An assembly of fiber rope with or without terminal attachments in a continuous run from end to end. (If without attachments, one end must terminate in a loop.) It may contain intermediate and/or end attachments such as sliding or fixed ring(s) or hook(s).
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED09766*)
BZRCASTRAND QUANTITY
THE NUMBER OF STRANDS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BZRCA10*)
HUESDCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDMS0242*;HUESDRG0050$DBR0000*;HUESDRG0050$$DBR0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| MS0242 | AMERICAN BEAUTY |
| MS0243 | AMERICAN BEAUTY, COLOR ASSN OF THE US, 70052 |
| A | ANY ACCEPTABLE |
| MS0008 | AQUA |
| AV0000 | AVOCADO |
| MS0010 | BEAVER |
| MS0244 | BEAVER, COLOR ASSN OF THE US, 70106 |
| BE0000 | BEIGE |
| MS0011 | BISQUE |
| BL0000 | BLACK |
| BL0182 | BLACK, COLOR ASSN OF THE US, 37030 |
| BL0043 | BLACK, COLOR ASSN OF THE US, 65018 |
| BL0048 | BLACK, COLOR ASSN OF THE US, 66043 |
| BU0000 | BLUE |
| BU0054 | BLUE STEEL |
| BU0009 | BLUE, ALICE |
| BU0106 | BLUE, BABY |
| BU0016 | BLUE, CHINA |
| BU0017 | BLUE, COBALT |
| BU0133 | BLUE, COLOR ASSN OF THE US, 66027 |
| BU0134 | BLUE, COLOR ASSN OF THE US, 66028 |
| BU0376 | BLUE, COLOR ASSN OF THE US, 66045 |
| BU0377 | BLUE, COLOR ASSN OF THE US, 66060 |
| BU0342 | BLUE, COLOR ASSN OF THE US, 70012 |
| BU0285 | BLUE, COLOR ASSN OF THE US, 70087 |
| BU0135 | BLUE, COLOR ASSN OF THE US, 70112 |
| BU0322 | BLUE, COLOR ASSN OF THE US, 70209 |
| BU0324 | BLUE, COLOR ASSN OF THE US, 70211 |
| BU0005 | BLUE, DARK |
| BU0109 | BLUE, DARK, NAVY |
| BU0020 | BLUE, DELFT |
| BU0157 | BLUE, FRENCH |
| BU0406 | BLUE, GRAY, COLOR ASSN OF THE US, 66057 |
| BU0026 | BLUE, LIGHT |
| BU0108 | BLUE, LIGHT, DELFT |
| BU0110 | BLUE, LIGHT, NAVY |
| BU0028 | BLUE, MANDARIN |
| BU0029 | BLUE, MEDIUM |
| BU0032 | BLUE, NATIONAL FLAG |
| BU0115 | BLUE, NATIONAL FLAG, COLOR ASSN OF THE US, 70077 |
| BU0033 | BLUE, NAVY |
| BU0034 | BLUE, OLD GLORY |
| BU0116 | BLUE, OLD GLORY, COLOR ASSN OF THE US, 70075 |
| BU0035 | BLUE, OPAL |
| BU0037 | BLUE, ORIENTAL |
| BU0042 | BLUE, ROYAL |
| BU0043 | BLUE, SAPPHIRE |
| BU0111 | BLUE, SKIPPER |
| BU0048 | BLUE, SLATE |
| BU0049 | BLUE, TEAL |
| BU0136 | BLUE, TEAL, COLOR ASSN OF THE US, 65024 |
| BU0052 | BLUE, YALE |
| BR0000 | BROWN |
| BR0005 | BROWN, AFRICAN |
| BR0056 | BROWN, AFRICAN, COLOR ASSN OF THE US, 70096 |
| BR0007 | BROWN, AUTUMN |
| BR0055 | BROWN, COLOR ASSN OF THE US, 66069 |
| BR0118 | BROWN, COLOR ASSN OF THE US, 70141 |
| BR0010 | BROWN, DARK |
| BR0013 | BROWN, GOLDEN |
| BR0003 | BROWN, LIGHT |
| BR0004 | BROWN, MEDIUM |
| BR0019 | BROWN, RUST |
| BR0021 | BROWN, SEAL |
| BR0057 | BROWN, SEAL, COLOR ASSN OF THE US, 66054 |
| BR0022 | BROWN, WALNUT |
| MS0013 | BUFF |
| MS0089 | BUFF, HEATHER |
| RE0047 | CARMINE |
| MS0015 | CHARCOAL |
| GR0044 | CHARTREUSE |
| PK0008 | CORAL |
| MS0090 | CORAL, BERMUDA |
| CR0000 | CREAM |
| MS0021 | ECRU |
| MS0331 | ECRU, FED STD 595, 13690 |
| GR0003 | EMERALD |
| RE0040 | FLAME |
| MS0092 | FOXGLOVE |
| MS0024 | GARNET |
| GL0000 | GOLD |
| GL0028 | GOLD, SHADE 105801 |
| YE0016 | GOLDENROD |
| GY0004 | GRAY, AIRCRAFT |
| GY0007 | GRAY, CHARCOAL |
| GY0008 | GRAY, DARK |
| GY0097 | GRAY, DARK, FED STD 595, 36231 |
| GY0028 | GRAY, FED STD 595, 16473 |
| GY0002 | GRAY, LIGHT |
| GY0098 | GRAY, LIGHT, FED STD 595, 36440 |
| GY0037 | GRAY, MALTESE |
| GY0014 | GRAY, MEDIUM |
| GY0224 | GRAY, MEDIUM, COLOR ASSN OF THE US, 66062 |
| GY0099 | GRAY, MEDIUM, FED STD 595, 36231 |
| GY0072 | GRAY, NAVY |
| GY0017 | GRAY, PEARL |
| GY0019 | GRAY, SILVER |
| GY0021 | GRAY, STEEL |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0321 | GREEN, CAMOUFLAGE |
| GR0487 | GREEN, CAMOUFLAGE, US ARMY, 483 |
| GR0086 | GREEN, CHRISTMAS |
| GR0310 | GREEN, COLOR ASSN OF THE US, 11633 |
| GR0134 | GREEN, COLOR ASSN OF THE US, 66034 |
| GR0457 | GREEN, COLOR ASSN OF THE US, 66078 |
| GR0294 | GREEN, COLOR ASSN OF THE US, 70064 |
| GR0311 | GREEN, COLOR ASSN OF THE US, 70166 |
| GR0020 | GREEN, DARK |
| GR0021 | GREEN, EMERALD |
| GR0009 | GREEN, FED STD 595, 14036 |
| GR0458 | GREEN, FED STD 595, 14158 |
| GR0477 | GREEN, FED STD 595, 24084 |
| GR0024 | GREEN, FOREST |
| GR0025 | GREEN, GOLF |
| GR0083 | GREEN, GRASS |
| GR0026 | GREEN, GRAY |
| GR0133 | GREEN, GRAY, COLOR ASSN OF THE US, 66055 |
| GR0027 | GREEN, HUNTER |
| GR0028 | GREEN, IRISH |
| GR0098 | GREEN, IRISH, COLOR ASSN OF THE US, 70168 |
| GR0030 | GREEN, KELLY |
| GR0031 | GREEN, LEAF |
| GR0032 | GREEN, LIGHT |
| GR0006 | GREEN, MEDIUM |
| GR0087 | GREEN, MEDIUM LEAF |
| GR0033 | GREEN, MOSSTONE |
| GR0135 | GREEN, MOSSTONE, COLOR ASSN OF THE US, 65022 |
| GR0136 | GREEN, MYRTLE |
| GR0034 | GREEN, NILE |
| GR0011 | GREEN, OLIVE |
| GR0063 | GREEN, OLIVE, 107 |
| GR0007 | GREEN, SAGE |
| GR0138 | GREEN, SAGE, COLOR ASSN OF THE US, 66046 |
| GR0038 | GREEN, SEA |
| GR0039 | GREEN, SPRING |
| GR0305 | GREEN, US AIR FORCE, 1565 |
| KH0000 | KHAKI |
| KH0003 | KHAKI, COLOR ASSN OF THE US, 66019 |
| MS0031 | LAVENDER |
| YE0017 | LEMON, LIGHT |
| MS0033 | LILAC |
| GR0047 | LIME |
| MS0034 | MAGENTA |
| MS0035 | MAHOGANY |
| MS0231 | MAIZE |
| MA0000 | MAROON |
| MA0005 | MAROON, COLOR ASSN OF THE US, 66052 |
| NA0000 | NATURAL |
| MS0038 | NICKEL |
| MS0039 | NUTMEG |
| LD0008 | OLIVE |
| LD0000 | OLIVE DRAB |
| LD0024 | OLIVE DRAB, COLOR ASSN OF THE US, 66020 |
| LD0025 | OLIVE DRAB, COLOR ASSN OF THE US, 66021 |
| LD0029 | OLIVE DRAB, COLOR ASSN OF THE US, 66022 |
| LD0030 | OLIVE DRAB, COLOR ASSN OF THE US, 66023 |
| LD0051 | OLIVE DRAB, FED STD 595, 24084 |
| LD0022 | OLIVE DRAB, LIGHT |
| LD0023 | OLIVE DRAB, LIGHT, COLOR ASSN OF THE US, 70184 |
| LD0027 | OLIVE DRAB, US ARMY, 22-OBSOLETE |
| LD0028 | OLIVE DRAB, US ARMY, 613 |
| LD0012 | OLIVE DRAB, US ARMY, 7 |
| RG0000 | ORANGE |
| RG0033 | ORANGE, BURNT |
| RG0073 | ORANGE, COLOR ASSN OF THE US, 66074 |
| RG0050 | ORANGE, COLOR ASSN OF THE US, 70070 |
| RG0007 | ORANGE, GOLDEN |
| RG0008 | ORANGE, INDIAN |
| RG0009 | ORANGE, INTERNATIONAL |
| RG0001 | ORANGE-RED |
| PK0000 | PINK |
| PK0003 | PINK, ANGEL |
| PK0016 | PINK, BABY |
| PK0009 | PINK, DARK |
| PK0011 | PINK, DEEP |
| PK0013 | PINK, ROSE |
| PU0000 | PURPLE |
| RE0000 | RED |
| RE0087 | RED, AMERICAN BEAUTY |
| RE0009 | RED, BRIGHT |
| RE0011 | RED, CARDINAL |
| RE0103 | RED, COLOR ASSN OF THE US, 66073 |
| RE0204 | RED, COLOR ASSN OF THE US, 70052 |
| RE0199 | RED, COLOR ASSN OF THE US, 70179 |
| RE0035 | RED, DARK |
| RE0068 | RED, FED STD 595, 11105 |
| RE0121 | RED, FED STD 595, 21136 |
| RE0083 | RED, JOCKEY |
| RE0014 | RED, MEDIUM |
| RE0015 | RED, OLD GLORY |
| RE0091 | RED, OLD GLORY, COLOR ASSN OF THE US, 70180 |
| RE0006 | ROSE |
| RE0007 | ROSE, AMERICAN BEAUTY |
| RE0036 | ROSE, DARK |
| RE0037 | ROSE, DEEP |
| RE0038 | ROSE, DUSTY |
| RE0041 | ROSE, HENNA |
| RE0102 | ROSE, HENNA, GLENN L. MARTIN, C1084 |
| RE0084 | ROSE, JUNE |
| RE0043 | ROSE, LIGHT |
| RE0016 | ROSE, OLD |
| RE0021 | ROSE, SALMON |
| RE0025 | ROSE, WILD |
| RE0019 | ROSEBUD |
| RU0000 | RUSSET |
| RU0002 | RUSSET, COLOR ASSN OF THE US, 66025 |
| RE0033 | RUST |
| RE0044 | RUST, LIGHT |
| RE0030 | RUST, MEDIUM |
| MS0049 | SAND |
| RE0022 | SCARLET |
| RE0071 | SCARLET, COLOR ASSN OF THE US, 65006 |
| RE0104 | SCARLET, COLOR ASSN OF THE US, 66040 |
| MS0052 | SLATE |
| TA0000 | TAN |
| TA0017 | TAN, COLOR ASSN OF THE US, 66041 |
| TA0018 | TAN, COLOR ASSN OF THE US, 66047 |
| TA0027 | TAN, COLOR ASSN OF THE US, 70128 |
| TA0003 | TAN, LIGHT |
| TA0016 | TAN, US AIR FORCE, 1505 |
| TA0092 | TAN, US ARMY, 459 |
| MS0054 | TAUPE |
| MS0378 | TAUPE, COLOR ASSN OF THE US, 66032 |
| MS0095 | TAUPE, LIGHT |
| TR0000 | TURQUOISE |
| TR0006 | TURQUOISE, LIGHT |
| TR0007 | TURQUOISE, MEDIUM |
| VL0000 | VIOLET |
| VL0009 | VIOLET, LIGHT |
| WA0000 | WALNUT |
| WH0000 | WHITE |
| WH0055 | WHITE, COLOR ASSN OF THE US, 66050 |
| WH0029 | WHITE, COLOR ASSN OF THE US, 70001 |
| WH0023 | WHITE, NATURAL |
| WH0054 | WHITE, NATURAL, COLOR ASSN OF THE US, 66049 |
| WH0040 | WHITE, PLATINUM |
| RE0026 | WINE |
| YE0000 | YELLOW |
| YE0051 | YELLOW, BABY |
| YE0052 | YELLOW, BRIGHT |
| YE0066 | YELLOW, COLOR ASSN OF THE US, 66059 |
| YE0012 | YELLOW, DARK |
| YE0036 | YELLOW, FED STD 595, 13538 |
| YE0019 | YELLOW, LEMON |
| YE0065 | YELLOW, LEMON, COLOR ASSN OF THE US, 70205 |
| YE0018 | YELLOW, LIGHT |
| YE0009 | YELLOW, PALE |
| YE0011 | YELLOW, SPANISH |
| YE0063 | YELLOW, SPANISH, COLOR ASSN OF THE US, 70068 |
IF YOU ANSWER MRC HDCL, YOU MUST ANSWER MRC (HUES)
HDCL*JCOLOR DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,MANUFACTURERS REFERENCE,OR INDEX SYSTEM AND THE CLASIFICATION DESIGNATION, USED TO IDENTIFY COLOR, COLOR SELECTION, COLOR MATCHING AND QUALITY CONTROL OF A SPECIFIC COLOR.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(HDCLJEATEXT1234*;HDCLJEATEXT1234$$JEATEXT1234*;HDCLJEATEXT1234$JEATEXT1234*;HDCL1BJEATEXT1234*;HDCL1BJEATEXT1234$$JEATEXT1234*;HDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP93) | Reply |
| M | 10TH COLOR RESPONSE |
| N | 11TH COLOR RESPONSE |
| P | 12TH COLOR RESPONSE |
| Q | 13TH COLOR RESPONSE |
| R | 14TH COLOR RESPONSE |
| S | 15TH COLOR RESPONSE |
| T | 16TH COLOR RESPONSE |
| U | 17TH COLOR RESPONSE |
| W | 18TH COLOR RESPONSE |
| X | 19TH COLOR RESPONSE |
| B | 1ST COLOR RESPONSE |
| Y | 20TH COLOR RESPONSE |
| Z | 21ST COLOR RESPONSE |
| V | 22ND COLOR RESPONSE |
| C | 2ND COLOR RESPONSE |
| D | 3RD COLOR RESPONSE |
| E | 4TH COLOR RESPONSE |
| F | 5TH COLOR RESPONSE |
| H | 6TH COLOR RESPONSE |
| J | 7TH COLOR RESPONSE |
| K | 8TH COLOR RESPONSE |
| L | 9TH COLOR RESPONSE |
| G | ALL COLOR RESPONSE |
| A | SINGLE COLOR RESPONSE |
IF STYLE/REPLY CODE(s) 36 WERE ENTERED FOR MRC AMXF, YOU MUST ANSWER MRC (AARX and AGCW and AJRE)
IF STYLE/REPLY CODE(s) 35 OR 37 WERE ENTERED FOR MRC AMXF, YOU MUST ANSWER MRC (AARX and AGCW)
IF STYLE/REPLY CODE(s) 17 WERE ENTERED FOR MRC AMXF, YOU MUST ANSWER MRC (ABHP and BRYZ)
IF STYLE/REPLY CODE(s) 20 OR 21 WERE ENTERED FOR MRC AMXF, YOU MUST ANSWER MRC (ABHP)
IF STYLE/REPLY CODE(s) 55 WERE ENTERED FOR MRC AMXF, YOU MUST ANSWER MRC (ABVV and ACVU and ADJT and AJRE and AJRP)
IF STYLE/REPLY CODE(s) 45, 62 OR 63 WERE ENTERED FOR MRC AMXF, YOU MUST ANSWER MRC (ABVV and ACVU and AJRE and AJRP)
IF STYLE/REPLY CODE(s) 68 WERE ENTERED FOR MRC AMXF, YOU MUST ANSWER MRC (ABVV and ACVU and AJRE)
IF STYLE/REPLY CODE(s) 47 WERE ENTERED FOR MRC AMXF, YOU MUST ANSWER MRC (ACVU and ADJU and AHNS and AJRP)
IF STYLE/REPLY CODE(s) 46, 48, 49, 50, 51, 52, 54, 56, 57, 58, 59, 60, 61, 64, 65 OR 66 WERE ENTERED FOR MRC AMXF, YOU MUST ANSWER MRC (ACVU and ADJU and AJRP)
IF STYLE/REPLY CODE(s) 53 WERE ENTERED FOR MRC AMXF, YOU MUST ANSWER MRC (ACVU and ADJU)
IF STYLE/REPLY CODE(s) 67 WERE ENTERED FOR MRC AMXF, YOU MUST ANSWER MRC (AARX and ACVU and AHNS and CTZR)
IF STYLE/REPLY CODE(s) 7, 8, 9, 10, 11, 12, 13, 14, 15 OR 16 WERE ENTERED FOR MRC AMXF, YOU MUST ANSWER MRC (AGCW and AHMS and AHMT and AJRE)
IF STYLE/REPLY CODE(s) 1, 2, 3, 4, 5, 6, 18, 19, 22 OR 24 WERE ENTERED FOR MRC AMXF, YOU MUST ANSWER MRC (AJRE)
IF STYLE/REPLY CODE(s) 25 WERE ENTERED FOR MRC AMXF, YOU MUST ANSWER MRC (BRYZ)
AMXFLATTACHMENT STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ATTACHMENT.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(AMXF3DMYL15*;AMXF3DMYL15$L6*;AMXF3DMYL15$$L6*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3BDO | RING |
| 3DMY | ALL ATTACHMENTS |
| 3DNA | FIRST INTERMEDIATE ATTACHMENT |
| 3DNS | SECOND TERMINAL ATTACHMENT FIRST END |
| 3DNY | ROPE |
| 3DNZ | THIMBLE |
| 3DOA | FIRST TERMINAL ATTACHMENT FIRST END |
| 3DOB | FIRST TERMINAL ATTACHMENT SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAE1410 | 1 | CHOKER HOOK |
| AAE1419 | 10 | S HOOK |
| AAE1420 | 11 | S HOOK |
| AAE1421 | 12 | S HOOK |
| AAE1422 | 13 | S HOOK |
| AAE1423 | 14 | S HOOK |
| AAE1424 | 15 | S HOOK |
| AAE1425 | 16 | S HOOK |
| AAE1426 | 17 | SHANK HOOK |
| AAE1427 | 18 | SLIP HOOK |
| AAE1428 | 19 | SHIP HOOK, REVERSE EYE |
| AAE1411 | 2 | CHOKER HOOK |
| AAE1429 | 20 | SNAP HOOK |
| AAE1430 | 21 | SNAP HOOK |
| AAE1431 | 22 | SNAP CHOKER |
| AAE1432 | 24 | TWIN HOOKS |
| AAE1434 | 25 | TENT LINE HOOK |
| AAE1435 | 26 | CONE SPRING HOOK |
| AAE1412 | 3 | GRAB HOOK |
| AAE1436 | 35 | RING |
| AAE1437 | 36 | SNAP RING |
| AAE1438 | 37 | SPLIT RING |
| AAE1413 | 4 | GRAB HOOK, REVERSE EYE |
| AAE1439 | 45 | ANCHOR SHACKLE |
| AAE1440 | 46 | ANCHOR SHACKLE |
| AAE1441 | 47 | ANCHOR SHACKLE |
| AAE1442 | 48 | ANTITOPPLING SHACKLE |
| AAE1443 | 49 | ANTITOPPLING SHACKLE |
| AAE1414 | 5 | HOIST HOOK |
| AAE1444 | 50 | ANTITOPPLING SHACKLE |
| AAE1445 | 51 | ANTITOPPLING SHACKLE |
| AAE1446 | 52 | BAIL SHACKLE |
| AAE1447 | 53 | BENDING SHACKLE |
| AAE1448 | 54 | BENDING SHACKLE |
| AAE1449 | 55 | CHAIN SHACKLE |
| AAE1450 | 56 | CHAIN SHACKLE |
| AAE1451 | 57 | HEART SHACKLE |
| AAE1452 | 58 | HEART SHACKLE |
| AAE1453 | 59 | LEFT TWIST SHACKLE |
| AAE1415 | 6 | ROUND HOOK, REVERSE EYE |
| AAE1454 | 60 | MOORING BUOY SHACKLE |
| AAE1455 | 61 | RIGHT TWIST SHACKLE |
| AAE1456 | 62 | SCREW PIN ANCHOR SHACKLE |
| AAE1457 | 63 | SCREW PIN CHAIN SHACKLE |
| AAE1458 | 64 | SINKER SHACKLE |
| AAE1459 | 65 | STIRRUP SHACKLE |
| AAE1460 | 66 | TRIANGLE SHACKLE |
| AAE1461 | 67 | WIRE ROPE SHACKLE |
| AAE1462 | 68 | ANCHOR SHACKLE W/ HEX BOLT AND NUT |
| AAE1416 | 7 | S HOOK |
| AAE1417 | 8 | S HOOK |
| AAE1418 | 9 | S HOOK |
IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC AJXF, YOU MUST ANSWER MRC (BWCM and BWCN and BWCP and ABRY)
IF STYLE/REPLY CODE(s) 2 WERE ENTERED FOR MRC AJXF, YOU MUST ANSWER MRC (AJYH and BWCM and BWCQ and ABRY)
IF STYLE/REPLY CODE(s) 3 WERE ENTERED FOR MRC AJXF, YOU MUST ANSWER MRC (AJYE and AJYH and BWCM and ABRY)
IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC AJXF, YOU MUST ANSWER MRC (AJYE and BWCM and BWCQ and ABRY)
IF STYLE/REPLY CODE(s) 5 WERE ENTERED FOR MRC AJXF, YOU MUST ANSWER MRC (AJYE and BWCM and ABRY)
IF STYLE/REPLY CODE(s) 6 WERE ENTERED FOR MRC AJXF, YOU MUST ANSWER MRC (AJYH and ABRY)
AJXFLROPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ROPE.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AJXFL3)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAE1404 | 1 | DOUBLE LOOP |
| AAE1405 | 2 | LOOP AND PLAIN END |
| AAE1406 | 3 | THIMBLE AND PLAIN END |
| AAE1407 | 4 | THIMBLE AND LOOP |
| AAE1408 | 5 | DOUBLE THIMBLE |
| AAE1409 | 6 | PLAIN ENDS |
BWCQ*JINNER PERIMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BWCQJFA2.0*;BWCQJFA2.0$$JFA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BWCN*JFIRST INNER PERIMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BWCNJFA2.0*;BWCNJFA2.0$$JFA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BWCP*JSECOND INNER PERIMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BWCPJFC2.0*;BWCPJFC2.0$$JFC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BWCM*DLOOP RETENTION METHOD
THE MEANS USED FOR RETAINING A LOOP.
Enter the applicable reply code from the table below
(BWCMDBFN*;BWCMDAFL$$DBEL*)
| Table 1 |
| Reply Code (AM39) | Reply |
| ABH | CLAMP |
| AFL | CLIP |
| BFN | KNOTTED |
| BFP | SEWED |
| BEK | SPLICE |
| BEL | SPLICED/SERVED |
AJYH*DROPE END CONDITIONING METHOD
THE MEANS USED TO PREVENT UNRAVELING OF THE ROPE ENDS.
Enter the applicable reply code from the table below
(AJYHDJB*;AJYHDJA$$DRA*)
| Table 1 |
| Reply Code (AA62) | Reply |
| A | ANY ACCEPTABLE |
| HF | BACK SPLICED |
| HZ | CLAMPED |
| HH | HEAT SEALED |
| JA | KNOTTED |
| LF | LAQUERED |
| RA | RUBBER COATED |
| HK | SERVED |
| JB | SEWED |
IF STYLE/REPLY CODE(s) 1 OR 2 WERE ENTERED FOR MRC AJYE, YOU MUST ANSWER MRC (AARX and ABKV)
IF STYLE/REPLY CODE(s) 3, 4, 5, 6, 7, 8 OR 9 WERE ENTERED FOR MRC AJYE, YOU MUST ANSWER MRC (CQGS and CQTC)
IF STYLE/REPLY CODE(s) 10, 11, 15, 16, 17, 18 OR 19 WERE ENTERED FOR MRC AJYE, YOU MUST ANSWER MRC (CQGS and CQTC)
IF STYLE/REPLY CODE(s) 12, 13 OR 14 WERE ENTERED FOR MRC AJYE, YOU MUST ANSWER MRC (ACXJ and ACXU)
AJYE*LTHIMBLE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE THIMBLE.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AJYEL11*;AJYEL4$$L8*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAE1463 | 1 | ROUND |
| AAE1472 | 10 | OVAL W/LUGS |
| AAE1473 | 11 | OVAL W/LUGS AND COVER PLATES |
| AAE1474 | 12 | SOLID |
| AAE1475 | 13 | SOLID |
| AAE1476 | 14 | SOLID |
| AAE1477 | 15 | EQUALIZING |
| AAE1478 | 16 | EQUALIZING |
| AAE1479 | 17 | CRESCENT W/LINK |
| AAE1480 | 18 | CRESCENT |
| AAE1481 | 19 | SPLIT OVAL |
| AAE1464 | 2 | SPLIT ROUND |
| AAE1465 | 3 | SPLIT OVAL |
| AAE1466 | 4 | SPLIT OVAL |
| AAE1467 | 5 | SPLIT OVAL |
| AAE1468 | 6 | OVAL |
| AAE1469 | 7 | OVAL |
| AAE1470 | 8 | OVAL |
| AAE1471 | 9 | REINFORCED OVAL |
BWCD*ACORE YARN QUANTITY
THE NUMBER OF YARNS UTILIZED TO MAKE UP THE CORE.
Enter the alpha-numeric reply with a minimum of one character.
(BWCDAQ8)
BWSQ*JCIRCUMFERENCE
THE DISTANCE AROUND THE OUTSIDE OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BWSQJAB2.0*;BWSQJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJXN*JBREAKING STRENGTH
THE MEASURED LOAD REQUIRED TO BREAK THE ITEM IN TENSION.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJXNJKLC2.0*;AJXNJKLC2.0$$JKLC2.1*)
| Table 1 |
| Reply Code (AB16) | Reply |
| DN | DECANEWTONS |
| KL | KILOGRAMS |
| NT | NEWTONS |
| LB | POUNDS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AARN*DFABRICATION METHOD
THE PROCESS USED IN MANUFACTURING THE ITEM.
Enter the applicable reply code from the table below
(AARNDHY*;AARNDAY$DAW*)
| Table 1 |
| Reply Code (AA62) | Reply |
| AB | BRAIDED |
| HY | CABLE LAID |
| FT | PLAITED |
| AY | TWISTED |
| AW | WOVEN |
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable reply code from the table below
(ADZCDAEM*;ADZCDALA$$DABY*)
| Table 1 |
| Reply Code (AA65) | Reply |
| ABY | ACID RESISTANT |
| AGC | FIRE RETARDANT |
| AAP | HEAT RESISTANT |
| ALA | HIGH TEMPERATURE RESISTANT |
| AEM | LIGHT RESISTANT |
| ACC | MILDEW RESISTANT |
| ACH | WATER REPELLENT |
| ACM | WATER RESISTANT |
| ABN | WEATHER RESISTANT |
CXKJ*DIMPREGNATION MATERIAL
THE ELEMENT,COMPOUND,OR MIXTURE WITH WHICH THE ITEM IS SATURATED.
Enter the applicable reply code from the table below
(CXKJDEE*;CXKJDEE$DEE*;CXKJDEE$$DEE*)
| Table 1 |
| Reply Code (AG62) | Reply |
| EE | COAL TAR |
BWCK*JLENGTH PER TEN TURNS
A MEASUREMENT OF THE LONGEST DIMENSION OF TEN TURNS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BWCKJAA2.0*;BWCKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKV*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKVJAA2.0*;ABKVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ACXJ*JOVERALL WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACXJJAA2.0*;ACXJJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ACXU*JPINHOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A PINHOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACXUJAA2.0*;ACXUJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CQGS*JTHIMBLE INSIDE WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQGSJAA2.0*;CQGSJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CQTC*JTHIMBLE INSIDE LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQTCJAB2.0*;CQTCJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AARX*JINSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AARXJAA2.0*;AARXJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AEEDPNA000*;SFTT3AEEDPNA000$DPSA000*;SFTT3AEEDPNA000$$DPSA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DMY | ALL ATTACHMENTS |
| 3DNC | THIRD INTERMEDIATE ATTACHMENT |
| 3DNZ | THIMBLE |
| 3DOA | FIRST TERMINAL ATTACHMENT FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| CDA000 | CADMIUM |
| CMB000 | CHROMATE ZINC |
| ENB000 | ENAMEL LUSTERLESS |
| PNA000 | PAINT |
| PSA000 | PASSIVATE |
| ZNA000 | ZINC |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3DMYDPCX002*;MATT3DMYDPCX002$DAAA013*;MATT3DMYDPCX002$$DAAA013*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ACN | CORE |
| 3AEE | OVERALL |
| 3BAE | SOCKET |
| 3BDO | RING |
| 3CIL | COATING |
| 3CIM | IMPREGNATION |
| 3DMY | ALL ATTACHMENTS |
| 3DNA | FIRST INTERMEDIATE ATTACHMENT |
| 3DNB | SECOND INTERMEDIATE ATTACHMENT |
| 3DNC | THIRD INTERMEDIATE ATTACHMENT |
| 3DND | FOURTH INTERMEDIATE ATTACHMENT |
| 3DNE | FIFTH INTERMEDIATE ATTACHMENT |
| 3DNS | SECOND TERMINAL ATTACHMENT FIRST END |
| 3DNT | THIRD TERMINAL ATTACHMENT FIRST END |
| 3DNU | FOURTH TERMINAL ATTACHMENT FIRST END |
| 3DNV | SECOND TERMINAL ATTACHMENT SECOND END |
| 3DNW | THIRD TERMINAL ATTACHMENT SECOND END |
| 3DNX | FOURTH TERMINAL ATTACHMENT SECOND END |
| 3DNY | ROPE |
| 3DNZ | THIMBLE |
| 3DOA | FIRST TERMINAL ATTACHMENT FIRST END |
| 3DOB | FIRST TERMINAL ATTACHMENT SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3JCN | FIFTH TERMINAL ATTACHMENT FIRST END |
| 3JCP | FIFTH TERMINAL ATTACHMENT SECOND END |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| BRA000 | BRASS |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CUQ000 | COPPER-8-QUINOLINOLATE |
| CCA000 | COTTON |
| FBA000 | FIBER |
| FBL000 | HEMP |
| MHP000 | HEMP,MANILA |
| FEA000 | IRON |
| FEB000 | IRON CAST |
| FEC000 | IRON MALLEABLE |
| AAA013 | MANILA |
| PCA000 | PLASTIC |
| PCCX00 | PLASTIC ARAMID |
| PCCB00 | PLASTIC NYLON |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| PCAB00 | PLASTIC POLYOLEFIN |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAE00 | PLASTIC POLYSULFONE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCBD00 | PLASTIC VINYL CHLORIDE |
| PCDA01 | POLYAMIDE NYLON |
| NYP000 | POLYETHYLENE POLYAMIDE |
| PCX002 | POLYETHYLENE TEREPHTHALATE GLYCOL (PETG) |
| RCB000 | RUBBER SYNTHETIC |
| STA000 | STEEL |
| ST1035 | STEEL COMP 1035 |
| ST0304 | STEEL COMP 304 |
| STB000 | STEEL CORROSION RESISTING |
| WDC000 | WOOD |
| WLA000 | WOOL |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ACN | CORE |
| 3AEE | OVERALL |
| 3BAE | SOCKET |
| 3BDO | RING |
| 3CIL | COATING |
| 3CIM | IMPREGNATION |
| 3DMY | ALL ATTACHMENTS |
| 3DNA | FIRST INTERMEDIATE ATTACHMENT |
| 3DNB | SECOND INTERMEDIATE ATTACHMENT |
| 3DNC | THIRD INTERMEDIATE ATTACHMENT |
| 3DND | FOURTH INTERMEDIATE ATTACHMENT |
| 3DNE | FIFTH INTERMEDIATE ATTACHMENT |
| 3DNS | SECOND TERMINAL ATTACHMENT FIRST END |
| 3DNT | THIRD TERMINAL ATTACHMENT FIRST END |
| 3DNU | FOURTH TERMINAL ATTACHMENT FIRST END |
| 3DNV | SECOND TERMINAL ATTACHMENT SECOND END |
| 3DNW | THIRD TERMINAL ATTACHMENT SECOND END |
| 3DNX | FOURTH TERMINAL ATTACHMENT SECOND END |
| 3DNY | ROPE |
| 3DNZ | THIMBLE |
| 3DOA | FIRST TERMINAL ATTACHMENT FIRST END |
| 3DOB | FIRST TERMINAL ATTACHMENT SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3JCN | FIFTH TERMINAL ATTACHMENT FIRST END |
| 3JCP | FIFTH TERMINAL ATTACHMENT SECOND END |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
IF STYLE/REPLY CODE(s) C WERE ENTERED FOR MRC AJYA, YOU MUST ANSWER MRC (AJYB)
AJYA*DINTERMEDIATE ATTACHMENT TYPE
INDICATES THE TYPE OF INTERMEDIATE ATTACHMENT(S) PROVIDED.
Enter the applicable reply code from the table below
(AJYADC)
| Table 1 |
| Reply Code (AC06) | Reply |
| C | NOT ADJUSTABLE |
| D | SLIDING |
AJYB*JFIRST END TO FIRST FIXED INTERMEDIATE ATTACHMENT DISTANCE
THE DISTANCE WHICH LOCATES THE FIXED ATTACHMENT WITH RELATION TO THE ASSEMBLED END.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJYBJAB2.0*;AJYBJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALBY*DUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter the applicable reply code from the table below
(ALBYDBGQ)
| Table 1 |
| Reply Code (AH21) | Reply |
| BGQ | ANTENNA |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJLB2.0*;ABHPJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABVV*JPIN DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A PIN,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABVVJAA2.0*;ABVVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ACVU*JSTOCK DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE STOCK,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACVUJAA2.0*;ACVUJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
AFJF*DSPECIFIC USE
THE REQUIRED PURPOSE OR APPLICATION FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(AFJFDLQ*;AFJFDQA$DQB*)
| Table 1 |
| Reply Code (AD34) | Reply |
| QA | BASTING |
| LP | BRAIDING |
| QB | CARPET STITCHING |
| LQ | COIL WINDING MACHINE |
| QC | CROCHETING |
| QD | DARNING |
| LR | HAND KNITTING |
| QE | HEAVY LEATHER |
| LS | LUBRICATING |
| QF | RUG WEAVING |
| LT | WEAVING |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
PPRM*BPOST-CONSUMER RECOVERED MATERIALS PERCENTAGE
THE PERCENTAGE OF THE POST-CONSUMER RECOVERED OR RECYCLED MATERIAL INCLUDED IN THE ITEM.
Enter a reply with a minimum of one digit on either side of the decimal point.
(PPRMB2.0)
ADJT*JINSIDE WIDTH
AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJTJLB2.0*;ADJTJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJU*JINSIDE LENGTH
A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJUJAB2.0*;ADJUJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGCW*JWIRE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE WIRE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGCWJAA2.0*;AGCWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHMS*JUPPER LOOP INSIDE DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHMSJAB2.0*;AHMSJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHMT*JLOWER LOOP INSIDE DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHMTJAB2.0*;AHMTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHNS*JLEG END THICKNESS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHNSJAB2.0*;AHNSJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJRE*JBEARING SURFACE TO BEARING SURFACE DISTANCE
NONE.MRC DISCONTINUED FOR GENERAL USE, MRC MAINTAINED FOR DTRA USE ONLY.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJREJAC2.0*;AJREJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJRP*JINSIDE WIDTH BETWEEN EYES
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJRPJAC2.0*;AJRPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BRYZ*JDISTANCE ACROSS THROAT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BRYZJAC2.0*;BRYZJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CTZR*JDISTANCE FROM BAIL CENTER TO HOLE CENTER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTZRJLB2.0*;CTZRJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
ENVA*DENVIRONMENTAL ATTRIBUTE
THE SPECIFIC ATTRIBUTE OF THE ITEM THAT QUALIFIES IT AS AN ENVIRONMENTALLY PREFERABLE PRODUCT.
Enter the applicable reply code from the table below
(ENVADAAG)
| Table 1 |
| Reply Code (EN00) | Reply |
| AAG | CONTAINS RECYCLED MATERIAL |
AFJQ*JSTORAGE TEMP RANGE
THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFJQJFM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAB2.0*;ABRYJAB2.0$JAB2.0*;ABRYJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| J | YARDS PER POUND |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| M | PITCH |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information