NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED21844*)
ALBYDUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter the applicable reply code from the table below
(ALBYDBAM*;ALBYDBCE$DALD*;ALBYDBCE$$DALD*)
| Table 1 |
| Reply Code (AH21) | Reply |
| AKZ | BIOLOGY |
| ALA | CHEMISTRY |
| BCE | ENTOMOLOGY |
| BAM | GENERAL SURGERY |
| BNT | HISTOLOGICAL |
| ALB | METALLURGY |
| BNU | PATHOLOGICAL |
| ALC | PETROGRAPHY |
| ALD | SHOP |
| ALE | STEREOSCOPY |
| ALF | TOOL MAKING |
APGF*DDESIGN TYPE
INDICATES THE DESIGN TYPE OF THE ITEM.
Enter the applicable reply code from the table below
(APGFDAJE*;APGFDBMW$DAJE*)
| Table 1 |
| Reply Code (AK54) | Reply |
| AJE | GENERAL PURPOSE |
| BMW | RESEARCH MODEL |
BMLT*DNONSTEREOSCOPIC TYPE
INDICATES THE TYPE OF NONSTEREOSCOPIC UNIT PROVIDED.
Enter the applicable reply code from the table below
(BMLTDASL*;BMLTDASJ$$DASK*)
| Table 1 |
| Reply Code (AK95) | Reply |
| ASJ | BINOCULAR |
| ASK | MONOCULAR |
| ASL | TRINOCULAR |
BMLWDBODY TUBE POSITION
AN INDICATION OF THE POSITION OF THE BODY TUBE.
Enter the applicable reply code from the table below
(BMLWDCC*;BMLWDAB$$DCC*)
| Table 1 |
| Reply Code (AF63) | Reply |
| CC | INCLINED |
| AB | VERTICAL |
BMLX*DADJUSTABLE DRAWTUBE CALCULATION METHOD
THE MEANS PROVIDED FOR CALCULATION ON AN ADJUSTABLE DRAWTUBE.
Enter the applicable reply code from the table below
(BMLXDAKN)
| Table 1 |
| Reply Code (AJ12) | Reply |
| ADW | SCALE |
| AKN | SINGLE CALIBRATION |
BPTK*JSCALE MEASUREMENT
THE MEASUREMENT THE SCALE IS DESIGNED TO INDICATE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BPTKJAA2.0*;BPTKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BMLZDBODY TUBE INTERCHANGEABILITY FEATURE
AN INDICATION OF WHETHER OR NOT A FEATURE FOR INTERCHANGEABILITY OF BODY TUBES IS PROVIDED.
Enter the applicable reply code from the table below
(BMLZDC)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
BMMBDBODY TUBE ANALYZER
AN INDICATION OF WHETHER OR NOT A BODY TUBE ANALYZER IS INCLUDED.
Enter the applicable reply code from the table below
(BMMBDB)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BMMCDBODY TUBE BERTRAND LENS
AN INDICATION OF WHETHER OR NOT THE BODY TUBE IS PROVIDED WITH A BERTRAND LENS.
Enter the applicable reply code from the table below
(BMMCDC)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
BMMDDBODY TUBE ACCESSROY SLOT
AN INDICATION OF WHETHER OR NOT A BODY TUBE ACCESSORY SLOT IS PROVIDED.
Enter the applicable reply code from the table below
(BMMDDC)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
BMMF*DSTAGE SHAPE
THE PHYSICAL CONFIGURATION OF THE STAGE.
Enter the applicable reply code from the table below
(BMMFDCR)
| Table 1 |
| Reply Code (AD07) | Reply |
| CR | CIRCULAR |
| WK | IRREGULAR ELLIPSE |
| RT | RECTANGULAR |
| SQ | SQUARE |
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAB2.0*;ABRYJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJAA2.0*;ABGLJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMZ*JDIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMZJAA2.0*;ABMZJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BMMH*DSTAGE TYPE
INDICATES THE TYPE OF STAGE PROVIDED.
Enter the applicable reply code from the table below
(BMMHDBMY*;BMMHDAFF$$DBMY*)
| Table 1 |
| Reply Code (AK54) | Reply |
| BMY | MECHANICAL |
| AFF | REVOLVING |
BPFB*DSTAGE CALIBRATION FACILITY
AN INDICATION OF THE STAGE CALIBRATION FACILITY PROVIDED.
Enter the applicable reply code from the table below
(BPFBDAKP*;BPFBDAKQ$$DAKQ*)
| Table 1 |
| Reply Code (AJ12) | Reply |
| AKP | GRADUATED PERIPHERY |
| AKQ | GRADUATED SCALE |
BMMJ*DCENTERING FEATURE
AN INDICATION OF WHETHER OR NOT A CENTERING FEATURE IS PROVIDED.
Enter the applicable reply code from the table below
(BMMJDB)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
BPFT*DREMOVABLE PANEL COLOR
THE HUE OR TINT OF THE REMOVABLE PANEL.
Enter the applicable reply code from the table below
(BPFTDWH0000*;BPFTDBL0000$DCL0000*;BPFTDBL0000$$DCL0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| BL0000 | BLACK |
| CL0000 | CLEAR |
| WH0000 | WHITE |
BPFC*DSUBSTAGE CONDENSER DESIGN
THE DESIGN OF THE SUBSTAGE CONDENSER.
Enter the applicable reply code from the table below
(BPFCDDJ*;BPFCDDG$$DCW*)
| Table 1 |
| Reply Code (AM04) | Reply |
| DG | ABBE |
| CW | ACHROMATIC |
| DH | APLANATIC |
| DJ | BRIGHT FIELD |
| DK | DARK FIELD |
| DL | PETROGRAPHICAL |
| DM | VARIABLE FOCUS |
BPFD*DCONDENSER ADJUSTABILITY
AN INDICATION OF WHETHER OR NOT THE CONDENSER IS ADJUSTABLE.
Enter the applicable reply code from the table below
(BPFDDA)
| Table 1 |
| Reply Code (AB00) | Reply |
| A | ADJUSTABLE |
| C | NONADJUSTABLE |
BMTB*BNUMERIC APERTURE
AN INDICATION OF THE NUMERIC APERTURE OF THE ITEM.
Enter a reply with a minimum of one digit on either side of the decimal point.
(BMTBB2.0*;BMTBB2.0$$BM2.0*)
BPFF*DIRIS DIAPHRAGM TYPE
INDICATES THE TYPE OF IRIS DIAPHRAGM.
Enter the applicable reply code from the table below
(BPFFDBQH)
| Table 1 |
| Reply Code (AK54) | Reply |
| BQH | CENTERABLE |
| BQJ | NONCENTERABLE |
BPFG*DPOLARIZER
AN INDICATION OF WHETHER OR NOT A POLARIZER IS PROVIDED.
Enter the applicable reply code from the table below
(BPFGDC)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
BPFH*AMIRROR QUANTITY
THE NUMBER OF MIRROR(S) PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BPFHA10*)
BPFJ*DMIRROR SURFACE CONTOUR
THE PHYSICAL CONFIGURATION OF THE MIRROR FACE/S/.
Enter the applicable reply code from the table below
(BPFJDAH*;BPFJDXA$$DXB*)
| Table 1 |
| Reply Code (AD07) | Reply |
| AH | CONCAVE |
| XA | PLANE |
| XB | PLANO-CONCAVE |
BPFK*DNOSEPIECE DESIGN
THE DESIGN OF THE NOSEPIECE.
Enter the applicable reply code from the table below
(BPFKDBES*;BPFKDFWA$DBDH*)
| Table 1 |
| Reply Code (AK54) | Reply |
| BDH | DRUM |
| ANW | FIXED |
| FCD | QUADRUPLE |
| AFF | REVOLVING |
| FWA | REVOLVING QUADRUPLE |
| BES | SLIDING |
| BQL | TURRET |
BPFL*ANOSEPIECE PLACE QUANTITY
THE NUMBER OF PLACE(S) PROVIDED ON THE NOSEPIECE.
Enter the numeric reply with a minimum of one digit.
(BPFLA10*)
BPFM*AOBJECTIVE QUANTITY
THE NUMBER OF OBJECTIVE(S) PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BPFMA10*)
BLPR*JMAGNIFICATION
THE POWER AND/OR AMOUNT OF APPARENT ENLARGEMENT BY AN OPTICAL DEVICE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(BLPRJB2.0*;BLPRJB2.0$JB2.0*;BLPRJB2.0$$JB2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BPFN*ADIVISIBLE OBJECTIVE POWER EXCLUDING FRONT ELEMENT
THE DESIGNATION INDICATING THE AMOUNT OF APPARENT ENLARGEMENT BY A DIVISIBLE OBJECTIVE,EXCLUDING THE FRONT ELEMENT.
Enter the alpha-numeric reply with a minimum of one character.
(BPFNAP0)
BMTH*DOBJECTIVE TYPE
INDICATES THE TYPE OF OBJECTIVE PROVIDED.
Enter the applicable reply code from the table below
(BMTHDBNQ*;BMTHDBNP$$DADA*)
| Table 1 |
| Reply Code (AK54) | Reply |
| ADA | DRY |
| BNP | OIL IMMERSION |
| BNQ | WATER IMMERSION |
BLGP*DLENS TYPE
INDICATES THE TYPE OF LENS PROVIDED ON THE ITEM.
Enter the applicable reply code from the table below
(BLGPDCW*;BLGPDCY$$DEJ*)
| Table 1 |
| Reply Code (AM04) | Reply |
| CW | ACHROMATIC |
| CX | APOCHROMATIC |
| CY | FLUORITE |
| EJ | PLANOCHROMATIC |
BMSX*DLENS COATING FEATURE
AN INDICATION OF THE COATING FEATURE ON THE LENS.
Enter the applicable reply code from the table below
(BMSXDAG*;BMSXDAF$$DAG*)
| Table 1 |
| Reply Code (AG57) | Reply |
| AG | COATED |
| AF | UNCOATED |
BPFP*DFUNNEL STOP DESIGN FEATURE
AN INDICATION OF WHETHER OR NOT A FUNNEL STOP DESIGN FEATURE IS PROVIDED.
Enter the applicable reply code from the table below
(BPFPDC*;BPFPDB$$DB*)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
BPFQ*DOBJECTIVE IRIS DIAPHRAGM
AN INDICATION OF WHETHER OR NOT AN IRIS DIAPHRAGM IS PROVIDED ON THE OBJECTIVE.
Enter the applicable reply code from the table below
(BPFQDB*;BPFQDC$$DB*)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
BMSZ*DCOVER GLASS CORRECTION COLLAR
AN INDICATION OF WHETHER OR NOT A COVER GLASS CORRECTION COLLAR IS PROVIDED.
Enter the applicable reply code from the table below
(BMSZDB*;BMSZDC$$DB*)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
BPFW*AEYEPIECE QUANTITY
THE NUMBER OF EYEPIECE(S) PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BPFWA10*)
BPFX*DEYEPIECE DESIGNATOR
A DESIGNATION BY WHICH THE EYEPIECE IS COMMERCIALLY KNOWN AND/OR IDENTIFIED.
Enter the applicable reply code from the table below
(BPFXDBNG*;BPFXDBNE$$DBNF*)
| Table 1 |
| Reply Code (AK54) | Reply |
| BNE | HUYGENIAN |
| BNF | RAMSDEN |
| BNG | WIDE FIELD |
BPFY*AEYEPIECE MAGNIFICATION
A DESIGNATION INDICATING THE AMOUNT OF APPARENT ENLARGEMENT BY THE EYEPIECE.
Enter the alpha-numeric reply with a minimum of one character.
(BPFYAI1)
BMSR*DMOUNTED CROSS HAIRS
AN INDICATION OF WHETHER OR NOT MOUNTED CROSS HAIRS ARE PROVIDED.
Enter the applicable reply code from the table below
(BMSRDC*;BMSRDB$$DC*)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
BPFR*DMOUNTED MICROMETER SCALE
AN INDICATION OF WHETHER OR NOT A MOUNTED MICROMETER SCALE IS PROVIDED.
Enter the applicable reply code from the table below
(BPFRDB*;BPFRDC$$DB*)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
BMST*DDISC INSERT USAGE DESIGN
AN INDICATION OF WHETHER OR NOT THE ITEM DESIGN PROVIDES FOR USE OF DISC INSERTS.
Enter the applicable reply code from the table below
(BMSTDC*;BMSTDB$$DC*)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
BCTD*DFOCUSING TYPE
INDICATES THE TYPE OF FOCUSING PROVIDED.
Enter the applicable reply code from the table below
(BCTDDAKT*;BCTDDAKW$$DAKT*)
| Table 1 |
| Reply Code (AH21) | Reply |
| AKT | ADJUSTABLE |
| AKW | FIXED |
AKYD*GACCESSORY COMPONENTS AND QUANTITY
THE NAME AND NUMBER OF PARTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter clear text.
(AKYDGCLEARTEXT)
AFJUDCARRYING CASE
AN INDICATION OF WHETHER OR NOT A CONTAINER FROM WHICH THE ITEM IS COMPLETELY REMOVABLE IN NORMAL OPERABLE CONDITION IS PROVIDED. PLEASE USE MRC ABFF IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(AFJUDC)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
RADC*DRADIOACTIVE CONTENT
AN INDICATION OF WHETHER OR NOT THE ITEM CONTAINS RADIOACTIVE MATERIALS.
Enter the applicable reply code from the table below
(RADCDP)
| Table 1 |
| Reply Code (AN54) | Reply |
| P | CONTAINS RADIOACTIVE MATERIAL |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
ALCD*GUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter clear text.
(ALCDGCLEARTEXT)
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDAZA000*;PRMTDIRA000$$DAUA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJIRA000E2.0*;PMWTJIRA000E2.0$$JIRA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJPDA0002.0*;PMLCJPDA0002.0$$JPDA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
RADD*JRADIONUCLIDES DATA
THE NAME AND AMOUNT OF THE RADIONUCLIDE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(RADDJJFAALE2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| JF | CURIES |
| JH | MICROCURIES |
| JG | MILLICURIES |
| Table 2 |
| Reply Code (AN55) | Reply |
| AAKZ | THORIUM (90) TH-227 |
| AALA | THORIUM (90) TH-228 |
| AALB | THORIUM (90) TH-230 |
| AALC | THORIUM (90) TH-231 |
| AALD | THORIUM (90) TH-232 |
| AALE | THORIUM (90) TH-234 |
| AALF | THORIUM (90) TH-NATURAL |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
EXQT*AEXTERIOR CONTAINER QUANTITY
THE NUMBER OF UNITS OF ISSUE PLACED INSIDE THE EXTERIOR CONTAINER. PLEASE USE MRC NMBR WITH ISAC CODING OF OUTER CONTAINER IN PLACE OF THIS DISCONTINUED MRC.
Enter the numeric reply with a minimum of one digit.
(EXQTA10*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information