One or more individually jacketed FIBER, OPTIC contained in a common covering or two or more FIBER, OPTIC molded together but separated from each other. It may also contain one or more insulated electrical conductors. It is intended for use in data transmission and communication, control, and indicating circuits. It refers to bulk quantities only. For items of definite length with polished ends, cleaved ends and/or the ends terminated with a fitting, see CABLE ASSEMBLY, FIBER OPTIC.
ISAC Reply 3AEE added to MRC CXCW.
ISAC Reply 3EJQ added to MRC CXCW.
ISAC Reply 3EJR added to MRC CXCW.
ISAC Reply 3EJT added to MRC CXCW.
ISAC Reply 3EKB added to MRC CXCW.
ISAC Reply 3EKC added to MRC CXCW.
ISAC Reply 3HOU added to MRC CXCW.
ISAC Reply 1A deleted from MRC CXCW.
ISAC Reply 1B deleted from MRC CXCW.
ISAC Reply 1C deleted from MRC CXCW.
ISAC Reply 1D deleted from MRC CXCW.
ISAC Reply 1E deleted from MRC CXCW.
ISAC Reply 1F deleted from MRC CXCW.
ISAC Reply 1G deleted from MRC CXCW.
ISAC Reply 1H deleted from MRC CXCW.
ISAC Reply 1J deleted from MRC CXCW.
ISAC Reply 1K deleted from MRC CXCW.
ISAC Reply 1X deleted from MRC CXCW.
ISAC Reply 1Z deleted from MRC CXCW.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3EZM added to MRC MATT.
ISAC Reply 3EZN added to MRC MATT.
ISAC Reply 3EZQ added to MRC MATT.
ISAC Reply 3FAE added to MRC MATT.
ISAC Reply 3FAG added to MRC MATT.
ISAC Reply 3FBM added to MRC MATT.
ISAC Reply 3FCB added to MRC MATT.
ISAC Reply 3FCC added to MRC MATT.
ISAC Reply 3FCD added to MRC MATT.
ISAC Reply 3FCE added to MRC MATT.
ISAC Reply 3FCT added to MRC MATT.
ISAC Reply 3FET added to MRC MATT.
ISAC Reply 3FEV added to MRC MATT.
ISAC Reply 3FFV added to MRC MATT.
ISAC Reply 3FGD added to MRC MATT.
ISAC Reply 3FGE added to MRC MATT.
ISAC Reply 3FGH added to MRC MATT.
ISAC Reply 3FGL added to MRC MATT.
ISAC Reply 3FGP added to MRC MATT.
ISAC Reply 3FGS added to MRC MATT.
ISAC Reply 3FHE added to MRC MATT.
ISAC Reply 3FHG added to MRC MATT.
ISAC Reply 3FHM added to MRC MATT.
ISAC Reply 3FHO added to MRC MATT.
ISAC Reply 3FIB added to MRC MATT.
ISAC Reply 3FIJ added to MRC MATT.
ISAC Reply 3FIK added to MRC MATT.
ISAC Reply 3FJT added to MRC MATT.
ISAC Reply 3FKI added to MRC MATT.
ISAC Reply 3FKK added to MRC MATT.
ISAC Reply 3FKL added to MRC MATT.
ISAC Reply 3FLO added to MRC MATT.
ISAC Reply 3FMV added to MRC MATT.
ISAC Reply 3FNC added to MRC MATT.
ISAC Reply 3FND added to MRC MATT.
ISAC Reply 3FNQ added to MRC MATT.
ISAC Reply 3FNT added to MRC MATT.
ISAC Reply 3FNZ added to MRC MATT.
ISAC Reply 3FOB added to MRC MATT.
ISAC Reply 3FOM added to MRC MATT.
ISAC Reply 3FQG added to MRC MATT.
ISAC Reply 3FQI added to MRC MATT.
ISAC Reply 3FSD added to MRC MATT.
ISAC Reply 3FSX added to MRC MATT.
ISAC Reply 3FSY added to MRC MATT.
ISAC Reply 3FTO added to MRC MATT.
ISAC Reply 3FYF added to MRC MATT.
ISAC Reply 3FYR added to MRC MATT.
ISAC Reply 3GAJ added to MRC MATT.
ISAC Reply 3GAS added to MRC MATT.
ISAC Reply 3GBH added to MRC MATT.
ISAC Reply 3GBZ added to MRC MATT.
ISAC Reply 3GCP added to MRC MATT.
ISAC Reply 3GDH added to MRC MATT.
ISAC Reply 3GEH added to MRC MATT.
ISAC Reply 3GEZ added to MRC MATT.
ISAC Reply 3GHB added to MRC MATT.
ISAC Reply 3GHC added to MRC MATT.
ISAC Reply 3GHN added to MRC MATT.
ISAC Reply 3GKY added to MRC MATT.
ISAC Reply 3GLU added to MRC MATT.
ISAC Reply 3GMC added to MRC MATT.
ISAC Reply 3GNQ added to MRC MATT.
ISAC Reply 3GPS added to MRC MATT.
ISAC Reply 3GQL added to MRC MATT.
ISAC Reply 3GRC added to MRC MATT.
ISAC Reply 3GSL added to MRC MATT.
ISAC Reply 3GWX added to MRC MATT.
ISAC Reply 3GWZ added to MRC MATT.
ISAC Reply 3GXF added to MRC MATT.
ISAC Reply 3GXI added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 1F deleted from MRC MATT.
ISAC Reply 1G deleted from MRC MATT.
ISAC Reply 1H deleted from MRC MATT.
ISAC Reply 1J deleted from MRC MATT.
ISAC Reply 1K deleted from MRC MATT.
ISAC Reply 1L deleted from MRC MATT.
ISAC Reply 1M deleted from MRC MATT.
ISAC Reply 1N deleted from MRC MATT.
ISAC Reply 1P deleted from MRC MATT.
ISAC Reply 1Q deleted from MRC MATT.
ISAC Reply 1R deleted from MRC MATT.
ISAC Reply 1S deleted from MRC MATT.
ISAC Reply 1T deleted from MRC MATT.
ISAC Reply 1U deleted from MRC MATT.
ISAC Reply 1V deleted from MRC MATT.
ISAC Reply 1W deleted from MRC MATT.
ISAC Reply 1X deleted from MRC MATT.
ISAC Reply 1Y deleted from MRC MATT.
ISAC Reply 1Z deleted from MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 1F deleted from MRC MATT.
ISAC Reply 1G deleted from MRC MATT.
ISAC Reply 1H deleted from MRC MATT.
ISAC Reply 1J deleted from MRC MATT.
ISAC Reply 1K deleted from MRC MATT.
ISAC Reply 1L deleted from MRC MATT.
ISAC Reply 1M deleted from MRC MATT.
ISAC Reply 1N deleted from MRC MATT.
ISAC Reply 1P deleted from MRC MATT.
ISAC Reply 1Q deleted from MRC MATT.
ISAC Reply 1R deleted from MRC MATT.
ISAC Reply 1S deleted from MRC MATT.
ISAC Reply 1T deleted from MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 1F deleted from MRC MATT.
ISAC Reply 1G deleted from MRC MATT.
ISAC Reply 1H deleted from MRC MATT.
ISAC Reply 1J deleted from MRC MATT.
ISAC Reply 1K deleted from MRC MATT.
ISAC Reply 1L deleted from MRC MATT.
ISAC Reply 1M deleted from MRC MATT.
ISAC Reply 1N deleted from MRC MATT.
ISAC Reply 1P deleted from MRC MATT.
ISAC Reply 1Q deleted from MRC MATT.
ISAC Reply 1R deleted from MRC MATT.
ISAC Reply 1S deleted from MRC MATT.
ISAC Reply 1T deleted from MRC MATT.
ISAC Reply 1U deleted from MRC MATT.
ISAC Reply 1V deleted from MRC MATT.
ISAC Reply 1W deleted from MRC MATT.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3EZM added to MRC MDCL.
ISAC Reply 3EZN added to MRC MDCL.
ISAC Reply 3EZQ added to MRC MDCL.
ISAC Reply 3FAE added to MRC MDCL.
ISAC Reply 3FAG added to MRC MDCL.
ISAC Reply 3FBM added to MRC MDCL.
ISAC Reply 3FCB added to MRC MDCL.
ISAC Reply 3FCC added to MRC MDCL.
ISAC Reply 3FCD added to MRC MDCL.
ISAC Reply 3FCE added to MRC MDCL.
ISAC Reply 3FCT added to MRC MDCL.
ISAC Reply 3FET added to MRC MDCL.
ISAC Reply 3FEV added to MRC MDCL.
ISAC Reply 3FFV added to MRC MDCL.
ISAC Reply 3FGD added to MRC MDCL.
ISAC Reply 3FGE added to MRC MDCL.
ISAC Reply 3FGH added to MRC MDCL.
ISAC Reply 3FGL added to MRC MDCL.
ISAC Reply 3FGP added to MRC MDCL.
ISAC Reply 3FGS added to MRC MDCL.
ISAC Reply 3FHE added to MRC MDCL.
ISAC Reply 3FHG added to MRC MDCL.
ISAC Reply 3FHM added to MRC MDCL.
ISAC Reply 3FHO added to MRC MDCL.
ISAC Reply 3FIB added to MRC MDCL.
ISAC Reply 3FIJ added to MRC MDCL.
ISAC Reply 3FIK added to MRC MDCL.
ISAC Reply 3FJT added to MRC MDCL.
ISAC Reply 3FKI added to MRC MDCL.
ISAC Reply 3FKK added to MRC MDCL.
ISAC Reply 3FKL added to MRC MDCL.
ISAC Reply 3FLO added to MRC MDCL.
ISAC Reply 3FMV added to MRC MDCL.
ISAC Reply 3FNC added to MRC MDCL.
ISAC Reply 3FND added to MRC MDCL.
ISAC Reply 3FNQ added to MRC MDCL.
ISAC Reply 3FNT added to MRC MDCL.
ISAC Reply 3FNZ added to MRC MDCL.
ISAC Reply 3FOB added to MRC MDCL.
ISAC Reply 3FOM added to MRC MDCL.
ISAC Reply 3FQG added to MRC MDCL.
ISAC Reply 3FQI added to MRC MDCL.
ISAC Reply 3FSD added to MRC MDCL.
ISAC Reply 3FSX added to MRC MDCL.
ISAC Reply 3FSY added to MRC MDCL.
ISAC Reply 3FTO added to MRC MDCL.
ISAC Reply 3FYF added to MRC MDCL.
ISAC Reply 3FYR added to MRC MDCL.
ISAC Reply 3GAJ added to MRC MDCL.
ISAC Reply 3GAS added to MRC MDCL.
ISAC Reply 3GBH added to MRC MDCL.
ISAC Reply 3GBZ added to MRC MDCL.
ISAC Reply 3GCP added to MRC MDCL.
ISAC Reply 3GDH added to MRC MDCL.
ISAC Reply 3GEH added to MRC MDCL.
ISAC Reply 3GEZ added to MRC MDCL.
ISAC Reply 3GHB added to MRC MDCL.
ISAC Reply 3GHC added to MRC MDCL.
ISAC Reply 3GHN added to MRC MDCL.
ISAC Reply 3GKY added to MRC MDCL.
ISAC Reply 3GLU added to MRC MDCL.
ISAC Reply 3GMC added to MRC MDCL.
ISAC Reply 3GNQ added to MRC MDCL.
ISAC Reply 3GPS added to MRC MDCL.
ISAC Reply 3GQL added to MRC MDCL.
ISAC Reply 3GRC added to MRC MDCL.
ISAC Reply 3GSL added to MRC MDCL.
ISAC Reply 3GWX added to MRC MDCL.
ISAC Reply 3GWZ added to MRC MDCL.
ISAC Reply 3GXF added to MRC MDCL.
ISAC Reply 3GXI added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 1A deleted from MRC MDCL.
ISAC Reply 1B deleted from MRC MDCL.
ISAC Reply 1C deleted from MRC MDCL.
ISAC Reply 1D deleted from MRC MDCL.
ISAC Reply 1E deleted from MRC MDCL.
ISAC Reply 1F deleted from MRC MDCL.
ISAC Reply 1G deleted from MRC MDCL.
ISAC Reply 1H deleted from MRC MDCL.
ISAC Reply 1J deleted from MRC MDCL.
ISAC Reply 1K deleted from MRC MDCL.
ISAC Reply 1L deleted from MRC MDCL.
ISAC Reply 1M deleted from MRC MDCL.
ISAC Reply 1N deleted from MRC MDCL.
ISAC Reply 1P deleted from MRC MDCL.
ISAC Reply 1Q deleted from MRC MDCL.
ISAC Reply 1R deleted from MRC MDCL.
ISAC Reply 1S deleted from MRC MDCL.
ISAC Reply 1T deleted from MRC MDCL.
ISAC Reply 1U deleted from MRC MDCL.
ISAC Reply 1V deleted from MRC MDCL.
ISAC Reply 1W deleted from MRC MDCL.
ISAC Reply 1X deleted from MRC MDCL.
ISAC Reply 1Y deleted from MRC MDCL.
ISAC Reply 1Z deleted from MRC MDCL.
ISAC Reply 1A deleted from MRC MDCL.
ISAC Reply 1B deleted from MRC MDCL.
ISAC Reply 1C deleted from MRC MDCL.
ISAC Reply 1D deleted from MRC MDCL.
ISAC Reply 1E deleted from MRC MDCL.
ISAC Reply 1F deleted from MRC MDCL.
ISAC Reply 1G deleted from MRC MDCL.
ISAC Reply 1H deleted from MRC MDCL.
ISAC Reply 1J deleted from MRC MDCL.
ISAC Reply 1K deleted from MRC MDCL.
ISAC Reply 1L deleted from MRC MDCL.
ISAC Reply 1M deleted from MRC MDCL.
ISAC Reply 1N deleted from MRC MDCL.
ISAC Reply 1P deleted from MRC MDCL.
ISAC Reply 1Q deleted from MRC MDCL.
ISAC Reply 1R deleted from MRC MDCL.
ISAC Reply 1S deleted from MRC MDCL.
ISAC Reply 1T deleted from MRC MDCL.
ISAC Reply 1A deleted from MRC MDCL.
ISAC Reply 1B deleted from MRC MDCL.
ISAC Reply 1C deleted from MRC MDCL.
ISAC Reply 1D deleted from MRC MDCL.
ISAC Reply 1E deleted from MRC MDCL.
ISAC Reply 1F deleted from MRC MDCL.
ISAC Reply 1G deleted from MRC MDCL.
ISAC Reply 1H deleted from MRC MDCL.
ISAC Reply 1J deleted from MRC MDCL.
ISAC Reply 1K deleted from MRC MDCL.
ISAC Reply 1L deleted from MRC MDCL.
ISAC Reply 1M deleted from MRC MDCL.
ISAC Reply 1N deleted from MRC MDCL.
ISAC Reply 1P deleted from MRC MDCL.
ISAC Reply 1Q deleted from MRC MDCL.
ISAC Reply 1R deleted from MRC MDCL.
ISAC Reply 1S deleted from MRC MDCL.
ISAC Reply 1T deleted from MRC MDCL.
ISAC Reply 1U deleted from MRC MDCL.
ISAC Reply 1V deleted from MRC MDCL.
ISAC Reply 1W deleted from MRC MDCL.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3EZM added to MRC SFTT.
ISAC Reply 3EZQ added to MRC SFTT.
ISAC Reply 3GEZ added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1C deleted from MRC SFTT.
ISAC Reply 1D deleted from MRC SFTT.
ISAC Reply 1E deleted from MRC SFTT.
ISAC Reply 1F deleted from MRC SFTT.
ISAC Reply 1G deleted from MRC SFTT.
ISAC Reply 1H deleted from MRC SFTT.
ISAC Reply 1J deleted from MRC SFTT.
ISAC Reply 1K deleted from MRC SFTT.
ISAC Reply 1L deleted from MRC SFTT.
ISAC Reply 1M deleted from MRC SFTT.
ISAC Reply 1N deleted from MRC SFTT.
ISAC Reply 1P deleted from MRC SFTT.
ISAC Reply 1Q deleted from MRC SFTT.
ISAC Reply 1R deleted from MRC SFTT.
ISAC Reply 1S deleted from MRC SFTT.
ISAC Reply 1T deleted from MRC SFTT.
ISAC Reply 1U deleted from MRC SFTT.
ISAC Reply 1V deleted from MRC SFTT.
ISAC Reply 1W deleted from MRC SFTT.
ISAC Reply 1X deleted from MRC SFTT.
ISAC Reply 1Y deleted from MRC SFTT.
ISAC Reply 1Z deleted from MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1C deleted from MRC SFTT.
ISAC Reply 1D deleted from MRC SFTT.
ISAC Reply 1E deleted from MRC SFTT.
ISAC Reply 1F deleted from MRC SFTT.
ISAC Reply 1G deleted from MRC SFTT.
ISAC Reply 1H deleted from MRC SFTT.
ISAC Reply 1J deleted from MRC SFTT.
ISAC Reply 1K deleted from MRC SFTT.
ISAC Reply 1L deleted from MRC SFTT.
ISAC Reply 1M deleted from MRC SFTT.
ISAC Reply 1N deleted from MRC SFTT.
ISAC Reply 1P deleted from MRC SFTT.
ISAC Reply 1Q deleted from MRC SFTT.
ISAC Reply 1R deleted from MRC SFTT.
ISAC Reply 1S deleted from MRC SFTT.
ISAC Reply 1T deleted from MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1C deleted from MRC SFTT.
ISAC Reply 1D deleted from MRC SFTT.
ISAC Reply 1E deleted from MRC SFTT.
ISAC Reply 1F deleted from MRC SFTT.
ISAC Reply 1G deleted from MRC SFTT.
ISAC Reply 1H deleted from MRC SFTT.
ISAC Reply 1J deleted from MRC SFTT.
ISAC Reply 1K deleted from MRC SFTT.
ISAC Reply 1L deleted from MRC SFTT.
ISAC Reply 1M deleted from MRC SFTT.
ISAC Reply 1N deleted from MRC SFTT.
ISAC Reply 1P deleted from MRC SFTT.
ISAC Reply 1Q deleted from MRC SFTT.
ISAC Reply 1R deleted from MRC SFTT.
ISAC Reply 1S deleted from MRC SFTT.
ISAC Reply 1T deleted from MRC SFTT.
ISAC Reply 1U deleted from MRC SFTT.
ISAC Reply 1V deleted from MRC SFTT.
ISAC Reply 1W deleted from MRC SFTT.
ISAC Reply 1A deleted from MRC STDC.
ISAC Reply 1B deleted from MRC STDC.
ISAC Reply 1C deleted from MRC STDC.
ISAC Reply 1D deleted from MRC STDC.
ISAC Reply 1E deleted from MRC STDC.
ISAC Reply 1F deleted from MRC STDC.
ISAC Reply 1G deleted from MRC STDC.
ISAC Reply 1H deleted from MRC STDC.
ISAC Reply 1J deleted from MRC STDC.
ISAC Reply 1K deleted from MRC STDC.
ISAC Reply 1L deleted from MRC STDC.
ISAC Reply 1M deleted from MRC STDC.
ISAC Reply 1N deleted from MRC STDC.
ISAC Reply 1P deleted from MRC STDC.
ISAC Reply 1Q deleted from MRC STDC.
ISAC Reply 1R deleted from MRC STDC.
ISAC Reply 1S deleted from MRC STDC.
ISAC Reply 1T deleted from MRC STDC.
ISAC Reply 1U deleted from MRC STDC.
ISAC Reply 1V deleted from MRC STDC.
ISAC Reply 1W deleted from MRC STDC.
ISAC Reply 1X deleted from MRC STDC.
ISAC Reply 1Y deleted from MRC STDC.
ISAC Reply 1Z deleted from MRC STDC.
ISAC Reply 1A deleted from MRC STDC.
ISAC Reply 1B deleted from MRC STDC.
ISAC Reply 1C deleted from MRC STDC.
ISAC Reply 1D deleted from MRC STDC.
ISAC Reply 1E deleted from MRC STDC.
ISAC Reply 1F deleted from MRC STDC.
ISAC Reply 1G deleted from MRC STDC.
ISAC Reply 1H deleted from MRC STDC.
ISAC Reply 1J deleted from MRC STDC.
ISAC Reply 1K deleted from MRC STDC.
ISAC Reply 1L deleted from MRC STDC.
ISAC Reply 1M deleted from MRC STDC.
ISAC Reply 1N deleted from MRC STDC.
ISAC Reply 1P deleted from MRC STDC.
ISAC Reply 1Q deleted from MRC STDC.
ISAC Reply 1R deleted from MRC STDC.
ISAC Reply 1S deleted from MRC STDC.
ISAC Reply 1T deleted from MRC STDC.
ISAC Reply 1A deleted from MRC STDC.
ISAC Reply 1B deleted from MRC STDC.
ISAC Reply 1C deleted from MRC STDC.
ISAC Reply 1D deleted from MRC STDC.
ISAC Reply 1E deleted from MRC STDC.
ISAC Reply 1F deleted from MRC STDC.
ISAC Reply 1G deleted from MRC STDC.
ISAC Reply 1H deleted from MRC STDC.
ISAC Reply 1J deleted from MRC STDC.
ISAC Reply 1K deleted from MRC STDC.
ISAC Reply 1L deleted from MRC STDC.
ISAC Reply 1M deleted from MRC STDC.
ISAC Reply 1N deleted from MRC STDC.
ISAC Reply 1P deleted from MRC STDC.
ISAC Reply 1Q deleted from MRC STDC.
ISAC Reply 1R deleted from MRC STDC.
ISAC Reply 1S deleted from MRC STDC.
ISAC Reply 1T deleted from MRC STDC.
ISAC Reply 1U deleted from MRC STDC.
ISAC Reply 1V deleted from MRC STDC.
ISAC Reply 1W deleted from MRC STDC.
ISAC Reply 3AEE added to MRC CXDC.
ISAC Reply 3EJS added to MRC CXDC.
ISAC Reply 3EKB added to MRC CXDC.
ISAC Reply 3EKC added to MRC CXDC.
ISAC Reply 3HOU added to MRC CXDC.
ISAC Reply 1A deleted from MRC CXDC.
ISAC Reply 1B deleted from MRC CXDC.
ISAC Reply 1C deleted from MRC CXDC.
ISAC Reply 1D deleted from MRC CXDC.
ISAC Reply 1E deleted from MRC CXDC.
ISAC Reply 1F deleted from MRC CXDC.
ISAC Reply 1G deleted from MRC CXDC.
ISAC Reply 1H deleted from MRC CXDC.
ISAC Reply 1J deleted from MRC CXDC.
ISAC Reply 1K deleted from MRC CXDC.
ISAC Reply 1X deleted from MRC CXDC.
ISAC Reply 1Z deleted from MRC CXDC.
ISAC Reply 3AEE added to MRC BLNZ.
ISAC Reply 3EJQ added to MRC BLNZ.
ISAC Reply 3EJX added to MRC BLNZ.
ISAC Reply 3EKB added to MRC BLNZ.
ISAC Reply 3EKC added to MRC BLNZ.
ISAC Reply 3HOU added to MRC BLNZ.
ISAC Reply 1A deleted from MRC BLNZ.
ISAC Reply 1B deleted from MRC BLNZ.
ISAC Reply 1C deleted from MRC BLNZ.
ISAC Reply 1D deleted from MRC BLNZ.
ISAC Reply 1E deleted from MRC BLNZ.
ISAC Reply 1F deleted from MRC BLNZ.
ISAC Reply 1G deleted from MRC BLNZ.
ISAC Reply 1H deleted from MRC BLNZ.
ISAC Reply 1J deleted from MRC BLNZ.
ISAC Reply 1K deleted from MRC BLNZ.
ISAC Reply 1X deleted from MRC BLNZ.
ISAC Reply 1Z deleted from MRC BLNZ.
ISAC Reply 3AEE added to MRC CXDG.
ISAC Reply 3EKC added to MRC CXDG.
ISAC Reply 3HOU added to MRC CXDG.
ISAC Reply 1A deleted from MRC CXDG.
ISAC Reply 1B deleted from MRC CXDG.
ISAC Reply 1C deleted from MRC CXDG.
ISAC Reply 1D deleted from MRC CXDG.
ISAC Reply 1E deleted from MRC CXDG.
ISAC Reply 1F deleted from MRC CXDG.
ISAC Reply 1G deleted from MRC CXDG.
ISAC Reply 1H deleted from MRC CXDG.
ISAC Reply 1J deleted from MRC CXDG.
ISAC Reply 1K deleted from MRC CXDG.
ISAC Reply 1X deleted from MRC CXDG.
ISAC Reply 1Z deleted from MRC CXDG.
ISAC Reply 3AEE added to MRC CXDM.
ISAC Reply 3EJQ added to MRC CXDM.
ISAC Reply 3EKB added to MRC CXDM.
ISAC Reply 3EKC added to MRC CXDM.
ISAC Reply 3HOU added to MRC CXDM.
ISAC Reply 1A deleted from MRC CXDM.
ISAC Reply 1B deleted from MRC CXDM.
ISAC Reply 1C deleted from MRC CXDM.
ISAC Reply 1D deleted from MRC CXDM.
ISAC Reply 1E deleted from MRC CXDM.
ISAC Reply 1F deleted from MRC CXDM.
ISAC Reply 1G deleted from MRC CXDM.
ISAC Reply 1H deleted from MRC CXDM.
ISAC Reply 1J deleted from MRC CXDM.
ISAC Reply 1K deleted from MRC CXDM.
ISAC Reply 1X deleted from MRC CXDM.
ISAC Reply 1Z deleted from MRC CXDM.
ISAC Reply 3AEE added to MRC ABKV.
ISAC Reply 3EJQ added to MRC ABKV.
ISAC Reply 3EJR added to MRC ABKV.
ISAC Reply 3EKA added to MRC ABKV.
ISAC Reply 3EKB added to MRC ABKV.
ISAC Reply 3EKC added to MRC ABKV.
ISAC Reply 3HOU added to MRC ABKV.
ISAC Reply 1A deleted from MRC ABKV.
ISAC Reply 1B deleted from MRC ABKV.
ISAC Reply 1C deleted from MRC ABKV.
ISAC Reply 1D deleted from MRC ABKV.
ISAC Reply 1E deleted from MRC ABKV.
ISAC Reply 1F deleted from MRC ABKV.
ISAC Reply 1G deleted from MRC ABKV.
ISAC Reply 1H deleted from MRC ABKV.
ISAC Reply 1J deleted from MRC ABKV.
ISAC Reply 1K deleted from MRC ABKV.
ISAC Reply 1X deleted from MRC ABKV.
ISAC Reply 1Z deleted from MRC ABKV.
ISAC Reply 3AEE added to MRC AARX.
ISAC Reply 3EJQ added to MRC AARX.
ISAC Reply 3EJR added to MRC AARX.
ISAC Reply 3EKB added to MRC AARX.
ISAC Reply 3EKC added to MRC AARX.
ISAC Reply 3HOU added to MRC AARX.
ISAC Reply 1A deleted from MRC AARX.
ISAC Reply 1B deleted from MRC AARX.
ISAC Reply 1C deleted from MRC AARX.
ISAC Reply 1D deleted from MRC AARX.
ISAC Reply 1E deleted from MRC AARX.
ISAC Reply 1F deleted from MRC AARX.
ISAC Reply 1G deleted from MRC AARX.
ISAC Reply 1H deleted from MRC AARX.
ISAC Reply 1J deleted from MRC AARX.
ISAC Reply 1K deleted from MRC AARX.
ISAC Reply 1X deleted from MRC AARX.
ISAC Reply 1Z deleted from MRC AARX.
ISAC Reply 3AEE added to MRC ABGL.
ISAC Reply 3EKB added to MRC ABGL.
ISAC Reply 3EKC added to MRC ABGL.
ISAC Reply 3HOU added to MRC ABGL.
ISAC Reply 1A deleted from MRC ABGL.
ISAC Reply 1B deleted from MRC ABGL.
ISAC Reply 1C deleted from MRC ABGL.
ISAC Reply 1D deleted from MRC ABGL.
ISAC Reply 1E deleted from MRC ABGL.
ISAC Reply 1F deleted from MRC ABGL.
ISAC Reply 1G deleted from MRC ABGL.
ISAC Reply 1H deleted from MRC ABGL.
ISAC Reply 1J deleted from MRC ABGL.
ISAC Reply 1K deleted from MRC ABGL.
ISAC Reply 1X deleted from MRC ABGL.
ISAC Reply 1Z deleted from MRC ABGL.
ISAC Reply 3AEE added to MRC CXDY.
ISAC Reply 3EGG added to MRC CXDY.
ISAC Reply 3HOU added to MRC CXDY.
ISAC Reply 1A deleted from MRC CXDY.
ISAC Reply 1B deleted from MRC CXDY.
ISAC Reply 1C deleted from MRC CXDY.
ISAC Reply 1D deleted from MRC CXDY.
ISAC Reply 1E deleted from MRC CXDY.
ISAC Reply 1Z deleted from MRC CXDY.
ISAC Reply 3AEE added to MRC CXFG.
ISAC Reply 3EDJ added to MRC CXFG.
ISAC Reply 3HOU added to MRC CXFG.
ISAC Reply 1A deleted from MRC CXFG.
ISAC Reply 1B deleted from MRC CXFG.
ISAC Reply 1C deleted from MRC CXFG.
ISAC Reply 1D deleted from MRC CXFG.
ISAC Reply 1E deleted from MRC CXFG.
ISAC Reply 1Z deleted from MRC CXFG.
ISAC Reply 3AEE added to MRC HUES.
ISAC Reply 3EHY added to MRC HUES.
ISAC Reply 3EIA added to MRC HUES.
ISAC Reply 3EIB added to MRC HUES.
ISAC Reply 3EIC added to MRC HUES.
ISAC Reply 3EID added to MRC HUES.
ISAC Reply 3EIF added to MRC HUES.
ISAC Reply 3EIG added to MRC HUES.
ISAC Reply 3EIH added to MRC HUES.
ISAC Reply 3EIJ added to MRC HUES.
ISAC Reply 3EIK added to MRC HUES.
ISAC Reply 3EIL added to MRC HUES.
ISAC Reply 3EIM added to MRC HUES.
ISAC Reply 3EIN added to MRC HUES.
ISAC Reply 3EIO added to MRC HUES.
ISAC Reply 3EIP added to MRC HUES.
ISAC Reply 3EIQ added to MRC HUES.
ISAC Reply 3EIR added to MRC HUES.
ISAC Reply 3EIS added to MRC HUES.
ISAC Reply 3EIT added to MRC HUES.
ISAC Reply 3EIU added to MRC HUES.
ISAC Reply 3EIV added to MRC HUES.
ISAC Reply 3EIW added to MRC HUES.
ISAC Reply 3EIX added to MRC HUES.
ISAC Reply 3EIY added to MRC HUES.
ISAC Reply 3EIZ added to MRC HUES.
ISAC Reply 3EJA added to MRC HUES.
ISAC Reply 3EJB added to MRC HUES.
ISAC Reply 3EJC added to MRC HUES.
ISAC Reply 3EJD added to MRC HUES.
ISAC Reply 3EJE added to MRC HUES.
ISAC Reply 3EJF added to MRC HUES.
ISAC Reply 3EJG added to MRC HUES.
ISAC Reply 3EJH added to MRC HUES.
ISAC Reply 3EJI added to MRC HUES.
ISAC Reply 3EJJ added to MRC HUES.
ISAC Reply 3EJK added to MRC HUES.
ISAC Reply 3EJL added to MRC HUES.
ISAC Reply 3EJM added to MRC HUES.
ISAC Reply 3EJN added to MRC HUES.
ISAC Reply 3EJO added to MRC HUES.
ISAC Reply 3EJP added to MRC HUES.
ISAC Reply 3HOU added to MRC HUES.
ISAC Reply 3IGP added to MRC HUES.
ISAC Reply 1A deleted from MRC HUES.
ISAC Reply 1B deleted from MRC HUES.
ISAC Reply 1C deleted from MRC HUES.
ISAC Reply 1D deleted from MRC HUES.
ISAC Reply 1E deleted from MRC HUES.
ISAC Reply 1F deleted from MRC HUES.
ISAC Reply 1G deleted from MRC HUES.
ISAC Reply 1H deleted from MRC HUES.
ISAC Reply 1J deleted from MRC HUES.
ISAC Reply 1K deleted from MRC HUES.
ISAC Reply 1L deleted from MRC HUES.
ISAC Reply 1M deleted from MRC HUES.
ISAC Reply 1N deleted from MRC HUES.
ISAC Reply 1P deleted from MRC HUES.
ISAC Reply 1Q deleted from MRC HUES.
ISAC Reply 1R deleted from MRC HUES.
ISAC Reply 1S deleted from MRC HUES.
ISAC Reply 1T deleted from MRC HUES.
ISAC Reply 1U deleted from MRC HUES.
ISAC Reply 1V deleted from MRC HUES.
ISAC Reply 1W deleted from MRC HUES.
ISAC Reply 1X deleted from MRC HUES.
ISAC Reply 1Y deleted from MRC HUES.
ISAC Reply 1Z deleted from MRC HUES.
ISAC Reply 1A deleted from MRC HUES.
ISAC Reply 1B deleted from MRC HUES.
ISAC Reply 1C deleted from MRC HUES.
ISAC Reply 1D deleted from MRC HUES.
ISAC Reply 1E deleted from MRC HUES.
ISAC Reply 1F deleted from MRC HUES.
ISAC Reply 1G deleted from MRC HUES.
ISAC Reply 1H deleted from MRC HUES.
ISAC Reply 1J deleted from MRC HUES.
ISAC Reply 1K deleted from MRC HUES.
ISAC Reply 1L deleted from MRC HUES.
ISAC Reply 1M deleted from MRC HUES.
ISAC Reply 1N deleted from MRC HUES.
ISAC Reply 1P deleted from MRC HUES.
ISAC Reply 1Q deleted from MRC HUES.
ISAC Reply 1R deleted from MRC HUES.
ISAC Reply 1S deleted from MRC HUES.
ISAC Reply 1T deleted from MRC HUES.
ISAC Reply 1A deleted from MRC HUES.
ISAC Reply 1B deleted from MRC HUES.
ISAC Reply 1C deleted from MRC HUES.
ISAC Reply 1D deleted from MRC HUES.
ISAC Reply 1E deleted from MRC HUES.
ISAC Reply 1F deleted from MRC HUES.
ISAC Reply 1G deleted from MRC HUES.
ISAC Reply 1H deleted from MRC HUES.
ISAC Reply 1J deleted from MRC HUES.
ISAC Reply 1K deleted from MRC HUES.
ISAC Reply 1L deleted from MRC HUES.
ISAC Reply 1M deleted from MRC HUES.
ISAC Reply 1N deleted from MRC HUES.
ISAC Reply 1P deleted from MRC HUES.
ISAC Reply 1Q deleted from MRC HUES.
ISAC Reply 1R deleted from MRC HUES.
ISAC Reply 1S deleted from MRC HUES.
ISAC Reply 1T deleted from MRC HUES.
ISAC Reply 1U deleted from MRC HUES.
ISAC Reply 1V deleted from MRC HUES.
ISAC Reply 1W deleted from MRC HUES.
ISAC Reply 3AEE added to MRC ASGF.
ISAC Reply 3EGH added to MRC ASGF.
ISAC Reply 3EGS added to MRC ASGF.
ISAC Reply 3HOU added to MRC ASGF.
ISAC Reply 1A deleted from MRC ASGF.
ISAC Reply 1B deleted from MRC ASGF.
ISAC Reply 1C deleted from MRC ASGF.
ISAC Reply 1X deleted from MRC ASGF.
ISAC Reply 1A deleted from MRC ASGF.
ISAC Reply 1B deleted from MRC ASGF.
ISAC Reply 1C deleted from MRC ASGF.
ISAC Reply 1D deleted from MRC ASGF.
ISAC Reply 1E deleted from MRC ASGF.
ISAC Reply 1F deleted from MRC ASGF.
ISAC Reply 1G deleted from MRC ASGF.
ISAC Reply 1H deleted from MRC ASGF.
ISAC Reply 1J deleted from MRC ASGF.
ISAC Reply 1K deleted from MRC ASGF.
ISAC Reply 1X deleted from MRC ASGF.
ISAC Reply 1Z deleted from MRC ASGF.
ISAC Reply 3AEE added to MRC CXFK.
ISAC Reply 3EKB added to MRC CXFK.
ISAC Reply 3HOU added to MRC CXFK.
ISAC Reply 1A deleted from MRC CXFK.
ISAC Reply 1B deleted from MRC CXFK.
ISAC Reply 1C deleted from MRC CXFK.
ISAC Reply 1D deleted from MRC CXFK.
ISAC Reply 1E deleted from MRC CXFK.
ISAC Reply 1F deleted from MRC CXFK.
ISAC Reply 1G deleted from MRC CXFK.
ISAC Reply 1H deleted from MRC CXFK.
ISAC Reply 1J deleted from MRC CXFK.
ISAC Reply 1K deleted from MRC CXFK.
ISAC Reply 1X deleted from MRC CXFK.
ISAC Reply 1Z deleted from MRC CXFK.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED32277*)
AMQNACONDUCTOR QUANTITY
THE NUMBER OF ELECTRICAL CONDUCTORS INCLUDED ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AMQNA10*)
AWTB*JACCESSORY WIRE TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF ACCESSORY WIRES FURNISHED WITH THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(AWTBJABM2*;AWTBJABM2$$JABM3*)
| Table 1 |
| Reply Code (AL37) | Reply |
| ABM | DRAIN |
| ABN | GROUND |
| ABP | MESSENGER |
| ABQ | REINFORCEMENT |
IF STYLE/REPLY CODE(s) AX WERE ENTERED FOR MRC CXCW, YOU MUST ANSWER MRC (CXDC and BLNZ and CXDG)
CXCWDCONDUCTOR FORM
THE FABRICATED FORM OF THE CONDUCTOR.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CXCW3EJRDAZ*;CXCW3EJRDAZ$DBB*;CXCW3EJRDAZ$$DBB*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EJQ | FIRST CONDUCTOR |
| 3EJR | SECOND CONDUCTOR |
| 3EJT | FOURTH CONDUCTOR |
| 3EKB | SINGLE CONDUCTOR |
| 3EKC | ALL CONDUCTORS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AF31) | Reply |
| BC | ACCORDIAN |
| BE | BRAID, FLAT |
| BF | BRAID, TUBULAR |
| BB | LITZ |
| BD | RIBBON |
| AY | SOLID |
| BA | SOLID, TUBULAR |
| AT | SPIRAL |
| AX | STRANDED |
| AZ | TINSEL |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3FCEDPCCT00*;MATT3FCEDPCCT00$DPCBJ00*;MATT3FCEDPCCT00$$DPCBJ00*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EZM | CORE CONDUCTOR ALL CONDUCTORS |
| 3EZN | CORE CONDUCTOR SINGLE CONDUCTOR |
| 3EZQ | CORE CONDUCTOR THIRD CONDUCTOR |
| 3FAE | CORE CONDUCTOR CABLE |
| 3FAG | CORE CONDUCTOR OVERALL |
| 3FBM | CORE JACKET ALL CONDUCTORS |
| 3FCB | CORE JACKET CABLE |
| 3FCC | CORE JACKET CORD |
| 3FCD | CORE JACKET OVERALL |
| 3FCE | CORE COATING ALL CONDUCTORS |
| 3FCT | CORE COATING CABLE |
| 3FET | CORE WRAP CABLE |
| 3FEV | CORE WRAP OVERALL |
| 3FFV | CORE BRAID NON-METALLIC ALL GROUPS |
| 3FGD | CORE SHEATH OVERALL |
| 3FGE | CORE ARMOR ALL CONDUCTORS |
| 3FGH | CORE ARMOR CABLE |
| 3FGL | CORE TUBE SINGLE CONDUCTOR |
| 3FGP | CORE TUBE CABLE |
| 3FGS | CORE COVER ALL CONDUCTORS |
| 3FHE | CORE COVER CABLE |
| 3FHG | CORE COVER OVERALL |
| 3FHM | CORE SLEEVE CABLE |
| 3FHO | CORE SLEEVE OVERALL |
| 3FIB | FIRST POSITION CONDUCTOR ALL GROUPS |
| 3FIJ | FIRST POSITION PRIMARY INSULATION ALL CONDUCTORS |
| 3FIK | FIRST POSITION PRIMARY INSULATION SINGLE CONDUCTOR |
| 3FJT | FIRST POSITION JACKET ALL CONDUCTORS |
| 3FKI | FIRST POSITION JACKET CORD |
| 3FKK | FIRST POSITION COATING ALL CONDUCTORS |
| 3FKL | FIRST POSITION COATING SINGLE CONDUCTOR |
| 3FLO | FIRST POSITION SHIELD BRAID METALLIC ALL CONDUCTORS |
| 3FMV | FIRST POSITION SHIELD FOIL ALL CONDUCTORS |
| 3FNC | FIRST POSITION SHIELD FOIL ALL GROUPS |
| 3FND | FIRST POSITION SHIELD FOIL FIRST GROUP |
| 3FNQ | FIRST POSITION SERVING SINGLE CONDUCTOR |
| 3FNT | FIRST POSITION SERVING THIRD CONDUCTOR |
| 3FNZ | FIRST POSITION SERVING CABLE |
| 3FOB | FIRST POSITION SERVING OVERALL |
| 3FOM | FIRST POSITION SHEATH ALL CONDUCTORS |
| 3FQG | FIRST POSITION COVER CABLE |
| 3FQI | FIRST POSITION COVER OVERALL |
| 3FSD | SECOND POSITION SECONDARY INSULATION ALL CONDUCTORS |
| 3FSX | SECOND POSITION JACKET ALL CONDUCTORS |
| 3FSY | SECOND POSITION JACKET SINGLE CONDUCTOR |
| 3FTO | SECOND POSITION JACKET CABLE |
| 3FYF | SECOND POSITION ARMOR ALL CONDUCTORS |
| 3FYR | SECOND POSITION COVER SINGLE CONDUCTOR |
| 3GAJ | THIRD POSITION SECONDARY INSULATION SECOND CONDUCTOR |
| 3GAS | THIRD POSITION JACKET ALL CONDUCTORS |
| 3GBH | THIRD POSITION JACKET CABLE |
| 3GBZ | THIRD POSITION SHIELD BRAID METALLIC ALL CONDUCTORS |
| 3GCP | THIRD POSITION TAPE ALL CONDUCTORS |
| 3GDH | THIRD POSITION WRAP CABLE |
| 3GEH | THIRD POSITION SHEATH ALL CONDUCTORS |
| 3GEZ | THIRD POSITION TUBE OVERALL |
| 3GHB | FOURTH POSITION JACKET ALL CONDUCTORS |
| 3GHC | FOURTH POSITION JACKET SINGLE CONDUCTOR |
| 3GHN | FOURTH POSITION JACKET CABLE |
| 3GKY | FOURTH POSITION SLEEVE ALL CONDUCTORS |
| 3GLU | FIFTH POSITION JACKET ALL CONDUCTORS |
| 3GMC | FIFTH POSITION JACKET CABLE |
| 3GNQ | FIFTH POSITION SERVING ALL CONDUCTORS |
| 3GPS | SIXTH POSITION JACKET ALL CONDUCTORS |
| 3GQL | SIXTH POSITION TAPE ALL CONDUCTORS |
| 3GRC | SIXTH POSITION SHEATH SINGLE CONDUCTOR |
| 3GSL | SEVENTH POSITION JACKET ALL CONDUCTORS |
| 3GWX | TENTH POSITION SEPARATOR ALL CONDUCTORS |
| 3GWZ | TENTH POSITION SEPARATOR FIRST CONDUCTOR |
| 3GXF | TENTH POSITION SEPARATOR ALL GROUPS |
| 3GXI | TENTH POSITION SEPARATOR THIRD GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ADA000 | ADHESIVE |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL1350 | ALUMINUM ALLOY 1350 |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL2117 | ALUMINUM ALLOY 2117 |
| AL5052 | ALUMINUM ALLOY 5052 |
| AL5056 | ALUMINUM ALLOY 5056 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL6201 | ALUMINUM ALLOY 6201 |
| AL6253 | ALUMINUM ALLOY 6253 |
| SBA000 | ANTIMONY |
| ASA000 | ASBESTOS |
| MSD000 | ASPHALT |
| CDA000 | CADMIUM |
| CAA000 | CALCIUM SILICATE |
| CNA000 | CARBON |
| CSA000 | CELLULOSE |
| CLD000 | CERAMIC |
| MSW000 | CHLORITE |
| CRA000 | CHROMIUM |
| CRB000 | CHROMIUM ALLOY |
| CLA000 | CLAY |
| MTAB00 | COLUMBIUM |
| MTD000 | CONSTANTAN |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0059 | COPPER ALLOY 101 |
| CU0249 | COPPER ALLOY 102 |
| CU0282 | COPPER ALLOY 103 |
| CU0286 | COPPER ALLOY 104 |
| CU0287 | COPPER ALLOY 105 |
| CU0288 | COPPER ALLOY 107 |
| CU0283 | COPPER ALLOY 108 |
| CU0063 | COPPER ALLOY 110 |
| CU0064 | COPPER ALLOY 111 |
| CU0289 | COPPER ALLOY 113 |
| CU0290 | COPPER ALLOY 114 |
| CU0321 | COPPER ALLOY 115 |
| CU0291 | COPPER ALLOY 116 |
| CU0247 | COPPER ALLOY 120 |
| CU0323 | COPPER ALLOY 121 |
| CU0248 | COPPER ALLOY 122 |
| CU0292 | COPPER ALLOY 123 |
| CU0278 | COPPER ALLOY 125 |
| CU0324 | COPPER ALLOY 127 |
| CU0326 | COPPER ALLOY 128 |
| CU0327 | COPPER ALLOY 129 |
| CU0315 | COPPER ALLOY 130 |
| CU0279 | COPPER ALLOY 142 |
| CU0284 | COPPER ALLOY 147 |
| CU0329 | COPPER ALLOY 150 |
| CU0285 | COPPER ALLOY 162 |
| CU0068 | COPPER ALLOY 170 |
| CU0069 | COPPER ALLOY 172 |
| CU0351 | COPPER ALLOY 194 |
| CU0074 | COPPER ALLOY 230 |
| CU0076 | COPPER ALLOY 240 |
| CU0079 | COPPER ALLOY 260 |
| CU0304 | COPPER ALLOY 262 |
| CU0080 | COPPER ALLOY 268 |
| CU0081 | COPPER ALLOY 270 |
| CU0272 | COPPER ALLOY 272 |
| CU0274 | COPPER ALLOY 274 |
| CU0302 | COPPER ALLOY 280 |
| CU0330 | COPPER ALLOY 330 |
| CU0305 | COPPER ALLOY 331 |
| CU0332 | COPPER ALLOY 332 |
| CU0335 | COPPER ALLOY 335 |
| CU0340 | COPPER ALLOY 340 |
| CU0088 | COPPER ALLOY 342 |
| CU0306 | COPPER ALLOY 344 |
| CU0307 | COPPER ALLOY 345 |
| CU0308 | COPPER ALLOY 347 |
| CU0309 | COPPER ALLOY 348 |
| CU0310 | COPPER ALLOY 350 |
| CU0089 | COPPER ALLOY 353 |
| CU0090 | COPPER ALLOY 356 |
| CU0091 | COPPER ALLOY 360 |
| CU0370 | COPPER ALLOY 370 |
| CU0435 | COPPER ALLOY 435 |
| CU0220 | COPPER ALLOY 955 |
| CU0222 | COPPER ALLOY 958 |
| CU1167 | COPPER ALLOY UNS C11010 |
| CU1168 | COPPER ALLOY UNS C11020 |
| CU1169 | COPPER ALLOY UNS C11030 |
| CCA000 | COTTON |
| FBS000 | FIBER SYNTHETIC |
| FBT000 | FLAX |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| MSB000 | GLYCERIN |
| GFA000 | GRAPHITE |
| FBL000 | HEMP |
| FEA000 | IRON |
| FEF000 | IRON ALLOY |
| FE0109 | IRON ALLOY UNS K94101 |
| FBK000 | JUTE |
| PBA000 | LEAD |
| PBB000 | LEAD ALLOY |
| PB0024 | LEAD ALLOY UNS L05023 |
| PB0025 | LEAD ALLOY UNS L05025 |
| PB0026 | LEAD ALLOY UNS L05050 |
| PB0048 | LEAD ALLOY UNS L05055 |
| PB0029 | LEAD ALLOY UNS L05201 |
| PB0034 | LEAD ALLOY UNS L05301 |
| PB0035 | LEAD ALLOY UNS L05302 |
| PB0037 | LEAD ALLOY UNS L05351 |
| PB0038 | LEAD ALLOY UNS L05352 |
| PB0041 | LEAD ALLOY UNS L05401 |
| PB0045 | LEAD ALLOY UNS L05501 |
| LRA000 | LEATHER |
| MGC000 | MAGNESIUM OXIDE |
| AYA000 | MICA |
| MBA000 | MOLYBDENUM |
| NLA000 | NICKEL |
| NL0089 | NICKEL ALL0Y UNS N06003 |
| NLB000 | NICKEL ALLOY |
| NL0043 | NICKEL ALLOY 205 |
| NL0090 | NICKEL ALLOY UNS N06004 |
| LBD000 | OIL |
| LBN000 | OIL SILICONE |
| XXF000 | OXIDE ALUMINUM |
| PPA000 | PAPER |
| MSE000 | PITCH COAL TAR |
| PCA000 | PLASTIC |
| PCB000 | PLASTIC ACETAL |
| PCD000 | PLASTIC ACRYLIC |
| PCAX00 | PLASTIC ACRYLONITRILE |
| PCBL00 | PLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) |
| PCDD00 | PLASTIC ALKANE-IMIDE |
| PCE000 | PLASTIC ALKYD |
| PCCX00 | PLASTIC ARAMID |
| PCDA00 | PLASTIC AROMATIC POLYIMIDE |
| PCCK00 | PLASTIC CELLULOSE |
| PCAN00 | PLASTIC CELLULOSE ACETATE |
| PCBN00 | PLASTIC CELLULOSE ACETATE BUTYRATE |
| PCBJ00 | PLASTIC CELLULOSE NITRATE |
| PCXL03 | PLASTIC CROSS LINKED POLYETHYLENE |
| PCXL07 | PLASTIC CROSS-LINKED ALKANE-IMIDE |
| PCXL02 | PLASTIC CROSS-LINKED ETHYLENE TETRAFLUOROETHYLENE |
| PCDN00 | PLASTIC CROSS-LINKED MODIFIED ETHYLENE TETRAFLUOROETHYLENE |
| PCXL06 | PLASTIC CROSS-LINKED POLYALKENE |
| PCXL04 | PLASTIC CROSS-LINKED POLYOLEFIN |
| PCXL05 | PLASTIC CROSS-LINKED POLYVINYL CHLORIDE |
| PCXL01 | PLASTIC CROSS-LINKED POLYVINYLIDENE FLUORIDE |
| PCG000 | PLASTIC DIALLYL PHTHALATE |
| PCAAK0 | PLASTIC DIALLYL PHTHALATE MINERAL FILLED |
| PCCL00 | PLASTIC ETHER POLYURETHANE |
| PCCN00 | PLASTIC ETHYLENE CHLOROTRIFLUOROETHYLENE |
| PCCS00 | PLASTIC ETHYLENE-TETRAFLUOROETHYLENE |
| PCAAC0 | PLASTIC FLUORINATED ETHYLENE |
| PCBR00 | PLASTIC FLUORINATED ETHYLENE PROPYLENE |
| PCAAD0 | PLASTIC FLUOROCARBON |
| PCCB00 | PLASTIC NYLON |
| PCCT00 | PLASTIC PERFLUOROALKOXY |
| PCN000 | PLASTIC PHENOLIC |
| PCBK00 | PLASTIC PHENOXY |
| PCCZ00 | PLASTIC POLYALKENE |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCDC00 | PLASTIC POLYARYLENE |
| PCCW00 | PLASTIC POLYBUTYLENE TEREPHTHALATE |
| PCQ000 | PLASTIC POLYCAPROLACTAM |
| PCT000 | PLASTIC POLYCHLOROTRIFLUOROETHYLENE |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| PCZ000 | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE |
| PCAM00 | PLASTIC POLYHEXAMETHYLENE AMIDE |
| PCCH00 | PLASTIC POLYIMIDE |
| PCAB00 | PLASTIC POLYOLEFIN |
| PCAAAA | PLASTIC POLYPHENYLENE OXIDE |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAD00 | PLASTIC POLYSTYRENE |
| PCAE00 | PLASTIC POLYSULFONE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAR00 | PLASTIC POLYTRIFLUOROETHYLENE |
| PCAAAB | PLASTIC POLYUNDECANOAMIDE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCCD00 | PLASTIC POLYVINYL |
| PCBM00 | PLASTIC POLYVINYL ACETATE |
| PCCF00 | PLASTIC POLYVINYL BUTYRATE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCCC00 | PLASTIC POLYVINYL CHLORIDE-ACETATE |
| PCBT00 | PLASTIC POLYVINYL FLUORIDE |
| PCBG00 | PLASTIC POLYVINYLIDENE CHLORIDE |
| PCAS00 | PLASTIC POLYVINYLIDENE FLUORIDE |
| PCAK00 | PLASTIC SILICONE |
| PCAAL0 | PLASTIC SILICONE MINERAL FILLED |
| PCAW00 | PLASTIC TETRAFLUOROETHYLENE |
| PCAL00 | PLASTIC UREA |
| PCBA00 | PLASTIC URETHANE |
| PCAP00 | PLASTIC VINYL |
| PCAAA0 | PLASTIC VINYL ACETATE |
| PCBX00 | PLASTIC VINYLIDENE FLUORIDE |
| PTA000 | PLATINUM |
| PMB000 | PULP WOOD |
| RSD000 | RESIN |
| RSC000 | RESIN NATURAL |
| RSB000 | RESIN SILICONE |
| RSA000 | RESIN SYNTHETIC |
| RHA000 | RHODIUM |
| RCE000 | RUBBER |
| RC0024 | RUBBER BUTADIENE CLASS BR |
| RC0019 | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| RC0022 | RUBBER BUTADIENE-STYRENE CLASS SBR |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RC0006 | RUBBER CHLOROSULFONATED POLYETHYLENE CLASS CSM |
| RC0009 | RUBBER ETHYLENE-PROPYLENE CLASS EPM |
| RC0010 | RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM |
| RC0013 | RUBBER FLUOROCARBON CLASS FPM |
| RC0017 | RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR |
| RCA000 | RUBBER NATURAL |
| RCAC00 | RUBBER NEOPRENE |
| RCY000 | RUBBER POLYCHLOROPRENE |
| RC0003 | RUBBER POLYESTER URETHANE CLASS AU |
| RC0020 | RUBBER POLYISOPRENE NATURAL CLASS NR |
| RC0012 | RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM |
| RCZ000 | RUBBER POLYURETHANE |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| MTH000 | SELENIUM |
| SLD000 | SILICA |
| SLC000 | SILICON |
| SLA000 | SILICON ALLOY |
| SLK000 | SILICONE |
| FBQ000 | SILK |
| AGA000 | SILVER |
| AGF000 | SILVER ALLOY |
| SLE000 | SOAPSTONE |
| STA000 | STEEL |
| ST1006 | STEEL COMP 1006 |
| ST1008 | STEEL COMP 1008 |
| ST1010 | STEEL COMP 1010 |
| ST1015 | STEEL COMP 1015 |
| ST1018 | STEEL COMP 1018 |
| ST1020 | STEEL COMP 1020 |
| ST1035 | STEEL COMP 1035 |
| ST1045 | STEEL COMP 1045 |
| ST0302 | STEEL COMP 302 |
| ST0304 | STEEL COMP 304 |
| ST0305 | STEEL COMP 305 |
| ST0310 | STEEL COMP 310 |
| ST0316 | STEEL COMP 316 |
| ST0321 | STEEL COMP 321 |
| ST0347 | STEEL COMP 347 |
| ST0410 | STEEL COMP 410 |
| ST0420 | STEEL COMP 420 |
| ST0430 | STEEL COMP 430 |
| STB000 | STEEL CORROSION RESISTING |
| STG000 | STEEL PLOW |
| MSH000 | TAR |
| SNB000 | TIN |
| SNA000 | TIN ALLOY |
| WXA000 | WAX |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EZM | CORE CONDUCTOR ALL CONDUCTORS |
| 3EZN | CORE CONDUCTOR SINGLE CONDUCTOR |
| 3EZQ | CORE CONDUCTOR THIRD CONDUCTOR |
| 3FAE | CORE CONDUCTOR CABLE |
| 3FAG | CORE CONDUCTOR OVERALL |
| 3FBM | CORE JACKET ALL CONDUCTORS |
| 3FCB | CORE JACKET CABLE |
| 3FCC | CORE JACKET CORD |
| 3FCD | CORE JACKET OVERALL |
| 3FCE | CORE COATING ALL CONDUCTORS |
| 3FCT | CORE COATING CABLE |
| 3FET | CORE WRAP CABLE |
| 3FEV | CORE WRAP OVERALL |
| 3FFV | CORE BRAID NON-METALLIC ALL GROUPS |
| 3FGD | CORE SHEATH OVERALL |
| 3FGE | CORE ARMOR ALL CONDUCTORS |
| 3FGH | CORE ARMOR CABLE |
| 3FGL | CORE TUBE SINGLE CONDUCTOR |
| 3FGP | CORE TUBE CABLE |
| 3FGS | CORE COVER ALL CONDUCTORS |
| 3FHE | CORE COVER CABLE |
| 3FHG | CORE COVER OVERALL |
| 3FHM | CORE SLEEVE CABLE |
| 3FHO | CORE SLEEVE OVERALL |
| 3FIB | FIRST POSITION CONDUCTOR ALL GROUPS |
| 3FIJ | FIRST POSITION PRIMARY INSULATION ALL CONDUCTORS |
| 3FIK | FIRST POSITION PRIMARY INSULATION SINGLE CONDUCTOR |
| 3FJT | FIRST POSITION JACKET ALL CONDUCTORS |
| 3FKI | FIRST POSITION JACKET CORD |
| 3FKK | FIRST POSITION COATING ALL CONDUCTORS |
| 3FKL | FIRST POSITION COATING SINGLE CONDUCTOR |
| 3FLO | FIRST POSITION SHIELD BRAID METALLIC ALL CONDUCTORS |
| 3FMV | FIRST POSITION SHIELD FOIL ALL CONDUCTORS |
| 3FNC | FIRST POSITION SHIELD FOIL ALL GROUPS |
| 3FND | FIRST POSITION SHIELD FOIL FIRST GROUP |
| 3FNQ | FIRST POSITION SERVING SINGLE CONDUCTOR |
| 3FNT | FIRST POSITION SERVING THIRD CONDUCTOR |
| 3FNZ | FIRST POSITION SERVING CABLE |
| 3FOB | FIRST POSITION SERVING OVERALL |
| 3FOM | FIRST POSITION SHEATH ALL CONDUCTORS |
| 3FQG | FIRST POSITION COVER CABLE |
| 3FQI | FIRST POSITION COVER OVERALL |
| 3FSD | SECOND POSITION SECONDARY INSULATION ALL CONDUCTORS |
| 3FSX | SECOND POSITION JACKET ALL CONDUCTORS |
| 3FSY | SECOND POSITION JACKET SINGLE CONDUCTOR |
| 3FTO | SECOND POSITION JACKET CABLE |
| 3FYF | SECOND POSITION ARMOR ALL CONDUCTORS |
| 3FYR | SECOND POSITION COVER SINGLE CONDUCTOR |
| 3GAJ | THIRD POSITION SECONDARY INSULATION SECOND CONDUCTOR |
| 3GAS | THIRD POSITION JACKET ALL CONDUCTORS |
| 3GBH | THIRD POSITION JACKET CABLE |
| 3GBZ | THIRD POSITION SHIELD BRAID METALLIC ALL CONDUCTORS |
| 3GCP | THIRD POSITION TAPE ALL CONDUCTORS |
| 3GDH | THIRD POSITION WRAP CABLE |
| 3GEH | THIRD POSITION SHEATH ALL CONDUCTORS |
| 3GEZ | THIRD POSITION TUBE OVERALL |
| 3GHB | FOURTH POSITION JACKET ALL CONDUCTORS |
| 3GHC | FOURTH POSITION JACKET SINGLE CONDUCTOR |
| 3GHN | FOURTH POSITION JACKET CABLE |
| 3GKY | FOURTH POSITION SLEEVE ALL CONDUCTORS |
| 3GLU | FIFTH POSITION JACKET ALL CONDUCTORS |
| 3GMC | FIFTH POSITION JACKET CABLE |
| 3GNQ | FIFTH POSITION SERVING ALL CONDUCTORS |
| 3GPS | SIXTH POSITION JACKET ALL CONDUCTORS |
| 3GQL | SIXTH POSITION TAPE ALL CONDUCTORS |
| 3GRC | SIXTH POSITION SHEATH SINGLE CONDUCTOR |
| 3GSL | SEVENTH POSITION JACKET ALL CONDUCTORS |
| 3GWX | TENTH POSITION SEPARATOR ALL CONDUCTORS |
| 3GWZ | TENTH POSITION SEPARATOR FIRST CONDUCTOR |
| 3GXF | TENTH POSITION SEPARATOR ALL GROUPS |
| 3GXI | TENTH POSITION SEPARATOR THIRD GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3GEZDPCAG00*;SFTT3GEZDPCAG00$DANA000*;SFTT3GEZDPCAG00$$DANA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EZM | CORE CONDUCTOR ALL CONDUCTORS |
| 3EZQ | CORE CONDUCTOR THIRD CONDUCTOR |
| 3GEZ | THIRD POSITION TUBE OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| ALB000 | ALUMINUM |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CMA000 | CHROMATE |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| DCA000 | DICHROMATE |
| ENA000 | ENAMEL |
| AUA000 | GOLD |
| LQA000 | LACQUER |
| LQJ000 | LACQUER CELLULOSE ACETATE |
| LQK000 | LACQUER FLUOROCARBON |
| PBA000 | LEAD |
| PBB000 | LEAD ALLOY |
| NLA000 | NICKEL |
| NLC000 | NICKEL ALLOY |
| XXB000 | OXIDE |
| PNA000 | PAINT |
| PNC000 | PAINT ALUMINUM |
| PCA000 | PLASTIC |
| PCAL00 | PLASTIC FLUORINATED ETHYLENE PROPYLENE |
| PCAH00 | PLASTIC POLYESTER |
| PCAC00 | PLASTIC POLYETHYLENE |
| PCAK00 | PLASTIC POLYFLUOROETHYLENEPROPYLENE |
| PCAM00 | PLASTIC POLYIMIDE |
| PCAG00 | PLASTIC POLYOLEFIN |
| PCB000 | PLASTIC POLYTETRAFLUOROETHYLENE |
| RC0020 | RUBBER POLYISOPRENE NATURAL CLASS NR |
| RC0021 | RUBBER SILICONE CLASS Q |
| AGA000 | SILVER |
| AGB000 | SILVER ALLOY |
| SNA000 | TIN |
| SNB000 | TIN ALLOY |
| SN0003 | TIN ALLOY UNS L13601 |
| SN0007 | TIN ALLOY UNS L13890 |
| VAA000 | VARNISH |
| VAF000 | VARNISH SILICONE |
| WXA000 | WAX |
| ZNA000 | ZINC |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
CXDC*JROUND CONDUCTOR SIZE
THE DESIGNATION USED TO DESCRIBE THE ROUND STRANDED OR ROUND SOLID CONDUCTOR SIZE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a alpha-numeric reply with a minimum of one character.
(CXDC3EKBJA2.0*;CXDC3EKBJA2.0$JA2.0*;CXDC3EKBJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EJS | THIRD CONDUCTOR |
| 3EKB | SINGLE CONDUCTOR |
| 3EKC | ALL CONDUCTORS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA44) | Reply |
| A | AWG |
| M | MCM |
| S | SQUARE MILLIMETERS |
BLNZ*ASTRAND QUANTITY PER CONDUCTOR
THE NUMBER OF STRANDS PER CONDUCTOR.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(BLNZ3EKCA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EJQ | FIRST CONDUCTOR |
| 3EJX | EIGHTH CONDUCTOR |
| 3EKB | SINGLE CONDUCTOR |
| 3EKC | ALL CONDUCTORS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CXDG*ASTRAND AWG SIZE PER CONDUCTOR
THE AMERICAN WIRE GAGE SIZE OF THE INDIVIDUAL STRANDS OF WIRE USED IN EACH STRANDED CONDUCTOR.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(CXDG3AEEA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EKC | ALL CONDUCTORS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
IF STYLE/REPLY CODE(s) ADS, ADW, AHZ OR AJA WERE ENTERED FOR MRC CXDM, YOU MUST ANSWER MRC (ABGL)
IF STYLE/REPLY CODE(s) ADR WERE ENTERED FOR MRC CXDM, YOU MUST ANSWER MRC (ABKV)
IF STYLE/REPLY CODE(s) ADT WERE ENTERED FOR MRC CXDM, YOU MUST ANSWER MRC (ABGL)
IF STYLE/REPLY CODE(s) ADX WERE ENTERED FOR MRC CXDM, YOU MUST ANSWER MRC (ABKV and AARX)
CXDM*DCONDUCTOR CROSS-SECTIONAL SHAPE
THE GEOMETRIC CONFIGURATION OF THE CONDUCTOR WHEN VIEWED IN CROSS-SECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CXDM3EKBDADT*;CXDM3EKBDADT$DAHZ*;CXDM3EKBDADT$$DAHZ*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EJQ | FIRST CONDUCTOR |
| 3EKB | SINGLE CONDUCTOR |
| 3EKC | ALL CONDUCTORS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AL59) | Reply |
| ADS | OVAL |
| ADW | RECTANGULAR |
| AJA | SECTOR 120 DEG |
| AHZ | SECTOR 90 DEG |
| ADT | SQUARE |
| ADR | TUBULAR BRAID |
| ADX | TUBULAR SOLID |
ABKV*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKV3EKAJAA2.0*;ABKV3EKAJAA2.0$JAA2.0*;ABKV3EKAJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EJQ | FIRST CONDUCTOR |
| 3EJR | SECOND CONDUCTOR |
| 3EKA | CONDUCTOR |
| 3EKB | SINGLE CONDUCTOR |
| 3EKC | ALL CONDUCTORS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AARX*JINSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AARX3AEEJAA2.0*;AARX3AEEJAA2.0$JAA2.0*;AARX3AEEJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EJQ | FIRST CONDUCTOR |
| 3EJR | SECOND CONDUCTOR |
| 3EKB | SINGLE CONDUCTOR |
| 3EKC | ALL CONDUCTORS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGL3EKCJAB2.0*;ABGL3EKCJAB2.0$JAB2.0*;ABGL3EKCJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EKB | SINGLE CONDUCTOR |
| 3EKC | ALL CONDUCTORS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CXDQ*JCONDUCTOR ARRANGEMENT AND QUANTITY
THE ARRANGEMENT AND NUMBER OF ARRANGEMENTS OF THE CONDUCTORS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CXDQJBW2*;CXDQJBW2$$JBW3*)
| Table 1 |
| Reply Code (AK80) | Reply |
| AR | COAXIAL |
| GM | FLAT PARALLEL |
| CC | MOLDED |
| CE | MOLDED TOGETHER W/NO OUTER COVERING |
| CG | MULTI-COAXIAL |
| CB | PARALLEL PAIR |
| BY | QUADS |
| BW | SINGLES |
| CA | TRIAXIAL |
| BX | TRIPLES |
| CH | TWIN-AXIAL PARALLEL |
| CJ | TWIN-AXIAL TWISTED |
| CF | TWIN-COAXIAL |
| BZ | TWISTED PAIR |
| ER | TWISTED PAIR/PARALLEL PAIR |
| EQ | TWISTED PAIR/TRIAXIAL |
| ES | TWISTED PAIR/TWIN-AXIAL PARALLEL |
| GN | TWISTED QUAD |
| FZ | TWISTED QUINT |
| CD | TWISTED TOGETHER W/NO OUTER COVERING |
| GA | TWISTED TRIPLES |
CXDT*AGROUP QUANTITY
THE NUMBER OF GROUPS INTO WHICH TWO OR MORE CONDUCTORS ARE ARRANGED.
Enter the numeric reply with a minimum of one digit.
(CXDTA10*)
CXDY*JCONDUCTOR GROUPING ARRANGEMENT TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF CONDUCTOR ARRANGEMENTS WITHIN GROUPS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit.
(CXDY3AEEJCA2*;CXDY3AEEJCA2$$JCA3*;CXDY3AEEJCA2$JCA2*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EGG | ALL GROUPS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AK80) | Reply |
| AR | COAXIAL |
| GM | FLAT PARALLEL |
| CC | MOLDED |
| CE | MOLDED TOGETHER W/NO OUTER COVERING |
| CG | MULTI-COAXIAL |
| CB | PARALLEL PAIR |
| BY | QUADS |
| BW | SINGLES |
| CA | TRIAXIAL |
| BX | TRIPLES |
| CH | TWIN-AXIAL PARALLEL |
| CJ | TWIN-AXIAL TWISTED |
| CF | TWIN-COAXIAL |
| BZ | TWISTED PAIR |
| ER | TWISTED PAIR/PARALLEL PAIR |
| EQ | TWISTED PAIR/TRIAXIAL |
| ES | TWISTED PAIR/TWIN-AXIAL PARALLEL |
| GN | TWISTED QUAD |
| FZ | TWISTED QUINT |
| CD | TWISTED TOGETHER W/NO OUTER COVERING |
| GA | TWISTED TRIPLES |
CXFG*DCONDUCTOR SEQUENCE WITHIN GROUPS
THE IDENTIFICATION OF THE CONDUCTORS WITHIN A GROUP.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CXFG3AEEDAPS*;CXFG3AEEDAPS$DAPY*;CXFG3AEEDAPS$$DAPY*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDJ | FIRST GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AJ91) | Reply |
| APL | ALL CONDUCTORS |
| APX | EIGHTH CONDUCTOR |
| APS | FIFTH CONDUCTOR |
| APN | FIRST CONDUCTOR |
| APR | FOURTH CONDUCTOR |
| APY | NINTH CONDUCTOR |
| APP | SECOND CONDUCTOR |
| APW | SEVENTH CONDUCTOR |
| APM | SINGLE CONDUCTOR |
| APT | SIXTH CONDUCTOR |
| APZ | TENTH CONDUCTOR |
| APQ | THIRD CONDUCTOR |
AWXS*JCOLOR CODING DOCUMENT
THE SPECIFICATION, STANDARD, DRAWING, OR SIMILAR INSTRUMENT THAT SPECIFIES THE INDIVIDUAL COLOR CODING UNDER WHICH THE ITEM IS IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER.INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(AWXSJC2.0*;AWXSJC2.0$$JC2.1*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(HUES3EJPDCR0000*;HUES3EJPDCR0000$DYE0049*;HUES3EJPDCR0000$$DYE0049*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EHY | CONDUCTOR ALL CONDUCTORS |
| 3EIA | CONDUCTOR FIRST CONDUCTOR |
| 3EIB | CONDUCTOR SECOND CONDUCTOR |
| 3EIC | CONDUCTOR ALL GROUPS |
| 3EID | CONDUCTOR CABLE |
| 3EIF | CONDUCTOR OVERALL |
| 3EIG | THIRD SHIELD FOIL ALL CONDUCTORS |
| 3EIH | ARMOR OVERALL |
| 3EIJ | FIRST SHIELD SOLID FIRST CONDUCTOR |
| 3EIK | FIRST SHIELD SOLID SECOND CONDUCTOR |
| 3EIL | COATING CABLE |
| 3EIM | COATING OVERALL |
| 3EIN | SINGLE JACKET ALL CONDUCTORS |
| 3EIO | SINGLE JACKET CABLE |
| 3EIP | SINGLE JACKET OVERALL |
| 3EIQ | SLEEVE CABLE |
| 3EIR | FIRST JACKET ALL CONDUCTORS |
| 3EIS | FIRST JACKET ALL GROUPS |
| 3EIT | FIRST JACKET CABLE |
| 3EIU | FIRST JACKET OVERALL |
| 3EIV | SECOND JACKET CABLE |
| 3EIW | PRIMARY INSULATION FIRST CONDUCTOR |
| 3EIX | PRIMARY INSULATION SECOND CONDUCTOR |
| 3EIY | PRIMARY INSULATION THIRD CONDUCTOR |
| 3EIZ | PRIMARY INSULATION FOURTH CONDUCTOR |
| 3EJA | PRIMARY INSULATION FIFTH CONDUCTOR |
| 3EJB | PRIMARY INSULATION SIXTH CONDUCTOR |
| 3EJC | PRIMARY INSULATION SEVENTH CONDUCTOR |
| 3EJD | PRIMARY INSULATION EIGHTH CONDUCTOR |
| 3EJE | PRIMARY INSULATION FIRST GROUP |
| 3EJF | PRIMARY INSULATION SECOND GROUP |
| 3EJG | PRIMARY INSULATION CABLE |
| 3EJH | THIRD TAPE CABLE |
| 3EJI | SERVING ALL CONDUCTOR |
| 3EJJ | TUBE OVERALL |
| 3EJK | SHEATH CABLE |
| 3EJL | SHEATH OVERALL |
| 3EJM | WRAP OVERALL |
| 3EJN | COVER ALL CONDUCTORS |
| 3EJO | COVER FIRST GROUP |
| 3EJP | COVER CABLE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3IGP | ARMOR CABLE |
| Table 2 |
| Reply Code (AD06) | Reply |
| BL0000 | BLACK |
| BL0052 | BLACK, GRAY |
| BU0000 | BLUE |
| BU0005 | BLUE, DARK |
| BU0026 | BLUE, LIGHT |
| BR0000 | BROWN |
| MS0073 | CHROME |
| CL0000 | CLEAR |
| CR0000 | CREAM |
| GL0000 | GOLD |
| GY0019 | GRAY, SILVER |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0011 | GREEN, OLIVE |
| MA0000 | MAROON |
| NA0000 | NATURAL |
| LD0000 | OLIVE DRAB |
| RG0000 | ORANGE |
| PK0000 | PINK |
| RE0000 | RED |
| TA0000 | TAN |
| VL0000 | VIOLET |
| VL0009 | VIOLET, LIGHT |
| WA0000 | WALNUT |
| WH0000 | WHITE |
| YE0000 | YELLOW |
| YE0049 | YELLOW-GREEN |
IF YOU ANSWER MRC HDCL, YOU MUST ANSWER MRC (HUES)
HDCL*JCOLOR DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,MANUFACTURERS REFERENCE,OR INDEX SYSTEM AND THE CLASIFICATION DESIGNATION, USED TO IDENTIFY COLOR, COLOR SELECTION, COLOR MATCHING AND QUALITY CONTROL OF A SPECIFIC COLOR.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(HDCLJEATEXT1234*;HDCLJEATEXT1234$$JEATEXT1234*;HDCLJEATEXT1234$JEATEXT1234*;HDCL1BJEATEXT1234*;HDCL1BJEATEXT1234$$JEATEXT1234*;HDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP93) | Reply |
| M | 10TH COLOR RESPONSE |
| N | 11TH COLOR RESPONSE |
| P | 12TH COLOR RESPONSE |
| Q | 13TH COLOR RESPONSE |
| R | 14TH COLOR RESPONSE |
| S | 15TH COLOR RESPONSE |
| T | 16TH COLOR RESPONSE |
| U | 17TH COLOR RESPONSE |
| W | 18TH COLOR RESPONSE |
| X | 19TH COLOR RESPONSE |
| B | 1ST COLOR RESPONSE |
| Y | 20TH COLOR RESPONSE |
| Z | 21ST COLOR RESPONSE |
| V | 22ND COLOR RESPONSE |
| C | 2ND COLOR RESPONSE |
| D | 3RD COLOR RESPONSE |
| E | 4TH COLOR RESPONSE |
| F | 5TH COLOR RESPONSE |
| H | 6TH COLOR RESPONSE |
| J | 7TH COLOR RESPONSE |
| K | 8TH COLOR RESPONSE |
| L | 9TH COLOR RESPONSE |
| G | ALL COLOR RESPONSE |
| A | SINGLE COLOR RESPONSE |
ASGF*DTRACER COLOR
THE HUE OR TINT OF THE TRACER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ASGF3EGSDVL0009*;ASGF3EGSDVL0009$DBR0000*;ASGF3EGSDVL0009$$DBR0000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EGH | FIRST TRACER FIRST CONDUCTOR |
| 3EGS | FIRST TRACER ALL CONDUCTOR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD06) | Reply |
| BL0000 | BLACK |
| BL0052 | BLACK, GRAY |
| BU0000 | BLUE |
| BU0005 | BLUE, DARK |
| BU0026 | BLUE, LIGHT |
| BR0000 | BROWN |
| MS0073 | CHROME |
| CL0000 | CLEAR |
| CR0000 | CREAM |
| GL0000 | GOLD |
| GY0019 | GRAY, SILVER |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0011 | GREEN, OLIVE |
| MA0000 | MAROON |
| NA0000 | NATURAL |
| LD0000 | OLIVE DRAB |
| RG0000 | ORANGE |
| PK0000 | PINK |
| RE0000 | RED |
| TA0000 | TAN |
| VL0000 | VIOLET |
| VL0009 | VIOLET, LIGHT |
| WA0000 | WALNUT |
| WH0000 | WHITE |
| YE0000 | YELLOW |
| YE0049 | YELLOW-GREEN |
AJSUABUFFER SIZE IN MICRONS/MICROMETERS
THE BUFFER SIZE EXPRESSED IN MICRONS/MICROMETERS.
Enter the numeric reply with a minimum of one digit.
(AJSUA10*)
AJTUDOPTICAL FIBER TYPE
THE TYPE OF OPTICAL FIBER IN THE CONDUCTOR.
Enter the applicable reply code from the table below
(AJTUDAAG)
| Table 1 |
| Reply Code (AK75) | Reply |
| AAF | MULTIMODE |
| AAG | SINGLE-MODE |
AJUAAWAVELENGTH IN NANOMETERS
THE WAVELENGTH MEASURED IN NANOMETERS.
Enter the numeric reply with a minimum of one digit.
(AJUAA10*)
BHTHBATTENUATION IN DECIBELS
THE DECREASE IN STRENGTH OF AN ELECTRICAL IMPULSE,EXPRESSED IN DECIBELS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(BHTHB2.0)
APQLJFREQUENCY BANDWIDTH
THE DIFFERENCES BETWEEN LIMITING FREQUENCIES OF A FREQUENCY BAND.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(APQLJMC2.0*;APQLJMC2.0$$JMC2.1*)
| Table 1 |
| Reply Code (AC32) | Reply |
| G | GIGAHERTZ |
| E | HERTZ |
| K | KILOHERTZ |
| M | MEGAHERTZ |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CXFK*JVOLTAGE RATING
THE MAXIMUM SUSTAINED VOLTAGE THAT CAN BE SAFELY APPLIED TO THE ITEM WITHOUT RISKING FAILURE OR DAMAGE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CXFK3EKBJAT2.0*;CXFK3EKBJAT2.0$JAT2.0*;CXFK3EKBJAT2.0$$JAT2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EKB | SINGLE CONDUCTOR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH16) | Reply |
| AX | AC MAXIMUM RATED WORKING VOLTAGE |
| AY | DC MAXIMUM RATED WORKING VOLTAGE |
| AZ | DIELECTRIC TEST VOLTAGE |
| AW | MAXIMUM PEAK OPERATING VOLTAGE |
| AT | MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE |
| BA | SERVICE VOLTAGE |
AAGRLCROSS-SECTIONAL SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE CROSS-SECTIONAL SHAPE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAGRL2)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAR1763 | 1 | COIL/CORD |
| AAR1772 | 10 | SQUARE |
| AAR1773 | 11 | RECTANGULAR |
| AAR1764 | 2 | TWIST |
| AAR1765 | 3 | FLAT |
| AAR1766 | 4 | OVAL |
| AAR1767 | 5 | FIGURE 8 |
| AAR1768 | 6 | ROUND |
| AAR1769 | 7 | DUMBBELL |
| AAR1770 | 8 | FLAT W/POLARITY |
| AAR1771 | 9 | OVAL W/POLARITY |
ADVL*JCROSS SECTION OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CROSS SECTION,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADVLJAC2.0*;ADVLJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADVN*JCROSS-SECTIONAL HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF A CROSS SECTION,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADVNJAA2.0*;ADVNJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADWH*JCROSS-SECTIONAL WIDTH
A MEASUREMENT OF THE CROSS SECTION TAKEN AT RIGHT ANGLES TO THE LENGTH,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADWHJAB2.0*;ADWHJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABJH*JTEMP RATING
A VALUE WHICH EXPRESSES THE DEGREE OF HEAT OR COLD AS APPLIED TO THE OPERATION,OR LIMITATION OF OPERATION,OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit as in the first and second examples.For negative temperature values, precede the numeric portion of the reply with the letter “M” as in the third and fourth examples.If ISAC coding is authorized for this requirement and one or more of the temperature values in negative, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.Also precede the numeric portion of the reply with the letter “M” as in the fifth and sixth examples.
(ABJHJF68.0*; ABJHJC0.0$$JC35.0*; ABJHJFCM15.0*; ABJHJFM40.0$$JF75.0*; ABJH1BJFM25.0*; ABJH1BJCM35.0$$JCM5.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
ABFF*DFURNISHED ITEMS
ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.
Enter the applicable reply code from the table below
(ABFFDAXQ*;ABFFDAMX$$DBAT*)
| Table 1 |
| Reply Code (AB28) | Reply |
| ABR | BOLT |
| AXQ | CONNECTOR |
| ARF | ELECTRICAL CONNECTOR COVER |
| BAM | REEL |
| AMX | SCREW |
| BAT | SPOOL |
MARK*GSPECIAL MARKINGS
MARKINGS INCLUDED ON AN ITEM FOR THE PURPOSE OF OFFERING INSTRUCTIONS OR WARNINGS OR TO INDICATE THE PURPOSE, FUNCTION, OR APPLICATION OF THE ITEM. EXCLUDES MANUFACTURER'S PART NUMBERS, SYMBOLS, OR THE LIKE.
Enter clear text.
(MARKGCLEARTEXT)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDFNY)
| Table 1 |
| Reply Code (AN47) | Reply |
| FNY | ROHS DIRECTIVE COMPLIANCE |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ALBY*DUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter the applicable reply code from the table below
(ALBYDAYX)
| Table 1 |
| Reply Code (AH21) | Reply |
| BHC | ADAPTER |
| BHD | AERIAL DISTRIBUTION |
| BHE | ALTERNATING CURRENT CONVERTER |
| BHF | ANNUNCIATOR |
| BHG | ATTENUATOR |
| BHH | AUDIO |
| BHJ | AUTOMOTIVE |
| AGB | BATTERY |
| BHK | BUILDING |
| BHL | CAMERA |
| BHM | CARRIER |
| BHN | COMMUNICATION |
| BHP | CONTROL |
| AFK | CROSS-CONNECTING WIRE |
| BHQ | DIESEL ELECTRIC LOCOMOTIVE |
| BHR | DIRECT BURIAL |
| BHS | DROP |
| BHT | ELECTRONIC |
| BGR | ELEVATOR |
| BHU | EXTENSION |
| ABK | FIELD |
| AJX | FIRING EXPLOSIVE CHARGES |
| AYX | HEATER |
| BHV | HEATING |
| AFN | HOOK-UP WIRE |
| AFP | IGNITION CABLE |
| BHW | MATRIX ASSEMBLY INTERFACE |
| BHX | MICROPHONE |
| BHY | MINE |
| BHZ | MISSILE |
| AGS | MOTOR |
| AFS | OUTSIDE CABLE |
| BJA | POWER |
| BJB | SERVICE ENTRANCE |
| ABC | SHIPBOARD |
| AFX | SWITCHBOARD WIRE |
| AFY | TEST LEADS |
| BJC | THERMOCOUPLE |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDRTA000*;PRMTDRHA000$DAUA000*;PRMTDRHA000$$DAUA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJAZA000F2.0*;PMWTJAZA000F2.0$JAZA000F2.0*;PMWTJAZA000F2.0$$JAZA000F2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
| A | TROY OUNCES PER THOUSAND FEET |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJIRA0002.0*;PMLCJIRA0002.0$JIRA0002.0*;PMLCJIRA0002.0$$JIRA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable reply code from the table below
(ADZCDAGG*;ADZCDABK$$DAAN*)
| Table 1 |
| Reply Code (AA65) | Reply |
| ABX | ABRASION RESISTANT |
| AEQ | AGE RESISTANT |
| AAB | CHEMICAL RESISTANT |
| AGB | CORONA RESISTANT |
| AAC | CORROSION RESISTANT |
| AAJ | FIRE RESISTANT |
| AGC | FIRE RETARDANT |
| AAN | FUNGUS RESISTANT |
| AAS | GASOLINE RESISTANT |
| AGD | HEAT DRY |
| AAP | HEAT RESISTANT |
| AGE | HIGH TEMPERATURE |
| AGF | LOW TEMPERATURE |
| ACC | MILDEW RESISTANT |
| AAW | MOISTURE RESISTANT |
| AAX | OIL RESISTANT |
| ACN | OZONE RESISTANT |
| AGG | RODENT RESISTANT |
| AGH | SALT AIR RESISTANT |
| ADL | SALT SPRAY PROOF |
| AGJ | SALT WATER PROOF |
| ABF | SOLVENT RESISTANT |
| ABW | SUBMERSIBLE |
| ABK | WATERPROOF |
| ABM | WEATHERPROOF |
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
HGTH*JHEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN OBJECT,IN DISTINCTION FROM DEPTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(HGTH3AEEJAB2.0*;HGTH3AEEJAB2.0$JAB2.0*;HGTH3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EKC | ALL CONDUCTORS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information