A range with an integrated electrical heating device to cook.

FSC Information

7310	Food Cooking, Baking, and Serving Equipment

Colloquial Information

G2075

STOVE,ELECTRIC

Change List

Reply NA added to MRC AEKM.

Reply XA deleted from MRC AEKM.

MRC AFHS has been deleted

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED10856*)

MATTDMATERIAL

THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(MATT3AVMDSTB000*;MATT3AVMDSTB000$DSTB000*;MATT3AVMDSTB000$$DSTB000*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AEE	OVERALL
	3AVM	EXTERIOR
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (MA01)	Reply
	STB000	STEEL CORROSION RESISTING

ALBYDUSAGE DESIGN

INDICATES THE DESIGNED USE OF THE ITEM.

Enter the applicable reply code from the table below

(ALBYDAAH*;ALBYDAAE$DAAD*;ALBYDAAE$$DAAD*)

Table 1
	Reply Code (AH21)	Reply
	AAE	COMMERCIAL
	AAD	DOMESTIC
	AAH	GENERAL
	AAF	MARINE

ABGLJWIDTH

A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABGLJAC2.0*;ABGLJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

Reference Notes

Refer to Reference Drawings for assitance in answering this MRC.

AEJZJDEPTH

A LINEAR MEASUREMENT FROM THE SURFACE TO A SPECIFIED INNER POINT ON AN ITEM,IN DISTINCTION FROM HEIGHT.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AEJZJAB2.0*;AEJZJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

Reference Notes

Refer to Reference Drawings for assitance in answering this MRC.

AEKAJCOOKING TOP HEIGHT

A MEASUREMENT FROM THE BOTTOM TO THE TOP OF THE COOKING TOP, IN DISTINCTION FROM DEPTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AEKAJAA2.0*;AEKAJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

Reference Notes

Refer to Reference Drawings for assitance in answering this MRC.

AEKB*JOVEN HEIGHT

A MEASUREMENT FROM THE BOTTOM TO THE TOP OF THE OVEN, IN DISTINCTION FROM DEPTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AEKBJAB2.0*;AEKBJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

Reference Notes

Refer to Reference Drawings for assitance in answering this MRC.

AEKC*JOVEN WIDTH

A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE OVEN, IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AEKCJAA2.0*;AEKCJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

Reference Notes

Refer to Reference Drawings for assitance in answering this MRC.

AEKD*JOVEN DEPTH

A LINEAR MEASUREMENT FROM THE SURFACE TO A SPECIFIED INNER POINT OF THE OVEN, IN DISTINCTION FROM HEIGHT.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AEKDJAC2.0*;AEKDJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

Reference Notes

Refer to Reference Drawings for assitance in answering this MRC.

HGTHJHEIGHT

A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN OBJECT,IN DISTINCTION FROM DEPTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(HGTHJAC2.0*;HGTHJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

Reference Notes

Refer to Reference Drawings for assitance in answering this MRC.

ABFFDFURNISHED ITEMS

ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.

Enter the applicable reply code from the table below

(ABFFDFY*;ABFFDRF$$DAAW*)

Table 1
	Reply Code (AB28)	Reply
	FY	APPLIANCE OUTLET
	FW	BACK SHELF
	RE	BACK SPLASH LIGHT
	GA	GUARD RAIL
	RF	INDICATING LIGHT
	FX	INTERVAL TIMER
	AAW	OVEN DOOR WINDOW
	RG	OVEN LIGHT
	GB	SEA RACKS
	GC	STORAGE COMPARTMENT
	FZ	TIME CONTROLLED APPLIANCE OUTLET

ACDCDCURRENT TYPE

INDICATES THE TYPE OF CURRENT WHETHER ALTERNATING,DIRECT,OR BOTH.

Enter the applicable reply code from the table below

(ACDCDB)

Table 1
	Reply Code (AB62)	Reply
	B	AC
	D	AC/DC
	C	DC

ELECBVOLTAGE IN VOLTS

THE TOTAL ELECTRICAL VOLTAGE.

Enter a reply with a minimum of one digit on either side of the decimal point.

(ELECB2.0*;ELECB2.0$$BM2.0*)

FREQ*BFREQUENCY IN HERTZ

THE CYCLES PER SECOND /HERTZ/ OF THE ALTERNATING CURRENT.

Enter a reply with a minimum of one digit on either side of the decimal point.

(FREQB2.0*;FREQB2.0$$BM2.0*)

FAAZ*DPHASE

THE NUMBER OF ALTERNATING CURRENT PHASES.

Enter the applicable reply code from the table below

(FAAZDA*;FAAZDC$$DB*)

Table 1
	Reply Code (AD02)	Reply
	A	SINGLE
	C	THREE
	B	TWO

ASDKJWATTAGE RATING IN WATTS

THE RATED POWER THAT AN ITEM CAN SAFELY CONSUME OR PROVIDE,MEASURED IN WATTS.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ASDKJB2.0*)

Table 1
	Reply Code (AC20)	Reply
	B	MINIMUM
	C	MAXIMUM

AEKFAOVEN QUANTITY

THE NUMBER OF OVENS PROVIDED.

Enter the numeric reply with a minimum of one digit.

(AEKFA10*)

CTZC*JOVEN HEATING ELEMENT POWER DISSIPATION RATING IN WATTS

THE AMOUNT OF ELECTRICAL ENERGY THAT CAN BE EXPENDED BY THE OVEN HEATING ELEMENT(S),EXPRESSED IN WATTS.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CTZCJB2.0*;CTZCJB2.0$$JB2.1*)

Table 1
	Reply Code (AC20)	Reply
	B	MINIMUM
	C	MAXIMUM

CBBL*DFEATURES PROVIDED

THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.

Enter the applicable reply code from the table below

(CBBLDFFF*;CBBLDFFH$$DFFG*)

Table 1
	Reply Code (AN47)	Reply
	FEY	BUILT-INS
	FEX	FREE STANDING
	FFH	GAS PRESSURE REGULATOR
	FFC	KEEP WARM CONTROL
	FEZ	NONMAGNETIC CONSTRUCTION MATERIAL
	FFB	OVEN TEMPERATURE CONTROL
	FFA	SIMULTANEOUS AC AND DC OPERATION
	FFE	SURFACE HEATING UNIT CONTROL
	FFD	TIME CONTROLLED OVEN
	FFF	WARMING OVEN
	FFG	WARMING OVEN TEMP CONTROL

AEKLDSURFACE HEATING UNIT TYPE

INDICATES THE TYPE OF HEATING UNIT(S) PROVIDED ON THE SURFACE.

Enter the applicable reply code from the table below

(AEKLDAD*;AEKLDAE$$DAG*)

Table 1
	Reply Code (AB04)	Reply
	AG	COILED
	AA	COMBINATION GRIDDLE-HOT TOP
	AN	COVERED BURNER
	AB	DEEP WELL COOKER
	AC	GRIDDLE
	AD	HOT TOP, RECTANGULAR
	AE	HOT TOP, RING AND LID
	AF	OPEN BURNER

Reference Notes

Refer to Reference Drawings for assitance in answering this MRC.

AEKMASURFACE HEATING UNIT QUANTITY

THE NUMBER OF SURFACE HEATING UNITS PROVIDED.

Enter the numeric reply with a minimum of one digit.

(AEKMA10*)

CTZN*JSURFACE HEATING UNIT POWER DISSIPATION RATING IN WATTS

THE AMOUNT OF ELECTRICAL ENERGY THAT CAN BE EXPENDED BY THE SURFACE HEATING ELEMENT(S),EXPRESSED IN WATTS.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CTZNJB2.0*;CTZNJB2.0$$JB2.1*)

Table 1
	Reply Code (AC20)	Reply
	B	MINIMUM
	C	MAXIMUM

AEKU*DBROILER TYPE

THE BASIC DESIGN OF THE BROILER/S/.

Enter the applicable reply code from the table below

(AEKUDC*;AEKUDB$$DC*)

Table 1
	Reply Code (AD15)	Reply
	B	BACK SHELF
	C	INTEGRAL

AEKV*ABROILER QUANTITY

THE NUMBER OF BROILERS PROVIDED.

Enter the numeric reply with a minimum of one digit.

(AEKVA10*)

AEKW*DBROILER TEMP CONTROL METHOD

THE MEANS EMPLOYED TO CONTROL THE TEMPERATURE OF THE BROILER HEATING ELEMENT.

Enter the applicable reply code from the table below

(AEKWDC*;AEKWDB$$DC*)

Table 1
	Reply Code (AD16)	Reply
	B	INDEPENDENTLY CONTROLLED
	C	OVEN CONTROLLED

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH