Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
AAS1475	A1	STRAIGHT THRU
AAS1484	A10	STRAIGHT THRU GIVE "ADQM" AND "ADQN" ONLY IF FLANGED ONE OR TWO ENDS
AAS1485	A11	TEE GIVE "ADQL" AND "ADAP" ONLY OF FLANGED BOTH ENDS
AAS1486	A12	ANGLE
AAS1487	A13	TEE ANGLE GIVE "ADQL" "ADQM" AND "ADQQ" ONLY IF FLANGED ALL ENDS
AAS1488	A14	ANGLE W/ OFFSET GIVE "ADQM" AND "ADQN" ONLY IF FLANGED BOTH ENDS
AAS1489	A15	TEE W/ OFFSET GIVE "ADQL" AND "ADQM" ONLY IF FLANGED BOTH ENDS
AAS1490	A16	ANGLE W/ OFFSET GIVE "ADQM" AND "ADQN" ONLY IF FLANGED BOTH ENDS
AAS1491	A17	TEE W/ OFFSET GIVE "ADQL" AND "ADQM" ONLY IF FLANGED ALL ENDS
AAS1492	A18	STRAIGHT THRU GIVE "ADQM" AND "ADQN" ONLY IF FLANGED BOTH ENDS
AAS1493	A19	CROSS GIVE "ADQM" "ADQN" "ADQP" AND "ADQQ" ONLY IF FLANGED ALL ENDS
AAS1476	A2	TEE GIVE "ADQL" AND "ADQM" ONLY WHEN FLANGED ALL ENDS
AAS1494	A20	STRAIGHT THRU GIVE "ADQM" AND "ADQN" ONLY IF FLANGED BOTH ENDS
AAS1495	A21	TEE ANGLE GIVE "ADQL" "ADQM" ONLY IF FLANGED ALL ENDS
AAS1496	A22	TEE GIVE "ADQM" "ADQN" AND "ADQP" ONLY IF FLANGED ALL ENDS
AAS1497	A23	ANGLE GIVE "ADQM" "ADQN" AND "ADQP" ONLY IF FLANGED ALL ENDS
AAS1498	A24	ANGLE GIVE 'ADQM" "ADQN" AND "ADQP" ONLY IF FLANGED ALL ENDS
AAS1499	A25	ANGLE GIVE "ADQM" "ADQM" "ADQN" AND "ADQP" ONLY IF FLANGED ALL ENDS
AAS1500	A26	TEE ANGLE W/ OFFSET GIVE "ADQN" AND "ADQP" ONLY IF FLANGED ALL ENDS
AAS1501	A27	TEE W/ OFFSET GIVE "ADQM" "ADQN" AND "ADQP" ONLY IF FLANGED ALL ENDS
AAS1502	A28	GIVE "ADQM" "ADQN" AND "ADQP" ONLY IF FLANGED ALL ENDS
AAS1503	A29	TEE W/ OFFSET GIVE "ADQL" "ADQM" ONLY IF FLANGED ALL ENDS
AAS1477	A3	CROSS GIVE "ADQM" "ADQN" "ADQP" "ADQQ" ONLY IF FLANGED ALL ENDS
AAS1504	A30	STRAIGHT THRU GIVE "ADQM" AND "ADQN" ONLY IF FLANGED ALL ENDS
AAS1505	A31	STRAIGHTER THRU GIVE "ADQM" "ADQN" "ADQP" AND "ADQQ" ONLY IF FLANGED ALL ENDS
AAS1506	A32	STRAIGHT THRU GIVE "ADQL" ONLY IF FLANGED BOTH ENDS
AAS1507	A33	STRAIGHT THRU GIVE "ADQM" AND "ADQN" ONLY IF FLANGED BOTH ENDS
AAS1508	A34	TEE W/ OFFSET GIVE "ADQM" AND "ADQN" "ADQP" ONLY IF FLANGED ALL ENDS
AAS1509	A35	ANGLE W/ OFFSET GIVE "ADQM" AND "ADQN" ONLY IF FLANGED BOTH ENDS
AAS1510	A36	ANGLE W/ OFFSET GIVE "ADQM" AND "ADQN" ONLY IF FLANGED BOTH ENDS
AAS1511	A37	ANGLE W/ OFFSET GIVE "ADQL" ONLY IF FLANGED BOTH ENDS
AAS1512	A38	ANGLE W/ OFFSET GIVE "ADQL" ONLY IF FLANGED BOTH ENDS
AAS1513	A39	ANGLE GIVE "ADQM" AND "ADQN" ONLY FLANGED BOTH ENDS
AAS1478	A4	STRAIGHT THRU
AAS1514	A40	ANGLE W/ OFFSET GIVE "ADQM" AND "ADGN" ONLY IF FLANGED BOTH ENDS
AAS1515	A41	TEE W/ OFFSET GIVE "ADQM" "ADQN" AND "ADQP" ONLY IF FLANGED ALL ENDS
DQ00257	A42	ANGLE W/ OFFSET GIVE "ADQM" "ADQN" AND "ADAP" ONLY IF FLANGED ALL ENDS
AAS1516	A43	SINGLE CONNECTION ANGLE FLOW
AAS1517	A44	STRAIGHT THRU GIVE "ADQL" ONLY WHEN FLANGED BOTH ENDS
AAS1518	A45	ANGLE GIVE "ADQM" AND "ADQN" ONLY WHEN FLANGED BOTH ENDS
AAS1519	A46	SINGLE CONNECTION STRAIGHT THRU
AAS1520	A47	SINGLE CONNECTION
AAS1521	A48	SINGLE CONNECTION ANGLE FLOW
AAS1479	A5	Y ANGLE
AAS1480	A6	STRAIGHT THRU W/ OFFSET GIVE "ADQL" ONLY WHEN BOTH ENDS FLANGED
AAS1481	A7	ANGLE GIVE "ADQM" AND "ADQN" ONLY IF FLANGED ONE OR TWO ENDS
AAS1482	A8	STRAIGHT THRU Y-PATTERN GIVE "ADQL" ONLY WHEN BOTH ENDS FLANGED
AAS1483	A9	Y ANGLE
AAS1522	B1	SINGLE CONNECTION, STRAIGHT FLOW
AAS1525	B10	MULTIPLE CIONNECTION
AAS1523	B2	SINGLE CONNECTION, STRAIGHT FLOW
AAS1524	B3	SINGLE CONNECTION, STRAIGHT FLOW
AAS1526	C1	STRAIGHT THRU
AAS1527	C2	ANGLE, MULTIPLE CONNECTION
AAS1528	C3	ANGLE GIVE "ADQM" OR "ADQN" IF FLANGED ONE OR TWO ENDS
AAS1529	C4	ANGLE GIVE "ADQN" IF FLANGED ENDS
AAS1530	C5	ANGLE GIVE "ADQM" AND "ADQN" IF FLANGED ONE OR TWO ENDS
AAS1531	D1	STRAIGHT THRU
AAS1532	D2	STRAIGHT THRU
AAS1533	D3	STRAIGHT THRU
AAS1534	D4	STRAIGHT THRU
AAS1535	D5	STRAIGHT THRU
AAS1536	E1	FLUSH VALVE (ENCLOSED TYPE)
AAS1537	E2	FLOAT VALVE W/RENEWABLE SEAT, VACUUM BREAKER, FLOAT ROD AND REFILL TUBE
AAS1538	E3	FLOAT VALVE W/RENEWABLE SEAT AND REFILL TUBE
AAS1539	E4	FLUSH VALUE (EXPOSED TYPE)
AAS1540	F1	CYLINDRICAL (SCREWED)
AAS1541	F2	LOW OR MEDIUM PRESSURE (SCREWED)
AAS1542	F3	LOW OR MEDIUM PRESSURE (FLANGED)
AAS1543	F4	HIGH PRESSURE (FLANGED)

ADQL*JFACE TO FACE DISTANCE

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADQLJAB2.0*;ADQLJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADQM*JFIRST CONNECTION FACE TO CENTERLINE DISTANCE

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADQMJAC2.0*;ADQMJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADQN*JSECOND CONNECTION FACE TO CENTERLINE DISTANCE

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADQNJAB2.0*;ADQNJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADQP*JTHIRD CONNECTION FACE TO CENTERLINE DISTANCE

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADQPJAC2.0*;ADQPJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADQQ*JFOURTH CONNECTION FACE TO CENTERLINE DISTANCE

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADQQJAA2.0*;ADQQJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADQR*JCENTER TO CENTER DISTANCE

THE CENTER TO CENTER DISTANCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADQRJAA2.0*;ADQRJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ACSX*JOFFSET DISTANCE

THE DISTANCE OF OFFSET IN THE ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ACSXJAC2.0*;ACSXJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADAR*JBODY OUTSIDE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADARJAB2.0*;ADARJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADQUDFLOW CONTROL DEVICE

THE PART THAT CONTROLS THE FLOW THROUGH THE ITEM.

Enter the applicable reply code from the table below

(ADQUDAB*;ADQUDAU$DAM*;ADQUDAU$$DAM*)

Table 1
	Reply Code (AC57)	Reply
	A	ANY ACCEPTABLE
	AA	BALL
	AB	BALL, PORTED
	CT	BELLOWS
	CY	CAGE
	AY	CLOSURE
	AC	CONE
	AD	CONE, BOTTOM GUIDED
	AE	CONE, TOP GUIDED
	BB	CORE
	AQ	DIAPHRAGM
	AM	DISK, BOTTOM GUIDED
	AF	DISK, CIRCULAR
	AZ	DISK, DUAL
	AG	DISK, FLAT
	AN	DISK, FLAT, BOTTOM GUIDED
	AP	DISK, FLAT, TOP AND BOTTOM GUIDED
	BA	DISK, LIFT
	AH	DISK, PLUG TYPE
	AJ	DISK, SOLID WEDGE
	AK	DISK, SPLIT WEDGE
	AR	DISK, SWING TYPE
	AL	DISK, TOP GUIDED
	CZ	GROUND KEY
	AS	NEEDLE
	AT	PISTON, FREE TYPE
	CH	PISTON, SPRING LOADED
	AU	PISTON, WEIGHTED TYPE
	AV	PLUG
	AW	POPPET
	AX	STEM AND INTEGRAL DISK

ACKL*DMEDIA FOR WHICH DESIGNED

THE TYPE OF SERVICE WITH WHICH THE ITEM IS DESIGNED TO BE USED. PLEASE USE MRC MEDA IN PLACE OF THIS DISCONTINUED MRC.

Enter the applicable reply code from the table below

(ACKLDABC*;ACKLDABF$$DBT*)

Table 1
	Reply Code (AB75)	Reply
	AA	ACETYLENE
	DU	AEROSOL INSECTICIDE
	AB	AIR
	AD	ALCOHOL, ETHYL
	AE	ALCOHOL, METHYL
	ABF	AMMONIA, ANHYDROUS
	AG	AMMONIA, GASEOUS
	AH	AMMONIA, LIQUID
	A	ANY ACCEPTABLE
	AJ	ARGON
	AK	BROMOCHLOROMETHANE
	ABB	BUTANE
	AR	BUTANE
	AS	CARBON DIOXIDE
	DW	CARBON MONOXIDE
	AT	CARBON TETRACHLORIDE
	DX	CARBOXIDE
	DY	CARRENE-7, GAS
	DZ	CARRENE-7, LIQUID
	AV	CHLORINE
	HD	CHLOROFLUOROHYDROCARBON
	EA	DICHLORODIFLUOROMETHANE
	EB	DIESTER BASE LUBRICATING OIL
	EC	ETHYL CHLORIDE
	BB	ETHYLENE GLYCOL
	ED	ETHYLENE OXIDE
	AHU	FOAM LIQUID
	AHV	FOAM POWDER
	ES	FREON
	RJ	FREON 112
	LK	FREON 113
	ABE	GAS
	BL	HELIUM
	EE	HELIUM-OXYGEN MIXTURE
	BN	HYDRAULIC FLUID, PHOSPHATE-ESTER BASE
	BP	HYDRAULIC FLUID, SILICATE-ESTER BASE
	BQ	HYDRAZINE
	BR	HYDRAZINE/UNSYMMETRIC DIMETHYL HYDRAZINE, 50/50- UDMH
	BS	HYDROCARBON FUELS AND OILS
	BT	HYDROGEN
	ABD	INERT GAS
	BU	INGESTED LIQUIDS
	EF	METHYL CHLORIDE, GAS
	EG	METHYL CHLORIDE, LIQUID
	CF	NITRIC ACID
	AAP	NITROGEN
	CK	NITROGEN TETRAOXIDE
	CH	NITROGEN, GASEOUS
	CJ	NITROGEN, LIQUID
	EH	NITROUS OXYGEN
	AAD	OIL
	AAQ	OXYGEN
	CN	OXYGEN, GASEOUS
	CP	OXYGEN, LIQUID
	EJ	PHOSGENE
	ABC	PROPANE
	EL	PROPANE GAS
	EM	PROPANE, LIQUID
	AAE	REFRIGERANT
	CS	REFRIGERANT 12
	CT	REFRIGERANT 13
	CU	REFRIGERANT 22
	CX	REFRIGERANT 500
	AAY	REFRIGERANT R-502
	DC	STEAM
	DD	SULPHUR DIOXIDE, GASEOUS
	ET	SULPHUR HEXAFLUORIDE
	DE	TRICHLORETHYLENE
	RK	TRICHLOROMONOFLUOROMETHANE
	DH	WATER, FRESH
	DK	WATER, OIL OR GAS
	DL	WATER, SALT

ABJHJTEMP RATING

A VALUE WHICH EXPRESSES THE DEGREE OF HEAT OR COLD AS APPLIED TO THE OPERATION,OR LIMITATION OF OPERATION,OF AN ITEM.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit as in the first and second examples.For negative temperature values, precede the numeric portion of the reply with the letter “M” as in the third and fourth examples.If ISAC coding is authorized for this requirement and one or more of the temperature values in negative, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.Also precede the numeric portion of the reply with the letter “M” as in the fifth and sixth examples.

(ABJHJF68.0*; ABJHJC0.0$$JC35.0*; ABJHJFCM15.0*; ABJHJFM40.0$$JF75.0*; ABJH1BJFM25.0*; ABJH1BJCM35.0$$JCM5.0*)

Table 1
	Reply Code (AB36)	Reply
	C	CELSIUS
	F	FAHRENHEIT

AFKZDTANK TYPE FOR WHICH DESIGNED

INDICATES THE TYPE OF TANK FOR WHICH THE ITEM IS DESIGNED.

Enter the applicable reply code from the table below

(AFKZDC)

Table 1
	Reply Code (AE25)	Reply
	B	HIGH
	C	LOW

AHZVDSUBMERSIBILITY

AN INDICATION OF WHETHER OR NOT AN ITEM IS CAPABLE OF OPERATION WHILE SUBMERGED.

Enter the applicable reply code from the table below

(AHZVDAC)

Table 1
	Reply Code (AG86)	Reply
	AC	NONSUBMERSIBLE
	AB	SUBMERSIBLE

ACQVDINLET LOCATION

INDICATES THE LOCATION OF THE INLET ON THE ITEM.

Enter the applicable reply code from the table below

(ACQVDGK*;ACQVDDJ$$DAD*)

Table 1
	Reply Code (AE46)	Reply
	AD	BACK
	DJ	BOTTOM
	GK	LEFT SIDE
	GL	RIGHT SIDE
	DK	TOP

ABFF*DFURNISHED ITEMS

ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.

Enter the applicable reply code from the table below

(ABFFDEE*;ABFFDCZ$DAHD*;ABFFDCZ$$DAHD*)

Table 1
	Reply Code (AB28)	Reply
	CN	ADAPTER
	DL	ANGLE SUPPLY STOP
	DM	AUTOMATIC TEMPERATURE CONTROL
	DN	CAP
	DP	CAP AND CHAIN
	DQ	CHAIN AND PLUG
	DR	CHAIN AND RING
	BHG	COUPLING NUT W/TAILPIECE
	DS	DETACHABLE DISTRIBUTOR
	AHH	ELBOW FLUSH CONNECTION
	DT	EMERGENCY MANUAL OPERATING DEVICE
	DU	EMERGENCY OPENING DEVICE
	AHD	FILTER SCREEN
	RL	FLAME SCREEN
	DV	FLOAT
	DW	FLOAT AND ROD
	DX	FLOAT ROD
	RH	FLUSH PIPE
	RJ	FRICTION WASHER
	DY	GAGE HATCH
	AT	GASKET
	AHF	INLET CONNECTION
	AHG	INLET TAILPIECE
	AHK	KEY
	DZ	LOOSE KEY
	EA	MANUAL OPERATING DEVICE
	EB	MANUAL UNLOADER ON PRESSURE SIDE
	EC	MANUAL UNLOADER ON VACUUM SIDE
	BC	MOUNTING BRACKET
	RB	NIPPLE
	ED	NUT
	EE	NUT AND SLEEVE
	EF	POSITION INDICATOR
	EG	PRESSURE GAGE
	AHC	REDUCER BUSHING
	EH	REFILL TUBE
	TS	RETAINING RING
	RK	RUBBER WASHER
	EJ	SAFETY DEVICE
	RM	SIPHON TUBE
	FB	SLEEVE
	RN	SPUD FLANGE
	EK	STRAIGHT SUPPLY STOP
	CZ	TEMPERATURE GAGE
	EL	TEST ATTACHMENT
	AHE	VACUUM BREAKER
	EM	VOLUME CONTROL
	EN	WALL AND SPUD FLANGES
	JB	WASHER
	YS	WRENCH

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZW*GDEPARTURE FROM CITED DOCUMENT

THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.

Enter the reply in clear text.

(ZZZWGAS MODIFIED BY MATERIAL*)

ZZZX*GDEPARTURE FROM CITED DESIGNATOR

THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.

Enter the reply in clear text.

(ZZZXGAS MODIFIED BY MATERIAL*)

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION

A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.

Enter the Reply Code from the table below.

(ELCDDA*)

Table 1
	Reply Code (AN58)	Reply
	A	ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD

ENAC*DENVIRONMENTAL ATTRIBUTE CODE

INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.

Enter the applicable reply code from the table below

(ENACDG4)

Table 1
	Reply Code (EN02)	Reply
	G4	COMPREHENSIVE PROCUREMENT GUIDELINE - VEHICULAR PRODUCTS - REBUILT VEHICULAR PARTS

SUPP*GSUPPLEMENTARY FEATURES

CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.

Enter the reply in clear text.Separate multiple replies with a semicolon.

(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)

Reply to this MRC in accordance with Volume 3.

AGAV*GEND ITEM IDENTIFICATION

THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.

Enter the reply in clear text.

(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)

ZZZV*GFSC APPLICATION DATA

THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.

Enter the name of the next higher classifiable assembly in clear text.

(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)

CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY

THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.

Enter the reply in clear text.

(CXCYGLINE PROCESSOR CONTROL BOARD*)

HZRD*DHAZARDOUS SUBSTANCES

THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.

Enter the applicable reply code from the table below

(HZRDDHAZ029*;HZRDDHAZ012$$DHAZ042*)

Table 1
	Reply Code (HZ00)	Reply
	HAZ042	ASBESTOS
	HAZ012	COPPER
	HAZ029	LEAD

MATT*DMATERIAL

THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(MATT3BKIDPCAC00*;MATT3BKIDPCAC00$DPCA000*;MATT3BKIDPCAC00$$DPCA000*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AAT	BODY
	3AEE	OVERALL
	3BAU	SEAT
	3BCM	FLOW CONTROL DEVICE
	3BKI	STEM
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (MA01)	Reply
	CUA000	COPPER
	CUB000	COPPER ALLOY
	FEB000	IRON CAST
	PCA000	PLASTIC
	PCAC00	PLASTIC POLYPROPYLENE
	RC0019	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
	RC0007	RUBBER CHLOROPRENE CLASS CR
	RCB000	RUBBER SYNTHETIC
	STB000	STEEL CORROSION RESISTING

CLQL*GCOLLOQUIAL NAME

A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.

Enter the reply in clear text.

(CLQLGWOVEN WIRE CLOTH*)