A length of metallic hose with fittings on one or both ends. For items without fittings, see HOSE, METALLIC. Excludes:CONDUIT, ELECTRICAL; CONDUIT ASSEMBLY, ELECTRICAL; CASING, FLEXIBLE CONTROL; and CASING, FLEXIBLE SHAFT ASSEMBLY.
ISAC Reply 3AEE added to MRC MEDA.
ISAC Reply 3DQX added to MRC MEDA.
ISAC Reply 3DQY added to MRC MEDA.
ISAC Reply 3DQZ added to MRC MEDA.
ISAC Reply 3DRA added to MRC MEDA.
ISAC Reply 3DRB added to MRC MEDA.
ISAC Reply 3DRC added to MRC MEDA.
ISAC Reply 3HOU added to MRC MEDA.
ISAC Reply 1A deleted from MRC MEDA.
ISAC Reply 1B deleted from MRC MEDA.
ISAC Reply 1C deleted from MRC MEDA.
ISAC Reply 1D deleted from MRC MEDA.
ISAC Reply 1E deleted from MRC MEDA.
ISAC Reply 1F deleted from MRC MEDA.
ISAC Reply 3AEE added to MRC ABJH.
ISAC Reply 3DQX added to MRC ABJH.
ISAC Reply 3DQY added to MRC ABJH.
ISAC Reply 3DQZ added to MRC ABJH.
ISAC Reply 3HOU added to MRC ABJH.
ISAC Reply 1A deleted from MRC ABJH.
ISAC Reply 1B deleted from MRC ABJH.
ISAC Reply 1C deleted from MRC ABJH.
ISAC Reply 1D deleted from MRC ABJH.
ISAC Reply 1E deleted from MRC ABJH.
ISAC Reply 1F deleted from MRC ABJH.
ISAC Reply 3AEE added to MRC ABKG.
ISAC Reply 3AET added to MRC ABKG.
ISAC Reply 3AEU added to MRC ABKG.
ISAC Reply 3AEX added to MRC ABKG.
ISAC Reply 3HOU added to MRC ABKG.
ISAC Reply 1A deleted from MRC ABKG.
ISAC Reply 1B deleted from MRC ABKG.
ISAC Reply 1C deleted from MRC ABKG.
ISAC Reply 1D deleted from MRC ABKG.
ISAC Reply 1E deleted from MRC ABKG.
ISAC Reply 3AEE added to MRC ABKU.
ISAC Reply 3AET added to MRC ABKU.
ISAC Reply 3AEU added to MRC ABKU.
ISAC Reply 3AEV added to MRC ABKU.
ISAC Reply 3AEX added to MRC ABKU.
ISAC Reply 3HOU added to MRC ABKU.
ISAC Reply 1A deleted from MRC ABKU.
ISAC Reply 1B deleted from MRC ABKU.
ISAC Reply 1C deleted from MRC ABKU.
ISAC Reply 1D deleted from MRC ABKU.
ISAC Reply 1E deleted from MRC ABKU.
ISAC Reply 3AEE added to MRC AKXL.
ISAC Reply 3AET added to MRC AKXL.
ISAC Reply 3AEU added to MRC AKXL.
ISAC Reply 3AEV added to MRC AKXL.
ISAC Reply 3AEX added to MRC AKXL.
ISAC Reply 3HOU added to MRC AKXL.
ISAC Reply 1A deleted from MRC AKXL.
ISAC Reply 1B deleted from MRC AKXL.
ISAC Reply 1C deleted from MRC AKXL.
ISAC Reply 1D deleted from MRC AKXL.
ISAC Reply 1E deleted from MRC AKXL.
ISAC Reply 3AEE added to MRC AKXM.
ISAC Reply 3AET added to MRC AKXM.
ISAC Reply 3AEU added to MRC AKXM.
ISAC Reply 3AEX added to MRC AKXM.
ISAC Reply 3HOU added to MRC AKXM.
ISAC Reply 1A deleted from MRC AKXM.
ISAC Reply 1B deleted from MRC AKXM.
ISAC Reply 1C deleted from MRC AKXM.
ISAC Reply 1D deleted from MRC AKXM.
ISAC Reply 1E deleted from MRC AKXM.
ISAC Reply 3AAT added to MRC MDCL.
ISAC Reply 3ACU added to MRC MDCL.
ISAC Reply 3ADI added to MRC MDCL.
ISAC Reply 3ADP added to MRC MDCL.
ISAC Reply 3ADW added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3AUW added to MRC MDCL.
ISAC Reply 3AVU added to MRC MDCL.
ISAC Reply 3BAE added to MRC MDCL.
ISAC Reply 3BDP added to MRC MDCL.
ISAC Reply 3DPW added to MRC MDCL.
ISAC Reply 3DPY added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 2AA deleted from MRC MDCL.
ISAC Reply 2AB deleted from MRC MDCL.
ISAC Reply 2AC deleted from MRC MDCL.
ISAC Reply 2AD deleted from MRC MDCL.
ISAC Reply 2AE deleted from MRC MDCL.
ISAC Reply 2AF deleted from MRC MDCL.
ISAC Reply 2AG deleted from MRC MDCL.
ISAC Reply 2AH deleted from MRC MDCL.
ISAC Reply 2AJ deleted from MRC MDCL.
ISAC Reply 2AK deleted from MRC MDCL.
ISAC Reply 2AL deleted from MRC MDCL.
ISAC Reply 2AM deleted from MRC MDCL.
ISAC Reply 2AN deleted from MRC MDCL.
ISAC Reply 2AP deleted from MRC MDCL.
ISAC Reply 2AQ deleted from MRC MDCL.
ISAC Reply 2AR deleted from MRC MDCL.
ISAC Reply 2AT deleted from MRC MDCL.
ISAC Reply 2AV deleted from MRC MDCL.
ISAC Reply 2AW deleted from MRC MDCL.
ISAC Reply 2AX deleted from MRC MDCL.
ISAC Reply 2AY deleted from MRC MDCL.
ISAC Reply 2AZ deleted from MRC MDCL.
ISAC Reply 2BA deleted from MRC MDCL.
ISAC Reply 2BB deleted from MRC MDCL.
ISAC Reply 2BC deleted from MRC MDCL.
ISAC Reply 2BD deleted from MRC MDCL.
ISAC Reply 2BE deleted from MRC MDCL.
ISAC Reply 2BF deleted from MRC MDCL.
ISAC Reply 2BG deleted from MRC MDCL.
ISAC Reply 2BH deleted from MRC MDCL.
ISAC Reply 2BJ deleted from MRC MDCL.
ISAC Reply 2BK deleted from MRC MDCL.
ISAC Reply 2BL deleted from MRC MDCL.
ISAC Reply 2BM deleted from MRC MDCL.
ISAC Reply 2BN deleted from MRC MDCL.
ISAC Reply 2XX deleted from MRC MDCL.
ISAC Reply 3AAT added to MRC STDC.
ISAC Reply 3ADI added to MRC STDC.
ISAC Reply 3ADW added to MRC STDC.
ISAC Reply 3AEE added to MRC STDC.
ISAC Reply 3BAE added to MRC STDC.
ISAC Reply 3DPW added to MRC STDC.
ISAC Reply 3HOU added to MRC STDC.
ISAC Reply 2AA deleted from MRC STDC.
ISAC Reply 2AB deleted from MRC STDC.
ISAC Reply 2AC deleted from MRC STDC.
ISAC Reply 2AD deleted from MRC STDC.
ISAC Reply 2AE deleted from MRC STDC.
ISAC Reply 2AF deleted from MRC STDC.
ISAC Reply 2AG deleted from MRC STDC.
ISAC Reply 2AH deleted from MRC STDC.
ISAC Reply 2AJ deleted from MRC STDC.
ISAC Reply 2AK deleted from MRC STDC.
ISAC Reply 2AL deleted from MRC STDC.
ISAC Reply 2AM deleted from MRC STDC.
ISAC Reply 2AN deleted from MRC STDC.
ISAC Reply 2AP deleted from MRC STDC.
ISAC Reply 2AQ deleted from MRC STDC.
ISAC Reply 2AR deleted from MRC STDC.
ISAC Reply 2AT deleted from MRC STDC.
ISAC Reply 2AV deleted from MRC STDC.
ISAC Reply 2AW deleted from MRC STDC.
ISAC Reply 2AX deleted from MRC STDC.
ISAC Reply 2AY deleted from MRC STDC.
ISAC Reply 2AZ deleted from MRC STDC.
ISAC Reply 2BA deleted from MRC STDC.
ISAC Reply 2BB deleted from MRC STDC.
ISAC Reply 2BC deleted from MRC STDC.
ISAC Reply 2BD deleted from MRC STDC.
ISAC Reply 2BE deleted from MRC STDC.
ISAC Reply 2BF deleted from MRC STDC.
ISAC Reply 2BG deleted from MRC STDC.
ISAC Reply 2BH deleted from MRC STDC.
ISAC Reply 2BJ deleted from MRC STDC.
ISAC Reply 2BK deleted from MRC STDC.
ISAC Reply 2BL deleted from MRC STDC.
ISAC Reply 2BM deleted from MRC STDC.
ISAC Reply 2BN deleted from MRC STDC.
ISAC Reply 2XX deleted from MRC STDC.
ISAC Reply 3ABF added to MRC AWLS.
ISAC Reply 3AEE added to MRC AWLS.
ISAC Reply 3AET added to MRC AWLS.
ISAC Reply 3AEU added to MRC AWLS.
ISAC Reply 3AEV added to MRC AWLS.
ISAC Reply 3AEX added to MRC AWLS.
ISAC Reply 3AIB added to MRC AWLS.
ISAC Reply 3DRE added to MRC AWLS.
ISAC Reply 3DRJ added to MRC AWLS.
ISAC Reply 3DRN added to MRC AWLS.
ISAC Reply 3HOU added to MRC AWLS.
ISAC Reply 1A deleted from MRC AWLS.
ISAC Reply 1B deleted from MRC AWLS.
ISAC Reply 1C deleted from MRC AWLS.
ISAC Reply 1D deleted from MRC AWLS.
ISAC Reply 1E deleted from MRC AWLS.
ISAC Reply 1F deleted from MRC AWLS.
ISAC Reply 1G deleted from MRC AWLS.
ISAC Reply 1H deleted from MRC AWLS.
ISAC Reply 1J deleted from MRC AWLS.
ISAC Reply 1K deleted from MRC AWLS.
ISAC Reply 1L deleted from MRC AWLS.
ISAC Reply 1M deleted from MRC AWLS.
ISAC Reply 3AEE added to MRC AHNC.
ISAC Reply 3AET added to MRC AHNC.
ISAC Reply 3AEU added to MRC AHNC.
ISAC Reply 3AEV added to MRC AHNC.
ISAC Reply 3AEX added to MRC AHNC.
ISAC Reply 3HOU added to MRC AHNC.
ISAC Reply 1A deleted from MRC AHNC.
ISAC Reply 1B deleted from MRC AHNC.
ISAC Reply 1C deleted from MRC AHNC.
ISAC Reply 1D deleted from MRC AHNC.
ISAC Reply 1E deleted from MRC AHNC.
ISAC Reply 1F deleted from MRC AHNC.
ISAC Reply 1G deleted from MRC AHNC.
ISAC Reply 1H deleted from MRC AHNC.
ISAC Reply 1J deleted from MRC AHNC.
ISAC Reply 1K deleted from MRC AHNC.
ISAC Reply 1L deleted from MRC AHNC.
ISAC Reply 1M deleted from MRC AHNC.
ISAC Reply 3AEE added to MRC AJED.
ISAC Reply 3AET added to MRC AJED.
ISAC Reply 3AEU added to MRC AJED.
ISAC Reply 3AEX added to MRC AJED.
ISAC Reply 3HOU added to MRC AJED.
ISAC Reply 1A deleted from MRC AJED.
ISAC Reply 1B deleted from MRC AJED.
ISAC Reply 1C deleted from MRC AJED.
ISAC Reply 1D deleted from MRC AJED.
ISAC Reply 1E deleted from MRC AJED.
ISAC Reply 3AEE added to MRC AJEE.
ISAC Reply 3AET added to MRC AJEE.
ISAC Reply 3AEU added to MRC AJEE.
ISAC Reply 3AEX added to MRC AJEE.
ISAC Reply 3HOU added to MRC AJEE.
ISAC Reply 1A deleted from MRC AJEE.
ISAC Reply 1B deleted from MRC AJEE.
ISAC Reply 1C deleted from MRC AJEE.
ISAC Reply 1D deleted from MRC AJEE.
ISAC Reply 1E deleted from MRC AJEE.
ISAC Reply 3AEE added to MRC ABMD.
ISAC Reply 3AET added to MRC ABMD.
ISAC Reply 3AEU added to MRC ABMD.
ISAC Reply 3HOU added to MRC ABMD.
ISAC Reply 1A deleted from MRC ABMD.
ISAC Reply 1B deleted from MRC ABMD.
ISAC Reply 1C deleted from MRC ABMD.
ISAC Reply 1D deleted from MRC ABMD.
ISAC Reply 1E deleted from MRC ABMD.
ISAC Reply 3AEE added to MRC ABMH.
ISAC Reply 3AET added to MRC ABMH.
ISAC Reply 3AEU added to MRC ABMH.
ISAC Reply 3HOU added to MRC ABMH.
ISAC Reply 1A deleted from MRC ABMH.
ISAC Reply 1B deleted from MRC ABMH.
ISAC Reply 1C deleted from MRC ABMH.
ISAC Reply 1D deleted from MRC ABMH.
ISAC Reply 1E deleted from MRC ABMH.
ISAC Reply 3AEE added to MRC CQRB.
ISAC Reply 3AET added to MRC CQRB.
ISAC Reply 3AEU added to MRC CQRB.
ISAC Reply 3AEV added to MRC CQRB.
ISAC Reply 3AEX added to MRC CQRB.
ISAC Reply 3HOU added to MRC CQRB.
ISAC Reply 1A deleted from MRC CQRB.
ISAC Reply 1B deleted from MRC CQRB.
ISAC Reply 1C deleted from MRC CQRB.
ISAC Reply 1D deleted from MRC CQRB.
ISAC Reply 1E deleted from MRC CQRB.
ISAC Reply 1F deleted from MRC CQRB.
ISAC Reply 1G deleted from MRC CQRB.
ISAC Reply 1H deleted from MRC CQRB.
ISAC Reply 1J deleted from MRC CQRB.
ISAC Reply 1K deleted from MRC CQRB.
ISAC Reply 1L deleted from MRC CQRB.
ISAC Reply 1M deleted from MRC CQRB.
ISAC Reply 3AEE added to MRC AKUT.
ISAC Reply 3AET added to MRC AKUT.
ISAC Reply 3AEU added to MRC AKUT.
ISAC Reply 3AEX added to MRC AKUT.
ISAC Reply 3DRE added to MRC AKUT.
ISAC Reply 3HOU added to MRC AKUT.
ISAC Reply 1A deleted from MRC AKUT.
ISAC Reply 1B deleted from MRC AKUT.
ISAC Reply 1C deleted from MRC AKUT.
ISAC Reply 1D deleted from MRC AKUT.
ISAC Reply 1E deleted from MRC AKUT.
ISAC Reply 1F deleted from MRC AKUT.
ISAC Reply 1G deleted from MRC AKUT.
ISAC Reply 1H deleted from MRC AKUT.
ISAC Reply 1J deleted from MRC AKUT.
ISAC Reply 1K deleted from MRC AKUT.
ISAC Reply 1L deleted from MRC AKUT.
ISAC Reply 1M deleted from MRC AKUT.
ISAC Reply 3AEE added to MRC CWBZ.
ISAC Reply 3AET added to MRC CWBZ.
ISAC Reply 3AEU added to MRC CWBZ.
ISAC Reply 3AEX added to MRC CWBZ.
ISAC Reply 3HOU added to MRC CWBZ.
ISAC Reply 1A deleted from MRC CWBZ.
ISAC Reply 1B deleted from MRC CWBZ.
ISAC Reply 1C deleted from MRC CWBZ.
ISAC Reply 1D deleted from MRC CWBZ.
ISAC Reply 1E deleted from MRC CWBZ.
ISAC Reply 1F deleted from MRC CWBZ.
ISAC Reply 1G deleted from MRC CWBZ.
ISAC Reply 1H deleted from MRC CWBZ.
ISAC Reply 1J deleted from MRC CWBZ.
ISAC Reply 1K deleted from MRC CWBZ.
ISAC Reply 1L deleted from MRC CWBZ.
ISAC Reply 1M deleted from MRC CWBZ.
ISAC Reply 3AEE added to MRC CTCJ.
ISAC Reply 3AET added to MRC CTCJ.
ISAC Reply 3AEU added to MRC CTCJ.
ISAC Reply 3AEX added to MRC CTCJ.
ISAC Reply 3DRJ added to MRC CTCJ.
ISAC Reply 3HOU added to MRC CTCJ.
ISAC Reply 1A deleted from MRC CTCJ.
ISAC Reply 1B deleted from MRC CTCJ.
ISAC Reply 1C deleted from MRC CTCJ.
ISAC Reply 1D deleted from MRC CTCJ.
ISAC Reply 1E deleted from MRC CTCJ.
ISAC Reply 1F deleted from MRC CTCJ.
ISAC Reply 1G deleted from MRC CTCJ.
ISAC Reply 1H deleted from MRC CTCJ.
ISAC Reply 1J deleted from MRC CTCJ.
ISAC Reply 1K deleted from MRC CTCJ.
ISAC Reply 1L deleted from MRC CTCJ.
ISAC Reply 1M deleted from MRC CTCJ.
ISAC Reply 3AEE added to MRC AHNX.
ISAC Reply 3AET added to MRC AHNX.
ISAC Reply 3AEU added to MRC AHNX.
ISAC Reply 3AEX added to MRC AHNX.
ISAC Reply 3DRE added to MRC AHNX.
ISAC Reply 3HOU added to MRC AHNX.
ISAC Reply 1A deleted from MRC AHNX.
ISAC Reply 1B deleted from MRC AHNX.
ISAC Reply 1C deleted from MRC AHNX.
ISAC Reply 1D deleted from MRC AHNX.
ISAC Reply 1E deleted from MRC AHNX.
ISAC Reply 3AEE added to MRC AEPR.
ISAC Reply 3AET added to MRC AEPR.
ISAC Reply 3AEU added to MRC AEPR.
ISAC Reply 3AEV added to MRC AEPR.
ISAC Reply 3AEX added to MRC AEPR.
ISAC Reply 3HOU added to MRC AEPR.
ISAC Reply 1A deleted from MRC AEPR.
ISAC Reply 1B deleted from MRC AEPR.
ISAC Reply 1C deleted from MRC AEPR.
ISAC Reply 1D deleted from MRC AEPR.
ISAC Reply 1E deleted from MRC AEPR.
ISAC Reply 3AEE added to MRC AFQN.
ISAC Reply 3AET added to MRC AFQN.
ISAC Reply 3AEU added to MRC AFQN.
ISAC Reply 3AEV added to MRC AFQN.
ISAC Reply 3AEX added to MRC AFQN.
ISAC Reply 3HOU added to MRC AFQN.
ISAC Reply 1A deleted from MRC AFQN.
ISAC Reply 1B deleted from MRC AFQN.
ISAC Reply 1C deleted from MRC AFQN.
ISAC Reply 1D deleted from MRC AFQN.
ISAC Reply 1E deleted from MRC AFQN.
ISAC Reply 3AEE added to MRC AGFF.
ISAC Reply 3AET added to MRC AGFF.
ISAC Reply 3AEU added to MRC AGFF.
ISAC Reply 3AEV added to MRC AGFF.
ISAC Reply 3AEX added to MRC AGFF.
ISAC Reply 3HOU added to MRC AGFF.
ISAC Reply 1A deleted from MRC AGFF.
ISAC Reply 1B deleted from MRC AGFF.
ISAC Reply 1C deleted from MRC AGFF.
ISAC Reply 1D deleted from MRC AGFF.
ISAC Reply 1E deleted from MRC AGFF.
ISAC Reply 3AEE added to MRC ADUZ.
ISAC Reply 3AET added to MRC ADUZ.
ISAC Reply 3AEU added to MRC ADUZ.
ISAC Reply 3AEX added to MRC ADUZ.
ISAC Reply 3HOU added to MRC ADUZ.
ISAC Reply 1A deleted from MRC ADUZ.
ISAC Reply 1B deleted from MRC ADUZ.
ISAC Reply 1C deleted from MRC ADUZ.
ISAC Reply 1D deleted from MRC ADUZ.
ISAC Reply 1E deleted from MRC ADUZ.
ISAC Reply 3AEE added to MRC ADUY.
ISAC Reply 3AET added to MRC ADUY.
ISAC Reply 3AEU added to MRC ADUY.
ISAC Reply 3HOU added to MRC ADUY.
ISAC Reply 1A deleted from MRC ADUY.
ISAC Reply 1B deleted from MRC ADUY.
ISAC Reply 1C deleted from MRC ADUY.
ISAC Reply 1D deleted from MRC ADUY.
ISAC Reply 1E deleted from MRC ADUY.
ISAC Reply 3AEE added to MRC AKUU.
ISAC Reply 3AET added to MRC AKUU.
ISAC Reply 3AEU added to MRC AKUU.
ISAC Reply 3AEV added to MRC AKUU.
ISAC Reply 3AEX added to MRC AKUU.
ISAC Reply 3HOU added to MRC AKUU.
ISAC Reply 1A deleted from MRC AKUU.
ISAC Reply 1B deleted from MRC AKUU.
ISAC Reply 1C deleted from MRC AKUU.
ISAC Reply 1D deleted from MRC AKUU.
ISAC Reply 1E deleted from MRC AKUU.
ISAC Reply 1F deleted from MRC AKUU.
ISAC Reply 1G deleted from MRC AKUU.
ISAC Reply 1H deleted from MRC AKUU.
ISAC Reply 1J deleted from MRC AKUU.
ISAC Reply 1K deleted from MRC AKUU.
ISAC Reply 1L deleted from MRC AKUU.
ISAC Reply 1M deleted from MRC AKUU.
ISAC Reply 3AEE added to MRC CRFY.
ISAC Reply 3AET added to MRC CRFY.
ISAC Reply 3AEU added to MRC CRFY.
ISAC Reply 3AEV added to MRC CRFY.
ISAC Reply 3AEX added to MRC CRFY.
ISAC Reply 3DRD added to MRC CRFY.
ISAC Reply 3HOU added to MRC CRFY.
ISAC Reply 1A deleted from MRC CRFY.
ISAC Reply 1B deleted from MRC CRFY.
ISAC Reply 1C deleted from MRC CRFY.
ISAC Reply 1D deleted from MRC CRFY.
ISAC Reply 1E deleted from MRC CRFY.
ISAC Reply 1F deleted from MRC CRFY.
ISAC Reply 1G deleted from MRC CRFY.
ISAC Reply 1H deleted from MRC CRFY.
ISAC Reply 1J deleted from MRC CRFY.
ISAC Reply 1K deleted from MRC CRFY.
ISAC Reply 1L deleted from MRC CRFY.
ISAC Reply 1M deleted from MRC CRFY.
ISAC Reply 3AEE added to MRC THSD.
ISAC Reply 3AET added to MRC THSD.
ISAC Reply 3AEU added to MRC THSD.
ISAC Reply 3AEV added to MRC THSD.
ISAC Reply 3AEX added to MRC THSD.
ISAC Reply 3HOU added to MRC THSD.
ISAC Reply 1A deleted from MRC THSD.
ISAC Reply 1B deleted from MRC THSD.
ISAC Reply 1C deleted from MRC THSD.
ISAC Reply 1D deleted from MRC THSD.
ISAC Reply 1E deleted from MRC THSD.
ISAC Reply 1F deleted from MRC THSD.
ISAC Reply 1G deleted from MRC THSD.
ISAC Reply 1H deleted from MRC THSD.
ISAC Reply 1J deleted from MRC THSD.
ISAC Reply 1K deleted from MRC THSD.
ISAC Reply 1L deleted from MRC THSD.
ISAC Reply 1M deleted from MRC THSD.
ISAC Reply 3AEE added to MRC CQJX.
ISAC Reply 3AET added to MRC CQJX.
ISAC Reply 3AEU added to MRC CQJX.
ISAC Reply 3AEV added to MRC CQJX.
ISAC Reply 3AEX added to MRC CQJX.
ISAC Reply 3DRE added to MRC CQJX.
ISAC Reply 3HOU added to MRC CQJX.
ISAC Reply 1A deleted from MRC CQJX.
ISAC Reply 1B deleted from MRC CQJX.
ISAC Reply 1C deleted from MRC CQJX.
ISAC Reply 1D deleted from MRC CQJX.
ISAC Reply 1E deleted from MRC CQJX.
ISAC Reply 1F deleted from MRC CQJX.
ISAC Reply 1G deleted from MRC CQJX.
ISAC Reply 1H deleted from MRC CQJX.
ISAC Reply 1J deleted from MRC CQJX.
ISAC Reply 1K deleted from MRC CQJX.
ISAC Reply 1L deleted from MRC CQJX.
ISAC Reply 1M deleted from MRC CQJX.
ISAC Reply 3AEE added to MRC CMLP.
ISAC Reply 3AET added to MRC CMLP.
ISAC Reply 3AEU added to MRC CMLP.
ISAC Reply 3AEV added to MRC CMLP.
ISAC Reply 3AEX added to MRC CMLP.
ISAC Reply 3HOU added to MRC CMLP.
ISAC Reply 1A deleted from MRC CMLP.
ISAC Reply 1B deleted from MRC CMLP.
ISAC Reply 1C deleted from MRC CMLP.
ISAC Reply 1D deleted from MRC CMLP.
ISAC Reply 1E deleted from MRC CMLP.
ISAC Reply 1F deleted from MRC CMLP.
ISAC Reply 1G deleted from MRC CMLP.
ISAC Reply 1H deleted from MRC CMLP.
ISAC Reply 1J deleted from MRC CMLP.
ISAC Reply 1K deleted from MRC CMLP.
ISAC Reply 1L deleted from MRC CMLP.
ISAC Reply 1M deleted from MRC CMLP.
ISAC Reply 3AEE added to MRC AAJD.
ISAC Reply 3AET added to MRC AAJD.
ISAC Reply 3AEU added to MRC AAJD.
ISAC Reply 3AEX added to MRC AAJD.
ISAC Reply 3HOU added to MRC AAJD.
ISAC Reply 1A deleted from MRC AAJD.
ISAC Reply 1B deleted from MRC AAJD.
ISAC Reply 1C deleted from MRC AAJD.
ISAC Reply 1D deleted from MRC AAJD.
ISAC Reply 1E deleted from MRC AAJD.
ISAC Reply 1F deleted from MRC AAJD.
ISAC Reply 1G deleted from MRC AAJD.
ISAC Reply 1H deleted from MRC AAJD.
ISAC Reply 1J deleted from MRC AAJD.
ISAC Reply 1K deleted from MRC AAJD.
ISAC Reply 1L deleted from MRC AAJD.
ISAC Reply 1M deleted from MRC AAJD.
ISAC Reply 3AEE added to MRC AAJE.
ISAC Reply 3AET added to MRC AAJE.
ISAC Reply 3AEU added to MRC AAJE.
ISAC Reply 3AEV added to MRC AAJE.
ISAC Reply 3AEX added to MRC AAJE.
ISAC Reply 3HOU added to MRC AAJE.
ISAC Reply 1A deleted from MRC AAJE.
ISAC Reply 1B deleted from MRC AAJE.
ISAC Reply 1C deleted from MRC AAJE.
ISAC Reply 1D deleted from MRC AAJE.
ISAC Reply 1E deleted from MRC AAJE.
ISAC Reply 1F deleted from MRC AAJE.
ISAC Reply 1G deleted from MRC AAJE.
ISAC Reply 1H deleted from MRC AAJE.
ISAC Reply 1J deleted from MRC AAJE.
ISAC Reply 1K deleted from MRC AAJE.
ISAC Reply 1L deleted from MRC AAJE.
ISAC Reply 1M deleted from MRC AAJE.
ISAC Reply 3AEE added to MRC CQQR.
ISAC Reply 3AET added to MRC CQQR.
ISAC Reply 3AEU added to MRC CQQR.
ISAC Reply 3AEX added to MRC CQQR.
ISAC Reply 3HOU added to MRC CQQR.
ISAC Reply 1A deleted from MRC CQQR.
ISAC Reply 1B deleted from MRC CQQR.
ISAC Reply 1C deleted from MRC CQQR.
ISAC Reply 1D deleted from MRC CQQR.
ISAC Reply 1E deleted from MRC CQQR.
ISAC Reply 1F deleted from MRC CQQR.
ISAC Reply 1G deleted from MRC CQQR.
ISAC Reply 1H deleted from MRC CQQR.
ISAC Reply 1J deleted from MRC CQQR.
ISAC Reply 1K deleted from MRC CQQR.
ISAC Reply 1L deleted from MRC CQQR.
ISAC Reply 1M deleted from MRC CQQR.
ISAC Reply 3AEE added to MRC CTTC.
ISAC Reply 3AET added to MRC CTTC.
ISAC Reply 3AEU added to MRC CTTC.
ISAC Reply 3AEX added to MRC CTTC.
ISAC Reply 3HOU added to MRC CTTC.
ISAC Reply 1A deleted from MRC CTTC.
ISAC Reply 1B deleted from MRC CTTC.
ISAC Reply 1C deleted from MRC CTTC.
ISAC Reply 1D deleted from MRC CTTC.
ISAC Reply 1E deleted from MRC CTTC.
ISAC Reply 1F deleted from MRC CTTC.
ISAC Reply 1G deleted from MRC CTTC.
ISAC Reply 1H deleted from MRC CTTC.
ISAC Reply 1J deleted from MRC CTTC.
ISAC Reply 1K deleted from MRC CTTC.
ISAC Reply 1L deleted from MRC CTTC.
ISAC Reply 1M deleted from MRC CTTC.
ISAC Reply 3AEE added to MRC AAJF.
ISAC Reply 3AET added to MRC AAJF.
ISAC Reply 3AEU added to MRC AAJF.
ISAC Reply 3AEV added to MRC AAJF.
ISAC Reply 3AEX added to MRC AAJF.
ISAC Reply 3HOU added to MRC AAJF.
ISAC Reply 1A deleted from MRC AAJF.
ISAC Reply 1B deleted from MRC AAJF.
ISAC Reply 1C deleted from MRC AAJF.
ISAC Reply 1D deleted from MRC AAJF.
ISAC Reply 1E deleted from MRC AAJF.
ISAC Reply 1F deleted from MRC AAJF.
ISAC Reply 1G deleted from MRC AAJF.
ISAC Reply 1H deleted from MRC AAJF.
ISAC Reply 1J deleted from MRC AAJF.
ISAC Reply 1K deleted from MRC AAJF.
ISAC Reply 1L deleted from MRC AAJF.
ISAC Reply 1M deleted from MRC AAJF.
ISAC Reply 3ABF added to MRC AAAR.
ISAC Reply 3AEE added to MRC AAAR.
ISAC Reply 3AET added to MRC AAAR.
ISAC Reply 3AEU added to MRC AAAR.
ISAC Reply 3AEX added to MRC AAAR.
ISAC Reply 3DRD added to MRC AAAR.
ISAC Reply 3DRE added to MRC AAAR.
ISAC Reply 3DRJ added to MRC AAAR.
ISAC Reply 3HOU added to MRC AAAR.
ISAC Reply 1A deleted from MRC AAAR.
ISAC Reply 1B deleted from MRC AAAR.
ISAC Reply 1C deleted from MRC AAAR.
ISAC Reply 1D deleted from MRC AAAR.
ISAC Reply 1E deleted from MRC AAAR.
ISAC Reply 1F deleted from MRC AAAR.
ISAC Reply 1G deleted from MRC AAAR.
ISAC Reply 1H deleted from MRC AAAR.
ISAC Reply 1J deleted from MRC AAAR.
ISAC Reply 1K deleted from MRC AAAR.
ISAC Reply 1L deleted from MRC AAAR.
ISAC Reply 1M deleted from MRC AAAR.
ISAC Reply 3AEE added to MRC CWFD.
ISAC Reply 3AET added to MRC CWFD.
ISAC Reply 3AEU added to MRC CWFD.
ISAC Reply 3AEX added to MRC CWFD.
ISAC Reply 3DRJ added to MRC CWFD.
ISAC Reply 3HOU added to MRC CWFD.
ISAC Reply 1A deleted from MRC CWFD.
ISAC Reply 1B deleted from MRC CWFD.
ISAC Reply 1C deleted from MRC CWFD.
ISAC Reply 1D deleted from MRC CWFD.
ISAC Reply 1E deleted from MRC CWFD.
ISAC Reply 1F deleted from MRC CWFD.
ISAC Reply 1G deleted from MRC CWFD.
ISAC Reply 1H deleted from MRC CWFD.
ISAC Reply 1J deleted from MRC CWFD.
ISAC Reply 1K deleted from MRC CWFD.
ISAC Reply 1L deleted from MRC CWFD.
ISAC Reply 1M deleted from MRC CWFD.
ISAC Reply 3AEE added to MRC ADLP.
ISAC Reply 3AET added to MRC ADLP.
ISAC Reply 3AEU added to MRC ADLP.
ISAC Reply 3AEX added to MRC ADLP.
ISAC Reply 3DRJ added to MRC ADLP.
ISAC Reply 3HOU added to MRC ADLP.
ISAC Reply 1A deleted from MRC ADLP.
ISAC Reply 1B deleted from MRC ADLP.
ISAC Reply 1C deleted from MRC ADLP.
ISAC Reply 1D deleted from MRC ADLP.
ISAC Reply 1E deleted from MRC ADLP.
ISAC Reply 1F deleted from MRC ADLP.
ISAC Reply 1G deleted from MRC ADLP.
ISAC Reply 1H deleted from MRC ADLP.
ISAC Reply 1J deleted from MRC ADLP.
ISAC Reply 1K deleted from MRC ADLP.
ISAC Reply 1L deleted from MRC ADLP.
ISAC Reply 1M deleted from MRC ADLP.
ISAC Reply 3AEE added to MRC CWDW.
ISAC Reply 3AET added to MRC CWDW.
ISAC Reply 3AEU added to MRC CWDW.
ISAC Reply 3AEV added to MRC CWDW.
ISAC Reply 3AEX added to MRC CWDW.
ISAC Reply 3HOU added to MRC CWDW.
ISAC Reply 1A deleted from MRC CWDW.
ISAC Reply 1B deleted from MRC CWDW.
ISAC Reply 1C deleted from MRC CWDW.
ISAC Reply 1D deleted from MRC CWDW.
ISAC Reply 1E deleted from MRC CWDW.
ISAC Reply 1F deleted from MRC CWDW.
ISAC Reply 1G deleted from MRC CWDW.
ISAC Reply 1H deleted from MRC CWDW.
ISAC Reply 1J deleted from MRC CWDW.
ISAC Reply 1K deleted from MRC CWDW.
ISAC Reply 1L deleted from MRC CWDW.
ISAC Reply 1M deleted from MRC CWDW.
ISAC Reply 3AEE added to MRC AECS.
ISAC Reply 3AET added to MRC AECS.
ISAC Reply 3AEU added to MRC AECS.
ISAC Reply 3AEX added to MRC AECS.
ISAC Reply 3HOU added to MRC AECS.
ISAC Reply 1A deleted from MRC AECS.
ISAC Reply 1B deleted from MRC AECS.
ISAC Reply 1C deleted from MRC AECS.
ISAC Reply 1D deleted from MRC AECS.
ISAC Reply 1E deleted from MRC AECS.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED17972*)
CQBC*JMINIMUM TENSILE STRENGTH
THE MAXIMUM RATED LOAD IN TENSION APPLIED IN A LONGITUDINAL DIRECTION,PER UNIT OF CROSS-SECTIONAL AREA,THAT THE MATERIAL CAN WITHSTAND WITHOUT RUPTURE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CQBCJNTEXT1234*)
| Table 1 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
MEDADMEDIA FOR WHICH DESIGNED
THE TYPE OF MEDIA FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MEDA3DRBDAAR*;MEDA3DRBDAAR$DACW*;MEDA3DRBDAAR$$DACW*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3DRA | THIRD RESPONSE |
| 3DRB | FOURTH RESPONSE |
| 3DRC | FIFTH RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN91) | Reply |
| AAB | ACETYLENE |
| AAC | ACID |
| ACH | ACID, NITRIC |
| AAD | AGRICULTURAL SPRAY SOLUTION |
| AAE | AIR |
| ABW | ALCOHOL |
| AAF | ALCOHOL, ETHYL |
| AAG | ALCOHOL, METHYL |
| AAH | AMMONIA, GASEOUS |
| AAJ | AMMONIA, LIQUID |
| ABH | BRAKE FLUID, NONMINERAL OIL |
| AAK | BROMOCHLOROMETHANE |
| AAL | BUTANE |
| AAM | CARBON DIOXIDE |
| ACW | CHEMICAL |
| AEM | DETERGENT |
| AHG | DRY CHEMICAL |
| AEN | EFFLUENT, DOMESTIC |
| AAN | ETHYLENE GLYCOL |
| ADS | ETHYLENE GLYCOL/WATER MIXTURE |
| ADG | FLUID |
| AHH | FOAM LIQUID |
| ACR | FUEL |
| ACX | FUEL, DIESEL |
| AAY | FUEL/OIL, HYDROCARBON |
| AAP | FUMIGANT |
| AAQ | GAS |
| AEP | GAS, EXHAUST |
| ABA | GAS, INERT |
| ABD | GAS, NATURAL |
| AAR | GREASE |
| AAS | HYDRAULIC FLUID |
| ADB | HYDRAULIC FLUID, MIL-H-5606 |
| AAW | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE |
| AAX | HYDRAULIC FLUID, SILICATE-ESTER BASE |
| AAT | HYDRAULIC FLUID, WATER BASE |
| AAZ | HYDROGEN |
| ABB | LIQUID, INGESTED |
| AGD | LUBRICANT, PETROLEUM BASE |
| AJW | METHANOL |
| ABE | NITROGEN, GASEOUS |
| ABF | NITROGEN, LIQUID |
| AGW | NITROUS OXIDE |
| ACJ | OIL |
| ABC | OIL, LUBRICATING, DIESTER BASE |
| ABJ | OXYGEN, GASEOUS |
| ABK | OXYGEN, LIQUID |
| ABL | PAINT |
| ACK | PROPANE |
| AFD | REFRIGERANT |
| AFE | REFRIGERANT 114 |
| ABM | REFRIGERANT 12 |
| ABN | REFRIGERANT 13 |
| ACM | REFRIGERANT 22 |
| AEX | SAND |
| AGX | SILICON FLUID |
| AEH | SOLVENT |
| ABP | STEAM |
| ABQ | TRICHLOROETHYLENE |
| ADK | VACUUM |
| AHK | VAPORIZING LIQUID |
| ABR | WATER |
| AHC | WATER, DRINKING |
| ABS | WATER, FRESH |
| ABT | WATER, SALT |
| AKC | WATER-GLYCOL |
ABJH*JTEMP RATING
A VALUE WHICH EXPRESSES THE DEGREE OF HEAT OR COLD AS APPLIED TO THE OPERATION,OR LIMITATION OF OPERATION,OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit as in the first and second examples.For negative temperature values, precede the numeric portion of the reply with the letter “M” as in the third and fourth examples.If ISAC coding is authorized for this requirement and one or more of the temperature values in negative, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.Also precede the numeric portion of the reply with the letter “M” as in the fifth and sixth examples.
(ABJHJF68.0*; ABJHJC0.0$$JC35.0*; ABJHJFCM15.0*; ABJHJFM40.0$$JF75.0*; ABJH1BJFM25.0*; ABJH1BJCM35.0$$JCM5.0*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
CQGM*JMAXIMUM OPERATING PRESSURE
THE MAXIMUM PRESSURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQGMJP2.0*)
| Table 1 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
CRDW*JHYDROSTATIC TEST PRESSURE
A STEADY,UNIFORM,INTERNAL,STATIC PRESSURE THAT THE ITEM MUST WITHSTAND WITHOUT LEAKAGE,ABNORMAL DISTORTION,OR DAMAGE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRDWJL2.0*)
| Table 1 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
CQBD*JBURST TEST PRESSURE
THE MINIMUM INTERNAL PRESSURE RATING,DETERMINED BY DESTRUCTION TESTS,AT WHICH THE ITEM CAN BE EXPECTED TO RUPTURE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQBDJP2.0*)
| Table 1 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
CRSM*BVACUUM IN TORR
THE ULTIMATE MAXIMUM VACUUM,EXPRESSED IN TERMS OF ABSOLUTE PRESSURE,THAT MAY BE PRODUCED BY OR APPLIED TO AN ITEM.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CRSMB2.0)
ADJS*DEXTERIOR COLOR
THE HUE OR TINT OF THE EXTERIOR OF THE ITEM.
Enter the applicable reply code from the table below
(ADJSDYE0000*;ADJSDGR0000$DTA0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BR0000 | BROWN |
| CL0000 | CLEAR |
| CR0000 | CREAM |
| GL0000 | GOLD |
| GY0002 | GRAY, LIGHT |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0011 | GREEN, OLIVE |
| MA0000 | MAROON |
| NA0000 | NATURAL |
| NA0001 | NATURAL METALLIC |
| LD0000 | OLIVE DRAB |
| RG0000 | ORANGE |
| RE0000 | RED |
| SL0000 | SILVER |
| TA0000 | TAN |
| WH0000 | WHITE |
| WH0012 | WHITE, TRANSLUCENT |
| YE0000 | YELLOW |
| YE0046 | YELLOW, TRANSPARENT |
CRJM*DOUTER COVERING ENVIRONMENTAL PROTECTION
THE TYPE OF PROTECTION PROVIDED BY THE OUTER COVERING.
Enter the applicable reply code from the table below
(CRJMDACC*;CRJMDACK$$DAJC*)
| Table 1 |
| Reply Code (AA65) | Reply |
| ABX | ABRASION RESISTANT |
| ABY | ACID RESISTANT |
| AEQ | AGE RESISTANT |
| ABZ | ALCOHOL RESISTANT |
| ACK | ALKALI RESISTANT |
| AAB | CHEMICAL RESISTANT |
| ACB | COLD RESISTANT |
| AAC | CORROSION RESISTANT |
| AHZ | ESTER RESISTANT |
| AJA | ETHYLENE GLYCOL RESISTANT |
| AAJ | FIRE RESISTANT |
| AGC | FIRE RETARDANT |
| AAL | FUEL RESISTANT |
| ACQ | GREASE RESISTANT |
| AAP | HEAT RESISTANT |
| AEL | HYDRAULIC FLUID |
| ADS | HYDRAULIC SOLUTION RESISTANT |
| AJB | INCOMBUSTIBLE |
| ACR | KETONE RESISTANT |
| AEM | LIGHT RESISTANT |
| AGF | LOW TEMPERATURE |
| ACC | MILDEW RESISTANT |
| AAX | OIL RESISTANT |
| AJC | OXIDATION RESISTANT |
| ACN | OZONE RESISTANT |
| AJD | PAINT RESISTANT |
| ABA | SALT WATER RESISTANT |
| ABE | SHOCK RESISTANT |
| ABF | SOLVENT RESISTANT |
| ABT | SPRAY TIGHT |
| ACW | STEAM RESISTANT |
| ADZ | VERMIN PROOF |
| ABH | VIBRATION PROOF |
| ABJ | VIBRATION RESISTANT |
| ACM | WATER RESISTANT |
| ABK | WATERPROOF |
| ABM | WEATHERPROOF |
CQCS*HLAYER COMPOSITION AND LOCATION
THE MATERIAL AND FORMATION IDENTIFYING THE STRUCTURAL CHARACTERISTIC/S/ OF THE ITEM AND LOCATION.
Enter the applicable Reply Code from Tables 1 & 2 below.
(CQCSHDBG2.0*;CQCSHDBG2.0$HDBG2.0*;CQCSHDBG2.0$$HDBG2.1*)
| Table 1 |
| Reply Code (AN92) | Reply |
| L | 10TH LAYER |
| M | 11TH LAYER |
| B | 1ST LAYER |
| C | 2ND LAYER |
| D | 3RD LAYER |
| E | 4TH LAYER |
| F | 5TH LAYER |
| G | 6TH LAYER |
| H | 7TH LAYER |
| J | 8TH LAYER |
| K | 9TH LAYER |
| N | OUTER LAYER |
| Table 2 |
| Reply Code (AD14) | Reply |
| AD | BRAIDED ALUMINUM ALLOY WIRE |
| FX | BRAIDED ASBESTOS CORD |
| DE | BRAIDED BRONZE WIRE |
| AE | BRAIDED COPPER WIRE |
| AG | BRAIDED CORROSION RESISTANT STEEL WIRE |
| KL | BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE |
| ZZ | BRAIDED COTTON CORD |
| EW | BRAIDED FABRIC |
| DX | BRAIDED FIBER |
| KM | BRAIDED NICKEL COPPER ALLOY WIRE |
| AB | BRAIDED POLYAMIDE CORD |
| FP | BRAIDED POLYESTER CORD |
| AC | BRAIDED RAYON CORD |
| EA | BRAIDED SISAL FIBER |
| AF | BRAIDED STEEL WIRE |
| EF | BRAIDED SYNTHETIC CORD |
| EQ | BRAIDED TEXTILE YARN |
| DM | BRAIDED WIRE |
| AJ | CORRUGATED ALUMINUM ALLOY |
| AK | CORRUGATED COPPER |
| AL | CORRUGATED CORROSION RESISTANT STEEL |
| AM | CORRUGATED STEEL |
| SK | CORRUGATED, POLYVINYLCHLORIDE |
| EV | CORRUGATIONS FILLED WITH RUBBER CEMENT |
| FE | COTTON |
| MN | FIBERGLASS CLOTH |
| FU | FIBERGLASS UNBONDED WITH ALUMINUM TAPE |
| AR | HELIX ALUMINUM ALLOY COIL |
| AS | HELIX COPPER COIL |
| AT | HELIX CORROSION RESISTANT STEEL COIL |
| AU | HELIX STEEL COIL |
| DQ | HELIX WIRE COIL |
| SL | HELIX, NYLON MONOFILAMENT |
| FK | LINEN |
| KN | MOLDED PLASTIC |
| AV | MOLDED POLYTETRAFLUOROETHYLENE |
| KP | MOLDED POLYURETHANE |
| AW | MOLDED RUBBER |
| FG | MOLDED RUBBER, BUNA-N |
| GA | MOLDED RUBBER, BUNA-S |
| DD | MOLDED RUBBER, CHLOROPRENE |
| DB | MOLDED RUBBER, COMPOSITION |
| KQ | MOLDED RUBBER, ETHYLENE PROPYLENE |
| EB | MOLDED RUBBER, NATURAL |
| HP | MOLDED RUBBER, NEOPRENE |
| KJ | MOLDED RUBBER, NITRILE |
| DA | MOLDED RUBBER, SYNTHETIC |
| PJ | PLASTIC, POLYVINYL CHLORIDE |
| SS | PLASTIC, TETRAFLUOROETHYLENE |
| GK | POLYESTER |
| DR | POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER |
| FY | RUBBER COMPOSITION |
| BC | RUBBER IMPREGNATED BRAIDED ALUMINUM ALLOY WIRE |
| BD | RUBBER IMPREGNATED BRAIDED COPPER WIRE |
| BE | RUBBER IMPREGNATED BRAIDED CORROSION RESISTANT STEEL WIRE |
| AZ | RUBBER IMPREGNATED BRAIDED COTTON CORD |
| DG | RUBBER IMPREGNATED BRAIDED FABRIC |
| BA | RUBBER IMPREGNATED BRAIDED POLYAMIDE CORD |
| BB | RUBBER IMPREGNATED BRAIDED RAYON CORD |
| BF | RUBBER IMPREGNATED BRAIDED STEEL WIRE |
| BG | RUBBER IMPREGNATED COTTON FABRIC |
| DJ | RUBBER IMPREGNATED FABRIC |
| ST | RUBBER IMPREGNATED HELIX WIRE COIL |
| BH | RUBBER IMPREGNATED POLYAMIDE FABRIC |
| BJ | RUBBER IMPREGNATED RAYON FABRIC |
| JB | RUBBER IMPREGNATED WIRE |
| FC | RUBBER IMPREGNATED WOVEN COTTON CORD |
| DF | RUBBER IMPREGNATED WOVEN FABRIC |
| SR | RUBBER, GRADE 149FS75, B F GOODRICH |
| BK | SHEET RUBBER |
| BM | SPIRAL INTERLOCKED COPPER |
| BR | SPIRAL INTERLOCKED CORROSION RESISTANT STEEL |
| BX | SPIRAL INTERLOCKED CORROSION RESISTANT STEEL WITH PACKING |
| BN | SPIRAL INTERLOCKED COTTON |
| BQ | SPIRAL INTERLOCKED RAYON |
| BS | SPIRAL INTERLOCKED STEEL |
| BY | SPIRAL INTERLOCKED STEEL WITH PACKING |
| CC | SPIRALLY LAID ALUMINUM ALLOY WIRE |
| EP | SPIRALLY LAID BRASS WIRE |
| CD | SPIRALLY LAID COPPER WIRE |
| DZ | SPIRALLY LAID CORD STRANDS |
| CE | SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| BZ | SPIRALLY LAID COTTON CORD |
| CA | SPIRALLY LAID POLYAMIDE CORD |
| CB | SPIRALLY LAID RAYON CORD |
| CF | SPIRALLY LAID STEEL WIRE |
| CK | SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SM | SPIRALLY WRAPPED COTTON DUCK |
| SN | SPIRALLY WRAPPED COTTON DUCK, RUBBER IMPREGNATED |
| CG | SPIRALLY WRAPPED COTTON FABRIC |
| SP | SPIRALLY WRAPPED DUCK |
| SQ | SPIRALLY WRAPPED DUCK, RUBBER IMPREGNATED |
| EY | SPIRALLY WRAPPED FABRIC |
| EU | SPIRALLY WRAPPED FIBER TAPE |
| DV | SPIRALLY WRAPPED GLASS FIBER |
| KR | SPIRALLY WRAPPED POLYAMIDE FABRIC |
| CH | SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE FABRIC |
| DS | SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER |
| KS | SPIRALLY WRAPPED RAYON FABRIC |
| CJ | SPIRALLY WRAPPED RUBBER FABRIC |
| FV | SPIRALLY WRAPPED RUBBER TAPE WITH FABRIC BACKING |
| CL | SPIRALLY WRAPPED STEEL FABRIC |
| CW | WOVEN COTTON CORD |
| KT | WOVEN COTTON WITH INTERWOVEN STEEL WIRE |
| ED | WOVEN FABRIC |
| CY | WOVEN POLYAMIDE CORD |
| CX | WOVEN POLYESTER FIBER CORD |
| CZ | WOVEN RAYON CORD |
| DU | WRAPPED GLASS FABRIC |
| DC | WRAPPED RUBBER, CHLOROPRENE |
| EJ | WRAPPED RUBBER, COMPOSITION |
| DY | WRAPPED RUBBER, NATURAL |
| DK | WRAPPED RUBBER, SYNTHETIC |
CRXXJMEASURING METHOD AND LENGTH
THE MEANS USED AND THE MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRXXJAAEX2.0*;CRXXJAAEX2.0$$JAAEX2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AN68) | Reply |
| EX | EXCLUDING END FITTINGS |
| XW | EXTENDED WORKING |
| RL | OVERALL |
| RN | RANDOM |
| WK | WORKING |
ACKH*JMINIMUM INSIDE BENDING RADIUS
THE MINIMUM INSIDE BENDING RADIUS FORMED WITHOUT STRESSING OR DEFORMATION OF A FLEXIBLE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACKHJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) A1 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKV and AARX)
IF STYLE/REPLY CODE(s) A2 OR A4 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADJT and ADJV and ADJU and ADJW)
IF STYLE/REPLY CODE(s) A3 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADJV and ADJT)
IF STYLE/REPLY CODE(s) A7 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADJT and AAGT)
AAGRLCROSS-SECTIONAL SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE CROSS-SECTIONAL SHAPE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAGRLA2)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAN1013 | A1 | ROUND |
| AAN1014 | A2 | OVAL |
| AAN1015 | A3 | SQUARE |
| AAN1016 | A4 | RECTANGULAR |
| AAN1017 | A7 | FLAT |
AAGT*JWALL THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF THE WALL,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAGTJAA2.0*;AAGTJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKG*JBOLT CIRCLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A BOLT CIRCLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKG3AEUJAB2.0*;ABKG3AEUJAB2.0$JAB2.0*;ABKG3AEUJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKU*JFLANGE THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF A FLANGE,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKU3AEUJAB2.0*;ABKU3AEUJAB2.0$JAB2.0*;ABKU3AEUJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AARX*JINSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AARXJAB2.0*;AARXJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKV*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKVJAA2.0*;ABKVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJT*JINSIDE WIDTH
AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJTJAA2.0*;ADJTJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJU*JINSIDE LENGTH
A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJUJAA2.0*;ADJUJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJV*JOUTSIDE WIDTH
AN OUTSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJVJAC2.0*;ADJVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJW*JOUTSIDE LENGTH
A MEASUREMENT OF THE LONGEST OUTSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJWJAB2.0*;ADJWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CRWL*DINSIDE SURFACE CONDITION
THE CONDITION OF THE ITEM WITH RESPECT TO THE TEXTURE OF THE INNER SURFACE.
Enter the applicable reply code from the table below
(CRWLDRG)
| Table 1 |
| Reply Code (AN72) | Reply |
| CV | CONVOLUTED |
| RG | ROUGH |
| SM | SMOOTH |
ADJL*LINNER CONVEYING TUBE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE INNER CONVEYING TUBE.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ADJLLB13*;ADJLLB10$LB4*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAN1001 | B1 | INTERLOCKED UNPACKED |
| AAN1009 | B10 | ANNULAR CLOSE-PITCH CORRUGATED |
| AAN1010 | B11 | HELICAL OPEN-PITCH CORRUGATED |
| AAN1011 | B12 | HELICAL CLOSE-PITCH CORRUGATED |
| AAN1012 | B13 | WELDED CORRUGATED |
| DR00043 | B14 | PLAIN |
| AAN1002 | B2 | INTERLOCKED PACKED |
| AAN1003 | B3 | OVERLAPPED SQUARE LOCKED UNPACKED |
| AAN1004 | B4 | OVERLAPPED SQUARE LOCKED PACKED |
| AAN1005 | B5 | OVERLAPPED DOUBLE-GROOVE UNPACKED |
| AAN1006 | B6 | OVERLAPPED DOUBLE-GROOVE PACKED |
| AAN1007 | B8 | OVERLAPPED HIGH RIDGE PACKED |
| AAN1008 | B9 | ANNULAR OPEN-PITCH CORRUGATED |
AKXL*HEND FITTING COMPONENT AND MATERIAL
THE NAME OF THE FITTING AND/OR COMPONENT AND THE ELEMENT, COMPOUND, OR MIXTURE OF WHICH IT IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below.
(AKXL3AEXHARCU00742.0*;AKXL3AEXHARCU00742.0$HARCU00742.0*;AKXL3AEXHARCU00742.0$$HARCU00742.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC42) | Reply |
| AY | ADAPTER |
| AA | BODY |
| AZ | COLLAR |
| AT | COMPLETE FITTING |
| AC | EXPANSION RING |
| AD | FEMALE HOSE BOWL |
| AV | FEMALE STRAIGHT SWIVEL WITH COLLAR |
| AE | FEMALE THREADED EXPANDER |
| AG | FLANGE |
| AW | INSERT |
| AK | NIPPLE |
| AL | NUT |
| BF | PIN |
| AM | SHELL |
| AP | SOCKET |
| AR | SWIVEL NUT |
| AS | TUBE |
| BA | UNION |
| Table 3 |
| Reply Code (MA01) | Reply |
| ALB000 | ALUMINUM ALLOY |
| AL6061 | ALUMINUM ALLOY 6061 |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0074 | COPPER ALLOY 230 |
| CU0076 | COPPER ALLOY 240 |
| CU0079 | COPPER ALLOY 260 |
| CU0304 | COPPER ALLOY 262 |
| CU0080 | COPPER ALLOY 268 |
| CU0081 | COPPER ALLOY 270 |
| CU0272 | COPPER ALLOY 272 |
| CU0274 | COPPER ALLOY 274 |
| CU0302 | COPPER ALLOY 280 |
| CU0330 | COPPER ALLOY 330 |
| CU0305 | COPPER ALLOY 331 |
| CU0332 | COPPER ALLOY 332 |
| CU0335 | COPPER ALLOY 335 |
| CU0340 | COPPER ALLOY 340 |
| CU0088 | COPPER ALLOY 342 |
| CU0306 | COPPER ALLOY 344 |
| CU0307 | COPPER ALLOY 345 |
| CU0308 | COPPER ALLOY 347 |
| CU0309 | COPPER ALLOY 348 |
| CU0310 | COPPER ALLOY 350 |
| CU0089 | COPPER ALLOY 353 |
| CU0090 | COPPER ALLOY 356 |
| CU0091 | COPPER ALLOY 360 |
| CU0370 | COPPER ALLOY 370 |
| CU0092 | COPPER ALLOY 377 |
| CU0098 | COPPER ALLOY 462 |
| CU0099 | COPPER ALLOY 464 |
| CU0465 | COPPER ALLOY 465 |
| CU0466 | COPPER ALLOY 466 |
| CU0467 | COPPER ALLOY 467 |
| CU0100 | COPPER ALLOY 482 |
| CU0101 | COPPER ALLOY 485 |
| CU0104 | COPPER ALLOY 511 |
| CCA000 | COTTON |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| NL0008 | NICKEL ALLOY 400 |
| NL0011 | NICKEL ALLOY D |
| PCA000 | PLASTIC |
| PCB000 | PLASTIC ACETAL |
| PCAX00 | PLASTIC ACRYLONITRILE |
| PCAAD0 | PLASTIC FLUOROCARBON |
| PCM000 | PLASTIC PHENOL-FORMALDEHYDE |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCR000 | PLASTIC POLYCARBONATE |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| PCZ000 | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE |
| PCAA00 | PLASTIC POLYHEXAMETHYLENE SEBACAMIDE |
| PCAD00 | PLASTIC POLYSTYRENE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCCD00 | PLASTIC POLYVINYL |
| PCBM00 | PLASTIC POLYVINYL ACETATE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCAW00 | PLASTIC TETRAFLUOROETHYLENE |
| PCAL00 | PLASTIC UREA |
| PCAP00 | PLASTIC VINYL |
| RCE000 | RUBBER |
| RC0024 | RUBBER BUTADIENE CLASS BR |
| RC0019 | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| RC0022 | RUBBER BUTADIENE-STYRENE CLASS SBR |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RC0009 | RUBBER ETHYLENE-PROPYLENE CLASS EPM |
| RC0013 | RUBBER FLUOROCARBON CLASS FPM |
| RC0017 | RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR |
| RCA000 | RUBBER NATURAL |
| RC0001 | RUBBER POLYACRYLATE CLASS ACM |
| RC0020 | RUBBER POLYISOPRENE NATURAL CLASS NR |
| RC0023 | RUBBER POLYSULFIDE CLASS T |
| RCC000 | RUBBER SILICONE |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| STA000 | STEEL |
| ST1008 | STEEL COMP 1008 |
| ST1009 | STEEL COMP 1009 |
| ST1010 | STEEL COMP 1010 |
| ST1012 | STEEL COMP 1012 |
| ST1015 | STEEL COMP 1015 |
| ST1018 | STEEL COMP 1018 |
| ST1020 | STEEL COMP 1020 |
| ST0202 | STEEL COMP 202 |
| ST0302 | STEEL COMP 302 |
| ST0303 | STEEL COMP 303 |
| ST0304 | STEEL COMP 304 |
| ST0305 | STEEL COMP 305 |
| ST0316 | STEEL COMP 316 |
| ST0082 | STEEL COMP 316L |
| ST0321 | STEEL COMP 321 |
| ST0347 | STEEL COMP 347 |
| ST0348 | STEEL COMP 348 |
| ST0410 | STEEL COMP 410 |
| ST0630 | STEEL COMP 630 |
| ST0977 | STEEL COMP Z6CNNB18-10 |
| STB000 | STEEL CORROSION RESISTING |
AKXM*HFITTING COMPONENT AND SURFACE TREATMENT
THE NAME OF THE FITTING AND/OR COMPONENT AND THE PLATING, DIP AND/OR COATINGTHAT CANNOT BE WIPED OFF. PLATING AND/OR COATING IS ANY CHEMICAL AND/OR METALLIC ADDITIVE, ELECTROCHEMICAL OR MILD MECHANICAL PROCESS WHICH PROTECTS THE SURFACE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below.
(AKXM3AEXHACXXB0002.0*;AKXM3AEXHACXXB0002.0$HACXXB0002.0*;AKXM3AEXHACXXB0002.0$$HACXXB0002.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC42) | Reply |
| AY | ADAPTER |
| AA | BODY |
| AZ | COLLAR |
| AT | COMPLETE FITTING |
| AC | EXPANSION RING |
| AD | FEMALE HOSE BOWL |
| AV | FEMALE STRAIGHT SWIVEL WITH COLLAR |
| AE | FEMALE THREADED EXPANDER |
| AG | FLANGE |
| AW | INSERT |
| AK | NIPPLE |
| AL | NUT |
| BF | PIN |
| AM | SHELL |
| AP | SOCKET |
| AR | SWIVEL NUT |
| AS | TUBE |
| BA | UNION |
| Table 3 |
| Reply Code (SF01) | Reply |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CMA000 | CHROMATE |
| CRA000 | CHROMIUM |
| CUB000 | COPPER ALLOY |
| DCA000 | DICHROMATE |
| DCC000 | DICHROMATE ZINC |
| ENA000 | ENAMEL |
| LQA000 | LACQUER |
| NLA000 | NICKEL |
| XXB000 | OXIDE |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PHD000 | PHOSPHATE ZINC |
| PCJ000 | PLASTIC POLYSTYRENE |
| RC0019 | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| AGA000 | SILVER |
| SNA000 | TIN |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACU | FLANGE |
| 3ADI | NUT |
| 3ADP | RETAINER |
| 3ADW | TUBE |
| 3AEE | OVERALL |
| 3AUW | OUTSIDE |
| 3AVU | SLEEVE |
| 3BAE | SOCKET |
| 3BDP | PLUG |
| 3DPW | ELBOW |
| 3DPY | NIPPLE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ADI | NUT |
| 3ADW | TUBE |
| 3AEE | OVERALL |
| 3BAE | SOCKET |
| 3DPW | ELBOW |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
IF STYLE/REPLY CODE(s) AA, AD, AE, AT OR AV WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER STYLE/REPLY CODES(s) C1, C11, C14, C15, C16, C18 OR C19 FOR MRC (AHNC)
IF STYLE/REPLY CODE(s) AC, AG, AR OR AW WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER STYLE/REPLY CODES(s) D1, D12, D13, D14, D15, D16 OR D17 FOR MRC (AHNC)
IF STYLE/REPLY CODE(s) RH, RJ, RK OR RL WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER STYLE/REPLY CODES(s) E1, E2, E4, E5 OR E6 FOR MRC (AHNC)
IF STYLE/REPLY CODE(s) AK, AL, AM OR BF WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER STYLE/REPLY CODES(s) G1 OR G12 FOR MRC (AHNC)
IF STYLE/REPLY CODE(s) AY, AZ, BA, RF OR RG WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER STYLE/REPLY CODES(s) H1 FOR MRC (AHNC)
IF STYLE/REPLY CODE(s) AS WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER STYLE/REPLY CODES(s) L1, L2, L3, L4, L5, L6, L7 OR L8 FOR MRC (AHNC)
IF STYLE/REPLY CODE(s) WT WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER STYLE/REPLY CODES(s) N1, N2, N3 OR N4 FOR MRC (AHNC)
IF STYLE/REPLY CODE(s) WV WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER STYLE/REPLY CODES(s) P1 OR P2 FOR MRC (AHNC)
IF STYLE/REPLY CODE(s) AA, AC, AE, AG, AP, AR, AT, AW, RH, RJ, RK OR RL WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (THSD and CQJX and AAJF)
IF STYLE/REPLY CODE(s) AE, AG, AK, AL, AM, AV, AW, AY, AZ, RE, RF, RJ, RK, RL OR WV WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AAAR)
IF STYLE/REPLY CODE(s) AY, AZ, BA, RF OR RG WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (ADLP)
IF STYLE/REPLY CODE(s) AP, AR, AS, AT, AV, AW, AY, AZ, BA, RF, RG OR WV WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (CWDW)
IF STYLE/REPLY CODE(s) AA, AC, AD, AK, AL, AM, AT, AV, AW, AY, AZ, RH, RJ, RK, WT OR WV WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (CWFD)
AWLSDCONNECTION TYPE
INDICATES THE TYPE OF CONNECTION/S/.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AWLS3DRJDWT*;AWLS3DRJDWT$DRJ*;AWLS3DRJDWT$$DRJ*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABF | CENTER |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3DRE | INLET |
| 3DRJ | ALL ENDS BULKHEAD |
| 3DRN | SINGLE INLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB76) | Reply |
| RG | AIR CHUCK QUICK DISCONNECT |
| AZ | EXTERNAL QUICK DISCONNECT |
| BF | FLANGE |
| BA | GLAD HAND QUICK DISCONNECT |
| AY | INTERNAL QUICK DISCONNECT |
| AM | PLAIN FACE FLANGE |
| AL | RAISED FACE FLANGE |
| AK | RECESSED FLANGE |
| AW | THREADED EXTERNAL BOSS |
| AR | THREADED EXTERNAL HOSE |
| AG | THREADED EXTERNAL PIPE |
| AC | THREADED EXTERNAL TUBE |
| RL | THREADED INTERNAL AND EXTERNAL PIPE |
| RH | THREADED INTERNAL AND EXTERNAL TUBE |
| AV | THREADED INTERNAL BOSS |
| AT | THREADED INTERNAL GAS CYLINDER |
| AP | THREADED INTERNAL HOSE |
| AE | THREADED INTERNAL PIPE |
| RK | THREADED INTERNAL PIPE AND EXTERNAL TUBE |
| AA | THREADED INTERNAL TUBE |
| RJ | THREADED INTERNAL TUBE AND EXTERNAL PIPE |
| RF | UNIVERSAL QUICK DISCONNECT |
| AS | UNTHREADED EXTERNAL HOSE |
| AD | UNTHREADED EXTERNAL TUBE |
| WV | UNTHREADED FLUID PASSAGE BOLT |
| RE | UNTHREADED PIPE |
| WT | UNTHREADED TUBE W/FORMED END |
IF STYLE/REPLY CODE(s) G4, G5, G6, G7 OR G8 WERE ENTERED FOR MRC AHNC, YOU MUST ANSWER MRC (AJEE and AJED)
IF STYLE/REPLY CODE(s) G9 OR G11 WERE ENTERED FOR MRC AHNC, YOU MUST ANSWER MRC (ABMH and ABMD)
IF STYLE/REPLY CODE(s) P1 OR P2 WERE ENTERED FOR MRC AHNC, YOU MUST ANSWER MRC (AHNX and ABKU)
IF STYLE/REPLY CODE(s) C1, C2, C3, C4, C8, D1, D3, D4, E4, C10, C14, C15, C19, C21 OR D13 WERE ENTERED FOR MRC AHNC, YOU MUST ANSWER MRC (CQRB) or (CWBZ)
IF STYLE/REPLY CODE(s) G1, G4, G5, G6, G9, G11 OR G12 WERE ENTERED FOR MRC AHNC, YOU MUST ANSWER MRC (AKUT)
AHNC*LCONNECTION STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE CONNECTION.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(AHNC3AEELC16*;AHNC3AEELC16$LG3*;AHNC3AEELC16$$LG3*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAN1018 | C1 | SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE |
| AAN1025 | C10 | FLARE |
| AAN1026 | C11 | SWIVEL NUT, COMPRESSION |
| AAN1027 | C12 | SWIVEL NUT, FLARELESS |
| AAN1028 | C13 | SWIVEL NUT, GAS |
| AAN1029 | C14 | INVERTED FLARE |
| AAN1030 | C15 | DOUBLE COMPRESSION |
| AAN1031 | C16 | PLAIN OPTIONAL END |
| AAN1032 | C18 | GASKET SEAL |
| AAN1033 | C19 | SWIVEL NUT WITH COMPRESSION SLEEVE |
| AAN1019 | C2 | SWIVEL NUT WITH COMPRESSION SLEEVE |
| AAN1034 | C20 | NUT ASSEMBLY WITH GASKET |
| AAN1035 | C21 | NUT ASSEMBLY WITH INVERTED FLARE AND GASKET |
| AAN1020 | C3 | SWIVEL NUT FLARE |
| AAN1021 | C4 | SWIVEL NUT, INVERTED FLARE |
| AAN1022 | C5 | SWIVEL NUT, GASKET SEAL |
| AAN1023 | C8 | HIGH PRESSURE GASKET SEAL |
| AAN1024 | C9 | GASKET SEAL / OPTIONAL END |
| AAN1036 | D1 | FLARED |
| AAN1045 | D10 | SWIVEL NUT, FLARED |
| AAN1046 | D12 | SWIVEL, PLAIN |
| AAN1047 | D13 | SWIVEL NUT, INVERTED FLARE |
| AAN1048 | D14 | DOUBLE THREADED SECTION, BOSS FITTING GASKET WITH LOCKOUT SEALING |
| AAN1049 | D15 | FLARED |
| AAN1050 | D16 | SWIVEL, EXTERNAL SEAT FOR GASKET SEAL |
| AAN1051 | D17 | GRIPPING |
| AAN1037 | D2 | COMPRESSION |
| AAN1038 | D3 | INVERTED FLARE |
| AAN1039 | D4 | FLARELESS |
| AAN1040 | D5 | PLAIN |
| AAN1041 | D6 | SWIVEL NUT DOUBLE COMPRESSION |
| AAN1042 | D7 | EXTERNAL SEAT FOR GASKET SEAL (BOSS) |
| AAN1043 | D8 | GASKET SEAL COMPRESSION |
| AAN1044 | D9 | GASKET SEAL |
| AAN1052 | E1 | THREADED |
| AAN1053 | E2 | INVERTED FLARE |
| AAN1054 | E4 | INVERTED FLARE |
| AAN1055 | E5 | COMPRESSION |
| AAN1056 | E6 | GASKET SEAL |
| AAN1059 | G1 | PLAIN |
| AAN1067 | G11 | RECESSED W/GASKET GROOVE |
| AAN1068 | G12 | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) |
| AAN1060 | G2 | PLAIN SWIVEL |
| AAN1061 | G3 | PLAIN SWIVEL W/ GASKET GROOVE |
| AAN1069 | G4 | RAISED |
| AAN1062 | G5 | RAISED |
| AAN1063 | G6 | RAISED |
| AAN1064 | G7 | RAISED SWIVEL |
| AAN1065 | G8 | RAISED SWIVEL W/ GASKET GROOVE |
| AAN1066 | G9 | RECESSED |
| AAN1070 | H1 | UNIVERSAL |
| AAN1079 | H10 | CAM (EXTERNAL) |
| AAN1071 | H2 | BALL FOOT AIR CHUCK |
| AAN1072 | H3 | CAM OR LEVER (INTERNAL) |
| AAN1073 | H4 | CAM OR LEVER (EXTERNAL) |
| AAN1074 | H5 | PUSH (INTERNAL) |
| AAN1075 | H6 | PUSH (EXTERNAL) |
| AAN1076 | H7 | GLADHAND |
| AAN1077 | H8 | EXTERNAL PLUNGER TYPE |
| AAN1078 | H9 | INTERNAL PLUNGER TYPE |
| AAN1090 | L1 | BEADED |
| AAN1091 | L2 | BARBED OR SERRATED END |
| AAN1092 | L3 | KNURLED |
| AAN1093 | L4 | SPIRALED |
| AAN1094 | L5 | GROOVED |
| AAN1095 | L6 | BEADED |
| AAN1096 | L7 | STRAIGHT |
| AAN1097 | L8 | STRAIGHT BEVELED |
| AAN1104 | N1 | LAVATORY RISER |
| AAN1105 | N2 | CLOSET RISER |
| AAN1106 | N3 | CORRUGATE LAVATORY RISERS (W/ NONMETALLIC NOSEPIECE) |
| AAN1107 | N4 | CORRUGATED CLOSET RISERS (W/ NONMETALLIC NOSEPIECE) |
| AAN1108 | P1 | BRAKE LINE FITTING |
| AAN1109 | P2 | FLUID CONNECTION |
AJED*JRAISED FACE HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP SURFACE OF A RAISED FACE,IN DISTINCTION FROM DEPTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJED3AEUJAB2.0*;AJED3AEUJAB2.0$JAB2.0*;AJED3AEUJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJEE*JRAISED FACE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A RAISED FACE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJEE3AETJAB2.0*;AJEE3AETJAB2.0$JAB2.0*;AJEE3AETJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMD*JRECESS DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE RECESS,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMD3AETJAB2.0*;ABMD3AETJAB2.0$JAB2.0*;ABMD3AETJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMH*JRECESS DEPTH
A MEASUREMENT BETWEEN SPECIFIED POINTS ON THE RECESS,IN DISTINCTION FROM HEIGHT.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMH3AETJAA2.0*;ABMH3AETJAA2.0$JAA2.0*;ABMH3AETJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CQRB*JSEAT ANGLE
THE ANGLE OF THE END SURFACE UPON WHICH THE MATED SURFACE SEATS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQRB3AEXJR2.0*;CQRB3AEXJR2.0$JR2.0*;CQRB3AEXJR2.0$$JR2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP38) | Reply |
| D | DEGREES |
| R | RADIANS |
AKUT*DEND FLANGE CONSTRUCTION
THE DESIGN USED IN CONSTRUCTING THE END PORTION OF THE FLANGE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AKUT3AETDSP*;AKUT3AETDSP$DSL*;AKUT3AETDSP$$DSL*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3DRE | INLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC40) | Reply |
| SL | SOLID |
| SP | SPLIT |
CWBZ*JSEAT NOMINAL RADIUS
THE NOMINAL RADIUS OF THE END SURFACE UPON WHICH THE MATED SURFACE SEATS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWBZ3AEXJA2.0*;CWBZ3AEXJA2.0$JA2.0*;CWBZ3AEXJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CTCJ*LFLANGE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE FLANGE.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(CTCJ3AEXLK8*;CTCJ3AEXLK8$LK7*;CTCJ3AEXLK8$$LK7*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3DRJ | ALL ENDS BULKHEAD |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAN1082 | K1 | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) |
| AAN1083 | K2 | HEXAGON |
| AAN1084 | K3 | OCTAGON |
| AAN1085 | K4 | OVAL |
| AAN1086 | K5 | RECTANGULAR (INCLUDES SQUARE) |
| DR11443 | K6 | ROUND W / BOLT HOLES |
| AAN1088 | K7 | TRIANGULAR |
| AAN1089 | K8 | ROUND W/ OUT BOLT HOLES |
AHNX*JBOLT HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BOLT HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHNX3AEUJAA2.0*;AHNX3AEUJAA2.0$JAA2.0*;AHNX3AEUJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3DRE | INLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEPR*JFLANGE OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE FLANGE,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEPR3AEUJAC2.0*;AEPR3AEUJAC2.0$JAC2.0*;AEPR3AEUJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFQN*JFLANGE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A FLANGE,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFQN3AEUJAC2.0*;AFQN3AEUJAC2.0$JAC2.0*;AFQN3AEUJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGFF*JFLANGE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A FLANGE,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGFF3AETJAB2.0*;AGFF3AETJAB2.0$JAB2.0*;AGFF3AETJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUZ*JCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
A MEASUREMENT OF THE CENTER TO CENTER DISTANCE BETWEEN THE BOLT HOLES ALONG THE LENGTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUZ3AETJAA2.0*;ADUZ3AETJAA2.0$JAA2.0*;ADUZ3AETJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUY*JCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
A MEASUREMENT OF THE CENTER TO CENTER DISTANCE BETWEEN THE BOLT HOLES ALONG THE WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUY3AEUJAC2.0*;ADUY3AEUJAC2.0$JAC2.0*;ADUY3AEUJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKUU*DEND CONNECTION DESIGN
THE PHYSICAL CONFIGURATION OF THE OUTSIDE OF THE END CONNECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AKUU3AEEDST*;AKUU3AEEDST$DEL*;AKUU3AEEDST$$DEL*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC41) | Reply |
| EL | ELBOW |
| ST | STRAIGHT |
CRFY*JFLOW ANGLE
THE ANGLE THAT THE FLOW IS TURNED FROM THE STRAIGHT FLOW.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRFY3AEUJD2.0*;CRFY3AEUJD2.0$JD2.0*;CRFY3AEUJD2.0$$JD2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3DRD | CENTER BULKHEAD |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP38) | Reply |
| D | DEGREES |
| R | RADIANS |
ADKX*BANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG
THE AMOUNT OF ROTATION IN A COUNTERCLOCKWISE DIRECTION NEEDED TO BRING THE CENTERLINE OF ONE RIGID ELBOW INTO COINCIDENCE WITH THE CENTERLINE OF THE RIGID ELBOW ON THE OPPOSITE END,EXPRESSED IN DEGREES.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ADKXB2.0)
IF STYLE/REPLY CODE(s) FB OR ZP WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CMLP)
IF STYLE/REPLY CODE(s) FB OR ZP WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (AAJD and AAJE)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(THSD3AEXDJL*;THSD3AEXDJL$DNC*;THSD3AEXDJL$$DNC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| AC | ACME C |
| AG | ACME G |
| AN | ANPT |
| BF | BRITISH STANDARD FINE (BSF) |
| BW | BRITISH STANDARD WHITWORTH (BSW) |
| ZP | BSP. L |
| FB | BSP.F |
| PL | BSP.PL |
| BS | BSP.TR EXT |
| BR | BSP.TR INT |
| SM | ISO M |
| SS | ISO S |
| JL | JIC |
| NG | NGO |
| NH | NH |
| NZ | NH-SPCL |
| SP | NPS |
| SC | NPSC |
| SF | NPSF |
| SH | NPSH |
| PS | NPSI |
| SL | NPSL |
| PM | NPSM |
| NP | NPT |
| NT | NPTF |
| PT | PTF-SAE SHORT |
| PP | PTF-SPL |
| PE | PTF-SPL EXTRA SHORT |
| RD | ROUND |
| MT | SUBMARINE THD |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNIFIED NATIONAL FINE (UNJ) |
| JF | UNIFIED NATIONAL JOINT FINE (UNJF) |
| JC | UNJC |
| JE | UNJEF |
| JS | UNJS |
| NS | UNS |
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJX3AEEJA2.0*;CQJX3AEEJA2.0$JA2.0*;CQJX3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3DRE | INLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(CMLP3AEVAP0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(AAJD3AETAG6)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AAJE*JTHREAD PITCH DIAMETERS
THE MINIMUM AND MAXIMUM PITCH DIAMETER LIMITS OF A STRAIGHT SCREW THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AAJE3AEEJAM32.0/P50.0*;AAJE3AEEJAM32.0/P50.0$$JA*;AAJE3AEEJAM32.0/P50.0$JAM32.0/P50.0*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CQQR*BTHREAD PITCH IN MILLIMETERS
A MEASUREMENT OF DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(CQQR3AEXB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CTTC*JTHREAD TOLERANCE CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING ESTABLISHED PITCH AND CREST DIAMETER TOLERANCE POSITION AND GRADE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a alpha-numeric reply with a minimum of one character.
(CTTC3AEEJNTE2.0*;CTTC3AEEJNTE2.0$JNTE2.0*;CTTC3AEEJNTE2.0$$JNTE2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN73) | Reply |
| EXT | EXTERNAL |
| NTE | INTERNAL |
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AAJF3AEEDAAL*;AAJF3AEEDAAL$DAAG*;AAJF3AEEDAAL$$DAAG*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
AAAR*JNOMINAL PIPE SIZE ACCOMMODATED
A MEASUREMENT OF THE PIPE SIZE THE ITEM WILL ACCOMMODATE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAAR3ABFJA2.0*;AAAR3ABFJA2.0$JA2.0*;AAAR3ABFJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABF | CENTER |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3DRD | CENTER BULKHEAD |
| 3DRE | INLET |
| 3DRJ | ALL ENDS BULKHEAD |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWFD*JNOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE ACCOMMODATED TUBE,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWFD3AEUJA2.0*;CWFD3AEUJA2.0$JA2.0*;CWFD3AEUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3DRJ | ALL ENDS BULKHEAD |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
ADLP*JQUICK DISCONNECT NOMINAL SIZE
THE INDUSTRIAL DESIGNATION OR TERM FOR THE SIZE OF THE QUICK DISCONNECT INTERNAL OR EXTERNAL END.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADLP3AEUJA2.0*;ADLP3AEUJA2.0$JA2.0*;ADLP3AEUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3DRJ | ALL ENDS BULKHEAD |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWDW*JNOMINAL INSIDE DIAMETER HOSE ACCOMMODATED
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE ACCOMMODATED HOSE,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWDW3AETJA2.0*;CWDW3AETJA2.0$JA2.0*;CWDW3AETJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CXBP*JFIRST END DISTANCE BETWEEN LUGS
THE DISTANCE BETWEEN THE LUGS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CXBPJAC2.0*;CXBPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDFNY*;CBBLDABR$$DASH*)
| Table 1 |
| Reply Code (AN47) | Reply |
| AAK | ELECTROSTATIC DISCHARGE CAPABILITY |
| FVT | IDENTICAL ENDS |
| ABN | INTERNAL SUPPORT |
| ABP | NONSKIVE |
| ABQ | NUTS DRILLED FOR LOCKWIRE |
| ABR | PERFORATED OUTER COVER |
| ABS | REUSABLE END FITTINGS |
| FNY | ROHS DIRECTIVE COMPLIANCE |
| ABT | SELF-SEALING |
| ASH | SPIRAL SPRING COILED |
| FVU | SWIVEL END |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
MARK*GSPECIAL MARKINGS
MARKINGS INCLUDED ON AN ITEM FOR THE PURPOSE OF OFFERING INSTRUCTIONS OR WARNINGS OR TO INDICATE THE PURPOSE, FUNCTION, OR APPLICATION OF THE ITEM. EXCLUDES MANUFACTURER'S PART NUMBERS, SYMBOLS, OR THE LIKE.
Enter clear text.
(MARKGCLEARTEXT)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ012*;HZRDDHAZ011$$DHAZ042*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ042 | ASBESTOS |
| HAZ011 | CHROMIUM |
| HAZ012 | COPPER |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
AECS*ABOLT HOLE QUANTITY
THE NUMBER OF BOLT HOLES PROVIDED ON THE ITEM.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(AECS3AEEA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
TEXT*GGENERAL CHARACTERISTICS ITEM DESCRIPTION
A RECORDING OF THE PHYSICAL,FUNCTIONAL,AND PERFORMANCE CHARACTERISTICS FOR AN ITEM OF SUPPLY.
Enter clear text.
(TEXTGCLEARTEXT)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ASDB*JWIDTH ACROSS FLATS
THE SHORTEST STRAIGHT LINE BETWEEN FLATS,PERPENDICULAR TO THE HEIGHT.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ASDB3AEXJAB2.0*;ASDB3AEXJAB2.0$JAB2.0*;ASDB3AEXJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3AIC | FOURTH END |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information