A preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3ABE added to MRC MATT.
ISAC Reply 3ACI added to MRC MATT.
ISAC Reply 3ACY added to MRC MATT.
ISAC Reply 3ADI added to MRC MATT.
ISAC Reply 3ADP added to MRC MATT.
ISAC Reply 3ADR added to MRC MATT.
ISAC Reply 3ADT added to MRC MATT.
ISAC Reply 3ADX added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AEF added to MRC MATT.
ISAC Reply 3ATM added to MRC MATT.
ISAC Reply 3AVU added to MRC MATT.
ISAC Reply 3AZK added to MRC MATT.
ISAC Reply 3AZT added to MRC MATT.
ISAC Reply 3BAF added to MRC MATT.
ISAC Reply 3BBL added to MRC MATT.
ISAC Reply 3CEP added to MRC MATT.
ISAC Reply 3CTO added to MRC MATT.
ISAC Reply 3CYA added to MRC MATT.
ISAC Reply 3ETF added to MRC MATT.
ISAC Reply 3ETN added to MRC MATT.
ISAC Reply 3ETV added to MRC MATT.
ISAC Reply 3ETZ added to MRC MATT.
ISAC Reply 3EUE added to MRC MATT.
ISAC Reply 3EUF added to MRC MATT.
ISAC Reply 3EUG added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 2AA deleted from MRC MATT.
ISAC Reply 2AB deleted from MRC MATT.
ISAC Reply 2AC deleted from MRC MATT.
ISAC Reply 2AD deleted from MRC MATT.
ISAC Reply 2AE deleted from MRC MATT.
ISAC Reply 2AF deleted from MRC MATT.
ISAC Reply 2AG deleted from MRC MATT.
ISAC Reply 2AH deleted from MRC MATT.
ISAC Reply 2AJ deleted from MRC MATT.
ISAC Reply 2AK deleted from MRC MATT.
ISAC Reply 2AL deleted from MRC MATT.
ISAC Reply 2AM deleted from MRC MATT.
ISAC Reply 2AN deleted from MRC MATT.
ISAC Reply 2AP deleted from MRC MATT.
ISAC Reply 2AQ deleted from MRC MATT.
ISAC Reply 2AS deleted from MRC MATT.
ISAC Reply 2AT deleted from MRC MATT.
ISAC Reply 2AU deleted from MRC MATT.
ISAC Reply 2AV deleted from MRC MATT.
ISAC Reply 2AW deleted from MRC MATT.
ISAC Reply 2AX deleted from MRC MATT.
ISAC Reply 2AY deleted from MRC MATT.
ISAC Reply 2AZ deleted from MRC MATT.
ISAC Reply 2BA deleted from MRC MATT.
ISAC Reply 2BB deleted from MRC MATT.
ISAC Reply 2BC deleted from MRC MATT.
ISAC Reply 2BD deleted from MRC MATT.
ISAC Reply 2BE deleted from MRC MATT.
ISAC Reply 2BF deleted from MRC MATT.
ISAC Reply 2BG deleted from MRC MATT.
ISAC Reply 2BH deleted from MRC MATT.
ISAC Reply 2BJ deleted from MRC MATT.
ISAC Reply 2BK deleted from MRC MATT.
ISAC Reply 2BL deleted from MRC MATT.
ISAC Reply 2BM deleted from MRC MATT.
ISAC Reply 2BN deleted from MRC MATT.
ISAC Reply 2BP deleted from MRC MATT.
ISAC Reply 2BQ deleted from MRC MATT.
ISAC Reply 2BR deleted from MRC MATT.
ISAC Reply 2BS deleted from MRC MATT.
ISAC Reply 2BT deleted from MRC MATT.
ISAC Reply 2BU deleted from MRC MATT.
ISAC Reply 2BV deleted from MRC MATT.
ISAC Reply 2BW deleted from MRC MATT.
ISAC Reply 2BX deleted from MRC MATT.
ISAC Reply 2BY deleted from MRC MATT.
ISAC Reply 2BZ deleted from MRC MATT.
ISAC Reply 2CA deleted from MRC MATT.
ISAC Reply 2CB deleted from MRC MATT.
ISAC Reply 2CC deleted from MRC MATT.
ISAC Reply 2CD deleted from MRC MATT.
ISAC Reply 2CE deleted from MRC MATT.
ISAC Reply 3AAT added to MRC MDCL.
ISAC Reply 3ABE added to MRC MDCL.
ISAC Reply 3ACI added to MRC MDCL.
ISAC Reply 3ACY added to MRC MDCL.
ISAC Reply 3ADI added to MRC MDCL.
ISAC Reply 3ADP added to MRC MDCL.
ISAC Reply 3ADR added to MRC MDCL.
ISAC Reply 3ADT added to MRC MDCL.
ISAC Reply 3ADX added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3AEF added to MRC MDCL.
ISAC Reply 3ATM added to MRC MDCL.
ISAC Reply 3AVU added to MRC MDCL.
ISAC Reply 3AZK added to MRC MDCL.
ISAC Reply 3AZT added to MRC MDCL.
ISAC Reply 3BAF added to MRC MDCL.
ISAC Reply 3BBL added to MRC MDCL.
ISAC Reply 3CEP added to MRC MDCL.
ISAC Reply 3CTO added to MRC MDCL.
ISAC Reply 3CYA added to MRC MDCL.
ISAC Reply 3ETF added to MRC MDCL.
ISAC Reply 3ETN added to MRC MDCL.
ISAC Reply 3ETV added to MRC MDCL.
ISAC Reply 3ETZ added to MRC MDCL.
ISAC Reply 3EUE added to MRC MDCL.
ISAC Reply 3EUF added to MRC MDCL.
ISAC Reply 3EUG added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 2AA deleted from MRC MDCL.
ISAC Reply 2AB deleted from MRC MDCL.
ISAC Reply 2AC deleted from MRC MDCL.
ISAC Reply 2AD deleted from MRC MDCL.
ISAC Reply 2AE deleted from MRC MDCL.
ISAC Reply 2AF deleted from MRC MDCL.
ISAC Reply 2AG deleted from MRC MDCL.
ISAC Reply 2AH deleted from MRC MDCL.
ISAC Reply 2AJ deleted from MRC MDCL.
ISAC Reply 2AK deleted from MRC MDCL.
ISAC Reply 2AL deleted from MRC MDCL.
ISAC Reply 2AM deleted from MRC MDCL.
ISAC Reply 2AN deleted from MRC MDCL.
ISAC Reply 2AP deleted from MRC MDCL.
ISAC Reply 2AQ deleted from MRC MDCL.
ISAC Reply 2AS deleted from MRC MDCL.
ISAC Reply 2AT deleted from MRC MDCL.
ISAC Reply 2AU deleted from MRC MDCL.
ISAC Reply 2AV deleted from MRC MDCL.
ISAC Reply 2AW deleted from MRC MDCL.
ISAC Reply 2AX deleted from MRC MDCL.
ISAC Reply 2AY deleted from MRC MDCL.
ISAC Reply 2AZ deleted from MRC MDCL.
ISAC Reply 2BA deleted from MRC MDCL.
ISAC Reply 2BB deleted from MRC MDCL.
ISAC Reply 2BC deleted from MRC MDCL.
ISAC Reply 2BD deleted from MRC MDCL.
ISAC Reply 2BE deleted from MRC MDCL.
ISAC Reply 2BF deleted from MRC MDCL.
ISAC Reply 2BG deleted from MRC MDCL.
ISAC Reply 2BH deleted from MRC MDCL.
ISAC Reply 2BJ deleted from MRC MDCL.
ISAC Reply 2BK deleted from MRC MDCL.
ISAC Reply 2BL deleted from MRC MDCL.
ISAC Reply 2BM deleted from MRC MDCL.
ISAC Reply 2BN deleted from MRC MDCL.
ISAC Reply 2BP deleted from MRC MDCL.
ISAC Reply 2BQ deleted from MRC MDCL.
ISAC Reply 2BR deleted from MRC MDCL.
ISAC Reply 2BS deleted from MRC MDCL.
ISAC Reply 2BT deleted from MRC MDCL.
ISAC Reply 2BU deleted from MRC MDCL.
ISAC Reply 2BV deleted from MRC MDCL.
ISAC Reply 2BW deleted from MRC MDCL.
ISAC Reply 2BX deleted from MRC MDCL.
ISAC Reply 2BY deleted from MRC MDCL.
ISAC Reply 2BZ deleted from MRC MDCL.
ISAC Reply 2CA deleted from MRC MDCL.
ISAC Reply 2CB deleted from MRC MDCL.
ISAC Reply 2CC deleted from MRC MDCL.
ISAC Reply 2CD deleted from MRC MDCL.
ISAC Reply 2CE deleted from MRC MDCL.
ISAC Reply 3AAT added to MRC SFTT.
ISAC Reply 3ACY added to MRC SFTT.
ISAC Reply 3ADI added to MRC SFTT.
ISAC Reply 3ADP added to MRC SFTT.
ISAC Reply 3ADR added to MRC SFTT.
ISAC Reply 3ADT added to MRC SFTT.
ISAC Reply 3ADX added to MRC SFTT.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3ATM added to MRC SFTT.
ISAC Reply 3CFD added to MRC SFTT.
ISAC Reply 3CTO added to MRC SFTT.
ISAC Reply 3CYA added to MRC SFTT.
ISAC Reply 3ETN added to MRC SFTT.
ISAC Reply 3ETP added to MRC SFTT.
ISAC Reply 3ETV added to MRC SFTT.
ISAC Reply 3EUC added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 2AA deleted from MRC SFTT.
ISAC Reply 2AB deleted from MRC SFTT.
ISAC Reply 2AC deleted from MRC SFTT.
ISAC Reply 2AD deleted from MRC SFTT.
ISAC Reply 2AE deleted from MRC SFTT.
ISAC Reply 2AF deleted from MRC SFTT.
ISAC Reply 2AG deleted from MRC SFTT.
ISAC Reply 2AH deleted from MRC SFTT.
ISAC Reply 2AJ deleted from MRC SFTT.
ISAC Reply 2AK deleted from MRC SFTT.
ISAC Reply 2AL deleted from MRC SFTT.
ISAC Reply 2AM deleted from MRC SFTT.
ISAC Reply 2AN deleted from MRC SFTT.
ISAC Reply 2AP deleted from MRC SFTT.
ISAC Reply 2AQ deleted from MRC SFTT.
ISAC Reply 2AS deleted from MRC SFTT.
ISAC Reply 2AT deleted from MRC SFTT.
ISAC Reply 2AU deleted from MRC SFTT.
ISAC Reply 2AV deleted from MRC SFTT.
ISAC Reply 2AW deleted from MRC SFTT.
ISAC Reply 2AX deleted from MRC SFTT.
ISAC Reply 2AY deleted from MRC SFTT.
ISAC Reply 2AZ deleted from MRC SFTT.
ISAC Reply 2BA deleted from MRC SFTT.
ISAC Reply 2BB deleted from MRC SFTT.
ISAC Reply 2BC deleted from MRC SFTT.
ISAC Reply 2BD deleted from MRC SFTT.
ISAC Reply 2BE deleted from MRC SFTT.
ISAC Reply 2BF deleted from MRC SFTT.
ISAC Reply 2BG deleted from MRC SFTT.
ISAC Reply 2BH deleted from MRC SFTT.
ISAC Reply 2BJ deleted from MRC SFTT.
ISAC Reply 2BK deleted from MRC SFTT.
ISAC Reply 2BL deleted from MRC SFTT.
ISAC Reply 2BM deleted from MRC SFTT.
ISAC Reply 2BN deleted from MRC SFTT.
ISAC Reply 2BP deleted from MRC SFTT.
ISAC Reply 2BQ deleted from MRC SFTT.
ISAC Reply 2BR deleted from MRC SFTT.
ISAC Reply 2BS deleted from MRC SFTT.
ISAC Reply 2BT deleted from MRC SFTT.
ISAC Reply 2BU deleted from MRC SFTT.
ISAC Reply 2BV deleted from MRC SFTT.
ISAC Reply 2BW deleted from MRC SFTT.
ISAC Reply 2BX deleted from MRC SFTT.
ISAC Reply 2BY deleted from MRC SFTT.
ISAC Reply 2BZ deleted from MRC SFTT.
ISAC Reply 2CA deleted from MRC SFTT.
ISAC Reply 2CB deleted from MRC SFTT.
ISAC Reply 2CC deleted from MRC SFTT.
ISAC Reply 2CD deleted from MRC SFTT.
ISAC Reply 2CE deleted from MRC SFTT.
ISAC Reply 3AAT added to MRC STDC.
ISAC Reply 3ACY added to MRC STDC.
ISAC Reply 3ADI added to MRC STDC.
ISAC Reply 3ADP added to MRC STDC.
ISAC Reply 3ADR added to MRC STDC.
ISAC Reply 3ADT added to MRC STDC.
ISAC Reply 3ADX added to MRC STDC.
ISAC Reply 3AEE added to MRC STDC.
ISAC Reply 3ATM added to MRC STDC.
ISAC Reply 3CFD added to MRC STDC.
ISAC Reply 3CTO added to MRC STDC.
ISAC Reply 3CYA added to MRC STDC.
ISAC Reply 3ETN added to MRC STDC.
ISAC Reply 3ETP added to MRC STDC.
ISAC Reply 3ETV added to MRC STDC.
ISAC Reply 3EUC added to MRC STDC.
ISAC Reply 3HOU added to MRC STDC.
ISAC Reply 2AA deleted from MRC STDC.
ISAC Reply 2AB deleted from MRC STDC.
ISAC Reply 2AC deleted from MRC STDC.
ISAC Reply 2AD deleted from MRC STDC.
ISAC Reply 2AE deleted from MRC STDC.
ISAC Reply 2AF deleted from MRC STDC.
ISAC Reply 2AG deleted from MRC STDC.
ISAC Reply 2AH deleted from MRC STDC.
ISAC Reply 2AJ deleted from MRC STDC.
ISAC Reply 2AK deleted from MRC STDC.
ISAC Reply 2AL deleted from MRC STDC.
ISAC Reply 2AM deleted from MRC STDC.
ISAC Reply 2AN deleted from MRC STDC.
ISAC Reply 2AP deleted from MRC STDC.
ISAC Reply 2AQ deleted from MRC STDC.
ISAC Reply 2AS deleted from MRC STDC.
ISAC Reply 2AT deleted from MRC STDC.
ISAC Reply 2AU deleted from MRC STDC.
ISAC Reply 2AV deleted from MRC STDC.
ISAC Reply 2AW deleted from MRC STDC.
ISAC Reply 2AX deleted from MRC STDC.
ISAC Reply 2AY deleted from MRC STDC.
ISAC Reply 2AZ deleted from MRC STDC.
ISAC Reply 2BA deleted from MRC STDC.
ISAC Reply 2BB deleted from MRC STDC.
ISAC Reply 2BC deleted from MRC STDC.
ISAC Reply 2BD deleted from MRC STDC.
ISAC Reply 2BE deleted from MRC STDC.
ISAC Reply 2BF deleted from MRC STDC.
ISAC Reply 2BG deleted from MRC STDC.
ISAC Reply 2BH deleted from MRC STDC.
ISAC Reply 2BJ deleted from MRC STDC.
ISAC Reply 2BK deleted from MRC STDC.
ISAC Reply 2BL deleted from MRC STDC.
ISAC Reply 2BM deleted from MRC STDC.
ISAC Reply 2BN deleted from MRC STDC.
ISAC Reply 2BP deleted from MRC STDC.
ISAC Reply 2BQ deleted from MRC STDC.
ISAC Reply 2BR deleted from MRC STDC.
ISAC Reply 2BS deleted from MRC STDC.
ISAC Reply 2BT deleted from MRC STDC.
ISAC Reply 2BU deleted from MRC STDC.
ISAC Reply 2BV deleted from MRC STDC.
ISAC Reply 2BW deleted from MRC STDC.
ISAC Reply 2BX deleted from MRC STDC.
ISAC Reply 2BY deleted from MRC STDC.
ISAC Reply 2BZ deleted from MRC STDC.
ISAC Reply 2CA deleted from MRC STDC.
ISAC Reply 2CB deleted from MRC STDC.
ISAC Reply 2CC deleted from MRC STDC.
ISAC Reply 2CD deleted from MRC STDC.
ISAC Reply 2CE deleted from MRC STDC.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED20815*)
AXGYDMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM.
Enter the applicable reply code from the table below
(AXGYDABN*;AXGYDBJS$DABC*;AXGYDBJS$$DABC*)
| Table 1 |
| Reply Code (AM39) | Reply |
| BDH | ADHESIVE |
| ABB | BASE |
| AAC | BOLT |
| ABC | BRACKET |
| BJS | COUNTERBORED HOLE |
| AKQ | COUNTERSUNK HOLE |
| BZM | DART |
| AKR | DIMPLED HOLE |
| BHF | GUSSET |
| AAB | INTEGRAL |
| ABN | LUG |
| AAL | MOUNTING SLOTS |
| AAD | PIN |
| AEE | PLATE |
| BZN | PROJECTING TAB |
| ABW | SCREW |
| AHA | SOLDER |
| AHF | THREADED HOLE |
| ACQ | UNTHREADED HOLE |
| AKT | WELDING PROJECTION |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AZKDTTA000*;MATT3AZKDTTA000$DCU0167*;MATT3AZKDTTA000$$DCU0167*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ABE | BASE |
| 3ACI | BOLT |
| 3ACY | HOUSING |
| 3ADI | NUT |
| 3ADP | RETAINER |
| 3ADR | RIVET |
| 3ADT | SPRING |
| 3ADX | WASHER |
| 3AEE | OVERALL |
| 3AEF | HANDLE |
| 3ATM | SCREW |
| 3AVU | SLEEVE |
| 3AZK | BRACKET |
| 3AZT | PIN |
| 3BAF | STOP |
| 3BBL | COVER |
| 3CEP | CASE |
| 3CTO | CUSHION |
| 3CYA | ARM |
| 3ETF | YOKE |
| 3ETN | ACTUATOR ARM |
| 3ETV | LEVER |
| 3ETZ | MOUNTING BRACKET |
| 3EUE | SLIDE |
| 3EUF | STRIKE |
| 3EUG | WING NUT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL1100 | ALUMINUM ALLOY 1100 |
| AL1230 | ALUMINUM ALLOY 1230 |
| AL2011 | ALUMINUM ALLOY 2011 |
| AL2014 | ALUMINUM ALLOY 2014 |
| AL2017 | ALUMINUM ALLOY 2017 |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL0034 | ALUMINUM ALLOY 208.0 |
| AL3003 | ALUMINUM ALLOY 3003 |
| AL0045 | ALUMINUM ALLOY 355.0 |
| AL0046 | ALUMINUM ALLOY 356.0 |
| AL0029 | ALUMINUM ALLOY 360.0 |
| AL0031 | ALUMINUM ALLOY 380.0 |
| AL5052 | ALUMINUM ALLOY 5052 |
| AL5083 | ALUMINUM ALLOY 5083 |
| AL5086 | ALUMINUM ALLOY 5086 |
| AL5356 | ALUMINUM ALLOY 5356 |
| AL5456 | ALUMINUM ALLOY 5456 |
| AL6003 | ALUMINUM ALLOY 6003 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL6062 | ALUMINUM ALLOY 6062 |
| AL6063 | ALUMINUM ALLOY 6063 |
| AL6262 | ALUMINUM ALLOY 6262 |
| AL7075 | ALUMINUM ALLOY 7075 |
| AL7178 | ALUMINUM ALLOY 7178 |
| AL0002 | ALUMINUM ALLOY A356.0 |
| AL0042 | ALUMINUM ALLOY A712.0 |
| AL0033 | ALUMINUM ALLOY B443.0 |
| AL0060 | ALUMINUM ALLOY C355.0 |
| ASA000 | ASBESTOS |
| CSA000 | CELLULOSE |
| CTA000 | COBALT |
| CTB000 | COBALT ALLOY |
| CT0004 | COBALT COMP 6 |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0068 | COPPER ALLOY 170 |
| CU0069 | COPPER ALLOY 172 |
| CU0233 | COPPER ALLOY 173 |
| CU0076 | COPPER ALLOY 240 |
| CU0079 | COPPER ALLOY 260 |
| CU0080 | COPPER ALLOY 268 |
| CU0274 | COPPER ALLOY 274 |
| CU0088 | COPPER ALLOY 342 |
| CU0091 | COPPER ALLOY 360 |
| CU0509 | COPPER ALLOY 509 |
| CU0103 | COPPER ALLOY 510 |
| CU0105 | COPPER ALLOY 521 |
| CU0106 | COPPER ALLOY 524 |
| CU0109 | COPPER ALLOY 544 |
| CU0122 | COPPER ALLOY 630 |
| CU0670 | COPPER ALLOY 670 |
| CU0146 | COPPER ALLOY 735 |
| CU0148 | COPPER ALLOY 745 |
| CU0150 | COPPER ALLOY 752 |
| CU0151 | COPPER ALLOY 762 |
| CU0152 | COPPER ALLOY 764 |
| CU0153 | COPPER ALLOY 766 |
| CU0157 | COPPER ALLOY 770 |
| CU0162 | COPPER ALLOY 794 |
| CU0166 | COPPER ALLOY 820 |
| CU0167 | COPPER ALLOY 824 |
| CU0168 | COPPER ALLOY 825 |
| CU0177 | COPPER ALLOY 852 |
| CU0178 | COPPER ALLOY 854 |
| CU0180 | COPPER ALLOY 857 |
| CU0185 | COPPER ALLOY 865 |
| CU0195 | COPPER ALLOY 903 |
| CU0205 | COPPER ALLOY 927 |
| CU1156 | COPPER ALLOY UNS C79200 |
| CCA000 | COTTON |
| FBA000 | FIBER |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| FEA000 | IRON |
| FE0019 | IRON ALLOY 660 |
| FEB000 | IRON CAST |
| FE0117 | IRON CAST UNS F10006 |
| FE0124 | IRON CAST UNS F20000 |
| FE0038 | IRON CAST UNS F22200 |
| FE0039 | IRON CAST UNS F22400 |
| FE0056 | IRON CAST UNS F23530 |
| FE0080 | IRON CAST UNS F33101 |
| FE0067 | IRON CAST UNS F34800 |
| FE0081 | IRON CAST UNS F43020 |
| FE0082 | IRON CAST UNS F43021 |
| FEC000 | IRON MALLEABLE |
| PBB000 | LEAD ALLOY |
| LRA000 | LEATHER |
| LRG000 | LEATHER CATTLEHIDE |
| MGA000 | MAGNESIUM |
| MG0007 | MAGNESIUM ALLOY AZ63A |
| MG0003 | MAGNESIUM ALLOY AZ80A |
| MG0008 | MAGNESIUM ALLOY AZ91C |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| NL0008 | NICKEL ALLOY 400 |
| NL0009 | NICKEL ALLOY 600 |
| NL0017 | NICKEL ALLOY R-405 |
| NL0096 | NICKEL ALLOY UNS N06002 |
| NL0007 | NICKEL ALLOY X-750 |
| PPA000 | PAPER |
| PCA000 | PLASTIC |
| PCH000 | PLASTIC EPOXY |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCQ000 | PLASTIC POLYCAPROLACTAM |
| PCW000 | PLASTIC POLYESTER |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| PCAM00 | PLASTIC POLYHEXAMETHYLENE AMIDE |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAAAB | PLASTIC POLYUNDECANOAMIDE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCAP00 | PLASTIC VINYL |
| CLB000 | PORCELAIN |
| RCE000 | RUBBER |
| RC0019 | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| RC0022 | RUBBER BUTADIENE-STYRENE CLASS SBR |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RC0017 | RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR |
| RC0020 | RUBBER POLYISOPRENE NATURAL CLASS NR |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| AGA000 | SILVER |
| STA000 | STEEL |
| ST1005 | STEEL COMP 1005 |
| ST1006 | STEEL COMP 1006 |
| ST1008 | STEEL COMP 1008 |
| ST1009 | STEEL COMP 1009 |
| ST1010 | STEEL COMP 1010 |
| ST1011 | STEEL COMP 1011 |
| ST1012 | STEEL COMP 1012 |
| ST1013 | STEEL COMP 1013 |
| ST1015 | STEEL COMP 1015 |
| ST1016 | STEEL COMP 1016 |
| ST1017 | STEEL COMP 1017 |
| ST1018 | STEEL COMP 1018 |
| ST1019 | STEEL COMP 1019 |
| ST1020 | STEEL COMP 1020 |
| ST1021 | STEEL COMP 1021 |
| ST1022 | STEEL COMP 1022 |
| ST1023 | STEEL COMP 1023 |
| ST1025 | STEEL COMP 1025 |
| ST1026 | STEEL COMP 1026 |
| ST1030 | STEEL COMP 1030 |
| ST1033 | STEEL COMP 1033 |
| ST1035 | STEEL COMP 1035 |
| ST1040 | STEEL COMP 1040 |
| ST1045 | STEEL COMP 1045 |
| ST1046 | STEEL COMP 1046 |
| ST1050 | STEEL COMP 1050 |
| ST1055 | STEEL COMP 1055 |
| ST0530 | STEEL COMP 105-85 |
| ST1060 | STEEL COMP 1060 |
| ST1064 | STEEL COMP 1064 |
| ST1065 | STEEL COMP 1065 |
| ST1070 | STEEL COMP 1070 |
| ST1074 | STEEL COMP 1074 |
| ST1075 | STEEL COMP 1075 |
| ST1078 | STEEL COMP 1078 |
| ST1080 | STEEL COMP 1080 |
| ST1084 | STEEL COMP 1084 |
| ST1085 | STEEL COMP 1085 |
| ST1086 | STEEL COMP 1086 |
| ST1090 | STEEL COMP 1090 |
| ST1095 | STEEL COMP 1095 |
| ST1117 | STEEL COMP 1117 |
| ST1118 | STEEL COMP 1118 |
| ST1119 | STEEL COMP 1119 |
| ST1137 | STEEL COMP 1137 |
| ST1211 | STEEL COMP 1211 |
| ST1212 | STEEL COMP 1212 |
| ST1213 | STEEL COMP 1213 |
| ST1340 | STEEL COMP 1340 |
| ST0547 | STEEL COMP 135M |
| ST0531 | STEEL COMP 150-125 |
| ST1552 | STEEL COMP 1552 |
| ST1566 | STEEL COMP 1566 |
| ST0201 | STEEL COMP 201 |
| ST0202 | STEEL COMP 202 |
| ST0301 | STEEL COMP 301 |
| ST0302 | STEEL COMP 302 |
| ST0303 | STEEL COMP 303 |
| ST0079 | STEEL COMP 303SE |
| ST0304 | STEEL COMP 304 |
| ST0305 | STEEL COMP 305 |
| ST0309 | STEEL COMP 309 |
| ST0310 | STEEL COMP 310 |
| ST0316 | STEEL COMP 316 |
| ST0321 | STEEL COMP 321 |
| ST0347 | STEEL COMP 347 |
| ST0348 | STEEL COMP 348 |
| ST1688 | STEEL COMP 35NC6 |
| ST4037 | STEEL COMP 4037 |
| ST0410 | STEEL COMP 410 |
| ST4130 | STEEL COMP 4130 |
| ST4140 | STEEL COMP 4140 |
| ST4150 | STEEL COMP 4150 |
| ST0416 | STEEL COMP 416 |
| ST0420 | STEEL COMP 420 |
| ST0430 | STEEL COMP 430 |
| ST4340 | STEEL COMP 4340 |
| ST0107 | STEEL COMP 440C |
| ST0285 | STEEL COMP 440FSE |
| ST4817 | STEEL COMP 4817 |
| ST6117 | STEEL COMP 6117 |
| ST6150 | STEEL COMP 6150 |
| ST0630 | STEEL COMP 630 |
| ST0631 | STEEL COMP 631 |
| ST8630 | STEEL COMP 8630 |
| ST8640 | STEEL COMP 8640 |
| ST0184 | STEEL COMP 90-60 |
| ST9260 | STEEL COMP 9260 |
| ST0026 | STEEL COMP E3310 |
| ST0028 | STEEL COMP E4340 |
| ST0030 | STEEL COMP E52100 |
| ST0031 | STEEL COMP E9310 |
| ST0171 | STEEL COMP M1010 |
| ST0220 | STEEL COMP M1012 |
| ST0176 | STEEL COMP M1015 |
| ST0163 | STEEL COMP M1020 |
| ST0046 | STEEL COMP MT1010 |
| ST0048 | STEEL COMP MT1020 |
| ST0786 | STEEL COMP XC38 |
| STB000 | STEEL CORROSION RESISTING |
| ST0586 | STEEL UNS J03001 |
| ST0575 | STEEL UNS J04501 |
| ST1598 | STEEL UNS J05002 |
| ST0567 | STEEL UNS J91150 |
| ST0626 | STEEL UNS J91152 |
| ST1836 | STEEL UNS J92200 |
| ST0623 | STEEL UNS J92650 |
| ST0599 | STEEL UNS J92811 |
| ST1264 | STEEL UNS K02500 |
| ST1265 | STEEL UNS K02502 |
| ST0552 | STEEL UNS K02600 |
| ST0574 | STEEL UNS K02708 |
| ST0667 | STEEL UNS K06701 |
| ST0627 | STEEL UNS K07001 |
| ST0668 | STEEL UNS K08500 |
| ST1530 | STEEL UNS K41583 |
| TTA000 | TITANIUM ALLOY |
| TT0052 | TITANIUM ALLOY UNS R56400 |
| TT0065 | TITANIUM ALLOY UNS R58450 |
| WDC000 | WOOD |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ABE | BASE |
| 3ACI | BOLT |
| 3ACY | HOUSING |
| 3ADI | NUT |
| 3ADP | RETAINER |
| 3ADR | RIVET |
| 3ADT | SPRING |
| 3ADX | WASHER |
| 3AEE | OVERALL |
| 3AEF | HANDLE |
| 3ATM | SCREW |
| 3AVU | SLEEVE |
| 3AZK | BRACKET |
| 3AZT | PIN |
| 3BAF | STOP |
| 3BBL | COVER |
| 3CEP | CASE |
| 3CTO | CUSHION |
| 3CYA | ARM |
| 3ETF | YOKE |
| 3ETN | ACTUATOR ARM |
| 3ETV | LEVER |
| 3ETZ | MOUNTING BRACKET |
| 3EUE | SLIDE |
| 3EUF | STRIKE |
| 3EUG | WING NUT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
IF STYLE/REPLY CODE(s) C1 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGL and AZWC and ABRY and CKDL and AZWD and ABPX)
IF STYLE/REPLY CODE(s) C2 OR C4 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGL and ABPX and ABRY and CJYS and CKDL)
IF STYLE/REPLY CODE(s) C3 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGL and ABRY and AZWD and CKDL and ABPX)
IF STYLE/REPLY CODE(s) C5, C6, C7 OR C11 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AZWB and ABGL and AZWA and CKDL and ABRY and CJYS and ABPX)
IF STYLE/REPLY CODE(s) C8 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BZWG and CJYS and ABGL and ABRY and AZWA and CKDL and ABPX)
IF STYLE/REPLY CODE(s) C9 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BZWG and CJYS and ABGL and ABRY and ABPX)
IF STYLE/REPLY CODE(s) C10 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGL and ABKW and ABRY and ABPX)
IF STYLE/REPLY CODE(s) C12 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CJYS and ABGL and ABPX and ABRY and CKDL)
IF STYLE/REPLY CODE(s) C13 OR C14 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AZWK and ABGL and ABRY and CNBP and CNBN and ABPX and CJYS and AZWD)
IF STYLE/REPLY CODE(s) C15, C17 OR C22 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ASXK and AAUB and ABGL and ABRY and ABPX and CJYS and ABKW)
IF STYLE/REPLY CODE(s) C16 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ASXK and AAUB and ABRY and ABGL and AZWD and CJYS and CNBN and ABPX)
IF STYLE/REPLY CODE(s) C18 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAUB and ASXK and AZDA and ABRY and BPCM and ABGL and CJYS and AZWD and ABPX)
IF STYLE/REPLY CODE(s) C19 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGC and ABGL and ABRY and ABPX and CJYS and AZWD and AZWJ)
IF STYLE/REPLY CODE(s) C20 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABPX and ABKW and ABGL and AZWC and AZWF and ASXK and AAUB and ABRY)
IF STYLE/REPLY CODE(s) C21 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABPX and ABRY and ABGL and CJYS and AAUB and ASXK)
IF STYLE/REPLY CODE(s) C23 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BPCM and ABGL and ABPX and ASXK and AAUB and CJYS and ABKW and AZWE and ABRY)
IF STYLE/REPLY CODE(s) C24 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAUB and ABGL and ABRY and CJYS)
IF STYLE/REPLY CODE(s) C25 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ASXK and AAUB and ABGL and ABRY and AZWD and ABKW)
IF STYLE/REPLY CODE(s) C26 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABRY and ABGL and BPCM and AAUB and ASXK and CJYS and ABPX and ABKW)
IF STYLE/REPLY CODE(s) C27 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAUB and ASXK and ABGL and ABRY and ABPX and AZWE and ABKW)
IF STYLE/REPLY CODE(s) C28 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ASXK and AAUB and ABGL and ABRY and ABPX and ABKW)
IF STYLE/REPLY CODE(s) C29, C30 OR C31 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ASXK and AAUB and ABGL and ABPX and CJYS and ABKW and AZWE and ABRY)
IF STYLE/REPLY CODE(s) C32 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AZWD and AZWE and ABRY and ABGL and ABPX)
IF STYLE/REPLY CODE(s) C33 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGL and ABRY and CKDL and AZWD and ABPX)
IF STYLE/REPLY CODE(s) C34 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABRD and ASXK and AAUB and ABGL and AZWF and ABRY and ABPX and AZWD and AZWE and CLQM and CJYT)
IF STYLE/REPLY CODE(s) C35 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGL and AAUB and ASXK and AZWJ and ABKW and AZWD and AZWG and CJYT and ABPX)
IF STYLE/REPLY CODE(s) C36 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAUB and ASXK and ABGL and ABGC and CKDL and ABRY and AZWF and AZWD and ABKW and AZWC)
IF STYLE/REPLY CODE(s) C37 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AZWC and ABPX and ABRY and ABGL and ABGC and ABGD and BPCM)
IF STYLE/REPLY CODE(s) C38 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABRY and ASXK and AAUB and ABGL and AZWD and AZWH and ABPX)
IF STYLE/REPLY CODE(s) C39 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAUB and ASXK and ABGL and AZWF and ABRY and AZWD and AZWG and AZWE and ABPX and ABKW)
IF STYLE/REPLY CODE(s) C40 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AZWF and AAUB and ASXK and ABRY and AZWE and ABGL and ABPX and AZWG and CLQM)
IF STYLE/REPLY CODE(s) C41 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AZWF and ABGL and ASXK and AAUB and ABRY and AZWG and ABPX and ABKW)
IF STYLE/REPLY CODE(s) C42 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BPCM and ASXK and ABGL and AAUB and AZWE and AZWC and ABRY and AZWG and ABKW and ABPX)
IF STYLE/REPLY CODE(s) C43 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AZWF and ABGL and ABRY and AAUB and ASXK and AZWD and AZWC and AZWG and ABPX and CLQM)
IF STYLE/REPLY CODE(s) C44 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGL and ABPX and ABRY and CLQM and AZWD and ABKW)
IF STYLE/REPLY CODE(s) C47 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABPX and AZWD and ABKW and ABRY and AAUB and ASXK and ABGL)
IF STYLE/REPLY CODE(s) C45 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGL and ASXK and AAUB and ABRY and CJYS and AZWD and ABPX)
IF STYLE/REPLY CODE(s) C46 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAUB and ABGL and ABKW and ABPX and ABRY and CKDL and ASXK)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLC1)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| BE10018 | C1 | SINGLE GRIP |
| BE10027 | C10 | U-SHAPED |
| BE10028 | C11 | STANDOFF |
| BE10029 | C12 | DOUBLE GRIP |
| BE10030 | C13 | S - SHAPED |
| BE10031 | C14 | S-SHAPED |
| BE10032 | C15 | STANDOFF |
| BE10033 | C16 | C-SHAPED |
| BE10034 | C17 | STANDOFF |
| BE10035 | C18 | SINGLE GRIP |
| BE10036 | C19 | LOOP |
| BE10019 | C2 | DOUBLE GRIP |
| BE10037 | C20 | SPECIAL |
| BE10038 | C21 | TEE W/ HOLES |
| BE10039 | C22 | C-SHAPED |
| BE10040 | C23 | STANDOFF |
| BE10041 | C24 | PUSH ON |
| BE10042 | C25 | SPECIAL |
| BE10043 | C26 | STANDOFF |
| BE10044 | C27 | U-SHAPED |
| BE10045 | C28 | U-SHAPED |
| BE10046 | C29 | STANDOFF |
| BE10020 | C3 | SINGLE GRIP |
| BE10047 | C30 | STANDOFF |
| BE10048 | C31 | STANDOFF |
| BE10049 | C32 | SPECIAL |
| BE10050 | C33 | SPECIAL |
| BE10051 | C34 | SPECIAL |
| BE10052 | C35 | SPECIAL |
| BE10053 | C36 | SPECIAL |
| BE10054 | C37 | TEE W/ SLOT |
| BE10055 | C38 | SPECIAL |
| BE10056 | C39 | SPECIAL |
| BE10021 | C4 | DOUBLE GRIP |
| BE10057 | C40 | SPECIAL |
| BE10058 | C41 | FLAT CONCAVE |
| BE10059 | C42 | TEE W/ HOLES |
| BE10060 | C43 | SPECIAL |
| BE10061 | C44 | DOUBLE GRIP |
| BE10062 | C45 | SINGLE GRIP |
| BE10063 | C46 | SPECIAL |
| BE10064 | C47 | L-SHAPED |
| BE10022 | C5 | STANDOFF |
| BE10023 | C6 | STANDOFF |
| BE10024 | C7 | STANDOFF |
| BE10025 | C8 | STANDOFF |
| BE10026 | C9 | STANDOFF |
AAUB*JHOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAUBJAC2.0*;AAUBJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGC*JSLOT WIDTH
THE DISTANCE,MEASURED ALONG A STRAIGHT LINE PERPENDICULAR TO THE LONGITUDINAL AXIS OF THE SLOT,FROM ONE EDGE TO THE OTHER.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGCJAA2.0*;ABGCJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGD*JSLOT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE SLOT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGDJAA2.0*;ABGDJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJAA2.0*;ABGLJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAB2.0*;ABKWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABPX*JMATERIAL THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF THE MATERIAL,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABPXJAA2.0*;ABPXJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRD*JSECOND HOLE DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRDJAA2.0*;ABRDJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAC2.0*;ABRYJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZDA*JLOOP WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A LOOP,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZDAJAC2.0*;AZDAJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZWA*JPRONG SHANK WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZWAJAA2.0*;AZWAJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZWB*JCENTER TO CENTER DISTANCE BETWEEN LOOP AND PRONG
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZWBJAC2.0*;AZWBJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZWC*JLOOP RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZWCJAC2.0*;AZWCJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZWD*JLOOP OPENING WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE LOOP OPENING,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZWDJAB2.0*;AZWDJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZWE*JDISTANCE FROM LOOP CENTER TO END
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZWEJAC2.0*;AZWEJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZWF*JDISTANCE FROM END TO HOLE NEAREST LOOP
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZWFJAA2.0*;AZWFJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZWG*JDISTANCE FROM BASE TO LIP
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZWGJAC2.0*;AZWGJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZWH*JDISTANCE FROM END TO NEAREST BEND
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZWHJAB2.0*;AZWHJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZWJ*JDISTANCE FROM LOOP TO MOUNTING TAB
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZWJJAC2.0*;AZWJJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZWK*JCENTER TO CENTER DISTANCE BETWEEN LOOPS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZWKJAB2.0*;AZWKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BPCM*JSMALLEST WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BPCMJAB2.0*;BPCMJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BZWG*JPANEL THICKNESS FOR WHICH DESIGNED
A MEASUREMENT OF THE SMALLEST DIMENSION OF THE PANEL FOR WHICH THE ITEM IS DESIGNED,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BZWGJAA2.0*;BZWGJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CJYS*JLOOP/HOLDING DIMENSION
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CJYSJAC2.0*;CJYSJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CJYT*JSMALLEST HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CJYTJAC2.0*;CJYTJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CKDL*JPRONG/LIP LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CKDLJAB2.0*;CKDLJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CLQM*JLOOP HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CLQMJAC2.0*;CLQMJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CNBN*JLOOP/HOLDING SMALLER DIMENSION
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CNBNJAA2.0*;CNBNJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CNBP*JLOOP OPENING SMALLER WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CNBPJAB2.0*;CNBPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ASXK*AHOLE QUANTITY
THE NUMBER OF HOLES PROVIDED.
Enter the numeric reply with a minimum of one digit.
(ASXKA10*)
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3ADIDRCA000*;SFTT3ADIDRCA000$DPBA000*;SFTT3ADIDRCA000$$DPBA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACY | HOUSING |
| 3ADI | NUT |
| 3ADP | RETAINER |
| 3ADR | RIVET |
| 3ADT | SPRING |
| 3ADX | WASHER |
| 3AEE | OVERALL |
| 3ATM | SCREW |
| 3CFD | HOOK |
| 3CTO | CUSHION |
| 3CYA | ARM |
| 3ETN | ACTUATOR ARM |
| 3ETP | CATCH |
| 3ETV | LEVER |
| 3EUC | PIVOT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| ALB000 | ALUMINUM |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| DCA000 | DICHROMATE |
| ENA000 | ENAMEL |
| END000 | ENAMEL BAKED |
| ENF000 | ENAMEL SEMIGLOSS |
| AUA000 | GOLD |
| LQA000 | LACQUER |
| LQD000 | LACQUER ACRYLIC |
| PBA000 | LEAD |
| LCB000 | LUBRICANT |
| MTB000 | MOLYBDENUM |
| NLA000 | NICKEL |
| XXB000 | OXIDE |
| XXA000 | OXIDE FILM |
| XXD000 | OXIDE ZINC |
| PNA000 | PAINT |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PHB000 | PHOSPHATE IRON |
| PHC000 | PHOSPHATE MANGANESE |
| PHD000 | PHOSPHATE ZINC |
| PCA000 | PLASTIC |
| PRA000 | PRIMER |
| RHA000 | RHODIUM |
| RCA000 | RUBBER |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| AGA000 | SILVER |
| SNA000 | TIN |
| TTA000 | TITANIUM |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
| AAAAAB | ZINC NICKEL |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACY | HOUSING |
| 3ADI | NUT |
| 3ADP | RETAINER |
| 3ADR | RIVET |
| 3ADT | SPRING |
| 3ADX | WASHER |
| 3AEE | OVERALL |
| 3ATM | SCREW |
| 3CFD | HOOK |
| 3CTO | CUSHION |
| 3CYA | ARM |
| 3ETN | ACTUATOR ARM |
| 3ETP | CATCH |
| 3ETV | LEVER |
| 3EUC | PIVOT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDMS0012*;HUESDBU0000$DMS0065*;HUESDBU0000$$DMS0065*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| BL0000 | BLACK |
| BU0000 | BLUE |
| MS0012 | BRASS |
| MS0065 | BRONZE |
| BR0000 | BROWN |
| CL0000 | CLEAR |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| NA0000 | NATURAL |
| LD0000 | OLIVE DRAB |
| RG0000 | ORANGE |
| RE0000 | RED |
| SL0000 | SILVER |
| TA0000 | TAN |
IF YOU ANSWER MRC HDCL, YOU MUST ANSWER MRC (HUES)
HDCL*JCOLOR DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,MANUFACTURERS REFERENCE,OR INDEX SYSTEM AND THE CLASIFICATION DESIGNATION, USED TO IDENTIFY COLOR, COLOR SELECTION, COLOR MATCHING AND QUALITY CONTROL OF A SPECIFIC COLOR.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(HDCLJEATEXT1234*;HDCLJEATEXT1234$$JEATEXT1234*;HDCLJEATEXT1234$JEATEXT1234*;HDCL1BJEATEXT1234*;HDCL1BJEATEXT1234$$JEATEXT1234*;HDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP93) | Reply |
| M | 10TH COLOR RESPONSE |
| N | 11TH COLOR RESPONSE |
| P | 12TH COLOR RESPONSE |
| Q | 13TH COLOR RESPONSE |
| R | 14TH COLOR RESPONSE |
| S | 15TH COLOR RESPONSE |
| T | 16TH COLOR RESPONSE |
| U | 17TH COLOR RESPONSE |
| W | 18TH COLOR RESPONSE |
| X | 19TH COLOR RESPONSE |
| B | 1ST COLOR RESPONSE |
| Y | 20TH COLOR RESPONSE |
| Z | 21ST COLOR RESPONSE |
| V | 22ND COLOR RESPONSE |
| C | 2ND COLOR RESPONSE |
| D | 3RD COLOR RESPONSE |
| E | 4TH COLOR RESPONSE |
| F | 5TH COLOR RESPONSE |
| H | 6TH COLOR RESPONSE |
| J | 7TH COLOR RESPONSE |
| K | 8TH COLOR RESPONSE |
| L | 9TH COLOR RESPONSE |
| G | ALL COLOR RESPONSE |
| A | SINGLE COLOR RESPONSE |
AKPV*AMOUNTING FACILITY QUANTITY
THE NUMBER OF MOUNTING FACILITIES PROVIDED.
Enter the numeric reply with a minimum of one digit.
(AKPVA10*)
CLMQ*JMOUNTING FACILITY DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE MOUNTING FACILITY,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CLMQJAC2.0*;CLMQJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable reply code from the table below
(THSDDEM)
| Table 1 |
| Reply Code (AH06) | Reply |
| AM | ACME |
| BA | BA |
| SM | ISO M |
| SS | ISO S |
| EM | M |
| MJ | MJ |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNIFIED NATIONAL FINE (UNJ) |
| JF | UNIFIED NATIONAL JOINT FINE (UNJF) |
| JC | UNJC |
| JE | UNJEF |
| JS | UNJS |
| NM | UNM |
| NS | UNS |
| WW | WHITWORTH |
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJXJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the alpha-numeric reply with a minimum of one character.
(CMLPAN3)
CQQR*BTHREAD PITCH IN MILLIMETERS
A MEASUREMENT OF DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CQQRB2.0)
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the alpha-numeric reply with a minimum of one character.
(AAJDAF7)
CTTC*JTHREAD TOLERANCE CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING ESTABLISHED PITCH AND CREST DIAMETER TOLERANCE POSITION AND GRADE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CTTCJEXT2.0*;CTTCJEXT2.0$$JEXT2.1*)
| Table 1 |
| Reply Code (AN73) | Reply |
| EXT | EXTERNAL |
| NTE | INTERNAL |
AAJE*JTHREAD PITCH DIAMETERS
THE MINIMUM AND MAXIMUM PITCH DIAMETER LIMITS OF A STRAIGHT SCREW THREAD.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AAJEJAM32.0/P50.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable reply code from the table below
(AAJFDAAL)
| Table 1 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
AASA*JTHREAD LENGTH
A MEASUREMENT OF THE EXTENT OF THREADS,INCLUDING INCOMPLETE THREADS,ALONG A LINE PARALLEL TO THE LONGITUDINAL AXIS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AASAJAA2.0*;AASAJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJLA2.0*;ABHPJLA2.0$$JLA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHC*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS. PLEASE USE MRC ABMK IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHCJAA2.0*;ABHCJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAC2.0*;ADAVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CXWZ*JOVERALL THICKNESS
AN OVERALL MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM, IN DISTINCTION FROM LENGTH OR WIDTH. PLEASE USE MRC ADUM IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CXWZJAC2.0*;CXWZJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDDER*;CBBLDFNY$$DDDN*)
| Table 1 |
| Reply Code (AN47) | Reply |
| ASQ | ADJUSTABLE |
| DDN | APERTURE |
| BZP | BOLT |
| AEQ | CASEHARDENED |
| DDP | CAST |
| DDQ | CLEVIS |
| DDR | CLOSED SLEEVE |
| DDS | COILED WIRE |
| DDT | CONCAVE WEARING SURFACE |
| DDU | CONVEX WEARING SURFACE |
| DDV | CORRUGATED |
| DDW | CORRUGATED INSIDE WALL |
| DDX | CORRUGATED WEARING SURFACE |
| DDY | COUNTERBORED APERATURE |
| DDZ | COUNTERSUNK |
| DEA | CUPLIKE CUSHION |
| DDM | CUSHION |
| DEB | DIVERGENT CORRUGATION |
| DEC | DOUBLE PRONG |
| DED | EYE SCREW ATTACHED TO HOOK EYE END |
| DEE | FLAT WEARING SURFACE |
| DEF | FORGED |
| DEG | FORMED |
| DEH | GRAND MASTER KEY DESIGN |
| DEJ | GROUPED PADLOCK |
| DEK | INDIVIDUAL GROUP MASTER KEY DESIGN |
| DEL | INDIVIDUAL PADLOCK MASTER KEY DESIGN |
| DEM | INDIVIDUALLY KEYED |
| DEN | INTERNAL THREAD LOCKING |
| DEP | KEYED ALIKE |
| DEQ | KEYWAY |
| DER | LAMINATED |
| DES | LEFT HAND |
| DET | METAL DISK ON INSIDE SURFACE BASE SECTION |
| DAV | NONADJUSTABLE |
| DEU | NONREMOVABLE |
| DEV | NOT CASEHARDENED |
| DEW | NOTCH |
| AFZ | NUT |
| DEX | OPEN SLEEVE |
| DEY | PAD |
| DEZ | PADLOCK EYE |
| DFA | PARALLEL CORRUGATION |
| DFB | PATCH PLATE KEYED ANTITURN |
| DFC | PLAIN EDGE |
| DFD | POLISHED |
| DFE | RECESSED APERTURE |
| DFF | REMOVABLE |
| DFG | RIGHT HAND |
| FNY | ROHS DIRECTIVE COMPLIANCE |
| DFH | SAWTOOTH EDGE |
| AGC | SCREW |
| CRE | SELF-LOCKING |
| DFJ | SERRATED LEAD ON TOP COIL |
| DFK | SINGLE PRONG |
| DFL | SMOOTH |
| DFM | SMOOTH WEARING SURFACE |
| DFN | SOLID |
| DFP | SPLIT DESIGN |
| DFQ | TRIPLE PRONG |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDPTA000*;PRMTDRHA000$DAGA000*;PRMTDRHA000$$DAGA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJAUA000R2.0*;PMWTJAUA000R2.0$$JAUA000R2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJRHA0002.0*;PMLCJRHA0002.0$JRHA0002.0*;PMLCJRHA0002.0$$JRHA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ012*;HZRDDHAZ011$$DHAZ042*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ042 | ASBESTOS |
| HAZ011 | CHROMIUM |
| HAZ012 | COPPER |
| HAZ029 | LEAD |
| HAZ052 | ZINC |
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information