A quantity of ROLL, ROLLER TUBE EXPANDER of the size and type required for a specified CAGE ASSEMBLY, ROLLER TUBE EXPANDER.
ISAC Reply 3AEE added to MRC ATBH.
ISAC Reply 3EDJ added to MRC ATBH.
ISAC Reply 3EDK added to MRC ATBH.
ISAC Reply 3EDL added to MRC ATBH.
ISAC Reply 3EDM added to MRC ATBH.
ISAC Reply 3EGG added to MRC ATBH.
ISAC Reply 3HOU added to MRC ATBH.
ISAC Reply 1A deleted from MRC ATBH.
ISAC Reply 1B deleted from MRC ATBH.
ISAC Reply 1C deleted from MRC ATBH.
ISAC Reply 1D deleted from MRC ATBH.
ISAC Reply 1E deleted from MRC ATBH.
ISAC Reply 1F deleted from MRC ATBH.
ISAC Reply 1G deleted from MRC ATBH.
ISAC Reply 1H deleted from MRC ATBH.
ISAC Reply 1J deleted from MRC ATBH.
ISAC Reply 1K deleted from MRC ATBH.
ISAC Reply 1L deleted from MRC ATBH.
ISAC Reply 1Z deleted from MRC ATBH.
ISAC Reply 3AEE added to MRC AJUW.
ISAC Reply 3EDJ added to MRC AJUW.
ISAC Reply 3EDK added to MRC AJUW.
ISAC Reply 3EDL added to MRC AJUW.
ISAC Reply 3EGG added to MRC AJUW.
ISAC Reply 3HOU added to MRC AJUW.
ISAC Reply 1A deleted from MRC AJUW.
ISAC Reply 1B deleted from MRC AJUW.
ISAC Reply 1C deleted from MRC AJUW.
ISAC Reply 1D deleted from MRC AJUW.
ISAC Reply 1E deleted from MRC AJUW.
ISAC Reply 1F deleted from MRC AJUW.
ISAC Reply 1G deleted from MRC AJUW.
ISAC Reply 1H deleted from MRC AJUW.
ISAC Reply 1J deleted from MRC AJUW.
ISAC Reply 1K deleted from MRC AJUW.
ISAC Reply 1L deleted from MRC AJUW.
ISAC Reply 1Z deleted from MRC AJUW.
ISAC Reply 3AEE added to MRC AGAH.
ISAC Reply 3EDJ added to MRC AGAH.
ISAC Reply 3EDK added to MRC AGAH.
ISAC Reply 3EDL added to MRC AGAH.
ISAC Reply 3HOU added to MRC AGAH.
ISAC Reply 1A deleted from MRC AGAH.
ISAC Reply 1B deleted from MRC AGAH.
ISAC Reply 1C deleted from MRC AGAH.
ISAC Reply 1D deleted from MRC AGAH.
ISAC Reply 1E deleted from MRC AGAH.
ISAC Reply 1F deleted from MRC AGAH.
ISAC Reply 1G deleted from MRC AGAH.
ISAC Reply 1H deleted from MRC AGAH.
ISAC Reply 1J deleted from MRC AGAH.
ISAC Reply 1K deleted from MRC AGAH.
ISAC Reply 1L deleted from MRC AGAH.
ISAC Reply 1Z deleted from MRC AGAH.
ISAC Reply 3AEE added to MRC AMDL.
ISAC Reply 3EDJ added to MRC AMDL.
ISAC Reply 3EDK added to MRC AMDL.
ISAC Reply 3EDL added to MRC AMDL.
ISAC Reply 3HOU added to MRC AMDL.
ISAC Reply 1A deleted from MRC AMDL.
ISAC Reply 1B deleted from MRC AMDL.
ISAC Reply 1C deleted from MRC AMDL.
ISAC Reply 1D deleted from MRC AMDL.
ISAC Reply 1E deleted from MRC AMDL.
ISAC Reply 1F deleted from MRC AMDL.
ISAC Reply 1G deleted from MRC AMDL.
ISAC Reply 1H deleted from MRC AMDL.
ISAC Reply 1J deleted from MRC AMDL.
ISAC Reply 1K deleted from MRC AMDL.
ISAC Reply 1L deleted from MRC AMDL.
ISAC Reply 1Z deleted from MRC AMDL.
ISAC Reply 3AEE added to MRC AMFZ.
ISAC Reply 3EDJ added to MRC AMFZ.
ISAC Reply 3EDK added to MRC AMFZ.
ISAC Reply 3EDL added to MRC AMFZ.
ISAC Reply 3HOU added to MRC AMFZ.
ISAC Reply 1A deleted from MRC AMFZ.
ISAC Reply 1B deleted from MRC AMFZ.
ISAC Reply 1C deleted from MRC AMFZ.
ISAC Reply 1D deleted from MRC AMFZ.
ISAC Reply 1E deleted from MRC AMFZ.
ISAC Reply 1F deleted from MRC AMFZ.
ISAC Reply 1G deleted from MRC AMFZ.
ISAC Reply 1H deleted from MRC AMFZ.
ISAC Reply 1J deleted from MRC AMFZ.
ISAC Reply 1K deleted from MRC AMFZ.
ISAC Reply 1L deleted from MRC AMFZ.
ISAC Reply 1Z deleted from MRC AMFZ.
ISAC Reply 3AEE added to MRC AMCS.
ISAC Reply 3EDJ added to MRC AMCS.
ISAC Reply 3EDK added to MRC AMCS.
ISAC Reply 3EDL added to MRC AMCS.
ISAC Reply 3HOU added to MRC AMCS.
ISAC Reply 1A deleted from MRC AMCS.
ISAC Reply 1B deleted from MRC AMCS.
ISAC Reply 1C deleted from MRC AMCS.
ISAC Reply 1D deleted from MRC AMCS.
ISAC Reply 1E deleted from MRC AMCS.
ISAC Reply 1F deleted from MRC AMCS.
ISAC Reply 1G deleted from MRC AMCS.
ISAC Reply 1H deleted from MRC AMCS.
ISAC Reply 1J deleted from MRC AMCS.
ISAC Reply 1K deleted from MRC AMCS.
ISAC Reply 1L deleted from MRC AMCS.
ISAC Reply 1Z deleted from MRC AMCS.
ISAC Reply 3AEE added to MRC AAHE.
ISAC Reply 3ALI added to MRC AAHE.
ISAC Reply 3HOU added to MRC AAHE.
ISAC Reply 1A deleted from MRC AAHE.
ISAC Reply 1B deleted from MRC AAHE.
ISAC Reply 1C deleted from MRC AAHE.
ISAC Reply 1D deleted from MRC AAHE.
ISAC Reply 1E deleted from MRC AAHE.
ISAC Reply 1F deleted from MRC AAHE.
ISAC Reply 1F deleted from MRC CQBH.
ISAC Reply 1G deleted from MRC CQBH.
ISAC Reply 1H deleted from MRC CQBH.
ISAC Reply 1J deleted from MRC CQBH.
ISAC Reply 1K deleted from MRC CQBH.
ISAC Reply 1L deleted from MRC CQBH.
ISAC Reply 3AEE added to MRC BPNY.
ISAC Reply 3EDL added to MRC BPNY.
ISAC Reply 3HOU added to MRC BPNY.
ISAC Reply 1A deleted from MRC BPNY.
ISAC Reply 1B deleted from MRC BPNY.
ISAC Reply 1C deleted from MRC BPNY.
ISAC Reply 1D deleted from MRC BPNY.
ISAC Reply 1E deleted from MRC BPNY.
ISAC Reply 1F deleted from MRC BPNY.
ISAC Reply 1G deleted from MRC BPNY.
ISAC Reply 1H deleted from MRC BPNY.
ISAC Reply 1J deleted from MRC BPNY.
ISAC Reply 1K deleted from MRC BPNY.
ISAC Reply 1L deleted from MRC BPNY.
ISAC Reply 1Z deleted from MRC BPNY.
ISAC Reply 3AEE added to MRC AMFM.
ISAC Reply 3EDJ added to MRC AMFM.
ISAC Reply 3EDK added to MRC AMFM.
ISAC Reply 3HOU added to MRC AMFM.
ISAC Reply 1A deleted from MRC AMFM.
ISAC Reply 1B deleted from MRC AMFM.
ISAC Reply 1C deleted from MRC AMFM.
ISAC Reply 1D deleted from MRC AMFM.
ISAC Reply 1E deleted from MRC AMFM.
ISAC Reply 1F deleted from MRC AMFM.
ISAC Reply 1G deleted from MRC AMFM.
ISAC Reply 1H deleted from MRC AMFM.
ISAC Reply 1J deleted from MRC AMFM.
ISAC Reply 1K deleted from MRC AMFM.
ISAC Reply 1L deleted from MRC AMFM.
ISAC Reply 1Z deleted from MRC AMFM.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED20967*)
ATBHAROLLER QUANTITY
THE NUMBER OF ROLLERS PROVIDED.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(ATBH3EDJA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDJ | FIRST GROUP |
| 3EDK | SECOND GROUP |
| 3EDL | THIRD GROUP |
| 3EDM | FOURTH GROUP |
| 3EGG | ALL GROUPS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
IF STYLE/REPLY CODE(s) A1 WERE ENTERED FOR MRC AJUW, YOU MUST ANSWER MRC (AMDL and AMCS and CQBH and AGAH and AMFZ and ABHP)
IF STYLE/REPLY CODE(s) A5 WERE ENTERED FOR MRC AJUW, YOU MUST ANSWER MRC (AMFZ and AAHE and AGAH and BMZB and AMDL and AMCS and BPNY and ABHP)
IF STYLE/REPLY CODE(s) A2 WERE ENTERED FOR MRC AJUW, YOU MUST ANSWER MRC (AMDL and AMCS and CQBH and AGAH and AMFZ and ABHP)
IF STYLE/REPLY CODE(s) A3 WERE ENTERED FOR MRC AJUW, YOU MUST ANSWER MRC (AMDL and AMCS and CQBH and AGAH and AMFZ and ABHP)
IF STYLE/REPLY CODE(s) A4 WERE ENTERED FOR MRC AJUW, YOU MUST ANSWER MRC (AMDL and AMCS and CQBH and AGAH and AMFZ and ABHP)
IF STYLE/REPLY CODE(s) A6 WERE ENTERED FOR MRC AJUW, YOU MUST ANSWER MRC (AMFZ and AGAH and AAHE and AMCS and AMDL and ABHP)
IF STYLE/REPLY CODE(s) A7 WERE ENTERED FOR MRC AJUW, YOU MUST ANSWER MRC (AMDL and AGAH and AMCS and AMFZ and ABHP)
IF STYLE/REPLY CODE(s) A8 WERE ENTERED FOR MRC AJUW, YOU MUST ANSWER MRC (AMDL and AMCS and AGAH and AMFM and AMFZ and ABHP)
IF STYLE/REPLY CODE(s) A9 WERE ENTERED FOR MRC AJUW, YOU MUST ANSWER MRC (AMDL and AMCS and AGAH and AMFM and AMFZ and ABHP)
IF STYLE/REPLY CODE(s) A10 WERE ENTERED FOR MRC AJUW, YOU MUST ANSWER MRC (AMDL and AMFZ and ABHP)
IF STYLE/REPLY CODE(s) A11 WERE ENTERED FOR MRC AJUW, YOU MUST ANSWER MRC (AMDL and AGAH and AMFZ and ABHP)
IF STYLE/REPLY CODE(s) A12 WERE ENTERED FOR MRC AJUW, YOU MUST ANSWER MRC (AMDL and AAHE and AGAH and AMCS and AMFZ and ABHP)
IF STYLE/REPLY CODE(s) A13 WERE ENTERED FOR MRC AJUW, YOU MUST ANSWER MRC (AMDL and AGAH and AMCS and AMFZ and ABHP)
IF STYLE/REPLY CODE(s) A14 WERE ENTERED FOR MRC AJUW, YOU MUST ANSWER MRC (AMFZ and AMFM and AGAH and BMZB and AMDL and ABHP)
AJUWLROLLER STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ROLLER.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(AJUW3EDLLA13*;AJUW3EDLLA13$LA5*;AJUW3EDLLA13$$LA5*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDJ | FIRST GROUP |
| 3EDK | SECOND GROUP |
| 3EDL | THIRD GROUP |
| 3EGG | ALL GROUPS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAA1512 | A1 | ROUNDED TAPER |
| AAA1521 | A10 | CONCAVE ON END |
| AAA1522 | A11 | ROUNDED CORNERS ONE END |
| AAA1523 | A12 | ROUNDED ENDS |
| AAA1524 | A13 | TAPER |
| AAA1525 | A14 | TAPER |
| AAA1513 | A2 | ROUNDED TAPER |
| AAA1514 | A3 | VARIABLE DIAMETER END, CONCAVE END |
| AAA1515 | A4 | VARIABLE DIAMETER ONE END |
| AAA1516 | A5 | FLARE |
| AAA1517 | A6 | FLARE |
| AAA1518 | A7 | VARIABLE DIAMETER END |
| AAA1519 | A8 | VARIABLE DIAMETER BOTH ENDS |
| AAA1520 | A9 | OVERLAPPING |
AGAH*JMAIN BODY OVERALL LENGTH
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAH3AEEJLA2.0*;AGAH3AEEJLA2.0$JLA2.0*;AGAH3AEEJLA2.0$$JLA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDJ | FIRST GROUP |
| 3EDK | SECOND GROUP |
| 3EDL | THIRD GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AMDL*JFIRST END DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE FIRST END,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AMDL3AEEJLA2.0*;AMDL3AEEJLA2.0$JLA2.0*;AMDL3AEEJLA2.0$$JLA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDJ | FIRST GROUP |
| 3EDK | SECOND GROUP |
| 3EDL | THIRD GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AMFZ*JSECOND END DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE SECOND END,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AMFZ3EDJJLA2.0*;AMFZ3EDJJLA2.0$JLA2.0*;AMFZ3EDJJLA2.0$$JLA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDJ | FIRST GROUP |
| 3EDK | SECOND GROUP |
| 3EDL | THIRD GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AMCS*JFIRST END TAPER LENGTH
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AMCS3EDLJAB2.0*;AMCS3EDLJAB2.0$JAB2.0*;AMCS3EDLJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDJ | FIRST GROUP |
| 3EDK | SECOND GROUP |
| 3EDL | THIRD GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AAHE*JFIRST END FLARE LENGTH
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAHE3ALIJAC2.0*;AAHE3ALIJAC2.0$JAC2.0*;AAHE3ALIJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ALI | THIRD STYLE GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CQBH*JFIRST END RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQBHJAA2.0*;CQBHJAA2.0$JAA2.0*;CQBHJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BPNY*JCOUNTERSINK LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE COUNTERSINK,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BPNY3EDLJAB2.0*;BPNY3EDLJAB2.0$JAB2.0*;BPNY3EDLJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDL | THIRD GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AMFM*JSECOND END TAPER LENGTH
A MEASUREMENT OF THE LONGEST TAPER DIMENSION AT THE SECOND END,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AMFM3EDKJLA2.0*;AMFM3EDKJLA2.0$JLA2.0*;AMFM3EDKJLA2.0$$JLA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDJ | FIRST GROUP |
| 3EDK | SECOND GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BMZB*GSECOND END FLARE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE SECOND END FLARE, AND TERMINATES AT THE CIRCUMFERENCE.
Enter clear text.
(BMZBGCLEARTEXT)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHP3EDLJLB2.0*;ABHP3EDLJLB2.0$JLB2.0*;ABHP3EDLJLB2.0$$JLB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ALI | THIRD STYLE GROUP |
| 3EDJ | FIRST GROUP |
| 3EDK | SECOND GROUP |
| 3EDL | THIRD GROUP |
| 3EDM | FOURTH GROUP |
| 3EDN | FIFTH GROUP |
| 3EGE | FIRST STYLE GROUP |
| 3EGF | SINGLE STYLE GROUP |
| 3EGG | ALL GROUPS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information