A manually pushed or towed unit designed to provide electric power for starting aircraft or vehicle engines. It is wheel mounted and may have handles for portability. It has one or more batteries and may or may not include a battery charger. If the battery charger is included, it may be used either to charge the batteries in the unit or in the aircraft/vehicle. Excludes:STARTER,ENGINE,ELECTRICAL; and STARTER,ENGINE,GASOLINE.
ISAC Reply 3AEE added to MRC APPA.
ISAC Reply 3DSK added to MRC APPA.
ISAC Reply 3DSL added to MRC APPA.
ISAC Reply 3DSM added to MRC APPA.
ISAC Reply 3DSN added to MRC APPA.
ISAC Reply 3HOU added to MRC APPA.
ISAC Reply 1A deleted from MRC APPA.
ISAC Reply 1B deleted from MRC APPA.
ISAC Reply 1C deleted from MRC APPA.
ISAC Reply 1D deleted from MRC APPA.
ISAC Reply 1E deleted from MRC APPA.
ISAC Reply 1F deleted from MRC APPA.
ISAC Reply 1G deleted from MRC APPA.
ISAC Reply 1H deleted from MRC APPA.
ISAC Reply 1J deleted from MRC APPA.
ISAC Reply 1K deleted from MRC APPA.
ISAC Reply 1L deleted from MRC APPA.
ISAC Reply 1M deleted from MRC APPA.
ISAC Reply 3AEE added to MRC CWGH.
ISAC Reply 3DSK added to MRC CWGH.
ISAC Reply 3DSM added to MRC CWGH.
ISAC Reply 3DSN added to MRC CWGH.
ISAC Reply 3HOU added to MRC CWGH.
ISAC Reply 1A deleted from MRC CWGH.
ISAC Reply 1B deleted from MRC CWGH.
ISAC Reply 1C deleted from MRC CWGH.
ISAC Reply 1D deleted from MRC CWGH.
ISAC Reply 1E deleted from MRC CWGH.
ISAC Reply 1F deleted from MRC CWGH.
ISAC Reply 1G deleted from MRC CWGH.
ISAC Reply 1H deleted from MRC CWGH.
ISAC Reply 1J deleted from MRC CWGH.
ISAC Reply 1K deleted from MRC CWGH.
ISAC Reply 1L deleted from MRC CWGH.
ISAC Reply 1M deleted from MRC CWGH.
ISAC Reply 3AEE added to MRC CWGN.
ISAC Reply 3DSK added to MRC CWGN.
ISAC Reply 3HOU added to MRC CWGN.
ISAC Reply 1A deleted from MRC CWGN.
ISAC Reply 1B deleted from MRC CWGN.
ISAC Reply 1C deleted from MRC CWGN.
ISAC Reply 1D deleted from MRC CWGN.
ISAC Reply 1E deleted from MRC CWGN.
ISAC Reply 1F deleted from MRC CWGN.
ISAC Reply 1G deleted from MRC CWGN.
ISAC Reply 1H deleted from MRC CWGN.
ISAC Reply 1J deleted from MRC CWGN.
ISAC Reply 1K deleted from MRC CWGN.
ISAC Reply 1L deleted from MRC CWGN.
ISAC Reply 1M deleted from MRC CWGN.
ISAC Reply 3AEE added to MRC BGQR.
ISAC Reply 3DSK added to MRC BGQR.
ISAC Reply 3DSL added to MRC BGQR.
ISAC Reply 3DSM added to MRC BGQR.
ISAC Reply 3DSN added to MRC BGQR.
ISAC Reply 3HOU added to MRC BGQR.
ISAC Reply 1A deleted from MRC BGQR.
ISAC Reply 1B deleted from MRC BGQR.
ISAC Reply 1C deleted from MRC BGQR.
ISAC Reply 1D deleted from MRC BGQR.
ISAC Reply 1E deleted from MRC BGQR.
ISAC Reply 1F deleted from MRC BGQR.
ISAC Reply 1G deleted from MRC BGQR.
ISAC Reply 1H deleted from MRC BGQR.
ISAC Reply 1J deleted from MRC BGQR.
ISAC Reply 1K deleted from MRC BGQR.
ISAC Reply 1L deleted from MRC BGQR.
ISAC Reply 1M deleted from MRC BGQR.
ISAC Reply 3AEE added to MRC BGHY.
ISAC Reply 3DSK added to MRC BGHY.
ISAC Reply 3HOU added to MRC BGHY.
ISAC Reply 1A deleted from MRC BGHY.
ISAC Reply 1B deleted from MRC BGHY.
ISAC Reply 1C deleted from MRC BGHY.
ISAC Reply 1D deleted from MRC BGHY.
ISAC Reply 1E deleted from MRC BGHY.
ISAC Reply 1F deleted from MRC BGHY.
ISAC Reply 1G deleted from MRC BGHY.
ISAC Reply 1H deleted from MRC BGHY.
ISAC Reply 1J deleted from MRC BGHY.
ISAC Reply 1K deleted from MRC BGHY.
ISAC Reply 1L deleted from MRC BGHY.
ISAC Reply 1M deleted from MRC BGHY.
ISAC Reply 1A deleted from MRC BGHX.
ISAC Reply 1B deleted from MRC BGHX.
ISAC Reply 1C deleted from MRC BGHX.
ISAC Reply 1D deleted from MRC BGHX.
ISAC Reply 1E deleted from MRC BGHX.
ISAC Reply 1F deleted from MRC BGHX.
ISAC Reply 1G deleted from MRC BGHX.
ISAC Reply 1H deleted from MRC BGHX.
ISAC Reply 1J deleted from MRC BGHX.
ISAC Reply 1K deleted from MRC BGHX.
ISAC Reply 1L deleted from MRC BGHX.
ISAC Reply 1M deleted from MRC BGHX.
ISAC Reply 3AEE added to MRC CWHF.
ISAC Reply 3DSK added to MRC CWHF.
ISAC Reply 3DSM added to MRC CWHF.
ISAC Reply 3DSN added to MRC CWHF.
ISAC Reply 3HOU added to MRC CWHF.
ISAC Reply 1A deleted from MRC CWHF.
ISAC Reply 1B deleted from MRC CWHF.
ISAC Reply 1C deleted from MRC CWHF.
ISAC Reply 1D deleted from MRC CWHF.
ISAC Reply 1E deleted from MRC CWHF.
ISAC Reply 1F deleted from MRC CWHF.
ISAC Reply 1G deleted from MRC CWHF.
ISAC Reply 1H deleted from MRC CWHF.
ISAC Reply 1J deleted from MRC CWHF.
ISAC Reply 1K deleted from MRC CWHF.
ISAC Reply 1L deleted from MRC CWHF.
ISAC Reply 1M deleted from MRC CWHF.
ISAC Reply 3AEE added to MRC CWHJ.
ISAC Reply 3DSK added to MRC CWHJ.
ISAC Reply 3DSM added to MRC CWHJ.
ISAC Reply 3DSN added to MRC CWHJ.
ISAC Reply 3DSO added to MRC CWHJ.
ISAC Reply 3HOU added to MRC CWHJ.
ISAC Reply 1A deleted from MRC CWHJ.
ISAC Reply 1B deleted from MRC CWHJ.
ISAC Reply 1C deleted from MRC CWHJ.
ISAC Reply 1D deleted from MRC CWHJ.
ISAC Reply 1E deleted from MRC CWHJ.
ISAC Reply 1F deleted from MRC CWHJ.
ISAC Reply 1G deleted from MRC CWHJ.
ISAC Reply 1H deleted from MRC CWHJ.
ISAC Reply 1J deleted from MRC CWHJ.
ISAC Reply 1K deleted from MRC CWHJ.
ISAC Reply 1L deleted from MRC CWHJ.
ISAC Reply 1M deleted from MRC CWHJ.
ISAC Reply 3AEE added to MRC ASCX.
ISAC Reply 3DSK added to MRC ASCX.
ISAC Reply 3HOU added to MRC ASCX.
ISAC Reply 1A deleted from MRC ASCX.
ISAC Reply 1B deleted from MRC ASCX.
ISAC Reply 1C deleted from MRC ASCX.
ISAC Reply 1D deleted from MRC ASCX.
ISAC Reply 1E deleted from MRC ASCX.
ISAC Reply 1F deleted from MRC ASCX.
ISAC Reply 1G deleted from MRC ASCX.
ISAC Reply 1H deleted from MRC ASCX.
ISAC Reply 1J deleted from MRC ASCX.
ISAC Reply 1K deleted from MRC ASCX.
ISAC Reply 1L deleted from MRC ASCX.
ISAC Reply 1M deleted from MRC ASCX.
ISAC Reply 3AEE added to MRC AWNP.
ISAC Reply 3DSL added to MRC AWNP.
ISAC Reply 3HOU added to MRC AWNP.
ISAC Reply 1A deleted from MRC AWNP.
ISAC Reply 1B deleted from MRC AWNP.
ISAC Reply 1C deleted from MRC AWNP.
ISAC Reply 1D deleted from MRC AWNP.
ISAC Reply 1E deleted from MRC AWNP.
ISAC Reply 1F deleted from MRC AWNP.
ISAC Reply 1G deleted from MRC AWNP.
ISAC Reply 1H deleted from MRC AWNP.
ISAC Reply 1J deleted from MRC AWNP.
ISAC Reply 1K deleted from MRC AWNP.
ISAC Reply 1L deleted from MRC AWNP.
ISAC Reply 1M deleted from MRC AWNP.
MRC AMNE has been deleted
MRC CWGW has been deleted
MRC CWHC has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED31783*)
APPAJOUTPUT VOLTAGE RATING
THE OUTPUT VALUE/S/,OR RANGE OF VALUES,FOR WHICH THE ITEM IS RATED.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 & 4 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(APPA3DSNJBKB2.0*;APPA3DSNJBKB2.0$JBKB2.0*;APPA3DSNJBKB2.0$$JBKB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DSK | SINGLE POWER OUTPUT |
| 3DSL | MULTIPLE POWER OUTPUTS W/IDENTICAL RATINGS |
| 3DSM | FIRST POWER OUTPUT |
| 3DSN | SECOND POWER OUTPUT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB62) | Reply |
| B | AC |
| C | DC |
| Table 3 |
| Reply Code (AB63) | Reply |
| K | KILOVOLTS |
| M | MEGAVOLTS |
| U | MICROVOLTS |
| L | MILLIVOLTS |
| V | VOLTS |
| Table 4 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CWGHJOUTPUT CURRENT RATING
THE OUTPUT CURRENT RATING AT WHICH THE ITEM IS DESIGNED TO OPERATE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 & 4 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWGH3DSKJCUC2.0*;CWGH3DSKJCUC2.0$JCUC2.0*;CWGH3DSKJCUC2.0$$JCUC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DSK | SINGLE POWER OUTPUT |
| 3DSM | FIRST POWER OUTPUT |
| 3DSN | SECOND POWER OUTPUT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB62) | Reply |
| B | AC |
| C | DC |
| Table 3 |
| Reply Code (AC30) | Reply |
| A | AMPERES |
| U | MICROAMPERES |
| L | MILLIAMPERES |
| N | NANOAMPERES |
| B | VOLT-AMPERE |
| Table 4 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CWGN*DOUTPUT PHASE
THE NUMBER OF OUTPUT ALTERNATING CURRENT PHASES.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CWGN3DSKDB*;CWGN3DSKDB$DC*;CWGN3DSKDB$$DC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DSK | SINGLE POWER OUTPUT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| C | THREE |
| B | TWO |
BGQR*JOUTPUT WATTAGE RATING
THE RATED OUTPUT POWER THAT AN ITEM CAN SAFELY CONSUME OR PROVIDE,MEASURED IN WATTS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BGQR3DSKJATB2.0*;BGQR3DSKJATB2.0$JATB2.0*;BGQR3DSKJATB2.0$$JATB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DSK | SINGLE POWER OUTPUT |
| 3DSL | MULTIPLE POWER OUTPUTS W/IDENTICAL RATINGS |
| 3DSM | FIRST POWER OUTPUT |
| 3DSN | SECOND POWER OUTPUT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB49) | Reply |
| BC | KILOWATTS |
| AT | WATTS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BGHY*DOUTPUT CONTROL TYPE
INDICATES THE TYPE OF OUTPUT CONTROL PROVIDED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(BGHY3DSKDABE*;BGHY3DSKDABE$DAFK*;BGHY3DSKDABE$$DAFK*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DSK | SINGLE POWER OUTPUT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AL37) | Reply |
| AFK | AC-DC |
| AFL | CALIBRATION |
| AFM | COARSE CURRENT ADJUSTMENT |
| AFN | COARSE VOLTAGE ADJUSTMENT |
| AFP | CURRENT LIMIT |
| AFQ | FINE CURRENT ADJUSTMENT |
| AFR | FINE VOLTAGE ADJUSTMENT |
| AFZ | FIXED VOLTAGE |
| AFS | IMPEDANCE RANGE |
| AFT | POLARITY POSITIVE-NEGATIVE SWITCH |
| AFW | RANGE |
| ABE | SWITCH |
| AFY | VOLTAGE ADJUSTMENT |
| AFX | VOLTAGE RANGE |
BGHX*AOUTPUT CONTROL QUANTITY
THE NUMBER OF OUTPUT CONTROL(S) PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BGHXA10*)
CWHF*AOUTPUT CONNECTION QUANTITY
THE NUMBER OF ELECTRICAL OUTPUT CONNECTIONS ON THE ITEM.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(CWHF3DSKA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DSK | SINGLE POWER OUTPUT |
| 3DSM | FIRST POWER OUTPUT |
| 3DSN | SECOND POWER OUTPUT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CWHJ*DOUTPUT CONNECTION TYPE
INDICATES THE TYPE OF ELECTRICAL OUTPUT CONNECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CWHJ3DSODACB*;CWHJ3DSODACB$DACR*;CWHJ3DSODACB$$DACR*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DSK | SINGLE POWER OUTPUT |
| 3DSM | FIRST POWER OUTPUT |
| 3DSN | SECOND POWER OUTPUT |
| 3DSO | THIRD POWER OUTPUT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN89) | Reply |
| AFZ | BANANA JACK |
| AAB | BANANA PLUG |
| ABL | BINDING POST |
| AKT | BLADE |
| ABM | BRACKET |
| AGA | BUS (BAR) CONDUCTOR |
| AKF | BUTTON |
| AKW | CAUTERY ELECTRODE CABLE |
| AKX | COIL SPRING |
| ALC | CONNECTOR WITH LEADS |
| AKY | CONNECTOR, CAUTERY ELECTRODE |
| AKZ | CONNECTOR, COAXIAL PLUG |
| ACN | CONNECTOR, PLUG |
| AAF | CONNECTOR, RECEPTACLE |
| ALA | CONNECTOR, RECEPTACLE COAXIAL |
| ALB | CONNECTOR, SURGICAL LIGHT CABLE |
| AAH | FERRULE |
| ALD | LUG BATTERY TERMINAL |
| ALE | NUT-BOLT |
| AGH | PHONE JACK |
| AKM | PHONE PLUG |
| ADY | PIN PLUG |
| ACR | PRINTED CIRCUIT |
| ALF | QUICK DISCONNECT |
| ALG | RECEPTACLE, ELECTRICAL |
| ALH | RECEPTACLE, SURGICAL LIGHT CABLE |
| ABQ | SCREW |
| ALJ | SNAP-ON |
| AFF | SOLDER LUG |
| ALK | SOLDER POST |
| AAS | SOLDER STUD |
| AEK | SOLDERLESS LUG |
| AHK | SPRING CLIP |
| ALL | SURGICAL LIGHT CABLE |
| ALM | TAPERED POST |
| ALN | TERMINAL CAP |
| ALP | TERMINAL STRIP |
| ALQ | THREADED NUT |
| ALR | THREADED POST |
| ABD | THREADED STUD |
| ACB | TURRET |
| ACC | WIRE LEAD |
ASCX*DLOAD TYPE
INDICATES THE TYPE OF LOAD FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ASCX3DSKDAD*;ASCX3DSKDAD$DAE*;ASCX3DSKDAD$$DAE*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DSK | SINGLE POWER OUTPUT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AK53) | Reply |
| AE | CAPACITIVE |
| AD | INDUCTIVE |
| AC | RESISTIVE |
CXNJ*APOWER SUPPLIES PROGRAMMED PER SYSTEM
THE NUMBER OF POWER SUPPLIES CONTROLLED BY A PROGRAMMABLE POWER SUPPLY.
Enter the numeric reply with a minimum of one digit.
(CXNJA10*)
CWWZ*BPOWER SUPPLY EFFICIENCY BATTERY
THE POWER SUPPLY OPERATIONAL EFFICIENCY WHEN CONNECTED TO A BATTERY(IES).
Enter a reply with a minimum of one digit on either side of the decimal point.
(CWWZB2.0)
AWNP*JPOWER SUPPLY OUTPUT VOLTAGE RATING
THE VALUE,OR RANGE OF VALUES,OF OUTPUT OF THE POWER SUPPLY.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWNP3DSLJMA2.0*;AWNP3DSLJMA2.0$JMA2.0*;AWNP3DSLJMA2.0$$JMA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DSL | MULTIPLE POWER OUTPUTS W/IDENTICAL RATINGS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB63) | Reply |
| K | KILOVOLTS |
| M | MEGAVOLTS |
| U | MICROVOLTS |
| L | MILLIVOLTS |
| V | VOLTS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CWHY*HBATTERY FEATURE AND TYPE
AN INDICATION OF WHETHER OR NOT THE BATTERY IS RECHARGEABLE AND THE TYPE OF BATTERY.
Enter the applicable Reply Code from Tables 1 & 2 below.
(CWHYHBMGAB2.0*;CWHYHBMGAB2.0$HBMGAB2.0*;CWHYHBMGAB2.0$$HBMGAB2.1*)
| Table 1 |
| Reply Code (AK95) | Reply |
| BMG | NONRECHARGEABLE |
| BMH | RECHARGEABLE |
| Table 2 |
| Reply Code (AP68) | Reply |
| AB | ALKALINE |
| AC | FUEL CELL |
| AD | LEAD ACID CELL |
| AE | LITHIUM |
| AF | MERCURY |
| AG | NICKEL CADMIUM |
| AH | SILVER OXIDE |
AEXR*ABATTERY QUANTITY
THE NUMBER OF BATTERIES REQUIRED FOR OPERATION.
Enter the numeric reply with a minimum of one digit.
(AEXRA10*)
CWJF*DBATTERY LOCATION
INDICATES THE LOCATION OF THE BATTERY.
Enter the applicable reply code from the table below
(CWJFDABX*;CWJFDABY$DABY*)
| Table 1 |
| Reply Code (AJ91) | Reply |
| ABY | EXTERNAL |
| ABX | INTERNAL |
CWWB*BBATTERY RECOVERY TIME
THE TIME REQUIRED TO CHARGE A BATTERY(IES) TO ITS RATED CAPACITY AFTER A PERIOD OF DISCHARGE.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CWWBB2.0)
CXMN*ABATTERY SWITCHING TIME
THE TIME REQUIRED FOR A BATTERY POWER SUPPLY TO SWITCH FROM STANDBY MODE TO FULL RATED OUTPUT POWER.
Enter the alpha-numeric reply with a minimum of one character.
(CXMNAX8)
CXMX*BBATTERY POWER SUPPLY EMERGENCY OPERATING TIME
THE EMERGENCY OPERATING TIME A BATTERY POWER SUPPLY CAN DELIVER FULL RATED OUTPUT VOLTAGE/CURRENT BEFORE THE OUTPUT DROPS BELOW A SPECIFIED VALUE.
Enter the emergency operating time in minutes with a minimum of one digit on either side of the decimal point.
(e.g., CXMXB1.5*; CXMXB1.5$$B3.0*)
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
CWKG*DVENTILATION DESIGN TYPE
INDICATES THE TYPE OF DESIGN PROVIDED FOR VENTILATION OF THE ITEM.
Enter the applicable reply code from the table below
(CWKGDABM*;CWKGDAAM$DABL*;CWKGDAAM$$DABL*)
| Table 1 |
| Reply Code (AN05) | Reply |
| ABB | AIR COOLED |
| AAK | AMBIENT AIR |
| AAX | CONVECTION |
| ABG | DUAL FAN |
| ABH | EXTERNAL BLOWER |
| ABJ | FINS |
| AAM | INTEGRAL BLOWER |
| ABK | INTERNAL BLOWER |
| ABL | LOUVERS |
| ABM | OIL COOLED |
| ABN | SINGLE FAN |
| AAH | WATER COOLED |
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable reply code from the table below
(ADZCDABW*;ADZCDAAD$$DAAG*)
| Table 1 |
| Reply Code (AA65) | Reply |
| ABY | ACID RESISTANT |
| ADC | AIRTIGHT |
| AAC | CORROSION RESISTANT |
| ADG | DRIP TIGHT |
| AAD | DRIPPROOF |
| AAE | DUSTPROOF |
| AFJ | ELECTRICALLY INSULATED |
| AAG | EXPLOSION PROOF |
| AAJ | FIRE RESISTANT |
| AAM | FUNGUS PROOF |
| ADH | GENERAL PURPOSE |
| AFK | HERMETICALLY SEALED |
| AFL | MAGNETIC SHIELD |
| AAT | MOISTURE PROOF |
| AFM | NUCLEAR HARDENED |
| AAY | OIL TIGHT |
| AAZ | PRESSURE PROOF |
| AFN | PRESSURIZED |
| ADK | RAIN TIGHT |
| AFQ | RUST RESISTANT |
| AFP | RUSTPROOF |
| ADL | SALT SPRAY PROOF |
| ABQ | SALT SPRAY RESISTANT |
| ABD | SHOCK PROOF |
| ABR | SPLASH PROOF |
| ABW | SUBMERSIBLE |
| ABL | WATERTIGHT |
| ABM | WEATHERPROOF |
AKAE*JMAXIMUM OPERATING ALTITUDE RATING
THE MAXIMUM ALTITUDE AT WHICH THE ITEM IS RATED TO FUNCTION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKAEJF2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
ABHPJOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAB2.0*;ADAVJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CWKM*AWARM UP TIME IN MINUTES
THE TIME REQUIRED FOR A POWER SUPPLY(IES) TO REACH THE FULL OPERATING POTENTIAL FOR WHICH IT IS RATED,EXPRESSED IN MINUTES.
Enter the numeric reply with a minimum of one digit.
(CWKMA10*)
AMQY*DINSTALLATION DESIGN
THE INSTALLATION FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(AMQYDAQ*;AMQYDEL$DEE*;AMQYDEL$$DEE*)
| Table 1 |
| Reply Code (AJ17) | Reply |
| BL | BASE |
| AQ | BENCH |
| DY | BOLT |
| DZ | BRACKET |
| EA | CABINET WITH COMPLETE HARDWARE |
| AS | CASE |
| EB | CRADLE IN CABINET |
| EC | FLANGE |
| AY | FLOOR |
| ED | HOLE |
| AP | PANEL |
| EE | PORTABLE CASE |
| AZ | RACK |
| EF | SHOCK |
| EG | SLIDE |
| EH | SLIDE SUPPORT |
| EJ | SLOT |
| EK | STUD |
| BA | TABLE |
| EL | THREADED STUD |
| CJ | WALL |
AEAS*GMAJOR COMPONENTS
THE PRINCIPAL PARTS THAT ARE INCLUDED IN AN ASSEMBLED UNIT.
Enter clear text.
(AEASGCLEARTEXT)
CWWJ*APROGRAM COMPATIBILITY
THE PROGRAM(S) FOR WHICH THE POWER SUPPLY IS DESIGN COMPATIBLE.
Enter the alpha-numeric reply with a minimum of one character.
(CWWJAS7)
AJJY*ADOCUMENT SOURCE
THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER SOURCE,WHICH CONTROLS THE DOCUMENT.
Enter the alpha-numeric reply with five character(s) exactly.
(AJJYAK4U2G)
AYNH*JOPERATING AMBIENT TEMP RANGE
THE AMBIENT TEMPERATURE RANGE AT WHICH THE ITEM IS DESIGNED TO OPERATE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AYNHJFM32.0/P50.0*;AYNHJFM32.0/P50.0$$JF*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCJQ*;CBBLDCJH$$DCJE*)
| Table 1 |
| Reply Code (AN47) | Reply |
| CJE | AC AMMETER |
| CJF | AC VOLTMETER |
| CJG | AUTO PARALLEL OPERATING |
| BHT | BATTERY CHARGER |
| CJH | BATTERY CHECK SWITCH |
| CJJ | BATTERY CONDITION METER |
| CJK | CALIBRATED OUTPUT SIGNAL |
| CJL | CIRCUIT BREAKER |
| CJM | CIRCUIT OVERLOAD PROTECTION DEVICE |
| AJD | CURRENT REGULATOR CIRCUIT |
| CJN | DC AMMETER |
| CJP | DC VOLTMETER |
| CJQ | DIGITAL AMMETER |
| CJR | DIGITAL POTENTIOMETER |
| CJS | DIGITAL VOLTMETER |
| CJT | EMI FILTER |
| AQZ | FILTER |
| CJW | FUNCTION SWITCH |
| BGP | FUSE |
| CJX | GROUND WIRE TERMINAL |
| CJY | GROUNDING |
| CJZ | GROUNDING STRAP |
| BGR | INDICATOR LIGHT |
| CKA | INPUT FILTER |
| CKB | INPUT FREQUENCY RANGE SWITCH |
| CKC | INPUT TERMINAL BOARD |
| CKD | INPUT TO CASE ISOLATION |
| CKE | INPUT TO OUTPUT ISOLATION |
| CKF | INPUT VOLTAGE RANGE SWITCH |
| CKG | METER CALIBRATOR |
| AKH | MICRO SWITCH |
| CKH | MODE SELECTION SWITCH |
| CKJ | OHMMETER |
| ADC | ON-OFF SWITCH-INDICATOR |
| CKK | OUTPUT FILTER |
| CKL | OUTPUT TERMINAL |
| CKM | OUTPUT TERMINAL BOARD |
| CKN | OUTPUT TO CASE ISOLATION |
| CKP | OVER CURRENT PROTECTOR |
| CKQ | OVER TEMPERATURE PROTECTION |
| CKR | OVER VOLTAGE PROTECTOR |
| ADS | PILOT LIGHT |
| CCR | POTENTIOMETER |
| CKS | POWER TO OUTPUT INDICATOR LIGHT |
| AWF | PROGRAMMABLE |
| ASA | REMOTE CONTROL |
| CKT | REMOTE ERROR SENSING CAPABILITY |
| CKW | REMOTE PROGRAMMING |
| CKX | REVERSE VOLTAGE PROTECTION |
| CKY | RHEOSTAT |
| CKZ | STANDBY SWITCH |
| CLA | SWITCHED OUTPUT CONNECTOR RECEPTACLE |
| CLB | TIMING CLOCK |
| CLC | TIMING SWITCH |
| BHF | TOGGLE SWITCH |
| CLD | UNSWITCHED OUTPUT CONNECTOR RECEPTACLE |
| CLE | VARIABLE OUTPUT ROTARY SWITCH |
| CLF | VOLTAGE ADJUSTMENT |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDAZA000*;PRMTDRHA000$$DIRA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJRHA000F2.0*;PMWTJRHA000F2.0$$JRHA000F2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAZA0002.0*;PMLCJAZA0002.0$$JAZA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
AGDH*AWHEEL QUANTITY
THE NUMBER OF WHEELS INCLUDED ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AGDHA10*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information