An adapter designed to connect a compressed gas cylinder valve outlet to a regulator, charging connection, or other mating part having a different connection for the same gas.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED21309*)
ACKMDFIRST END CONNECTION TYPE
A NARRATIVE DESCRIPTION OF THE TYPE OF END CONNECTION.
Enter the applicable reply code from the table below
(ACKMDAU)
| Table 1 |
| Reply Code (AB76) | Reply |
| AU | THREADED EXTERNAL GAS CYLINDER |
| AT | THREADED INTERNAL GAS CYLINDER |
ACKNLFIRST END STYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE END.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ACKNL43)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAJ1436 | 1 | DOUBLE COMPRESSION |
| AAJ1445 | 10 | SWIVEL NUT, GASKET SEAL |
| AAJ1446 | 11 | SWIVEL NUT, FLARED |
| AAJ1447 | 12 | SWIVEL NUT WITH COMPRESSION SLEEVE |
| AAJ1448 | 13 | SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE |
| AAJ1449 | 14 | GASKET SEAL |
| AAJ1450 | 15 | SWIVEL NUT, GASKET SEAL |
| AAJ1451 | 16 | SWIVEL NUT, GAS |
| AAJ1452 | 17 | SWIVEL NUT, FLARELESS CAP |
| AAJ1453 | 18 | SWIVEL NUT, COMPRESSION |
| AAJ1454 | 19 | SWIVEL NUT, FLARELESS |
| AAJ1437 | 2 | INVERTED FLARE |
| AAJ1455 | 20 | HIGH PRESSURE |
| AAJ1456 | 21 | UNTHREADED INTERNAL |
| AAJ1457 | 22 | UNTHREADED INTERNAL |
| AAJ1458 | 23 | STREAMLINED WITH TWO BRAZING RINGS |
| AAJ1459 | 24 | UNTHREADED INTERNAL |
| AAJ1460 | 25 | UNTHREADED INTERNAL |
| AAJ1461 | 26 | UNTHREADED INTERNAL |
| AAJ1462 | 27 | UNTHREADED INTERNAL |
| AAJ1463 | 28 | UNTHREADED INTERNAL |
| AAJ1464 | 29 | UNTHREADED INTERNAL |
| AAJ1438 | 3 | GASKET SEAL |
| AAJ1465 | 30 | UNTHREADED INTERNAL |
| AAJ1466 | 31 | UNTHREADED INTERNAL |
| AAJ1467 | 32 | UNTHREADED INTERNAL |
| AAJ1468 | 33 | UNTHREADED INTERNAL |
| AAJ1469 | 34 | UNTHREADED INTERNAL |
| AAJ1470 | 35 | UNTHREADED INTERNAL |
| AAJ1471 | 36 | UNTHREADED INTERNAL |
| AAJ1472 | 37 | INVERTED FLARE |
| AAJ1473 | 38 | PLAIN |
| AAJ1474 | 39 | COMPRESSION |
| AAJ1439 | 4 | PLAIN |
| AAJ1475 | 40 | HOSE GRIPPING NIPPLE |
| AAJ1476 | 41 | HOSE GRIPPING |
| AAJ1477 | 42 | HOSE OR PLASTIC TUBING GRIPPING |
| AAJ1478 | 43 | FLARED |
| AAJ1479 | 44 | SOLID PLUG |
| AAJ1480 | 45 | EXTERNAL SEAT OR GASKET SEAL |
| AAJ1481 | 46 | FLARELESS |
| AAJ1482 | 47 | SWIVEL NUT INVERTED FLARE |
| AAJ1483 | 48 | SWIVEL, PLAIN |
| AAJ1484 | 49 | SWIVEL NUT DOUBLE COMPRESSION |
| AAJ1440 | 5 | SWIVEL NUT, FLARE |
| AAJ1485 | 50 | GASKET SEAL |
| AAJ1486 | 51 | SWIVEL NUT, FLARED |
| AAJ1487 | 52 | DOUBLE THREADED SECTION BOSS FITTING GASKET WITH LOCK NUT SEALING |
| AAJ1488 | 53 | GASKET SEAL COMPRESSION |
| AAJ1489 | 54 | SWIVEL NUT, HOSE GRIPPING NIPPLE |
| AAJ1490 | 55 | SWIVEL NUT WITH INTERNALLY THREADED SLEEVE AND FLARE TUBE |
| AAJ1491 | 56 | UNTHREADED EXTERNAL |
| AAJ1492 | 57 | BARBED OR SERRATED END |
| AAJ1493 | 58 | UNTHREADED EXTERNAL |
| AAJ1494 | 59 | UNTHREADED EXTERNAL |
| AAJ1441 | 6 | SWIVEL NUT, GASKET SEAL |
| AAJ1495 | 60 | UNTHREADED EXTERNAL |
| AAJ1496 | 61 | UNTHREADED EXTERNAL |
| AAJ1497 | 62 | UNTHREADED EXTERNAL |
| AAJ1498 | 63 | UNTHREADED EXTERNAL |
| AAJ1499 | 64 | THREADED |
| AAJ1500 | 65 | THREADED |
| AAJ1501 | 66 | THREADED |
| AAJ1502 | 67 | THREADED |
| AAJ1503 | 68 | THREADED |
| AAJ1504 | 69 | RECESSED |
| AAJ1442 | 7 | FLARE |
| AAJ1505 | 70 | RAISED |
| AAJ1506 | 71 | PLAIN |
| AAJ1507 | 72 | RECESSED |
| AAJ1508 | 73 | RAISED |
| AAJ1509 | 74 | RECESSED |
| AAJ1510 | 75 | RAISED |
| AAJ1511 | 76 | PLAIN |
| AAJ1512 | 77 | PLAIN |
| AAJ1513 | 78 | PLAIN |
| AAJ1514 | 79 | BUTT WELD |
| AAJ1443 | 8 | SWIVEL NUT, INVERTED FLARE |
| AAJ1515 | 80 | BUTT WELD |
| AAJ1516 | 81 | BUTT WELD |
| AAJ1444 | 9 | DRAINAGE |
AQSQAFIRST END THREAD SIZE
DESIGNATES THE THREAD DIAMETER AND NUMBER OF THREADS PER INCH OF THE FIRST END.
Enter the alpha-numeric reply with a minimum of one character.
(AQSQAM0)
AQSRDFIRST END THREAD SERIES/TYPE DESIGNATOR
DESIGNATES THE SERIES/TYPE OF THE THREADS OF THE FIRST END.
Enter the applicable reply code from the table below
(AQSRDAQ)
| Table 1 |
| Reply Code (AH06) | Reply |
| AS | AMERICAN STANDARD |
| AN | ANPT |
| AD | INTERNATIONAL SPECIAL |
| AR | INTERNATIONAL STANDARD |
| AE | IPS |
| SM | ISO M |
| SS | ISO S |
| NG | NGO |
| GT | NGT |
| AF | NGTD |
| AH | NGTI |
| AJ | NGTP |
| NN | NONSTANDARD |
| SC | NPSC |
| AK | NPSN |
| NP | NPT |
| AL | NPTA |
| NT | NPTF |
| AQ | NS |
| AT | TWPP |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNJ |
| JC | UNJC |
| JE | UNJEF |
| JF | UNJF |
ACLLDFIRST END THREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable reply code from the table below
(ACLLDR)
| Table 1 |
| Reply Code (AA38) | Reply |
| L | LEFT-HAND |
| R | RIGHT-HAND |
AQSWDUNION END
AN INDICATION OF WHETHER OR NOT A UNION END IS INCLUDED.
Enter the applicable reply code from the table below
(AQSWDC)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
AQSXDWRENCHING FACILITY
AN INDICATION OF WHETHER OR NOT A WRENCHING FACILITY IS INCLUDED.
Enter the applicable reply code from the table below
(AQSXDC)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ABHPJOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDCUB000*;MATTDCU0091$DALA000*;MATTDCU0091$$DALA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| CUB000 | COPPER ALLOY |
| CU0079 | COPPER ALLOY 260 |
| CU0081 | COPPER ALLOY 270 |
| CU0091 | COPPER ALLOY 360 |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDCRA000*;SFTTDNLA000$DCRA000*;SFTTDNLA000$$DCRA000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| CRA000 | CHROMIUM |
| NLA000 | NICKEL |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
ACLN*JFIRST END REDUCED PASSAGE INSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE FIRST END REDUCED PASSAGE,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACLNJAB2.0*;ACLNJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ACLS*DSECOND END CONNECTION TYPE
A NARRATIVE DESCRIPTION OF THE TYPE OF END CONNECTION.
Enter the applicable reply code from the table below
(ACLSDAT)
| Table 1 |
| Reply Code (AB76) | Reply |
| AU | THREADED EXTERNAL GAS CYLINDER |
| AT | THREADED INTERNAL GAS CYLINDER |
ACLT*LSECOND END STYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE END.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ACLTL51)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAJ1436 | 1 | DOUBLE COMPRESSION |
| AAJ1445 | 10 | SWIVEL NUT, GASKET SEAL |
| AAJ1446 | 11 | SWIVEL NUT, FLARED |
| AAJ1447 | 12 | SWIVEL NUT WITH COMPRESSION SLEEVE |
| AAJ1448 | 13 | SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE |
| AAJ1449 | 14 | GASKET SEAL |
| AAJ1450 | 15 | SWIVEL NUT, GASKET SEAL |
| AAJ1451 | 16 | SWIVEL NUT, GAS |
| AAJ1452 | 17 | SWIVEL NUT, FLARELESS CAP |
| AAJ1453 | 18 | SWIVEL NUT, COMPRESSION |
| AAJ1454 | 19 | SWIVEL NUT, FLARELESS |
| AAJ1437 | 2 | INVERTED FLARE |
| AAJ1455 | 20 | HIGH PRESSURE |
| AAJ1456 | 21 | UNTHREADED INTERNAL |
| AAJ1457 | 22 | UNTHREADED INTERNAL |
| AAJ1458 | 23 | STREAMLINED WITH TWO BRAZING RINGS |
| AAJ1459 | 24 | UNTHREADED INTERNAL |
| AAJ1460 | 25 | UNTHREADED INTERNAL |
| AAJ1461 | 26 | UNTHREADED INTERNAL |
| AAJ1462 | 27 | UNTHREADED INTERNAL |
| AAJ1463 | 28 | UNTHREADED INTERNAL |
| AAJ1464 | 29 | UNTHREADED INTERNAL |
| AAJ1438 | 3 | GASKET SEAL |
| AAJ1465 | 30 | UNTHREADED INTERNAL |
| AAJ1466 | 31 | UNTHREADED INTERNAL |
| AAJ1467 | 32 | UNTHREADED INTERNAL |
| AAJ1468 | 33 | UNTHREADED INTERNAL |
| AAJ1469 | 34 | UNTHREADED INTERNAL |
| AAJ1470 | 35 | UNTHREADED INTERNAL |
| AAJ1471 | 36 | UNTHREADED INTERNAL |
| AAJ1472 | 37 | INVERTED FLARE |
| AAJ1473 | 38 | PLAIN |
| AAJ1474 | 39 | COMPRESSION |
| AAJ1439 | 4 | PLAIN |
| AAJ1475 | 40 | HOSE GRIPPING NIPPLE |
| AAJ1476 | 41 | HOSE GRIPPING |
| AAJ1477 | 42 | HOSE OR PLASTIC TUBING GRIPPING |
| AAJ1478 | 43 | FLARED |
| AAJ1479 | 44 | SOLID PLUG |
| AAJ1480 | 45 | EXTERNAL SEAT OR GASKET SEAL |
| AAJ1481 | 46 | FLARELESS |
| AAJ1482 | 47 | SWIVEL NUT INVERTED FLARE |
| AAJ1483 | 48 | SWIVEL, PLAIN |
| AAJ1484 | 49 | SWIVEL NUT DOUBLE COMPRESSION |
| AAJ1440 | 5 | SWIVEL NUT, FLARE |
| AAJ1485 | 50 | GASKET SEAL |
| AAJ1486 | 51 | SWIVEL NUT, FLARED |
| AAJ1487 | 52 | DOUBLE THREADED SECTION BOSS FITTING GASKET WITH LOCK NUT SEALING |
| AAJ1488 | 53 | GASKET SEAL COMPRESSION |
| AAJ1489 | 54 | SWIVEL NUT, HOSE GRIPPING NIPPLE |
| AAJ1490 | 55 | SWIVEL NUT WITH INTERNALLY THREADED SLEEVE AND FLARE TUBE |
| AAJ1491 | 56 | UNTHREADED EXTERNAL |
| AAJ1492 | 57 | BARBED OR SERRATED END |
| AAJ1493 | 58 | UNTHREADED EXTERNAL |
| AAJ1494 | 59 | UNTHREADED EXTERNAL |
| AAJ1441 | 6 | SWIVEL NUT, GASKET SEAL |
| AAJ1495 | 60 | UNTHREADED EXTERNAL |
| AAJ1496 | 61 | UNTHREADED EXTERNAL |
| AAJ1497 | 62 | UNTHREADED EXTERNAL |
| AAJ1498 | 63 | UNTHREADED EXTERNAL |
| AAJ1499 | 64 | THREADED |
| AAJ1500 | 65 | THREADED |
| AAJ1501 | 66 | THREADED |
| AAJ1502 | 67 | THREADED |
| AAJ1503 | 68 | THREADED |
| AAJ1504 | 69 | RECESSED |
| AAJ1442 | 7 | FLARE |
| AAJ1505 | 70 | RAISED |
| AAJ1506 | 71 | PLAIN |
| AAJ1507 | 72 | RECESSED |
| AAJ1508 | 73 | RAISED |
| AAJ1509 | 74 | RECESSED |
| AAJ1510 | 75 | RAISED |
| AAJ1511 | 76 | PLAIN |
| AAJ1512 | 77 | PLAIN |
| AAJ1513 | 78 | PLAIN |
| AAJ1514 | 79 | BUTT WELD |
| AAJ1443 | 8 | SWIVEL NUT, INVERTED FLARE |
| AAJ1515 | 80 | BUTT WELD |
| AAJ1516 | 81 | BUTT WELD |
| AAJ1444 | 9 | DRAINAGE |
AQSS*ASECOND END THREAD SIZE
DESIGNATES THE THREAD DIAMETER AND NUMBER OF THREADS PER INCH OF THE SECOND END.
Enter the alpha-numeric reply with a minimum of one character.
(AQSSAJ2)
AQST*DSECOND END THREAD SERIES/TYPE DESIGNATOR
DESIGNATES THE SERIES/TYPE OF THE THREADS OF THE SECOND END.
Enter the applicable reply code from the table below
(AQSTDAY)
| Table 1 |
| Reply Code (AH06) | Reply |
| AS | AMERICAN STANDARD |
| AN | ANPT |
| AD | INTERNATIONAL SPECIAL |
| AR | INTERNATIONAL STANDARD |
| AE | IPS |
| SM | ISO M |
| SS | ISO S |
| NG | NGO |
| GT | NGT |
| AF | NGTD |
| AH | NGTI |
| AJ | NGTP |
| NN | NONSTANDARD |
| SC | NPSC |
| AK | NPSN |
| NP | NPT |
| AL | NPTA |
| NT | NPTF |
| AQ | NS |
| SW | SAE |
| AY | SPECIAL |
| AT | TWPP |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNJ |
| JC | UNJC |
| JE | UNJEF |
| JF | UNJF |
ACMS*DSECOND END THREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable reply code from the table below
(ACMSDR)
| Table 1 |
| Reply Code (AA38) | Reply |
| L | LEFT-HAND |
| R | RIGHT-HAND |
ACMU*JSECOND END REDUCED PASSAGE INSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE SECOND END REDUCED PASSAGE,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACMUJAC2.0*;ACMUJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ACSL*DWRENCHING FACILITY SHAPE
THE PHYSICAL CONFIGURATION OF THE FACILITY UTILIZED TO ASSEMBLE OR DISASSEMBLE THE ITEM.
Enter the applicable reply code from the table below
(ACSLDHE)
| Table 1 |
| Reply Code (AD07) | Reply |
| BH | ANGULAR |
| HE | HEXAGONAL |
| SQ | SQUARE |
ADVR*BANGLE IN DEG
THE ANGLE FORMED BY THE ANGULAR PORTION OF THE ITEM,EXPRESSED IN DEGREES. PLEASE USE MRC CSXS IN PLACE OF THIS DISCONTINUED MRC.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ADVRB2.0)
AGUD*DSUPPLY PACKAGE TYPE
INDICATES THE TYPE OF PACKAGE IN WHICH THE INTERMEDIATE PACKAGES ARE CONTAINED. PLEASE USE MRC CQCT.
Enter the applicable reply code from the table below
(AGUDDAB)
| Table 1 |
| Reply Code (AE96) | Reply |
| AB | BOX |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAS8)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAT7)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CZHT*ARELATED GASES/CYLINDERS NATIONAL STOCK NUMBER
THE NATIONAL STOCK NUMBER DESIGNATION OF FILLED OR RELATED GASES OR CYLINDERS IN THE SUPPLY SYSTEM.
Enter the NSN.
(CZHTA6830-00-000-0000*; CZHTA6830-00-000-0000$$A6830-01-000-0000*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
AAXK*DGAS FOR WHICH DESIGNED
THE MEDIA THE MACHINE IS DESIGNED TO COMPRESS.
Enter the applicable reply code from the table below
(AAXKDALK*;AAXKDANZ$DAAE*;AAXKDANZ$$DAAE*)
| Table 1 |
| Reply Code (AB75) | Reply |
| ANC | ACETYLENE |
| AAB | AIR |
| AEJ | ARGON |
| AGU | BROMOTRIFLUOROMETHANE |
| AAG | CARBON DIOXIDE |
| ALJ | COMPRESSED AIR |
| ALK | COMPRESSED GAS |
| AAL | HELIUM |
| AAP | NITROGEN |
| ANZ | NITROUS OXYGEN |
| AAQ | OXYGEN |
| APC | PROPANE, LIQUID |
| AAE | REFRIGERANT |
| ABA | SULPHUR HEXAFLUORIDE |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information