A manually operated device employed to loosen the bead, demount and/or mount pneumatic tires for various size wheels.

FSC Information

4910	Motor Vehicle Maintenance and Repair Shop Specialized Equipment

Colloquial Information

G9409	TIRE CHANGER,PNEUMATIC TIRE
J3231	FITTING AND REMOVING MACHINE,PNEUMATIC TIRE

Change List

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED10895*)

Reply to this MRC in accordance with Volume 3.

AGAV*GEND ITEM IDENTIFICATION

THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.

Enter the reply in clear text.

(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)

ARAGJCURRENT RATING

THE AMOUNT OF CURRENT FOR WHICH THE ITEM IS DESIGNED.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ARAGJL2.0*;ARAGJL2.0$JL2.0*;ARAGJL2.0$$JL2.1*)

Table 1
	Reply Code (AC30)	Reply
	A	AMPERES
	U	MICROAMPERES
	L	MILLIAMPERES
	N	NANOAMPERES
	B	VOLT-AMPERE
	V	VOLTS

CSBHJVOLTAGE IN VOLTS AND CURRENT TYPE

THE TOTAL ELECTRICAL VOLTAGE,EXPRESSED IN VOLTS,AND THE TYPE OF CURRENT WHETHER ALTERNATING OR DIRECT.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CSBHJDC2.0*;CSBHJDC2.0$JDC2.0*;CSBHJDC2.0$$JDC2.1*)

Table 1
	Reply Code (AN87)	Reply
	AC	AC
	AD	AC/DC
	AP	AC-PEAK
	AR	AC-RMS
	DC	DC

FTLD*GFUNCTIONAL DESCRIPTION

DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.

Enter the reply from the applicable document.

(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)

ARJA*JPRESSURE RATING

THE PRESSURE AT WHICH AN ITEM IS RATED TO OPERATE.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ARJAJF2.0*;ARJAJF2.0$JF2.0*;ARJAJF2.0$$JF2.1*)

Table 1
	Reply Code (AB18)	Reply
	F	BAR
	K	KILOGRAMS PER SQUARE CENTIMETER
	V	POUNDS PER SQUARE INCH

ABMK*JOVERALL WIDTH

AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABMKJAC2.0*;ABMKJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

DAAH*DITEM TYPE CATEGORY

THE CATEGORY THAT IDENTIFIES THE TYPE OF ITEM.

Enter the applicable reply code from the table below

(DAAHDAF*;DAAHDAA$DAE*;DAAHDAA$$DAE*)

Table 1
	Reply Code (TC01)	Reply
	AA	ACCESSORY
	AD	INNER RIM
	AC	ONE PIECE RIM
	AE	OUTER RIM
	AB	TIRE
	AF	WHEEL ASSEMBLY

DAAJ*DACCESSORY TYPE

THE CATEGORY THAT IDENTIFIES THE TYPE OF ACCESSORY.

Enter the applicable reply code from the table below

(DAAJDAA*;DAAJDAK$DAG*;DAAJDAK$$DAG*)

Table 1
	Reply Code (AC47)	Reply
	AK	ADAPTER
	AD	CAP
	AE	CHAIN
	AB	EQUIPMENT
	AJ	FLAP
	AG	INNER TUBE
	AM	RUN FLAT INSERT
	AF	STRAP
	AL	TIRE GAGE
	AA	TOOL
	AH	VALVE
	AC	WHEEL WEIGHT

DAAG*ATIRE VALVE DESIGNATION

THE SIZE DESIGNATION OF THE TIRE VALVE.

Enter the alpha-numeric reply with a minimum of one character.

(DAAGAQ2)

ABHP*JOVERALL LENGTH

THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABKW*JOVERALL HEIGHT

THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

HUES*DCOLOR

A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.

Enter the applicable reply code from the table below

(HUESDRE0000*;HUESDGY0000$DBL0000*;HUESDGY0000$$DBL0000*)

Table 1
	Reply Code (AD06)	Reply
	BL0000	BLACK
	GY0000	GRAY/GREY
	RE0000	RED

BDWW*JWATTAGE RATING

THE RATED POWER THAT AN ITEM CAN SAFELY CONSUME OR PROVIDE.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BDWWJBC2.0*)

Table 1
	Reply Code (AB49)	Reply
	BC	KILOWATTS
	AT	WATTS

TMDN*ATYPE/MODEL DESIGNATION

THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.

Enter the alpha-numeric reply with a minimum of one character.

(TMDNAC4)

MATT*DMATERIAL

THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.

Enter the applicable reply code from the table below

(MATTDSTA000*;MATTDSTB000$DALB000*;MATTDSTB000$$DALB000*)

Table 1
	Reply Code (MA01)	Reply
	ALB000	ALUMINUM ALLOY
	STA000	STEEL
	STB000	STEEL CORROSION RESISTING

Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.

MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION

THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.

Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.

(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)

Table 1
	Reply Code (AP33)	Reply
	G	ASSN STD
	K	DEF STAN/SPEC
	B	FED SPEC
	C	FED STD
	L	GOVERNMENT STD/SPEC
	N	INTERNATIONAL STD/SPEC
	F	MFR REF
	D	MIL SPEC
	E	MIL STD
	H	NATIONAL SPEC
	P	NATIONAL STD
	M	NATIONAL STD/SPEC

Table 2
	Reply Code (AP18)	Reply
	M	10TH MATERIAL RESPONSE
	N	11TH MATERIAL RESPONSE
	P	12TH MATERIAL RESPONSE
	Q	13TH MATERIAL RESPONSE
	R	14TH MATERIAL RESPONSE
	S	15TH MATERIAL RESPONSE
	T	16TH MATERIAL RESPONSE
	U	17TH MATERIAL RESPONSE
	W	18TH MATERIAL RESPONSE
	X	19TH MATERIAL RESPONSE
	B	1ST MATERIAL RESPONSE
	Y	20TH MATERIAL RESPONSE
	Z	21ST MATERIAL RESPONSE
	V	22ND MATERIAL RESPONSE
	C	2ND MATERIAL RESPONSE
	D	3RD MATERIAL RESPONSE
	E	4TH MATERIAL RESPONSE
	F	5TH MATERIAL RESPONSE
	H	6TH MATERIAL RESPONSE
	J	7TH MATERIAL RESPONSE
	K	8TH MATERIAL RESPONSE
	L	9TH MATERIAL RESPONSE
	G	ALL MATERIAL RESPONSES
	A	SINGLE MATERIAL RESPONSE

STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION

THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.

(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)

Table 1
	Reply Code (AP33)	Reply
	G	ASSN STD
	A	COMMERCIAL ITEM DESCRIPTION
	K	DEF STAN/SPEC
	B	FED SPEC
	C	FED STD
	L	GOVERNMENT STD/SPEC
	N	INTERNATIONAL STD/SPEC
	F	MFR REF
	D	MIL SPEC
	E	MIL STD
	H	NATIONAL SPEC
	P	NATIONAL STD
	M	NATIONAL STD/SPEC

Table 2
	Reply Code (AP39)	Reply
	M	10TH TREATMENT RESPONSE
	N	11TH TREATMENT RESPONSE
	P	12TH TREATMENT RESPONSE
	Q	13TH TREATMENT RESPONSE
	R	14TH TREATMENT RESPONSE
	S	15TH TREATMENT RESPONSE
	B	1ST TREATMENT RESPONSE
	C	2ND TREATMENT RESPONSE
	D	3RD TREATMENT RESPONSE
	E	4TH TREATMENT RESPONSE
	F	5TH TREATMENT RESPONSE
	H	6TH TREATMENT RESPONSE
	J	7TH TREATMENT RESPONSE
	K	8TH TREATMENT RESPONSE
	L	9TH TREATMENT RESPONSE
	G	ALL TREATMENT RESPONSES
	A	SINGLE TREATMENT RESPONSE

SFTT*DSURFACE TREATMENT

THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.

Enter the applicable reply code from the table below

(SFTTDANA000*;SFTTDPNA000$DCDA000*;SFTTDPNA000$$DCDA000*)

Table 1
	Reply Code (SF01)	Reply
	ZNL000	ACRYLIC COATED
	ANA000	ANODIZE
	CDA000	CADMIUM
	CMA000	CHROMATE
	CRA000	CHROMIUM
	PNA000	PAINT
	PRA000	PRIMER

AMWN*AMODEL NUMBER

THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE ITEM.

Enter the alpha-numeric reply with a minimum of one character.

(AMWNAF3)

AKYD*GACCESSORY COMPONENTS AND QUANTITY

THE NAME AND NUMBER OF PARTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.

Enter clear text.

(AKYDGCLEARTEXT)

FCLS*AFUNCTIONAL CLASSIFICATION

THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.

Enter the alpha-numeric reply with a minimum of one character.

(FCLSAB1)

RDAL*GREFERENCE DATA AND LITERATURE

LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.

Enter data appropriate and in a concise manner to identify informational references covering the item.

(RDALGNAAVAIROIA/VFK58 A-2.2.9*)

NTRD*AENTRY DATE

INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.

Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.

(NTRDA80-05-28*)

CBBL*DFEATURES PROVIDED

THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.

Enter the applicable reply code from the table below

(CBBLDGEE*;CBBLDGEF$$DGEG*)

Table 1
	Reply Code (AN47)	Reply
	GEM	AUTOMATED OIL HEATER
	GEK	CENTERING CLAMPS
	GEL	DEMOUNT ROD
	GEE	ELECTRIC MOTOR
	GEN	EMERGENCY SHUTOFF SWITCH
	GEF	FOOT PEDAL
	DRY	HYDRAULICALLY ERECTED
	GEG	INFLATION GAGE
	ASA	REMOTE CONTROL
	GEJ	RUNFLAT LUBRICATE
	GEH	VALVE CORE & CAPS

CDLX*JTIRE DIAMETER FOR WHICH DESIGNED

THE DIAMETER OF THE TIRE FOR WHICH THE ITEM IS DESIGNED.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CDLXJL2.0*;CDLXJL2.0$$JL2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

AZJL*JWHEEL SEAT DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE WHEEL SEAT,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AZJLJLA2.0*;AZJLJLA2.0$$JLA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ALRE*DTIRE TYPE

INDICATES THE TYPE OF TIRE(S) PROVIDED.

Enter the applicable reply code from the table below

(ALREDCN)

Table 1
	Reply Code (AH67)	Reply
	CM	TUBE
	CN	TUBELESS

AQFK*GLOUDNESS LEVEL IN DECIBELS

THE LEVEL OF A SIGNAL OR SOUND RELATIVE TO A SPECIFIC DISTANCE,EXPRESSED IN DECIBELS.

Enter clear text.

(AQFKGCLEARTEXT)

AJJZ*DDOCUMENT TYPE

INDICATES THE TYPE OF DOCUMENT BY THE TITLE.

Enter the applicable reply code from the table below

(AJJZDEZ*;AJJZDCW$DCC*;AJJZDCW$$DCC*)

Table 1
	Reply Code (AF70)	Reply
	CB	AIR FORCE SPECIFICATION
	CE	ARMED SERVICES CATALOG
	DM	ARMY MODIFICATION WORK ORDER
	EB	ARMY SERVICE CATALOG
	BC	ARMY SUPPLY CATALOG
	AZ	ARMY SUPPLY MANUAL
	EF	ARMY TECHNICAL MANUAL
	BD	BILL OF MATERIAL
	EP	BUMED AUTHORIZED ALLOWANCES
	EQ	BUMED FLEET MARINE FORCE AUTHORIZED ALLOWANCES
	BE	CATALOG SHEET
	AW	CERTIFIED
	CC	CHARACTERISTICS RECORD
	AY	CHEMICAL WARFARE SUPPLY CATALOG
	FD	CIVIL STANDARD
	CD	COMMERCIAL CATALOG
	DJ	COMMERCIAL LEAFLET
	ED	COMMERCIAL MANUAL
	EE	COMMUNICATION EQUIPMENT PARTS CATALOG
	ET	COMPLETE EQUIPMENT SCHEDULE
	CG	CRYSTAL FREQUENCY LIST
	CH	DESIGN CONTROL DRAWING
	DX	DRAWING
	DK	ELECTRONICS CATALOG
	AN	ENGINEERING DRAWING
	BF	ENGINEERING ORDER
	BG	ENGINEERING PARTS LIST
	DQ	ENGINEERING RECORDS
	FC	EQUIPMENT CHECK LIST
	DR	EQUIPMENT OVERHAUL AND ISSUE INSTRUCTIONS
	AK	EQUIPMENT SETS
	AE	FEDERAL SPECIFICATION
	CF	FEDERAL SUPPLY CATALOG
	CL	FIELD BULLETIN
	CJ	FIELD CHANGE BULLETIN
	AA	FOREST SERVICE SPECIFICATION
	BH	FORM SHEET
	EY	GERMAN DEFENCE EQUIPMENT STANDARD
	EZ	GERMAN INDUSTRY STANDARD
	BJ	INDUSTRIAL CATALOG
	BK	INDUSTRIAL DRAWING
	AP	INDUSTRIAL SPECIFICATION
	CK	INITIAL OUTFITTING LIST
	EJ	INSTRUCTION BOOK
	DL	INSTRUCTION BOOK 107
	AT	INSTRUCTION MANUAL
	CM	INTERNAL DISASSEMBLY INSTRUCTIONS
	FA	INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
	CP	LETTER
	AQ	MAINTENANCE HANDBOOK
	EG	MAINTENANCE INSTRUCTIONS HANDBOOK
	EK	MAINTENANCE MANUAL
	BL	MAINTENANCE PARTS LIST
	EW	MANUFACTURER BILL OF MATERIAL
	DN	MARINE CORPS STOCK LIST
	DH	MARINE CORPS STOCK LIST, ENGINEER
	EX	MATABW EQUIPMENT COMPONENT LIST
	CR	MATERIAL LIST
	BM	MEDICAL CATALOG
	CS	MFR BULLETIN
	CT	MFR CATALOG
	CV	MFR DRAWING
	CX	MFR LETTER
	BN	MILITARY DRAWING
	AC	MILITARY SPECIFICATION
	AF	MILITARY STANDARD
	BQ	MODIFICATION INSTRUCTION
	BR	MODIFICATION KIT PUBLICATION
	BP	MODIFICATION WORK ORDER
	FB	NATIONAL TECHNICAL TERMS OF DELIVERY
	EC	NAVY CATALOG OF MATERIAL
	ER	NAVY CATALOGUE OF ADVANCED BASE FUNCTIONAL COMPONENTS
	AR	NOMENCLATURE CARD
	EH	OPERATING INSTRUCTIONS HANDBOOK
	DZ	ORDNANCE PAMPHLET
	CU	PACKAGE LIST
	CN	PACKING INSTRUCTIONS
	AL	PACKING LIST
	BS	PARTS CATALOG
	EL	PARTS CONTROL LIST
	BT	PARTS LIST
	DW	PRELIMINARY INSTRUCTION BOOK
	CW	PROCUREMENT PACKAGE LIST
	CY	PROCUREMENT PARTS LIST
	CZ	PROCUREMENT SPECIFICATION
	DA	PRODUCT IDENTIFICATION CHART
	DB	PROJECT ORDER
	BW	PURCHASE DESCRIPTION
	EA	REPAIR MANUAL
	AS	REPAIR PARTS LIST
	BX	SERVICE BULLETIN
	DY	SERVICE INSTRUCTION
	EM	SERVICE INSTRUCTIONS, HANDBOOK
	EN	SERVICE MANUAL
	BA	SETS OF ENGINEER EQUIPMENT
	BY	SIGNAL CORPS SPECIFICATION
	FE	SOURCE CONTROL DRAWING
	DP	SPECIAL TOOL LIST
	DC	SPECIFICATION
	DD	STANDARD NOMENCLATURE LIST
	AM	STOCK LIST
	BZ	SUPPLY BULLETIN
	AH	SUPPLY CATALOG
	BB	SUPPLY CATALOG COMPONENT LIST
	DG	SUPPLY INSTRUCTIONS
	AJ	SUPPLY MANUAL
	DE	SUPPORT EQUIPMENT REQUIREMENT SHEET
	DF	TABLE OF ALLOWANCES
	AX	TECHNICAL
	CA	TECHNICAL BULLETIN
	AB	TECHNICAL MANUAL
	DS	TECHNICAL MANUAL, OVERHAUL INSTRUCTIONS
	AG	TECHNICAL ORDER
	DT	TECHNICAL PUBLICATION
	AD	TRAINING MANUAL
	ES	UNIT ASSEMBLAGE
	CQ	WORK ORDER

FAAZ*DPHASE

THE NUMBER OF ALTERNATING CURRENT PHASES.

Enter the applicable reply code from the table below

(FAAZDB*;FAAZDC$DA*;FAAZDC$$DA*)

Table 1
	Reply Code (AD02)	Reply
	A	SINGLE
	C	THREE
	B	TWO

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	CS	CONSTRUCTION
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	FN	FINISH
	FM	FORM
	FA	FORMULA
	GR	GRADE
	GP	GROUP
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LT	LIMIT
	MK	MARK
	AA	MARKER
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	NR	NUMBER
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	QA	QUALITY
	RN	RANGE
	RT	RATING
	RF	REFERENCE NUMBER
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH