71 | FERRULE CLIP |
| AAH1238 | A72 | FERRULE CLIP |
| AAH1239 | A73 | FERRULE CLIP |
| AAH1240 | A74 | FERRULE CLIP |
| AAH1241 | A75 | ALLIGATOR CLIP |
| AAH1242 | A76 | CROCODILE CLIP |
| AAH1243 | A77 | COIL TEST CLIP |
| AAH1244 | A78 | NEEDLE CLIP |
| AAH1245 | A79 | BATTERY CLIP |
| AAH1179 | A8 | SOCKET CONTACT |
| AAH1246 | A80 | BATTERY CLIP |
| AAH1247 | A81 | BATTERY CLIP |
| AAH1248 | A82 | FINE WIRE CLIP |
| AAH1249 | A83 | TAG AND PIN CLIP |
| AAH1250 | A84 | BULLDOG CLIP |
| AAH1251 | A85 | GRID ANODE CLIP |
| AAH1252 | A86 | GRID ANODE CLIP |
| AAH1253 | A87 | CYLINDRICAL SHAPE |
| AAH1254 | A88 | RECTANGULAR SHAPE |
| AAH1255 | A89 | IRREGULAR SHAPE |
| AAH1180 | A9 | PIN CONTACT |
| AAH1256 | A90 | HEX HEAD ADJUSTABLE POINT CONTACT |
| AAH1257 | A91 | SLOTTED ADJUSTABLE POINT CONTACT |
| AAH1258 | A92 | ROUND FLATTED FIXED POINT CONTACT |
| AAH1259 | A93 | ROUND FIXED POINT CONTACT |
| AAH1260 | A94 | V-SHAPED FIXED POINT CONTACT |
AKXP*DLEAF TAP CONTACT POINT TYPE
INDICATES THE TYPE OF LEAF TAP CONTACT POINT(S) PROVIDED.
Enter the applicable reply code from the table below
(AKXPDAUX)
| Table 1 |
| Reply Code (AK54) | Reply |
| AUT | HEX HEAD ADJUSTABLE POINT |
| AUY | RECTANGULAR FIXED POINT |
| AUW | ROUND FIXED POINT |
| AUV | ROUND FLATTED FIXED POINT |
| AUU | SLOTTED ADJUSTABLE POINT |
| AUX | V-SHAPED FIXED POINT |
AKXU*DFLAT LEAF CONTACT POINT TYPE
INDICATES THE TYPE OF FLAT LEAF CONTACT POINT(S) PROVIDED.
Enter the applicable reply code from the table below
(AKXUDAUT)
| Table 1 |
| Reply Code (AK54) | Reply |
| AUT | HEX HEAD ADJUSTABLE POINT |
| AUY | RECTANGULAR FIXED POINT |
| AUW | ROUND FIXED POINT |
| AUV | ROUND FLATTED FIXED POINT |
| AUU | SLOTTED ADJUSTABLE POINT |
| AUX | V-SHAPED FIXED POINT |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAC2.0*;ABMKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAA2.0*;ADAVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKRL*JJAW OPENING
A MEASUREMENT OF THE JAW OPENING WITH THE JAWS FULLY OPENED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKRLJAB2.0*;AKRLJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AATDST0157*;MATT3AATDST0157$DSLF000*;MATT3AATDST0157$$DSLF000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAR | BODY AND CONTACT |
| 3AAS | CONTACT |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALD000 | ALUMINA |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL1100 | ALUMINUM ALLOY 1100 |
| AL2011 | ALUMINUM ALLOY 2011 |
| AL2014 | ALUMINUM ALLOY 2014 |
| AL2017 | ALUMINUM ALLOY 2017 |
| AL2018 | ALUMINUM ALLOY 2018 |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL2025 | ALUMINUM ALLOY 2025 |
| AL2218 | ALUMINUM ALLOY 2218 |
| AL2219 | ALUMINUM ALLOY 2219 |
| AL2618 | ALUMINUM ALLOY 2618 |
| AL3003 | ALUMINUM ALLOY 3003 |
| AL0046 | ALUMINUM ALLOY 356.0 |
| AL0051 | ALUMINUM ALLOY 357.0 |
| AL0029 | ALUMINUM ALLOY 360.0 |
| AL0031 | ALUMINUM ALLOY 380.0 |
| AL0054 | ALUMINUM ALLOY 383.0 |
| AL0032 | ALUMINUM ALLOY 384.0 |
| AL4032 | ALUMINUM ALLOY 4032 |
| AL0027 | ALUMINUM ALLOY 413.0 |
| AL0044 | ALUMINUM ALLOY 443.0 |
| AL5052 | ALUMINUM ALLOY 5052 |
| AL5083 | ALUMINUM ALLOY 5083 |
| AL5086 | ALUMINUM ALLOY 5086 |
| AL0050 | ALUMINUM ALLOY 518.0 |
| AL5454 | ALUMINUM ALLOY 5454 |
| AL5456 | ALUMINUM ALLOY 5456 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL6062 | ALUMINUM ALLOY 6062 |
| AL6063 | ALUMINUM ALLOY 6063 |
| AL6066 | ALUMINUM ALLOY 6066 |
| AL6151 | ALUMINUM ALLOY 6151 |
| AL7049 | ALUMINUM ALLOY 7049 |
| AL7075 | ALUMINUM ALLOY 7075 |
| AL7076 | ALUMINUM ALLOY 7076 |
| AL7079 | ALUMINUM ALLOY 7079 |
| AL7178 | ALUMINUM ALLOY 7178 |
| AL0052 | ALUMINUM ALLOY A360.0 |
| AL0028 | ALUMINUM ALLOY A380.0 |
| AL0030 | ALUMINUM ALLOY A413.0 |
| A | ANY ACCEPTABLE |
| ASA000 | ASBESTOS |
| MSD000 | ASPHALT |
| GFB000 | BAKELITE-GRAPHITE |
| BEA000 | BERYLLIUM |
| BEC000 | BERYLLIUM OXIDE |
| CDA000 | CADMIUM |
| CAA000 | CALCIUM SILICATE |
| CNA000 | CARBON |
| CNB000 | CARBON GRAPHITE |
| PPC000 | CARDBOARD |
| CSB000 | CELLULOSE ACETATE |
| CLD000 | CERAMIC |
| CRA000 | CHROMIUM |
| CLE000 | CLAY ALUMINA |
| CTA000 | COBALT |
| MTD000 | CONSTANTAN |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0059 | COPPER ALLOY 101 |
| CU0249 | COPPER ALLOY 102 |
| CU0282 | COPPER ALLOY 103 |
| CU0286 | COPPER ALLOY 104 |
| CU0287 | COPPER ALLOY 105 |
| CU0288 | COPPER ALLOY 107 |
| CU0283 | COPPER ALLOY 108 |
| CU0063 | COPPER ALLOY 110 |
| CU0289 | COPPER ALLOY 113 |
| CU0290 | COPPER ALLOY 114 |
| CU0291 | COPPER ALLOY 116 |
| CU0247 | COPPER ALLOY 120 |
| CU0248 | COPPER ALLOY 122 |
| CU0292 | COPPER ALLOY 123 |
| CU0278 | COPPER ALLOY 125 |
| CU0324 | COPPER ALLOY 127 |
| CU0326 | COPPER ALLOY 128 |
| CU0315 | COPPER ALLOY 130 |
| CU0293 | COPPER ALLOY 141-CANCELED |
| CU0279 | COPPER ALLOY 142 |
| CU0281 | COPPER ALLOY 145 |
| CU0284 | COPPER ALLOY 147 |
| CU0285 | COPPER ALLOY 162 |
| CU0297 | COPPER ALLOY 165 |
| CU0068 | COPPER ALLOY 170 |
| CU0069 | COPPER ALLOY 172 |
| CU0233 | COPPER ALLOY 173 |
| CU0265 | COPPER ALLOY 175 |
| CU0338 | COPPER ALLOY 182 |
| CU0317 | COPPER ALLOY 184 |
| CU0318 | COPPER ALLOY 185 |
| CU0280 | COPPER ALLOY 187 |
| CU0263 | COPPER ALLOY 210 |
| CU0264 | COPPER ALLOY 220 |
| CU0074 | COPPER ALLOY 230 |
| CU0076 | COPPER ALLOY 240 |
| CU0079 | COPPER ALLOY 260 |
| CU0304 | COPPER ALLOY 262 |
| CU0080 | COPPER ALLOY 268 |
| CU0081 | COPPER ALLOY 270 |
| CU0272 | COPPER ALLOY 272 |
| CU0274 | COPPER ALLOY 274 |
| CU0302 | COPPER ALLOY 280 |
| CU0314 | COPPER ALLOY 314 |
| CU0316 | COPPER ALLOY 316 |
| CU0320 | COPPER ALLOY 320 |
| CU0330 | COPPER ALLOY 330 |
| CU0305 | COPPER ALLOY 331 |
| CU0332 | COPPER ALLOY 332 |
| CU0335 | COPPER ALLOY 335 |
| CU0340 | COPPER ALLOY 340 |
| CU0088 | COPPER ALLOY 342 |
| CU0306 | COPPER ALLOY 344 |
| CU0307 | COPPER ALLOY 345 |
| CU0308 | COPPER ALLOY 347 |
| CU0309 | COPPER ALLOY 348 |
| CU0310 | COPPER ALLOY 350 |
| CU0089 | COPPER ALLOY 353 |
| CU0090 | COPPER ALLOY 356 |
| CU0091 | COPPER ALLOY 360 |
| CU0370 | COPPER ALLOY 370 |
| CU0092 | COPPER ALLOY 377 |
| CU0098 | COPPER ALLOY 462 |
| CU0099 | COPPER ALLOY 464 |
| CU0465 | COPPER ALLOY 465 |
| CU0466 | COPPER ALLOY 466 |
| CU0467 | COPPER ALLOY 467 |
| CU0100 | COPPER ALLOY 482 |
| CU0101 | COPPER ALLOY 485 |
| CU0298 | COPPER ALLOY 502 |
| CU0299 | COPPER ALLOY 507 |
| CU0300 | COPPER ALLOY 508 |
| CU0103 | COPPER ALLOY 510 |
| CU0104 | COPPER ALLOY 511 |
| CU0105 | COPPER ALLOY 521 |
| CU0106 | COPPER ALLOY 524 |
| CU0107 | COPPER ALLOY 532-CANCELED |
| CU0108 | COPPER ALLOY 534 |
| CU0109 | COPPER ALLOY 544 |
| CU0111 | COPPER ALLOY 606 |
| CU0301 | COPPER ALLOY 607 |
| CU0115 | COPPER ALLOY 614 |
| CU0122 | COPPER ALLOY 630 |
| CU0303 | COPPER ALLOY 638 |
| CU0127 | COPPER ALLOY 642 |
| CU0129 | COPPER ALLOY 651 |
| CU0131 | COPPER ALLOY 655 |
| CU0706 | COPPER ALLOY 706 |
| CU0294 | COPPER ALLOY 710 |
| CU0715 | COPPER ALLOY 715 |
| CU0295 | COPPER ALLOY 732 |
| CU0146 | COPPER ALLOY 735 |
| CU0296 | COPPER ALLOY 740 |
| CU0148 | COPPER ALLOY 745 |
| CU0150 | COPPER ALLOY 752 |
| CU0757 | COPPER ALLOY 757 |
| CU0151 | COPPER ALLOY 762 |
| CU0152 | COPPER ALLOY 764 |
| CU0153 | COPPER ALLOY 766 |
| CU0157 | COPPER ALLOY 770 |
| CU0162 | COPPER ALLOY 794 |
| CU0172 | COPPER ALLOY 836 |
| CU0173 | COPPER ALLOY 838 |
| CU0174 | COPPER ALLOY 842 |
| CU0175 | COPPER ALLOY 844 |
| CU0178 | COPPER ALLOY 854 |
| CU0183 | COPPER ALLOY 863 |
| CU0185 | COPPER ALLOY 865 |
| CU0195 | COPPER ALLOY 903 |
| CU0196 | COPPER ALLOY 905 |
| CU0198 | COPPER ALLOY 910 |
| CU0202 | COPPER ALLOY 922 |
| CU0203 | COPPER ALLOY 923 |
| CU0206 | COPPER ALLOY 932 |
| CU0207 | COPPER ALLOY 934 |
| CU0208 | COPPER ALLOY 935 |
| CU0210 | COPPER ALLOY 938 |
| CU0212 | COPPER ALLOY 940 |
| CU0214 | COPPER ALLOY 943 |
| CUD000 | COPPER GRAPHITE |
| CPB000 | ELASTOMER FLUOROCARBON |
| CPE000 | ELASTOMER POLYCHLOROPRENE |
| GFC000 | ELECTROGRAPHITIC |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| GSJ000 | GLASS OPTICAL |
| GSK000 | GLASS SILICA |
| AUA000 | GOLD |
| AUB000 | GOLD ALLOY |
| GFA000 | GRAPHITE |
| IRA000 | IRIDIUM |
| FEA000 | IRON |
| FEF000 | IRON ALLOY |
| FE0001 | IRON ALLOY 52 |
| PBA000 | LEAD |
| MGB000 | MAGNESIUM ALLOY |
| MG0012 | MAGNESIUM ALLOY AZ91A |
| MTC000 | METAL |
| MTG000 | METAL FERROUS |
| MTJ000 | METAL NONFERROUS/D |
| AYA000 | MICA |
| AYB000 | MICA GLASS BONDED |
| MBA000 | MOLYBDENUM |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| NL0018 | NICKEL ALLOY K-500 |
| NL0017 | NICKEL ALLOY R-405 |
| NLC000 | NICKEL SILVER |
| FBB000 | NYLON |
| PDA000 | PALLADIUM |
| PPA000 | PAPER |
| PCA000 | PLASTIC |
| PCB000 | PLASTIC ACETAL |
| PCC000 | PLASTIC ACRYLATE |
| PCD000 | PLASTIC ACRYLIC |
| PCAX00 | PLASTIC ACRYLONITRILE |
| PCBL00 | PLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) |
| PCE000 | PLASTIC ALKYD |
| PCF000 | PLASTIC ALLYL |
| PCAAM0 | PLASTIC AMINO |
| PCAN00 | PLASTIC CELLULOSE ACETATE |
| PCBN00 | PLASTIC CELLULOSE ACETATE BUTYRATE |
| PCBJ00 | PLASTIC CELLULOSE NITRATE |
| PCAAN0 | PLASTIC CELLULOSE PROPIONATE |
| PCAAZ0 | PLASTIC CHLORINATED POLYESTER |
| PCAAQ0 | PLASTIC CHLOROTRIFLUOROETHYLENE |
| PCBP00 | PLASTIC DIALLYL ISOPHTHALATE |
| PCG000 | PLASTIC DIALLYL PHTHALATE |
| PCAAK0 | PLASTIC DIALLYL PHTHALATE MINERAL FILLED |
| PCH000 | PLASTIC EPOXY |
| PCBY00 | PLASTIC ETHYL CELLULOSE |
| PCBR00 | PLASTIC FLUORINATED ETHYLENE PROPYLENE |
| PCAAD0 | PLASTIC FLUOROCARBON |
| PCAAE0 | PLASTIC FLUOROSILICONE |
| PCAAR0 | PLASTIC FURANE |
| PCAAS0 | PLASTIC ISOCYANATE |
| PCJ000 | PLASTIC MELAMINE |
| PCAAJ0 | PLASTIC MELAMINE MINERAL FILLED |
| PCBB00 | PLASTIC METHACRYLATE |
| PCAAG0 | PLASTIC MINERAL FILLED |
| PCM000 | PLASTIC PHENOL-FORMALDEHYDE |
| PCN000 | PLASTIC PHENOLIC |
| PCAAH0 | PLASTIC PHENOLIC MINERAL FILLED |
| PCBK00 | PLASTIC PHENOXY |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCR000 | PLASTIC POLYCARBONATE |
| PCS000 | PLASTIC POLYCHLOROFLUOROETHYLENE |
| PCT000 | PLASTIC POLYCHLOROTRIFLUOROETHYLENE |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| PCAAY0 | PLASTIC POLYHYDROXY |
| PCBE00 | PLASTIC POLYPHENYLENE |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAD00 | PLASTIC POLYSTYRENE |
| PCAE00 | PLASTIC POLYSULFONE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAG00 | PLASTIC POLYTRIFLUOROCHLOROETHYLENE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCBM00 | PLASTIC POLYVINYL ACETATE |
| PCAAT0 | PLASTIC POLYVINYL ALCOHOL |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCBT00 | PLASTIC POLYVINYL FLUORIDE |
| PCBG00 | PLASTIC POLYVINYLIDENE CHLORIDE |
| PCAY00 | PLASTIC PYROXYLIN |
| PCAK00 | PLASTIC SILICONE |
| PCAAL0 | PLASTIC SILICONE MINERAL FILLED |
| PCBC00 | PLASTIC STYRENE |
| PCAAW0 | PLASTIC STYRENE ACRYLONITRILE |
| PCAW00 | PLASTIC TETRAFLUOROETHYLENE |
| PCAL00 | PLASTIC UREA |
| PCAAX0 | PLASTIC UREA-FORMALDEHYDE |
| PCAAA0 | PLASTIC VINYL ACETATE |
| PTA000 | PLATINUM |
| PTB000 | PLATINUM ALLOY |
| CLB000 | PORCELAIN |
| RSB000 | RESIN SILICONE |
| RSA000 | RESIN SYNTHETIC |
| RHA000 | RHODIUM |
| RCE000 | RUBBER |
| RCF000 | RUBBER BUNA N |
| RCG000 | RUBBER BUNA S |
| RCD000 | RUBBER CHLOROPRENE |
| RCS000 | RUBBER FLUOROSILICONE |
| RCA000 | RUBBER NATURAL |
| RCJ000 | RUBBER POLYBUTADIENE |
| RCP000 | RUBBER POLYISOBUTYLENE |
| RCC000 | RUBBER SILICONE |
| RCB000 | RUBBER SYNTHETIC |
| RTA000 | RUTHENIUM |
| SLC000 | SILICON |
| SLB000 | SILICON CARBIDE |
| AGA000 | SILVER |
| AGF000 | SILVER ALLOY |
| AGD000 | SILVER COIN |
| AGB000 | SILVER FINE |
| AGC000 | SILVER GRAPHITE |
| AGE000 | SILVER STERLING |
| SLF000 | STEATITE |
| STA000 | STEEL |
| ST1008 | STEEL COMP 1008 |
| ST1009 | STEEL COMP 1009 |
| ST1010 | STEEL COMP 1010 |
| ST1011 | STEEL COMP 1011 |
| ST1012 | STEEL COMP 1012 |
| ST1015 | STEEL COMP 1015 |
| ST1016 | STEEL COMP 1016 |
| ST1017 | STEEL COMP 1017 |
| ST1018 | STEEL COMP 1018 |
| ST1019 | STEEL COMP 1019 |
| ST1020 | STEEL COMP 1020 |
| ST1021 | STEEL COMP 1021 |
| ST1022 | STEEL COMP 1022 |
| ST1023 | STEEL COMP 1023 |
| ST1024 | STEEL COMP 1024 |
| ST1025 | STEEL COMP 1025 |
| ST1026 | STEEL COMP 1026 |
| ST1027 | STEEL COMP 1027 |
| ST1029 | STEEL COMP 1029 |
| ST1030 | STEEL COMP 1030 |
| ST1031 | STEEL COMP 1031 |
| ST1033 | STEEL COMP 1033 |
| ST1035 | STEEL COMP 1035 |
| ST1036 | STEEL COMP 1036 |
| ST1037 | STEEL COMP 1037 |
| ST1038 | STEEL COMP 1038 |
| ST1039 | STEEL COMP 1039 |
| ST1040 | STEEL COMP 1040 |
| ST1041 | STEEL COMP 1041 |
| ST1042 | STEEL COMP 1042 |
| ST1043 | STEEL COMP 1043 |
| ST1045 | STEEL COMP 1045 |
| ST1046 | STEEL COMP 1046 |
| ST1049 | STEEL COMP 1049 |
| ST1050 | STEEL COMP 1050 |
| ST1051 | STEEL COMP 1051 |
| ST1052 | STEEL COMP 1052 |
| ST1053 | STEEL COMP 1053 |
| ST1055 | STEEL COMP 1055 |
| ST1059 | STEEL COMP 1059 |
| ST1060 | STEEL COMP 1060 |
| ST1061 | STEEL COMP 1061 |
| ST1064 | STEEL COMP 1064 |
| ST1065 | STEEL COMP 1065 |
| ST1069 | STEEL COMP 1069 |
| ST1070 | STEEL COMP 1070 |
| ST1072 | STEEL COMP 1072 |
| ST1074 | STEEL COMP 1074 |
| ST1075 | STEEL COMP 1075 |
| ST1078 | STEEL COMP 1078 |
| ST1080 | STEEL COMP 1080 |
| ST1084 | STEEL COMP 1084 |
| ST1085 | STEEL COMP 1085 |
| ST1086 | STEEL COMP 1086 |
| ST1090 | STEEL COMP 1090 |
| ST1095 | STEEL COMP 1095 |
| ST1108 | STEEL COMP 1108 |
| ST1109 | STEEL COMP 1109 |
| ST1110 | STEEL COMP 1110 |
| ST1112 | STEEL COMP 1112 |
| ST1113 | STEEL COMP 1113 |
| ST1115 | STEEL COMP 1115 |
| ST1116 | STEEL COMP 1116 |
| ST1117 | STEEL COMP 1117 |
| ST1118 | STEEL COMP 1118 |
| ST1119 | STEEL COMP 1119 |
| ST1120 | STEEL COMP 1120 |
| ST1126 | STEEL COMP 1126 |
| ST1132 | STEEL COMP 1132 |
| ST1137 | STEEL COMP 1137 |
| ST1138 | STEEL COMP 1138 |
| ST1139 | STEEL COMP 1139 |
| ST1140 | STEEL COMP 1140 |
| ST1141 | STEEL COMP 1141 |
| ST1144 | STEEL COMP 1144 |
| ST1145 | STEEL COMP 1145 |
| ST1146 | STEEL COMP 1146 |
| ST1151 | STEEL COMP 1151 |
| ST1211 | STEEL COMP 1211 |
| ST1212 | STEEL COMP 1212 |
| ST1213 | STEEL COMP 1213 |
| ST1215 | STEEL COMP 1215 |
| ST0063 | STEEL COMP 12L14 |
| ST1330 | STEEL COMP 1330 |
| ST1345 | STEEL COMP 1345 |
| ST0201 | STEEL COMP 201 |
| ST0202 | STEEL COMP 202 |
| ST0159 | STEEL COMP 203EZ |
| ST0301 | STEEL COMP 301 |
| ST0302 | STEEL COMP 302 |
| ST0180 | STEEL COMP 302B |
| ST0303 | STEEL COMP 303 |
| ST0251 | STEEL COMP 303 PLUS CB |
| ST0166 | STEEL COMP 303 PLUS X |
| ST0157 | STEEL COMP 303CU |
| ST0077 | STEEL COMP 303F |
| ST0250 | STEEL COMP 303F PLUS CB |
| ST0165 | STEEL COMP 303MA |
| ST0158 | STEEL COMP 303PB |
| ST0078 | STEEL COMP 303S |
| ST0079 | STEEL COMP 303SE |
| ST0304 | STEEL COMP 304 |
| ST0080 | STEEL COMP 304L |
| ST0305 | STEEL COMP 305 |
| ST0152 | STEEL COMP 308 |
| ST0309 | STEEL COMP 309 |
| ST0153 | STEEL COMP 309S |
| ST0310 | STEEL COMP 310 |
| ST0154 | STEEL COMP 310S |
| ST0155 | STEEL COMP 314 |
| ST0316 | STEEL COMP 316 |
| ST0354 | STEEL COMP 316F |
| ST0082 | STEEL COMP 316L |
| ST0317 | STEEL COMP 317 |
| ST0254 | STEEL COMP 317L |
| ST0321 | STEEL COMP 321 |
| ST0322 | STEEL COMP 322 |
| ST0323 | STEEL COMP 323 |
| ST0324 | STEEL COMP 324 |
| ST0347 | STEEL COMP 347 |
| ST0348 | STEEL COMP 348 |
| ST0384 | STEEL COMP 384 |
| ST0385 | STEEL COMP 385 |
| ST0403 | STEEL COMP 403 |
| ST0405 | STEEL COMP 405 |
| ST0410 | STEEL COMP 410 |
| ST4130 | STEEL COMP 4130 |
| ST0414 | STEEL COMP 414 |
| ST4140 | STEEL COMP 4140 |
| ST0416 | STEEL COMP 416 |
| ST0255 | STEEL COMP 416 PLUS X |
| ST0099 | STEEL COMP 416SE |
| ST0420 | STEEL COMP 420 |
| ST0100 | STEEL COMP 420F |
| ST0284 | STEEL COMP 420FSE |
| ST0430 | STEEL COMP 430 |
| ST0101 | STEEL COMP 430F |
| ST0172 | STEEL COMP 430FSE |
| ST0431 | STEEL COMP 431 |
| ST4340 | STEEL COMP 4340 |
| ST0105 | STEEL COMP 440A |
| ST0106 | STEEL COMP 440B |
| ST0107 | STEEL COMP 440C |
| ST0108 | STEEL COMP 440F |
| ST0285 | STEEL COMP 440FSE |
| ST0446 | STEEL COMP 446 |
| ST4620 | STEEL COMP 4620 |
| ST6150 | STEEL COMP 6150 |
| ST0129 | STEEL COMP 6150H |
| ST0630 | STEEL COMP 630 |
| ST8620 | STEEL COMP 8620 |
| ST0014 | STEEL COMP B1111 |
| ST0015 | STEEL COMP B1112 |
| ST0016 | STEEL COMP B1113 |
| ST0298 | STEEL COMP W110 |
| STB000 | STEEL CORROSION RESISTING |
| MTF000 | TANTALUM |
| TLA000 | TELLURIUM |
| SNB000 | TIN |
| SNA000 | TIN ALLOY |
| TNA000 | TUNGSTEN |
| TNC000 | TUNGSTEN ALLOY |
| TNB000 | TUNGSTEN CARBIDE |
| WXA000 | WAX |
| WXC000 | WAX PARAFFIN |
| WDC000 | WOOD |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAR | BODY AND CONTACT |
| 3AAS | CONTACT |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AARDLQA000*;SFTT3AARDLQA000$DPCK000*;SFTT3AARDLQA000$$DPCK000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAR | BODY AND CONTACT |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| MSB000 | ADHESIVE |
| ALB000 | ALUMINUM |
| ALA000 | ALUMINUM ALLOY |
| AL6061 | ALUMINUM ALLOY 6061 |
| ANA000 | ANODIZE |
| A | ANY ACCEPTABLE |
| CDA000 | CADMIUM |
| CNA000 | CARBON |
| CLB000 | CERAMIC |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| DCA000 | DICHROMATE |
| DCB000 | DICHROMATE POTASSIUM |
| DCD000 | DICHROMATE SODIUM |
| DCC000 | DICHROMATE ZINC |
| ENA000 | ENAMEL |
| END000 | ENAMEL BAKED |
| CLD000 | ENAMEL PORCELAIN |
| AUA000 | GOLD |
| GFA000 | GRAPHITE |
| IRA000 | IRIDIUM |
| LQA000 | LACQUER |
| LQB000 | LACQUER ALUMINUM CELLULOSE |
| PBA000 | LEAD |
| NLA000 | NICKEL |
| NLC000 | NICKEL ALLOY |
| NLB000 | NICKEL SILVER |
| XXB000 | OXIDE |
| XXF000 | OXIDE ALUMINUM |
| XXA000 | OXIDE FILM |
| PNA000 | PAINT |
| PNC000 | PAINT ALUMINUM |
| PND000 | PAINT EPOXY |
| PDA000 | PALLADIUM |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PCA000 | PLASTIC |
| PCK000 | PLASTIC ACRYLIC |
| PCN000 | PLASTIC DIALLYL PHTHALATE |
| PCL000 | PLASTIC MELAMINE |
| PCM000 | PLASTIC PHENOLIC |
| PCJ000 | PLASTIC POLYSTYRENE |
| PCP000 | PLASTIC POLYSULFONE |
| PCH000 | PLASTIC VINYL |
| PTA000 | PLATINUM |
| PTB000 | PLATINUM ALLOY |
| CLC000 | PORCELAIN |
| PRA000 | PRIMER |
| RHA000 | RHODIUM |
| RCA000 | RUBBER |
| AGA000 | SILVER |
| AGB000 | SILVER ALLOY |
| SRA000 | SOLDER |
| SNA000 | TIN |
| TNA000 | TUNGSTEN |
| TNB000 | TUNGSTEN ALLOY |
| VAA000 | VARNISH |
| WXB000 | WAX PARAFFIN |
| ZNA000 | ZINC |
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAR | BODY AND CONTACT |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
AAPC*DIDENTIFICATION CODE COLOR
THE APPLICATION OF COLOR OR A SERIES OF COLORS FOR THE EXPRESSED PURPOSE OF IDENTIFYING THE SPECIFIC FUNCTIONAL DESIGN AND/OR THE SYSTEM APPLICATION OF AN ITEM.
Enter the applicable reply code from the table below
(AAPCDGY0000*;AAPCDCL0000$DPU0000*;AAPCDCL0000$$DPU0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BR0000 | BROWN |
| CL0000 | CLEAR |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| NA0000 | NATURAL |
| RG0000 | ORANGE |
| PU0000 | PURPLE |
| RE0000 | RED |
| VL0000 | VIOLET |
| WH0000 | WHITE |
| YE0000 | YELLOW |
TTQY*JTERMINAL TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF TERMINALS FOR PROVIDING ELECTRICAL CONNECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit.
(TTQY3ABBJACD2*;TTQY3ABBJACD2$$JACD3*;TTQY3ABBJACD2$JACD2*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABB | AXIALLY AT EACH END |
| 3ABC | AXIALLY AT ONE END |
| 3ABD | BACK |
| 3ABG | END OPPOSITE CONTACT |
| 3ABH | END OPPOSITE POINT |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN89) | Reply |
| AFZ | BANANA JACK |
| ABL | BINDING POST |
| AGA | BUS (BAR) CONDUCTOR |
| ADB | CLIP |
| AFL | CRIMP |
| AFN | CRIMP AND SOLDER |
| ABR | EYELET |
| AHL | JACK |
| AAM | PIN |
| AHG | PIN JACK |
| ACR | PRINTED CIRCUIT |
| ADA | QUICK DISCONNECT, FEMALE |
| ACZ | QUICK DISCONNECT, MALE |
| ABQ | SCREW |
| AHH | SLOTTED, SOLDERLESS |
| AAS | SOLDER STUD |
| AFK | SOLDER WELL |
| AHK | SPRING CLIP |
| ABX | TAB W/SCREW |
| ABB | TAB, SOLDER LUG |
| ABC | THREADED HOLE |
| ABD | THREADED STUD |
| AHB | TIP JACK |
| ACB | TURRET |
| ACM | WIRE HOOK |
| ACC | WIRE LEAD |
| AEG | WIRE LEAD W/LUG |
| ACD | WIRE LOOP |
| AFM | WIRE WRAP |
Reference NotesRefer to Reference Drawings for assitance in answering this MRC.
IF STYLE/REPLY CODE(s) ACQ WERE ENTERED FOR MRC AXGY, YOU MUST ANSWER MRC (AEBV)
AXGYDMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM.
Enter the applicable reply code from the table below
(AXGYDACQ*;AXGYDAFL$DAHA*;AXGYDAFL$$DAHA*)
| Table 1 |
| Reply Code (AM39) | Reply |
| A | ANY ACCEPTABLE |
| ABC | BRACKET |
| AQT | CABLE |
| ABH | CLAMP |
| AFL | CLIP |
| ACR | FLANGE |
| ADJ | FORCE FIT |
| BSH | KEYED HOLE |
| BSJ | LOCK RING |
| AAD | PIN |
| BSK | RETAINING HOLE |
| BGC | RETAINING RING |
| AYW | SNAP LOCK |
| AHA | SOLDER |
| AJK | SPRING TENSION |
| ACC | TAB |
| ACD | TERMINAL |
| AFA | THREADED BUSHING |
| AHF | THREADED HOLE |
| AET | THREADED STUD |
| ACQ | UNTHREADED HOLE |
| AEW | UNTHREADED STUD |
AKPV*AMOUNTING FACILITY QUANTITY
THE NUMBER OF MOUNTING FACILITIES PROVIDED.
Enter the numeric reply with a minimum of one digit.
(AKPVA10*)
IF STYLE/REPLY CODE(s) AM OR AZ WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD and AAJF)
IF STYLE/REPLY CODE(s) DS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD and AAJF)
IF STYLE/REPLY CODE(s) SM OR SS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CTTC) or (CQJX and CQQR and CQJX and AAJE)
IF STYLE/REPLY CODE(s) NP WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJF)
IF STYLE/REPLY CODE(s) UN WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD and CMLP and AAJF)
IF STYLE/REPLY CODE(s) JC, JE, JF, NC, NE OR NF WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD and AAJF)
IF STYLE/REPLY CODE(s) NJ WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD and CMLP and AAJF)
IF STYLE/REPLY CODE(s) NS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD and CMLP and AAJF) or (CQJX and AAJE and CMLP and AAJF)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable reply code from the table below
(THSDDSS*;THSDDNE$$DNJ*)
| Table 1 |
| Reply Code (AH06) | Reply |
| AM | ACME |
| BA | BA |
| DS | DOUBLE STUB |
| SM | ISO M |
| SS | ISO S |
| NP | NPT |
| AZ | SPECIAL ACME |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNIFIED NATIONAL FINE (UNJ) |
| JF | UNIFIED NATIONAL JOINT FINE (UNJF) |
| JC | UNJC |
| JE | UNJEF |
| NS | UNS |
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJXJA2.0*;CQJXJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the alpha-numeric reply with a minimum of one character.
(AAJDAS7)
CTTC*JTHREAD TOLERANCE CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING ESTABLISHED PITCH AND CREST DIAMETER TOLERANCE POSITION AND GRADE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CTTCJEXT2.0*;CTTCJEXT2.0$$JEXT2.1*)
| Table 1 |
| Reply Code (AN73) | Reply |
| EXT | EXTERNAL |
| NTE | INTERNAL |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the alpha-numeric reply with a minimum of one character.
(CMLPAP0)
CQQR*BTHREAD PITCH IN MILLIMETERS
A MEASUREMENT OF DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CQQRB2.0*;CQQRB2.0$$BM2.0*)
AAJE*JTHREAD PITCH DIAMETERS
THE MINIMUM AND MAXIMUM PITCH DIAMETER LIMITS OF A STRAIGHT SCREW THREAD.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AAJEJAM32.0/P50.0*;AAJEJAM32.0/P50.0$$JA*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable reply code from the table below
(AAJFDAAL*;AAJFDAAG$$DAAL*)
| Table 1 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
AEBV*JUNTHREADED MOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF AN UNTHREADED MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEBVJAA2.0*;AEBVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEJN*JDISTANCE BETWEEN MOUNTING FACILITY CENTERS
THE DISTANCE BETWEEN MOUNTING FACILITY CENTERS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEJNJAA2.0*;AEJNJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKRN*JSLOT ACCOMMODATION WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE SLOT ACCOMMODATION,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKRNJAB2.0*;AKRNJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDPDA000*;PRMTDAUA000$DAGA000*;PRMTDAUA000$$DAGA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJRHA000E2.0*;PMWTJRHA000E2.0$JRHA000E2.0*;PMWTJRHA000E2.0$$JRHA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJPTA0002.0*;PMLCJPTA0002.0$JPTA0002.0*;PMLCJPTA0002.0$$JPTA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCN2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CN | CUBIC INCHES |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAE*;BBRGDAL$$DAM*)
| Table 1 |
| Reply Code (AM81) | Reply |
| AC | CLOSED SHED |
| AD | CONTROLLED HUMIDITY WAREHOUSE |
| AM | DEHUMIDIFIED WAREHOUSE |
| AE | GENERAL PURPOSE WAREHOUSE |
| AN | HEATED WAREHOUSE |
| AH | OPEN SHED |
| AL | TEMPERATURE CONTROLLED WAREHOUSE |
| AJ | UNHEATED WAREHOUSE |
BBRJ*DSPECIAL HANDLING FEATURE
THE UNUSUAL OR UNIQUE CHARACTERISTIC/S/ OR QUALITY/IES/ OF AN ITEM WHICH NECESSITATES THE ESTABLISHMENT OF A REQUIREMENT FOR SPECIAL HANDLING.
Enter the applicable reply code from the table below
(BBRJDAM*;BBRJDAB$$DAL*)
| Table 1 |
| Reply Code (AM83) | Reply |
| AB | CORROSIVE |
| AD | FLAMMABLE |
| AL | HUMIDITY CONTROLLED |
| AH | RADIOACTIVE |
| AM | SHOCK PROTECTED |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ008*;HZRDDHAZ052$$DHAZ007*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ042 | ASBESTOS |
| HAZ007 | ASPHALT |
| HAZ008 | CADMIUM |
| HAZ011 | CHROMIUM |
| HAZ027 | IRIDIUM |
| HAZ029 | LEAD |
| HAZ052 | ZINC |
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)