An item consisting of contacts, a magnetic core, and a coil with or without inclosure which is used to repeatedly establish and break a circuit. The item does not provide overload protection and is not used in line to control any other electrical controls. Excludes:RELAY, ELECTROMAGNETIC and STARTER, MOTOR.l circuit. Exludes RELAY, ELECTRO-MAGNETIC and STARTER, MOTOR.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED31517*)
ANQCDNATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION STANDARDS DESIGN
AN INDICATION OF WHETHER OR NOT THE ITEM IS DESIGNED IN CONFORMANCE WITH THE NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA) STANDARDS.
Enter the applicable reply code from the table below
(ANQCDM)
| Table 1 |
| Reply Code (AJ97) | Reply |
| M | DESIGNED PER NEMA STD |
| P | NOT DESIGNED PER NEMA STD |
AFLWDACTUATION METHOD
THE MEANS BY WHICH THE ITEM IS ACTUATED.
Enter the applicable reply code from the table below
(AFLWDCE*;AFLWDCF$DCF*)
| Table 1 |
| Reply Code (AC58) | Reply |
| CE | MAGNETIC |
| CF | MANUAL |
ANCNDOPERATING VOLTAGE CHARACTERISTIC
AN INDICATION OF THE CHARACTERISTIC OF THE OPERATING VOLTAGE.
Enter the applicable reply code from the table below
(ANCNDAC*;ANCNDAB$DAB*)
| Table 1 |
| Reply Code (AJ45) | Reply |
| AB | FULL |
| AC | REDUCED |
AGLDDPERFORMANCE TYPE
INDICATES THE PERFORMANCE CAPABILITY OF THE ITEM OR COMPONENT.
Enter the applicable reply code from the table below
(AGLDDAX*;AGLDDAT$DAW*;AGLDDAT$$DAW*)
| Table 1 |
| Reply Code (AE89) | Reply |
| AT | AUTOMATIC |
| AW | MANUAL |
| AX | SEMIAUTOMATIC |
AKPSDDUTY CYCLE
THE WORKING PERIOD UNDER WHICH THE ITEM WAS DESIGNED TO OPERATE.
Enter the applicable reply code from the table below
(AKPSDAAD*;AKPSDAAF$DAAE*;AKPSDAAF$$DAAE*)
| Table 1 |
| Reply Code (AD63) | Reply |
| AAE | CONTINUOUS |
| AAF | INTERMITTENT |
| AAD | VARIABLE |
ANDXJAMBIENT TEMP
THE TEMPERATURE OF THE MEDIUM SURROUNDING AN ITEM AT WHICH IT CAN BE OPERATED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ANDXJF2.0*;ANDXJF2.0$JF2.0*;ANDXJF2.0$$JF2.1*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
AQZFDCONTROL TYPE
INDICATES THE TYPE OF CONTROL.
Enter the applicable reply code from the table below
(AQZFDACK*;AQZFDAAY$DACK*)
| Table 1 |
| Reply Code (AL37) | Reply |
| ACK | LOCAL |
| AAY | REMOTE |
ABFEDHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION
THE SPECIFIC COMMERCIAL RATING WHICH CLASSES THE ITEM AS TO WHAT DEGREE THE ITEM WILL WITHSTAND ENVIRONMENTAL ELEMENTS AND/OR HAZARDOUS LOCATIONS.
Enter the applicable reply code from the table below
(ABFEDCH*;ABFEDCK$DBD*;ABFEDCK$$DBD*)
| Table 1 |
| Reply Code (AB27) | Reply |
| AA | ACID RESISTANT |
| BM | BUREAU OF MINES EXPLOSION PROOF-NEMA TYPE 10 |
| CG | DRIPPROOF |
| FS | DRIPTIGHT |
| AC | DRIPTIGHT-NEMA TYPE 2 |
| CF | DUSTPROOF |
| AD | DUSTPROOF-NEMA TYPE 13 |
| DY | DUSTTIGHT |
| AE | DUSTTIGHT-NEMA TYPE 5 |
| CE | EXPLOSION PROOF |
| CH | FUNGUS RESISTANT |
| GN | GENERAL PURPOSE |
| AP | GENERAL PURPOSE-NEMA TYPE 1 |
| AY | HAZARDOUS LOCATION, CLASS I, GROUP A, NEMA TYPE 7 |
| BC | HAZARDOUS LOCATION, CLASS I, GROUP A, NEMA TYPE 8 |
| AZ | HAZARDOUS LOCATION, CLASS I, GROUP B, NEMA TYPE 7 |
| BD | HAZARDOUS LOCATION, CLASS I, GROUP B, NEMA TYPE 8 |
| BA | HAZARDOUS LOCATION, CLASS I, GROUP C, NEMA TYPE 7 |
| BE | HAZARDOUS LOCATION, CLASS I, GROUP C, NEMA TYPE 8 |
| BB | HAZARDOUS LOCATION, CLASS I, GROUP D, NEMA TYPE 7 |
| BF | HAZARDOUS LOCATION, CLASS I, GROUP D, NEMA TYPE 8 |
| BG | HAZARDOUS LOCATION, CLASS II, GROUP E, NEMA TYPE 9 |
| BJ | HAZARDOUS LOCATION, CLASS II, GROUP G, NEMA TYPE 9 |
| BK | INDUSTRIAL USE-NEMA TYPE 12 |
| BR | MOISTURE RESISTANT |
| CJ | OILTIGHT |
| CK | RAINPROOF |
| EM | RAINTIGHT |
| AR | RAINTIGHT-NEMA TYPE 3R |
| GC | SALT SPRAY PROOF |
| EJ | SHOCK PROOF |
| CL | SPRAYTIGHT |
| DZ | SUBMERSIBLE |
| AS | SUBMERSIBLE-NEMA TYPE 6 |
| CM | WATERPROOF |
| CN | WATERTIGHT |
| AU | WATERTIGHT-NEMA TYPE 4 |
| DX | WEATHERPROOF |
| AV | WEATHERPROOF-NEMA TYPE 3 |
ANRH*BAMP SIZE RATING
THE AMPERE SIZE DESIGNATION FOR SPECIAL DESIGN TYPE ITEMS WHICH ARE RATED IN AMPERE SIZE RATHER THAN HORSEPOWER.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ANRHB2.0*;ANRHB2.0$$BM2.0*)
ACYR*JDC VOLTAGE RATING
THE VALUE,OR RANGE OF VALUES,OF DIRECT CURRENT POTENTIAL FOR WHICH THE ITEM IS RATED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACYRJVA2.0*;ACYRJVA2.0$$JVA2.1*)
| Table 1 |
| Reply Code (AB63) | Reply |
| K | KILOVOLTS |
| V | VOLTS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ACUT*BDIRECT CURRENT RATING IN AMPS
THE DIRECT CURRENT RATING FOR WHICH THE ITEM IS RATED,EXPRESSED IN AMPERES.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ACUTB2.0*;ACUTB2.0$$BM2.0*)
ANCY*BHORSEPOWER RATING
AN INDICATION OF THE RATED HORSEPOWER OF THE ITEM.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ANCYB2.0*;ANCYB2.0$$BM2.0*)
ACYN*JAC VOLTAGE RATING
THE VALUE,OR RANGE OF VALUES,OF ROOT MEAN SQUARE POTENTIAL FOR WHICH THE ITEM IS RATED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACYNJKB2.0*;ACYNJKB2.0$$JKB2.1*)
| Table 1 |
| Reply Code (AB63) | Reply |
| K | KILOVOLTS |
| V | VOLTS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BDWW*JWATTAGE RATING
THE RATED POWER THAT AN ITEM CAN SAFELY CONSUME OR PROVIDE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BDWWJBC2.0*;BDWWJBC2.0$$JBC2.1*)
| Table 1 |
| Reply Code (AB49) | Reply |
| BC | KILOWATTS |
| AT | WATTS |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDBWW*;CBBLDBDT$DAFC*;CBBLDBDT$$DAFC*)
| Table 1 |
| Reply Code (AN47) | Reply |
| FUE | ACCESSORY LOCATION EXTERNAL |
| FUF | ACCESSORY LOCATION INTERNAL |
| AFC | CIRCUIT PROTECTION FUSE |
| AAK | ELECTROSTATIC DISCHARGE CAPABILITY |
| BSZ | ELECTROSTATIC SENSITIVE |
| BDT | ELECTROSTATIC SHIELD |
| BWW | REVERSIBLE |
| FNY | ROHS DIRECTIVE COMPLIANCE |
ANPZ*DENCLOSURE FEATURE
AN INDICATION OF THE FEATURE/S/ OF THE ENCLOSURE.
Enter the applicable reply code from the table below
(ANPZDABC*;ANPZDAAG$$DAAD*)
| Table 1 |
| Reply Code (AJ95) | Reply |
| ADD | AIRTIGHT |
| AAB | CARD CAGE |
| AAC | CLOSED FRAME |
| AAD | DRIPPROOF |
| ABJ | DUST TIGHT |
| ABK | DUST-IGNITION PROOF |
| AAE | DUSTPROOF |
| ADQ | ENCAPSULATED |
| AAF | ENCLOSED, VENTILATED ENCLOSURE |
| AAG | ENVIRONMENTAL PROOF |
| AAH | EXPLOSION PROOF |
| AAZ | FULLY ENCLOSED |
| ABN | FUNGUS PROOF |
| AAJ | FUNGUS RESISTANT |
| AFM | GENERAL PURPOSE |
| AAL | HERMETIC |
| AAK | HERMETICALLY SEALED |
| AAM | MOISTURE |
| ABT | MOISTURE PROOF |
| AAN | OILTIGHT |
| AAP | OPEN |
| AAQ | OPEN FRAME |
| ABA | PARTIALLY ENCLOSED |
| AAR | PROTECTED |
| AAS | RAINPROOF |
| ACJ | SPLASH PROOF |
| AAT | SPRAY TIGHT |
| ACK | SUBMERSIBLE |
| ACN | TOTALLY ENCLOSED |
| AAW | VENTILATED |
| AAY | WATERPROOF |
| AAX | WATERTIGHT |
| ABC | WEATHERPROOF |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAC2.0*;ADAVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALGC*GMOUNTING CONFIGURATION
THE PATTERN OR ARRANGEMENT THAT DESCRIBES THE MOUNTING CONFIGURATION OF THE ITEM.
Enter clear text.
(ALGCGCLEARTEXT)
ANRK*DSWITCH FUNCTIONAL POSITIONS
AN INDICATION OF THE VARIOUS FUNCTIONAL SWITCHING POSITIONS.
Enter the applicable reply code from the table below
(ANRKDADM*;ANRKDACR$$DAAB*)
| Table 1 |
| Reply Code (AK03) | Reply |
| AFA | 1 |
| AFB | 2 |
| AFC | 3 |
| AEE | AHEAD |
| AAB | AUTOMATIC |
| AFL | AUTOMATIC HS |
| AFM | AUTOMATIC LS |
| ADA | AUTOMATIC-HAND |
| ADD | AUTOMATIC-OFF-TEST |
| AED | BACK |
| ACH | BYPASS |
| ACJ | CLOSE |
| ADC | CONSTANT SPEED |
| AFP | DOWN |
| AAC | EMERGENCY |
| AFE | EMERGENCY LOWER |
| AAD | EMERGENCY RUN |
| AES | EMERGENCY START |
| ACK | EMERGENCY STOP |
| AET | EVER-RUN |
| AAE | FAST |
| AFG | FAST RESET EMERGENCY RUN |
| ACL | FAST START |
| AAF | FAST START EMERGENCY |
| ACG | FORWARD |
| AAG | FORWARD EMERGENCY |
| ADK | GO |
| AEF | HAND |
| AAH | HIGH EMERGENCY RUN |
| AAJ | HIGH SPEED |
| ACN | HIGH SPEED RESET |
| ACQ | HIGH START |
| ADW | HIGH-LOW |
| AEG | HOIST |
| AEH | HS |
| ADS | INCH-DOWN |
| ADR | INCH-UP-STOP |
| ACW | IN-RISE |
| AEM | L1 |
| ADE | L2 |
| AEN | L3 |
| AAK | LOCK |
| ACS | LOW |
| AAL | LOW EMERGENCY RUN |
| AAN | LOW SPEED |
| ACP | LOW SPEED RESET |
| ACR | LOW START |
| AAM | LOWER |
| ACY | LOW-HIGH |
| AEL | LP |
| AEJ | LS |
| ADB | MAIN |
| AAP | MANUAL |
| AFJ | MANUAL HS |
| AFK | MANUAL LS |
| ACD | MEDIUM |
| AEX | MOTOR AND PUMP RM |
| ADL | NEON PILOT LITE |
| AEY | NO. 1 |
| AEQ | NO. 1 PUMP |
| AEZ | NO. 2 |
| AER | NO. 2 PUMP |
| ADG | NORMAL |
| AAQ | OFF |
| ADQ | OFF-STOP |
| AAR | ON |
| ADF | OPEN |
| ACX | OUT-DIVE |
| ACT | PAY OUT |
| AEK | PR |
| AAS | RAISE |
| AAT | REMOTE |
| ADH | REMOTE CONTROL OFF |
| ADJ | REMOTE CONTROL ON |
| AAW | RESET |
| ADX | RESET-OVERRUN |
| ADY | RESET-UNDERRUN |
| AEC | RESET-WAIT TWO MINUTES MOVE TO OFF |
| AAX | REST |
| AAY | REVERSE |
| AAZ | REVERSE EMERGENCY |
| ABA | RUN |
| ADP | SAFE-RUN |
| ABB | SEMI-AUTOMATIC |
| ABC | SLOW |
| AFF | SLOW RESET EMERGENCY RUN |
| ACM | SLOW START |
| ABD | SLOW START EMERGENCY |
| AFH | STANDBY |
| ABE | START |
| ACZ | START EMERGENCY RUN |
| ADN | START RUN |
| ABF | STOP |
| ADT | STOP-RUN |
| AEP | TD RESET |
| ADZ | TEST |
| ADM | TIME |
| AEB | TIMER RESET |
| AFD | TRIPPED |
| AFN | UP |
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDQD*;ENACDAK$DQH*;ENACDAK$$DQH*)
| Table 1 |
| Reply Code (EN02) | Reply |
| QD | HEXAVALENT CHROMIUM ALTERNATIVE |
| AK | NON-CADMIUM PRODUCT |
| QH | NON-LEAD ALTERNATIVE PRODUCTS |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
ALCD*GUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter clear text.
(ALCDGCLEARTEXT)
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDAZA000*;PRMTDAUA000$DIRA000*;PRMTDAUA000$$DIRA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJPTA000R2.0*;PMWTJPTA000R2.0$$JPTA000R2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJRTA0002.0*;PMLCJRTA0002.0$JRTA0002.0*;PMLCJRTA0002.0$$JRTA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAS3)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information