A general-purpose box which may be reusable and designed specifically for the shipment of goods. It may have facilities for handling by hoist, forklift truck, or by skidding. It may also have provisions for humidity control. For containers designed for specific items, see SHIPPING AND STORAGE CONTAINER (as modified). Excludes:BOX (1), INTERMEDIATE PACKAGING; and CRATE, SHIPPING.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED30092*)
AFPMDASSEMBLY FORM
THE FORM OF ASSEMBLY IN WHICH THE ITEM IS SUPPLIED,WHETHER COMPLETELY ASSEMBLED OR SPECIFYING A DEGREE OF ASSEMBLY WHICH INHERENTLY DESCRIBES THE PRESENCE OF A SPACE SAVING FEATURE.
Enter the applicable reply code from the table below
(AFPMDAF)
| Table 1 |
| Reply Code (AE33) | Reply |
| AB | FLAT |
| AC | FOLDED |
| AD | KNOCKED-DOWN |
| AE | NESTED |
| AF | SET-UP |
AFPXDHUMIDITY CONTROL DESIGN FEATURE
AN INDICATION OF WHETHER OR NOT A DESIGN FEATURE IS PROVIDED FOR CONTROLLING THE HUMIDITY WITHIN THE ITEM.
Enter the applicable reply code from the table below
(AFPXDC)
| Table 1 |
| Reply Code (AA89) | Reply |
| C | NO |
| B | YES |
AFPYJCUBIC CAPACITY
A MEASUREMENT OF THE INTERNAL CAPACITY OF AN ITEM TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE DEPTH AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFPYJE2.0*)
| Table 1 |
| Reply Code (AD42) | Reply |
| D | CUBIC DECIMETERS |
| F | CUBIC FEET |
| B | CUBIC INCHES |
| E | CUBIC METERS |
AFQADSTACKING FEATURE
AN INDICATION OF WHETHER OR NOT A DESIGN FEATURE IS EMPLOYED THAT PROVIDES FOR SAFE AND LEVEL STACKING OF ONE ITEM UPON ANOTHER.
Enter the applicable reply code from the table below
(AFQADC)
| Table 1 |
| Reply Code (AA89) | Reply |
| C | NO |
| B | YES |
AFQGDBOX MANUFACTURER CERTIFICATE
THE CERTIFICATE REQUIRED ON FIBERBOARD SHIPPING CONTAINERS SHOWING THE NAME AND ADDRESS OF THE MANUFACTURER,TOGETHER WITH CERTIFICATION DATA THAT THE CONTAINER HAS BEEN MANUFACTURED AND TESTED IN ACCORDANCE WITH THE REGULATIONS OF THE COMMON CARRIER THAT GOVERNS THE SHIPMENT.
Enter the applicable reply code from the table below
(AFQGDC)
| Table 1 |
| Reply Code (AE40) | Reply |
| C | NOT REQUIRED |
| B | REQUIRED |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3HOUDGSU000*;MATT3HOUDGSU000$DWDA000*;MATT3HOUDGSU000$$DWDA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3HTV | EXTERIOR COVERING |
| 3HYM | INTERIOR COVERING |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| PPC000 | CARDBOARD |
| FBB001 | FABRIC, NYLON |
| FBS000 | FIBER SYNTHETIC |
| WDA000 | FIBERBOARD |
| GSU000 | GLASS CLOTH |
| GSB000 | GLASS FIBER |
| PPA000 | PAPER |
| PPJ000 | PAPERBOARD |
| PCA000 | PLASTIC |
| PCCK00 | PLASTIC CELLULOSE |
| PCCA00 | PLASTIC FOAM |
| PCX000 | PLASTIC POLYETHYLENE |
| PCX001 | PLASTIC POLYETHYLENE HIGH DENSITY |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAD00 | PLASTIC POLYSTYRENE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE |
| PCAAW0 | PLASTIC STYRENE ACRYLONITRILE |
| WDB000 | PLYWOOD |
| PTF000 | POLYETHYLENE FOAM |
| AAA009 | POLYETHYLENE, HIGH MODULUS (HMPE) |
| RSA000 | RESIN SYNTHETIC |
| RCL000 | RUBBER POLYETHYLENE |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| WDC000 | WOOD |
| WDJ000 | WOOD BIRCH |
IF STYLE/REPLY CODE(s) C1, C2, C3, C4, C5, C6, C12, C13, C14, C15, C16, C17, C18, C23, C24, C25, C26, C27, C28, C29, C30, C31, C33, C34 OR C35 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADJT and ADJU and AFEF)
IF STYLE/REPLY CODE(s) C7, C9, C10 OR C11 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AFMR and AFEF and ADJU and ADJT)
IF STYLE/REPLY CODE(s) C8 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AFMR and AFMU and AFEF and ADJU and ADJT)
IF STYLE/REPLY CODE(s) C19, C20, C21 OR C22 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AFMV and AFEF)
IF STYLE/REPLY CODE(s) C32 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AFMW and ADJW and ADJV)
IF STYLE/REPLY CODE(s) C36 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABHP and ABMK)
IF STYLE/REPLY CODE(s) C37 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADJT and AFEF and ADJU)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLC6)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AB10033 | C1 | REGULAR SLOTTED, RSC |
| AB10042 | C10 | PARTIAL TELESCOPE, PTD |
| AB10043 | C11 | DOUBLE COVER, DC |
| AB10044 | C12 | TRIPLE SLIDE, TS |
| AB10045 | C13 | FIVE PANEL FOLDER, FPF |
| AB10046 | C14 | ONE PIECE FOLDER, IPF |
| AB10047 | C15 | FIVE PANEL W/WOODEN ENDS |
| AB10048 | C16 | FIVE PANEL OVERLAP W/WOODEN ENDS |
| AB10049 | C17 | SIX PANEL W/WOODEN ENDS |
| AB10050 | C18 | SIX PANEL OVERLAP W/WOODEN ENDS |
| AB10051 | C19 | OCTAGONAL W/SLOTTED COVER |
| AB10034 | C2 | OVERLAP SLOTTED, OSC |
| AB10052 | C20 | OCTAGONAL W/FLANGE COVER |
| AB10053 | C21 | OCTAGONAL SEGMENTED W/FLANGE COVER |
| AB10054 | C22 | OCTAGONAL SEGMENTED |
| AB10055 | C23 | UNCLEATED ENDS |
| AB10056 | C24 | CLEATED ENDS BUTT JOINTS |
| AB10057 | C25 | CLEATED END MITERED JOINTS |
| AB10058 | C26 | CLEATED END INTERLOCKING CORNERS |
| AB10059 | C27 | WIRE BOUND W/CLEATED ENDS |
| AB10060 | C28 | WIRE BOUND W/WIRED ENDS |
| AB10061 | C29 | CLEATED PANEL STANDARD CORNER |
| AB10035 | C3 | CENTER SPECIAL SLOTTED, CSSC |
| AB10062 | C30 | CLEATED PANEL W/SIDE BATTENS |
| AB10063 | C31 | CLEATED PANEL INTERLOCKING CORNER |
| AB10064 | C32 | TRUNK TYPE UTILITY |
| AB10065 | C33 | CLEATED W/DIAGONAL BATTENS |
| AB10066 | C34 | CLEATED W/VERTICAL BATTENS |
| AB10067 | C35 | CLEATED END AND TOP W/BATTENS |
| AB10068 | C36 | CONEX CARGO TRANSPORTER |
| AB10069 | C37 | TURRET MOUNTING |
| AB10036 | C4 | CENTER SPECIAL OVERLAP SLOTTED, CSO |
| AB10037 | C5 | FULL OVERLAP SLOTTED, FOL |
| AB10038 | C6 | CENTER SPECIAL FULL OVERLAP SLOTTED, CSFOL |
| AB10039 | C7 | HALF SLOTTED, HSC |
| AB10040 | C8 | HALF SLOTTED WITH SLEEVE AND COVER, HSCS |
| AB10041 | C9 | FULL TELESCOPE, FTD |
AFPZ*DCONTAINER LOAD HAZARD DESIGNATION
A DESIGNATION OF THE MOST DIFFICULT TYPE OF LOAD FOR WHICH A CONTAINER IS DESIGNED WITH RESPECT TO THE HAZARDS IMPOSED BY THE ACTIONS OF INTERNAL AND EXTERNAL FORCES.
Enter the applicable reply code from the table below
(AFPZDD)
| Table 1 |
| Reply Code (AE38) | Reply |
| N | NOT RATED |
| B | TYPE I |
| C | TYPE II |
| D | TYPE III |
ADJU*JINSIDE LENGTH
A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJUJAC2.0*;ADJUJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJT*JINSIDE WIDTH
AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJTJAB2.0*;ADJTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFMV*JINSIDE WIDTH ACROSS FLATS
A MEASUREMENT OF THE INSIDE DISTANCE FROM ONE FLAT TO THE OPPOSITE FLAT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFMVJAC2.0*;AFMVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFEF*JINSIDE DEPTH
AN INSIDE MEASUREMENT BETWEEN SPECIFIED POINTS OF AN ITEM,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFEFJAB2.0*;AFEFJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJW*JOUTSIDE LENGTH
A MEASUREMENT OF THE LONGEST OUTSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJWJAA2.0*;ADJWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJV*JOUTSIDE WIDTH
AN OUTSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJVJAB2.0*;ADJVJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFMW*JOUTSIDE HEIGHT
AN OUTSIDE MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN ITEM,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFMWJAC2.0*;AFMWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAC2.0*;ABMKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAB2.0*;ABKWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFMR*JCOVER DEPTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFMRJAA2.0*;AFMRJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFMU*JINNER FLAP LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFMUJAC2.0*;AFMUJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFPE*JFOURTH BOX OVERALL HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFPEJAA2.0*;AFPEJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3HTV | EXTERIOR COVERING |
| 3HYM | INTERIOR COVERING |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
AFPH*JMATERIAL BURSTING STRENGTH
THE MINIMUM FORCE REQUIRED TO RUPTURE THE MATERIAL,EXPRESSED IN SPECIFIED UNITS OF MEASURE PER UNIT OF AREA.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFPHJL2.0*)
| Table 1 |
| Reply Code (AB18) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| V | POUNDS PER SQUARE INCH |
ADJS*DEXTERIOR COLOR
THE HUE OR TINT OF THE EXTERIOR OF THE ITEM.
Enter the applicable reply code from the table below
(ADJSDKH0000*;ADJSDNA0000$DAV0000*;ADJSDNA0000$$DAV0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| A | ANY ACCEPTABLE |
| MS0008 | AQUA |
| AV0000 | AVOCADO |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BR0000 | BROWN |
| BR0008 | BROWN, CHOCOLATE |
| MS0015 | CHARCOAL |
| CL0000 | CLEAR |
| CT0000 | COPPERTONE |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| KH0000 | KHAKI |
| NA0000 | NATURAL |
| KA0000 | OAK |
| LD0000 | OLIVE DRAB |
| RE0000 | RED |
| WA0000 | WALNUT |
| WH0000 | WHITE |
| YE0000 | YELLOW |
AFPL*DINTERIOR COLOR
THE HUE OR TINT OF THE INTERIOR OF THE ITEM.
Enter the applicable reply code from the table below
(AFPLDMS0015*;AFPLDRE0000$DCT0000*;AFPLDRE0000$$DCT0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| A | ANY ACCEPTABLE |
| MS0008 | AQUA |
| AV0000 | AVOCADO |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BR0000 | BROWN |
| BR0008 | BROWN, CHOCOLATE |
| MS0015 | CHARCOAL |
| CL0000 | CLEAR |
| CT0000 | COPPERTONE |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| KH0000 | KHAKI |
| NA0000 | NATURAL |
| KA0000 | OAK |
| LD0000 | OLIVE DRAB |
| RE0000 | RED |
| WA0000 | WALNUT |
| WH0000 | WHITE |
| YE0000 | YELLOW |
AERU*DHANDLING FACILITY TYPE
INDICATES THE TYPE OF PROVISIONS FURNISHED WHICH AID IN PUSHING,PULLING,OR TRANSPORTING THE ITEM.
Enter the applicable reply code from the table below
(AERUDAE*;AERUDAH$DAP*;AERUDAH$$DAP*)
| Table 1 |
| Reply Code (AD28) | Reply |
| AE | FIXED EXTERNAL HANDLES |
| BD | HANDLE ON END |
| BF | HANDLE ON TOP |
| AF | HINGED EXTERNAL HANDLES |
| AH | LIFTING EYES |
| AR | PALLET |
| AS | PULL RING/TAB |
| AG | RECESSED HANDLES |
| AP | SKID |
| AT | SLING |
AFPN*DASSEMBLY METHOD
THE MEANS BY WHICH THE BODY PARTS ARE DESIGNED TO BE FASTENED TOGETHER.
Enter the applicable reply code from the table below
(AFPNDBF*;AFPNDBG$DGA*;AFPNDBG$$DGA*)
| Table 1 |
| Reply Code (AB47) | Reply |
| A | ANY ACCEPTABLE |
| AK | BOLTED |
| NU | DIE CUT |
| BD | FABRIC TAPED |
| BE | GLUED |
| WZ | METAL CLIPPED |
| BF | METAL STAYED |
| BG | NAILED |
| BH | PAPER TAPED |
| BJ | PLASTIC STAYED |
| BK | RIVETED |
| NV | SCORED |
| BL | SCREWED |
| BM | STAPLED |
| GA | STITCHING |
| AS | WELDED |
| BN | WIRE BOUND |
AFPP*DCLOSURE METHOD
THE MEANS PROVIDED TO CLOSE THE OPENING OF THE ITEM.
Enter the applicable reply code from the table below
(AFPPDAK*;AFPPDAL$DAB*;AFPPDAL$$DAB*)
| Table 1 |
| Reply Code (AE35) | Reply |
| EB | CAP |
| AE | DETACHABLE COVER |
| AJ | DETACHABLE END |
| AA | DETACHABLE ENDS |
| AK | DETACHABLE SIDE |
| AB | DETACHABLE SIDES |
| AF | FLAPS |
| AG | HINGED COVER |
| AL | HINGED END |
| AC | HINGED ENDS |
| AM | HINGED SIDE |
| AD | HINGED SIDES |
| AH | HOOD |
| AN | SLIDING SLEEVE |
AFPQ*DCLOSURE FASTENING TYPE
INDICATES THE TYPE OF DEVICE(S) USED TO SECURE THE CLOSURE OF THE ITEM.
Enter the applicable reply code from the table below
(AFPQDKC*;AFPQDAC$DAM*;AFPQDAC$$DAM*)
| Table 1 |
| Reply Code (AE36) | Reply |
| AA | ADHESIVE |
| A | ANY ACCEPTABLE |
| AB | BOLTS |
| KB | CATCH, CLAMPING |
| AD | CLOSURE PLATES |
| AC | COHESIVE |
| AE | COMBINATION LOCK |
| AF | FRICTION LATCH |
| AG | HASP |
| DB | HASP STAPLE LOCK |
| AJ | KEY LOCK |
| MD | LOCK TAB |
| AH | LOOPED/TWISTED WIRE |
| AK | METAL STRAPS |
| AL | NAILS |
| AM | SCREWS |
| AN | SLIDE LATCH |
| KC | SNAP HOOK |
| DS | SNAP LOCK |
| AP | TURN LATCH |
| KD | WEBBING STRAPS W/BUCKLE |
AFPV*ACOMPARTMENT QUANTITY
THE NUMBER OF COMPARTMENTS FORMED BY PARTITIONS.
Enter the numeric reply with a minimum of one digit.
(AFPVA10*)
AFPT*JCOMPARTMENT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A COMPARTMENT,AT THE OPENING,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFPTJA2.0*;AFPTJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AFPU*JCOMPARTMENT WIDTH
A MEASUREMENT OF THE SHORTEST DIMENSION OF A COMPARTMENT,AT THE OPENING,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFPUJA2.0*;AFPUJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AFPW*DREINFORCEMENT METHOD
THE MEANS PROVIDED TO ADD STRENGTH AND/OR PROTECTION TO THE ITEM.
Enter the applicable reply code from the table below
(AFPWDAH*;AFPWDAE$DAD*;AFPWDAE$$DAD*)
| Table 1 |
| Reply Code (AE37) | Reply |
| AB | ANGLE IRON |
| AC | FULLY SHEATHED |
| AD | METAL CORNERS |
| AE | METAL PLATES |
| AF | METAL STRAPS |
| AG | METAL TRIM |
| AH | PARTIALLY SHEATHED |
| BG | TAPE, REINFORCED |
| AJ | WOOD CLEATS |
ABFF*DFURNISHED ITEMS
ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.
Enter the applicable reply code from the table below
(ABFFDFA*;ABFFDET$$DEY*)
| Table 1 |
| Reply Code (AB28) | Reply |
| ER | ALPHABETIC INDEXING SEPARATORS |
| ET | BOTTOM PAD |
| FC | CANTILEVER TRAY |
| EP | CARD COMPRESSOR |
| EU | COMPRESSION PAD |
| AMC | DOMESTIC LINER |
| EQ | LABEL HOLDER |
| ES | NUMERIC INDEXING SEPARATORS |
| EW | PLASTIC BAG |
| EX | PLASTIC BOTTLE |
| EY | REMOVABLE DIVIDERS |
| EZ | REMOVABLE FOAM CUSHION |
| FA | REMOVABLE LINER |
| FD | REMOVABLE TRAY |
| FB | SLEEVE |
| EV | TOP PAD |
MARK*GSPECIAL MARKINGS
MARKINGS INCLUDED ON AN ITEM FOR THE PURPOSE OF OFFERING INSTRUCTIONS OR WARNINGS OR TO INDICATE THE PURPOSE, FUNCTION, OR APPLICATION OF THE ITEM. EXCLUDES MANUFACTURER'S PART NUMBERS, SYMBOLS, OR THE LIKE.
Enter clear text.
(MARKGCLEARTEXT)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
IF STYLE/REPLY CODE(s) JK WERE ENTERED FOR MRC ENAC, YOU MUST ANSWER MRC (PPRM)
IF STYLE/REPLY CODE(s) MZ WERE ENTERED FOR MRC ENAC, YOU MUST ANSWER MRC (ALAX)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDJK*;ENACDNR$$DMZ*)
| Table 1 |
| Reply Code (EN02) | Reply |
| JK | COMPREHENSIVE PROCUREMENT GUIDELINE - PAPER AND PAPER PRODUCTS - PAPERBOARD AND PACKAGING PRODUCTS |
| NR | REVIEWED - DOES NOT MEET SOME ENAC CRITERIA |
| MZ | THERMAL SHIPPING CONTAINERS - DURABLE - BIOBASED |
ALAX*BBIOBASED CONTENT PERCENTAGE
THE STATED PERCENTAGE OF THE ITEM'S CONTENT THAT IS BIOBASED.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ALAXB2.0)
PPRM*BPOST-CONSUMER RECOVERED MATERIALS PERCENTAGE
THE PERCENTAGE OF THE POST-CONSUMER RECOVERED OR RECYCLED MATERIAL INCLUDED IN THE ITEM.
Enter a reply with a minimum of one digit on either side of the decimal point.
(PPRMB2.0)
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CSMX*JMAXIMUM WEIGHT CAPACITY
THE MAXIMUM WEIGHT THE ITEM IS DESIGNED TO SUPPORT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSMXJKG2.0*;CSMXJKG2.0$$JKG2.1*)
| Table 1 |
| Reply Code (AN75) | Reply |
| KG | KILOGRAMS |
| LB | POUNDS |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AEEDLQA000*;SFTT3AEEDLQA000$DPNA000*;SFTT3AEEDLQA000$$DPNA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AUC | INSIDE |
| 3AUW | OUTSIDE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| ENA000 | ENAMEL |
| LQA000 | LACQUER |
| PNA000 | PAINT |
| RSD000 | RESIN IONOMER |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AUC | INSIDE |
| 3AUW | OUTSIDE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
ALBY*DUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter the applicable reply code from the table below
(ALBYDAAD)
| Table 1 |
| Reply Code (AH21) | Reply |
| AAD | DOMESTIC |
| BUX | DOMESTIC/FIRE RETARDANT |
| AAL | OVERSEAS |
| AAM | WEATHER RESISTANT |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCM2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CM | CUBIC METERS |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information