A length of HOSE, AIR DUCT with couplings on one or both ends. Excludes:items which include a branch hose or fork hose, HOSE ASSEMBLY, NONMETALLIC.
Reply PCAP00 added to MRC MATT.
Reply PCAW00 added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AUO added to MRC MATT.
ISAC Reply 3BAH added to MRC MATT.
ISAC Reply 3BBL added to MRC MATT.
ISAC Reply 3ERF added to MRC MATT.
ISAC Reply 3ERG added to MRC MATT.
ISAC Reply 3ERH added to MRC MATT.
ISAC Reply 3ERI added to MRC MATT.
ISAC Reply 3ERJ added to MRC MATT.
ISAC Reply 3ERK added to MRC MATT.
ISAC Reply 3ERL added to MRC MATT.
ISAC Reply 3ERP added to MRC MATT.
ISAC Reply 3ERQ added to MRC MATT.
ISAC Reply 3ERR added to MRC MATT.
ISAC Reply 3ERS added to MRC MATT.
ISAC Reply 3ERT added to MRC MATT.
ISAC Reply 3ERU added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 1F deleted from MRC MATT.
ISAC Reply 1G deleted from MRC MATT.
ISAC Reply 1H deleted from MRC MATT.
ISAC Reply 1J deleted from MRC MATT.
ISAC Reply 1K deleted from MRC MATT.
ISAC Reply 1L deleted from MRC MATT.
ISAC Reply 1M deleted from MRC MATT.
ISAC Reply 1N deleted from MRC MATT.
ISAC Reply 1P deleted from MRC MATT.
ISAC Reply 1Q deleted from MRC MATT.
ISAC Reply 1R deleted from MRC MATT.
ISAC Reply 1S deleted from MRC MATT.
ISAC Reply 1T deleted from MRC MATT.
ISAC Reply 1U deleted from MRC MATT.
ISAC Reply 1V deleted from MRC MATT.
ISAC Reply 1W deleted from MRC MATT.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3AUO added to MRC MDCL.
ISAC Reply 3BAH added to MRC MDCL.
ISAC Reply 3BBL added to MRC MDCL.
ISAC Reply 3ERF added to MRC MDCL.
ISAC Reply 3ERG added to MRC MDCL.
ISAC Reply 3ERH added to MRC MDCL.
ISAC Reply 3ERI added to MRC MDCL.
ISAC Reply 3ERJ added to MRC MDCL.
ISAC Reply 3ERK added to MRC MDCL.
ISAC Reply 3ERL added to MRC MDCL.
ISAC Reply 3ERP added to MRC MDCL.
ISAC Reply 3ERQ added to MRC MDCL.
ISAC Reply 3ERR added to MRC MDCL.
ISAC Reply 3ERS added to MRC MDCL.
ISAC Reply 3ERT added to MRC MDCL.
ISAC Reply 3ERU added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 1A deleted from MRC MDCL.
ISAC Reply 1B deleted from MRC MDCL.
ISAC Reply 1C deleted from MRC MDCL.
ISAC Reply 1D deleted from MRC MDCL.
ISAC Reply 1E deleted from MRC MDCL.
ISAC Reply 1F deleted from MRC MDCL.
ISAC Reply 1G deleted from MRC MDCL.
ISAC Reply 1H deleted from MRC MDCL.
ISAC Reply 1J deleted from MRC MDCL.
ISAC Reply 1K deleted from MRC MDCL.
ISAC Reply 1L deleted from MRC MDCL.
ISAC Reply 1M deleted from MRC MDCL.
ISAC Reply 1N deleted from MRC MDCL.
ISAC Reply 1P deleted from MRC MDCL.
ISAC Reply 1Q deleted from MRC MDCL.
ISAC Reply 1R deleted from MRC MDCL.
ISAC Reply 1S deleted from MRC MDCL.
ISAC Reply 1T deleted from MRC MDCL.
ISAC Reply 1U deleted from MRC MDCL.
ISAC Reply 1V deleted from MRC MDCL.
ISAC Reply 1W deleted from MRC MDCL.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3ERF added to MRC SFTT.
ISAC Reply 3ERI added to MRC SFTT.
ISAC Reply 3ERP added to MRC SFTT.
ISAC Reply 3ERQ added to MRC SFTT.
ISAC Reply 3ERU added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1C deleted from MRC SFTT.
ISAC Reply 1D deleted from MRC SFTT.
ISAC Reply 1E deleted from MRC SFTT.
ISAC Reply 1F deleted from MRC SFTT.
ISAC Reply 1G deleted from MRC SFTT.
ISAC Reply 1H deleted from MRC SFTT.
ISAC Reply 1J deleted from MRC SFTT.
ISAC Reply 1K deleted from MRC SFTT.
ISAC Reply 1L deleted from MRC SFTT.
ISAC Reply 1M deleted from MRC SFTT.
ISAC Reply 1N deleted from MRC SFTT.
ISAC Reply 1P deleted from MRC SFTT.
ISAC Reply 1Q deleted from MRC SFTT.
ISAC Reply 1R deleted from MRC SFTT.
ISAC Reply 1S deleted from MRC SFTT.
ISAC Reply 1T deleted from MRC SFTT.
ISAC Reply 1U deleted from MRC SFTT.
ISAC Reply 1V deleted from MRC SFTT.
ISAC Reply 1W deleted from MRC SFTT.
ISAC Reply 3AEE added to MRC STDC.
ISAC Reply 3ERF added to MRC STDC.
ISAC Reply 3ERI added to MRC STDC.
ISAC Reply 3ERP added to MRC STDC.
ISAC Reply 3ERQ added to MRC STDC.
ISAC Reply 3ERU added to MRC STDC.
ISAC Reply 3HOU added to MRC STDC.
ISAC Reply 1A deleted from MRC STDC.
ISAC Reply 1B deleted from MRC STDC.
ISAC Reply 1C deleted from MRC STDC.
ISAC Reply 1D deleted from MRC STDC.
ISAC Reply 1E deleted from MRC STDC.
ISAC Reply 1F deleted from MRC STDC.
ISAC Reply 1G deleted from MRC STDC.
ISAC Reply 1H deleted from MRC STDC.
ISAC Reply 1J deleted from MRC STDC.
ISAC Reply 1K deleted from MRC STDC.
ISAC Reply 1L deleted from MRC STDC.
ISAC Reply 1M deleted from MRC STDC.
ISAC Reply 1N deleted from MRC STDC.
ISAC Reply 1P deleted from MRC STDC.
ISAC Reply 1Q deleted from MRC STDC.
ISAC Reply 1R deleted from MRC STDC.
ISAC Reply 1S deleted from MRC STDC.
ISAC Reply 1T deleted from MRC STDC.
ISAC Reply 1U deleted from MRC STDC.
ISAC Reply 1V deleted from MRC STDC.
ISAC Reply 1W deleted from MRC STDC.
ISAC Reply 3AEE added to MRC AARX.
ISAC Reply 3AET added to MRC AARX.
ISAC Reply 3AEU added to MRC AARX.
ISAC Reply 3AEV added to MRC AARX.
ISAC Reply 3HOU added to MRC AARX.
ISAC Reply 1A deleted from MRC AARX.
ISAC Reply 1B deleted from MRC AARX.
ISAC Reply 1X deleted from MRC AARX.
ISAC Reply 3AEE added to MRC ABKV.
ISAC Reply 3AET added to MRC ABKV.
ISAC Reply 3AEU added to MRC ABKV.
ISAC Reply 3AEV added to MRC ABKV.
ISAC Reply 3EFE added to MRC ABKV.
ISAC Reply 3EFF added to MRC ABKV.
ISAC Reply 3HOU added to MRC ABKV.
ISAC Reply 1A deleted from MRC ABKV.
ISAC Reply 1B deleted from MRC ABKV.
ISAC Reply 1X deleted from MRC ABKV.
ISAC Reply 3AEE added to MRC ADJT.
ISAC Reply 3AET added to MRC ADJT.
ISAC Reply 3AEV added to MRC ADJT.
ISAC Reply 3HOU added to MRC ADJT.
ISAC Reply 1A deleted from MRC ADJT.
ISAC Reply 1B deleted from MRC ADJT.
ISAC Reply 1X deleted from MRC ADJT.
ISAC Reply 3AEE added to MRC ADJU.
ISAC Reply 3AET added to MRC ADJU.
ISAC Reply 3AEU added to MRC ADJU.
ISAC Reply 3AEV added to MRC ADJU.
ISAC Reply 3HOU added to MRC ADJU.
ISAC Reply 1A deleted from MRC ADJU.
ISAC Reply 1B deleted from MRC ADJU.
ISAC Reply 1X deleted from MRC ADJU.
ISAC Reply 3AEE added to MRC ADJV.
ISAC Reply 3AET added to MRC ADJV.
ISAC Reply 3AEU added to MRC ADJV.
ISAC Reply 3AEV added to MRC ADJV.
ISAC Reply 3HOU added to MRC ADJV.
ISAC Reply 1A deleted from MRC ADJV.
ISAC Reply 1B deleted from MRC ADJV.
ISAC Reply 1X deleted from MRC ADJV.
ISAC Reply 3AEE added to MRC ADJW.
ISAC Reply 3AET added to MRC ADJW.
ISAC Reply 3AEU added to MRC ADJW.
ISAC Reply 3AEV added to MRC ADJW.
ISAC Reply 3HOU added to MRC ADJW.
ISAC Reply 1A deleted from MRC ADJW.
ISAC Reply 1B deleted from MRC ADJW.
ISAC Reply 1X deleted from MRC ADJW.
ISAC Reply 3AEE added to MRC AWLS.
ISAC Reply 3AET added to MRC AWLS.
ISAC Reply 3AEU added to MRC AWLS.
ISAC Reply 3AEV added to MRC AWLS.
ISAC Reply 3HOU added to MRC AWLS.
ISAC Reply 1A deleted from MRC AWLS.
ISAC Reply 1B deleted from MRC AWLS.
ISAC Reply 1X deleted from MRC AWLS.
ISAC Reply 3AEE added to MRC AHNC.
ISAC Reply 3AET added to MRC AHNC.
ISAC Reply 3AEU added to MRC AHNC.
ISAC Reply 3AEV added to MRC AHNC.
ISAC Reply 3HOU added to MRC AHNC.
ISAC Reply 1A deleted from MRC AHNC.
ISAC Reply 1B deleted from MRC AHNC.
ISAC Reply 1X deleted from MRC AHNC.
ISAC Reply 3AEE added to MRC CPYG.
ISAC Reply 3AET added to MRC CPYG.
ISAC Reply 3AEU added to MRC CPYG.
ISAC Reply 3AEV added to MRC CPYG.
ISAC Reply 3HOU added to MRC CPYG.
ISAC Reply 1A deleted from MRC CPYG.
ISAC Reply 1B deleted from MRC CPYG.
ISAC Reply 1X deleted from MRC CPYG.
ISAC Reply 3AEE added to MRC CPYH.
ISAC Reply 3AET added to MRC CPYH.
ISAC Reply 3AEV added to MRC CPYH.
ISAC Reply 3HOU added to MRC CPYH.
ISAC Reply 1A deleted from MRC CPYH.
ISAC Reply 1B deleted from MRC CPYH.
ISAC Reply 1X deleted from MRC CPYH.
ISAC Reply 3AEE added to MRC CPYL.
ISAC Reply 3AET added to MRC CPYL.
ISAC Reply 3AEV added to MRC CPYL.
ISAC Reply 3HOU added to MRC CPYL.
ISAC Reply 1A deleted from MRC CPYL.
ISAC Reply 1B deleted from MRC CPYL.
ISAC Reply 1X deleted from MRC CPYL.
ISAC Reply 3AEE added to MRC AGQM.
ISAC Reply 3AET added to MRC AGQM.
ISAC Reply 3AEU added to MRC AGQM.
ISAC Reply 3AEV added to MRC AGQM.
ISAC Reply 3HOU added to MRC AGQM.
ISAC Reply 1A deleted from MRC AGQM.
ISAC Reply 1B deleted from MRC AGQM.
ISAC Reply 1X deleted from MRC AGQM.
ISAC Reply 3AEE added to MRC CXMG.
ISAC Reply 3AET added to MRC CXMG.
ISAC Reply 3AEU added to MRC CXMG.
ISAC Reply 3AEV added to MRC CXMG.
ISAC Reply 3HOU added to MRC CXMG.
ISAC Reply 1A deleted from MRC CXMG.
ISAC Reply 1B deleted from MRC CXMG.
ISAC Reply 1X deleted from MRC CXMG.
ISAC Reply 3AEE added to MRC CXMJ.
ISAC Reply 3AET added to MRC CXMJ.
ISAC Reply 3AEU added to MRC CXMJ.
ISAC Reply 3AEV added to MRC CXMJ.
ISAC Reply 3HOU added to MRC CXMJ.
ISAC Reply 1A deleted from MRC CXMJ.
ISAC Reply 1B deleted from MRC CXMJ.
ISAC Reply 1X deleted from MRC CXMJ.
ISAC Reply 3AEE added to MRC THSD.
ISAC Reply 3AEV added to MRC THSD.
ISAC Reply 3HOU added to MRC THSD.
ISAC Reply 1A deleted from MRC THSD.
ISAC Reply 1B deleted from MRC THSD.
ISAC Reply 1X deleted from MRC THSD.
ISAC Reply 3AEE added to MRC CQJX.
ISAC Reply 3AET added to MRC CQJX.
ISAC Reply 3AEV added to MRC CQJX.
ISAC Reply 3HOU added to MRC CQJX.
ISAC Reply 1A deleted from MRC CQJX.
ISAC Reply 1B deleted from MRC CQJX.
ISAC Reply 1X deleted from MRC CQJX.
ISAC Reply 3AEE added to MRC CMLP.
ISAC Reply 3AET added to MRC CMLP.
ISAC Reply 3AEV added to MRC CMLP.
ISAC Reply 3HOU added to MRC CMLP.
ISAC Reply 1A deleted from MRC CMLP.
ISAC Reply 1B deleted from MRC CMLP.
ISAC Reply 1X deleted from MRC CMLP.
ISAC Reply 3AEE added to MRC CQQR.
ISAC Reply 3AEV added to MRC CQQR.
ISAC Reply 3HOU added to MRC CQQR.
ISAC Reply 1A deleted from MRC CQQR.
ISAC Reply 1B deleted from MRC CQQR.
ISAC Reply 1X deleted from MRC CQQR.
ISAC Reply 3AEE added to MRC CTTC.
ISAC Reply 3AEV added to MRC CTTC.
ISAC Reply 3HOU added to MRC CTTC.
ISAC Reply 1A deleted from MRC CTTC.
ISAC Reply 1B deleted from MRC CTTC.
ISAC Reply 1X deleted from MRC CTTC.
ISAC Reply 3AEE added to MRC AAJD.
ISAC Reply 3AET added to MRC AAJD.
ISAC Reply 3AEV added to MRC AAJD.
ISAC Reply 3HOU added to MRC AAJD.
ISAC Reply 1A deleted from MRC AAJD.
ISAC Reply 1B deleted from MRC AAJD.
ISAC Reply 1X deleted from MRC AAJD.
ISAC Reply 3AEE added to MRC AAJE.
ISAC Reply 3AEV added to MRC AAJE.
ISAC Reply 3HOU added to MRC AAJE.
ISAC Reply 1A deleted from MRC AAJE.
ISAC Reply 1B deleted from MRC AAJE.
ISAC Reply 1X deleted from MRC AAJE.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED18451*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3ERLDPCCD00*;MATT3ERLDPCCD00$DPCAJ00*;MATT3ERLDPCCD00$$DPCAJ00*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AUO | LINER |
| 3BAH | TAPE |
| 3BBL | COVER |
| 3ERF | ALL PLIES |
| 3ERG | SINGLE PLY |
| 3ERH | FIRST PLY |
| 3ERI | SECOND PLY |
| 3ERJ | THIRD PLY |
| 3ERK | FOURTH PLY |
| 3ERL | FIFTH PLY |
| 3ERP | FIRST END COUPLING |
| 3ERQ | SECOND END COUPLING |
| 3ERR | REINFORCING CORD |
| 3ERS | REINFORCING WIRE |
| 3ERT | SCUFF STRIP |
| 3ERU | BOTH END COUPLINGS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| ASA000 | ASBESTOS |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CCA000 | COTTON |
| FG0000 | FIBERGLASS |
| GSA000 | GLASS |
| FEA000 | IRON |
| FEF000 | IRON ALLOY |
| PBA000 | LEAD |
| LRA000 | LEATHER |
| MGB000 | MAGNESIUM ALLOY |
| PPA000 | PAPER |
| PCA000 | PLASTIC |
| PCD000 | PLASTIC ACRYLIC |
| PCCX00 | PLASTIC ARAMID |
| PCAN00 | PLASTIC CELLULOSE ACETATE |
| PCBJ00 | PLASTIC CELLULOSE NITRATE |
| PCBR00 | PLASTIC FLUORINATED ETHYLENE PROPYLENE |
| PCAAE0 | PLASTIC FLUOROSILICONE |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCCD00 | PLASTIC POLYVINYL |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCAW00 | PLASTIC TETRAFLUOROETHYLENE |
| PCAP00 | PLASTIC VINYL |
| RSD000 | RESIN |
| RCE000 | RUBBER |
| RCAD00 | RUBBER BUTADIENE NITRILE |
| RC0019 | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| RC0022 | RUBBER BUTADIENE-STYRENE CLASS SBR |
| RCT000 | RUBBER BUTYL |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RC0009 | RUBBER ETHYLENE-PROPYLENE CLASS EPM |
| RC0013 | RUBBER FLUOROCARBON CLASS FPM |
| RC0017 | RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR |
| RCA000 | RUBBER NATURAL |
| RCAC00 | RUBBER NEOPRENE |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| STC000 | STEEL STAINLESS - USE STB000 |
| TTB000 | TITANIUM |
| TTA000 | TITANIUM ALLOY |
| WLA000 | WOOL |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AUO | LINER |
| 3BAH | TAPE |
| 3BBL | COVER |
| 3ERF | ALL PLIES |
| 3ERG | SINGLE PLY |
| 3ERH | FIRST PLY |
| 3ERI | SECOND PLY |
| 3ERJ | THIRD PLY |
| 3ERK | FOURTH PLY |
| 3ERL | FIFTH PLY |
| 3ERP | FIRST END COUPLING |
| 3ERQ | SECOND END COUPLING |
| 3ERR | REINFORCING CORD |
| 3ERS | REINFORCING WIRE |
| 3ERT | SCUFF STRIP |
| 3ERU | BOTH END COUPLINGS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3ERFDVAA000*;SFTT3ERFDVAA000$DENA000*;SFTT3ERFDVAA000$$DENA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ERF | ALL PLIES |
| 3ERI | SECOND PLY |
| 3ERP | FIRST END COUPLING |
| 3ERQ | SECOND END COUPLING |
| 3ERU | BOTH END COUPLINGS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| ENA000 | ENAMEL |
| ENF000 | ENAMEL SEMIGLOSS |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ERF | ALL PLIES |
| 3ERI | SECOND PLY |
| 3ERP | FIRST END COUPLING |
| 3ERQ | SECOND END COUPLING |
| 3ERU | BOTH END COUPLINGS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLA1)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAH1289 | A1 | BOX SECTION |
| DQ01200 | A10 | SEMI-CIRCLE |
| AAH1290 | A2 | FULLY CONVOLUTED |
| AAH1291 | A3 | FULLY CONVOLUTED W/ WIRE RINGS BETWEEN CONVOLUTIONS |
| AAH1292 | A4 | HELICALLY WOUND CONTINOUS WIRE SUPPORTED |
| AAH1293 | A5 | SLEEVE SECTION |
| AAH1294 | A6 | BEAD REINFORCED |
| AAH1295 | A7 | PERFORATED |
| AAH1296 | A8 | BALL AND SOCKET |
| AAH1297 | A9 | INTERLOCKING, ADJUSTABLE DIAMETER |
IF STYLE/REPLY CODE(s) B1 OR B2 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADJT and ADJU and ADJW and ADJV)
IF STYLE/REPLY CODE(s) B3 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (AARX and ABKV)
IF STYLE/REPLY CODE(s) B4 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADJT and ADJV)
IF STYLE/REPLY CODE(s) B5 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADJT and ADJV and AARX and ABKV)
AAGRLCROSS-SECTIONAL SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE CROSS-SECTIONAL SHAPE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAGRLB4)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAH1298 | B1 | OVAL |
| AAH1299 | B2 | RECTANGULAR |
| AAH1300 | B3 | ROUND |
| AAH1301 | B4 | SQUARE |
| DQ01201 | B5 | SEMI-CIRCLE |
AARX*JINSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AARX3AETJAC2.0*;AARX3AETJAC2.0$JAC2.0*;AARX3AETJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKV*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKV3EFEJAB2.0*;ABKV3EFEJAB2.0$JAB2.0*;ABKV3EFEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EFE | BETWEEN FIRST AND SECOND GEAR |
| 3EFF | BETWEEN SECOND AND THIRD GEAR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJT*JINSIDE WIDTH
AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJT3AETJAB2.0*;ADJT3AETJAB2.0$JAB2.0*;ADJT3AETJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJU*JINSIDE LENGTH
A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJU3AEEJAB2.0*;ADJU3AEEJAB2.0$JAB2.0*;ADJU3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJV*JOUTSIDE WIDTH
AN OUTSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJV3AEEJAB2.0*;ADJV3AEEJAB2.0$JAB2.0*;ADJV3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJW*JOUTSIDE LENGTH
A MEASUREMENT OF THE LONGEST OUTSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJW3AEUJAC2.0*;ADJW3AEUJAC2.0$JAC2.0*;ADJW3AEUJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AAGT*JWALL THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF THE WALL,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAGTJAB2.0*;AAGTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CRXX*JMEASURING METHOD AND LENGTH
THE MEANS USED AND THE MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRXXJFCRL2.0*;CRXXJFCRL2.0$$JFCRL2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AN68) | Reply |
| EX | EXCLUDING END FITTINGS |
| XW | EXTENDED WORKING |
| RL | OVERALL |
| RN | RANDOM |
| WK | WORKING |
IF STYLE/REPLY CODE(s) AAG, ACT, ACU OR ACV WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (CXMG)
AWLS*DCONNECTION TYPE
INDICATES THE TYPE OF CONNECTION/S/.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AWLS3AEUDACW*;AWLS3AEUDACW$DACV*;AWLS3AEUDACW$$DACV*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB76) | Reply |
| ACU | COUPLING |
| ACV | FLANGE |
| ABN | PLAIN |
| ACW | PREFORMED |
| ACX | SOFT |
| AAG | THREADED |
| ACT | UNTHREADED EXTERNAL TUBE |
IF STYLE/REPLY CODE(s) C1 OR C2 WERE ENTERED FOR MRC AHNC, YOU MUST ANSWER MRC (CPYL and CPYH and AGQM)
IF STYLE/REPLY CODE(s) C3 WERE ENTERED FOR MRC AHNC, YOU MUST ANSWER MRC (CPYG and AGQM)
IF STYLE/REPLY CODE(s) C4 WERE ENTERED FOR MRC AHNC, YOU MUST ANSWER MRC (CPYH and AGQM)
IF STYLE/REPLY CODE(s) C5 WERE ENTERED FOR MRC AHNC, YOU MUST ANSWER MRC (CPYG and CPYH and AGQM)
AHNC*LCONNECTION STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE CONNECTION.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(AHNC3AETLC1*;AHNC3AETLC1$LC2*;AHNC3AETLC1$$LC2*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAH1302 | C1 | OVAL |
| AAH1303 | C2 | RECTANGULAR |
| AAH1304 | C3 | ROUND |
| AAH1305 | C4 | SQUARE |
| DQ01203 | C5 | SEMI-CIRCLE |
CPYG*JEND INSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE END,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CPYG3AEEJAB2.0*;CPYG3AEEJAB2.0$JAB2.0*;CPYG3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CPYH*JEND INSIDE WIDTH
AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE END,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CPYH3AEVJAB2.0*;CPYH3AEVJAB2.0$JAB2.0*;CPYH3AEVJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CPYL*JEND INSIDE LENGTH
A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF THE END,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CPYL3AEVJAB2.0*;CPYL3AEVJAB2.0$JAB2.0*;CPYL3AEVJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGQM*JEND OVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGQM3AEVJAB2.0*;AGQM3AEVJAB2.0$JAB2.0*;AGQM3AEVJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) D5, D6 OR D7 WERE ENTERED FOR MRC CXMG, YOU MUST ANSWER MRC (CXMJ)
IF STYLE/REPLY CODE(s) D8 OR D9 WERE ENTERED FOR MRC CXMG, YOU MUST ANSWER MRC (THSD)
CXMG*LCOUPLING STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE COUPLING.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(CXMG3AEULD17*;CXMG3AEULD17$LD21*;CXMG3AEULD17$$LD21*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAH1306 | D1 | BEADED |
| AAH1315 | D10 | EXTERNAL QUICK-DISCONNECT |
| AAH1316 | D11 | INTERNAL QUICK-DISCONNECT |
| AAH1317 | D12 | SELF-LOCKING EXTERNAL CONNECTOR (NOTE: APPLICABLE TO HOSE ASSEMBLY, AIR BREATHING ONLY.) |
| AAH1318 | D13 | SELF-LOCKING INTERNAL CONNECTOR (NOTE: APPLICABLE TO HOSE ASSEMBLY, AIR BREATHING ONLY.) |
| AAH1319 | D14 | CONNECTOR, OXYGEN HOSE TO REGULATOR (NOTE: APPLICABLE TO HOSE ASSEMBLY, AIR BREATHING ONLY.) |
| AAH1320 | D15 | CONNECTOR, OXYGEN HOSE TO REGULATOR W/ CLIP (NOTE: APPLICABLE TO HOSE ASSEMBLY, AIR BREATHING ONLY.) |
| AAH1321 | D16 | OXYGEN HOSE CLAMP |
| AAH1322 | D17 | INTERNAL COUPLING CLAMP-LOCKING |
| AAH1323 | D18 | EXTERNAL COUPLING CLAMP-LOCKING |
| AAH1324 | D19 | INTERNAL COUPLING SELF-LOCKING |
| AAH1307 | D2 | PLAIN FLANGE |
| AAH1325 | D20 | EXTERNAL COUPLING SELF-LOCKING |
| DQ01202 | D21 | SEMI-CIRCLE |
| AAH1308 | D3 | RAISED FACE FLANGE |
| AAH1309 | D4 | RECESSED FLANGE |
| AAH1310 | D5 | TWIST-LOCK W/LOCKING OPENINGS |
| AAH1311 | D6 | TWIST-LOCK W/INTERNAL LOCKING CAMS |
| AAH1312 | D7 | TWIST-LOCK W/EXTERNAL LOCKING CAMS |
| AAH1313 | D8 | THREADED EXTERNAL |
| AAH1314 | D9 | THREADED INTERNAL |
CXMJ*ACOUPLING LOCKING DEVICE QUANTITY
THE NUMBER OF LOCKING DEVICES ON THE COUPLING.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(CXMJ3AEVA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(THSD3AEVDFP*;THSD3AEVDFP$DPF*;THSD3AEVDFP$$DPF*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| AM | ACME |
| AG | ACME G |
| AN | ANPT |
| BF | BRITISH STANDARD FINE (BSF) |
| BW | BRITISH STANDARD WHITWORTH (BSW) |
| ZP | BSP. L |
| DQ | BSP.C |
| PL | BSP.PL |
| BS | BSP.TR EXT |
| BR | BSP.TR INT |
| TT | BUTTRESS |
| FP | F-PTF |
| SM | ISO M |
| SS | ISO S |
| EM | M |
| MJ | MJ |
| NG | NGO |
| GS | NGS |
| GT | NGT |
| SP | NPS |
| SF | NPSF |
| PS | NPSI |
| SL | NPSL |
| PM | NPSM |
| NP | NPT |
| NT | NPTF |
| PT | PTF-SAE SHORT |
| PF | PTF-SPL SHORT |
| RD | ROUND |
| SA | STUB ACME |
| MT | SUBMARINE THD |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNIFIED NATIONAL FINE (UNJ) |
| JF | UNIFIED NATIONAL JOINT FINE (UNJF) |
| JC | UNJC |
| JE | UNJEF |
| JS | UNJS |
| NS | UNS |
| WW | WHITWORTH |
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJX3AETJA2.0*;CQJX3AETJA2.0$JA2.0*;CQJX3AETJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(CMLP3AEEAA2)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CQQR*BTHREAD PITCH IN MILLIMETERS
A MEASUREMENT OF DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(CQQR3AEVB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CTTC*JTHREAD TOLERANCE CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING ESTABLISHED PITCH AND CREST DIAMETER TOLERANCE POSITION AND GRADE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a alpha-numeric reply with a minimum of one character.
(CTTC3AEVJEXT2.0*;CTTC3AEVJEXT2.0$JEXT2.0*;CTTC3AEVJEXT2.0$$JEXT2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN73) | Reply |
| EXT | EXTERNAL |
| NTE | INTERNAL |
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(AAJD3AEVAR0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AAJE*JTHREAD PITCH DIAMETERS
THE MINIMUM AND MAXIMUM PITCH DIAMETER LIMITS OF A STRAIGHT SCREW THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AAJE3AEVJLM32.0/P50.0*;AAJE3AEVJLM32.0/P50.0$$JL*;AAJE3AEVJLM32.0/P50.0$JLM32.0/P50.0*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
ACKH*JMINIMUM INSIDE BENDING RADIUS
THE MINIMUM INSIDE BENDING RADIUS FORMED WITHOUT STRESSING OR DEFORMATION OF A FLEXIBLE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACKHJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AMPY*JHOSE WEIGHT
THE WEIGHT PER SPECIFIC LENGTH OF HOSE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AMPYJFS2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| FT | GRAMS PER LINEAR CENTIMETER |
| FS | OUNCES PER LINEAR FOOT |
ABJH*JTEMP RATING
A VALUE WHICH EXPRESSES THE DEGREE OF HEAT OR COLD AS APPLIED TO THE OPERATION,OR LIMITATION OF OPERATION,OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit as in the first and second examples.For negative temperature values, precede the numeric portion of the reply with the letter “M” as in the third and fourth examples.If ISAC coding is authorized for this requirement and one or more of the temperature values in negative, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.Also precede the numeric portion of the reply with the letter “M” as in the fifth and sixth examples.
(ABJHJF68.0*; ABJHJC0.0$$JC35.0*; ABJHJFCM15.0*; ABJHJFM40.0$$JF75.0*; ABJH1BJFM25.0*; ABJH1BJCM35.0$$JCM5.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
CQGM*JMAXIMUM OPERATING PRESSURE
THE MAXIMUM PRESSURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQGMJN2.0*)
| Table 1 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
CXMT*JEXTERNAL OPERATING PRESSURE
THE NOMINAL FORCE PER UNIT OF AREA EXERTED INWARD FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CXMTJLM2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| LM | BAR |
| EY | KILOGRAMS PER SQUARE CENTIMETER |
| LG | KILOPASCALS |
| FB | POUNDS PER SQUARE INCH |
ADLE*JVACUUM RATING
THE ULTIMATE MAXIMUM VACUUM,EXPRESSED IN TERMS OF ABSOLUTE PRESSURE,THAT MAY BE PRODUCED BY OR APPLIED TO AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADLEJK2.0*)
| Table 1 |
| Reply Code (AC43) | Reply |
| M | INCHES OF MERCURY |
| K | KILOPASCALS |
| D | MILLIMETERS MERCURY |
| T | TORR |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCYT*;CBBLDANX$$DALD*)
| Table 1 |
| Reply Code (AN47) | Reply |
| CYT | ABRASION RESISTANT |
| CYU | CHEMICAL RESISTANT |
| ALC | COMMUNICATION CABLE |
| CYV | FLAME RESISTANT |
| AGJ | FUNGUS RESISTANT TREATMENT |
| AAT | HUMIDITY PROOF |
| ABJ | MOISTURE PROOFING |
| ALQ | OIL RESISTANT |
| ALD | OZONE RESISTANT |
| ALE | RESTRAINT CORD |
| ALF | SCUFF STRIP |
| ALG | STOWAGE DEVICE |
| ANX | THERMAL INSULATED |
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information