A precision instrument designed to provide a constant velocity rotational movement. It may or may not have a self-contained power source. It is adapted to actuate mechanical time fuze(s), switch(es) and/or mechanical lever(s) and the like. It does not have a dial or case. Excludes:TIMER, INTERVAL and TIMER, STOP.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED22739*)
APPSDTIMER TYPE
INDICATES THE TYPE OF TIMER PROVIDED.
Enter the applicable reply code from the table below
(APPSDAF*;APPSDAG$DAE*)
| Table 1 |
| Reply Code (AK74) | Reply |
| A | ANY ACCEPTABLE |
| AE | ELECTRICAL |
| AF | ELECTROCHEMICAL |
| AG | MECHANICAL |
APHE*DOPERATION METHOD
THE MEANS USED TO OPERATE THE ITEM.
Enter the applicable reply code from the table below
(APHEDDX*;APHEDCG$DDG*)
| Table 1 |
| Reply Code (AC58) | Reply |
| A | ANY ACCEPTABLE |
| DF | CHRONOMETRIC MOTOR |
| DH | CHRONOMETRICALLY GOVERNED BY DC MOTOR |
| DG | CHRONOMETRICALLY GOVERNED MOTOR |
| DJ | CONSTANT SPEED MOTOR |
| DK | DC MOTOR |
| DL | ELECTROMAGNET |
| DP | ELECTRON OSCILLATOR OPERATED |
| DM | ELECTRONIC OPERATED |
| DN | ELECTROPLATING |
| DQ | GOVERNED MOTOR |
| CG | MOTOR DRIVEN |
| DS | MOTOR WITH ESCAPEMENT GOVERNOR |
| DT | PERMANENT MAGNETIC TYPE |
| DW | SPEED CONTROLLED MOTOR |
| DX | SYNCHRONOUS MOTOR |
ACDC*DCURRENT TYPE
INDICATES THE TYPE OF CURRENT WHETHER ALTERNATING,DIRECT,OR BOTH.
Enter the applicable reply code from the table below
(ACDCDC*;ACDCDB$$DB*)
| Table 1 |
| Reply Code (AB62) | Reply |
| B | AC |
| C | DC |
ELEC*BVOLTAGE IN VOLTS
THE TOTAL ELECTRICAL VOLTAGE.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ELECB2.0*;ELECB2.02.0$BM2.0*)
FREQ*BFREQUENCY IN HERTZ
THE CYCLES PER SECOND /HERTZ/ OF THE ALTERNATING CURRENT.
Enter a reply with a minimum of one digit on either side of the decimal point.
(FREQB2.0*;FREQB2.02.0$BM2.0*)
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC AQZD, YOU MUST ANSWER MRC (AFZE)
AQZD*DDC OPERATED CLUTCH
AN INDICATION OF WHETHER OR NOT A DIRECT CURRENT OPERATED CLUTCH IS INCLUDED. IF INCLUDED PLEASE USE MRC ABFF IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(AQZDDB)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
AFZE*BOPERATING DC VOLTAGE IN VOLTS
THE DIRECT CURRENT POTENTIAL WHICH MUST BE APPLIED TO AN ITEM TO OBTAIN ITS RATED PERFORMANCE,EXPRESSED IN VOLTS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AFZEB2.0*;AFZEB2.02.0$BM2.0*)
APZS*DRESET TYPE
INDICATES THE TYPE OF RESET PROVIDED.
Enter the applicable reply code from the table below
(APZSDCF*;APZSDA$$DCQ*)
| Table 1 |
| Reply Code (AC58) | Reply |
| A | ANY ACCEPTABLE |
| CQ | ELECTRIC |
| CF | MANUAL |
AQZF*DCONTROL TYPE
INDICATES THE TYPE OF CONTROL.
Enter the applicable reply code from the table below
(AQZFDAAY*;AQZFDA$DAAR*;AQZFDA$$DAAR*)
| Table 1 |
| Reply Code (AL37) | Reply |
| A | ANY ACCEPTABLE |
| AAB | AUTOMATIC |
| AAC | BINDING POST |
| AAD | BINDING POST SWITCH |
| AAE | ELECTRIC |
| AAF | ELECTRIC SWITCH |
| AAG | ELECTRONIC MECHANICAL |
| AAH | EXTERNAL |
| AAJ | EXTERNAL AUTOMATIC SWITCH |
| AAK | KNOB |
| AAM | KNOB INCLUDED POINTERS |
| AAL | KNOB SELECTOR |
| AAN | KNOB WITH RESET ON POWER FAILURE |
| AAP | LEVER |
| AAQ | MAGNETIC |
| AAR | MAKE-READY SWITCH |
| AAS | PENDANT SWITCH |
| AAT | PENDANT SWITCH START AND STOP SWITCH |
| AAW | PUSH BUTTON |
| AAX | RELAY |
| AAY | REMOTE |
| AAZ | REMOTE ELECTRICAL RESET |
| ABA | RESET |
| ABB | RESET BUTTON |
| ABC | RESET LEVER |
| ABD | START-STOP SWITCH |
| ABE | SWITCH |
| ABF | TIME SWITCH |
| ABG | TOGGLE SWITCH |
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC ARAE, YOU MUST ANSWER MRC (ARAF and ARAG and AEEA and ARAH)
ARAEDAUTOMATIC ELECTRIC CIRCUIT CONTROL SWITCH
AN INDICATION OF WHETHER OR NOT AN AUTOMATIC ELECTRIC CIRCUIT CONTROL SWITCH IS INCLUDED. IF INCLUDED PLEASE USE MRC ABFF IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(ARAEDC)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ARAF*BCONTROL SWITCH VOLTAGE IN VOLTS
THE TOTAL ELECTRICAL VOLTAGE IN VOLTS,OF THE CONTROL SWITCH.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ARAFB2.0*;ARAFB2.02.0$BM2.0*)
ARAG*JCURRENT RATING
THE AMOUNT OF CURRENT FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARAGJA2.0*;ARAGJA2.0$JA2.1*)
| Table 1 |
| Reply Code (AC30) | Reply |
| A | AMPERES |
| U | MICROAMPERES |
| L | MILLIAMPERES |
AEEA*DSWITCH TYPE
INDICATES THE TYPE OF SWITCH INCLUDED IN THE ITEM.
Enter the applicable reply code from the table below
(AEEADBX*;AEEADBM$DBP*;AEEADBM$$DBP*)
| Table 1 |
| Reply Code (AC82) | Reply |
| A | ANY ACCEPTABLE |
| BM | CAM ACTUATED |
| BN | OFF |
| BR | OFF AND RESET |
| BP | ON |
| BQ | ON-OFF |
| BS | QUICK MAKE QUICK BREAK |
| BT | REPEAT CYCLE |
| BX | SPECIAL AUTOMATIC CONTROL |
| BW | STOP-START |
| BY | TWO POSITION |
ARAH*DCONTROL SWITCH OUTLET TAP LOCATION
THE PHYSICAL LOCATION OF THE CONTROL SWITCH OUTLET TAP.
Enter the applicable reply code from the table below
(ARAHDAFC*;ARAHDAFG$DAFM*;ARAHDAFG$$DAFM*)
| Table 1 |
| Reply Code (AJ91) | Reply |
| A | ANY ACCEPTABLE |
| AFB | BACK OF CASE |
| AFC | BACK OF TIMER |
| AFD | IN CASE |
| AFW | ON 18 INCH COLOR CODED LEADS |
| AFE | ON CASE |
| AFF | ON CHASSIS |
| AFG | ON CONNECTOR |
| AFH | ON END OF CASE |
| AFJ | ON EXTENSION CORD |
| AFK | ON FRAME |
| AFL | ON HEADER |
| AFM | ON REAR OF CASE |
| AFP | ON SWITCH BODY |
| AFN | ON SWITCHES |
| AFQ | ON TERMINAL |
| AFR | ON TERMINAL BOARD |
| AFS | ON TIMER UNIT |
| AFT | ON TOP OF CASE |
| AFX | THRU CASE KNOCKOUT |
ARAJDINTERVAL EXPIRATION SIGNALLING DEVICE
AN INDICATION OF WHETHER OR NOT AN INTERVAL EXPRIATION SIGNALLING DEVICE IS INCLUDED. IF INCLUDED PLEASE USE MRC ABFF IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(ARAJDC)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ARCG*DDIAL BACKGROUND COLOR
THE HUE OR TINT OF THE DIAL BACKGROUND.
Enter the applicable reply code from the table below
(ARCGDWA0003*;ARCGDMS0077$DBE0000*;ARCGDMS0077$$DBE0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| AL0014 | ALUMINUM, NATURAL |
| AL0015 | ALUMINUM, SATIN |
| A | ANY ACCEPTABLE |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BL0002 | BLACK, BLUE |
| BL0037 | BLACK, EBONY |
| BL0033 | BLACK, FED STD 595, 37038 |
| BL0039 | BLACK, LUSTERLESS |
| BL0040 | BLACK, WRINKLE |
| BU0000 | BLUE |
| BU0005 | BLUE, DARK |
| BU0314 | BLUE, FED STD 595, 35177 |
| BU0083 | BLUE, FLUORESCENT |
| BU0100 | BLUE, POWDER |
| MS0012 | BRASS |
| MS0065 | BRONZE |
| MS0077 | BRONZE, DARK |
| BR0000 | BROWN |
| BR0010 | BROWN, DARK |
| MS0073 | CHROME |
| MS0078 | CHROME, SATIN |
| CL0000 | CLEAR |
| GL0000 | GOLD |
| GL0006 | GOLD, IRIDESCENT |
| GY0004 | GRAY, AIRCRAFT |
| GY0036 | GRAY, FED STD 595, 26492 |
| GY0002 | GRAY, LIGHT |
| GY0019 | GRAY, SILVER |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0020 | GREEN, DARK |
| GR0032 | GREEN, LIGHT |
| GR0078 | GREEN, LUMINESCENT |
| GR0079 | GREEN, MUNSELL |
| GR0093 | GREEN, PHOSPHORESCENT |
| VY0000 | IVORY |
| GR0076 | LEMON LIME |
| MS0035 | MAHOGANY |
| MA0000 | MAROON |
| NA0000 | NATURAL |
| NA0001 | NATURAL METALLIC |
| LD0000 | OLIVE DRAB |
| RG0000 | ORANGE |
| RG0003 | ORANGE, BLAZE |
| RE0000 | RED |
| RE0258 | RED, LUSTERLESS |
| MS0079 | SATIN-INVALID |
| SL0000 | SILVER |
| SL0008 | SILVER, LUSTERLESS |
| TA0000 | TAN |
| MS0083 | TRANSPARENT-INVALID |
| WA0000 | WALNUT |
| WA0003 | WALNUT, ROYAL |
| WH0000 | WHITE |
| WH0038 | WHITE METALLIC |
| WH0027 | WHITE, FED STD 595, 37875 |
| WH0024 | WHITE, FLUORESCENT |
| WH0032 | WHITE, LUMINOUS |
| WH0035 | WHITE, LUSTERLESS |
| WH0019 | WHITE, OPAQUE |
| WH0037 | WHITE, SILVER |
| YE0000 | YELLOW |
| YE0040 | YELLOW, FED STD 595, 33538 |
| YE0035 | YELLOW, FLUORESCENT |
ARCH*GDIAL SIZE
DESIGNATES THE SIZE OF THE RELATIVE OR PROPORTIONATE DIMENSIONS OF THE DIAL.
Enter clear text.
(ARCHGCLEARTEXT)
ARCE*GTIME INDICATOR TOTAL CAPACITY
THE TOTAL MEASURED CONTENT OF THE TIME INDICATOR.
Enter clear text.
(ARCEGCLEARTEXT)
ARCK*GDIAL MINIMUM GRADUATION
THE SMALLEST GRADUATION DISPLAYED ON THE DIAL. PLEASE USE MRC CNKX IN PLACE OF THIS DISCONTINUED MRC.
Enter clear text.
(ARCKGCLEARTEXT)
AETS*DINSCRIPTION COLOR
THE HUE OR TINT OF THE INSCRIPTION ON THE ITEM.
Enter the applicable reply code from the table below
(AETSDGR0079*;AETSDBR0010$DBL0039*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| AL0014 | ALUMINUM, NATURAL |
| AL0015 | ALUMINUM, SATIN |
| A | ANY ACCEPTABLE |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BL0002 | BLACK, BLUE |
| BL0037 | BLACK, EBONY |
| BL0033 | BLACK, FED STD 595, 37038 |
| BL0039 | BLACK, LUSTERLESS |
| BL0040 | BLACK, WRINKLE |
| BU0000 | BLUE |
| BU0005 | BLUE, DARK |
| BU0314 | BLUE, FED STD 595, 35177 |
| BU0083 | BLUE, FLUORESCENT |
| BU0100 | BLUE, POWDER |
| MS0012 | BRASS |
| MS0065 | BRONZE |
| MS0077 | BRONZE, DARK |
| BR0000 | BROWN |
| BR0010 | BROWN, DARK |
| MS0073 | CHROME |
| MS0078 | CHROME, SATIN |
| CL0000 | CLEAR |
| GL0000 | GOLD |
| GL0006 | GOLD, IRIDESCENT |
| GY0004 | GRAY, AIRCRAFT |
| GY0036 | GRAY, FED STD 595, 26492 |
| GY0002 | GRAY, LIGHT |
| GY0019 | GRAY, SILVER |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0020 | GREEN, DARK |
| GR0032 | GREEN, LIGHT |
| GR0078 | GREEN, LUMINESCENT |
| GR0079 | GREEN, MUNSELL |
| GR0093 | GREEN, PHOSPHORESCENT |
| VY0000 | IVORY |
| GR0076 | LEMON LIME |
| MS0035 | MAHOGANY |
| MA0000 | MAROON |
| NA0000 | NATURAL |
| NA0001 | NATURAL METALLIC |
| LD0000 | OLIVE DRAB |
| RG0000 | ORANGE |
| RG0003 | ORANGE, BLAZE |
| RE0000 | RED |
| RE0258 | RED, LUSTERLESS |
| MS0079 | SATIN-INVALID |
| SL0000 | SILVER |
| SL0008 | SILVER, LUSTERLESS |
| TA0000 | TAN |
| MS0083 | TRANSPARENT-INVALID |
| WA0000 | WALNUT |
| WA0003 | WALNUT, ROYAL |
| WH0000 | WHITE |
| WH0038 | WHITE METALLIC |
| WH0027 | WHITE, FED STD 595, 37875 |
| WH0024 | WHITE, FLUORESCENT |
| WH0032 | WHITE, LUMINOUS |
| WH0035 | WHITE, LUSTERLESS |
| WH0019 | WHITE, OPAQUE |
| WH0037 | WHITE, SILVER |
| YE0000 | YELLOW |
| YE0040 | YELLOW, FED STD 595, 33538 |
| YE0035 | YELLOW, FLUORESCENT |
AQPW*DLUMINOUS NUMERAL
AN INDICATION OF WHETHER OR NOT A LUMINOUS NUMERAL/S/ IS INCLUDED. IF INCLUDED PLEASE USE MRC ABFF IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(AQPWDC)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ARCL*JHAND DESIGNATION AND QUANTITY
THE DESIGNATION USED TO IDENTIFY THE HAND AND NUMBER PROVIDED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(ARCLJAAB2*;ARCLJAAB2$$JAAB3*)
| Table 1 |
| Reply Code (AL26) | Reply |
| AAB | ADJUSTABLE HAND |
| ABS | CONCENTRIC HAND |
| AAC | CYCLE PROCESS HAND |
| ABN | DEGREE HAND |
| ABM | ECCENTRIC HAND |
| ABP | ELAPSED TIME HAND |
| AAD | GREENWICH TIME HOUR HAND |
| AAE | HOUR HAND |
| AAF | HOUR TOTALIZING HAND |
| AAG | INDICATING HAND |
| AAH | INTERVAL HAND |
| AAJ | LOCAL TIME HOUR HAND |
| AAK | MINUTE HAND |
| AAL | MINUTE REGISTER HAND |
| AAM | MINUTE TOTALIZING HAND |
| AAR | PERCENTAGE TYPE HAND |
| AAN | POINTER |
| AAP | POINTER KNOB |
| AAQ | PROGRESS HAND |
| ABR | RECORDING HAND |
| AAS | REFERENCE HAND |
| AAT | SECOND HAND |
| AAY | SECOND INDICATOR HAND |
| AAZ | SECOND REGISTER |
| ABA | SECOND TOTALIZING HAND |
| AAW | SETTING HAND |
| AAX | STATIONARY HAND |
| ABB | STATIONARY SECOND HAND |
| ABC | SWEEP |
| ABD | SWEEP MINUTE HAND |
| ABE | SWEEP SECOND HAND |
| ABH | TIME INTERVAL SETTING HAND |
| ABJ | TIME RANGE ADJUST HAND |
| ABF | TIMING INDICATOR |
| ABG | TOTAL SET PERIOD |
| ABK | WIND INDICATOR HAND |
| ABT | WITHOUT HANDS |
AQRA*DHAND COLOR
THE HUE OR TINT OF THE HAND.
Enter the applicable reply code from the table below
(AQRADBL0039*;AQRADAL0015$DGR0000*;AQRADAL0015$$DGR0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| AL0014 | ALUMINUM, NATURAL |
| AL0015 | ALUMINUM, SATIN |
| A | ANY ACCEPTABLE |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BL0002 | BLACK, BLUE |
| BL0037 | BLACK, EBONY |
| BL0033 | BLACK, FED STD 595, 37038 |
| BL0039 | BLACK, LUSTERLESS |
| BL0040 | BLACK, WRINKLE |
| BU0000 | BLUE |
| BU0005 | BLUE, DARK |
| BU0314 | BLUE, FED STD 595, 35177 |
| BU0083 | BLUE, FLUORESCENT |
| BU0100 | BLUE, POWDER |
| MS0012 | BRASS |
| MS0065 | BRONZE |
| MS0077 | BRONZE, DARK |
| BR0000 | BROWN |
| BR0010 | BROWN, DARK |
| MS0073 | CHROME |
| MS0078 | CHROME, SATIN |
| CL0000 | CLEAR |
| GL0000 | GOLD |
| GL0006 | GOLD, IRIDESCENT |
| GY0004 | GRAY, AIRCRAFT |
| GY0036 | GRAY, FED STD 595, 26492 |
| GY0002 | GRAY, LIGHT |
| GY0019 | GRAY, SILVER |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0020 | GREEN, DARK |
| GR0032 | GREEN, LIGHT |
| GR0078 | GREEN, LUMINESCENT |
| GR0079 | GREEN, MUNSELL |
| GR0093 | GREEN, PHOSPHORESCENT |
| VY0000 | IVORY |
| GR0076 | LEMON LIME |
| MS0035 | MAHOGANY |
| MA0000 | MAROON |
| NA0000 | NATURAL |
| NA0001 | NATURAL METALLIC |
| LD0000 | OLIVE DRAB |
| RG0000 | ORANGE |
| RG0003 | ORANGE, BLAZE |
| RE0000 | RED |
| RE0258 | RED, LUSTERLESS |
| MS0079 | SATIN-INVALID |
| SL0000 | SILVER |
| SL0008 | SILVER, LUSTERLESS |
| TA0000 | TAN |
| MS0083 | TRANSPARENT-INVALID |
| WA0000 | WALNUT |
| WA0003 | WALNUT, ROYAL |
| WH0000 | WHITE |
| WH0038 | WHITE METALLIC |
| WH0027 | WHITE, FED STD 595, 37875 |
| WH0024 | WHITE, FLUORESCENT |
| WH0032 | WHITE, LUMINOUS |
| WH0035 | WHITE, LUSTERLESS |
| WH0019 | WHITE, OPAQUE |
| WH0037 | WHITE, SILVER |
| YE0000 | YELLOW |
| YE0040 | YELLOW, FED STD 595, 33538 |
| YE0035 | YELLOW, FLUORESCENT |
AQRB*DLUMINOUS HAND
AN INDICATION OF WHETHER OR NOT A LUMINOUS HAND IS INCLUDED. IF INCLUDED PLEASE USE MRC ABFF IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(AQRBDB)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ANXY*DILLUMINATED FEATURE
AN INDICATION OF WHETHER OR NOT AN ILLUMINATED FEATURE IS INCLUDED. IF INCLUDED PLEASE USE MRC ABFF IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(ANXYDC)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDSL0000*;HUESDYE0040$DBU0000*;HUESDYE0040$$DBU0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| AL0014 | ALUMINUM, NATURAL |
| AL0015 | ALUMINUM, SATIN |
| A | ANY ACCEPTABLE |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BL0002 | BLACK, BLUE |
| BL0037 | BLACK, EBONY |
| BL0033 | BLACK, FED STD 595, 37038 |
| BL0039 | BLACK, LUSTERLESS |
| BL0040 | BLACK, WRINKLE |
| BU0000 | BLUE |
| BU0005 | BLUE, DARK |
| BU0314 | BLUE, FED STD 595, 35177 |
| BU0083 | BLUE, FLUORESCENT |
| BU0100 | BLUE, POWDER |
| MS0012 | BRASS |
| MS0065 | BRONZE |
| MS0077 | BRONZE, DARK |
| BR0000 | BROWN |
| BR0010 | BROWN, DARK |
| MS0073 | CHROME |
| MS0078 | CHROME, SATIN |
| CL0000 | CLEAR |
| GL0000 | GOLD |
| GL0006 | GOLD, IRIDESCENT |
| GY0004 | GRAY, AIRCRAFT |
| GY0036 | GRAY, FED STD 595, 26492 |
| GY0002 | GRAY, LIGHT |
| GY0019 | GRAY, SILVER |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0020 | GREEN, DARK |
| GR0032 | GREEN, LIGHT |
| GR0078 | GREEN, LUMINESCENT |
| GR0079 | GREEN, MUNSELL |
| GR0093 | GREEN, PHOSPHORESCENT |
| VY0000 | IVORY |
| GR0076 | LEMON LIME |
| MS0035 | MAHOGANY |
| MA0000 | MAROON |
| NA0000 | NATURAL |
| NA0001 | NATURAL METALLIC |
| LD0000 | OLIVE DRAB |
| RG0000 | ORANGE |
| RG0003 | ORANGE, BLAZE |
| RE0000 | RED |
| RE0258 | RED, LUSTERLESS |
| MS0079 | SATIN-INVALID |
| SL0000 | SILVER |
| SL0008 | SILVER, LUSTERLESS |
| TA0000 | TAN |
| MS0083 | TRANSPARENT-INVALID |
| WA0000 | WALNUT |
| WA0003 | WALNUT, ROYAL |
| WH0000 | WHITE |
| WH0038 | WHITE METALLIC |
| WH0027 | WHITE, FED STD 595, 37875 |
| WH0024 | WHITE, FLUORESCENT |
| WH0032 | WHITE, LUMINOUS |
| WH0035 | WHITE, LUSTERLESS |
| WH0019 | WHITE, OPAQUE |
| WH0037 | WHITE, SILVER |
| YE0000 | YELLOW |
| YE0040 | YELLOW, FED STD 595, 33538 |
| YE0035 | YELLOW, FLUORESCENT |
ADJH*DMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM. PLEASE USE MRC AXGY IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(ADJHDRG*;ADJHDRK$DGU*;ADJHDRK$$DGU*)
| Table 1 |
| Reply Code (AB89) | Reply |
| A | ANY ACCEPTABLE |
| RA | BACK OF PANEL |
| DJ | BASE |
| PZ | BENCH |
| AB | BRACKET |
| CZ | BUSHING |
| JA | CHASSIS |
| RB | FACE MOUNTING |
| AF | FLANGE |
| RD | FLANGE TYPE FOR PANEL |
| GQ | FLUSH |
| RC | FLUSH PANEL |
| RE | FUSE CLIP HOLDER |
| KL | PANEL |
| HW | PLUG-IN |
| RF | PORTABLE CASE |
| LX | RACK |
| RG | RELAY BAR |
| RJ | SEMIFLUSH PANEL |
| LY | SHAFT |
| RH | SHELF |
| ABB | STRAP |
| DF | STUD |
| GU | SURFACE |
| EB | SUSPENSION |
| MG | TABLE |
| RK | WALL |
ARCRDINDEPENDENTLY OPERATED CLOCK
AN INDICATION OF WHETHER OR NOT AN INDEPENDENTLY OPERATED CLOCK IS INCLUDED. IF INCLUDED PLEASE USE MRC ABFF IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(ARCRDB)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
AKYN*GFURNISHED ITEMS AND QUANTITY
THE NAME AND NUMBER OF THOSE PARTS FURNISHED WITH THE ITEM OF SUPPLY THAT HAVE NOT BEEN SPECIFIED ELSEWHERE.
Enter clear text.
(AKYNGCLEARTEXT)
BFQN*DDISPLAY TYPE
INDICATES THE TYPE OF DISPLAY PROVIDED.
Enter the applicable reply code from the table below
(BFQNDFJX)
| Table 1 |
| Reply Code (AK54) | Reply |
| FJW | LIGHT EMITTING DIODE (L.E.D.). |
| FJX | LIQUID CRYSTAL |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAC2.0*;ADAVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABFY*JOVERALL DEPTH
AN OVERALL MEASUREMENT BETWEEN SPECIFIED POINTS OF AN ITEM,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABFYJAA2.0*;ABFYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
AWJN*JUNPACKAGED UNIT WEIGHT
THE MEASURED WEIGHT OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING MATERIAL. PLEASE USE MRC CTJS IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWJNJAN2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| BA | GRAMS |
| AJ | KILOGRAMS |
| AN | OUNCES |
| AS | POUNDS |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDAGA000*;PRMTDIRA000$DPTA000*;PRMTDIRA000$$DPTA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJRTA000E2.0*;PMWTJRTA000E2.0$JRTA000E2.0*;PMWTJRTA000E2.0$$JRTA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJRTA0002.0*;PMLCJRTA0002.0$JRTA0002.0*;PMLCJRTA0002.0$$JRTA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
PKQT*AINTERMEDIATE PACKAGE QUANTITY
THE NUMBER OF WRAPS,BOXES,OR BUNDLES,WHICH CONTAINS TWO OR MORE UNITS OF ISSUE,PLACED INSIDE AN EXTERIOR CONTAINER.
Enter the numeric reply with a minimum of one digit.
(PKQTA10*)
EXQT*AEXTERIOR CONTAINER QUANTITY
THE NUMBER OF UNITS OF ISSUE PLACED INSIDE THE EXTERIOR CONTAINER. PLEASE USE MRC NMBR WITH ISAC CODING OF OUTER CONTAINER IN PLACE OF THIS DISCONTINUED MRC.
Enter the numeric reply with a minimum of one digit.
(EXQTA10*)
SUWT*JUNIT OF ISSUE WEIGHT
THE MEASURED WEIGHT OF THE ACTUAL CONTAINER(S) OR SUPPORTING DEVICE(S) WHICH IS IN DIRECT CONTACT WITH THE ITEM AND ITS CONTENTS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(SUWTJLB2.0*)
| Table 1 |
| Reply Code (AN75) | Reply |
| KG | KILOGRAMS |
| LB | POUNDS |
ECWT*JEXTERIOR CONTAINER WEIGHT
THE MEASURED WEIGHT OF THE EXTERIOR CONTAINER. PLEASE USE MRC AJWK WITH ISAC CODING OF OUTER CONTAINER IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ECWTJLB2.0*)
| Table 1 |
| Reply Code (AN75) | Reply |
| KG | KILOGRAMS |
| LB | POUNDS |
SUCB*JUNIT OF ISSUE CUBE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF THE UNIT OF ISSUE AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(SUCBJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
EXME*JEXTERIOR CONTAINER CUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF THE EXTERIOR CONTAINER AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(EXMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information