A flexible plastic material in roll or sheet form bearing a coating which, when exposed to a light source and then given a chemical treatment, produces a visible black and white or color image. The roll film may come with or without perforations, sound track, leader, and/or trailer. The sheet film may be cut in sizes that can be easily handled one sheet at a time, or prepared in pack form where a quantity of sheets are enclosed in a pocket so designed that individual exposures can be made by removing tabbed shields. Photographic film may be used for, but not be limited to aerial photography, motion picutre, microfilm, graphic arts, portrait, reproductions, and the like.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED30432*)
AKGP*DFILM TYPE
THE PRIMARY GROUPING WHICH INDICATES THE APPLICATION OF THE FILM.
Enter the applicable reply code from the table below
(AKGPDAE)
| Table 1 |
| Reply Code (AG37) | Reply |
| AB | AERIAL |
| AC | BROWNPRINT |
| AD | MICROFILM |
| AE | MOTION PICTURE |
| AF | PHOTOMECHANICAL |
| AG | RECORDING |
| AH | STILL PICTURE |
AKGR*DFILM SUBTYPE
A CATEGORY WITHIN THE PRIMARY GROUPING BY WHICH FILM IS IDENTIFIED.
Enter the applicable reply code from the table below
(AKGRDAZ*;AKGRDAV$$DAL*)
| Table 1 |
| Reply Code (AG32) | Reply |
| AA | ADVANCED PHOTO SYSTEM |
| AB | CAMERA |
| AK | CONTACT |
| AV | COPY NEGATIVE |
| AH | DIRECT POSITIVE |
| AC | DUPLICATING |
| AS | INSTRUMENT |
| AG | MAGNETIC SOUND STRIPE |
| AU | MAPPING |
| AL | MASKING |
| AM | NEGATIVE |
| AN | POSITIVE |
| AP | PROJECTION |
| AW | RECONNAISSANCE |
| AD | RELEASE |
| AJ | SCREEN |
| AQ | SEPARATION NEGATIVE |
| AX | SLIDE |
| AR | STRIPPING |
| AT | TELEVISION |
| AY | TRANSPARENCY |
| AE | VARIABLE AREA SOUND RECORDING |
| AF | VARIABLE DENSITY SOUND RECORDING |
| AZ | X-RAY |
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDPPA000*;MATTDPCA000$DALA000*;MATTDPCA000$$DALA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| GSA000 | GLASS |
| PPA000 | PAPER |
| PCA000 | PLASTIC |
| PCAN00 | PLASTIC CELLULOSE ACETATE |
| PCBN00 | PLASTIC CELLULOSE ACETATE BUTYRATE |
| PCAAB0 | PLASTIC CELLULOSE TRIACETATE |
| PCW000 | PLASTIC POLYESTER |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| AGA000 | SILVER |
AKGSDEMULSION TYPE
INDICATES THE TYPE OF REPRODUCED IMAGE.
Enter the applicable reply code from the table below
(AKGSDAB)
| Table 1 |
| Reply Code (AG38) | Reply |
| AB | BLACK AND WHITE |
| AC | COLOR |
AKGT*DREPRODUCTION TYPE
INDICATES THE TYPE OF IMAGE DESIGNED TO APPEAR ON THE MATERIAL AFTER EXPOSURE AND DEVELOPMENT.
Enter the applicable reply code from the table below
(AKGTDAE*;AKGTDAB$DAD*;AKGTDAB$$DAD*)
| Table 1 |
| Reply Code (AG39) | Reply |
| AE | DIRECT POSITIVE |
| AK | DIRECT READING POSITIVE |
| AF | DUPLICATING |
| AH | INTERMEDIATE |
| AG | INTERNEGATIVE |
| AB | NEGATIVE |
| AC | POSITIVE |
| AJ | PRINT |
| AD | REVERSAL |
AKGW*DEMULSION SENSITIVITY
THE DEGREE OF RADIANT ENERGY TO WHICH THE EMULSION IS DESIGNED TO REACT TO FORM A LATENT IMAGE UNDER GIVEN EXPOSURE CONDITIONS.
Enter the applicable reply code from the table below
(AKGWDAC*;AKGWDAK$DAH*;AKGWDAK$$DAH*)
| Table 1 |
| Reply Code (AG41) | Reply |
| AL | ARTIFICIAL LIGHT |
| BH | BLACK |
| AD | BLUE SENSITIVE |
| AK | DAYLIGHT |
| AC | EXTENDED ULTRAVIOLET |
| BA | GREEN SENSITIVE |
| AF | HIGH GREEN |
| AJ | INFRARED |
| AE | ORTHOCHROMATIC |
| AG | PANCHROMATIC |
| AH | PANCHROMATIC EXTENDED RED |
| AB | ULTRAVIOLET |
| AA | VISIBLE RADIATION |
| BG | YELLOW SENSITIVE |
AKGX*ARESOLVING POWER
THE DEGREE OF IMAGE DETAIL EXPRESSED IN LINES PER MILLIMETER THAT A SENSITIZED MATERIAL IS CAPABLE OF REPRODUCING.
Enter the numeric reply with a minimum of one digit.
(AKGXA10*)
AETF*DBASE COLOR
THE HUE OR TINT OF THE BASE. PLEASE USE MRC HUES WITH ISAC CODING IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(AETFDYE0000*;AETFDRE0046$DPK0005*;AETFDRE0046$$DPK0005*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BU0004 | BLUE-WHITE |
| MS0065 | BRONZE |
| BR0000 | BROWN |
| MS0013 | BUFF |
| RE0046 | CHERRY |
| CL0000 | CLEAR |
| CR0000 | CREAM |
| CR0001 | CREAM WHITE |
| BU0056 | CYAN |
| MS0096 | FROSTED |
| YE0016 | GOLDENROD |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| MS0060 | MULTICOLOR-INVALID |
| NE0000 | NEUTRAL |
| RG0000 | ORANGE |
| PK0000 | PINK |
| PU0000 | PURPLE |
| RE0000 | RED |
| RE0033 | RUST |
| PK0005 | SALMON |
| WH0000 | WHITE |
| YE0000 | YELLOW |
| YE0006 | YELLOW, CANARY |
AKGZJEXPOSURE INDEX
A NUMERIC VALUE BASED ON THE DEGREE AND SPEED TO WHICH A PHOTOSENSITIVE MATERIAL REACTS WHEN EXPOSED TO A SPECIFIC LIGHT SOURCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit.
(AKGZJAEAD2*;AKGZJAEAD2$$JAEAD3*)
| Table 1 |
| Reply Code (AG44) | Reply |
| AF | AMERICAN NATIONAL STANDARDS INSTITUTE |
| AB | AMERICAN STANDARD ASSOCIATION |
| AD | BRITISH STANDARD INSTITUTION |
| AE | GERMAN STANDARD ORGANIZATION |
| AG | INTERNATIONAL ORGANIZATION FOR STANDARDIZATION |
| AC | UNITED STATES AMERICAN STANDARDS INSTITUTE |
| Table 2 |
| Reply Code (AG43) | Reply |
| AB | DAYLIGHT |
| AD | PHOTOFLOOD |
| AC | TUNGSTEN |
| AE | WHITE FLAME ARC |
AKKE*JBASE MATERIAL THICKNESS
THE MEASUREMENT OF THE SMALLEST DIMENSION OF THE BASE MATERIAL,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKKEJAA2.0*;AKKEJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| B | MILS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJAA2.0*;ABGLJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKMYDUSAGE FORM
THE READY-TO-USE SHAPE OR CONFIGURATION OF AN ITEM.
Enter the applicable reply code from the table below
(AKMYDAAGX)
| Table 1 |
| Reply Code (AE98) | Reply |
| AAAA | PACK |
| AAGX | ROLL |
| AAEN | SHEET |
IF YOU ANSWER MRC AJXE, YOU MUST ANSWER MRC (AKHB)
AJXE*ASIZE DESIGNATOR
A DESIGNATION INDICATING THE SIZE BY WHICH THE ITEM IS COMMERCIALLY KNOWN AND/OR IDENTIFIED.
Enter the alpha-numeric reply with a minimum of one character.
(AJXEAX0)
AKHB*AFILM EXPOSURE QUANTITY
THE NUMBER OF INDIVIDUAL FRAMES /EXPOSURE SECTIONS/ CONTAINED IN A FILM.
Enter the numeric reply with a minimum of one digit.
(AKHBA10*)
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAB2.0*;ABRYJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKHC*DWINDING DEVICE TYPE
INDICATES THE TYPE OF WINDING DEVICE ON WHICH THE ITEM IS WOUND.
Enter the applicable reply code from the table below
(AKHCDAD)
| Table 1 |
| Reply Code (AG46) | Reply |
| AK | CARTRIDGE |
| AC | CORE |
| AB | MAGAZINE |
| AD | SPOOL |
AELU*ATRADE DESIGNATION
THE DESIGNATION BY WHICH THE ITEM IS IDENTIFIED THROUGHOUT INDUSTRY.
Enter the alpha-numeric reply with a minimum of one character.
(AELUAX3)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDFFN*;CBBLDFFK$DFFM*;CBBLDFFK$$DFFM*)
| Table 1 |
| Reply Code (AN47) | Reply |
| FFJ | ANTIHALATION COATED |
| FFK | BLACK DYE BACKED |
| FFL | HIGH SPEED CAMERA PERFORATION |
| FFM | INTEGRAL FILM LEADER |
| FFN | INWARD EMULSION |
| FFP | MATTE BOTH SIDES |
| FFQ | MATTE FRONT SIDE |
| FFR | OUTWARD EMULSION |
| FFS | PERFORATED BOTH EDGES |
| FFT | PERFORATED ONE EDGE |
| FFU | RED PELLOID BACKED |
| FFV | SPLICED FILM LEADER |
| EBH | WATER RESISTANT |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| CS | CONSTRUCTION |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| FN | FINISH |
| FM | FORM |
| FA | FORMULA |
| GR | GRADE |
| GP | GROUP |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| NR | NUMBER |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| QA | QUALITY |
| RN | RANGE |
| RT | RATING |
| RF | REFERENCE NUMBER |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
AKHW*DLOADING CHARACTERISTIC
INDICATES IF THE ITEM MAY BE INSERTED INTO THE APPARATUS IN DAYLIGHT OR REQUIRES DARKROOM CONDITION.
Enter the applicable reply code from the table below
(AKHWDAC)
| Table 1 |
| Reply Code (AG51) | Reply |
| AC | DARKROOM |
| AB | DAYLIGHT |
BBRJ*DSPECIAL HANDLING FEATURE
THE UNUSUAL OR UNIQUE CHARACTERISTIC/S/ OR QUALITY/IES/ OF AN ITEM WHICH NECESSITATES THE ESTABLISHMENT OF A REQUIREMENT FOR SPECIAL HANDLING.
Enter the applicable reply code from the table below
(BBRJDAD*;BBRJDAG$$DAD*)
| Table 1 |
| Reply Code (AM83) | Reply |
| AD | FLAMMABLE |
| AG | POISONOUS |
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAX*;BBRGDAD$DAW*)
| Table 1 |
| Reply Code (AM81) | Reply |
| AD | CONTROLLED HUMIDITY WAREHOUSE |
| AX | DOCK LEVEL UNHEATED WAREHOUSE |
| AE | GENERAL PURPOSE WAREHOUSE |
| AW | GROUND LEVEL UNHEATED WAREHOUSE |
| AJ | UNHEATED WAREHOUSE |
AKHX*ASTORAGE HUMIDITY PERCENTAGE LIMIT
THE HUMIDITY CONDITIONS THAT WILL ADEQUATELY PROTECT AN ITEM OF SUPPLY DURING STORAGE.
Enter the numeric reply with a minimum of one digit.
(AKHXA10*)
AFJQ*JSTORAGE TEMP RANGE
THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFJQJFM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDPTA000*;PRMTDIRA000$DPDA000*;PRMTDIRA000$$DPDA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJAGA000E2.0*;PMWTJAGA000E2.0$$JAGA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAGA000TEXT1234*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information