An equipment configuration consisting of a data processing terminal, interface, and data communication equipment. The following components and/or units may be included: input unit, output unit, computating unit, control unit, storage unit, teletypewriter, card reader, printer, document reader, data display unit, programmable terminal, autonomous processor, signal converter, and modem. The number of items belonging to a data station is determined by its application.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED34240*)
ALBYDUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter the applicable reply code from the table below
(ALBYDBHD*;ALBYDANM$DBAY*;ALBYDANM$$DBAY*)
| Table 1 |
| Reply Code (AH21) | Reply |
| BHD | AERIAL DISTRIBUTION |
| BCS | AUTOPILOT |
| BMQ | CASSETTE RECORDER/REPRODUCER |
| BAW | COMMAND POST |
| BHN | COMMUNICATION |
| BHP | CONTROL |
| BMR | DICTATING MACHINE |
| BAY | ELECTRIC EQUIPMENT |
| BAZ | ELECTRONIC EQUIPMENT |
| BKB | ENGINE ORDER |
| AJX | FIRING EXPLOSIVE CHARGES |
| BDN | FLIGHT CONTROL SYSTEM |
| ATX | INSIDE MEASUREMENT |
| BBE | MAINTENANCE EQUIPMENT |
| BHW | MATRIX ASSEMBLY INTERFACE |
| BEE | MEDICAL EQUIPMENT |
| BBF | MISSILE EQUIPMENT |
| BEK | NAVIGATIONAL EQUIPMENT |
| BEL | OFFICE MACHINE |
| ATY | OUTSIDE MEASUREMENT |
| BEP | PHOTOGRAPHIC EQUIPMENT |
| BJA | POWER |
| ANM | POWER TRANSMISSION |
| BBH | REPAIR SHOP |
| BJB | SERVICE ENTRANCE |
| BHA | WEAPONS SYSTEM COMPONENT |
CPLRDUNIT DESIGN
THE DESIGN OF THE UNIT.
Enter the applicable reply code from the table below
(CPLRDFVE*;CPLRDAJQ$$DAJR*)
| Table 1 |
| Reply Code (AK54) | Reply |
| AJQ | CABINET |
| AUB | CONSOLE |
| FVC | DESK TOP |
| FWV | DRAWER MOUNTED |
| FUY | FREE STANDING |
| AFD | PANEL MOUNTED |
| AJR | PORTABLE |
| FVE | RACK MOUNTED |
| AUJ | STORAGE CASE |
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDALA000*;MATTDSTB000$DMGA000*;MATTDSTB000$$DMGA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| MGA000 | MAGNESIUM |
| STB000 | STEEL CORROSION RESISTING |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDBL0000*;HUESDBL0000$$DBL0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| BL0000 | BLACK |
CZEH*JCOMPONENT TYPE AND QUANTITY ACCOMMODATED
INDICATES THE TYPE AND NUMBER OF COMPONENTS ACCOMMODATED BY THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CZEHJALV2*;CZEHJALV2$$JALV3*)
| Table 1 |
| Reply Code (AK95) | Reply |
| AVE | 2.5 FLOPPY DRIVE |
| AJV | 3.5 FLOPPY DRIVE |
| AKU | 5.25 FLOPPY DRIVE |
| AEU | ALPHA-NUMERIC KEYPAD |
| AVD | CENTRAL PROCESSING UNIT |
| AVH | COLOR LASER PRINTER |
| ARU | COLOR PRINTER |
| AVF | DATA STORAGE |
| AEV | DIGITIZER/GRAPHICS TABLET |
| ASS | DOT MATIX PRINTER |
| ANV | ELECTROLUMINESCENT DISPLAY |
| AVJ | ETHERNET HUB |
| AKV | EXTERNAL COMPACT DISK UNIT |
| ALU | EXTERNAL HARD DRIVE |
| AVK | FAST ETHERNET |
| AVL | FAX/MODEM |
| ALV | INTERNAL COMPACT DISK UNIT |
| AMU | INTERNAL HARD DRIVE |
| AFU | JOYSTICK |
| CGZ | KEYBOARD |
| ASV | LASER PRINTER |
| APU | LIGHT EMITTING DIODE |
| APV | LIQUID CRYSTAL |
| AUA | MODEM |
| AFV | MOUSE |
| AGU | MULTI-BUTTON CURSOR |
| AGV | OPTICAL READER |
| AQU | PLASMA PANEL |
| ATU | PLOTTER |
| AVG | REMOVABLE HARD DRIVE |
| AHU | STYLUS/LIGHT PEN |
| AMV | TAPE DRIVE |
| ATV | THERMAL PRINTER |
| AVQ | TOUCHPAD |
| AHV | TOUCHSCREEN |
| AJU | TRACKBALL |
CHWB*JACCESSORY COMPONENTS AND QUANTITY
THE NAME AND NUMBER OF ACCESSORY COMPONENTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CHWBJAGP2*;CHWBJAGP2$$JAGP3*;CHWBJAGP2$JAGP2*)
| Table 1 |
| Reply Code (AL37) | Reply |
| AGM | ANTI-GLARE SCREEN |
| AGN | CABLE ASSEMBLY |
| AGP | DUST COVER |
| AGQ | OPERATING INSTRUCTIONS |
| AGR | SCREEN CLEANER |
CYEC*DINTERFACE TYPE
INDICATES THE TYPE OF INTERFACE(S) AVAILABLE FOR INPUT/OUTPUT COMMUNICATIONS.
Enter the applicable reply code from the table below
(CYECDJN*;CYECDGW$$DGU*)
| Table 1 |
| Reply Code (AE79) | Reply |
| HE | 1553 |
| DW | BNC |
| GS | CENTRONICS |
| GV | DB 25 FEMALE |
| GW | DB 25 MALE |
| GU | DB15 |
| GT | DB9 |
| GX | DEC 425 |
| GY | DIN |
| JR | DVI-ANALOG |
| JQ | DVI-DIGITAL |
| JS | DVI-INTEGRATED |
| JD | EDGE CONNECTOR |
| HF | ESDI |
| JP | FIRE WIRE |
| JC | IDE |
| GZ | IEEE 488 |
| HG | MFM |
| JM | PS/2 SPECIAL CONNECTING PLUG |
| HA | RJ11 |
| HB | RJ45 |
| HC | RS 232C |
| HD | RS 422 |
| HJ | SCSI |
| JN | USB |
ANBK*DRECORDING METHOD
THE MEANS BY WHICH THE ITEM RECORDS INFORMATION.
Enter the applicable reply code from the table below
(ANBKDABB)
| Table 1 |
| Reply Code (AJ42) | Reply |
| ABB | DIGITAL |
| AAJ | ELECTROMECHANICAL |
| AAK | MAGNETIC |
| AAL | MECHANICAL |
| AAM | PHOTOELECTRIC |
ANWG*DRECORDING MEDIUM FOR WHICH DESIGNED
THE RECORDING MEDIUM FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(ANWGDAAE*;ANWGDAAH$$DAAA*)
| Table 1 |
| Reply Code (AK15) | Reply |
| AAD | DISK |
| AAE | FILM |
| AAH | FLASH MEMORY |
| AAA | HARD DISK |
| AAF | TAPE |
ALXW*DPRINTER TYPE
INDICATES THE TYPE OF DEVICE USED FOR FORMING PRINT.
Enter the applicable reply code from the table below
(ALXWDAMM)
| Table 1 |
| Reply Code (AE15) | Reply |
| AMJ | BAND |
| AML | DOT MATRIX |
| AMM | INK JET |
| AMN | LASER |
| AMS | THERMAL |
AKYD*GACCESSORY COMPONENTS AND QUANTITY
THE NAME AND NUMBER OF PARTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter clear text.
(AKYDGCLEARTEXT)
ALEG*DKEYBOARD TYPE
INDICATES THE TYPE OF KEYBOARD FURNISHED WITH THE ITEM.
Enter the applicable reply code from the table below
(ALEGDCS)
| Table 1 |
| Reply Code (AH35) | Reply |
| CP | AZERTY ARRANGEMENT |
| CS | BELGIAN |
| CT | DANISH |
| BE | INTERNATIONAL |
| CW | NORWEGIAN |
| BL | PORTUGUESE |
| CX | QUERTZ ARRANGEMENT |
| CQ | QWERTY ARRANGEMENT |
| CY | SWEDISH |
CYED*JMEMORY SIZE
DESIGNATES THE SIZE OF TEMPORARY DATA STORAGE AVAILABLE WITHIN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CYEDJMM2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| ML | GIGABYTES |
| MM | KILOBYTES |
| MN | MEGABYTES |
| CU | TERABYTES |
CYGW*JBUFFER SIZE
DESIGNATES THE MAXIMUM SIZE OF THE TEMPORARY DATA STORAGE CAPABILITY OF THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CYGWJMM2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| MT | BYTES |
| MU | CHARACTERS |
| ML | GIGABYTES |
| MM | KILOBYTES |
| MN | MEGABYTES |
RAMS*JRANDOM ACCESS MEMORY SIZE
DESIGNATES THE SIZE OF THE WORKING DATA STORAGE AVAILABLE WITHIN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(RAMSJML2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| ML | GIGABYTES |
| MM | KILOBYTES |
| MN | MEGABYTES |
CYHN*DDRIVE SIZE
DESIGNATES THE DRIVE SIZE INCLUDED WITH THE ITEM.
Enter the applicable reply code from the table below
(CYHNDAAC*;CYHNDAAR$DAAN*;CYHNDAAR$$DAAN*)
| Table 1 |
| Reply Code (AP82) | Reply |
| AAQ | 1.00 |
| AAR | 1.80 |
| AAN | 2.50 |
| AAC | 3.50 |
CYHQ*BTRANSFER RATE IN MEGABYTES PER SECOND
THE RATE THAT INFORMATION IS TRANSFERRED FROM ONE SOURCE TO ANOTHER,EXPRESSED IN MEGABYTES PER SECOND.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CYHQB2.0)
CYFR*BACCESS TIME IN MILLISECONDS
THE TIME REQUIRED TO POSITION THE ACCESS MECHANISM AT A SPECIFIED POSITION IN MILLISECONDS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CYFRB2.0)
BCHX*BROTOR SPEED IN RPM
THE SPEED OF THE ROTOR,EXPRESSED IN REVOLUTIONS PER MINUTE.
Enter a reply with a minimum of one digit on either side of the decimal point.
(BCHXB2.0)
AKUK*DDATA PROTECTION PROVISION TYPE
THE TYPE OF DATA PROTECTION THAT IS INCLUDED WITH THE ITEM.
Enter the applicable reply code from the table below
(AKUKDAU*;AKUKDAJ$$DAV*)
| Table 1 |
| Reply Code (AM04) | Reply |
| CU | DONGLE |
| BV | EYEPRINT |
| AJ | FINGERPRINT |
| BU | NONE |
| AA | PASSWORD |
| AU | PULSE OXIMETER |
| AV | SWITCHED |
CYHR*DHIGHEST DISPLAY CAPABILITY
INDICATES THE HIGHEST MONITOR DISPLAY CAPABILITY.
Enter the applicable reply code from the table below
(CYHRDHU)
| Table 1 |
| Reply Code (AE79) | Reply |
| HU | CGA |
| HV | EGA |
| HW | MONOCHROME |
| HX | RGB |
| HY | SVGA |
| HZ | VGA |
BFQN*DDISPLAY TYPE
INDICATES THE TYPE OF DISPLAY PROVIDED.
Enter the applicable reply code from the table below
(BFQNDFJW*;BFQNDFBU$$DFJX*)
| Table 1 |
| Reply Code (AK54) | Reply |
| FXF | CATHODE RAY TUBE |
| FBU | DIGITAL LIGHT PROCESSOR |
| FJW | LIGHT EMITTING DIODE (L.E.D.). |
| FJX | LIQUID CRYSTAL |
| FXG | PLASMA PANEL |
CYHS*BDIAGONAL DISPLAY SIZE IN INCHES
THE LENGTH OF A STRAIGHT LINE THAT RUNS FROM ONE CORNER OF THE DISPLAY SCREEN TO THE OTHER CORNER,EXPRESSED IN INCHES.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CYHSB2.0)
CYMC*JDISPLAY RESOLUTION
INDICATES THE DISPLAY RESOLUTION,EXPRESSED IN THE NUMBER OF PIXELS PER HORIZONTAL LINE BY THE NUMBER OF LINES ON A VERTICAL PLANE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CYMCJAAQ2*;CYMCJAAQ2$$JAAQ3*)
| Table 1 |
| Reply Code (AA38) | Reply |
| AAF | HORIZONTAL |
| ABW | LEFT TO RIGHT |
| ABX | RIGHT TO LEFT |
| AAP | STRAIGHT |
| ACL | UPRIGHT |
| AAQ | UPWARD |
| AAR | VERTICAL |
CYFP*JDATA STORAGE CAPACITY
THE LONG-TERM DATA STORAGE CAPABILITY OF THE ITEM SUCH AS HARD DRIVE, SSD, AND THE LIKE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CYFPJML2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| ML | GIGABYTES |
| MM | KILOBYTES |
| MN | MEGABYTES |
| CU | TERABYTES |
ACYC*JPROCESSOR CLOCK SPEED
THE CLOCK SPEED AT WHICH THE ITEM PROCESSES INFORMATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACYCJADL2.0*)
| Table 1 |
| Reply Code (AK09) | Reply |
| ADL | GIGAHERTZ |
| ADR | KILOHERTZ |
| AEC | MEGAHERTZ |
| AAA | MIPS |
AGLS*BIMAGE REFRESH RATE IN HERTZ
AN INDICATION OF HOW OFTEN THE IMAGE IS REFRESHED PER SECOND.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AGLSB2.0)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAR2)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDBSZ*;CBBLDDMF$$DAAJ*)
| Table 1 |
| Reply Code (AN47) | Reply |
| AZK | AC ADAPTER |
| DPD | CARRYING CASE |
| DSZ | CARRYING HANDLE |
| DTL | CONTROLLER BOARD |
| BEM | COVER |
| DBN | ELECTROMAGNETIC INTERFERENCE SHIELDING |
| BSZ | ELECTROSTATIC SENSITIVE |
| BDT | ELECTROSTATIC SHIELD |
| FCU | KEY LOCK |
| AAJ | MOUNTING HARDWARE |
| CKR | OVER VOLTAGE PROTECTOR |
| DVE | RECHARGEABLE BATTERY PACK |
| AGQ | RFI SHIELDING |
| FNY | ROHS DIRECTIVE COMPLIANCE |
| CEN | RUGGEDIZED |
| ENP | SELF TEST |
| ENQ | SOFTWARE |
| DMF | TEMPEST |
CSBH*JVOLTAGE IN VOLTS AND CURRENT TYPE
THE TOTAL ELECTRICAL VOLTAGE,EXPRESSED IN VOLTS,AND THE TYPE OF CURRENT WHETHER ALTERNATING OR DIRECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSBHJAD2.0*;CSBHJAD2.0$$JAD2.1*)
| Table 1 |
| Reply Code (AN87) | Reply |
| AC | AC |
| AD | AC/DC |
| DC | DC |
BDWW*JWATTAGE RATING
THE RATED POWER THAT AN ITEM CAN SAFELY CONSUME OR PROVIDE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BDWWJBC2.0*;BDWWJBC2.0$$JBC2.1*)
| Table 1 |
| Reply Code (AB49) | Reply |
| BC | KILOWATTS |
| AT | WATTS |
ARAG*JCURRENT RATING
THE AMOUNT OF CURRENT FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARAGJN2.0*)
| Table 1 |
| Reply Code (AC30) | Reply |
| A | AMPERES |
| U | MICROAMPERES |
| L | MILLIAMPERES |
| N | NANOAMPERES |
AFGA*JOPERATING TEMP RANGE
THE MINIMUM AND MAXIMUM LIMITS OF TEMPERATURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFGAJFM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
AFJQ*JSTORAGE TEMP RANGE
THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFJQJFM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAB2.0*;ABKWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AMWN*AMODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(AMWNAS1)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(PMLCJAGA0002*;PMLCJAGA0002$$JAGA0003*;PMLCJAGA0002$JAGA0002*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| GR | GRADE |
| AX | GRANULES |
| GP | GROUP |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PB | PRESSURE RATING |
| QA | QUALITY |
| RN | RANGE |
| RT | RATING |
| RF | REFERENCE NUMBER |
| BJ | RMA FLUX |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
AFJN*DFRAGILITY FACTOR
THE MEASURE OF SENSITIVITY OF THE ITEM TO BE PACKAGED. A FACTOR USED BY PACKAGING ENGINEERS IN DEVISING PROPER CUSHIONING IN A PACKAGE.
Enter the applicable reply code from the table below
(AFJNDG)
| Table 1 |
| Reply Code (AD40) | Reply |
| G | RUGGED |
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information