A device designed to prevent the escape of sparks from the exhaust of reciprocating internal combustion engines. It functions by trapping glowing carbon particles from exhaust gases in a receptacle that can be serviced.
expandFSC Information
2990Miscellaneous Engine Accessories, Nonaircraft
expandColloquial Information
No Colloquials assigned to this Approve Item Name at this time
expandChange List
ISAC Reply 3AEE added to MRC ACQW.
ISAC Reply 3DRN added to MRC ACQW.
ISAC Reply 3HIS added to MRC ACQW.
ISAC Reply 3HOU added to MRC ACQW.
ISAC Reply 1A deleted from MRC ACQW.
ISAC Reply 1B deleted from MRC ACQW.
ISAC Reply 1C deleted from MRC ACQW.
ISAC Reply 1D deleted from MRC ACQW.
ISAC Reply 1E deleted from MRC ACQW.
ISAC Reply 1F deleted from MRC ACQW.
ISAC Reply 1G deleted from MRC ACQW.
ISAC Reply 1H deleted from MRC ACQW.
ISAC Reply 1J deleted from MRC ACQW.
ISAC Reply 3AEE added to MRC ARNJ.
ISAC Reply 3DRN added to MRC ARNJ.
ISAC Reply 3HOU added to MRC ARNJ.
ISAC Reply 1A deleted from MRC ARNJ.
ISAC Reply 1B deleted from MRC ARNJ.
ISAC Reply 1C deleted from MRC ARNJ.
ISAC Reply 1D deleted from MRC ARNJ.
ISAC Reply 1E deleted from MRC ARNJ.
ISAC Reply 1F deleted from MRC ARNJ.
ISAC Reply 1G deleted from MRC ARNJ.
ISAC Reply 1H deleted from MRC ARNJ.
ISAC Reply 1J deleted from MRC ARNJ.
ISAC Reply 3AEE added to MRC ARNK.
ISAC Reply 3DRN added to MRC ARNK.
ISAC Reply 3HIS added to MRC ARNK.
ISAC Reply 3HOU added to MRC ARNK.
ISAC Reply 1A deleted from MRC ARNK.
ISAC Reply 1B deleted from MRC ARNK.
ISAC Reply 1C deleted from MRC ARNK.
ISAC Reply 1D deleted from MRC ARNK.
ISAC Reply 1E deleted from MRC ARNK.
ISAC Reply 1F deleted from MRC ARNK.
ISAC Reply 1G deleted from MRC ARNK.
ISAC Reply 1H deleted from MRC ARNK.
ISAC Reply 1J deleted from MRC ARNK.
ISAC Reply 3AEE added to MRC ARNL.
ISAC Reply 3DRN added to MRC ARNL.
ISAC Reply 3HOU added to MRC ARNL.
ISAC Reply 1A deleted from MRC ARNL.
ISAC Reply 1B deleted from MRC ARNL.
ISAC Reply 1C deleted from MRC ARNL.
ISAC Reply 1D deleted from MRC ARNL.
ISAC Reply 1E deleted from MRC ARNL.
ISAC Reply 1F deleted from MRC ARNL.
ISAC Reply 1G deleted from MRC ARNL.
ISAC Reply 1H deleted from MRC ARNL.
ISAC Reply 1J deleted from MRC ARNL.
ISAC Reply 3AEE added to MRC ARNM.
ISAC Reply 3DRN added to MRC ARNM.
ISAC Reply 3HIS added to MRC ARNM.
ISAC Reply 3HOU added to MRC ARNM.
ISAC Reply 1A deleted from MRC ARNM.
ISAC Reply 1B deleted from MRC ARNM.
ISAC Reply 1C deleted from MRC ARNM.
ISAC Reply 1D deleted from MRC ARNM.
ISAC Reply 1E deleted from MRC ARNM.
ISAC Reply 1F deleted from MRC ARNM.
ISAC Reply 1G deleted from MRC ARNM.
ISAC Reply 1H deleted from MRC ARNM.
ISAC Reply 1J deleted from MRC ARNM.
ISAC Reply 3AEE added to MRC ARNN.
ISAC Reply 3DRN added to MRC ARNN.
ISAC Reply 3HIS added to MRC ARNN.
ISAC Reply 3HOU added to MRC ARNN.
ISAC Reply 1A deleted from MRC ARNN.
ISAC Reply 1B deleted from MRC ARNN.
ISAC Reply 1C deleted from MRC ARNN.
ISAC Reply 1D deleted from MRC ARNN.
ISAC Reply 1E deleted from MRC ARNN.
ISAC Reply 1F deleted from MRC ARNN.
ISAC Reply 1G deleted from MRC ARNN.
ISAC Reply 1H deleted from MRC ARNN.
ISAC Reply 1J deleted from MRC ARNN.
ISAC Reply 3AEE added to MRC ARNW.
ISAC Reply 3DRN added to MRC ARNW.
ISAC Reply 3HOU added to MRC ARNW.
ISAC Reply 1A deleted from MRC ARNW.
ISAC Reply 1B deleted from MRC ARNW.
ISAC Reply 1C deleted from MRC ARNW.
ISAC Reply 1D deleted from MRC ARNW.
ISAC Reply 1E deleted from MRC ARNW.
ISAC Reply 1F deleted from MRC ARNW.
ISAC Reply 1G deleted from MRC ARNW.
ISAC Reply 1H deleted from MRC ARNW.
ISAC Reply 1J deleted from MRC ARNW.
ISAC Reply 3AEE added to MRC ARNX.
ISAC Reply 3DRN added to MRC ARNX.
ISAC Reply 3HOU added to MRC ARNX.
ISAC Reply 1A deleted from MRC ARNX.
ISAC Reply 1B deleted from MRC ARNX.
ISAC Reply 1C deleted from MRC ARNX.
ISAC Reply 1D deleted from MRC ARNX.
ISAC Reply 1E deleted from MRC ARNX.
ISAC Reply 1F deleted from MRC ARNX.
ISAC Reply 1G deleted from MRC ARNX.
ISAC Reply 1H deleted from MRC ARNX.
ISAC Reply 1J deleted from MRC ARNX.
ISAC Reply 1A deleted from MRC ARSP.
ISAC Reply 1B deleted from MRC ARSP.
ISAC Reply 1C deleted from MRC ARSP.
ISAC Reply 1D deleted from MRC ARSP.
ISAC Reply 1E deleted from MRC ARSP.
ISAC Reply 1F deleted from MRC ARSP.
ISAC Reply 1G deleted from MRC ARSP.
ISAC Reply 1H deleted from MRC ARSP.
ISAC Reply 1J deleted from MRC ARSP.
ISAC Reply 1A deleted from MRC ARSQ.
ISAC Reply 1B deleted from MRC ARSQ.
ISAC Reply 1C deleted from MRC ARSQ.
ISAC Reply 1D deleted from MRC ARSQ.
ISAC Reply 1E deleted from MRC ARSQ.
ISAC Reply 1F deleted from MRC ARSQ.
ISAC Reply 1G deleted from MRC ARSQ.
ISAC Reply 1H deleted from MRC ARSQ.
ISAC Reply 1J deleted from MRC ARSQ.
ISAC Reply 3AEE added to MRC ARTE.
ISAC Reply 3DRN added to MRC ARTE.
ISAC Reply 3HIS added to MRC ARTE.
ISAC Reply 3HOU added to MRC ARTE.
ISAC Reply 1A deleted from MRC ARTE.
ISAC Reply 1B deleted from MRC ARTE.
ISAC Reply 1C deleted from MRC ARTE.
ISAC Reply 1D deleted from MRC ARTE.
ISAC Reply 1E deleted from MRC ARTE.
ISAC Reply 1F deleted from MRC ARTE.
ISAC Reply 1G deleted from MRC ARTE.
ISAC Reply 1H deleted from MRC ARTE.
ISAC Reply 1J deleted from MRC ARTE.
ISAC Reply 3AEE added to MRC ARTH.
ISAC Reply 3DRN added to MRC ARTH.
ISAC Reply 3HIS added to MRC ARTH.
ISAC Reply 3HOU added to MRC ARTH.
ISAC Reply 1A deleted from MRC ARTH.
ISAC Reply 1B deleted from MRC ARTH.
ISAC Reply 1C deleted from MRC ARTH.
ISAC Reply 1D deleted from MRC ARTH.
ISAC Reply 1E deleted from MRC ARTH.
ISAC Reply 1F deleted from MRC ARTH.
ISAC Reply 1G deleted from MRC ARTH.
ISAC Reply 1H deleted from MRC ARTH.
ISAC Reply 1J deleted from MRC ARTH.
ISAC Reply 3AEE added to MRC ARTJ.
ISAC Reply 3DRN added to MRC ARTJ.
ISAC Reply 3HIS added to MRC ARTJ.
ISAC Reply 3HOU added to MRC ARTJ.
ISAC Reply 1A deleted from MRC ARTJ.
ISAC Reply 1B deleted from MRC ARTJ.
ISAC Reply 1C deleted from MRC ARTJ.
ISAC Reply 1D deleted from MRC ARTJ.
ISAC Reply 1E deleted from MRC ARTJ.
ISAC Reply 1F deleted from MRC ARTJ.
ISAC Reply 1G deleted from MRC ARTJ.
ISAC Reply 1H deleted from MRC ARTJ.
ISAC Reply 1J deleted from MRC ARTJ.
ISAC Reply 3AEE added to MRC ARTK.
ISAC Reply 3DRN added to MRC ARTK.
ISAC Reply 3HIS added to MRC ARTK.
ISAC Reply 3HOU added to MRC ARTK.
ISAC Reply 1A deleted from MRC ARTK.
ISAC Reply 1B deleted from MRC ARTK.
ISAC Reply 1C deleted from MRC ARTK.
ISAC Reply 1D deleted from MRC ARTK.
ISAC Reply 1E deleted from MRC ARTK.
ISAC Reply 1F deleted from MRC ARTK.
ISAC Reply 1G deleted from MRC ARTK.
ISAC Reply 1H deleted from MRC ARTK.
ISAC Reply 1J deleted from MRC ARTK.
ISAC Reply 3AEE added to MRC ARTL.
ISAC Reply 3DRN added to MRC ARTL.
ISAC Reply 3HOU added to MRC ARTL.
ISAC Reply 1A deleted from MRC ARTL.
ISAC Reply 1B deleted from MRC ARTL.
ISAC Reply 1C deleted from MRC ARTL.
ISAC Reply 1D deleted from MRC ARTL.
ISAC Reply 1E deleted from MRC ARTL.
ISAC Reply 1F deleted from MRC ARTL.
ISAC Reply 1G deleted from MRC ARTL.
ISAC Reply 1H deleted from MRC ARTL.
ISAC Reply 1J deleted from MRC ARTL.
ISAC Reply 3AEE added to MRC ARTM.
ISAC Reply 3DRN added to MRC ARTM.
ISAC Reply 3HOU added to MRC ARTM.
ISAC Reply 1A deleted from MRC ARTM.
ISAC Reply 1B deleted from MRC ARTM.
ISAC Reply 1C deleted from MRC ARTM.
ISAC Reply 1D deleted from MRC ARTM.
ISAC Reply 1E deleted from MRC ARTM.
ISAC Reply 1F deleted from MRC ARTM.
ISAC Reply 1G deleted from MRC ARTM.
ISAC Reply 1H deleted from MRC ARTM.
ISAC Reply 1J deleted from MRC ARTM.
ISAC Reply 1A deleted from MRC ARTN.
ISAC Reply 1B deleted from MRC ARTN.
ISAC Reply 1C deleted from MRC ARTN.
ISAC Reply 1D deleted from MRC ARTN.
ISAC Reply 1E deleted from MRC ARTN.
ISAC Reply 1F deleted from MRC ARTN.
ISAC Reply 1G deleted from MRC ARTN.
ISAC Reply 1H deleted from MRC ARTN.
ISAC Reply 1J deleted from MRC ARTN.
ISAC Reply 1A deleted from MRC ARTR.
ISAC Reply 1B deleted from MRC ARTR.
ISAC Reply 1C deleted from MRC ARTR.
ISAC Reply 1D deleted from MRC ARTR.
ISAC Reply 1E deleted from MRC ARTR.
ISAC Reply 1F deleted from MRC ARTR.
ISAC Reply 1G deleted from MRC ARTR.
ISAC Reply 1H deleted from MRC ARTR.
ISAC Reply 1J deleted from MRC ARTR.
ISAC Reply 1A deleted from MRC ARTT.
ISAC Reply 1B deleted from MRC ARTT.
ISAC Reply 1C deleted from MRC ARTT.
ISAC Reply 1D deleted from MRC ARTT.
ISAC Reply 1E deleted from MRC ARTT.
ISAC Reply 1F deleted from MRC ARTT.
ISAC Reply 1G deleted from MRC ARTT.
ISAC Reply 1H deleted from MRC ARTT.
ISAC Reply 1J deleted from MRC ARTT.
ISAC Reply 1A deleted from MRC ARTW.
ISAC Reply 1B deleted from MRC ARTW.
ISAC Reply 1C deleted from MRC ARTW.
ISAC Reply 1D deleted from MRC ARTW.
ISAC Reply 1E deleted from MRC ARTW.
ISAC Reply 1F deleted from MRC ARTW.
ISAC Reply 1G deleted from MRC ARTW.
ISAC Reply 1H deleted from MRC ARTW.
ISAC Reply 1J deleted from MRC ARTW.
ISAC Reply 1A deleted from MRC ARTX.
ISAC Reply 1B deleted from MRC ARTX.
ISAC Reply 1C deleted from MRC ARTX.
ISAC Reply 1D deleted from MRC ARTX.
ISAC Reply 1E deleted from MRC ARTX.
ISAC Reply 1F deleted from MRC ARTX.
ISAC Reply 1G deleted from MRC ARTX.
ISAC Reply 1H deleted from MRC ARTX.
ISAC Reply 1J deleted from MRC ARTX.
ISAC Reply 1A deleted from MRC ARTY.
ISAC Reply 1B deleted from MRC ARTY.
ISAC Reply 1C deleted from MRC ARTY.
ISAC Reply 1D deleted from MRC ARTY.
ISAC Reply 1E deleted from MRC ARTY.
ISAC Reply 1F deleted from MRC ARTY.
ISAC Reply 1G deleted from MRC ARTY.
ISAC Reply 1H deleted from MRC ARTY.
ISAC Reply 1J deleted from MRC ARTY.
ISAC Reply 3AEE added to MRC ARWA.
ISAC Reply 3HIS added to MRC ARWA.
ISAC Reply 3HOU added to MRC ARWA.
ISAC Reply 1A deleted from MRC ARWA.
ISAC Reply 1B deleted from MRC ARWA.
ISAC Reply 1C deleted from MRC ARWA.
ISAC Reply 1D deleted from MRC ARWA.
ISAC Reply 1E deleted from MRC ARWA.
ISAC Reply 1F deleted from MRC ARWA.
ISAC Reply 1G deleted from MRC ARWA.
ISAC Reply 1H deleted from MRC ARWA.
ISAC Reply 1J deleted from MRC ARWA.
ISAC Reply 3AEE added to MRC AJLW.
ISAC Reply 3DRN added to MRC AJLW.
ISAC Reply 3HIS added to MRC AJLW.
ISAC Reply 3HOU added to MRC AJLW.
ISAC Reply 1A deleted from MRC AJLW.
ISAC Reply 1B deleted from MRC AJLW.
ISAC Reply 1C deleted from MRC AJLW.
ISAC Reply 1D deleted from MRC AJLW.
ISAC Reply 1E deleted from MRC AJLW.
ISAC Reply 1F deleted from MRC AJLW.
ISAC Reply 1G deleted from MRC AJLW.
ISAC Reply 1H deleted from MRC AJLW.
ISAC Reply 1J deleted from MRC AJLW.
MRC ARNP has been deleted
MRC ARNR has been deleted
MRC ARNS has been deleted
MRC ARTP has been deleted
MRC ARTS has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED32362*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDPCA000*;MATTDALA000$DSTA000*;MATTDALA000$$DSTA000*)
Table 1
Reply Code (MA01)Reply
ALA000ALUMINUM
CUB000COPPER ALLOY
PCA000PLASTIC
STA000STEEL
STB000STEEL CORROSION RESISTING
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
Table 1
Reply Code (AP33)Reply
QAEROSPACE MATERIAL SPEC STD
JAMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
GASSN STD
ACOMMERCIAL ITEM DESCRIPTION
KDEF STAN/SPEC
BFED SPEC
CFED STD
LGOVERNMENT STD/SPEC
NINTERNATIONAL STD/SPEC
FMFR REF
DMIL SPEC
EMIL STD
HNATIONAL SPEC
PNATIONAL STD
MNATIONAL STD/SPEC
Table 2
Reply Code (AP18)Reply
M10TH MATERIAL RESPONSE
N11TH MATERIAL RESPONSE
P12TH MATERIAL RESPONSE
Q13TH MATERIAL RESPONSE
R14TH MATERIAL RESPONSE
S15TH MATERIAL RESPONSE
T16TH MATERIAL RESPONSE
U17TH MATERIAL RESPONSE
W18TH MATERIAL RESPONSE
X19TH MATERIAL RESPONSE
B1ST MATERIAL RESPONSE
Y20TH MATERIAL RESPONSE
Z21ST MATERIAL RESPONSE
V22ND MATERIAL RESPONSE
C2ND MATERIAL RESPONSE
D3RD MATERIAL RESPONSE
E4TH MATERIAL RESPONSE
F5TH MATERIAL RESPONSE
H6TH MATERIAL RESPONSE
J7TH MATERIAL RESPONSE
K8TH MATERIAL RESPONSE
L9TH MATERIAL RESPONSE
GALL MATERIAL RESPONSES
ASINGLE MATERIAL RESPONSE
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
Table 1
Reply Code (AP33)Reply
GASSN STD
ACOMMERCIAL ITEM DESCRIPTION
KDEF STAN/SPEC
BFED SPEC
CFED STD
LGOVERNMENT STD/SPEC
NINTERNATIONAL STD/SPEC
FMFR REF
DMIL SPEC
EMIL STD
HNATIONAL SPEC
PNATIONAL STD
MNATIONAL STD/SPEC
Table 2
Reply Code (AP39)Reply
M10TH TREATMENT RESPONSE
N11TH TREATMENT RESPONSE
P12TH TREATMENT RESPONSE
Q13TH TREATMENT RESPONSE
R14TH TREATMENT RESPONSE
S15TH TREATMENT RESPONSE
B1ST TREATMENT RESPONSE
C2ND TREATMENT RESPONSE
D3RD TREATMENT RESPONSE
E4TH TREATMENT RESPONSE
F5TH TREATMENT RESPONSE
H6TH TREATMENT RESPONSE
J7TH TREATMENT RESPONSE
K8TH TREATMENT RESPONSE
L9TH TREATMENT RESPONSE
GALL TREATMENT RESPONSES
ASINGLE TREATMENT RESPONSE
CQPHDDEVICE DESIGN TYPE
INDICATES THE DESIGN TYPE OF THE DEVICE.
Enter the applicable reply code from the table below
(CQPHDAC)
Table 1
Reply Code (AL58)Reply
ABBAFFLE
ACDIRECTIONAL VANE
AKWIRE SCREEN
IF STYLE/REPLY CODE(s) RD WERE ENTERED FOR MRC ARNG, YOU MUST ANSWER MRC (ABHP and ADAV)
IF STYLE/REPLY CODE(s) BT, RT OR TA WERE ENTERED FOR MRC ARNG, YOU MUST ANSWER MRC (ABHP and ABMK and ABKW)
ARNGDBODY SHAPE
THE PHYSICAL CONFIGURATION OF THE BODY.
Enter the applicable reply code from the table below
(ARNGDRD)
Table 1
Reply Code (AD07)Reply
AJGIRREGULAR
BTOVAL
RTRECTANGULAR
RDROUND
TATAPERED
ARNHDOPERATING POSITION
THE POSITION IN WHICH THE ITEM IS DESIGNED TO OPERATE.
Enter the applicable reply code from the table below
(ARNHDAX)
Table 1
Reply Code (AF63)Reply
ACHORIZONTAL
AXUNIVERSAL
ABVERTICAL
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDALB000*;SFTTDALA000$DCDA000*;SFTTDALA000$$DCDA000*)
Table 1
Reply Code (SF01)Reply
ALB000ALUMINUM
ALA000ALUMINUM ALLOY
CDA000CADMIUM
ENA000ENAMEL
PNA000PAINT
PNB000PAINT HEAT RESISTANT
PSA000PASSIVATE
PCAA00PLASTIC POLYPROPYLENE
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAA2.0*;ADAVJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAB2.0*;ABKWJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
IF STYLE/REPLY CODE(s) BG WERE ENTERED FOR MRC ACQW, YOU MUST ANSWER MRC (ARNJ and ARNK and ARNW and ARNX and ACRX and ARSP)
IF STYLE/REPLY CODE(s) BH WERE ENTERED FOR MRC ACQW, YOU MUST ANSWER MRC (ARNJ and ARNK and ARSQ and ARTE)
ACQW*DINLET CONNECTION TYPE
A NARRATIVE DESCRIPTION OF THE TYPE OF INLET CONNECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ACQW3DRNDBF*;ACQW3DRNDBF$DDS*;ACQW3DRNDBF$$DDS*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DRNSINGLE INLET
3HISFIRST OUTLET
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AB76)Reply
BFFLANGE
DSRECTANGULAR HOLE
BGTHREADED
BHUNTHREADED
ARNJ*GINLET LOCATION
THE LOCATION OF THE INLET.
Enter the applicable ISAC from the table below, followed by the Mode Code and the clear text reply.
(ARNJ3AEEGCLEARTEXT)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DRNSINGLE INLET
3HOULOCATION NOT OTHERWISE SPECIFIED
ARNK*JINLET PROJECTION LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE INLET PROJECTION,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARNK3DRNJAB2.0*;ARNK3DRNJAB2.0$JAB2.0*;ARNK3DRNJAB2.0$$JAB2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DRNSINGLE INLET
3HISFIRST OUTLET
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ARNL*DINLET FLANGE SHAPE
THE PHYSICAL CONFIGURATION OF THE INLET FLANGE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARNL3DRNDBT*;ARNL3DRNDBT$DSQ*;ARNL3DRNDBT$$DSQ*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DRNSINGLE INLET
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AD07)Reply
BTOVAL
HFRECTANGLE
RDROUND
SQSQUARE
TRTRIANGULAR
ARNM*JINLET FLANGE MOUNTING PROVISION AND QUANTITY
THE TYPE AND NUMBER OF INLET FLANGE MOUNTING PROVISIONS PROVIDED.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit.
(ARNM3HISJGG2*;ARNM3HISJGG2$$JGG3*;ARNM3HISJGG2$JGG2*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DRNSINGLE INLET
3HISFIRST OUTLET
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AB89)Reply
GYHOLES
GGSTUDS
ARNN*JINLET FLANGE MOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE PASSING THROUGH THE CENTER OF AN INLET FLANGE MOUNTING HOLE,AND TERMINATING AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARNN3AEEJAA2.0*;ARNN3AEEJAA2.0$JAA2.0*;ARNN3AEEJAA2.0$$JAA2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DRNSINGLE INLET
3HISFIRST OUTLET
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ARNQ*AINLET FLANGE MOUNTING PROVISION THREAD SIZE
DESIGNATES THE THREAD DIAMETER AND NUMBER OF THREADS PER MEASUREMENT SCALE OF THE INLET FLANGE MOUNTING PROVISION.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(ARNQ1DAK4)
Table 1
ISAC Field Indicator (0362)Location
1ASINGLE INLET
1B1ST OUTLET
1C2ND OUTLET
1D3RD OUTLET
1E4TH OUTLET
1F5TH OUTLET
1G6TH OUTLET
1H7TH OUTLET
1J8TH OUTLET
ARNT*GINLET FLANGE MOUNTING PROVISION SPACING
THE SPACING OF THE INLET FLANGE MOUNTING PROVISION.
Enter the applicable ISAC from the table below, followed by the Mode Code and the clear text reply.
(ARNT1AGCLEARTEXT)
Table 1
ISAC Field Indicator (0362)Location
1ASINGLE INLET
1B1ST OUTLET
1C2ND OUTLET
1D3RD OUTLET
1E4TH OUTLET
1F5TH OUTLET
1G6TH OUTLET
1H7TH OUTLET
1J8TH OUTLET
ARNW*AINLET THREAD SIZE
DESIGNATES THE THREAD DIAMETER AND QUANTITY OF THREADS PER SPECIFIC MEASUREMENT SCALE.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(ARNW3AEEAJ0)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DRNSINGLE INLET
3HOULOCATION NOT OTHERWISE SPECIFIED
ARNX*DINLET THREAD SERIES DESIGNATOR
A DESIGNATION INDICATING THE DIAMETER-PITCH AND THE NUMBER OF THREADS PER SPECIFIC MEASUREMENT SCALE APPLIED TO A SERIES OF SPECIFIC DIAMETERS OF AN INLET.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARNX3AEEDNC*;ARNX3AEEDNC$DSP*;ARNX3AEEDNC$$DSP*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DRNSINGLE INLET
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AH06)Reply
NQNEF
SPNPS
SCNPSC
NPNPT
NTNPTF
NCUNC
NFUNF
ACRX*DINLET THREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ACRX1BDR)
Table 1
ISAC Field Indicator (0362)Location
1ASINGLE INLET
1B1ST OUTLET
1C2ND OUTLET
1D3RD OUTLET
1E4TH OUTLET
1F5TH OUTLET
1G6TH OUTLET
1H7TH OUTLET
1J8TH OUTLET
Table 2
Reply Code (AA38)Reply
LLEFT-HAND
RRIGHT-HAND
ARSP*DINLET THREAD LOCATION
INDICATES THE LOCATION OF THE THREAD ON THE INLET.
Enter the applicable reply code from the table below
(ARSPDABX*;ARSPDABY$DABX*;ARSPDABY$$DABX*)
Table 1
Reply Code (AJ91)Reply
ABYEXTERNAL
ABXINTERNAL
ARSQ*JINLET OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE INLET,WITH TERMINATED POINTS ON THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARSQJAB2.0*;ARSQJAB2.0$JAB2.0*;ARSQJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ARTE*JINLET INSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE INLET,WITH TERMINATED POINTS ON THE INSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARTE3HISJAC2.0*;ARTE3HISJAC2.0$JAC2.0*;ARTE3HISJAC2.0$$JAC2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DRNSINGLE INLET
3HISFIRST OUTLET
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
IF STYLE/REPLY CODE(s) BG WERE ENTERED FOR MRC ARTH, YOU MUST ANSWER MRC (ARTJ and ARTK and ARTW and ARTX and ARTY and ARTZ)
IF STYLE/REPLY CODE(s) BH WERE ENTERED FOR MRC ARTH, YOU MUST ANSWER MRC (ARTJ and ARTK and ARWA and AJLW)
ARTH*DOUTLET CONNECTION TYPE
A NARRATIVE DESCRIPTION OF THE TYPE OF OUTLET CONNECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARTH3DRNDBG*;ARTH3DRNDBG$DBH*;ARTH3DRNDBG$$DBH*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DRNSINGLE INLET
3HISFIRST OUTLET
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AB76)Reply
BFFLANGE
BGTHREADED
BHUNTHREADED
ARTJ*GOUTLET LOCATION
THE LOCATION OF THE OUTLET.
Enter the applicable ISAC from the table below, followed by the Mode Code and the clear text reply.
(ARTJ3HISGCLEARTEXT)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DRNSINGLE INLET
3HISFIRST OUTLET
3HOULOCATION NOT OTHERWISE SPECIFIED
ARTK*JOUTLET PROJECTION LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE OUTLET PROJECTION,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARTK3AEEJAA2.0*;ARTK3AEEJAA2.0$JAA2.0*;ARTK3AEEJAA2.0$$JAA2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DRNSINGLE INLET
3HISFIRST OUTLET
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ARTL*DOUTLET FLANGE SHAPE
THE PHYSICAL CONFIGURATION OF THE OUTLET FLANGE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARTL3DRNDHF*;ARTL3DRNDHF$DSQ*;ARTL3DRNDHF$$DSQ*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DRNSINGLE INLET
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AD07)Reply
BTOVAL
HFRECTANGLE
RDROUND
SQSQUARE
TRTRIANGULAR
ARTM*JOUTLET FLANGE MOUNTING PROVISION AND QUANTITY
INDICATES THE TYPE AND NUMBER OF OUTLET FLANGE MOUNTING PROVISIONS PROVIDED.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit.
(ARTM3AEEJGY2*;ARTM3AEEJGY2$$JGY3*;ARTM3AEEJGY2$JGY2*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DRNSINGLE INLET
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AB89)Reply
GYHOLES
GGSTUDS
ARTN*JOUTLET FLANGE MOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE PASSING THROUGH THE CENTER OF AN OUTLET FLANGE MOUNTING HOLE,AND TERMINATING AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARTNJAB2.0*;ARTNJAB2.0$JAB2.0*;ARTNJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ARTQ*AOUTLET FLANGE MOUNTING PROVISION THREAD SIZE
DESIGNATES THE THREAD DIAMETER AND NUMBER OF THREADS PER MEASUREMENT SCALE OF THE OUTLET FLANGE MOUNTING PROVISION.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(ARTQ1HAX5)
Table 1
ISAC Field Indicator (0362)Location
1ASINGLE INLET
1B1ST OUTLET
1C2ND OUTLET
1D3RD OUTLET
1E4TH OUTLET
1F5TH OUTLET
1G6TH OUTLET
1H7TH OUTLET
1J8TH OUTLET
ARTR*DOUTLET FLANGE MOUNTING PROVISION THREAD SERIES DESIGNATOR
A DESIGNATION INDICATING THE DIAMETER-PITCH AND THE NUMBER OF THREADS PER MEASUREMENT SCALE APPLIED TO A SERIES OF SPECIFIC DIAMETERS OF AN OUTLET FLANGE MOUNTING PROVISION.
Enter the applicable reply code from the table below
(ARTRDNF*;ARTRDNP$DNC*;ARTRDNP$$DNC*)
Table 1
Reply Code (AH06)Reply
NPNPT
NCUNC
NFUNF
ARTT*GOUTLET FLANGE MOUNTING PROVISION SPACING
A MEASUREMENT OF THE SPACING OF THE OUTLET FLANGE MOUNTING PROVISION.
Enter clear text.
(ARTTGCLEARTEXT)
ARTW*AOUTLET THREAD SIZE
DESIGNATES THE THREAD DIAMETER AND NUMBER OF THREADS PER MEASUREMENT SCALE OF THE OUTLET.
Enter the alpha-numeric reply with a minimum of one character.
(ARTWAH7)
ARTX*DOUTLET THREAD SERIES DESIGNATOR
A DESIGNATION INDICATING THE DIAMETER-PITCH AND THE NUMBER OF THREADS PER MEASUREMENT SCALE APPLIED TO A SERIES OF DIAMETERS OF AN OUTLET.
Enter the applicable reply code from the table below
(ARTXDNQ*;ARTXDSC$DNF*;ARTXDSC$$DNF*)
Table 1
Reply Code (AH06)Reply
NQNEF
SCNPSC
PMNPSM
NPNPT
NTNPTF
NCUNC
NFUNF
ARTY*DOUTLET THREAD DIRECTION
THE DIRECTION OF THE OUTLET THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable reply code from the table below
(ARTYDL*;ARTYDR$DL*;ARTYDR$$DL*)
Table 1
Reply Code (AA38)Reply
LLEFT-HAND
RRIGHT-HAND
ARTZ*DOUTLET THREAD LOCATION
INDICATES THE LOCATION OF THE THREAD ON THE OUTLET.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARTZ1DDABX)
Table 1
ISAC Field Indicator (0362)Location
1ASINGLE INLET
1B1ST OUTLET
1C2ND OUTLET
1D3RD OUTLET
1E4TH OUTLET
1F5TH OUTLET
1G6TH OUTLET
1H7TH OUTLET
1J8TH OUTLET
Table 2
Reply Code (AJ91)Reply
ABYEXTERNAL
ABXINTERNAL
ARWA*JOUTLET OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE OUTLET,WITH TERMINATED POINTS ON THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARWA3HISJAA2.0*;ARWA3HISJAA2.0$JAA2.0*;ARWA3HISJAA2.0$$JAA2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3HISFIRST OUTLET
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
AJLW*JOUTLET INSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE OUTLET,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJLW3DRNJAB2.0*;AJLW3DRNJAB2.0$JAB2.0*;AJLW3DRNJAB2.0$$JAB2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DRNSINGLE INLET
3HISFIRST OUTLET
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
Table 1
Reply Code (AC28)Reply
ASPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BSTANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
CDRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
Table 1
Reply Code (AN62)Reply
VFEDERAL MOTOR VEHICLE SAFETY STANDARD
FFLAMMABILITY STANDARD
SGOVERNMENT SPECIFICATION
TGOVERNMENT STANDARD
UINTERNATIONAL STD/SPEC
DMANUFACTURERS SOURCE CONTROL
RMANUFACTURERS SPECIFICATION
NMANUFACTURERS SPECIFICATION CONTROL
MMANUFACTURERS STANDARD
BNATIONAL STD/SPEC
APROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
PPROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
Table 1
Reply Code (AD08)Reply
ALALLOY
BEANNEALED
ANANNEX
APAPPENDIX
ACAPPLICABILITY CLASS
ARARRANGEMENT
ASASSEMBLY
ABASSORTMENT
BFBOND
BXBOX
CYCAPACITY
CACASE
CTCATEGORY
CFCIRCUMFERENCE
CLCLASS
CECODE
CRCOLOR
CCCOMBINATION CODE
CNCOMPONENT
CPCOMPOSITION
CMCOMPOUND
CDCONDITION
AVCONFIGURATION
CSCONSTRUCTION
BGCORE CONDITION
CBCUT OFF
AMDELAY CLASS
DEDESIGN
DGDESIGNATOR
DWDRAWING NUMBER
DUDUPLEX
EGEDGE
ENEND
FYFAMILY
FGFIGURE
AKFILE NUMBER
FNFINISH
FBFLAVOR
BHFLUX PERCENTAGE
FMFORM
FAFORMULA
AJGAGE STOCK NUMBER
GRGRADE
GAGRADUATION
AXGRANULES
AYGRIT
GBGROUND
GPGROUP
HAHEAVY DUTY
BAIMAGE COLOR
NSINSERT
TMITEM
KDKIND
KTKIT
LGLENGTH
LVLEVEL
LTLIMIT
MKMARK
AAMARKER
ADMASK APERTURE
MLMATERIAL
BBMAXIMUM DENSITY
TAMEDIUM TEMPER
MHMESH
MEMETHOD
BCMINIMUM DENSITY
MDMODEL
MTMOUNTING
AQNATURAL
AUNON-DELAY CLASS
NRNUMBER
BLOUTFIT NUMBER
PAPARAGRAPH
PTPART
PNPATTERN
PCPHYSICAL CONDITION
PSPIECE
PLPLAN
PRPOINT
PDPOLISHED
PBPRESSURE RATING
QAQUALITY
QBQUENCHED
RNRANGE
AERAPID
RTRATING
RFREFERENCE NUMBER
RAREGULAR DUTY
BJRMA FLUX
SJSALIENT CHARACTERISTICS
SCSCHEDULE
SBSECTION
SLSELECTION
BDSERIALIZED
SESERIES
SVSERVICE
SXSET
SASHADE
SHSHAPE
SGSHEET
SZSIZE
AGSLOW
TCSOFT TEMPER
SKSOURCE
PZSPECIES
SQSPECIFICATION SHEET
SDSPEED
AWSTANDARD
SRSTRAIGHT
STSTYLE
SSSUBCLASS
SFSUBFORM
SPSUBTYPE
BKSUPPORT
SNSURFACE CONDITION
SYSYMBOL
SMSYSTEM
TBTABLE
TNTANNAGE
TPTEMPER
TXTEXTURE
TKTHICKNESS
TTTREATMENT
TRTRIM
TYTYPE
YNUNIT
AZUNSERIALIZED
VAVARIETY
WTWEIGHT
WDWIDTH
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDG4)
Table 1
Reply Code (EN02)Reply
G4COMPREHENSIVE PROCUREMENT GUIDELINE - VEHICULAR PRODUCTS - REBUILT VEHICULAR PARTS
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
Table 1
Reply Code (AN58)Reply
AADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ANTN*GSPECIFIC USE
THE REQUIRED PURPOSE OR APPLICATION FOR WHICH THE ITEM IS DESIGNED.
Enter clear text.
(ANTNGCLEARTEXT)
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
Table 1
Reply Code (AN76)Reply
CFCUBIC FEET
CMCUBIC METERS
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
KZTS*DCOGNIZANT SERVICE
THE MILITARY SERVICE THAT INITIALLY PROCURED THE ITEM FROM THE CONTRACTOR.
Enter the applicable reply code from the table below
(KZTSDF)
Table 1
Reply Code (AP57)Reply
FUNITED STATES AIR FORCE
MUNITED STATES MARINE CORPS
NUNITED STATES NAVY
AUSA
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAL6)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAU7)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ012*;HZRDDHAZ285$$DHAZ052*)
Table 1
Reply Code (HZ00)Reply
HAZ012COPPER
HAZ092MAGNESIUM
HAZ277PHENOL
HAZ285PLASTIC
HAZ052ZINC
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)