An item consisting of a PEN(s), FOUNTAIN or PEN(s), BALL-POINT and a base with socket(s) or a dip type pen(s) and ink reservoir(s). The base socket(s) and ink reservoir opening(s) are designed to hold the pen(s) for ready use.
expandFSC Information
7520Office Devices and Accessories
expandColloquial Information
No Colloquials assigned to this Approve Item Name at this time
expandChange List
MRC AFJK has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED19789*)
ANBPDPEN POINT TYPE
INDICATES THE TYPE OF PEN POINT PROVIDED WITH THE ITEM.
Enter the applicable reply code from the table below
(ANBPDADA*;ANBPDAEA$DAFL*)
Table 1
Reply Code (AJ44)Reply
AANY ACCEPTABLE
AJVBALL POINT, TYPE NO. B12-03
AJWBALL POINT, TYPE NO. B12-04
AJXBALL POINT, TYPE NO. B12-05
AJYBALL POINT, TYPE NO. B12-09
AJZBALL POINT, TYPE NO. B12-10
AKABALL POINT, TYPE NO. B12-11
AKBBALL POINT, TYPE NO. B12-12
AKCBALL POINT, TYPE NO. B12-13
AKDBALL POINT, TYPE NO. B12-14
AKEBALL POINT, TYPE NO. B12-15
ABABOWL POINT, EXTRA FINE, FLEXIBLE, TYPE NO. C67
ABBBOWL-OVAL POINT, SPOON SHAPE, TYPE NO. B1
ABCBROAD
AKFBROAD, DOUBLE, TYPE NO. C12-13
AKGBROAD, DOUBLE, TYPE NO. C12-14
AKHBROAD, DOUBLE, TYPE NO. C12-15
AKJBROAD, DOUBLE, TYPE NO. C12-16
AKKBROAD, DOUBLE, TYPE NO. C12-17
AKLBROAD, DOUBLE, TYPE NO. C12-18
AKMBROAD, TYPE NO. C12-06
AKNBROAD, TYPE NO. C12-07
AKPBROAD, TYPE NO. C12-08
AKQBROAD, TYPE NO. C12-09
AKRBROAD, TYPE NO. C12-10
AKSBROAD, TYPE NO. C12-11
AKTBROAD, TYPE NO. C12-12
AKUCAPILLARY NIB, TYPE NO. A12-09
ABDCROW QUILL, FINE POINT, FLEXIBLE, TYPE NO. C5
ABECROW QUILL, FINE POINT, FLEXIBLE, TYPE NO. C6
ABFCROW QUILL, FINE POINT, LONG SHOULDER, TYPE NO. C3
ABGCROW QUILL, FINE POINT, SUPERFLEXIBLE, TYPE NO. C4
ABHCROW QUILL, SUPERFINE POINT, LONG SHOULDER, TYPE NO. C6
ABNEXTRA EXTRA FINE
ABJEXTRA FINE
ABKEXTRA FINE POINT, EXTRA FLEXIBLE, TYPE NO. C2
ABLEXTRA FINE POINT, FIRM, TYPE NO. B3
ABMEXTRA FINE POINT, FLEXIBLE, TYPE NO. C1
AKVEXTRA FINE POINT, TYPE NO. A12-02
AKWEXTRA FINE POINT, TYPE NO. A12-04
AKXEXTRA FINE POINT, TYPE NO. B12-01
ANYFIBERTIP, HARD
ANZFIBERTIP, SOFT
ABPFINE
ACAFINE POINT, EXTRA FLEXIBLE, SHORT NIB, TYPE NO. B7
AHSFINE POINT, FIRM
ACDFINE POINT, FIRM, LARGE INK CAPACITY, TYPE NO. B6
ACBFINE POINT, FIRM, SEMISLANT, TYPE NO. B5A
ACCFINE POINT, FIRM, SPOON SHAPE, TYPE NO. B20
ABSFINE POINT, FIRM, TYPE NO. B4
ABTFINE POINT, FIRM, TYPE NO. B5
ABWFINE POINT, FLEXIBLE, TYPE NO. B2
ABXFINE POINT, FLEXIBLE, TYPE NO. C8
ABYFINE POINT, TANK, TYPE NO. C57
ABRFINE POINT, TYPE NO. A1
AKYFINE POINT, TYPE NO. A12-03
AKZFINE POINT, TYPE NO. A12-05
ALAFINE POINT, TYPE NO. B12-02
ABZFINE, BALL POINT, TANK, TYPE NO. C59
ABQFINE, TYPE NO. D1
ALBFLAT POINT, TYPE NO. C12-19
ALCFLAT POINT, TYPE NO. C12-20
ALDFLAT POINT, TYPE NO. C12-21
ALEFLAT POINT, TYPE NO. C12-22
ALFFLAT POINT, TYPE NO. C12-23
ALGFLAT POINT, TYPE NO. C12-24
ALHFLAT POINT, TYPE NO. C12-25
ALJFLAT POINT, TYPE NO. C12-26
ALKFLAT POINT, TYPE NO. C12-27
ALLFLAT POINT, TYPE NO. C12-28
AHTFLAT WIDE POINT
ACEFLAT WIDE POINT, TYPE NO. C69
ACFFLAT WIDE POINT, TYPE NO. C70
ACGFLAT WIDE POINT, TYPE NO. C71
ACHFLAT WIDE POINT, TYPE NO. C72
ACJLETTERING
ALMLITHO NIB, TYPE NO. A12-08
ALNLONG-LIFE NIB, TYPE NO. A12-06
ALPLONG-LIFE NIB, TYPE NO. A12-07
ACKMEDIUM
ACSMEDIUM BALL POINT, TANK, TYPE NO. C60
ACMMEDIUM BROAD
ACWMEDIUM FINE POINT, ELASTIC, TYPE NO. B12
ACXMEDIUM FINE POINT, FIRM, TYPE NO. B11
ACNMEDIUM POINT, BANK, TYPE NO. B9
ACPMEDIUM POINT, FALCON, TYPE NO. B10
ACQMEDIUM POINT, FIRM, TYPE NO. B8
ACRMEDIUM POINT, FLEXIBLE, TYPE NO. B13
ACTMEDIUM POINT, TANK, TYPE NO. C58
ACLMEDIUM, TYPE NO. D2
AHWOBLONG POINT, SHADING NIB
ADGOBLONG POINT, SHADING NIB, LEFT HANDED, TYPE NO. C61
ADHOBLONG POINT, SHADING NIB, LEFT HANDED, TYPE NO. C62
ADJOBLONG POINT, SHADING NIB, LEFT HANDED, TYPE NO. C63
ADKOBLONG POINT, SHADING NIB, LEFT HANDED, TYPE NO. C64
ADLOBLONG POINT, SHADING NIB, LEFT HANDED, TYPE NO. C65
ACYOBLONG POINT, SHADING NIB, TYPE NO. C24
ACZOBLONG POINT, SHADING NIB, TYPE NO. C25
ADAOBLONG POINT, SHADING NIB, TYPE NO. C26
ADBOBLONG POINT, SHADING NIB, TYPE NO. C27
ADCOBLONG POINT, SHADING NIB, TYPE NO. C28
ADDOBLONG POINT, SHADING NIB, TYPE NO. C29
ADEOBLONG POINT, SHADING NIB, TYPE NO. C30
ADFOBLONG POINT, SHADING NIB, TYPE NO. C68
AHXOVAL POINT
AHZOVAL POINT, SHADING NIB
ADMOVAL POINT, SHADING NIB, TYPE NO. C31
ADNOVAL POINT, SHADING NIB, TYPE NO. C32
ADPOVAL POINT, SHADING NIB, TYPE NO. C33
ADQOVAL POINT, SHADING NIB, TYPE NO. C34
ADROVAL POINT, SHADING NIB, TYPE NO. C35
ADSOVAL POINT, SHADING NIB, TYPE NO. C36
ADTOVAL POINT, SHADING NIB, TYPE NO. C37
AHYOVAL-BULB MEDIUM POINT, LONG NIB
ADWOVAL-BULB MEDIUM POINT, LONG NIB, TYPE NO. B14
ALQPOINT WITH SHOULDER, TYPE NO. C12-01
ALRPOINT WITH SHOULDER, TYPE NO. C12-02
ALSPOINT WITH SHOULDER, TYPE NO. C12-03
ALTPOINT WITH SHOULDER, TYPE NO. C12-04
ALUPOINT WITH SHOULDER, TYPE NO. C12-05
AJAROUND POINT
AEPROUND POINT, 2 SPLITS, MUSIC WRITING, TYPE NO. B15
AEQROUND POINT, 3 SPLITS, MUSIC WRITING, TYPE NO. B16
AJBROUND POINT, FLICKER TYPE
AEEROUND POINT, FLICKER, TYPE NO. C49
AEFROUND POINT, FLICKER, TYPE NO. C50
AEGROUND POINT, FLICKER, TYPE NO. C51
AEHROUND POINT, FLICKER, TYPE NO. C52
AEJROUND POINT, FLICKER, TYPE NO. C53
AEKROUND POINT, FLICKER, TYPE NO. C54
AELROUND POINT, FLICKER, TYPE NO. C55
AEMROUND POINT, FLICKER, TYPE NO. C56
AENROUND POINT, MEDIUM, LAUNDRY-CLOTH WRITING, TYPE NO. B17
ALVROUND POINT, TYPE NO. B12-06
ALWROUND POINT, TYPE NO. B12-07
ALXROUND POINT, TYPE NO. B12-08
ADXROUND POINT, TYPE NO. C16
ADYROUND POINT, TYPE NO. C17
ADZROUND POINT, TYPE NO. C18
AEAROUND POINT, TYPE NO. C19
AEBROUND POINT, TYPE NO. C20
AECROUND POINT, TYPE NO. C21
AEDROUND POINT, TYPE NO. C23
ALYSHARP CORNER POINT, TYPE NO. B12-18
ALZSHARP CORNER POINT, TYPE NO. B12-19
AMASHARP CORNER POINT, TYPE NO. B12-20
AMBSHARP CORNER POINT, TYPE NO. B12-21
AMCSHARP CORNER POINT, TYPE NO. B12-22
AMDSHARP CORNER POINT, TYPE NO. B12-23
AMESHARP CORNER POINT, TYPE NO. B12-24
AMFSHARP CORNER POINT, TYPE NO. B12-25
AMGSHARP CORNER POINT, TYPE NO. B12-26
AMHSHARP CORNER POINT, TYPE NO. C12-29
AMJSHARP CORNER POINT, TYPE NO. C12-30
AMKSHARP CORNER POINT, TYPE NO. C12-31
AMLSHARP CORNER POINT, TYPE NO. C12-32
AMMSHARP CORNER POINT, TYPE NO. C12-33
AMNSHARP CORNER POINT, TYPE NO. C12-34
AMPSHARP CORNER POINT, TYPE NO. C12-35
AMQSHARP CORNER POINT, TYPE NO. C12-36
AMRSHARP CORNER POINT, TYPE NO. C12-37
AMSSHARP CORNER POINT, TYPE NO. C12-38
AMTSHARP CORNER POINT, TYPE NO. C12-39
AMUSHARP CORNER POINT, TYPE NO. C12-40
AMVSHARP CORNER POINT, TYPE NO. C12-41
AMWSHARP CORNER POINT, TYPE NO. C12-42
AMXSHARP CORNER POINT, TYPE NO. C12-43
AMYSHARP CORNER POINT, TYPE NO. C12-44
AMZSHARP CORNER POINT, TYPE NO. C12-45
ANASHARP CORNER POINT, TYPE NO. C12-46
ANBSHARP CORNER POINT, TYPE NO. C12-47
ANCSHARP CORNER POINT, TYPE NO. C12-48
ANDSHARP CORNER POINT, TYPE NO. C12-49
ANESHARP CORNER POINT, TYPE NO. C12-50
ANFSHARP CORNER POINT, TYPE NO. C12-51
ANGSHARP CORNER POINT, TYPE NO. C12-52
ANHSHARP CORNER POINT, TYPE NO. C12-53
ANJSHARP CORNER POINT, TYPE NO. C12-54
ANKSHARP CORNER POINT, TYPE NO. C12-55
ANLSHARP CORNER POINT, TYPE NO. C12-56
ANMSHARP CORNER POINT, TYPE NO. C12-57
ANNSHARP CORNER POINT, TYPE NO. C12-58
ANPSHARP CORNER POINT, TYPE NO. C12-59
ANQSHARP CORNER POINT, TYPE NO. C12-60
ANRSHARP CORNER POINT, TYPE NO. C12-61
ANSSHARP CORNER POINT, TYPE NO. C12-62
AFASHARP CORNER POINT, TYPE NO. C38
AFBSHARP CORNER POINT, TYPE NO. C39
AFCSHARP CORNER POINT, TYPE NO. C40
AFDSHARP CORNER POINT, TYPE NO. C41
AFESHARP CORNER POINT, TYPE NO. C42
AFFSHARP CORNER POINT, TYPE NO. C43
AFGSHARP CORNER POINT, TYPE NO. C44
AFHSHARP CORNER POINT, TYPE NO. C45
AFJSHARP CORNER POINT, TYPE NO. C46
AFKSHARP CORNER POINT, TYPE NO. C47
AFLSHARP CORNER POINT, TYPE NO. C48
AJCSQUARE POINT
AESSQUARE POINT, TYPE NO. C10
AETSQUARE POINT, TYPE NO. C11
AEWSQUARE POINT, TYPE NO. C12
AEXSQUARE POINT, TYPE NO. C13
AEYSQUARE POINT, TYPE NO. C14
AEZSQUARE POINT, TYPE NO. C15
ANTSTENOGRAPHIC POINT, TYPE NO. B12-27
AERSTUB
AFMSTUB POINT, FALCON, TYPE NO. B18
AFNSTUB POINT, LONG NIB, FLEXIBLE, TYPE NO. B19
ANUSTUB POINT, TYPE NO. B12-16
ANVSTUB POINT, TYPE NO. B12-17
ANWSTYLUS POINT, TYPE NO. B12-28
AFQSUPERFINE NO.1000
AJDSUPERFINE POINT
AFTSUPERFINE POINT, FIRM, SMALL NIB, EXTENDED SHOULDER, TYPE NO. C66
AFRSUPERFINE POINT, FLEXIBLE, SMALL NIB, TYPE NO. C7
AFSSUPERFINE POINT, SUPERFLEXIBLE, SMALL NIB, TYPE NO. C9
ANXSUPERFINE POINT, TYPE NO. A12-01
AFPSUPERFINE SUPERFLEXIBLE, TYPE NO. A2
AFWTWO CHANNEL MUSIC WRITING
AFXWIDE, TYPE NO. D3
IF STYLE/REPLY CODE(s) DRM WERE ENTERED FOR MRC BBMF, YOU MUST ANSWER MRC (BZHB)
IF STYLE/REPLY CODE(s) DRL OR DRN WERE ENTERED FOR MRC BBMF, YOU MUST ANSWER MRC (BZHC and BZHD)
BBMFDPEN TYPE
INDICATES THE TYPE OF PEN PROVIDED.
Enter the applicable reply code from the table below
(BBMFDDRM*;BBMFDDRN$$DDRL*)
Table 1
Reply Code (AK54)Reply
AANY ACCEPTABLE
DRLBALL POINT
DRMDIP
DRNFOUNTAIN
BZHB*ARESERVOIR QUANTITY
THE NUMBER OF RESERVOIRS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BZHBA10*)
BZHC*ABASE SOCKET QUANTITY
THE NUMBER OF BASE SOCKETS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BZHCA10*)
BZHD*DHINGED BASE SOCKET
AN INDICATION OF WHETHER OR NOT A HINGED BASE SOCKET(S) IS PROVIDED.
Enter the applicable reply code from the table below
(BZHDDC)
Table 1
Reply Code (AB22)Reply
CNOT PROVIDED
BPROVIDED
HUESDCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDMS0074*;HUESDBU0029$DRE0000*;HUESDBU0029$$DRE0000*)
Table 1
Reply Code (AD06)Reply
AL0000ALUMINUM
AANY ACCEPTABLE
BL0000BLACK
BL0002BLACK, BLUE
BU0000BLUE
BU0053BLUE INDIGO
BU0005BLUE, DARK
BU0026BLUE, LIGHT
BU0073BLUE, LIGHT, MIL-I-6903
BU0029BLUE, MEDIUM
BU0047BLUE, SKY
BR0000BROWN
BR0139BROWN, SIENNA
RE0047CARMINE
MS0073CHROME
RE0012CRIMSON
BU0056CYAN
GL0000GOLD
GY0002GRAY, LIGHT
GY0000GRAY/GREY
GR0000GREEN
GR0083GREEN, GRASS
GR0011GREEN, OLIVE
MS0033LILAC
MS0034MAGENTA
NA0000NATURAL
RG0000ORANGE
RG0054ORANGE, OCHRE
RG0001ORANGE-RED
PK0000PINK
PU0000PURPLE
RE0000RED
RE0006ROSE
RE0022SCARLET
SL0000SILVER
MS0056TERRA COTTA
RE0063VERMILLION
VL0000VIOLET
WH0000WHITE
MS0074WOOD, NATURAL
YE0000YELLOW
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
Table 1
Reply Code (AC28)Reply
ASPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BSTANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
CDRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
Table 1
Reply Code (AN62)Reply
VFEDERAL MOTOR VEHICLE SAFETY STANDARD
FFLAMMABILITY STANDARD
SGOVERNMENT SPECIFICATION
TGOVERNMENT STANDARD
UINTERNATIONAL STD/SPEC
DMANUFACTURERS SOURCE CONTROL
RMANUFACTURERS SPECIFICATION
NMANUFACTURERS SPECIFICATION CONTROL
MMANUFACTURERS STANDARD
BNATIONAL STD/SPEC
APROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
PPROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
Table 1
Reply Code (AD08)Reply
ALALLOY
BEANNEALED
ANANNEX
APAPPENDIX
ACAPPLICABILITY CLASS
ARARRANGEMENT
ASASSEMBLY
ABASSORTMENT
BFBOND
BXBOX
CYCAPACITY
CACASE
CTCATEGORY
CFCIRCUMFERENCE
CLCLASS
CECODE
CRCOLOR
CCCOMBINATION CODE
CNCOMPONENT
CPCOMPOSITION
CMCOMPOUND
CDCONDITION
AVCONFIGURATION
CSCONSTRUCTION
BGCORE CONDITION
CBCUT OFF
AMDELAY CLASS
DEDESIGN
DGDESIGNATOR
DWDRAWING NUMBER
DUDUPLEX
EGEDGE
ENEND
FYFAMILY
FGFIGURE
AKFILE NUMBER
FNFINISH
FBFLAVOR
BHFLUX PERCENTAGE
FMFORM
FAFORMULA
AJGAGE STOCK NUMBER
GRGRADE
GAGRADUATION
AXGRANULES
AYGRIT
GBGROUND
GPGROUP
HAHEAVY DUTY
BAIMAGE COLOR
NSINSERT
TMITEM
KDKIND
KTKIT
LGLENGTH
LVLEVEL
LTLIMIT
MKMARK
AAMARKER
ADMASK APERTURE
MLMATERIAL
BBMAXIMUM DENSITY
TAMEDIUM TEMPER
MHMESH
MEMETHOD
BCMINIMUM DENSITY
MDMODEL
MTMOUNTING
AQNATURAL
AUNON-DELAY CLASS
NRNUMBER
BLOUTFIT NUMBER
PAPARAGRAPH
PTPART
PNPATTERN
PCPHYSICAL CONDITION
PSPIECE
PLPLAN
PRPOINT
PDPOLISHED
PBPRESSURE RATING
QAQUALITY
QBQUENCHED
RNRANGE
AERAPID
RTRATING
RFREFERENCE NUMBER
RAREGULAR DUTY
BJRMA FLUX
SJSALIENT CHARACTERISTICS
SCSCHEDULE
SBSECTION
SLSELECTION
BDSERIALIZED
SESERIES
SVSERVICE
SXSET
SASHADE
SHSHAPE
SGSHEET
SZSIZE
AGSLOW
TCSOFT TEMPER
SKSOURCE
PZSPECIES
SQSPECIFICATION SHEET
SDSPEED
AWSTANDARD
SRSTRAIGHT
STSTYLE
SSSUBCLASS
SFSUBFORM
SPSUBTYPE
BKSUPPORT
SNSURFACE CONDITION
SYSYMBOL
SMSYSTEM
TBTABLE
TNTANNAGE
TPTEMPER
TXTEXTURE
TKTHICKNESS
TTTREATMENT
TRTRIM
TYTYPE
YNUNIT
AZUNSERIALIZED
VAVARIETY
WTWEIGHT
WDWIDTH
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDE3*;ENACDE6$$DGQ*)
Table 1
Reply Code (EN02)Reply
E3COMPREHENSIVE PROCUREMENT GUIDELINE - NON-PAPER OFFICE PRODUCTS - PLASTIC DESKTOP ACCESSORIES
E6COMPREHENSIVE PROCUREMENT GUIDELINE - NON-PAPER OFFICE PRODUCTS - PRINTER RIBBONS
GQLOW VOLATILE ORGANIC COMPOUND - HOUSEHOLD CONSUMER PRODUCTS
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
Table 1
Reply Code (AN58)Reply
AADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAQ8)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
EPPC*DENVIRONMENTALLY PREFERRED PRODUCT CERTIFICATION TYPE
INDICATES THE TYPE OF CERTIFICATION INDICATING THE ITEM IS AN ENVIRONMENTALLY PREFERRED PRODUCT.
Enter the applicable reply code from the table below
(EPPCDAA*;EPPCDAB$$DAB*)
Table 1
Reply Code (EN01)Reply
AATHIRD PARTY CERTIFICATION
ABUNVERIFIED SELF-CERTIFICATION
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)