A drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, and the like. Icludes items with bearings. Excludes:items having more than on worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
expandFSC Information
3040Miscellaneous Power Transmission Equipment
expandColloquial Information
K6450MIXING SHAFT
H9512SHAFT,WORM WHEEL
G8267WORM GEAR-SHAFT
G3332GEARSHAFT,WORM
H9511SHAFT,WORM GEAR
expandChange List
ISAC Reply 3AEE added to MRC BYFR.
ISAC Reply 3AET added to MRC BYFR.
ISAC Reply 3AEU added to MRC BYFR.
ISAC Reply 3HOU added to MRC BYFR.
ISAC Reply 3AEE added to MRC CCKD.
ISAC Reply 3AET added to MRC CCKD.
ISAC Reply 3AEU added to MRC CCKD.
ISAC Reply 3AEV added to MRC CCKD.
ISAC Reply 3AKD added to MRC CCKD.
ISAC Reply 3AKE added to MRC CCKD.
ISAC Reply 3AKJ added to MRC CCKD.
ISAC Reply 3AKK added to MRC CCKD.
ISAC Reply 3AKL added to MRC CCKD.
ISAC Reply 3AKM added to MRC CCKD.
ISAC Reply 3AKN added to MRC CCKD.
ISAC Reply 3AKT added to MRC CCKD.
ISAC Reply 3ALE added to MRC CCKD.
ISAC Reply 3HOU added to MRC CCKD.
ISAC Reply 1A deleted from MRC CCKD.
ISAC Reply 2AA deleted from MRC CCKD.
ISAC Reply 3AAA deleted from MRC CCKD.
ISAC Reply 3AAB deleted from MRC CCKD.
ISAC Reply 3AAC deleted from MRC CCKD.
ISAC Reply 2AB deleted from MRC CCKD.
ISAC Reply 3ABA deleted from MRC CCKD.
ISAC Reply 3ABB deleted from MRC CCKD.
ISAC Reply 3ABC deleted from MRC CCKD.
ISAC Reply 2AC deleted from MRC CCKD.
ISAC Reply 3ACA deleted from MRC CCKD.
ISAC Reply 3ACB deleted from MRC CCKD.
ISAC Reply 3ACC deleted from MRC CCKD.
ISAC Reply 2AD deleted from MRC CCKD.
ISAC Reply 3ADA deleted from MRC CCKD.
ISAC Reply 3ADB deleted from MRC CCKD.
ISAC Reply 3ADC deleted from MRC CCKD.
ISAC Reply 2AE deleted from MRC CCKD.
ISAC Reply 3AEA deleted from MRC CCKD.
ISAC Reply 3AEB deleted from MRC CCKD.
ISAC Reply 3AEC deleted from MRC CCKD.
ISAC Reply 2AF deleted from MRC CCKD.
ISAC Reply 3AFA deleted from MRC CCKD.
ISAC Reply 3AFB deleted from MRC CCKD.
ISAC Reply 3AFC deleted from MRC CCKD.
ISAC Reply 2AG deleted from MRC CCKD.
ISAC Reply 3AGA deleted from MRC CCKD.
ISAC Reply 3AGB deleted from MRC CCKD.
ISAC Reply 3AGC deleted from MRC CCKD.
ISAC Reply 2AH deleted from MRC CCKD.
ISAC Reply 3AHA deleted from MRC CCKD.
ISAC Reply 3AHB deleted from MRC CCKD.
ISAC Reply 3AHC deleted from MRC CCKD.
ISAC Reply 2AJ deleted from MRC CCKD.
ISAC Reply 3AJA deleted from MRC CCKD.
ISAC Reply 3AJB deleted from MRC CCKD.
ISAC Reply 3AJC deleted from MRC CCKD.
ISAC Reply 2AK deleted from MRC CCKD.
ISAC Reply 2AL deleted from MRC CCKD.
ISAC Reply 3ALA deleted from MRC CCKD.
ISAC Reply 3ALB deleted from MRC CCKD.
ISAC Reply 3ALC deleted from MRC CCKD.
ISAC Reply 2AM deleted from MRC CCKD.
ISAC Reply 3AMA deleted from MRC CCKD.
ISAC Reply 3AMB deleted from MRC CCKD.
ISAC Reply 3AMC deleted from MRC CCKD.
ISAC Reply 2AN deleted from MRC CCKD.
ISAC Reply 3ANA deleted from MRC CCKD.
ISAC Reply 3ANB deleted from MRC CCKD.
ISAC Reply 3ANC deleted from MRC CCKD.
ISAC Reply 2AP deleted from MRC CCKD.
ISAC Reply 3APA deleted from MRC CCKD.
ISAC Reply 3APB deleted from MRC CCKD.
ISAC Reply 3APC deleted from MRC CCKD.
ISAC Reply 2AQ deleted from MRC CCKD.
ISAC Reply 3AQA deleted from MRC CCKD.
ISAC Reply 3AQB deleted from MRC CCKD.
ISAC Reply 3AQC deleted from MRC CCKD.
ISAC Reply 2AR deleted from MRC CCKD.
ISAC Reply 3ARA deleted from MRC CCKD.
ISAC Reply 3ARB deleted from MRC CCKD.
ISAC Reply 3ARC deleted from MRC CCKD.
ISAC Reply 2AS deleted from MRC CCKD.
ISAC Reply 3ASA deleted from MRC CCKD.
ISAC Reply 3ASB deleted from MRC CCKD.
ISAC Reply 3ASC deleted from MRC CCKD.
ISAC Reply 2AT deleted from MRC CCKD.
ISAC Reply 3ATA deleted from MRC CCKD.
ISAC Reply 3ATB deleted from MRC CCKD.
ISAC Reply 3ATC deleted from MRC CCKD.
ISAC Reply 1B deleted from MRC CCKD.
ISAC Reply 2BA deleted from MRC CCKD.
ISAC Reply 3BAA deleted from MRC CCKD.
ISAC Reply 3BAB deleted from MRC CCKD.
ISAC Reply 3BAC deleted from MRC CCKD.
ISAC Reply 2BB deleted from MRC CCKD.
ISAC Reply 3BBA deleted from MRC CCKD.
ISAC Reply 3BBB deleted from MRC CCKD.
ISAC Reply 3BBC deleted from MRC CCKD.
ISAC Reply 2BC deleted from MRC CCKD.
ISAC Reply 3BCA deleted from MRC CCKD.
ISAC Reply 3BCB deleted from MRC CCKD.
ISAC Reply 3BCC deleted from MRC CCKD.
ISAC Reply 2BD deleted from MRC CCKD.
ISAC Reply 3BDA deleted from MRC CCKD.
ISAC Reply 3BDB deleted from MRC CCKD.
ISAC Reply 3BDC deleted from MRC CCKD.
ISAC Reply 2BE deleted from MRC CCKD.
ISAC Reply 3BEA deleted from MRC CCKD.
ISAC Reply 3BEB deleted from MRC CCKD.
ISAC Reply 3BEC deleted from MRC CCKD.
ISAC Reply 2BF deleted from MRC CCKD.
ISAC Reply 3BFA deleted from MRC CCKD.
ISAC Reply 3BFB deleted from MRC CCKD.
ISAC Reply 3BFC deleted from MRC CCKD.
ISAC Reply 2BG deleted from MRC CCKD.
ISAC Reply 3BGA deleted from MRC CCKD.
ISAC Reply 3BGB deleted from MRC CCKD.
ISAC Reply 3BGC deleted from MRC CCKD.
ISAC Reply 2BH deleted from MRC CCKD.
ISAC Reply 3BHA deleted from MRC CCKD.
ISAC Reply 3BHB deleted from MRC CCKD.
ISAC Reply 3BHC deleted from MRC CCKD.
ISAC Reply 2BJ deleted from MRC CCKD.
ISAC Reply 3BJA deleted from MRC CCKD.
ISAC Reply 3BJB deleted from MRC CCKD.
ISAC Reply 3BJC deleted from MRC CCKD.
ISAC Reply 2BK deleted from MRC CCKD.
ISAC Reply 3BKA deleted from MRC CCKD.
ISAC Reply 3BKB deleted from MRC CCKD.
ISAC Reply 3BKC deleted from MRC CCKD.
ISAC Reply 2BL deleted from MRC CCKD.
ISAC Reply 3BLA deleted from MRC CCKD.
ISAC Reply 3BLB deleted from MRC CCKD.
ISAC Reply 3BLC deleted from MRC CCKD.
ISAC Reply 2BM deleted from MRC CCKD.
ISAC Reply 3BMA deleted from MRC CCKD.
ISAC Reply 3BMB deleted from MRC CCKD.
ISAC Reply 3BMC deleted from MRC CCKD.
ISAC Reply 2BN deleted from MRC CCKD.
ISAC Reply 3BNA deleted from MRC CCKD.
ISAC Reply 3BNB deleted from MRC CCKD.
ISAC Reply 3BNC deleted from MRC CCKD.
ISAC Reply 2BP deleted from MRC CCKD.
ISAC Reply 3BPA deleted from MRC CCKD.
ISAC Reply 3BPB deleted from MRC CCKD.
ISAC Reply 3BPC deleted from MRC CCKD.
ISAC Reply 2BQ deleted from MRC CCKD.
ISAC Reply 3BQA deleted from MRC CCKD.
ISAC Reply 3BQB deleted from MRC CCKD.
ISAC Reply 3BQC deleted from MRC CCKD.
ISAC Reply 2BR deleted from MRC CCKD.
ISAC Reply 3BRA deleted from MRC CCKD.
ISAC Reply 3BRB deleted from MRC CCKD.
ISAC Reply 3BRC deleted from MRC CCKD.
ISAC Reply 2BS deleted from MRC CCKD.
ISAC Reply 3BSA deleted from MRC CCKD.
ISAC Reply 3BSB deleted from MRC CCKD.
ISAC Reply 3BSC deleted from MRC CCKD.
ISAC Reply 2BT deleted from MRC CCKD.
ISAC Reply 3BTA deleted from MRC CCKD.
ISAC Reply 3BTB deleted from MRC CCKD.
ISAC Reply 3BTC deleted from MRC CCKD.
ISAC Reply 1C deleted from MRC CCKD.
ISAC Reply 2CA deleted from MRC CCKD.
ISAC Reply 3CAA deleted from MRC CCKD.
ISAC Reply 3CAB deleted from MRC CCKD.
ISAC Reply 3CAC deleted from MRC CCKD.
ISAC Reply 2CB deleted from MRC CCKD.
ISAC Reply 3CBA deleted from MRC CCKD.
ISAC Reply 3CBB deleted from MRC CCKD.
ISAC Reply 3CBC deleted from MRC CCKD.
ISAC Reply 2CC deleted from MRC CCKD.
ISAC Reply 3CCA deleted from MRC CCKD.
ISAC Reply 3CCB deleted from MRC CCKD.
ISAC Reply 3CCC deleted from MRC CCKD.
ISAC Reply 2CD deleted from MRC CCKD.
ISAC Reply 3CDA deleted from MRC CCKD.
ISAC Reply 3CDB deleted from MRC CCKD.
ISAC Reply 3CDC deleted from MRC CCKD.
ISAC Reply 2CE deleted from MRC CCKD.
ISAC Reply 3CEA deleted from MRC CCKD.
ISAC Reply 3CEB deleted from MRC CCKD.
ISAC Reply 3CEC deleted from MRC CCKD.
ISAC Reply 2CF deleted from MRC CCKD.
ISAC Reply 3CFA deleted from MRC CCKD.
ISAC Reply 3CFB deleted from MRC CCKD.
ISAC Reply 3CFC deleted from MRC CCKD.
ISAC Reply 2CG deleted from MRC CCKD.
ISAC Reply 3CGA deleted from MRC CCKD.
ISAC Reply 3CGB deleted from MRC CCKD.
ISAC Reply 3CGC deleted from MRC CCKD.
ISAC Reply 2CH deleted from MRC CCKD.
ISAC Reply 3CHA deleted from MRC CCKD.
ISAC Reply 3CHB deleted from MRC CCKD.
ISAC Reply 3CHC deleted from MRC CCKD.
ISAC Reply 2CJ deleted from MRC CCKD.
ISAC Reply 3CJA deleted from MRC CCKD.
ISAC Reply 3CJB deleted from MRC CCKD.
ISAC Reply 3CJC deleted from MRC CCKD.
ISAC Reply 2CK deleted from MRC CCKD.
ISAC Reply 3CKA deleted from MRC CCKD.
ISAC Reply 3CKB deleted from MRC CCKD.
ISAC Reply 3CKC deleted from MRC CCKD.
ISAC Reply 2CL deleted from MRC CCKD.
ISAC Reply 3CLA deleted from MRC CCKD.
ISAC Reply 3CLB deleted from MRC CCKD.
ISAC Reply 3CLC deleted from MRC CCKD.
ISAC Reply 2CM deleted from MRC CCKD.
ISAC Reply 3CMA deleted from MRC CCKD.
ISAC Reply 3CMB deleted from MRC CCKD.
ISAC Reply 3CMC deleted from MRC CCKD.
ISAC Reply 2CN deleted from MRC CCKD.
ISAC Reply 3CNA deleted from MRC CCKD.
ISAC Reply 3CNB deleted from MRC CCKD.
ISAC Reply 3CNC deleted from MRC CCKD.
ISAC Reply 2CP deleted from MRC CCKD.
ISAC Reply 3CPA deleted from MRC CCKD.
ISAC Reply 3CPB deleted from MRC CCKD.
ISAC Reply 3CPC deleted from MRC CCKD.
ISAC Reply 2CQ deleted from MRC CCKD.
ISAC Reply 3CQA deleted from MRC CCKD.
ISAC Reply 3CQB deleted from MRC CCKD.
ISAC Reply 3CQC deleted from MRC CCKD.
ISAC Reply 2CR deleted from MRC CCKD.
ISAC Reply 3CRA deleted from MRC CCKD.
ISAC Reply 3CRB deleted from MRC CCKD.
ISAC Reply 3CRC deleted from MRC CCKD.
ISAC Reply 2CS deleted from MRC CCKD.
ISAC Reply 3CSA deleted from MRC CCKD.
ISAC Reply 3CSB deleted from MRC CCKD.
ISAC Reply 3CSC deleted from MRC CCKD.
ISAC Reply 2CT deleted from MRC CCKD.
ISAC Reply 3CTA deleted from MRC CCKD.
ISAC Reply 3CTB deleted from MRC CCKD.
ISAC Reply 3CTC deleted from MRC CCKD.
ISAC Reply 1D deleted from MRC CCKD.
ISAC Reply 2DA deleted from MRC CCKD.
ISAC Reply 3DAA deleted from MRC CCKD.
ISAC Reply 3DAB deleted from MRC CCKD.
ISAC Reply 3DAC deleted from MRC CCKD.
ISAC Reply 2DB deleted from MRC CCKD.
ISAC Reply 3DBA deleted from MRC CCKD.
ISAC Reply 3DBB deleted from MRC CCKD.
ISAC Reply 3DBC deleted from MRC CCKD.
ISAC Reply 2DC deleted from MRC CCKD.
ISAC Reply 3DCA deleted from MRC CCKD.
ISAC Reply 3DCB deleted from MRC CCKD.
ISAC Reply 3DCC deleted from MRC CCKD.
ISAC Reply 2DD deleted from MRC CCKD.
ISAC Reply 3DDA deleted from MRC CCKD.
ISAC Reply 3DDB deleted from MRC CCKD.
ISAC Reply 3DDC deleted from MRC CCKD.
ISAC Reply 2DE deleted from MRC CCKD.
ISAC Reply 3DEA deleted from MRC CCKD.
ISAC Reply 3DEB deleted from MRC CCKD.
ISAC Reply 3DEC deleted from MRC CCKD.
ISAC Reply 2DF deleted from MRC CCKD.
ISAC Reply 3DFA deleted from MRC CCKD.
ISAC Reply 3DFB deleted from MRC CCKD.
ISAC Reply 3DFC deleted from MRC CCKD.
ISAC Reply 2DG deleted from MRC CCKD.
ISAC Reply 3DGA deleted from MRC CCKD.
ISAC Reply 3DGB deleted from MRC CCKD.
ISAC Reply 3DGC deleted from MRC CCKD.
ISAC Reply 2DH deleted from MRC CCKD.
ISAC Reply 3DHA deleted from MRC CCKD.
ISAC Reply 3DHB deleted from MRC CCKD.
ISAC Reply 3DHC deleted from MRC CCKD.
ISAC Reply 2DJ deleted from MRC CCKD.
ISAC Reply 3DJA deleted from MRC CCKD.
ISAC Reply 3DJB deleted from MRC CCKD.
ISAC Reply 3DJC deleted from MRC CCKD.
ISAC Reply 2DK deleted from MRC CCKD.
ISAC Reply 3DKA deleted from MRC CCKD.
ISAC Reply 3DKB deleted from MRC CCKD.
ISAC Reply 3DKC deleted from MRC CCKD.
ISAC Reply 2DL deleted from MRC CCKD.
ISAC Reply 3DLA deleted from MRC CCKD.
ISAC Reply 3DLB deleted from MRC CCKD.
ISAC Reply 3DLC deleted from MRC CCKD.
ISAC Reply 2DM deleted from MRC CCKD.
ISAC Reply 3DMA deleted from MRC CCKD.
ISAC Reply 3DMB deleted from MRC CCKD.
ISAC Reply 3DMC deleted from MRC CCKD.
ISAC Reply 2DN deleted from MRC CCKD.
ISAC Reply 3DNA deleted from MRC CCKD.
ISAC Reply 3DNB deleted from MRC CCKD.
ISAC Reply 3DNC deleted from MRC CCKD.
ISAC Reply 2DP deleted from MRC CCKD.
ISAC Reply 3DPA deleted from MRC CCKD.
ISAC Reply 3DPB deleted from MRC CCKD.
ISAC Reply 3DPC deleted from MRC CCKD.
ISAC Reply 2DQ deleted from MRC CCKD.
ISAC Reply 3DQA deleted from MRC CCKD.
ISAC Reply 3DQB deleted from MRC CCKD.
ISAC Reply 3DQC deleted from MRC CCKD.
ISAC Reply 2DR deleted from MRC CCKD.
ISAC Reply 3DRA deleted from MRC CCKD.
ISAC Reply 3DRB deleted from MRC CCKD.
ISAC Reply 3DRC deleted from MRC CCKD.
ISAC Reply 2DS deleted from MRC CCKD.
ISAC Reply 3DSA deleted from MRC CCKD.
ISAC Reply 3DSB deleted from MRC CCKD.
ISAC Reply 3DSC deleted from MRC CCKD.
ISAC Reply 2DT deleted from MRC CCKD.
ISAC Reply 3DTA deleted from MRC CCKD.
ISAC Reply 3DTB deleted from MRC CCKD.
ISAC Reply 3DTC deleted from MRC CCKD.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED18249*)
CFFBAWORM THREAD QUANTITY
THE NUMBER OF THREADS ON THE WORM.
Enter the numeric reply with a minimum of one digit.
(CFFBA10*)
CFFFBWORM PRESSURE ANGLE IN DEG
THE PRESSURE ANGLE OF THE WORM,EXPRESSED IN DEGREES.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CFFFB2.0)
CFFCJWORM THREAD LEAD
THE DISTANCE A WORM THREAD ADVANCES AXIALLY IN ONE COMPLETE TURN.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFFCJLA2.0*;CFFCJLA2.0$$JLA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFFDDWORM THREAD DIRECTION
THE DIRECTION OF THE WORM THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable reply code from the table below
(CFFDDAAL)
Table 1
Reply Code (AA38)Reply
AAGLEFT-HAND
AALRIGHT-HAND
CFFKJWORM OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE WORM,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFFKJLC2.0*;CFFKJLC2.0$$JLC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABHPJOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJLC2.0*;ABHPJLC2.0$$JLC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDST9440*;MATTDFEA000$DST8742*;MATTDFEA000$$DST8742*)
Table 1
Reply Code (MA01)Reply
ALA000ALUMINUM
ALB000ALUMINUM ALLOY
AL5052ALUMINUM ALLOY 5052
CUB000COPPER ALLOY
CU0104COPPER ALLOY 511
FEA000IRON
FEB000IRON CAST
NLB000NICKEL ALLOY
NL0008NICKEL ALLOY 400
STA000STEEL
ST1050STEEL COMP 1050
ST1141STEEL COMP 1141
ST1144STEEL COMP 1144
ST2315STEEL COMP 2315
ST0302STEEL COMP 302
ST0303STEEL COMP 303
ST0079STEEL COMP 303SE
ST0304STEEL COMP 304
ST0316STEEL COMP 316
ST0410STEEL COMP 410
ST4130STEEL COMP 4130
ST4140STEEL COMP 4140
ST4142STEEL COMP 4142
ST4145STEEL COMP 4145
ST0416STEEL COMP 416
ST4330STEEL COMP 4330
ST0108STEEL COMP 440F
ST4615STEEL COMP 4615
ST4617STEEL COMP 4617
ST4620STEEL COMP 4620
ST5120STEEL COMP 5120
ST0630STEEL COMP 630
ST8617STEEL COMP 8617
ST8620STEEL COMP 8620
ST8640STEEL COMP 8640
ST8642STEEL COMP 8642
ST8720STEEL COMP 8720
ST8740STEEL COMP 8740
ST8742STEEL COMP 8742
ST9440STEEL COMP 9440
ST0028STEEL COMP E4340
ST0031STEEL COMP E9310
STB000STEEL CORROSION RESISTING
ST1761STEEL UNS J24056
ST0532STEEL UNS K24065
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
Table 1
Reply Code (AP33)Reply
QAEROSPACE MATERIAL SPEC STD
JAMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
GASSN STD
ACOMMERCIAL ITEM DESCRIPTION
KDEF STAN/SPEC
BFED SPEC
CFED STD
LGOVERNMENT STD/SPEC
NINTERNATIONAL STD/SPEC
FMFR REF
DMIL SPEC
EMIL STD
HNATIONAL SPEC
PNATIONAL STD
MNATIONAL STD/SPEC
Table 2
Reply Code (AP18)Reply
M10TH MATERIAL RESPONSE
N11TH MATERIAL RESPONSE
P12TH MATERIAL RESPONSE
Q13TH MATERIAL RESPONSE
R14TH MATERIAL RESPONSE
S15TH MATERIAL RESPONSE
T16TH MATERIAL RESPONSE
U17TH MATERIAL RESPONSE
W18TH MATERIAL RESPONSE
X19TH MATERIAL RESPONSE
B1ST MATERIAL RESPONSE
Y20TH MATERIAL RESPONSE
Z21ST MATERIAL RESPONSE
V22ND MATERIAL RESPONSE
C2ND MATERIAL RESPONSE
D3RD MATERIAL RESPONSE
E4TH MATERIAL RESPONSE
F5TH MATERIAL RESPONSE
H6TH MATERIAL RESPONSE
J7TH MATERIAL RESPONSE
K8TH MATERIAL RESPONSE
L9TH MATERIAL RESPONSE
GALL MATERIAL RESPONSES
ASINGLE MATERIAL RESPONSE
IF STYLE/REPLY CODE(s) CTQ WERE ENTERED FOR MRC CFFW, YOU MUST ANSWER MRC (AAHN)
CFFWDSHAFT LOCATION
INDICATES THE LOCATION OF THE SHAFT(S) ON THE ITEM.
Enter the applicable reply code from the table below
(CFFWDCTR)
Table 1
Reply Code (AJ91)Reply
CTQBOTH ENDS OF WORM
CTRONE END OF WORM
AAHN*DEND SIMILARITY
A TERM USED TO IDENTIFY THE ENDS AS IDENTICAL OR NOT IDENTICAL.
Enter the applicable reply code from the table below
(AAHNDB)
Table 1
Reply Code (AA37)Reply
CIDENTICAL
BNOT IDENTICAL
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC CFFQ, YOU MUST ANSWER MRC (CFFR and CFFS and CFFT)
CFFQDWORM BODY TAPERED BEARING SURFACE END
AN INDICATION OF WHETHER OR NOT THE WORM BODY END/S/ IS PROVIDED WITH A TAPERED BEARING SURFACE.
Enter the applicable reply code from the table below
(CFFQDB)
Table 1
Reply Code (AB22)Reply
CNOT PROVIDED
BPROVIDED
CFFR*JTAPERED BEARING SURFACE LARGEST DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE LARGEST TAPERED BEARING SURFACE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFFRJAA2.0*;CFFRJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFFS*JTAPERED BEARING SURFACE SMALLEST DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE SMALLEST TAPERED BEARING SURFACE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFFSJAA2.0*;CFFSJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFFT*JTAPERED BEARING SURFACE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE TAPERED BEARING SURFACE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFFTJAC2.0*;CFFTJAC2.0$$JAC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
BYFR*JTEETH HARDNESS RATING
A NUMERIC VALUE THAT REFLECTS THE HARDNESS OF THE TEETH WHEN USED IN CONJUNCTION WITH A HARDNESS RATING SCALE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BYFR3AEUJRUA2.0*;BYFR3AEUJRUA2.0$JRUA2.0*;BYFR3AEUJRUA2.0$$JRUA2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AC26)Reply
RBROCKWELL B
RCROCKWELL C
RSROCKWELL SUPERFICIAL 15-N
RUROCKWELL SUPERFICIAL 30-N
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFFM*JSHAFT HARDNESS RATING
A NUMERIC VALUE THAT REFLECTS THE HARDNESS OF THE SHAFT WHEN USED IN CONJUNCITON WITH A HARDNESS RATING SCALE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFFM3AEEJRUA2.0*;CFFM3AEEJRUA2.0$JRUA2.0*;CFFM3AEEJRUA2.0$$JRUA2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AC26)Reply
RBROCKWELL B
RCROCKWELL C
RSROCKWELL SUPERFICIAL 15-N
RUROCKWELL SUPERFICIAL 30-N
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDPSA000*;SFTTDLCA000$DPHC000*;SFTTDLCA000$$DPHC000*)
Table 1
Reply Code (SF01)Reply
ANA000ANODIZE
CDA000CADMIUM
AAA002CHEMICAL
XXH000CHEMICAL FILM
CMA000CHROMATE
CMB000CHROMATE ZINC
CRA000CHROMIUM
PBA000LEAD
NLA000NICKEL
LCA000OIL
XXB000OXIDE
PSA000PASSIVATE
PHA000PHOSPHATE
PHC000PHOSPHATE MANGANESE
LBG000SOLID FILM LUBRICANT
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
Table 1
Reply Code (AP33)Reply
GASSN STD
ACOMMERCIAL ITEM DESCRIPTION
KDEF STAN/SPEC
BFED SPEC
CFED STD
LGOVERNMENT STD/SPEC
NINTERNATIONAL STD/SPEC
FMFR REF
DMIL SPEC
EMIL STD
HNATIONAL SPEC
PNATIONAL STD
MNATIONAL STD/SPEC
Table 2
Reply Code (AP39)Reply
M10TH TREATMENT RESPONSE
N11TH TREATMENT RESPONSE
P12TH TREATMENT RESPONSE
Q13TH TREATMENT RESPONSE
R14TH TREATMENT RESPONSE
S15TH TREATMENT RESPONSE
B1ST TREATMENT RESPONSE
C2ND TREATMENT RESPONSE
D3RD TREATMENT RESPONSE
E4TH TREATMENT RESPONSE
F5TH TREATMENT RESPONSE
H6TH TREATMENT RESPONSE
J7TH TREATMENT RESPONSE
K8TH TREATMENT RESPONSE
L9TH TREATMENT RESPONSE
GALL TREATMENT RESPONSES
ASINGLE TREATMENT RESPONSE
CFFG*GWORM HELIX ANGLE
THE ANGULAR AMOUNT THE WORM IS INCLINED.
Enter clear text.
(CFFGGCLEARTEXT)
IF YOU ANSWER MRC CFFH, YOU MUST ANSWER MRC (CFFJ)
CFFH*JCONCAVE WORM THROAT CURVATURE RADIUS
A MEASUREMENT OF THE THROAT CURVATURE RADIUS OF A CONCAVE WORM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFFHJAC2.0*;CFFHJAC2.0$$JAC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFFJ*JCONCAVE WORM THROAT DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE CONCAVE WORM THROAT,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFFJJAC2.0*;CFFJJAC2.0$$JAC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFFL*JWORM PITCH DIAMETER
A MEASUREMENT INDICATING THE DIAMETER-PITCH PER MEASUREMENT SCALE OF THE WORM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFFLJAC2.0*;CFFLJAC2.0$$JAC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFFN*JWORM THREAD SECTION LENGTH
A MEASUREMENT OF THE EXTENT OF THREADS,INCLUDING INCOMPLETE THREADS,ALONG A LINE PARALLEL TO THE LONGITUDINAL AXIS OF THE WORM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFFNJAA2.0*;CFFNJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFFP*JWORM BODY LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE WORM BODY,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFFPJAA2.0*;CFFPJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFFX*JSTRAIGHT UNTHREADED LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE STRAIGHT UNTHREADED PORTION OF THE ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFFX3AEUJAB2.0*;CFFX3AEUJAB2.0$JAB2.0*;CFFX3AEUJAB2.0$$JAB2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AEVBOTH ENDS
3AJZEITHER END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKCFIRST END THIRD PORTION
3AKDFIRST END FOURTH PORTION
3AKEFIRST END FIFTH PORTION
3AKFFIRST END SIXTH PORTION
3AKGFIRST END SEVENTH PORTION
3AKHFIRST END EIGHTH PORTION
3AKIFIRST END NINTH PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3AKNSECOND END FIFTH PORTION
3AKOSECOND END SIXTH PORTION
3AKPSECOND END SEVENTH PORTION
3AKQSECOND END EIGHTH PORTION
3AKSBOTH ENDS FIRST PORTION
3AKTBOTH ENDS SECOND PORTION
3AKVEITHER END FIRST PORTION
3AKWEITHER END SECOND PORTION
3AKXEITHER END FOURTH PORTION
3AKYEITHER END NINTH PORTION
3AKZEITHER END TWELFTH PORTION
3ALABOTH ENDS THIRD PORTION
3ALBEITHER END THIRD PORTION
3ALCEITHER END FIFTH PORTION
3ALDEITHER END SIXTH PORTION
3ALEEITHER END SEVENTH PORTION
3ALHEITHER END ELEVENTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFFY*JSTRAIGHT UNTHREADED SECTION DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE STRAIGHT UNTHREADED SECTION,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFFY3AKPJAC2.0*;CFFY3AKPJAC2.0$JAC2.0*;CFFY3AKPJAC2.0$$JAC2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AEVBOTH ENDS
3AJZEITHER END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKCFIRST END THIRD PORTION
3AKDFIRST END FOURTH PORTION
3AKEFIRST END FIFTH PORTION
3AKFFIRST END SIXTH PORTION
3AKGFIRST END SEVENTH PORTION
3AKHFIRST END EIGHTH PORTION
3AKIFIRST END NINTH PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3AKNSECOND END FIFTH PORTION
3AKOSECOND END SIXTH PORTION
3AKPSECOND END SEVENTH PORTION
3AKQSECOND END EIGHTH PORTION
3AKSBOTH ENDS FIRST PORTION
3AKTBOTH ENDS SECOND PORTION
3AKVEITHER END FIRST PORTION
3AKWEITHER END SECOND PORTION
3AKXEITHER END FOURTH PORTION
3AKYEITHER END NINTH PORTION
3AKZEITHER END TWELFTH PORTION
3ALABOTH ENDS THIRD PORTION
3ALBEITHER END THIRD PORTION
3ALCEITHER END FIFTH PORTION
3ALDEITHER END SIXTH PORTION
3ALEEITHER END SEVENTH PORTION
3ALHEITHER END ELEVENTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFFZ*JUNTHREADED SECTION KEYWAY WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN UNTHREADED SECTION KEYWAY.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFFZ3AKUJAA2.0*;CFFZ3AKUJAA2.0$JAA2.0*;CFFZ3AKUJAA2.0$$JAA2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKCFIRST END THIRD PORTION
3AKDFIRST END FOURTH PORTION
3AKEFIRST END FIFTH PORTION
3AKFFIRST END SIXTH PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3AKNSECOND END FIFTH PORTION
3AKOSECOND END SIXTH PORTION
3AKPSECOND END SEVENTH PORTION
3AKUBOTH ENDS FOURTH PORTION
3AKVEITHER END FIRST PORTION
3AKWEITHER END SECOND PORTION
3AKXEITHER END FOURTH PORTION
3AKYEITHER END NINTH PORTION
3AKZEITHER END TWELFTH PORTION
3ALBEITHER END THIRD PORTION
3ALEEITHER END SEVENTH PORTION
3ALHEITHER END ELEVENTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFGB*JUNTHREADED SECTION KEYWAY DEPTH
THE DISTANCE MEASURED ALONG A STRAIGHT LINE FROM THE TOP TO THE INNERMOST POINT OF THE UNTHREADED SECTION OF THE KEYWAY.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFGB3AKZJAC2.0*;CFGB3AKZJAC2.0$JAC2.0*;CFGB3AKZJAC2.0$$JAC2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKCFIRST END THIRD PORTION
3AKDFIRST END FOURTH PORTION
3AKEFIRST END FIFTH PORTION
3AKFFIRST END SIXTH PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3AKNSECOND END FIFTH PORTION
3AKOSECOND END SIXTH PORTION
3AKPSECOND END SEVENTH PORTION
3AKVEITHER END FIRST PORTION
3AKWEITHER END SECOND PORTION
3AKXEITHER END FOURTH PORTION
3AKYEITHER END NINTH PORTION
3AKZEITHER END TWELFTH PORTION
3ALBEITHER END THIRD PORTION
3ALEEITHER END SEVENTH PORTION
3ALHEITHER END ELEVENTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFGC*JUNTHREADED SECTION PIN HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE UNTHREADED SECTION PIN HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFGC3AKJJAB2.0*;CFGC3AKJJAB2.0$JAB2.0*;CFGC3AKJJAB2.0$$JAB2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AEVBOTH ENDS
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKDFIRST END FOURTH PORTION
3AKEFIRST END FIFTH PORTION
3AKFFIRST END SIXTH PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3AKNSECOND END FIFTH PORTION
3AKOSECOND END SIXTH PORTION
3AKPSECOND END SEVENTH PORTION
3AKSBOTH ENDS FIRST PORTION
3ALCEITHER END FIFTH PORTION
3ALDEITHER END SIXTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABND*JTAPER LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE TAPERED PORTION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABND3AKKJAC2.0*;ABND3AKKJAC2.0$JAC2.0*;ABND3AKKJAC2.0$$JAC2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3AKNSECOND END FIFTH PORTION
3AKPSECOND END SEVENTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFGD*JTAPER LARGEST DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE LARGEST PORTION OF THE TAPER,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFGD3AKMJAB2.0*;CFGD3AKMJAB2.0$JAB2.0*;CFGD3AKMJAB2.0$$JAB2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKMSECOND END FOURTH PORTION
3AKPSECOND END SEVENTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABNJ*BTAPER PER FOOT IN INCHES
THE DIMINISHING MEASUREMENT OF THE DIAMETER ALONG THE MAJOR AXIS OF THE ITEM,EXPRESSED PER FOOT IN INCHES.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(ABNJ3AKKB2.0)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AEVBOTH ENDS
3AKKSECOND END SECOND PORTION
3AKMSECOND END FOURTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
CFGF*JTAPERED SECTION PIN HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE TAPERED SECTION PIN HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFGF3AEEJAA2.0*;CFGF3AEEJAA2.0$JAA2.0*;CFGF3AEEJAA2.0$$JAA2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AKMSECOND END FOURTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFGG*JTAPERED SECTION KEYWAY WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE TAPERED SECTION KEYWAY.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFGG3AEEJAB2.0*;CFGG3AEEJAB2.0$JAB2.0*;CFGG3AEEJAB2.0$$JAB2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AKKSECOND END SECOND PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFGH*JTAPERED SECTION KEYWAY DEPTH
THE DISTANCE MEASURED ALONG A STRAIGHT LINE FROM THE TOP TO THE INNERMOST POINT OF THE TAPERED SECTION OF THE KEYWAY.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFGH3AEEJAC2.0*;CFGH3AEEJAC2.0$JAC2.0*;CFGH3AEEJAC2.0$$JAC2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AKKSECOND END SECOND PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFGJ*AINVOLUTE SPLINE QUANTITY
THE NUMBER OF INVOLUTE SPLINES ON THE ITEM.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(CFGJ3AKBA10)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AJZEITHER END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKCFIRST END THIRD PORTION
3AKDFIRST END FOURTH PORTION
3AKFFIRST END SIXTH PORTION
3AKKSECOND END SECOND PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
CFGK*BINVOLUTE SPLINE PRESSURE ANGLE IN DEG
THE PRESSURE ANGLE OF THE INVOLUTE SPLINE,EXPRESSED IN DEGREES.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(CFGK3AEEB2.0)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AJZEITHER END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKCFIRST END THIRD PORTION
3AKDFIRST END FOURTH PORTION
3AKFFIRST END SIXTH PORTION
3AKKSECOND END SECOND PORTION
3AKLSECOND END THIRD PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
CFGL*JINVOLUTE SPLINE PITCH DIAMETER
A MEASUREMENT INDICATING THE DIAMETER-PITCH PER MEASUREMENT SCALE OF THE INVOLUTE SPLINE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFGL3AKBJAB2.0*;CFGL3AKBJAB2.0$JAB2.0*;CFGL3AKBJAB2.0$$JAB2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKCFIRST END THIRD PORTION
3AKDFIRST END FOURTH PORTION
3AKFFIRST END SIXTH PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKLSECOND END THIRD PORTION
3AKQSECOND END EIGHTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFGM*JINVOLUTE SPLINE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE INVOLUTE SPLINE,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFGM3AKMJAA2.0*;CFGM3AKMJAA2.0$JAA2.0*;CFGM3AKMJAA2.0$$JAA2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKCFIRST END THIRD PORTION
3AKDFIRST END FOURTH PORTION
3AKFFIRST END SIXTH PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFQT*ASTRAIGHT SPLINE QUANTITY
THE NUMBER OF STRAIGHT SPLINES ON THE ITEM.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(CFQT3AETA10)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AEVBOTH ENDS
3AJZEITHER END
3AKMSECOND END FOURTH PORTION
3AKNSECOND END FIFTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
AAUJ*JSPLINE MAJOR DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE LARGEST CROSS SECTION OF A SPLINE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAUJ3AKMJAA2.0*;AAUJ3AKMJAA2.0$JAA2.0*;AAUJ3AKMJAA2.0$$JAA2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AEVBOTH ENDS
3AKCFIRST END THIRD PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3AKNSECOND END FIFTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABSC*JSPLINE MINOR DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE SMALLEST CROSS SECTION OF A SPLINE,AND TERMINATES AT THE CIRCUMFERENCE. PLEASE USE MRC AAUH IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABSC2ADJAB2.0*;ABSC2ADJAB2.0$$JAB2.1*)
Table 1
ISAC Field Indicator (0065)Location
1AFIRST END
1BSECOND END
1CBOTH ENDS
1DEITHER END
2AAFIRST END, FIRST PORTION
2ABFIRST END, SECOND PORTION
2ACFIRST END, THIRD PORTION
2ADFIRST END, FOURTH PORTION
2AEFIRST END, FIFTH PORTION
2AFFIRST END, SIXTH PORTION
2AGFIRST END, SEVENTH PORTION
2AHFIRST END, EIGHTH PORTION
2AJFIRST END, NINTH PORTION
2AKFIRST END, TENTH PORTION
2ALFIRST END, ELEVENTH PORTION
2AMFIRST END, TWELFTH PORTION
2ANFIRST END, THIRTEENTH PORTION
2APFIRST END, FOURTEENTH PORTION
2AQFIRST END, FIFTEENTH PORTION
2ARFIRST END, SIXTEENTH PORTION
2ASFIRST END, SEVENTEENTH PORTION
2ATFIRST END, EIGHTEENTH PORTION
2BASECOND END, FIRST PORTION
2BBSECOND END, SECOND PORTION
2BCSECOND END, THIRD PORTION
2BDSECOND END, FOURTH PORTION
2BESECOND END, FIFTH PORTION
2BFSECOND END, SIXTH PORTION
2BGSECOND END, SEVENTH PORTION
2BHSECOND END, EIGHTH PORTION
2BJSECOND END, NINTH PORTION
2BKSECOND END, TENTH PORTION
2BLSECOND END, ELEVENTH PORTION
2BMSECOND END, TWELFTH PORTION
2BNSECOND END, THIRTEENTH PORTION
2BPSECOND END, FOURTEENTH PORTION
2BQSECOND END, FIFTEENTH PORTION
2BRSECOND END, SIXTEENTH PORTION
2BSSECOND END, SEVENTEENTH PORTION
2BTSECOND END, EIGHTEENTH PORTION
2CABOTH ENDS, FIRST PORTION
2CBBOTH ENDS, SECOND PORTION
2CCBOTH ENDS, THIRD PORTION
2CDBOTH ENDS, FOURTH PORTION
2CEBOTH ENDS, FIFTH PORTION
2CFBOTH ENDS, SIXTH PORTION
2CGBOTH ENDS, SEVENTH PORTION
2CHBOTH ENDS, EIGHTH PORTION
2CJBOTH ENDS, NINTH PORTION
2CKBOTH ENDS, TENTH PORTION
2CLBOTH ENDS, ELEVENTH PORTION
2CMBOTH ENDS, TWELFTH PORTION
2CNBOTH ENDS, THIRTEENTH PORTION
2CPBOTH ENDS, FOURTEENTH PORTION
2CQBOTH ENDS, FIFTEENTH PORTION
2CRBOTH ENDS, SIXTEENTH PORTION
2CSBOTH ENDS, SEVENTEENTH PORTION
2CTBOTH ENDS, EIGHTEENTH PORTION
2DAEITHER END, FIRST PORTION
2DBEITHER END, SECOND PORTION
2DCEITHER END, THIRD PORTION
2DDEITHER END, FOURTH PORTION
2DEEITHER END, FIFTH PORTION
2DFEITHER END, SIXTH PORTION
2DGEITHER END, SEVENTH PORTION
2DHEITHER END, EIGHTH PORTION
2DJEITHER END, NINTH PORTION
2DKEITHER END, TENTH PORTION
2DLEITHER END, ELEVENTH PORTION
2DMEITHER END, TWELFTH PORTION
2DNEITHER END, THIRTEENTH PORTION
2DPEITHER END, FOURTEENTH PORTION
2DQEITHER END, FIFTEENTH PORTION
2DREITHER END, SIXTEENTH PORTION
2DSEITHER END, SEVENTEENTH PORTION
2DTEITHER END, EIGHTEENTH PORTION
3AAAFIRST END, FIRST PORTION
3AABFIRST END, FIRST PORTION
3AACFIRST END, FIRST PORTION
3ABAFIRST END, SECOND PORTION
3ABBFIRST END, SECOND PORTION
3ABCFIRST END, SECOND PORTION
3ACAFIRST END, THIRD PORTION
3ACBFIRST END, THIRD PORTION
3ACCFIRST END, THIRD PORTION
3ADAFIRST END, FOURTH PORTION
3ADBFIRST END, FOURTH PORTION
3AEAFIRST END, FIFTH PORTION
3AFAFIRST END, SIXTH PORTION
3AFBFIRST END, SIXTH PORTION
3BAASECOND END, FIRST PORTION
3BABSECOND END, FIRST PORTION
3BACSECOND END, FIRST PORTION
3BBASECOND END, SECOND PORTION
3BBBSECOND END, SECOND PORTION
3BBCSECOND END, SECOND PORTION
3BCASECOND END, THIRD PORTION
3BCBSECOND END, THIRD PORTION
3BCCSECOND END, THIRD PORTION
3BDASECOND END, FOURTH PORTION
3BDBSECOND END, FOURTH PORTION
3BEASECOND END, FIFTH PORTION
3BEBSECOND END, FIFTH PORTION
3BFASECOND END, SIXTH PORTION
3BFBSECOND END, SIXTH PORTION
3BGASECOND END, SEVENTH PORTION
3BGBSECOND END, SEVENTH PORTION
3BHASECOND END, EIGHTH PORTION
3CAABOTH ENDS, FIRST PORTION
3CABBOTH ENDS, FIRST PORTION
3CACBOTH ENDS, FIRST PORTION
3CBABOTH ENDS, SECOND PORTION
3CBBBOTH ENDS, SECOND PORTION
3CCABOTH ENDS, THIRD PORTION
3CCBBOTH ENDS, THIRD PORTION
3DAAEITHER END, FIRST PORTION
3DABEITHER END, FIRST PORTION
3DBAEITHER END, SECOND PORTION
3DBBEITHER END, SECOND PORTION
3DCAEITHER END, THIRD PORTION
3DCBEITHER END, THIRD PORTION
3DDAEITHER END, FOURTH PORTION
3DDBEITHER END, FOURTH PORTION
3DEAEITHER END, FIFTH PORTION
3DEBEITHER END, FIFTH PORTION
3DFAEITHER END, SIXTH PORTION
3DFBEITHER END, SIXTH PORTION
3DGAEITHER END, SEVENTH PORTION
3DGBEITHER END, SEVENTH PORTION
3DHAEITHER END, EIGHTH PORTION
3DJAEITHER END, NINTH PORTION
3DJBEITHER END, NINTH PORTION
3DKAEITHER END, TENTH PORTION
3DLAEITHER END, ELEVENTH PORTION
3DLBEITHER END, ELEVENTH PORTION
3DMAEITHER END, TWELFTH PORTION
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFQN*JSTRAIGHT SPLINE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A STRAIGHT SPLINE,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFQN3AEEJAA2.0*;CFQN3AEEJAA2.0$JAA2.0*;CFQN3AEEJAA2.0$$JAA2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3AKNSECOND END FIFTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ADDW*ASERRATION QUANTITY
THE NUMBER OF SERRATIONS ON THE ITEM.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(ADDW3AKBA10)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKTBOTH ENDS SECOND PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
BDTZ*JSERRATION MAJOR DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE OUTERMOST SURFACE OF A SERRATED BODY,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BDTZ3AKBJAB2.0*;BDTZ3AKBJAB2.0$JAB2.0*;BDTZ3AKBJAB2.0$$JAB2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKTBOTH ENDS SECOND PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
BDYJ*JSERRATION MINOR DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE INNERMOST SURFACE OF A SERRATED BODY,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BDYJ3AKJJAA2.0*;BDYJ3AKJJAA2.0$JAA2.0*;BDYJ3AKJJAA2.0$$JAA2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKTBOTH ENDS SECOND PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
AJBA*JSERRATED SECTION LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE SERRATED SECTION,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJBA3AKTJAC2.0*;AJBA3AKTJAC2.0$JAC2.0*;AJBA3AKTJAC2.0$$JAC2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKTBOTH ENDS SECOND PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFQP*JTHREADED SECTION PIN HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE THREADED SECTION PIN HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFQP3ALEJAC2.0*;CFQP3ALEJAC2.0$JAC2.0*;CFQP3ALEJAC2.0$$JAC2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AKBFIRST END SECOND PORTION
3AKEFIRST END FIFTH PORTION
3AKKSECOND END SECOND PORTION
3AKMSECOND END FOURTH PORTION
3ALDEITHER END SIXTH PORTION
3ALEEITHER END SEVENTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABRR*JKEYWAY WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A KEYWAY,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRR3AKJJAB2.0*;ABRR3AKJJAB2.0$JAB2.0*;ABRR3AKJJAB2.0$$JAB2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AEVBOTH ENDS
3AKAFIRST END FIRST PORTION
3AKCFIRST END THIRD PORTION
3AKEFIRST END FIFTH PORTION
3AKJSECOND END FIRST PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3AKNSECOND END FIFTH PORTION
3AKOSECOND END SIXTH PORTION
3AKPSECOND END SEVENTH PORTION
3ALBEITHER END THIRD PORTION
3ALFEITHER END EIGHTH PORTION
3ALGEITHER END TENTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABRV*JKEYWAY DEPTH
A MEASUREMENT FROM THE TOP SURFACE TO THE BOTTOM OF THE KEYWAY GROOVE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRV3AKLJAC2.0*;ABRV3AKLJAC2.0$JAC2.0*;ABRV3AKLJAC2.0$$JAC2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AEVBOTH ENDS
3AKCFIRST END THIRD PORTION
3AKEFIRST END FIFTH PORTION
3AKJSECOND END FIRST PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3AKNSECOND END FIFTH PORTION
3AKOSECOND END SIXTH PORTION
3AKPSECOND END SEVENTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
AJYP*DSCREW THREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF SCREW THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AJYP3AKCDNF*;AJYP3AKCDNF$DBX*;AJYP3AKCDNF$$DBX*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AEVBOTH ENDS
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKCFIRST END THIRD PORTION
3AKEFIRST END FIFTH PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3AKNSECOND END FIFTH PORTION
3AKOSECOND END SIXTH PORTION
3AKPSECOND END SEVENTH PORTION
3AKQSECOND END EIGHTH PORTION
3AKRSECOND END NINTH PORTION
3ALBEITHER END THIRD PORTION
3ALCEITHER END FIFTH PORTION
3ALDEITHER END SIXTH PORTION
3ALEEITHER END SEVENTH PORTION
3ALFEITHER END EIGHTH PORTION
3ALGEITHER END TENTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AH06)Reply
ENN-12
BXNC
SWSAE
AYSPECIAL
SASTUB ACME
ATTWPP
UNUN
FFUN-12
NEUNEF
DHUNEF-2A
NFUNF
NCUNIFIED NATIONAL COARSE (UNC)
JFUNIFIED NATIONAL JOINT FINE (UNJF)
NSUNS
AKAF*DSHAFT THREAD DIRECTION
THE DIRECTION OF THE SHAFT THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AKAF3ALBDAAG*;AKAF3ALBDAAG$DAAL*;AKAF3ALBDAAG$$DAAL*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AEVBOTH ENDS
3AJZEITHER END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKCFIRST END THIRD PORTION
3AKEFIRST END FIFTH PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3AKNSECOND END FIFTH PORTION
3AKOSECOND END SIXTH PORTION
3AKPSECOND END SEVENTH PORTION
3AKQSECOND END EIGHTH PORTION
3ALBEITHER END THIRD PORTION
3ALCEITHER END FIFTH PORTION
3ALDEITHER END SIXTH PORTION
3ALEEITHER END SEVENTH PORTION
3ALFEITHER END EIGHTH PORTION
3ALGEITHER END TENTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA38)Reply
AAGLEFT-HAND
AALRIGHT-HAND
AASA*JTHREAD LENGTH
A MEASUREMENT OF THE EXTENT OF THREADS,INCLUDING INCOMPLETE THREADS,ALONG A LINE PARALLEL TO THE LONGITUDINAL AXIS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AASA3AKPJAC2.0*;AASA3AKPJAC2.0$JAC2.0*;AASA3AKPJAC2.0$$JAC2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AEVBOTH ENDS
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKCFIRST END THIRD PORTION
3AKEFIRST END FIFTH PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3AKNSECOND END FIFTH PORTION
3AKOSECOND END SIXTH PORTION
3AKPSECOND END SEVENTH PORTION
3AKQSECOND END EIGHTH PORTION
3AKRSECOND END NINTH PORTION
3ALBEITHER END THIRD PORTION
3ALCEITHER END FIFTH PORTION
3ALDEITHER END SIXTH PORTION
3ALFEITHER END EIGHTH PORTION
3ALGEITHER END TENTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
IF STYLE/REPLY CODE(s) BDF WERE ENTERED FOR MRC CCKD, YOU MUST ANSWER MRC (CFQR and BDGL)
CCKD*DSECTION SHAPE
THE PHYSICAL CONFIGURATION OF THE SECTION(S).
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CCKD3AKKDAHH*;CCKD3AKKDAHH$DBDF*;CCKD3AKKDAHH$$DBDF*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AEVBOTH ENDS
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKCFIRST END THIRD PORTION
3AKDFIRST END FOURTH PORTION
3AKEFIRST END FIFTH PORTION
3AKJSECOND END FIRST PORTION
3AKKSECOND END SECOND PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3AKNSECOND END FIFTH PORTION
3AKTBOTH ENDS SECOND PORTION
3ALEEITHER END SEVENTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AD07)Reply
BDFD-SHAPE
AGDFLATTED ROUND
AHHHEXAGON
ASCSPHERICAL
ASLSQUARE
CFQR*JCIRCULAR PORTION RADIUS
A MEASUREMENT OF THE DISTANCE FROM THE CENTER OF THE ITEM TO THE CURVE OF THE CIRCULAR SECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFQR3AEUJAB2.0*;CFQR3AEUJAB2.0$JAB2.0*;CFQR3AEUJAB2.0$$JAB2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AEUSECOND END
3AKCFIRST END THIRD PORTION
3AKDFIRST END FOURTH PORTION
3AKKSECOND END SECOND PORTION
3ALCEITHER END FIFTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
BDGL*JDISTANCE FROM RADIAL CENTER TO FLAT SURFACE
THE DISTANCE FROM THE RADIAL CENTER TO THE FLAT SURFACE OF AN ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BDGL3AEEJAB2.0*;BDGL3AEEJAB2.0$JAB2.0*;BDGL3AEEJAB2.0$$JAB2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AEUSECOND END
3AKDFIRST END FOURTH PORTION
3AKKSECOND END SECOND PORTION
3ALCEITHER END FIFTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 3
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CFQQ*GSHAFT SECTION SIZE
THE DESIGNATION BY WHICH THE SIZE OF THE SHAFT SECTION(S) IS IDENTIFIED.
Enter the applicable ISAC from the table below, followed by the Mode Code and the clear text reply.
(CFQQ3AAEGCLEARTEXT)
Table 1
ISAC Field Indicator (5000)Location
3AAESECOND WINDING
3AETFIRST END
3AEUSECOND END
3AEVBOTH ENDS
3AJZEITHER END
3AKAFIRST END FIRST PORTION
3AKBFIRST END SECOND PORTION
3AKCFIRST END THIRD PORTION
3AKEFIRST END FIFTH PORTION
3AKLSECOND END THIRD PORTION
3AKMSECOND END FOURTH PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
IF YOU ANSWER MRC BYDT, YOU MUST ANSWER MRC (BDDY and CFQS)
BYDT*DBEARING TYPE
INDICATES THE TYPE OF BEARING PROVIDED.
Enter the applicable reply code from the table below
(BYDTDAJ)
Table 1
Reply Code (AH96)Reply
AEBALL
AJROLLER
BDDY*ABEARING QUANTITY
THE NUMBER OF BEARINGS PROVIDED ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(BDDYA10*)
CFQS*JBEARING DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BEARING,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CFQSJAA2.0*;CFQSJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
Table 1
Reply Code (AC28)Reply
ASPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BSTANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
CDRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
Table 1
Reply Code (AN62)Reply
VFEDERAL MOTOR VEHICLE SAFETY STANDARD
FFLAMMABILITY STANDARD
SGOVERNMENT SPECIFICATION
TGOVERNMENT STANDARD
UINTERNATIONAL STD/SPEC
DMANUFACTURERS SOURCE CONTROL
RMANUFACTURERS SPECIFICATION
NMANUFACTURERS SPECIFICATION CONTROL
MMANUFACTURERS STANDARD
BNATIONAL STD/SPEC
APROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
PPROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
Table 1
Reply Code (AD08)Reply
ALALLOY
BEANNEALED
ANANNEX
APAPPENDIX
ACAPPLICABILITY CLASS
ARARRANGEMENT
ASASSEMBLY
ABASSORTMENT
BFBOND
BXBOX
CYCAPACITY
CACASE
CTCATEGORY
CFCIRCUMFERENCE
CLCLASS
CECODE
CRCOLOR
CCCOMBINATION CODE
CNCOMPONENT
CPCOMPOSITION
CMCOMPOUND
CDCONDITION
AVCONFIGURATION
CSCONSTRUCTION
BGCORE CONDITION
CBCUT OFF
AMDELAY CLASS
DEDESIGN
DGDESIGNATOR
DWDRAWING NUMBER
DUDUPLEX
EGEDGE
ENEND
FYFAMILY
FGFIGURE
AKFILE NUMBER
FNFINISH
FBFLAVOR
BHFLUX PERCENTAGE
FMFORM
FAFORMULA
AJGAGE STOCK NUMBER
GRGRADE
GAGRADUATION
AXGRANULES
AYGRIT
GBGROUND
GPGROUP
HAHEAVY DUTY
BAIMAGE COLOR
NSINSERT
TMITEM
KDKIND
KTKIT
LGLENGTH
LVLEVEL
LTLIMIT
MKMARK
AAMARKER
ADMASK APERTURE
MLMATERIAL
BBMAXIMUM DENSITY
TAMEDIUM TEMPER
MHMESH
MEMETHOD
BCMINIMUM DENSITY
MDMODEL
MTMOUNTING
AQNATURAL
AUNON-DELAY CLASS
NRNUMBER
BLOUTFIT NUMBER
PAPARAGRAPH
PTPART
PNPATTERN
PCPHYSICAL CONDITION
PSPIECE
PLPLAN
PRPOINT
PDPOLISHED
PBPRESSURE RATING
QAQUALITY
QBQUENCHED
RNRANGE
AERAPID
RTRATING
RFREFERENCE NUMBER
RAREGULAR DUTY
BJRMA FLUX
SJSALIENT CHARACTERISTICS
SCSCHEDULE
SBSECTION
SLSELECTION
BDSERIALIZED
SESERIES
SVSERVICE
SXSET
SASHADE
SHSHAPE
SGSHEET
SZSIZE
AGSLOW
TCSOFT TEMPER
SKSOURCE
PZSPECIES
SQSPECIFICATION SHEET
SDSPEED
AWSTANDARD
SRSTRAIGHT
STSTYLE
SSSUBCLASS
SFSUBFORM
SPSUBTYPE
BKSUPPORT
SNSURFACE CONDITION
SYSYMBOL
SMSYSTEM
TBTABLE
TNTANNAGE
TPTEMPER
TXTEXTURE
TKTHICKNESS
TTTREATMENT
TRTRIM
TYTYPE
YNUNIT
AZUNSERIALIZED
VAVARIETY
WTWEIGHT
WDWIDTH
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
Table 1
Reply Code (AN58)Reply
AADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDIRA000*;PRMTDAGA000$DAZA000*;PRMTDAGA000$$DAZA000*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJPTA000R2.0*;PMWTJPTA000R2.0$$JPTA000R2.1*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
Table 2
Reply Code (AG14)Reply
EGRAINS, TROY
RGRAMS
FOUNCES, TROY
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAGA0002.0*;PMLCJAGA0002.0$JAGA0002.0*;PMLCJAGA0002.0$$JAGA0002.1*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCN2.0*)
Table 1
Reply Code (AN76)Reply
CNCUBIC INCHES
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)