A steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
expandFSC Information
4730Hose, Pipe, Tube, Lubrication, and Railing Fittings
expandColloquial Information
No Colloquials assigned to this Approve Item Name at this time
expandChange List
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 1F deleted from MRC MATT.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1C deleted from MRC SFTT.
ISAC Reply 1D deleted from MRC SFTT.
ISAC Reply 1E deleted from MRC SFTT.
ISAC Reply 1F deleted from MRC SFTT.
ISAC Reply 3AEE added to MRC THSD.
ISAC Reply 3AVP added to MRC THSD.
ISAC Reply 3HOU added to MRC THSD.
ISAC Reply 1A deleted from MRC THSD.
ISAC Reply 1B deleted from MRC THSD.
ISAC Reply 1H deleted from MRC THSD.
ISAC Reply 3AEE added to MRC CQJX.
ISAC Reply 3AVQ added to MRC CQJX.
ISAC Reply 3HOU added to MRC CQJX.
ISAC Reply 1A deleted from MRC CQJX.
ISAC Reply 1B deleted from MRC CQJX.
ISAC Reply 1H deleted from MRC CQJX.
ISAC Reply 3AEE added to MRC TPMM.
ISAC Reply 3AVQ added to MRC TPMM.
ISAC Reply 3HOU added to MRC TPMM.
ISAC Reply 1A deleted from MRC TPMM.
ISAC Reply 1B deleted from MRC TPMM.
ISAC Reply 1H deleted from MRC TPMM.
MRC MDCL has been deleted
MRC STDC has been deleted
MRC CMLP has been deleted
MRC AAJD has been deleted
MRC AJBS has been deleted
MRC AAJE has been deleted
MRC AAJF has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED17508*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDCU0115*;MATT3AEEDCU0115$DST0068*;MATT3AEEDCU0115$$DST0068*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (MA01)Reply
ALA000ALUMINUM
ALB000ALUMINUM ALLOY
AL1100ALUMINUM ALLOY 1100
AL2011ALUMINUM ALLOY 2011
AL2014ALUMINUM ALLOY 2014
AL2017ALUMINUM ALLOY 2017
AL2024ALUMINUM ALLOY 2024
AL3003ALUMINUM ALLOY 3003
AL0355ALUMINUM ALLOY 355
AL0356ALUMINUM ALLOY 356
AL0031ALUMINUM ALLOY 380.0
AL5083ALUMINUM ALLOY 5083
AL5086ALUMINUM ALLOY 5086
AL6061ALUMINUM ALLOY 6061
AL6062ALUMINUM ALLOY 6062
AL6151ALUMINUM ALLOY 6151
AL7075ALUMINUM ALLOY 7075
BRA000BRASS
BND000BRONZE
CLD000CERAMIC
CRA000CHROMIUM
CTA000COBALT
CUA000COPPER
CUB000COPPER ALLOY
CU0060COPPER ALLOY 11
CU0069COPPER ALLOY 172
CU0074COPPER ALLOY 230
CU0079COPPER ALLOY 260
CU0080COPPER ALLOY 268
CU0088COPPER ALLOY 342
CU0089COPPER ALLOY 353
CU0091COPPER ALLOY 360
CU0092COPPER ALLOY 377
CU0098COPPER ALLOY 462
CU0099COPPER ALLOY 464
CU0100COPPER ALLOY 482
CU0101COPPER ALLOY 485
CU0103COPPER ALLOY 510
CU0111COPPER ALLOY 606
CU0115COPPER ALLOY 614
CU0122COPPER ALLOY 630
CU0123COPPER ALLOY 637-CANCELED
CU0127COPPER ALLOY 642
CU0670COPPER ALLOY 670
CU0706COPPER ALLOY 706
CU0715COPPER ALLOY 715
CU0172COPPER ALLOY 836
CU0173COPPER ALLOY 838
CU0845COPPER ALLOY 845
CU0178COPPER ALLOY 854
CU0199COPPER ALLOY 913
CU0202COPPER ALLOY 922
CU0001COPPER ALLOY A
CU0009COPPER ALLOY A8
CU0026COPPER ALLOY CA330
CU0027COPPER ALLOY CA360
CU0242COPPER ALLOY CA377
CU0028COPPER ALLOY CA464
CU0033COPPER ALLOY CA865
LBF000DISULFIDE MOLYBDENUM
FEA000IRON
FEB000IRON CAST
FEH000IRON CAST MALLEABLE
MGA000MAGNESIUM
MGB000MAGNESIUM ALLOY
MG0001MAGNESIUM ALLOY AZ31B
MG0006MAGNESIUM ALLOY ZK60A
MNA000MANGANESE
NLA000NICKEL
NLB000NICKEL ALLOY
NL0001NICKEL ALLOY A
NL0002NICKEL ALLOY B
PCA000PLASTIC
PCB000PLASTIC ACETAL
PCAN00PLASTIC CELLULOSE ACETATE
PCCB00PLASTIC NYLON
PCN000PLASTIC PHENOLIC
PCP000PLASTIC POLYAMIDE (NYLON)
PCX000PLASTIC POLYETHYLENE
PCY000PLASTIC POLYETHYLENE TEREPHTHALATE
PCZ000PLASTIC POLYHEXAMETHYLENE ADIPAMIDE
PCAA00PLASTIC POLYHEXAMETHYLENE SEBACAMIDE
PCAC00PLASTIC POLYPROPYLENE
PCAF00PLASTIC POLYTETRAFLUOROETHYLENE
PCAH00PLASTIC POLYURETHANE
PCBM00PLASTIC POLYVINYL ACETATE
PCAJ00PLASTIC POLYVINYL CHLORIDE (PVC)
PCAP00PLASTIC VINYL
RCA000RUBBER NATURAL
RCB000RUBBER SYNTHETIC
AGA000SILVER
STA000STEEL
ST1005STEEL COMP 1005
ST1006STEEL COMP 1006
ST1008STEEL COMP 1008
ST1009STEEL COMP 1009
ST1010STEEL COMP 1010
ST1011STEEL COMP 1011
ST1012STEEL COMP 1012
ST1013STEEL COMP 1013
ST1015STEEL COMP 1015
ST1016STEEL COMP 1016
ST1017STEEL COMP 1017
ST1018STEEL COMP 1018
ST1019STEEL COMP 1019
ST1020STEEL COMP 1020
ST1021STEEL COMP 1021
ST1022STEEL COMP 1022
ST1023STEEL COMP 1023
ST1024STEEL COMP 1024
ST1025STEEL COMP 1025
ST1026STEEL COMP 1026
ST1027STEEL COMP 1027
ST1029STEEL COMP 1029
ST1030STEEL COMP 1030
ST1031STEEL COMP 1031
ST1033STEEL COMP 1033
ST1034STEEL COMP 1034
ST1035STEEL COMP 1035
ST1036STEEL COMP 1036
ST1037STEEL COMP 1037
ST1038STEEL COMP 1038
ST1039STEEL COMP 1039
ST1040STEEL COMP 1040
ST1041STEEL COMP 1041
ST1042STEEL COMP 1042
ST1043STEEL COMP 1043
ST1044STEEL COMP 1044
ST1045STEEL COMP 1045
ST1046STEEL COMP 1046
ST1048STEEL COMP 1048
ST1049STEEL COMP 1049
ST1050STEEL COMP 1050
ST1108STEEL COMP 1108
ST1109STEEL COMP 1109
ST1110STEEL COMP 1110
ST1111STEEL COMP 1111
ST1112STEEL COMP 1112
ST1113STEEL COMP 1113
ST1115STEEL COMP 1115
ST1116STEEL COMP 1116
ST1117STEEL COMP 1117
ST1118STEEL COMP 1118
ST1119STEEL COMP 1119
ST1120STEEL COMP 1120
ST1132STEEL COMP 1132
ST1137STEEL COMP 1137
ST1140STEEL COMP 1140
ST1141STEEL COMP 1141
ST1144STEEL COMP 1144
ST1145STEEL COMP 1145
ST1146STEEL COMP 1146
ST1151STEEL COMP 1151
ST1211STEEL COMP 1211
ST1212STEEL COMP 1212
ST1213STEEL COMP 1213
ST1215STEEL COMP 1215
ST0063STEEL COMP 12L14
ST0064STEEL COMP 12L15
ST1320STEEL COMP 1320
ST1330STEEL COMP 1330
ST0065STEEL COMP 1330H
ST1335STEEL COMP 1335
ST0066STEEL COMP 1335H
ST1340STEEL COMP 1340
ST0067STEEL COMP 1340H
ST1345STEEL COMP 1345
ST0068STEEL COMP 1345H
ST0069STEEL COMP 15-5PH
ST0071STEEL COMP 17-4PH
ST1663STEEL COMP 25CD4
ST0302STEEL COMP 302
ST0303STEEL COMP 303
ST0078STEEL COMP 303S
ST0079STEEL COMP 303SE
ST0304STEEL COMP 304
ST0080STEEL COMP 304L
ST0305STEEL COMP 305
ST0152STEEL COMP 308
ST0309STEEL COMP 309
ST0153STEEL COMP 309S
ST0310STEEL COMP 310
ST3115STEEL COMP 3115
ST3130STEEL COMP 3130
ST3135STEEL COMP 3135
ST0155STEEL COMP 314
ST3140STEEL COMP 3140
ST0081STEEL COMP 3140H
ST0316STEEL COMP 316
ST0082STEEL COMP 316L
ST0317STEEL COMP 317
ST0321STEEL COMP 321
ST0323STEEL COMP 323
ST0324STEEL COMP 324
ST3310STEEL COMP 3310
ST0083STEEL COMP 3310H
ST0347STEEL COMP 347
ST0348STEEL COMP 348
ST0385STEEL COMP 385
ST4023STEEL COMP 4023
ST4027STEEL COMP 4027
ST0084STEEL COMP 4027H
ST4032STEEL COMP 4032
ST4037STEEL COMP 4037
ST0085STEEL COMP 4037H
ST4042STEEL COMP 4042
ST0086STEEL COMP 4042H
ST4047STEEL COMP 4047
ST4120STEEL COMP 4120
ST4130STEEL COMP 4130
ST0090STEEL COMP 4130H
ST4135STEEL COMP 4135
ST0091STEEL COMP 4135H
ST4137STEEL COMP 4137
ST0092STEEL COMP 4137H
ST4140STEEL COMP 4140
ST0093STEEL COMP 4140H
ST4142STEEL COMP 4142
ST4145STEEL COMP 4145
ST4147STEEL COMP 4147
ST4150STEEL COMP 4150
ST0416STEEL COMP 416
ST0098STEEL COMP 416F
ST0099STEEL COMP 416SE
ST0420STEEL COMP 420
ST0430STEEL COMP 430
ST4320STEEL COMP 4320
ST0102STEEL COMP 4320H
ST4337STEEL COMP 4337
ST4340STEEL COMP 4340
ST0104STEEL COMP 4340H
ST4620STEEL COMP 4620
ST4820STEEL COMP 4820
ST5117STEEL COMP 5117
ST5140STEEL COMP 5140
ST6118STEEL COMP 6118
ST8615STEEL COMP 8615
ST8620STEEL COMP 8620
ST8630STEEL COMP 8630
ST8640STEEL COMP 8640
ST8720STEEL COMP 8720
ST8735STEEL COMP 8735
ST8740STEEL COMP 8740
ST9840STEEL COMP 9840
ST0728STEEL COMP AF37
ST0014STEEL COMP B1111
ST0015STEEL COMP B1112
ST0016STEEL COMP B1113
ST0028STEEL COMP E4340
ST0176STEEL COMP M1015
ST0177STEEL COMP MB1006
ST0178STEEL COMP MB1010
ST0046STEEL COMP MT1010
ST0047STEEL COMP MT1015
ST0048STEEL COMP MT1020
ST0049STEEL COMP MTX1015
ST0050STEEL COMP MTX1020
ST0933STEEL COMP Z15CN20-12
ST0963STEEL COMP Z5CNDU21-08
STB000STEEL CORROSION RESISTING
SNB000TIN
TTB000TITANIUM
TTA000TITANIUM ALLOY
TN0004TUNGSTEN ALLOY UNS R07050
ZNB000ZINC
ZNA000ZINC ALLOY
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AEEDXXA000*;SFTT3AEEDXXA000$DPCA000*;SFTT3AEEDXXA000$$DPCA000*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (SF01)Reply
ALB000ALUMINUM
ANA000ANODIZE
ASA000ASBESTOS
CDA000CADMIUM
CMA000CHROMATE
CMC000CHROMATE MAGNESIUM
CMB000CHROMATE ZINC
CRA000CHROMIUM
CUA000COPPER
CUB000COPPER ALLOY
DCA000DICHROMATE
DCB000DICHROMATE POTASSIUM
ENA000ENAMEL
ENB000ENAMEL LUSTERLESS
ENC000ENAMEL SYNTHETIC LUSTERLESS
AUA000GOLD
MTE000GUNMETAL
LQA000LACQUER
PBB000LEAD ALLOY
LCB000LUBRICANT
NLA000NICKEL
LCA000OIL
XXB000OXIDE
XXA000OXIDE FILM
PNA000PAINT
PNB000PAINT HEAT RESISTANT
PSA000PASSIVATE
PHA000PHOSPHATE
PCA000PLASTIC
PCB000PLASTIC POLYTETRAFLUOROETHYLENE
PCC000PLASTIC POLYVINYL CHLORIDE
PRA000PRIMER
AGA000SILVER
LCD000SULFIDE MOLYBDENUM
SNA000TIN
TTA000TITANIUM
VAA000VARNISH
VAB000VARNISH SYNTHETIC
ZNA000ZINC
AHNCLCONNECTION STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE CONNECTION.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AHNCLJ5)
Table 1
Physical Drawing IDReply Code (STYL)Reply
AAB1220G1PLAIN (OPTIONAL END)
AAB1228G11GASKET SEAL
AAB1221G2INVERTED FLARE
AAB1222G3FLARE
AAB1223G4DOUBLE COMPRESSION
AAB1224G5PRESSURE SEAL FLARED
AAB1225G6PRESSURE SEAL FLARELESS
AAB1226G7GASKET SEAL
AAB1227G9GASKET SEAL
AAB1229H1SOCKET
AAB1235H12PRESSURE
AAB1236H13GROOVED
AAB1230H2STREAMLINED WITH ONE BRAZING RING
AAB1231H6SOCKET W/ ONE BRAZING RING
AAB1232H7PLAIN
AAB1233H8CRIMPED
AAB1234H9GROOVED INSIDE
AAB1237J1PLAIN
AAB1238J3COMPRESSION
AAB1239J4FLARED
AAB1240J5FLARELESS
AAB1241J6INVERTED FLARE
AAB1242J7GASKET SEAL
AAB1243J8EXTERNAL SEAT FOR GASKET SEAL
AAB1244K1PLAIN
AAB1245K3BEADED
AAB1246L1BEVELED
AAB1247L3BEVELED
AAB1248M1PLAIN
AAB1249M2INVERTED FLARE
AAB1250M3PLAIN
AAB1251M5FLARE
AAB1252M6PLAIN
IF STYLE/REPLY CODE(s) SM OR SS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and TPMM)
IF STYLE/REPLY CODE(s) NH WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX) or (CQJX and TPMM)
IF STYLE/REPLY CODE(s) NJ OR UN WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX) or (CQJX) or (CQJX and TPMM) or (CQJX and TPMM)
IF STYLE/REPLY CODE(s) JS OR NS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX) or (CQJX) or (CQJX) or (CQJX and TPMM) or (CQJX and TPMM) or (CQJX and TPMM)
IF STYLE/REPLY CODE(s) AN, BE, BF, BR, BS, BW, FB, FP, NP, NT, NZ, PM, PT, SH, SL OR SP WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX)
IF STYLE/REPLY CODE(s) JC, JE, JF, NC, NE OR NF WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX)
IF STYLE/REPLY CODE(s) AU OR AV WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX)
THSDDTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(THSD3AEEDFP*;THSD3AEEDFP$DSL*;THSD3AEEDFP$$DSL*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AVPINTERNAL
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AH06)Reply
ANANPT
AUANSFH
AVASH
BFBRITISH STANDARD FINE (BSF)
BWBRITISH STANDARD WHITWORTH (BSW)
FBBSP.F
BEBSP.F EXT
BSBSP.TR EXT
BRBSP.TR INT
FPF-PTF
SMISO M
SSISO S
MJMJ
NHNH
NZNH-SPCL
SPNPS
SHNPSH
SLNPSL
PMNPSM
NPNPT
NTNPTF
PTPTF-SAE SHORT
UNUN
NCUNC
NEUNEF
NFUNF
NJUNIFIED NATIONAL FINE (UNJ)
JFUNIFIED NATIONAL JOINT FINE (UNJF)
JCUNJC
JEUNJEF
JSUNJS
NSUNS
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJX3AVQJA2.0*;CQJX3AVQJA2.0$JA2.0*;CQJX3AVQJA2.0$$JA2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AVQEXTERNAL
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
TPMM*JTHREAD PITCH IN MILLIMETERS
THE DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(TPMM3AVQJA2.0*;TPMM3AVQJA2.0$JA2.0*;TPMM3AVQJA2.0$$JA2.1*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AVQEXTERNAL
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CQGMJMAXIMUM OPERATING PRESSURE
THE MAXIMUM PRESSURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQGMJK2.0*)
Table 1
Reply Code (AN71)Reply
BBAR
KKILOGRAMS PER SQUARE CENTIMETER
NNEWTONS PER SQUARE CENTIMETER
PPOUNDS PER SQUARE INCH
MEDA*DMEDIA FOR WHICH DESIGNED
THE TYPE OF MEDIA FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(MEDADABB*;MEDADAAS$$DABJ*)
Table 1
Reply Code (AN91)Reply
AAEAIR
AAYFUEL/OIL, HYDROCARBON
ABDGAS, NATURAL
AASHYDRAULIC FLUID
ABBLIQUID, INGESTED
ADLOIL, HYDROCARBON BASE
ABJOXYGEN, GASEOUS
ABKOXYGEN, LIQUID
ACLREFRIGERANT, HALOGENATED
ABPSTEAM
ACTWASTE PRODUCT
ABSWATER, FRESH
ABTWATER, SALT
ACPWATER-OIL-GAS
AEHZJMAXIMUM OPERATING TEMP
THE MAXIMUM TEMPERATURE AT WHICH THE ITEM IS RATED TO OPERATE FOR AN EXTENDED PERIOD OF TIME.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEHZJC2.0*)
Table 1
Reply Code (AB36)Reply
CCELSIUS
FFAHRENHEIT
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDAGG*;CBBLDAFP$$DAFZ*)
Table 1
Reply Code (AN47)Reply
AEQCASEHARDENED
AFNCHAIN
AFPCOTTER PIN
AFQCYANIDE HARDENED
AFSDRY HEAT RESISTANT GASKET
AFRFERRULE
AFXHOOK AND CHAIN ASSEMBLY
DWQLANYARD
AFYLOCK WASHER
AFZNUT
AGAO RING
AFTOIL RESISTANT GASKET
AGBPREINSERTED RING
AMZSAFETY WIRE HOLE
AGCSCREW
AGDSCREW AND CHAIN ASSEMBLY
AFWSEALING GASKET
AGETHREAD RELIEF
AGGTHREADED PLUG
AGFWIRE ROPE
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
Table 1
Reply Code (AC28)Reply
ASPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BSTANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
CDRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
Table 1
Reply Code (AN62)Reply
VFEDERAL MOTOR VEHICLE SAFETY STANDARD
FFLAMMABILITY STANDARD
SGOVERNMENT SPECIFICATION
TGOVERNMENT STANDARD
UINTERNATIONAL STD/SPEC
DMANUFACTURERS SOURCE CONTROL
RMANUFACTURERS SPECIFICATION
NMANUFACTURERS SPECIFICATION CONTROL
MMANUFACTURERS STANDARD
BNATIONAL STD/SPEC
APROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
PPROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
Table 1
Reply Code (AD08)Reply
ALALLOY
BEANNEALED
ANANNEX
APAPPENDIX
ACAPPLICABILITY CLASS
ARARRANGEMENT
ASASSEMBLY
ABASSORTMENT
BFBOND
BXBOX
CYCAPACITY
CACASE
CTCATEGORY
CFCIRCUMFERENCE
CLCLASS
CECODE
CRCOLOR
CCCOMBINATION CODE
CNCOMPONENT
CPCOMPOSITION
CMCOMPOUND
CDCONDITION
AVCONFIGURATION
CSCONSTRUCTION
BGCORE CONDITION
CBCUT OFF
AMDELAY CLASS
DEDESIGN
DGDESIGNATOR
DWDRAWING NUMBER
DUDUPLEX
EGEDGE
ENEND
FYFAMILY
FGFIGURE
AKFILE NUMBER
FNFINISH
FBFLAVOR
BHFLUX PERCENTAGE
FMFORM
FAFORMULA
AJGAGE STOCK NUMBER
GRGRADE
GAGRADUATION
AXGRANULES
AYGRIT
GBGROUND
GPGROUP
HAHEAVY DUTY
BAIMAGE COLOR
NSINSERT
TMITEM
KDKIND
KTKIT
LGLENGTH
LVLEVEL
LTLIMIT
MKMARK
AAMARKER
ADMASK APERTURE
MLMATERIAL
BBMAXIMUM DENSITY
TAMEDIUM TEMPER
MHMESH
MEMETHOD
BCMINIMUM DENSITY
MDMODEL
MTMOUNTING
AQNATURAL
AUNON-DELAY CLASS
NRNUMBER
BLOUTFIT NUMBER
PAPARAGRAPH
PTPART
PNPATTERN
PCPHYSICAL CONDITION
PSPIECE
PLPLAN
PRPOINT
PDPOLISHED
PBPRESSURE RATING
QAQUALITY
QBQUENCHED
RNRANGE
AERAPID
RTRATING
RFREFERENCE NUMBER
RAREGULAR DUTY
BJRMA FLUX
SJSALIENT CHARACTERISTICS
SCSCHEDULE
SBSECTION
SLSELECTION
BDSERIALIZED
SESERIES
SVSERVICE
SXSET
SASHADE
SHSHAPE
SGSHEET
SZSIZE
AGSLOW
TCSOFT TEMPER
SKSOURCE
PZSPECIES
SQSPECIFICATION SHEET
SDSPEED
AWSTANDARD
SRSTRAIGHT
STSTYLE
SSSUBCLASS
SFSUBFORM
SPSUBTYPE
BKSUPPORT
SNSURFACE CONDITION
SYSYMBOL
SMSYSTEM
TBTABLE
TNTANNAGE
TPTEMPER
TXTEXTURE
TKTHICKNESS
TTTREATMENT
TRTRIM
TYTYPE
YNUNIT
AZUNSERIALIZED
VAVARIETY
WTWEIGHT
WDWIDTH
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
Table 1
Reply Code (AN58)Reply
AADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCM2.0*)
Table 1
Reply Code (AN76)Reply
CFCUBIC FEET
CMCUBIC METERS
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
MARK*GSPECIAL MARKINGS
MARKINGS INCLUDED ON AN ITEM FOR THE PURPOSE OF OFFERING INSTRUCTIONS OR WARNINGS OR TO INDICATE THE PURPOSE, FUNCTION, OR APPLICATION OF THE ITEM. EXCLUDES MANUFACTURER'S PART NUMBERS, SYMBOLS, OR THE LIKE.
Enter clear text.
(MARKGCLEARTEXT)
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDPDA000*;PRMTDRTA000$DIRA000*;PRMTDRTA000$$DIRA000*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJAZA000F2.0*;PMWTJAZA000F2.0$$JAZA000F2.1*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
Table 2
Reply Code (AG14)Reply
EGRAINS, TROY
RGRAMS
FOUNCES, TROY
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJPDA0002.0*;PMLCJPDA0002.0$JPDA0002.0*;PMLCJPDA0002.0$$JPDA0002.1*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAB0)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAV0)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ052*;HZRDDHAZ042$$DHAZ011*)
Table 1
Reply Code (HZ00)Reply
HAZ042ASBESTOS
HAZ011CHROMIUM
HAZ012COPPER
HAZ030MAGNESIUM ALLOY
HAZ052ZINC
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)