A vertical member constructed of a rigid material, such as wood or metal. It is designed to form the lateral portion of a door frame in a frame type tent. Hardware and/or fastening devices are included.

FSC Information

8340	Tents and Tarpaulins

Colloquial Information

No Colloquials assigned to this Approve Item Name at this time

Change List

ISAC Reply 3AEE added to MRC MATT.

ISAC Reply 3BHO added to MRC MATT.

ISAC Reply 3HOU added to MRC MATT.

ISAC Reply 1A deleted from MRC MATT.

ISAC Reply 1B deleted from MRC MATT.

ISAC Reply 1C deleted from MRC MATT.

ISAC Reply 1D deleted from MRC MATT.

ISAC Reply 1E deleted from MRC MATT.

ISAC Reply 1F deleted from MRC MATT.

ISAC Reply 1G deleted from MRC MATT.

ISAC Reply 1H deleted from MRC MATT.

ISAC Reply 1J deleted from MRC MATT.

ISAC Reply 1K deleted from MRC MATT.

ISAC Reply 1L deleted from MRC MATT.

ISAC Reply 1X deleted from MRC MATT.

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED27701*)

AQJWDPOSITION DESIGNATION

A DESIGNATION WHICH SERVES TO IDENTIFY THE POSITION OF THE ITEM.

Enter the applicable reply code from the table below

(AQJWDABK*;AQJWDACD$DACB*)

Table 1
	Reply Code (AA38)	Reply
	ACB	BACK
	ACC	BOW ASSEMBLY
	ACD	FRONT
	ACE	INTERMEDIATE
	AAG	LEFT-HAND
	ACF	LEFT-HAND INTERMEDIATE
	ACG	LEFT-HAND LOWER
	ACH	LEFT-HAND STRAIGHT
	ABK	LOWER
	AAL	RIGHT-HAND
	ACJ	RIGHT-HAND INTERMEDIATE
	ACK	RIGHT-HAND STRAIGHT
	AAP	STRAIGHT
	ABL	UPPER
	ACL	UPRIGHT
	AAR	VERTICAL

MATTDMATERIAL

THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(MATT3BHODALA000*;MATT3BHODALA000$DMGA000*;MATT3BHODALA000$$DMGA000*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AEE	OVERALL
	3BHO	SHAFT
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (MA01)	Reply
	ALA000	ALUMINUM
	MGA000	MAGNESIUM

AQJNDTENT FOR WHICH DESIGNED

THE SPECIFIC TENT FOR WHICH THE ITEM IS DESIGNED.

Enter the applicable reply code from the table below

(AQJNDDJ*;AQJNDBF$DDF*;AQJNDBF$$DDF*)

Table 1
	Reply Code (AL02)	Reply
	AB	AERIAL CABLE SPLICERS
	BU	A-FRAME
	AC	AIR SUPPORTED
	AD	AIR SUPPORTED, DOUBLE WALL, VEHICLE MAINTENANCE, SMALL, ARCTIC
	DE	ALPINE HIGH COUNTRY CAMPER, FOUR-MAN
	BV	ALTERNATE SHELTER
	AF	ARCTIC SURVIVAL
	AE	ARCTIC, 10 MAN
	AG	ASSEMBLY, M1942
	AH	ASTRONOMICAL
	AJ	AVIATION MAINTENANCE, MEDIUM, DOUBLE WALL, AIR SUPPORTED/ANL-139
	DJ	CANOPY
	AK	CEMETERY CHAPEL FRAME
	AL	COMMAND POST
	CN	COMMAND POST, 1/4 TONTRAILER MTD
	CP	COMMAND POST, M-1945
	CW	COMMUNICATION CENTER COMPLEX
	AM	COMMUNICATION VEHICLE, M-151
	AN	CONSOLE, ASSAULT FIRE COMMAND, GUIDED MISSILE, AN/TSW-4
	AP	CONSOLE, ASSAULT FIRE CONTROL, HAWK MISSILE SYSTEM
	DA	CONSOLE, HIGH POWER ILLUMINATOR, HAWK MISSILE SYSTEM
	DB	CONSOLE, MAINTENANCE TEST SHOP, HAWK MISSILE SYSTEM
	DC	CONSOLE, PULSE ACQUISITION RADAR, HAWK MISSILE SYSTEM
	DD	CONSOLE, RANGE ONLY RADAR, CW ACQUISITION RADAR AND CW ILLUMINATOR, HAWK MISSILE SYSTEM
	AQ	CONSOLE, TRACK ANTENNA EQUIPMENT
	CU	DECONTAMINATION SHELTER
	AR	EXPANDABLE FRAME
	AS	EXPANSION ASSEMBLY
	DH	EXTENDABLE MODULAR
	AT	FRAME
	AW	FRAME, AIRCRAFT MAINTENANCE, A-IA
	AX	FRAME, AIRCRAFT MAINTENANCE, SMALL, TEMPERATE CLIMATE
	AY	FRAME, BALLOON INFLATION, M1957
	AZ	FRAME, EXPANDABLE, LIGHTWEIGHT
	BA	FRAME, EXTENDIBLE
	CQ	FRAME, INSULATED
	BB	FRAME, INSULATED, SECTIONAL
	BC	FRAME, MAINTENANCE, MEDIUM
	BD	FRAME, MAINTENANCE, MEDIUM, LIGHT METAL
	CR	FRAME, UNIVERSAL FIELD MAINTENANCE
	BE	FRAME, WALL, LIGHT METAL
	CV	GABLE SHELTER
	BF	GENERAL PURPOSE, LARGE
	DF	GENERAL PURPOSE, LARGE, LIGHTWEIGHT
	BG	GENERAL PURPOSE, MEDIUM
	BH	GENERAL PURPOSE, SMALL
	BJ	GENERAL PURPOSE, SMALL, LIGHTWEIGHT
	BK	GROUND, CABLE SPLICERS
	BL	HATCH
	BM	HATCH, SPLIT RIDGE, SEATTLE
	BN	HEXAGONAL, LIGHTWEIGHT, M-1950
	BP	KITCHEN, FLY PROOF, M-1948
	DG	LIGHTWEIGHT, PORTABLE
	BR	MAINTENANCE SHELTER
	BQ	MAINTENANCE, MEDIUM
	AU	MEDIUM SHELTER, VERSION 2
	BS	MOUNTAIN, TWO-MAN
	BT	NIKE HERCULES, AIR SUPPORTED
	BW	NIKE HERCULES, AIR SUPPORTED, DOUBLE WALL
	BX	OBSERVING, ASTRONOMIC, RECTANGULAR
	CY	OBSERVING, HEXAGONAL, GROUND
	BY	OBSERVING, TRIANGULATION, GROUND
	BZ	POLE SUPPORTED, LEAN-TO, REVERSIBLE
	CA	PONTOON BARGE
	CB	PYRAMIDAL
	CC	PYRAMIDAL, SURVIVAL, 3-4 MAN, SRU-I/P
	CD	RADOME, AIR SUPPORTED
	CE	RADOME, AIR SUPPORTED, SINGLE WALL, NIKE HERCULES SYSTEM
	CT	SECTIONAL ASSEMBLY, CIRCUS TYPE
	CS	SECTIONAL, HOSPITAL
	CF	SQUAD M-1942
	CX	SUNSHIELD, THEODOLITE
	CG	TENT ASSEMBLY
	AV	THREE SEASON PERSON
	CH	TRUNCATED, PYRAMIDAL, THEODOLITE PROTECTION
	CJ	UNIVERSAL FIELD MAINTENANCE, FRAME
	CK	WALL
	CL	WALL, LARGE
	CM	WALL, SMALL
	CZ	WEAPONS READY SERVICE SHELTER AND HANDLING SYSTEM

ABRYJLENGTH

A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABRYJFA2.0*;ABRYJFA2.0$$JFA2.1*)

Table 1
	Reply Code (AA05)	Reply
	F	FEET
	A	INCHES
	M	METERS
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABGL*JWIDTH

A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABGLJAB2.0*;ABGLJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABMZ*JDIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABMZJAA2.0*;ABMZJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABNM*JTHICKNESS

A MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABNMJAC2.0*;ABNMJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CBBL*DFEATURES PROVIDED

THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.

Enter the applicable reply code from the table below

(CBBLDAAJ)

Table 1
	Reply Code (AN47)	Reply
	ASQ	ADJUSTABLE
	BCW	ANGLE BRACKET ENDS
	BCX	DRUMS
	BCS	FEMALE ENDS
	BCJ	HINGED SEGMENTS
	BCM	HINGED TRANSOM
	BCK	HOBNAILS ON BOTTOM SURFACE
	BCN	INSULATED
	BCT	MALE ENDS
	AAJ	MOUNTING HARDWARE
	BCL	PLATE AND COVER FOR STOVEPIPE OUTLET
	BCR	SLOTTED
	DTE	STRAP FASTENER LOOPS
	BCQ	STUD
	BCP	THREADED INSERT

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

PGCD*APROCUREMENT GROUP CODE

A FIVE DIGIT NUMERIC CODE USED TO GROUP INDIVIDUAL SIZES OF A STANDARD GENERIC ITEM.

Enter the numeric reply with five digit(s) exactly.

(PGCDA11111)

SSEQ*ASIZE SEQUENCE INDICATOR

A THREE DIGIT NUMERIC CODE USED FOR SEQUENCING ITEMS IN ASCENDING SIZE ORDER FROM SMALLEST TO LARGEST SIZE. - MRC WAS CANCELED BECAUSE THE MRC DOES NOT MAKE SENSE, IT WAS NOT REPLACED AS NO ONE UNDERSTANDS THIS MRC AND WHAT THE CODED REPLIES EQUATE TO.

Enter the numeric reply with three digit(s) exactly.

(SSEQA111)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZW*GDEPARTURE FROM CITED DOCUMENT

THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.

Enter the reply in clear text.

(ZZZWGAS MODIFIED BY MATERIAL*)

ZZZX*GDEPARTURE FROM CITED DESIGNATOR

THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.

Enter the reply in clear text.

(ZZZXGAS MODIFIED BY MATERIAL*)

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION

A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.

Enter the Reply Code from the table below.

(ELCDDA*)

Table 1
	Reply Code (AN58)	Reply
	A	ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD

SUPP*GSUPPLEMENTARY FEATURES

CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.

Enter the reply in clear text.Separate multiple replies with a semicolon.

(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)

This MRC replaced MRC ZZZP

The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.

PDNB*APURCHASE DESCRIPTION IDENTIFICATION

THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.

Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.

(PDNBA81A37-30624A*)

ZZZV*GFSC APPLICATION DATA

THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.

Enter the name of the next higher classifiable assembly in clear text.

(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)

CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY

THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.

Enter the reply in clear text.

(CXCYGLINE PROCESSOR CONTROL BOARD*)

CLQL*GCOLLOQUIAL NAME

A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.

Enter the reply in clear text.

(CLQLGWOVEN WIRE CLOTH*)