A winding which is a maintenance item specifically designed for a motor-generator.
ISAC Reply 3AAC added to MRC ADJW.
ISAC Reply 3AAD added to MRC ADJW.
ISAC Reply 3AAE added to MRC ADJW.
ISAC Reply 3AAF added to MRC ADJW.
ISAC Reply 3AEE added to MRC ADJW.
ISAC Reply 3HOU added to MRC ADJW.
ISAC Reply 1A deleted from MRC ADJW.
ISAC Reply 1B deleted from MRC ADJW.
ISAC Reply 1C deleted from MRC ADJW.
ISAC Reply 1D deleted from MRC ADJW.
ISAC Reply 3AAC added to MRC ADJV.
ISAC Reply 3AAD added to MRC ADJV.
ISAC Reply 3AAE added to MRC ADJV.
ISAC Reply 3AAF added to MRC ADJV.
ISAC Reply 3AEE added to MRC ADJV.
ISAC Reply 3HOU added to MRC ADJV.
ISAC Reply 1A deleted from MRC ADJV.
ISAC Reply 1B deleted from MRC ADJV.
ISAC Reply 1C deleted from MRC ADJV.
ISAC Reply 1D deleted from MRC ADJV.
ISAC Reply 3AAC added to MRC ABNM.
ISAC Reply 3AAD added to MRC ABNM.
ISAC Reply 3AAE added to MRC ABNM.
ISAC Reply 3AAF added to MRC ABNM.
ISAC Reply 3AEE added to MRC ABNM.
ISAC Reply 3HOU added to MRC ABNM.
ISAC Reply 1A deleted from MRC ABNM.
ISAC Reply 1B deleted from MRC ABNM.
ISAC Reply 1C deleted from MRC ABNM.
ISAC Reply 1D deleted from MRC ABNM.
ISAC Reply 3AAF added to MRC ABHE.
ISAC Reply 3AEE added to MRC ABHE.
ISAC Reply 3HOU added to MRC ABHE.
ISAC Reply 1A deleted from MRC ABHE.
ISAC Reply 1B deleted from MRC ABHE.
ISAC Reply 1C deleted from MRC ABHE.
ISAC Reply 1D deleted from MRC ABHE.
ISAC Reply 3AAF added to MRC AARX.
ISAC Reply 3AEE added to MRC AARX.
ISAC Reply 3HOU added to MRC AARX.
ISAC Reply 1A deleted from MRC AARX.
ISAC Reply 1B deleted from MRC AARX.
ISAC Reply 1C deleted from MRC AARX.
ISAC Reply 1D deleted from MRC AARX.
ISAC Reply 3AAC added to MRC BCDF.
ISAC Reply 3AAD added to MRC BCDF.
ISAC Reply 3AAE added to MRC BCDF.
ISAC Reply 3AAF added to MRC BCDF.
ISAC Reply 3AEE added to MRC BCDF.
ISAC Reply 3HOU added to MRC BCDF.
ISAC Reply 1A deleted from MRC BCDF.
ISAC Reply 1B deleted from MRC BCDF.
ISAC Reply 1C deleted from MRC BCDF.
ISAC Reply 1D deleted from MRC BCDF.
ISAC Reply 3AAG added to MRC TTQY.
ISAC Reply 3AAH added to MRC TTQY.
ISAC Reply 3AAJ added to MRC TTQY.
ISAC Reply 3AAK added to MRC TTQY.
ISAC Reply 3AEE added to MRC TTQY.
ISAC Reply 3HOU added to MRC TTQY.
ISAC Reply 1A deleted from MRC TTQY.
ISAC Reply 1B deleted from MRC TTQY.
ISAC Reply 1C deleted from MRC TTQY.
ISAC Reply 1D deleted from MRC TTQY.
ISAC Reply 1E deleted from MRC TTQY.
ISAC Reply 1F deleted from MRC TTQY.
ISAC Reply 1G deleted from MRC TTQY.
ISAC Reply 1H deleted from MRC TTQY.
ISAC Reply 1J deleted from MRC TTQY.
ISAC Reply 1K deleted from MRC TTQY.
ISAC Reply 1X deleted from MRC TTQY.
ISAC Reply 3AAC added to MRC BHRL.
ISAC Reply 3AAD added to MRC BHRL.
ISAC Reply 3AAE added to MRC BHRL.
ISAC Reply 3AAF added to MRC BHRL.
ISAC Reply 3AEE added to MRC BHRL.
ISAC Reply 3HOU added to MRC BHRL.
ISAC Reply 1A deleted from MRC BHRL.
ISAC Reply 1B deleted from MRC BHRL.
ISAC Reply 1C deleted from MRC BHRL.
ISAC Reply 1D deleted from MRC BHRL.
ISAC Reply 3AAC added to MRC BHRK.
ISAC Reply 3AAD added to MRC BHRK.
ISAC Reply 3AAE added to MRC BHRK.
ISAC Reply 3AAF added to MRC BHRK.
ISAC Reply 3AEE added to MRC BHRK.
ISAC Reply 3HOU added to MRC BHRK.
ISAC Reply 1A deleted from MRC BHRK.
ISAC Reply 1B deleted from MRC BHRK.
ISAC Reply 1C deleted from MRC BHRK.
ISAC Reply 1D deleted from MRC BHRK.
ISAC Reply 3AAC added to MRC BCDG.
ISAC Reply 3AEE added to MRC BCDG.
ISAC Reply 3HOU added to MRC BCDG.
ISAC Reply 1A deleted from MRC BCDG.
ISAC Reply 1B deleted from MRC BCDG.
ISAC Reply 1C deleted from MRC BCDG.
ISAC Reply 1D deleted from MRC BCDG.
ISAC Reply 3AAC added to MRC BCDH.
ISAC Reply 3AAD added to MRC BCDH.
ISAC Reply 3AEE added to MRC BCDH.
ISAC Reply 3HOU added to MRC BCDH.
ISAC Reply 1A deleted from MRC BCDH.
ISAC Reply 1B deleted from MRC BCDH.
ISAC Reply 1C deleted from MRC BCDH.
ISAC Reply 1D deleted from MRC BCDH.
ISAC Reply 3AAC added to MRC BCDJ.
ISAC Reply 3AAD added to MRC BCDJ.
ISAC Reply 3AEE added to MRC BCDJ.
ISAC Reply 3HOU added to MRC BCDJ.
ISAC Reply 1A deleted from MRC BCDJ.
ISAC Reply 1B deleted from MRC BCDJ.
ISAC Reply 1C deleted from MRC BCDJ.
ISAC Reply 1D deleted from MRC BCDJ.
ISAC Reply 3AAC added to MRC CSWL.
ISAC Reply 3AAD added to MRC CSWL.
ISAC Reply 3AAE added to MRC CSWL.
ISAC Reply 3AAF added to MRC CSWL.
ISAC Reply 3AEE added to MRC CSWL.
ISAC Reply 3HOU added to MRC CSWL.
ISAC Reply 1A deleted from MRC CSWL.
ISAC Reply 1B deleted from MRC CSWL.
ISAC Reply 1C deleted from MRC CSWL.
ISAC Reply 1D deleted from MRC CSWL.
MRC BCDD has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED15294*)
IF STYLE/REPLY CODE(s) ABK WERE ENTERED FOR MRC CSWB, YOU MUST ANSWER MRC (ADJW and ADJV and ABNM)
IF STYLE/REPLY CODE(s) ABL WERE ENTERED FOR MRC CSWB, YOU MUST ANSWER MRC (ADJW and ADJV and ABNM)
IF STYLE/REPLY CODE(s) ABM WERE ENTERED FOR MRC CSWB, YOU MUST ANSWER MRC (ABNM and ABHE and AARX)
CSWBJCOIL TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF COILS PROVIDED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CSWBJABN2*)
| Table 1 |
| Reply Code (AK03) | Reply |
| ABK | CURVED |
| ABL | FLAT |
| ABM | ROUND |
| ABN | UNFORMED |
ADJW*JOUTSIDE LENGTH
A MEASUREMENT OF THE LONGEST OUTSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJW3AAEJAB2.0*;ADJW3AAEJAB2.0$JAB2.0*;ADJW3AAEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAC | SINGLE WINDING |
| 3AAD | FIRST WINDING |
| 3AAE | SECOND WINDING |
| 3AAF | ALL WINDINGS |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference NotesRefer to Reference Drawings for assitance in answering this MRC.
ADJV*JOUTSIDE WIDTH
AN OUTSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJV3AEEJAB2.0*;ADJV3AEEJAB2.0$JAB2.0*;ADJV3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAC | SINGLE WINDING |
| 3AAD | FIRST WINDING |
| 3AAE | SECOND WINDING |
| 3AAF | ALL WINDINGS |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
ABNM*JTHICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABNM3AACJAA2.0*;ABNM3AACJAA2.0$JAA2.0*;ABNM3AACJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAC | SINGLE WINDING |
| 3AAD | FIRST WINDING |
| 3AAE | SECOND WINDING |
| 3AAF | ALL WINDINGS |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
ABHE*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF AN ITEM,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHE3AEEJAA2.0*;ABHE3AEEJAA2.0$JAA2.0*;ABHE3AEEJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAF | ALL WINDINGS |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
AARX*JINSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AARX3AEEJAC2.0*;AARX3AEEJAC2.0$JAC2.0*;AARX3AEEJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAF | ALL WINDINGS |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
BCDFBCONDUCTOR TURN QUANTITY
THE NUMBER OF CONDUCTOR TURN(S) PROVIDED.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(BCDF3AEEB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAC | SINGLE WINDING |
| 3AAD | FIRST WINDING |
| 3AAE | SECOND WINDING |
| 3AAF | ALL WINDINGS |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
TTQYJTERMINAL TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF TERMINALS FOR PROVIDING ELECTRICAL CONNECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit.
(TTQY3AAHJAFF2*;TTQY3AAHJAFF2$$JAFF3*;TTQY3AAHJAFF2$JAFF2*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAG | FIRST TERMINAL TYPE |
| 3AAH | SECOND TERMINAL TYPE |
| 3AAJ | FOURTH TERMINAL TYPE |
| 3AAK | ALL TERMINALS |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN89) | Reply |
| ABL | BINDING POST |
| AHS | BRUSH |
| ABN | CLAMP |
| ADB | CLIP |
| AHT | FLAT WIRE LEAD |
| AHL | JACK |
| AHW | JACK TIP |
| AHX | LUG |
| AHY | RING |
| AHZ | ROUND WIRE LEAD |
| ABQ | SCREW |
| AFF | SOLDER LUG |
| AJA | STUD |
| AFW | TAB |
| ABC | THREADED HOLE |
| AEG | WIRE LEAD W/LUG |
| ACD | WIRE LOOP |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
BHRL*JCOIL INSIDE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE INSIDE LENGTH OF A COIL,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BHRL3AADJAA2.0*;BHRL3AADJAA2.0$JAA2.0*;BHRL3AADJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAC | SINGLE WINDING |
| 3AAD | FIRST WINDING |
| 3AAE | SECOND WINDING |
| 3AAF | ALL WINDINGS |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BHRK*JCOIL INSIDE LENGTH
A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF A COIL,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BHRK3AAEJAC2.0*;BHRK3AAEJAC2.0$JAC2.0*;BHRK3AAEJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAC | SINGLE WINDING |
| 3AAD | FIRST WINDING |
| 3AAE | SECOND WINDING |
| 3AAF | ALL WINDINGS |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BCDG*APARALLEL CONDUCTOR QUANTITY
THE NUMBER OF PARALLEL CONDUCTOR(S) PROVIDED.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(BCDG3AACA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAC | SINGLE WINDING |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
BCDH*JCONDUCTOR WIRE WIDTH
A MEASUREMENT OF THE LARGEST CROSS-SECTIONAL DIMENSION OF THE FLAT SHAPED WIRE TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE WIRE,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BCDH3AEEJAA2.0*;BCDH3AEEJAA2.0$JAA2.0*;BCDH3AEEJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAC | SINGLE WINDING |
| 3AAD | FIRST WINDING |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BCDJ*JCONDUCTOR WIRE THICKNESS
A MEASUREMENT OF THE SMALLEST CROSS-SECTIONAL DIMENSION OF THE FLAT SHAPED WIRE,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BCDJ3AACJAB2.0*;BCDJ3AACJAB2.0$JAB2.0*;BCDJ3AACJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAC | SINGLE WINDING |
| 3AAD | FIRST WINDING |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CSWL*HCONDUCTOR WIRE SIZE
THE SIZE WIRE USED IN THE CONDUCTOR.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below.
(CSWL3AACHMAE2.0*;CSWL3AACHMAE2.0$HMAE2.0*;CSWL3AACHMAE2.0$$HMAE2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAC | SINGLE WINDING |
| 3AAD | FIRST WINDING |
| 3AAE | SECOND WINDING |
| 3AAF | ALL WINDINGS |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA44) | Reply |
| A | AWG |
| M | MCM |
| Table 3 |
| Reply Code (AP07) | Reply |
| BP | 0 |
| BN | 00 |
| BM | 000 |
| BL | 0000 |
| BQ | 1 |
| CA | 10 |
| AS | 1000 |
| CB | 11 |
| AR | 1100 |
| CC | 12 |
| AQ | 1200 |
| CD | 13 |
| AP | 1300 |
| CE | 14 |
| AN | 1400 |
| CF | 15 |
| AM | 1500 |
| CG | 16 |
| AL | 1600 |
| CH | 17 |
| AK | 1700 |
| CJ | 18 |
| AJ | 1800 |
| CK | 19 |
| AH | 1900 |
| BR | 2 |
| CL | 20 |
| BK | 200 |
| AG | 2000 |
| CM | 21 |
| CN | 22 |
| CP | 23 |
| CQ | 24 |
| CR | 25 |
| BJ | 250 |
| AF | 2500 |
| CS | 26 |
| CT | 27 |
| CZ | 28 |
| GD | 29 |
| BS | 3 |
| GE | 30 |
| BH | 300 |
| AE | 3000 |
| GF | 31 |
| GG | 32 |
| GH | 33 |
| GJ | 34 |
| GK | 35 |
| BG | 350 |
| AD | 3500 |
| GL | 36 |
| GM | 37 |
| GN | 38 |
| GP | 39 |
| BT | 4 |
| GQ | 40 |
| BF | 400 |
| AC | 4000 |
| GR | 41 |
| GS | 42 |
| GT | 43 |
| GW | 44 |
| GX | 45 |
| BE | 450 |
| AB | 4500 |
| GY | 46 |
| CY | 5 |
| BD | 500 |
| CW | 5000 |
| BC | 550 |
| BW | 6 |
| BB | 600 |
| BA | 650 |
| BX | 7 |
| AZ | 700 |
| AY | 750 |
| BY | 8 |
| AX | 800 |
| AW | 850 |
| BZ | 9 |
| CX | 900 |
| AT | 950 |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCAT*;CBBLDCAL$$DCAQ*)
| Table 1 |
| Reply Code (AN47) | Reply |
| CAL | INTEGRAL POLE CORE |
| CAN | LAMINATED POLE CORE |
| CAM | LEFT HAND COMMUTATING COIL |
| CAT | RIGHT HAND COMMUTATING COIL |
| CAP | TERMINALS SITUATED FOR CCW MOTOR |
| CAQ | TERMINALS SITUATED FOR CW MOTOR |
| CAR | TINNED WIRE LEADS |
| CAS | YOKE WASHER |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDG4)
| Table 1 |
| Reply Code (EN02) | Reply |
| G4 | COMPREHENSIVE PROCUREMENT GUIDELINE - VEHICULAR PRODUCTS - REBUILT VEHICULAR PARTS |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
AJAH*JUNPACKAGED UNIT HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAHJAA2.0*;AJAHJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJAG*JUNPACKAGED UNIT WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAGJAA2.0*;AJAGJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAK)
| Table 1 |
| Reply Code (AM81) | Reply |
| AB | ABOVE GROUND MAGAZINE |
| A | ANY ACCEPTABLE |
| AT | DOCK LEVEL HEATED WAREHOUSE |
| AX | DOCK LEVEL UNHEATED WAREHOUSE |
| AS | GROUND LEVEL HEATED WAREHOUSE |
| AW | GROUND LEVEL UNHEATED WAREHOUSE |
| AF | IGLOO MAGAZINE |
| AG | IMPROVED OPEN |
| AR | SHED |
| AK | UNIMPROVED OPEN |
AJCN*DPROTECTIVE STORAGE FEATURE
THE PECULIAR STORAGE FEATURE/S/ REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(AJCNDAES)
| Table 1 |
| Reply Code (AA65) | Reply |
| AES | CHILL |
| AET | FREEZE |
| AAN | FUNGUS RESISTANT |
| ADH | GENERAL PURPOSE |
| AEW | HIGH TEMPERATURE |
| AEX | HUMIDITY CONTROLLED |
| AAT | MOISTURE PROOF |
| AEY | NONFLAMMABLE |
| AEZ | SALT AIR RESISTANT |
| AFA | SECURITY |
| AFB | VENTILATED |
AFJQ*JSTORAGE TEMP RANGE
THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFJQJCM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
AJAF*JUNPACKAGED UNIT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING, IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAFJAA2.0*;AJAFJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCN2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CD | CUBIC DECIMETERS |
| CF | CUBIC FEET |
| CN | CUBIC INCHES |
| CM | CUBIC METERS |
AFJN*DFRAGILITY FACTOR
THE MEASURE OF SENSITIVITY OF THE ITEM TO BE PACKAGED. A FACTOR USED BY PACKAGING ENGINEERS IN DEVISING PROPER CUSHIONING IN A PACKAGE.
Enter the applicable reply code from the table below
(AFJNDC)
| Table 1 |
| Reply Code (AD40) | Reply |
| D | DELICATE |
| B | EXTREMELY FRAGILE |
| E | MODERATELY DELICATE |
| F | MODERATELY RUGGED |
| G | RUGGED |
| C | VERY DELICATE |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDPTA000*;PRMTDAGA000$DRHA000*;PRMTDAGA000$$DRHA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJRTA000F2.0*;PMWTJRTA000F2.0$JRTA000F2.0*;PMWTJRTA000F2.0$$JRTA000F2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJPTA0002.0*;PMLCJPTA0002.0$JPTA0002.0*;PMLCJPTA0002.0$$JPTA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3CIMDCCA000*;MATT3CIMDCCA000$DGSB000*;MATT3CIMDCCA000$$DGSB000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAL | SINGLE COVERING MATERIAL |
| 3AAM | FIRST COVERING MATERIAL |
| 3AAN | SECOND COVERING MATERIAL |
| 3AAO | THIRD COVERING MATERIAL |
| 3AEE | OVERALL |
| 3CIM | IMPREGNATION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3HRO | COVERING SINGLE COVERING MATERIAL |
| Table 2 |
| Reply Code (MA01) | Reply |
| CCA000 | COTTON |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| AYA000 | MICA |
| PPA000 | PAPER |
| PCCD00 | PLASTIC POLYVINYL |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3CIMDLQA000*;SFTT3CIMDLQA000$DVAA000*;SFTT3CIMDLQA000$$DVAA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAL | SINGLE COVERING MATERIAL |
| 3AAM | FIRST COVERING MATERIAL |
| 3AAN | SECOND COVERING MATERIAL |
| 3AAO | THIRD COVERING MATERIAL |
| 3AEE | OVERALL |
| 3CIM | IMPREGNATION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3HRO | COVERING SINGLE COVERING MATERIAL |
| Table 2 |
| Reply Code (SF01) | Reply |
| LQA000 | LACQUER |
| VAA000 | VARNISH |
ASWC*DMATERIAL FORM
THE FORM OR STRUCTURE OF THE MATERIAL OF WHICH AN ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ASWC3AEEDACE*;ASWC3AEEDACE$DACE*;ASWC3AEEDACE$$DACE*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3HRO | COVERING SINGLE COVERING MATERIAL |
| Table 2 |
| Reply Code (AL59) | Reply |
| ACE | FABRIC |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)