A portable shelter of canvas or other strong fabric supported by air pressure, light rigid framework, or poles. It may have one end open for attachment to a building, equipment, or another tent. Although it may be provided with a floor, it is not designed for erection on a foundation. See also BUILDING, PREFABRICATED (as modified).
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED10873*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDMSY000*;MATT3AEEDMSY000$DPHEP01*;MATT3AEEDMSY000$$DPHEP01*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AHY | INSULATION |
| 3BGK | FLOOR |
| 3CIL | COATING |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3JAW | TENT |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL6063 | ALUMINUM ALLOY 6063 |
| CCA000 | COTTON |
| MSY000 | DUCK |
| FBB001 | FABRIC, NYLON |
| POL001 | FABRIC, POLYESTER |
| ZSF000 | FABRIC,REINFORCED PLASTIC |
| FG0000 | FIBERGLASS |
| GSB000 | GLASS FIBER |
| FBF000 | MODACRYLIC |
| FBB000 | NYLON |
| PHEP00 | PHOSPHATE ESTER PLASTICER |
| PHEP01 | PHTHALATE ESTER PLASTICER |
| PCA000 | PLASTIC |
| PCP000 | PLASTIC POLYAMIDE |
| PCW000 | PLASTIC POLYESTER |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE |
| PCAP00 | PLASTIC VINYL |
| PCDA02 | POLYAMIDE FABRIC |
| PCDA01 | POLYAMIDE NYLON |
| POL000 | POLYESTER, WEBBING |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RC0006 | RUBBER CHLOROSULFONATED POLYETHYLENE CLASS CSM |
| STA000 | STEEL |
| VYA000 | VINYL FABRIC REINFORCED |
| WDC000 | WOOD |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AHY | INSULATION |
| 3BGK | FLOOR |
| 3CIL | COATING |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3JAW | TENT |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
AQDXDTENT TYPE
INDICATES THE SPECIFIC TYPE OF TENT PROVIDED.
Enter the applicable reply code from the table below
(AQDXDDH*;AQDXDCW$DDZ*)
| Table 1 |
| Reply Code (AL02) | Reply |
| AB | AERIAL CABLE SPLICERS |
| BU | A-FRAME |
| AC | AIR SUPPORTED |
| AD | AIR SUPPORTED, DOUBLE WALL, VEHICLE MAINTENANCE, SMALL, ARCTIC |
| DE | ALPINE HIGH COUNTRY CAMPER, FOUR-MAN |
| BV | ALTERNATE SHELTER |
| DN | ANTICONTAMINATION |
| AF | ARCTIC SURVIVAL |
| AE | ARCTIC, 10 MAN |
| AG | ASSEMBLY, M1942 |
| AH | ASTRONOMICAL |
| AJ | AVIATION MAINTENANCE, MEDIUM, DOUBLE WALL, AIR SUPPORTED/ANL-139 |
| DU | BRIEFING SHELTER |
| DJ | CANOPY |
| AK | CEMETERY CHAPEL FRAME |
| EJ | CLASS I LARGE MODULAR GENERAL PURPOSE WITH INTERNAL FRAME |
| EH | CLASS I MODULAR GENERAL PURPOSE WITH INTERNAL FRAME |
| AL | COMMAND POST |
| CN | COMMAND POST, 1/4 TONTRAILER MTD |
| CP | COMMAND POST, M-1945 |
| CW | COMMUNICATION CENTER COMPLEX |
| AM | COMMUNICATION VEHICLE, M-151 |
| AN | CONSOLE, ASSAULT FIRE COMMAND, GUIDED MISSILE, AN/TSW-4 |
| AP | CONSOLE, ASSAULT FIRE CONTROL, HAWK MISSILE SYSTEM |
| DA | CONSOLE, HIGH POWER ILLUMINATOR, HAWK MISSILE SYSTEM |
| DB | CONSOLE, MAINTENANCE TEST SHOP, HAWK MISSILE SYSTEM |
| DC | CONSOLE, PULSE ACQUISITION RADAR, HAWK MISSILE SYSTEM |
| DD | CONSOLE, RANGE ONLY RADAR, CW ACQUISITION RADAR AND CW ILLUMINATOR, HAWK MISSILE SYSTEM |
| AQ | CONSOLE, TRACK ANTENNA EQUIPMENT |
| EF | COVERS |
| DW | DECONTAMINATION |
| CU | DECONTAMINATION SHELTER |
| AR | EXPANDABLE FRAME |
| DX | EXPANDED SOLDIER CREW |
| AS | EXPANSION ASSEMBLY |
| DH | EXTENDABLE MODULAR |
| DZ | EXTERNAL A-FRAME |
| DT | FIFTEEN-MAN ARTIC |
| EG | FLAME RESISTANT FABRIC LINER |
| AT | FRAME |
| AW | FRAME, AIRCRAFT MAINTENANCE, A-IA |
| AX | FRAME, AIRCRAFT MAINTENANCE, SMALL, TEMPERATE CLIMATE |
| AY | FRAME, BALLOON INFLATION, M1957 |
| AZ | FRAME, EXPANDABLE, LIGHTWEIGHT |
| BA | FRAME, EXTENDIBLE |
| CQ | FRAME, INSULATED |
| BB | FRAME, INSULATED, SECTIONAL |
| BC | FRAME, MAINTENANCE, MEDIUM |
| BD | FRAME, MAINTENANCE, MEDIUM, LIGHT METAL |
| CR | FRAME, UNIVERSAL FIELD MAINTENANCE |
| BE | FRAME, WALL, LIGHT METAL |
| CV | GABLE SHELTER |
| BF | GENERAL PURPOSE, LARGE |
| DF | GENERAL PURPOSE, LARGE, LIGHTWEIGHT |
| BG | GENERAL PURPOSE, MEDIUM |
| BH | GENERAL PURPOSE, SMALL |
| BJ | GENERAL PURPOSE, SMALL, LIGHTWEIGHT |
| BK | GROUND, CABLE SPLICERS |
| DP | HALLWAY SHELTER |
| BL | HATCH |
| BM | HATCH, SPLIT RIDGE, SEATTLE |
| BN | HEXAGONAL, LIGHTWEIGHT, M-1950 |
| FN | JUNGLE |
| BP | KITCHEN, FLY PROOF, M-1948 |
| EA | LIGHT EXPEDITIONARY SHELTER |
| EB | LIGHT WEIGHT EXTREME WEATHER |
| DG | LIGHTWEIGHT, PORTABLE |
| BR | MAINTENANCE SHELTER |
| BQ | MAINTENANCE, MEDIUM |
| EC | MEDICAL SHELTER |
| AU | MEDIUM SHELTER, VERSION 2 |
| ED | MILTRAC SHELTER |
| BS | MOUNTAIN, TWO-MAN |
| BT | NIKE HERCULES, AIR SUPPORTED |
| BW | NIKE HERCULES, AIR SUPPORTED, DOUBLE WALL |
| BX | OBSERVING, ASTRONOMIC, RECTANGULAR |
| CY | OBSERVING, HEXAGONAL, GROUND |
| BY | OBSERVING, TRIANGULATION, GROUND |
| DV | ONE PERSON COMBAT |
| BZ | POLE SUPPORTED, LEAN-TO, REVERSIBLE |
| CA | PONTOON BARGE |
| CB | PYRAMIDAL |
| CC | PYRAMIDAL, SURVIVAL, 3-4 MAN, SRU-I/P |
| EL | QUICK ERECT |
| CD | RADOME, AIR SUPPORTED |
| CE | RADOME, AIR SUPPORTED, SINGLE WALL, NIKE HERCULES SYSTEM |
| CT | SECTIONAL ASSEMBLY, CIRCUS TYPE |
| CS | SECTIONAL, HOSPITAL |
| EM | SHELTER |
| EN | SMALL |
| DR | SMALL SHELTER |
| DS | SMALL SHELTER-VERSION FOUR |
| EP | SOLDIER CREW |
| CF | SQUAD M-1942 |
| CX | SUNSHIELD, THEODOLITE |
| EQ | SURGERY WHITE SHELTER |
| CG | TENT ASSEMBLY |
| AV | THREE SEASON PERSON |
| CH | TRUNCATED, PYRAMIDAL, THEODOLITE PROTECTION |
| DY | TWO-MAN EXPEDITION |
| EK | TYPE III CLASS I MEDIUM MODULAR GENERAL PURPOSE |
| EE | TYPE III SMALL MODULAR GENERAL PURPOSE WITH INTERNAL FRAME |
| CJ | UNIVERSAL FIELD MAINTENANCE, FRAME |
| ER | VEHICLE MAINTENANCE SHELTER |
| CK | WALL |
| CL | WALL, LARGE |
| CM | WALL, SMALL |
| CZ | WEAPONS READY SERVICE SHELTER AND HANDLING SYSTEM |
AKKKJCLOTH WEIGHT
A DESIGNATION EXPRESSED IN UNITS OF WEIGHT PER SQUARE OR LINEAR YARD OF A SPECIFIED /BASIC/ WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKKKJAGC2.0*;AKKKJAGC2.0$$JAGC2.1*)
| Table 1 |
| Reply Code (AG69) | Reply |
| AP | GRAMS PER SQUARE METER |
| AG | OUNCES PER SQUARE YARD |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AQDY*DCOATING MATERIAL LOCATION
INDICATES THE LOCATION ON THE ITEM TO WHICH A COATING HAS BEEN APPLIED.
Enter the applicable reply code from the table below
(AQDYDADC)
| Table 1 |
| Reply Code (AJ91) | Reply |
| ADC | BOTH SIDES |
| ADD | ONE SIDE |
AQEK*JCOATED MATERIAL WEIGHT
A RELATIVE MEASURE OF THE MASS OF AN ITEM WITH RESPECT TO ITS DENSITY AFTER COATING.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AQEKJAGB2.0*;AQEKJAGB2.0$$JAGB2.1*)
| Table 1 |
| Reply Code (AG69) | Reply |
| AP | GRAMS PER SQUARE METER |
| AG | OUNCES PER SQUARE YARD |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable reply code from the table below
(ADZCDBS*;ADZCDDZ$DAJ*;ADZCDDZ$$DAJ*)
| Table 1 |
| Reply Code (AA65) | Reply |
| FH | AROMATIC HYDROCARBON FLUID RESISTANT |
| AKK | BREATHABLE |
| BB | FIRE RESISTANT |
| GP | FUNGUS RESISTANT |
| AJ | MILDEW RESISTANT |
| AK | OIL RESISTANT |
| DZ | WATER REPELLENT |
| BS | WATER RESISTANT |
| AQ | WATERPROOF |
| BT | WEATHER RESISTANT |
HUESDCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDRE0076*;HUESDYE0000$DBU0026*;HUESDYE0000$$DBU0026*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| MS0416 | ARTIC CAMOUFLAGE |
| BL0000 | BLACK |
| BL0039 | BLACK, LUSTERLESS |
| BU0000 | BLUE |
| BU0026 | BLUE, LIGHT |
| BU0027 | BLUE, LIGHT TRANSPARENT |
| BU0033 | BLUE, NAVY |
| BU0042 | BLUE, ROYAL |
| BR0000 | BROWN |
| BR0194 | BROWN, FED STD 595, 30325 |
| MS0066 | CAMOUFLAGE |
| MS0339 | CAMOUFLAGE, WOODLAND |
| GY0010 | GRAY, DECK |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0507 | GREEN 383, FED STD 595, 34094 |
| GR0321 | GREEN, CAMOUFLAGE |
| GR0024 | GREEN, FOREST |
| GR0032 | GREEN, LIGHT |
| GR0082 | GREEN, MOSS |
| GR0011 | GREEN, OLIVE |
| GR0509 | GREEN, OLIVE DRAB |
| GR0007 | GREEN, SAGE |
| GR0516 | GREEN,CAMOUFLAGE,483 |
| KH0000 | KHAKI |
| MC0000 | MULTICAMOUFLAGE |
| NA0000 | NATURAL |
| LD0000 | OLIVE DRAB |
| LD0052 | OLIVE DRAB, FED STD 595, 14084 |
| LD0051 | OLIVE DRAB, FED STD 595, 24084 |
| LD0007 | OLIVE DRAB, QM-107 |
| LD0004 | OLIVE DRAB, QM-7 |
| RG0003 | ORANGE, BLAZE |
| RG0027 | ORANGE, FED STD 595, 12197-1 |
| RG0028 | ORANGE, FED STD 595, 12197-2 |
| RG0008 | ORANGE, INDIAN |
| MS0076 | PEARL, MINERAL |
| MS0326 | PUMPKIN |
| RE0000 | RED |
| RE0075 | RED, FED STD 595, 11136-1 |
| RE0076 | RED, FED STD 595, 11136-2 |
| RE0090 | RED, NEON |
| MS0049 | SAND |
| SL0000 | SILVER |
| TA0000 | TAN |
| TA0010 | TAN, DESERT |
| MS0056 | TERRA COTTA |
| MS0083 | TRANSPARENT-INVALID |
| WH0000 | WHITE |
| YE0000 | YELLOW |
AJNJ*ASHADE IDENTIFICATION
A DESIGNATION ASSIGNED TO A PARTICULAR GRADATION OF A COLOR FOR PURPOSE OF READY IDENTIFICATION.
Enter the alpha-numeric reply with a minimum of one character.
(AJNJAT7)
AJNG*DSHADE SOURCE
THE NAME OF THE REFERENCE SOURCE OF THE SHADE IDENTIFICATION DESIGNATOR.
Enter the applicable reply code from the table below
(AJNGDCL*;AJNGDAE$DAB*;AJNGDAE$$DAB*)
| Table 1 |
| Reply Code (AF94) | Reply |
| AF | COLOR ASSOCIATION OF THE US |
| AG | FEDERAL STANDARD 595 |
| CL | MIL-C-12095 |
| AH | MUNSELL |
| AN | QM |
| AB | US AIR FORCE |
| AC | US ARMY |
| AD | US MARINE CORPS |
| AE | US NAVY |
AQJDDFLOOR SHAPE
THE PHYSICAL CONFIGURATION OF THE FLOOR.
Enter the applicable reply code from the table below
(AQJDDBT*;AQJDDRD$DRT*)
| Table 1 |
| Reply Code (AD07) | Reply |
| HE | HEXAGONAL |
| CT | OCTAGONAL |
| BT | OVAL |
| BV | PENTAGON |
| AMP | POLYGON |
| RT | RECTANGULAR |
| RD | ROUND |
| ASL | SQUARE |
| TR | TRIANGULAR |
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJFB2.0*;ABRYJFB2.0$$JFB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMZ*JDIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMZJFA2.0*;ABMZJFA2.0$$JFA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJFC2.0*;ABGLJFC2.0$$JFC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AQJE*GLATERAL SIDE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A LATERAL SIDE OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter clear text.
(AQJEGCLEARTEXT)
AQJF*JCENTER HEIGHT
A MEASUREMENT FROM THE CENTER TO THE TOP OF AN ITEM,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AQJFJFA2.0*;AQJFJFA2.0$$JFA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AQJG*JPEAK HEIGHT
A MEASUREMENT FROM THE BASE TO THE PEAK OF AN ITEM,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AQJGJFB2.0*;AQJGJFB2.0$$JFB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHRR*JRIDGE HEIGHT
A MEASUREMENT FROM THE BASE TO THE RIDGE,IN DISTICTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHRRJFC2.0*;AHRRJFC2.0$$JFC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AQJH*JSIDEWALL HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF A SIDEWALL,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AQJHJFB2.0*;AQJHJFB2.0$$JFB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AQJJ*JRIDGE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A RIDGE OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AQJJJFA2.0*;AQJJJFA2.0$$JFA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AQJK*GTENT SECTION AND QUANTITY
THE SPECIFIC SECTION(S) OF THE TENT AND THE NUMBER REQUIRED.
Enter clear text.
(AQJKGCLEARTEXT)
IF YOU ANSWER MRC AQHL, YOU MUST ANSWER MRC (AQJM and AJJW)
AQHL*GCOMPONENT NAME
THE NAME OF THE COMPONENT ASSIGNED BY THE CONTROLLING AGENCY.
Enter clear text.
(AQHLGCLEARTEXT)
AQJM*ACOMPONENT NATIONAL STOCK NUMBER
THE NATIONAL STOCK NUMBER OF THE COMPONENT PART/S/ SUPPLIED WITH THE ITEM.
Enter the National Stock Number.
(AQJMA6520-00-542-2035*; AQJMA6520-00-301-4256$$A6520-00-305-0933*)
AJJW*ACOMPONENT QUANTITY
THE NUMBER OF COMPONENTS INCLUDED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AJJWA10*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
PGCD*APROCUREMENT GROUP CODE
A FIVE DIGIT NUMERIC CODE USED TO GROUP INDIVIDUAL SIZES OF A STANDARD GENERIC ITEM.
Enter the numeric reply with five digit(s) exactly.
(PGCDA11111)
SSEQ*ASIZE SEQUENCE INDICATOR
A THREE DIGIT NUMERIC CODE USED FOR SEQUENCING ITEMS IN ASCENDING SIZE ORDER FROM SMALLEST TO LARGEST SIZE. - MRC WAS CANCELED BECAUSE THE MRC DOES NOT MAKE SENSE, IT WAS NOT REPLACED AS NO ONE UNDERSTANDS THIS MRC AND WHAT THE CODED REPLIES EQUATE TO.
Enter the numeric reply with three digit(s) exactly.
(SSEQA111)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCC2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3CILDNYC000*;SFTT3CILDNYC000$DNYC000*;SFTT3CILDNYC000$$DNYC000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AHY | INSULATION |
| 3BGK | FLOOR |
| 3CIL | COATING |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3JAW | TENT |
| Table 2 |
| Reply Code (SF01) | Reply |
| NYC000 | NYLON, COATED |
ASWC*DMATERIAL FORM
THE FORM OR STRUCTURE OF THE MATERIAL OF WHICH AN ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ASWC3BGKDACE*;ASWC3BGKDACE$DACE*;ASWC3BGKDACE$$DACE*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BGK | FLOOR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AL59) | Reply |
| ACE | FABRIC |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information