A mechanical device consisting of one or more tackle blocks with lines, arranged for hoisting or pulling.

FSC Information

3940	Blocks, Tackle, Rigging, and Slings

Colloquial Information

G8337

WIRE FENCE STRETCHER

Change List

MRC STDC has been added

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED11446*)

IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)

STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION

THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.

Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.

(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AEE	OVERALL
	3BBP	SHELL
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (AP33)	Reply
	G	ASSN STD
	A	COMMERCIAL ITEM DESCRIPTION
	K	DEF STAN/SPEC
	B	FED SPEC
	C	FED STD
	L	GOVERNMENT STD/SPEC
	N	INTERNATIONAL STD/SPEC
	F	MFR REF
	D	MIL SPEC
	E	MIL STD
	H	NATIONAL SPEC
	P	NATIONAL STD
	M	NATIONAL STD/SPEC

Table 3
	Reply Code (AP39)	Reply
	M	10TH TREATMENT RESPONSE
	N	11TH TREATMENT RESPONSE
	P	12TH TREATMENT RESPONSE
	Q	13TH TREATMENT RESPONSE
	R	14TH TREATMENT RESPONSE
	S	15TH TREATMENT RESPONSE
	B	1ST TREATMENT RESPONSE
	C	2ND TREATMENT RESPONSE
	D	3RD TREATMENT RESPONSE
	E	4TH TREATMENT RESPONSE
	F	5TH TREATMENT RESPONSE
	H	6TH TREATMENT RESPONSE
	J	7TH TREATMENT RESPONSE
	K	8TH TREATMENT RESPONSE
	L	9TH TREATMENT RESPONSE
	G	ALL TREATMENT RESPONSES
	A	SINGLE TREATMENT RESPONSE

AMCKATACKLE BLOCK QUANTITY

THE NUMBER OF TACKLE BLOCKS PROVIDED.

Enter the numeric reply with a minimum of one digit.

(AMCKA10*)

AMCQASHEAVE QUANTITY

THE NUMBER OF SHEAVES PROVIDED.

Enter the numeric reply with a minimum of one digit.

(AMCQA10*)

AMCTDTACKLE ACCOMMODATED TYPE

INDICATES THE TYPE OF TACKLE THE ITEM WILL ACCOMMODATE.

Enter the applicable reply code from the table below

(AMCTDAH)

Table 1
	Reply Code (AF37)	Reply
	AD	CHAIN
	AK	FIBROUS ROPE
	AH	WIRE ROPE

AMXCJMAXIMUM TACKLE DIAMETER ACCOMMODATED

THE MAXIMUM LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE ACCOMMODATION FOR A TACKLE,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AMXCJA2.0*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

AMXDDTACKLE LOCKING DEVICE

AN INDICATION OF WHETHER OR NOT A TACKLE LOCKING DEVICE IS INCLUDED.

Enter the applicable reply code from the table below

(AMXDDB)

Table 1
	Reply Code (AA49)	Reply
	B	INCLUDED
	C	NOT INCLUDED

AMDCDANTITOPPLING DEVICE

AN INDICATION OF WHETHER OR NOT AN ANTITOPPLING DEVICE IS INCLUDED.

Enter the applicable reply code from the table below

(AMDCDB)

Table 1
	Reply Code (AA49)	Reply
	B	INCLUDED
	C	NOT INCLUDED

AMXFLATTACHMENT STYLE

THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ATTACHMENT.

Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.

(AMXFL1*;AMXFL24$$L33*)

Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
AAI1168	1	OBLONG SWIVEL EYE
AAI1177	10	UPSET SHACKLE IN SHACKLE
AAI1178	11	SIDE SHACKLE IN LINK
AAI1179	12	CLEWLINE EYE
AAI1180	13	RING
AAI1181	14	OBLONG LINK
AAI1182	15	SHOULDERED EYE BOLT W/ SPECTACLE PLATE
AAI1183	16	UPSET SCREW PIN ANCHOR SHACKLE
AAI1184	17	FLATTED LOOSE SAFETY SNAP HOOK
AAI1185	18	FLATTED LOOSE SWIVEL SAFETY SNAP HOOK
AAI1186	19	FLATTED STIFF SWIVEL SAFETY SNAP HOOK
AAI1169	2	OBLONG SWIVEL EYE AND SHACKLE
AAI1187	20	BOSLOC SAFETY HOOK
AAI1188	21	FRONT EYE FLATTED LOOSE HOOK
AAI1189	22	FRONT EYE ROUND LOOSE HOOK
AAI1190	23	FLATTED STIFF SWIVEL HOOK
AAI1191	24	SISTER HOOKS
AAI1192	25	ANCHOR TRIP HOOK
AAI1193	26	LOOSE SWIVEL RAYMOND RELEASING HOOK
AAI1194	27	DRILLED SWIVEL EYE
AAI1195	28	DRILLED SWIVEL EYE AND SHACKLE
AAI1196	29	OBLONG SWIVEL EYE
AAI1170	3	PEAR SHAPED SWIVEL EYE
AAI1197	30	LOOSE SIDE SINGLE SIDE
AAI1198	31	STIFF, UPSET SWIVEL SHACKLE
AAI1199	32	FLATTED LOOSE SWIVEL EYE WITH SWIVEL HOOK
AAI1200	33	SIDE HOOK, LOOSE
AAI1171	4	ROUND SWIVEL EYE
AAI1172	5	SWIVEL JAW AND GUY EYES
AAI1173	6	PEAR SHAPED LINK IN SWIVEL EYE
AAI1174	7	JAW AND EYE SWIVEL
AAI1175	8	LOOSE SWIVEL JAW AND GUY EYES
AAI1176	9	CHAIN SHACKLE

AMRLJTACKLE NOMINAL LENGTH

A MEASUREMENT OF THE LONGEST NOMINAL DIMENSION OF THE TACKLE,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AMRLJM2.0*)

Table 1
	Reply Code (AA05)	Reply
	F	FEET
	M	METERS

IF STYLE/REPLY CODE(s) 10, 11, 12, 18, 19, 20, 21 OR 24 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AMRQ and AMRR and AMRT)

IF STYLE/REPLY CODE(s) 13, 14 OR 17 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AMRQ and AMRR and AMRS and AMRT and AMRW)

IF STYLE/REPLY CODE(s) 15, 16, 22, 23 OR 25 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AMRR and AMRT)

IF STYLE/REPLY CODE(s) 26, 28 OR 29 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AMRQ and AMRR)

IF STYLE/REPLY CODE(s) 27 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AMRR)

IF STYLE/REPLY CODE(s) 1, 2, 3, 4, 6, 8 OR 9 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AMRQ and AMRR and AMRT)

IF STYLE/REPLY CODE(s) 5 OR 7 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AMRR and AMRT)

STYLLSTYLE DESIGNATOR

THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.

(STYLL28*;STYLL7$$L27*)

Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
AAI1136	1	OVAL PATTERN
AAI1145	10	SQUARE PATTERN
AAI1146	11	RECTANGULAR PATTERN
AAI1147	12	HOISTER PATTERN
AAI1148	13	FIDDLE PATTERN
AAI1149	14	FIDDLE PATTERN
AAI1150	15	STRAP PATTERN
AAI1151	16	STRAP AND PLATE PATTERN
AAI1152	17	FIDDLE PATTERN
AAI1153	18	CLUMP PATTERN
AAI1154	19	OVAL PATTERN WITH SNUBBING HOOK
AAI1137	2	OVAL PATTERN
AAI1155	20	PULLEY PATTERN
AAI1156	21	HALYARD PATTERN
AAI1157	22	TROLLEY PATTERN
AAI1158	23	TROLLEY PATTERN
AAI1159	24	OVAL PATTERN WITH ROPE GUARDS
AAI1160	25	HALF-STRAP PATTERN
AAI1161	26	PULLEY PATTERN
AAI1162	27	PLATE PATTERN
AAI1163	28	HALF-DIAMOND PATTERN WITH TWO PULLEYS
AAI1164	29	OVAL PATTERN
AAI1138	3	ROUND PATTERN
AAI1139	4	DIAMOND PATTERN
AAI1140	5	HALF-OVAL PATTERN
AAI1141	6	HALF-OVAL PATTERN
AAI1142	7	HALF-ROUND PATTERN
AAI1143	8	HALF-ROUND PATTERN
AAI1144	9	HALF-DIAMOND PATTERN

AMRQ*JSHELL LENGTH

A MEASUREMENT OF THE LONGEST DIMENSION OF THE SHELL,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AMRQJAB2.0*;AMRQJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AMRR*JSHEAVE OUTSIDE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE SHEAVE,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AMRRJAC2.0*;AMRRJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AMRS*JSECOND SHEAVE OUTSIDE DIAMETER

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AMRSJAA2.0*;AMRSJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AMRT*JCENTER PIN DIAMETER

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AMRTJAC2.0*;AMRTJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AMRW*JSECOND CENTER PIN DIAMETER

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AMRWJAA2.0*;AMRWJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

IF STYLE/REPLY CODE(s) D WERE ENTERED FOR MRC AMCL, YOU MUST ANSWER MRC (AMCN)

AMCLDBLOCK TYPE

INDICATES THE TYPE OF BLOCK.

Enter the applicable reply code from the table below

(AMCLDD)

Table 1
	Reply Code (AE90)	Reply
	B	REGULAR
	D	SNATCH

AMCN*LLOCKING STYLE

THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.

(AMCNL2)

Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
AAI1165	1	SAFETY LOCKING
AAI1166	2	SAFETY W/LATCH PIN
AAI1167	3	DROP LINK

AMWZ*DSHEAVE BEARING LUBRICATION METHOD

THE MEANS BY WHICH THE SHEAVE BEARING IS LUBRICATED.

Enter the applicable reply code from the table below

(AMWZDE*;AMWZDL$$DK*)

Table 1
	Reply Code (AC75)	Reply
	K	OILWAYS
	L	PREPACKED WITH GREASE
	F	PRESSURE GREASE FITTING
	E	SELF-LUBRICATED

IF STYLE/REPLY CODE(s) C, H, J, K, L, M, P OR Q WERE ENTERED FOR MRC AMDB, YOU MUST ANSWER MRC (AMRY)

AMDB*DBECKET TYPE

INDICATES THE TYPE OF BECKET.

Enter the applicable reply code from the table below

(AMDBDJ*;AMDBDM$$DQ*)

Table 1
	Reply Code (AF38)	Reply
	L	CLOSED SOCKET
	P	FIXED EYE
	K	OPEN SOCKET
	Z	OVAL EYE
	H	PLAIN
	Q	ROUND EYE
	C	SHACKLE
	J	SWIVEL EYE
	M	THIMBLE

AMRY*ABECKET QUANTITY

THE NUMBER OF BECKETS PROVIDED.

Enter the numeric reply with a minimum of one digit.

(AMRYA10*)

AKRZ*DTERMINATION TYPE

INDICATES THE TYPE OF FACILITY PROVIDED ON THE DEVICE FOR ATTACHING TO ANOTHER ITEM.

Enter the applicable reply code from the table below

(AKRZDAN*;AKRZDAQ$DAS*;AKRZDAQ$$DAS*)

Table 1
	Reply Code (AE79)	Reply
	AS	CLAMP
	AT	CLIP
	AR	HOIST HOOK
	AN	HOOK
	AP	RING
	AQ	SNAP HOOK

ACSY*JFURNISHED ITEMS AND QUANTITY

THE NAME AND NUMBER OF THOSE PARTS FURNISHED WITH THE ITEM OF SUPPLY THAT HAVE NOT BEEN SPECIFIED ELSEWHERE. PLEASE USE MRC TMQY IN PLACE OF THIS DISCONTINUED MRC.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.

(ACSYJHD2*;ACSYJHD2$$JHD3*)

Table 1
	Reply Code (AB87)	Reply
	HD	CENTER PIN
	HE	SHEAVE

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

ZZZW*GDEPARTURE FROM CITED DOCUMENT

THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.

Enter the reply in clear text.

(ZZZWGAS MODIFIED BY MATERIAL*)

ZZZX*GDEPARTURE FROM CITED DESIGNATOR

THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.

Enter the reply in clear text.

(ZZZXGAS MODIFIED BY MATERIAL*)

ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION

A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.

Enter the Reply Code from the table below.

(ELCDDA*)

Table 1
	Reply Code (AN58)	Reply
	A	ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD

AFHV*JUNPACKAGED UNIT WEIGHT

THE MEASURED WEIGHT OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING MATERIAL. PLEASE USE MRC CTJS IN PLACE OF THIS DISCONTINUED MRC.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AFHVJKL2.0*)

Table 1
	Reply Code (AB16)	Reply
	GM	GRAMS
	KL	KILOGRAMS
	OZ	OUNCES
	LB	POUNDS

SUPP*GSUPPLEMENTARY FEATURES

CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.

Enter the reply in clear text.Separate multiple replies with a semicolon.

(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)

FTLD*GFUNCTIONAL DESCRIPTION

DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.

Enter the reply from the applicable document.

(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)

TMDN*ATYPE/MODEL DESIGNATION

THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.

Enter the alpha-numeric reply with a minimum of one character.

(TMDNAU6)

RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT

INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.

Enter concise statement for similar item including name and identifying data.

Reply to this MRC in accordance with Volume 3.

AGAV*GEND ITEM IDENTIFICATION

THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.

Enter the reply in clear text.

(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY

THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.

Enter the reply in clear text.

(CXCYGLINE PROCESSOR CONTROL BOARD*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

MATTDMATERIAL

THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(MATT3BHLDWDC000*;MATT3BHLDWDC000$DFEA000*;MATT3BHLDWDC000$$DFEA000*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AEE	OVERALL
	3BBP	SHELL
	3BHL	BEARING
	3HOU	LOCATION NOT OTHERWISE SPECIFIED
	3IBC	CENTER PIN
	3IBD	SHEAVE

Table 2
	Reply Code (MA01)	Reply
	ALA000	ALUMINUM
	ALB000	ALUMINUM ALLOY
	CUB000	COPPER ALLOY
	FEA000	IRON
	FEB000	IRON CAST
	PCA000	PLASTIC
	STA000	STEEL
	WDC000	WOOD

SFTT*DSURFACE TREATMENT

THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(SFTT3BBPDPNA000*;SFTT3BBPDPNA000$DPHA000*;SFTT3BBPDPNA000$$DPHA000*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AEE	OVERALL
	3BBP	SHELL
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (SF01)	Reply
	ENA000	ENAMEL
	PNA000	PAINT
	PHA000	PHOSPHATE
	ZNA000	ZINC

BYDT*DBEARING TYPE

INDICATES THE TYPE OF BEARING PROVIDED.

Enter the applicable reply code from the table below

(BYDTDAJ)

Table 1
	Reply Code (AH96)	Reply
	AE	BALL
	AB	PLAIN
	AJ	ROLLER

ASZDJLOAD RATING

THE RATED LOAD THE ITEM IS DESIGNED TO ACCOMMODATE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ASZDJASC2.0*)

Table 1
	Reply Code (AG67)	Reply
	BW	DECANEWTON
	AJ	KILOGRAMS
	AS	POUNDS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CLQL*GCOLLOQUIAL NAME

A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.

Enter the reply in clear text.

(CLQLGWOVEN WIRE CLOTH*)