A band of flexible material designed as a safety measure to secure a person to a seat, or in a desired position, in an aircraft.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED33719*)
CFKHDBELT TYPE
INDICATES THE TYPE OF BELT PROVIDED.
Enter the applicable reply code from the table below
(CFKHDFLB)
| Table 1 |
| Reply Code (AK54) | Reply |
| CHD | ASSEMBLY |
| BKX | COMBINATION |
| FLC | COMBINATION LAP AND SHOULDER FOR ADULTS |
| FLD | COMBINATION LAP AND SHOULDER FOR CHILDREN |
| FLB | LAP |
| DSB | SHOULDER |
ALLGAPERSONNEL CAPACITY
THE NUMBER OF PERSONS THE ITEM WILL ACCOMMODATE.
Enter the numeric reply with a minimum of one digit.
(ALLGA10*)
ALLEJWEBBING WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE WEBBING,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ALLEJAB2.0*;ALLEJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) A WERE ENTERED FOR MRC APCS, YOU MUST ANSWER MRC (BTMR)
IF STYLE/REPLY CODE(s) C WERE ENTERED FOR MRC APCS, YOU MUST ANSWER MRC (AKGG)
APCSDADJUSTABILITY
AN INDICATION OF WHETHER OR NOT THE ITEM IS ADJUSTABLE.
Enter the applicable reply code from the table below
(APCSDA)
| Table 1 |
| Reply Code (AB00) | Reply |
| A | ADJUSTABLE |
| C | NONADJUSTABLE |
AKGG*JNOMINAL LENGTH
A NOMINAL MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKGGJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
BTMR*JADJUSTMENT MAXIMUM LENGTH
A MEASUREMENT OF THE MAXIMUM DIMENSION THE ITEM CAN BE ADJUSTED,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BTMRJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
BZXDHFASTENER MATERIAL AND LOCATION
THE ELEMENT,COMPOUND,OR MIXTURE OF WHICH THE FASTENER IS FABRICATED,EXCLUDING ANY SURFACE TREATMENT,AND ITS LOCATION.
Enter the applicable Reply Code from Tables 1 & 2 below.
(BZXDHFA0000BWZ2.0*;BZXDHFA0000BWZ2.0$HFA0000BWZ2.0*;BZXDHFA0000BWZ2.0$$HFA0000BWZ2.1*)
| Table 1 |
| Reply Code (AD09) | Reply |
| ALC000 | ALUMINUM |
| AL0000 | ALUMINUM ALLOY |
| AL0108 | ALUMINUM ALLOY, 5086 |
| AL0584 | ALUMINUM ALLOY, MIL-A-46027 |
| AL2764 | ALUMINUM ALLOY, MIL-A-46063 |
| AL1055 | ALUMINUM ALLOY, MIL-P-25995, 6061, T6 |
| AL0032 | ALUMINUM ALLOY, QQ-A-200/4, ALLOY 5083 |
| AL0994 | ALUMINUM ALLOY, QQ-A-200/8, 6061, T6 |
| AL0036 | ALUMINUM ALLOY, QQ-A-200/8, ALLOY 6061 |
| AL0132 | ALUMINUM ALLOY, QQ-A-225/8 |
| AL0059 | ALUMINUM ALLOY, QQ-A-250/11, ALLOY 6061 |
| AL0387 | ALUMINUM ALLOY, QQ-A-250/11, ALLOY 6061, T6 |
| AL0799 | ALUMINUM ALLOY, QQ-A-250/5, COMP 2024, T4 |
| AL0054 | ALUMINUM ALLOY, QQ-A-250/6, ALLOY 5083 |
| AL0357 | ALUMINUM ALLOY, QQ-A-250/6, ALLOY 5083, H323 |
| AL0982 | ALUMINUM ALLOY, QQ-A-250/6, H321 |
| AL0138 | ALUMINUM ALLOY, QQ-A-250/7 |
| AL0361 | ALUMINUM ALLOY, QQ-A-250/7, ALLOY 5086, H32 |
| AL0857 | ALUMINUM ALLOY, QQ-A-596, ALLOY A750 |
| AL1734 | ALUMINUM ALLOY, QQ-A-596, CLASS 8, T6 |
| AL1005 | ALUMINUM ALLOY, QQ-A-601, 40E, F |
| AL2407 | ALUMINUM ALLOY, QQ-A-601, ALLOY 214, TEMPER F |
| AL1061 | ALUMINUM ALLOY, WW-T-700/5 |
| AL0998 | ALUMINUM ALLOY, WW-T-700/6 |
| ALF000 | ALUMINUM, CAST |
| AAAAAA | ANY ACCEPTABLE |
| AST000 | ASBESTOS COMPOUND |
| BR0000 | BRASS |
| DFK000 | CANVAS |
| CP0000 | CARDBOARD |
| DF0000 | CLOTH |
| DFCCP0 | CLOTH, COATED |
| DF0208 | CLOTH, COATED, CCC-A-700, CLASS 6, TREATMENT A1, B, C |
| DFCCA0 | CLOTH, LAMINATED, VINYL-NYLON |
| CC0000 | COTTON |
| CCH000 | COTTON DUCK |
| CCAM00 | COTTON DUCK, CANVAS |
| CC0002 | COTTON DUCK, CCC-C-419, TYPE 1 |
| CC0029 | COTTON DUCK, CCC-C-419, TYPE 3 |
| CC0127 | COTTON DUCK, CCC-C-428, TYPE 1, CLASS 2 |
| CC0128 | COTTON DUCK, MIL-C-13489 |
| CCAAE0 | COTTON, WOVEN |
| FA0000 | FABRIC |
| FT0000 | FELT |
| FTR000 | FELT, COTTON |
| FTB000 | FELT, HAIR |
| FTQ000 | FELT, SOFT |
| FB0000 | FIBER |
| FBAE00 | FIBER, HEMP |
| FBE000 | FIBER, JUTE |
| FBF000 | FIBER, SISAL |
| FD0000 | FIBERBOARD |
| GS0000 | GLASS |
| GS0377 | GLASS, MIL-A-46108 |
| GS0319 | GLASS, MIL-G-5485 |
| HA0000 | HAIR |
| HAG000 | HAIR, ANIMAL |
| HAAAD0 | HAIR, BOUND |
| HAA000 | HAIR, CURLED |
| HAAAF0 | HAIR, CURLED, RUBBERIZED |
| HAZ000 | HAIR, GOAT |
| HAAG00 | HAIR, RUBBERIZED |
| WDAD00 | HARDBOARD |
| HAC000 | HORSEHAIR |
| FE0000 | IRON |
| FEA000 | IRON, CAST |
| FEC000 | IRON, MALLEABLE |
| FE0180 | IRON, MIL-I-11466, CLASS D4512 |
| FE0160 | IRON, QQ-I-666, GRADE 2 |
| FBM000 | KAPOK |
| LR0000 | LEATHER |
| LRA000 | LEATHER, ARTIFICIAL |
| LR0110 | LEATHER, ARTIFICIAL, CCC-A-700, CLASS 4 |
| MG0000 | MAGNESIUM |
| MGA000 | MAGNESIUM ALLOY |
| MG0108 | MAGNESIUM ALLOY, QQ-M-40, COMP ZK60A, TEMPER T5 |
| MG0111 | MAGNESIUM ALLOY, QQ-M-55, COMP AZ91C, T6 |
| MG0146 | MAGNESIUM ALLOY, QQ-M-55, COMP AZ92A |
| MG0067 | MAGNESIUM ALLOY, QQ-M-56 |
| MG0113 | MAGNESIUM ALLOY, QQ-M-56, COMP AZ91 |
| MG0112 | MAGNESIUM ALLOY, QQ-M-56, COMP AZ91C, T6 |
| MG0088 | MAGNESIUM, QQ-M-55 |
| MG0013 | MAGNESIUM, QQ-M-56, AZ91C |
| ME0000 | METAL |
| MEAJ00 | METAL, SINTERED |
| AY0000 | MICA |
| NY0000 | NYLON |
| NY0007 | NYLON, BALLISTIC, MIL-C-12369 |
| NYC000 | NYLON, COATED |
| NY0039 | NYLON, MIL-C-20696 |
| NY0041 | NYLON, MIL-C-20696, TYPE 2, CLASS 2 |
| NYD000 | NYLON, PLASTIC COATED |
| PC0000 | PLASTIC |
| PCCCCX | PLASTIC FOAM |
| PCCCF0 | PLASTIC, CELLULAR |
| PC1898 | PLASTIC, CELLULAR, MIL-I-14511 |
| PCAAAR | PLASTIC, CELLULOSE ACETATE |
| PCH000 | PLASTIC, CELLULOSE NITRATE |
| PC2911 | PLASTIC, GLASS REINFORCED, MIL-A-46166 |
| PC0455 | PLASTIC, L-P-386, TYPE 2, CLASS 1 |
| PC2646 | PLASTIC, L-P-386, TYPE 2, CLASS 2 |
| PC2473 | PLASTIC, MIL-F-81254 |
| PC0907 | PLASTIC, MIL-M-14 |
| PC1601 | PLASTIC, MIL-M-14, TYPE CFI-20 |
| PC1764 | PLASTIC, MIL-M-14, TYPE MAI-60 |
| PC2647 | PLASTIC, MIL-P-15280, FORM S |
| PC2324 | PLASTIC, MIL-P-18080 |
| PC1391 | PLASTIC, MIL-P-8013-CANCELED |
| PCAAL0 | PLASTIC, PHENOL-FORMALDEHYDE |
| PCW000 | PLASTIC, PHENOLIC |
| PCDDG0 | PLASTIC, POLYESTER FOAM |
| PCCR00 | PLASTIC, POLYETHYLENE |
| PCEEES | PLASTIC, POLYFOAM |
| PCAAR0 | PLASTIC, POLYSTYRENE FOAM |
| PCAJ00 | PLASTIC, POLYURETHANE |
| PCAAT0 | PLASTIC, POLYURETHANE FOAM |
| PCAK00 | PLASTIC, POLYVINYL CHLORIDE |
| PCAAU0 | PLASTIC, URETHANE |
| PCFFY0 | PLASTIC, URETHANE FOAM |
| PCAAAX | PLASTIC, VINYL |
| PCCN00 | PLASTIC, VINYL ACETATE |
| PW0000 | PLYWOOD |
| PW0013 | PLYWOOD, NN-P-530, DOUGLAS FIR, EXTERIOR |
| RC0000 | RUBBER |
| RCAAS0 | RUBBER FOAM |
| RC7579 | RUBBER, C473, J I CASE CO |
| RCAE00 | RUBBER, CELLULAR |
| RCH000 | RUBBER, CHLOROPRENE |
| RC0566 | RUBBER, MIL-R-3065, AMEND 1, TYPE R, CLASS RS, GRADE 515 |
| RC4358 | RUBBER, MIL-R-5001, TYPE 2, CLASS MEDIUM |
| RC0982 | RUBBER, MIL-R-6855, CLASS 2 |
| RC3367 | RUBBER, MIL-STD-417, GRADE SC515A1B1C1F1GZ |
| RC7580 | RUBBER, MIL-STD-417, GRADE SC515F2 |
| RC4271 | RUBBER, MIL-STD-417, TYPE S, CLASS SC, GRADE 515F2 |
| RCBR00 | RUBBER, POLYURETHANE |
| RC0567 | RUBBER, SAE RN609 |
| RCC000 | RUBBER, SYNTHETIC |
| DFBBN0 | SATEEN |
| SLF000 | SILICON CARBIDE |
| RCAAX0 | SPONGE RUBBER |
| ST0000 | STEEL |
| ST6341 | STEEL, AISI 1015 |
| ST6000 | STEEL, AISI 4130 |
| STAABC | STEEL, ALLOY |
| ST2537 | STEEL, AMS 5120 |
| ST8941 | STEEL, ASTM A108, GRADE 1010 |
| STD794 | STEEL, ASTM A108, GRADE 1015 |
| STD818 | STEEL, ASTM A108, GRADE 1016 |
| ST7967 | STEEL, ASTM A108, GRADE 1018 |
| STD325 | STEEL, ASTM A108, GRADE 1020 |
| STD821 | STEEL, ASTM A108, GRADE 1022 |
| STD822 | STEEL, ASTM A108, GRADE 1025 |
| ST2828 | STEEL, ASTM A109 |
| STD659 | STEEL, ASTM A512, GRADE MT1010 |
| STF604 | STEEL, ASTM A512, GRADE MT1015 |
| STF606 | STEEL, ASTM A512, GRADE MT1020 |
| STF605 | STEEL, ASTM A512, GRADE MTX1015 |
| STD660 | STEEL, ASTM A512, GRADE MTX1020 |
| STD661 | STEEL, ASTM A513, GRADE MT1010 |
| STF609 | STEEL, ASTM A513, GRADE MT1015 |
| STD662 | STEEL, ASTM A513, GRADE MT1020 |
| STF610 | STEEL, ASTM A513, GRADE MTX1015 |
| STD663 | STEEL, ASTM A519, GRADE MT1010, COND HR |
| STF520 | STEEL, ASTM A519, GRADE MT1015 |
| STF521 | STEEL, ASTM A519, GRADE MT1020 |
| STD664 | STEEL, ASTM A519, GRADE MT1020, COND HR |
| STF613 | STEEL, ASTM A519, GRADE MTX1015 |
| STF352 | STEEL, ASTM A575, GRADE M1010 |
| STF353 | STEEL, ASTM A575, GRADE M1012 |
| STF354 | STEEL, ASTM A575, GRADE M1015 |
| STF355 | STEEL, ASTM A575, GRADE M1017 |
| STF356 | STEEL, ASTM A575, GRADE M1020 |
| STF357 | STEEL, ASTM A575, GRADE M1023 |
| STF358 | STEEL, ASTM A575, GRADE M1025 |
| STF369 | STEEL, ASTM A576, GRADE 1010 |
| STF370 | STEEL, ASTM A576, GRADE 1012 |
| STF371 | STEEL, ASTM A576, GRADE 1015 |
| STF372 | STEEL, ASTM A576, GRADE 1016 |
| STF373 | STEEL, ASTM A576, GRADE 1017 |
| STF374 | STEEL, ASTM A576, GRADE 1018 |
| STF523 | STEEL, ASTM A576, GRADE 1019 |
| STF375 | STEEL, ASTM A576, GRADE 1020 |
| STF524 | STEEL, ASTM A576, GRADE 1021 |
| STF525 | STEEL, ASTM A576, GRADE 1022 |
| STF376 | STEEL, ASTM A576, GRADE 1023 |
| STF377 | STEEL, ASTM A576, GRADE 1025 |
| ST8953 | STEEL, ASTM A7-CANCELED |
| STB000 | STEEL, CORROSION RESISTING |
| ST1930 | STEEL, FED STD 66, AISI/SAE 1020 |
| ST3548 | STEEL, FED STD 66, COMP 1010 |
| ST6060 | STEEL, FED STD 66, COMP 1011 |
| ST6061 | STEEL, FED STD 66, COMP 1012 |
| ST6063 | STEEL, FED STD 66, COMP 1013 |
| ST6064 | STEEL, FED STD 66, COMP 1015 |
| ST6068 | STEEL, FED STD 66, COMP 1016 |
| ST6069 | STEEL, FED STD 66, COMP 1017 |
| ST6071 | STEEL, FED STD 66, COMP 1018 |
| ST6072 | STEEL, FED STD 66, COMP 1019 |
| ST6073 | STEEL, FED STD 66, COMP 1020 |
| ST6077 | STEEL, FED STD 66, COMP 1021 |
| ST6078 | STEEL, FED STD 66, COMP 1022 |
| ST6079 | STEEL, FED STD 66, COMP 1023 |
| ST6081 | STEEL, FED STD 66, COMP 1024 |
| ST6082 | STEEL, FED STD 66, COMP 1025 |
| ST7635 | STEEL, MIL-A-12560 |
| ST1428 | STEEL, MIL-S-11310, COMP CS1008 |
| ST8463 | STEEL, MIL-S-18729, COND A |
| ST7640 | STEEL, MIL-S-46099 |
| STC645 | STEEL, MS395, CHRYSLER CORP |
| STB874 | STEEL, QQ-S-631, COMP 1075-CANCELED |
| ST2312 | STEEL, QQ-S-631, COMP 1080-CANCELED |
| STB885 | STEEL, QQ-S-634, COMP 1075-CANCELED |
| STD198 | STEEL, QQ-S-634, COMP 1080-CANCELED |
| ST0942 | STEEL, QQ-S-635, COMP 1020 |
| ST2134 | STEEL, QQ-S-681, CLASS 120-95 |
| ST0977 | STEEL, QQ-S-698 |
| ST0946 | STEEL, QQ-S-698, COMP 1008 |
| ST0947 | STEEL, QQ-S-698, COMP 1009 |
| ST0948 | STEEL, QQ-S-698, COMP 1015 |
| ST8770 | STEEL, QQ-S-698, COND CR, TEMPER 4 |
| ST8772 | STEEL, QQ-S-698, COND CR, TEMPER 5 |
| STC162 | STEEL, QQ-S-698, COND HRCQPO |
| ST4074 | STEEL, QQ-S-777, COMP 1065-CANCELED |
| ST4075 | STEEL, QQ-S-777, COMP 1075-CANCELED |
| ST6559 | STEEL, SAE 1010 |
| ST6015 | STEEL, SAE 1020 |
| ST6568 | STEEL, SAE 1025 |
| ST6592 | STEEL, SAE 1065 |
| ST6598 | STEEL, SAE 1085 |
| STF000 | STEEL, SPRING |
| STD000 | STEEL, STAINLESS |
| TT0189 | TITANIUM ALLOY, MIL-A-46077 |
| WD0000 | WOOD |
| WD0011 | WOOD, MIL-W-3912, CLASS A |
| YA0000 | YARN |
| ZN0000 | ZINC |
| Table 2 |
| Reply Code (AJ91) | Reply |
| BWZ | BUCKLE |
| DMG | LATCH |
| BXA | LINK |
CSQFDINSTALLATION METHOD
THE MEANS BY WHICH THE ITEM IS INSTALLED.
Enter the applicable reply code from the table below
(CSQFDALJ)
| Table 1 |
| Reply Code (AB89) | Reply |
| ALJ | PERMANENT ANCHORAGE |
| ALK | QUICK DISCONNECT |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDGR0011*;HUESDBU0312$DSL0000*;HUESDBU0312$$DSL0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| A | ANY ACCEPTABLE |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BU0312 | BLUE, US AIR FORCE |
| BR0000 | BROWN |
| MS0240 | BUFF, DEEP |
| CL0000 | CLEAR |
| MS0226 | FAWN |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0020 | GREEN, DARK |
| GR0024 | GREEN, FOREST |
| GR0011 | GREEN, OLIVE |
| GR0132 | GREEN, SPANISH |
| VY0000 | IVORY |
| LD0008 | OLIVE |
| LD0000 | OLIVE DRAB |
| SL0000 | SILVER |
| TA0000 | TAN |
| WH0000 | WHITE |
| YE0000 | YELLOW |
CSXC*DRETRACTOR TYPE
INDICATES THE TYPE OF RETRACTOR PROVIDED.
Enter the applicable reply code from the table below
(CSXCDABE)
| Table 1 |
| Reply Code (AL19) | Reply |
| ABD | AUTOMATIC LOCKING |
| ABE | EMERGENCY LOCKING |
| ABF | NONLOCKING |
BTMW*DCARTRIDGE CASE TYPE
INDICATES THE TYPE OF CARTRIDGE CASE PROVIDED.
Enter the applicable reply code from the table below
(BTMWDCGW)
| Table 1 |
| Reply Code (AK54) | Reply |
| CGY | M46 |
| CGX | MK15 |
| CGW | MK3 MOD O DELAY |
BTMX*JCABLE ASSEMBLY LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE CABLE ASSEMBLY,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BTMXJAA2.0*;BTMXJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDBMN*;CBBLDBMM$$DBMN*)
| Table 1 |
| Reply Code (AN47) | Reply |
| BMM | ACTUATING ASSEMBLY |
| BMN | CARTRIDGE OPERATED AUTOMATIC RELEASE |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| GR | GRADE |
| AX | GRANULES |
| GP | GROUP |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PB | PRESSURE RATING |
| QA | QUALITY |
| RN | RANGE |
| RT | RATING |
| RF | REFERENCE NUMBER |
| BJ | RMA FLUX |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ030*;HZRDDHAZ285$$DHAZ222*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ222 | IRON |
| HAZ092 | MAGNESIUM |
| HAZ030 | MAGNESIUM ALLOY |
| HAZ285 | PLASTIC |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information