expandFSC Information
5340Hardware, Commercial
expandColloquial Information
No Colloquials assigned to this Approve Item Name at this time
expandChange List
MRC PDNB has been added
MRC ZZZP has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED07173*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDST4621*;MATTDPCBG00$DST1805*;MATTDPCBG00$$DST1805*)
Table 1
Reply Code (MA01)Reply
ALA000ALUMINUM
ALB000ALUMINUM ALLOY
AL1100ALUMINUM ALLOY 1100
AL1145ALUMINUM ALLOY 1145
AL1230ALUMINUM ALLOY 1230
AL2014ALUMINUM ALLOY 2014
AL2017ALUMINUM ALLOY 2017
AL2024ALUMINUM ALLOY 2024
AL0034ALUMINUM ALLOY 208.0
AL0213ALUMINUM ALLOY 213.0
AL2219ALUMINUM ALLOY 2219
AL0038ALUMINUM ALLOY 222.0
AL0039ALUMINUM ALLOY 242.0
AL0025ALUMINUM ALLOY 295.0
AL3003ALUMINUM ALLOY 3003
AL0035ALUMINUM ALLOY 319.0
AL0036ALUMINUM ALLOY 328.0
AL0045ALUMINUM ALLOY 355.0
AL0046ALUMINUM ALLOY 356.0
AL0029ALUMINUM ALLOY 360.0
AL0031ALUMINUM ALLOY 380.0
AL0044ALUMINUM ALLOY 443.0
AL5052ALUMINUM ALLOY 5052
AL5083ALUMINUM ALLOY 5083
AL5086ALUMINUM ALLOY 5086
AL0026ALUMINUM ALLOY 514.0
AL0043ALUMINUM ALLOY 520.0
AL0059ALUMINUM ALLOY 535.0
AL5454ALUMINUM ALLOY 5454
AL6003ALUMINUM ALLOY 6003
AL6061ALUMINUM ALLOY 6061
AL6062ALUMINUM ALLOY 6062
AL6063ALUMINUM ALLOY 6063
AL6262ALUMINUM ALLOY 6262
AL0047ALUMINUM ALLOY 705.0
AL0048ALUMINUM ALLOY 707.0
AL7072ALUMINUM ALLOY 7072
AL7075ALUMINUM ALLOY 7075
AL0049ALUMINUM ALLOY 713.0
AL0771ALUMINUM ALLOY 771.0
AL0850ALUMINUM ALLOY 850.0
AL0002ALUMINUM ALLOY A356.0
AL0042ALUMINUM ALLOY A712.0
AL0061ALUMINUM ALLOY A850.0
AL0033ALUMINUM ALLOY B443.0
AL0041ALUMINUM ALLOY B514.0
AL0062ALUMINUM ALLOY B850.0
AL0060ALUMINUM ALLOY C355.0
AL0024ALUMINUM ALLOY D712.0
ASA000ASBESTOS
ASB000ASBESTOS CHRYSOTILE
CLD000CERAMIC
CUA000COPPER
CUB000COPPER ALLOY
CU0063COPPER ALLOY 110
CU0315COPPER ALLOY 130
CU0068COPPER ALLOY 170
CU0069COPPER ALLOY 172
CU0233COPPER ALLOY 173
CU0074COPPER ALLOY 230
CU0076COPPER ALLOY 240
CU0079COPPER ALLOY 260
CU0080COPPER ALLOY 268
CU0088COPPER ALLOY 342
CU0089COPPER ALLOY 353
CU0091COPPER ALLOY 360
CU0098COPPER ALLOY 462
CU0099COPPER ALLOY 464
CU0100COPPER ALLOY 482
CU0101COPPER ALLOY 485
CU0509COPPER ALLOY 509
CU0103COPPER ALLOY 510
CU0104COPPER ALLOY 511
CU0106COPPER ALLOY 524
CU0168COPPER ALLOY 825
CU0172COPPER ALLOY 836
CU0174COPPER ALLOY 842
CU0195COPPER ALLOY 903
CU0219COPPER ALLOY 954
CKA000CORK
CCA000COTTON
FBA000FIBER
WDA000FIBERBOARD
GSA000GLASS
GSB000GLASS FIBER
FEA000IRON
FE0015IRON ALLOY 651
FE0019IRON ALLOY 660
FE0038IRON CAST UNS F22200
FE0039IRON CAST UNS F22400
FE0055IRON CAST UNS F23131
FE0056IRON CAST UNS F23530
FE0059IRON CAST UNS F25530
FE0060IRON CAST UNS F26230
FEC000IRON MALLEABLE
NLB000NICKEL ALLOY
NL0008NICKEL ALLOY 400
NL0012NICKEL ALLOY 625
NL0017NICKEL ALLOY R-405
NL0096NICKEL ALLOY UNS N06002
PPA000PAPER
PCA000PLASTIC
PCD000PLASTIC ACRYLIC
PCBN00PLASTIC CELLULOSE ACETATE BUTYRATE
PCM000PLASTIC PHENOL-FORMALDEHYDE
PCN000PLASTIC PHENOLIC
PCP000PLASTIC POLYAMIDE
PCQ000PLASTIC POLYCAPROLACTAM
PCW000PLASTIC POLYESTER
PCZ000PLASTIC POLYHEXAMETHYLENE ADIPAMIDE
PCAM00PLASTIC POLYHEXAMETHYLENE AMIDE
PCAA00PLASTIC POLYHEXAMETHYLENE SEBACAMIDE
PCAF00PLASTIC POLYTETRAFLUOROETHYLENE
PCAR00PLASTIC POLYTRIFLUOROETHYLENE
PCAAABPLASTIC POLYUNDECANOAMIDE
PCCD00PLASTIC POLYVINYL
PCAJ00PLASTIC POLYVINYL CHLORIDE
PCBG00PLASTIC POLYVINYLIDENE CHLORIDE
PCAK00PLASTIC SILICONE
PCAW00PLASTIC TETRAFLUOROETHYLENE
PCAP00PLASTIC VINYL
PCBX00PLASTIC VINYLIDENE FLUORIDE
RCE000RUBBER
RC0024RUBBER BUTADIENE CLASS BR
RC0019RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
RC0022RUBBER BUTADIENE-STYRENE CLASS SBR
RC0007RUBBER CHLOROPRENE CLASS CR
RC0013RUBBER FLUOROCARBON CLASS FPM
RC0014RUBBER FLUOROSILICONE CLASS FQ
RC0017RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
RC0001RUBBER POLYACRYLATE CLASS ACM
RC0020RUBBER POLYISOPRENE NATURAL CLASS NR
RC0023RUBBER POLYSULFIDE CLASS T
RC0021RUBBER SILICONE CLASS Q
RCB000RUBBER SYNTHETIC
SLC000SILICON
STA000STEEL
ST1005STEEL COMP 1005
ST1006STEEL COMP 1006
ST1008STEEL COMP 1008
ST1009STEEL COMP 1009
ST1010STEEL COMP 1010
ST1011STEEL COMP 1011
ST1012STEEL COMP 1012
ST1013STEEL COMP 1013
ST1015STEEL COMP 1015
ST1016STEEL COMP 1016
ST1017STEEL COMP 1017
ST1018STEEL COMP 1018
ST1019STEEL COMP 1019
ST1020STEEL COMP 1020
ST1021STEEL COMP 1021
ST1022STEEL COMP 1022
ST1023STEEL COMP 1023
ST1025STEEL COMP 1025
ST1026STEEL COMP 1026
ST1029STEEL COMP 1029
ST1030STEEL COMP 1030
ST1035STEEL COMP 1035
ST1037STEEL COMP 1037
ST1038STEEL COMP 1038
ST1039STEEL COMP 1039
ST1040STEEL COMP 1040
ST1042STEEL COMP 1042
ST1043STEEL COMP 1043
ST1044STEEL COMP 1044
ST1045STEEL COMP 1045
ST1046STEEL COMP 1046
ST1049STEEL COMP 1049
ST1050STEEL COMP 1050
ST1053STEEL COMP 1053
ST1055STEEL COMP 1055
ST1060STEEL COMP 1060
ST1065STEEL COMP 1065
ST1070STEEL COMP 1070
ST1075STEEL COMP 1075
ST1078STEEL COMP 1078
ST1080STEEL COMP 1080
ST1084STEEL COMP 1084
ST1090STEEL COMP 1090
ST1095STEEL COMP 1095
ST1109STEEL COMP 1109
ST1110STEEL COMP 1110
ST1115STEEL COMP 1115
ST1116STEEL COMP 1116
ST1117STEEL COMP 1117
ST1118STEEL COMP 1118
ST1119STEEL COMP 1119
ST1132STEEL COMP 1132
ST1137STEEL COMP 1137
ST1139STEEL COMP 1139
ST1140STEEL COMP 1140
ST1141STEEL COMP 1141
ST1144STEEL COMP 1144
ST1145STEEL COMP 1145
ST1146STEEL COMP 1146
ST1151STEEL COMP 1151
ST1211STEEL COMP 1211
ST1212STEEL COMP 1212
ST1213STEEL COMP 1213
ST1215STEEL COMP 1215
ST0063STEEL COMP 12L14
ST1330STEEL COMP 1330
ST1345STEEL COMP 1345
ST1513STEEL COMP 1513
ST1518STEEL COMP 1518
ST1522STEEL COMP 1522
ST1524STEEL COMP 1524
ST1525STEEL COMP 1525
ST1526STEEL COMP 1526
ST1527STEEL COMP 1527
ST1536STEEL COMP 1536
ST1541STEEL COMP 1541
ST1547STEEL COMP 1547
ST1548STEEL COMP 1548
ST1551STEEL COMP 1551
ST1552STEEL COMP 1552
ST1561STEEL COMP 1561
ST1566STEEL COMP 1566
ST1572STEEL COMP 1572
ST0201STEEL COMP 201
ST0202STEEL COMP 202
ST0159STEEL COMP 203EZ
ST0301STEEL COMP 301
ST0302STEEL COMP 302
ST0180STEEL COMP 302B
ST0303STEEL COMP 303
ST0157STEEL COMP 303CU
ST0165STEEL COMP 303MA
ST0158STEEL COMP 303PB
ST0079STEEL COMP 303SE
ST0304STEEL COMP 304
ST0448STEEL COMP 304H
ST0080STEEL COMP 304L
ST0449STEEL COMP 304N
ST0305STEEL COMP 305
ST0152STEEL COMP 308
ST0309STEEL COMP 309
ST0153STEEL COMP 309S
ST0492STEEL COMP 309S-CB
ST0310STEEL COMP 310
ST0154STEEL COMP 310S
ST0155STEEL COMP 314
ST3140STEEL COMP 3140
ST0316STEEL COMP 316
ST0354STEEL COMP 316F
ST0450STEEL COMP 316H
ST0082STEEL COMP 316L
ST0451STEEL COMP 316N
ST0317STEEL COMP 317
ST0254STEEL COMP 317L
ST0321STEEL COMP 321
ST0452STEEL COMP 321H
ST0322STEEL COMP 322
ST0324STEEL COMP 324
ST0490STEEL COMP 329
ST0083STEEL COMP 3310H
ST0347STEEL COMP 347
ST0453STEEL COMP 347H
ST0348STEEL COMP 348
ST0640STEEL COMP 348H
ST0384STEEL COMP 384
ST0385STEEL COMP 385
ST0403STEEL COMP 403
ST0405STEEL COMP 405
ST0410STEEL COMP 410
ST4130STEEL COMP 4130
ST4135STEEL COMP 4135
ST0414STEEL COMP 414
ST4140STEEL COMP 4140
ST4150STEEL COMP 4150
ST0416STEEL COMP 416
ST0255STEEL COMP 416 PLUS X
ST0099STEEL COMP 416SE
ST0420STEEL COMP 420
ST0100STEEL COMP 420F
ST0284STEEL COMP 420FSE
ST0430STEEL COMP 430
ST0172STEEL COMP 430FSE
ST0102STEEL COMP 4320H
ST4340STEEL COMP 4340
ST0105STEEL COMP 440A
ST0106STEEL COMP 440B
ST0107STEEL COMP 440C
ST0108STEEL COMP 440F
ST0446STEEL COMP 446
ST4620STEEL COMP 4620
ST4621STEEL COMP 4621
ST0164STEEL COMP 50B60H
ST6150STEEL COMP 6150
ST0630STEEL COMP 630
ST0633STEEL COMP 633
ST0634STEEL COMP 634
ST8620STEEL COMP 8620
ST8630STEEL COMP 8630
ST8735STEEL COMP 8735
ST1802STEEL COMP 945A
ST1803STEEL COMP 945C
ST1805STEEL COMP 950A
ST1806STEEL COMP 950B
ST1807STEEL COMP 950C
ST1808STEEL COMP 950D
ST0028STEEL COMP E4340
ST0292STEEL COMP O2
ST0704STEEL COMP XM-12
ST0706STEEL COMP XM-15
ST0707STEEL COMP XM-16
ST0712STEEL COMP XM-21
ST0715STEEL COMP XM-26
ST9851STEEL COMP XM-34
ST0168STEEL COMP XM-7
ST0701STEEL COMP XM-9
STB000STEEL CORROSION RESISTING
ST0586STEEL UNS J03001
ST1470STEEL UNS J13046
ST1472STEEL UNS J14046
ST0567STEEL UNS J91150
ST1836STEEL UNS J92200
ST1168STEEL UNS J92500
ST1464STEEL UNS J92512
ST1169STEEL UNS J92600
ST0623STEEL UNS J92650
ST1177STEEL UNS J92710
ST0624STEEL UNS J92730
ST1178STEEL UNS J92800
ST1180STEEL UNS J92900
ST0625STEEL UNS J92910
ST1181STEEL UNS J92971
ST1186STEEL UNS J93400
ST1187STEEL UNS J93401
ST1188STEEL UNS J93402
ST1197STEEL UNS J94202
ST1198STEEL UNS J94203
ST1746STEEL UNS J94204
ST1206STEEL UNS J94603
ST1217STEEL UNS J95150
ST1815STEEL UNS K02603
ST1788STEEL UNS K11805
ST1481STEEL UNS K15590
ST0605STEEL UNS K22770
ST1530STEEL UNS K41583
ST1557STEEL UNS S31500
ST1058STEEL UNS S33100
ST0628STEEL UNS S34720
ST0629STEEL UNS S34723
TTA000TITANIUM ALLOY
TT0052TITANIUM ALLOY UNS R56400
TT0042TITANIUM UNS R50700
WLA000WOOL
ZNB000ZINC
ZNA000ZINC ALLOY
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
Table 1
Reply Code (AP33)Reply
GASSN STD
BFED SPEC
CFED STD
FMFR REF
DMIL SPEC
EMIL STD
HNATIONAL SPEC
Table 2
Reply Code (AP18)Reply
B1ST MATERIAL RESPONSE
C2ND MATERIAL RESPONSE
D3RD MATERIAL RESPONSE
E4TH MATERIAL RESPONSE
F5TH MATERIAL RESPONSE
GALL MATERIAL RESPONSES
ASINGLE MATERIAL RESPONSE
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDPCB000*;SFTTDPNA000$DPCAA00*;SFTTDPNA000$$DPCAA00*)
Table 1
Reply Code (SF01)Reply
MSB000ADHESIVE
ALB000ALUMINUM
ANA000ANODIZE
ASA000ASBESTOS
CDA000CADMIUM
CMA000CHROMATE
CMB000CHROMATE ZINC
CRA000CHROMIUM
CUA000COPPER
DCA000DICHROMATE
ENA000ENAMEL
END000ENAMEL BAKED
ENE000ENAMEL GLOSS
ENB000ENAMEL LUSTERLESS
ENF000ENAMEL SEMIGLOSS
ENC000ENAMEL SYNTHETIC LUSTERLESS
AUA000GOLD
LQA000LACQUER
LQE000LACQUER NITROCELLULOSE
PBA000LEAD
PBB000LEAD ALLOY
NLA000NICKEL
XXB000OXIDE
PNA000PAINT
PSA000PASSIVATE
PHA000PHOSPHATE
PHD000PHOSPHATE ZINC
PCM000PLASTIC PHENOLIC
PCAA00PLASTIC POLYPROPYLENE
PCB000PLASTIC POLYTETRAFLUOROETHYLENE
PCD000PLASTIC PYROXYLIN
PCH000PLASTIC VINYL
PRA000PRIMER
RHA000RHODIUM
RCB000RUBBER SYNTHETIC
SLA000SILICON
AGA000SILVER
SNA000TIN
SNB000TIN ALLOY
ZNA000ZINC
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
Table 1
Reply Code (AP33)Reply
GASSN STD
BFED SPEC
CFED STD
FMFR REF
DMIL SPEC
EMIL STD
HNATIONAL SPEC
Table 2
Reply Code (AP39)Reply
B1ST TREATMENT RESPONSE
C2ND TREATMENT RESPONSE
D3RD TREATMENT RESPONSE
E4TH TREATMENT RESPONSE
F5TH TREATMENT RESPONSE
GALL TREATMENT RESPONSES
ASINGLE TREATMENT RESPONSE
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDYE0000*;HUESDGR0024$DWH0000*;HUESDGR0024$$DWH0000*)
Table 1
Reply Code (AD06)Reply
BL0000BLACK
BU0000BLUE
GL0000GOLD
GY0146GRAY, FED STD 595, 26250
GY0000GRAY/GREY
GR0000GREEN
GR0024GREEN, FOREST
NA0000NATURAL
RE0000RED
WH0000WHITE
WH0025WHITE, FED STD 595, 17875
YE0000YELLOW
ABFF*DFURNISHED ITEMS
ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.
Enter the applicable reply code from the table below
(ABFFDABR*;ABFFDADW$$DAFJ*)
Table 1
Reply Code (AB28)Reply
ABRBOLT
ACBLOCK WASHER
ADWLOCKNUT
ABWNUT
AMXSCREW
AFJSETSCREW
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDDCJ)
Table 1
Reply Code (AN47)Reply
DDMCUSHION
DCJINSERT
IF STYLE/REPLY CODE(s) JG WERE ENTERED FOR MRC ENAC, YOU MUST ANSWER MRC (BDPK)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDJG)
Table 1
Reply Code (EN02)Reply
JGASBESTOS ALTERNATIVE PRODUCTS
BDPK*JASBESTOS CONTENT PERCENTAGE
THE ASBESTOS CONTENT OF THE ITEM,EXPRESSED IN PERCENT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BDPKJB2.0*;BDPKJB2.0$$JB2.1*)
Table 1
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
Table 1
Reply Code (AC28)Reply
ASPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BSTANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
CDRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
Table 1
Reply Code (AN62)Reply
SGOVERNMENT SPECIFICATION
TGOVERNMENT STANDARD
DMANUFACTURERS SOURCE CONTROL
RMANUFACTURERS SPECIFICATION
NMANUFACTURERS SPECIFICATION CONTROL
MMANUFACTURERS STANDARD
BNATIONAL STD/SPEC
APROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
PPROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
Table 1
Reply Code (AD08)Reply
ALALLOY
ANANNEX
APAPPENDIX
ACAPPLICABILITY CLASS
ARARRANGEMENT
ASASSEMBLY
ABASSORTMENT
BXBOX
CYCAPACITY
CACASE
CTCATEGORY
CLCLASS
CECODE
CRCOLOR
CCCOMBINATION CODE
CNCOMPONENT
CPCOMPOSITION
CMCOMPOUND
CDCONDITION
CSCONSTRUCTION
DEDESIGN
DGDESIGNATOR
DWDRAWING NUMBER
EGEDGE
ENEND
FYFAMILY
FGFIGURE
FNFINISH
FMFORM
FAFORMULA
GRGRADE
GPGROUP
BAIMAGE COLOR
NSINSERT
TMITEM
KDKIND
KTKIT
LGLENGTH
LTLIMIT
MKMARK
AAMARKER
MLMATERIAL
BBMAXIMUM DENSITY
MHMESH
MEMETHOD
BCMINIMUM DENSITY
MDMODEL
MTMOUNTING
NRNUMBER
PTPART
PNPATTERN
PCPHYSICAL CONDITION
PSPIECE
PLPLAN
PRPOINT
QAQUALITY
RNRANGE
RTRATING
RFREFERENCE NUMBER
SCSCHEDULE
SBSECTION
SLSELECTION
SESERIES
SVSERVICE
SXSET
SASHADE
SHSHAPE
SGSHEET
SZSIZE
PZSPECIES
SQSPECIFICATION SHEET
SDSPEED
STSTYLE
SSSUBCLASS
SFSUBFORM
SPSUBTYPE
SNSURFACE CONDITION
SYSYMBOL
SMSYSTEM
TBTABLE
TNTANNAGE
TPTEMPER
TXTEXTURE
TKTHICKNESS
TTTREATMENT
TRTRIM
TYTYPE
YNUNIT
VAVARIETY
WTWEIGHT
WDWIDTH
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
Table 1
Reply Code (AN58)Reply
AADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDPDA000*;PRMTDAUA000$DRTA000*;PRMTDAUA000$$DRTA000*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJIRA000F2.0*;PMWTJIRA000E2.0$$JIRA000F2.1*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
Table 2
Reply Code (AG14)Reply
EGRAINS, TROY
RGRAMS
FOUNCES, TROY
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJRHA0002.0*;PMLCJRHA0002.0$JRHA0002.0*;PMLCJRHA0002.0$$JRHA0002.1*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)