An electronic device which demodulates radio frequency energy and may also provide a direct current control potential.

FSC Information

1285	Fire Control Radar Equipment, except Airborne
1430	Guided Missile Remote Control Systems
5895	Miscellaneous Communication Equipment
5963	Electronic Modules
6625	Electrical and Electronic Properties Measuring and Testing Instruments

Colloquial Information

J3353	FREQUENCY DETECTOR GROUP,RADIO
G4455	SIGNAL SAMPLER
H3817	DETECTOR STAGE,RADIO FREQUENCY
I1042	DETECTOR,RF,CRYSTAL,COAXIAL
I0381	RF MODULE ASSEMBLY PHASE DETECTOR

Change List

ISAC Reply 3FAH added to MRC AWLS.

MRC PDNB has been added

MRC ZZZP has been deleted

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED05474*)

BHSXDCIRCUIT CONSTRUCTION TYPE

INDICATES THE TYPE OF CIRCUIT CONSTRUCTION PROVIDED IN THE ITEM.

Enter the applicable reply code from the table below

(BHSXDAF*;BHSXDAA$$DAW*)

Table 1
	Reply Code (AM43)	Reply
	AA	ELECTROMECHANICAL
	AW	ELECTRON TUBE
	AF	SOLID STATE

AKNADINCLOSURE TYPE

INDICATES THE TYPE OF INCLOSURE PROVIDED TO COAT,COVER,PROTECT,OR ENCASE THE ITEM.

Enter the applicable reply code from the table below

(AKNADAP)

Table 1
	Reply Code (AG85)	Reply
	AC	ENCAPSULATED
	AN	ENCASED
	AD	HERMETICALLY SEALED
	AE	OPEN
	AP	PARTIALLY INCLOSED

AMQYDINSTALLATION DESIGN

THE INSTALLATION FOR WHICH THE ITEM IS DESIGNED.

Enter the applicable reply code from the table below

(AMQYDAD*;AMQYDCD$$DAW*)

Table 1
	Reply Code (AJ17)	Reply
	AW	DRAWER
	AC	FREE-STANDING
	CB	FREE-STANDING WITH CASTERS
	AE	FREE-STANDING WITH LEGS
	CC	MECHANICAL
	AK	MOBILE
	CD	MODULE
	AP	PANEL
	AF	PORTABLE
	AZ	RACK
	AD	TOP OF CABINET/COUNTER
	AM	TRANSPORTABLE

IF STYLE/REPLY CODE(s) A OR B WERE ENTERED FOR MRC AFSU, YOU MUST ANSWER MRC (AFHH)

AFSUDAVERAGE LIFE MEASUREMENT

A TERM USED TO DENOTE THE SPECIFIC MEASUREMENT OF DURATION USED TO INDICATE THE AVERAGE LIFE OF THE ITEM.

Enter the applicable reply code from the table below

(AFSUDA)

Table 1
	Reply Code (AE52)	Reply
	B	HOURS
	C	INDEFINITE
	N	NOT RATED
	A	YEARS

AFHH*BAVERAGE LIFE RATING

THE NUMERIC VALUE OF THE LIFE EXPECTANCY OF THE ITEM.

Enter a reply with a minimum of one digit on either side of the decimal point.

(AFHHB2.0)

IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABHP and ABKW and ABMK)

IF STYLE/REPLY CODE(s) 2 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABHP and ADAV)

AGTALBASIC SHAPE STYLE

THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE BASIC APPEARANCE OF THE ITEM.

Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.

(AGTAL3)

Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
DQ00286	1	RECTANGULAR OR SQUARE
DQ00287	2	CYLINDRICAL
DQ00288	3	IRREGULAR

ADAV*JOVERALL DIAMETER

A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADAVJAC2.0*;ADAVJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABMK*JOVERALL WIDTH

AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABKW*JOVERALL HEIGHT

THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABHP*JOVERALL LENGTH

THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BHTB*JFREQUENCY PER CHANNEL

THE PORTION OF THE FREQUENCY SPECTRUM AT WHICH AN ITEM IS DESIGNED TO RECEIVE OR TRANSMIT SIGNAL POWER.

Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BHTBJMAAAV2.0*;BHTBJMAAAV2.0$$JMAAAV2.1*)

Table 1
	Reply Code (AC32)	Reply
	G	GIGAHERTZ
	E	HERTZ
	K	KILOHERTZ
	M	MEGAHERTZ

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

Table 3
	Reply Code (AN18)	Reply
	AAX	10TH INPUT CHANNEL
	ABC	10TH OUTPUT CHANNEL
	AAY	11TH INPUT CHANNEL
	AAZ	12TH INPUT CHANNEL
	ABH	13TH INPUT CHANNEL
	AAH	1ST INPUT CHANNEL
	AAC	1ST OPERATING CHANNEL
	AAN	1ST OUTPUT CHANNEL
	AAJ	2ND INPUT CHANNEL
	AAD	2ND OPERATING CHANNEL
	AAP	2ND OUTPUT CHANNEL
	AAK	3RD INPUT CHANNEL
	AAE	3RD OPERATING CHANNEL
	AAQ	3RD OUTPUT CHANNEL
	AAL	4TH INPUT CHANNEL
	AAF	4TH OPERATING CHANNEL
	AAR	4TH OUTPUT CHANNEL
	AAS	5TH INPUT CHANNEL
	AAT	5TH OUTPUT CHANNEL
	AAU	6TH INPUT CHANNEL
	AAW	6TH OUTPUT CHANNEL
	AAV	7TH INPUT CHANNEL
	ABD	7TH OUTPUT CHANNEL
	ABA	8TH INPUT CHANNEL
	ABF	8TH OUTPUT CHANNEL
	ABB	9TH INPUT CHANNEL
	ABG	9TH OUTPUT CHANNEL
	AAG	INPUT CHANNEL
	AAB	OPERATING CHANNEL
	AAM	OUTPUT CHANNEL

BHSY*ASWITCHING RATE PER SECOND

THE NUMBER OF SWITCHING CYCLES THAT OCCUR PER SECOND.

Enter the numeric reply with a minimum of one digit.

(BHSYA10*)

BHSZ*JFREQUENCY SHIFT

THE SHIFT OF THE FREQUENCY OF THE ITEM.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BHSZJG2.0*;BHSZJG2.0$$JG2.1*)

Table 1
	Reply Code (AC32)	Reply
	G	GIGAHERTZ
	E	HERTZ
	K	KILOHERTZ
	M	MEGAHERTZ

IF STYLE/REPLY CODE(s) J WERE ENTERED FOR MRC BHTD, YOU MUST ANSWER MRC (BHTF)

BHTD*DFREQUENCY ADJUSTMENT TYPE

INDICATES THE TYPE OF FREQUENCY ADJUSTMENT INCLUDED IN THE ITEM.

Enter the applicable reply code from the table below

(BHTDDJ)

Table 1
	Reply Code (AD63)	Reply
	E	CONTINUOUS
	J	STEPPED

BHTF*JINDIVIDUAL STEP FREQUENCY

THE FREQUENCY OF EACH STEP.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BHTFJK2.0*;BHTFJK2.0$$JK2.1*)

Table 1
	Reply Code (AC32)	Reply
	G	GIGAHERTZ
	E	HERTZ
	K	KILOHERTZ
	M	MEGAHERTZ

BHTG*BVARIATION FREQUENCY RATING IN DECIBELS

THE AMOUNT OF ALLOWABLE VARIATION RELATIVE TO A SPECIFIED FREQUENCY LEVEL,EXPRESSED IN DECIBELS.

Enter a reply with a minimum of one digit on either side of the decimal point.

(BHTGB2.0*;BHTGB2.0$$BM2.0*)

AJVF*JPHASE SHIFT ANGLE IN DEG

THE DIFFERENCE BETWEEN THE PHASE TIME OF TWO OR MORE VOLTAGES OR CURRENTS OF THE SAME FREQUENCY,AT THE SAME INSTANT OF TIME,EXPRESSED IN DEGREES.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AJVFJABA2.0*;AJVFJABA2.0$$JABA2.1*)

Table 1
	Reply Code (AG04)	Reply
	AB	INPUT TO OUTPUT
	AC	OUTPUT TO INPUT

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AFBH*AINDIVIDUAL SECTION QUANTITY

THE NUMBER OF INDIVIDUAL SECTIONS INCLUDED IN THE ITEM.

Enter the numeric reply with a minimum of one digit.

(AFBHA10*)

BHTH*BATTENUATION IN DECIBELS

THE DECREASE IN STRENGTH OF AN ELECTRICAL IMPULSE,EXPRESSED IN DECIBELS.

Enter a reply with a minimum of one digit on either side of the decimal point.

(BHTHB2.0*;BHTHB2.0$$BM2.0*)

BHTJ*JAVERAGE POWER RATING PER CHANNEL

THE RATED AVERAGE POWER FOR EACH CHANNEL.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BHTJJLB2.0*;BHTJJLB2.0$$JLB2.1*)

Table 1
	Reply Code (AC33)	Reply
	L	KILOWATTS
	R	MEGAWATTS
	M	MILLIWATTS
	W	WATTS

Table 2
	Reply Code (AC00)	Reply
	B	INPUT
	F	OUTPUT

BHTK*JSIGNAL VOLTAGE RATING PER CHANNEL

THE RATED SIGNAL VOLTAGE FOR EACH CHANNEL.

Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BHTKJVCF2.0*;BHTKJVCF2.0$$JVCF2.1*)

Table 1
	Reply Code (AB63)	Reply
	K	KILOVOLTS
	M	MEGAVOLTS
	U	MICROVOLTS
	L	MILLIVOLTS
	V	VOLTS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

Table 3
	Reply Code (AC00)	Reply
	B	INPUT
	F	OUTPUT

BHTL*JOVERALL GAIN

THE INCREASE IN ENERGY FROM THE INPUT TO THE OUTPUT.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BHTLJAA2.0*;BHTLJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AB49)	Reply
	AA	AMPERES
	AD	DECIBELS
	BA	MILLIAMPERES
	BB	MILLIVOLTS
	AS	VOLTS

BHTN*JIMPEDANCE RATING PER CHANNEL

THE TOTAL OPPOSITION (RESISTIVE AND REACTIVE) TO THE FLOW OF ALTERNATING CURRENT PER CHANNEL.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BHTNJMRAAU2.0*;BHTNJMRAAU2.0$$JMRAAU2.1*)

Table 1
	Reply Code (AE75)	Reply
	GF	GIGOHMS
	KR	KILOHMS
	MR	MEGOHMS
	MC	MICROHMS
	ML	MILLIOHMS
	QR	OHMS

Table 2
	Reply Code (AN18)	Reply
	AAX	10TH INPUT CHANNEL
	ABC	10TH OUTPUT CHANNEL
	AAY	11TH INPUT CHANNEL
	AAZ	12TH INPUT CHANNEL
	ABH	13TH INPUT CHANNEL
	AAH	1ST INPUT CHANNEL
	AAC	1ST OPERATING CHANNEL
	AAN	1ST OUTPUT CHANNEL
	AAJ	2ND INPUT CHANNEL
	AAD	2ND OPERATING CHANNEL
	AAP	2ND OUTPUT CHANNEL
	AAK	3RD INPUT CHANNEL
	AAE	3RD OPERATING CHANNEL
	AAQ	3RD OUTPUT CHANNEL
	AAL	4TH INPUT CHANNEL
	AAF	4TH OPERATING CHANNEL
	AAR	4TH OUTPUT CHANNEL
	AAS	5TH INPUT CHANNEL
	AAT	5TH OUTPUT CHANNEL
	AAU	6TH INPUT CHANNEL
	AAW	6TH OUTPUT CHANNEL
	AAV	7TH INPUT CHANNEL
	ABD	7TH OUTPUT CHANNEL
	ABA	8TH INPUT CHANNEL
	ABF	8TH OUTPUT CHANNEL
	ABB	9TH INPUT CHANNEL
	ABG	9TH OUTPUT CHANNEL
	AAG	INPUT CHANNEL
	AAB	OPERATING CHANNEL
	AAM	OUTPUT CHANNEL

ALBM*DOPERATING CONTROL METHOD

THE MEANS BY WHICH THE ITEM IS OPERATED OR CONTROLLED.

Enter the applicable reply code from the table below

(ALBMDAB*;ALBMDAF$DAF*)

Table 1
	Reply Code (AH20)	Reply
	AB	AUTOMATIC
	AF	MANUAL

AQZF*DCONTROL TYPE

INDICATES THE TYPE OF CONTROL.

Enter the applicable reply code from the table below

(AQZFDACK*;AQZFDAAY$DAAY*)

Table 1
	Reply Code (AL37)	Reply
	ACK	LOCAL
	AAY	REMOTE

BJBL*JINDICATOR DEVICE TYPE AND QUANTITY

INDICATES THE TYPE AND NUMBER OF INDICATOR DEVICE(S) INCLUDED.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.

(BJBLJAKD2*;BJBLJAKD2$$JAKD3*)

Table 1
	Reply Code (AJ12)	Reply
	AKB	AUDIBLE ALARM
	ADS	CATHODE RAY TUBE
	AKK	HEADSET
	ACE	LIGHT
	AKD	LOUDSPEAKER
	ACJ	METER

BJBM*BMAXIMUM CONTINUOUS OPERATING TIME IN HOURS

THE MAXIMUM TIME AN ITEM WILL CONTINUOUSLY RUN,EXPRESSED IN HOURS.

Enter a reply with a minimum of one digit on either side of the decimal point.

(BJBMB2.0)

AKAE*JMAXIMUM OPERATING ALTITUDE RATING

THE MAXIMUM ALTITUDE AT WHICH THE ITEM IS RATED TO FUNCTION.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AKAEJF2.0*)

Table 1
	Reply Code (AA05)	Reply
	F	FEET
	M	METERS

AFGA*JOPERATING TEMP RANGE

THE MINIMUM AND MAXIMUM LIMITS OF TEMPERATURE AT WHICH THE ITEM IS RATED FOR OPERATION.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.

(AFGAJCM32.0/P50.0*)

Table 1
	Reply Code (AB36)	Reply
	C	CELSIUS
	F	FAHRENHEIT

AECR*FVIBRATION RESISTANCE RANGE IN HERTZ

THE LOW AND HIGH FREQUENCIES OF VIBRATORY MOTION AND MECHANICAL STRESSES BETWEEN WHICH THE ITEM IS TESTED,OR OPERATED,WITHOUT DELETERIOUS EFFECT ON ITS ELECTRICAL OR MECHANICAL CHARACTERISTICS,EXPRESSED IN HERTZ.

Enter the range of numeric values with a minimum of one digit on both sides of the decimal. Separating range values with a slash and preceding negative values with an ‘M’ and positive values with a ‘P’.

(AECRFM2.0/P4.7*)

AFDN*JVIBRATION RESISTANCE AMPLITUDE

THE AMPLITUDE OF VIBRATION FOR WHICH THE VIBRATION RESISTANCE FREQUENCY RANGE APPLIES.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AFDNJB2.0*;AFDNJB2.0$$JB2.1*)

Table 1
	Reply Code (AD97)	Reply
	D	CENTIMETERS TOTAL EXCURSION
	B	GRAVITATIONAL UNITS
	C	INCHES TOTAL EXCURSION

AFDP*BSHOCK RESISTANCE RATING IN GRAVITATIONAL UNITS

THE MAXIMUM FORCE AT IMPACT THAT THE ITEM IS RATED TO WITHSTAND,WITHOUT RESULTING IN ANY PERMANENT CHANGE IN PHYSICAL OR ELECTRICAL CHARACTERISTICS,EXPRESSED IN GRAVITATIONAL UNITS /G'S/.

Enter a reply with a minimum of one digit on either side of the decimal point.

(AFDPB2.0)

BJBN*JSHOCK PULSE DURATION TIME

THE LENGTH OF TIME AFTER IMPACT THAT ESTABLISHED THE CONDITION AT WHICH THE SHOCK RESISTANCE RATING APPLIES.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BJBNJBK2.0*)

Table 1
	Reply Code (AB49)	Reply
	AL	MICROSECONDS
	BK	MILLISECONDS

BKFB*JEXTERNAL DC OPERATING VOLTAGE IN VOLTS

THE VALUE(S) OF THE POTENTIAL SUPPLIED FROM AN EXTERIOR DIRECT CURRENT SOURCE TO OPERATE THE ITEM,EXPRESSED IN VOLTS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BKFBJBAL2.0*;BKFBJBAL2.0$$JBAL2.1*)

Table 1
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

Table 2
	Reply Code (AD88)	Reply
	AM	10TH VOLTAGE
	AN	11TH VOLTAGE
	AP	12TH VOLTAGE
	AQ	13TH VOLTAGE
	AC	1ST VOLTAGE
	AD	2ND VOLTAGE
	AE	3RD VOLTAGE
	AF	4TH VOLTAGE
	AG	5TH VOLTAGE
	AH	6TH VOLTAGE
	AJ	7TH VOLTAGE
	AK	8TH VOLTAGE
	AL	9TH VOLTAGE
	AA	SINGLE VOLTAGE

BKFC*JEXTERNAL AC OPERATING VOLTAGE IN VOLTS

THE VALUE(S) OF THE POTENTIAL SUPPLIED FROM AN EXTERIOR ALTERNATING CURRENT SOURCE TO OPERATE THE ITEM,EXPRESSED IN VOLTS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BKFCJAAM2.0*;BKFCJAAM2.0$$JAAM2.1*)

Table 1
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

Table 2
	Reply Code (AD88)	Reply
	AM	10TH VOLTAGE
	AN	11TH VOLTAGE
	AP	12TH VOLTAGE
	AQ	13TH VOLTAGE
	AC	1ST VOLTAGE
	AD	2ND VOLTAGE
	AE	3RD VOLTAGE
	AF	4TH VOLTAGE
	AG	5TH VOLTAGE
	AH	6TH VOLTAGE
	AJ	7TH VOLTAGE
	AK	8TH VOLTAGE
	AL	9TH VOLTAGE
	AA	SINGLE VOLTAGE

BJBQ*JOPERATING AC FREQUENCY IN HERTZ

THE CYCLES PER SECOND /HERTZ/ OF THE OPERATING ALTERNATING CURRENT.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BJBQJCAP2.0*;BJBQJCAP2.0$$JCAP2.1*)

Table 1
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

Table 2
	Reply Code (AD88)	Reply
	AM	10TH VOLTAGE
	AN	11TH VOLTAGE
	AP	12TH VOLTAGE
	AQ	13TH VOLTAGE
	AC	1ST VOLTAGE
	AD	2ND VOLTAGE
	AE	3RD VOLTAGE
	AF	4TH VOLTAGE
	AG	5TH VOLTAGE
	AH	6TH VOLTAGE
	AJ	7TH VOLTAGE
	AK	8TH VOLTAGE
	AL	9TH VOLTAGE
	AA	SINGLE VOLTAGE

FAAZ*DPHASE

THE NUMBER OF ALTERNATING CURRENT PHASES.

Enter the applicable reply code from the table below

(FAAZDA*;FAAZDB$$DE*)

Table 1
	Reply Code (AD02)	Reply
	A	SINGLE
	E	SINGLE/THREE
	C	THREE
	B	TWO

BJBW*JCONNECTION CONTACT TYPE AND QUANTITY

INDICATES THE TYPE AND NUMBER OF CONTACT(S) INCLUDED IN THE CONNECTION.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit.

(BJBWJFECT2*;BJBWJFECT2$$JFECT3*)

Table 1
	Reply Code (AB76)	Reply
	SM	BINDING POST
	WK	CONNECTOR, PLUG
	FF	DUAL PANEL JACK
	WW	GROUND TERMINAL
	FA	INTEGRAL CABLE W/AUDIO PLUG
	FB	INTEGRAL CABLE W/COAXIAL PLUG
	FC	INTEGRAL CABLE W/POWER PLUG
	FD	INTEGRAL CORD W/POWER PLUG
	JM	PIN
	PB	PLAIN FLANGE
	FM	PRESSURIZED COAXIAL PLUG
	FN	PRESSURIZED COAXIAL SOCKET
	FL	PRINTED CIRCUIT
	FG	RECEPTACLE, AUDIO
	FH	RECEPTACLE, COAXIAL
	FJ	RECEPTACLE, POWER
	FE	SINGLE PANEL JACK
	PE	SOCKET
	RN	SOLDER LUG
	SQ	SOLDER STUD
	BU	SURFACE MOUNT
	FK	TERMINAL BLOCK W/SCREW
	SS	TERMINAL LUG
	ST	TERMINAL STUD
	RC	WIRE LEAD TERMINALS

Table 2
	Reply Code (AG81)	Reply
	CW	EXTERNAL
	CT	INTERNAL

BJBT*JMAXIMUM CONNECTION PRESSURE RATING

THE MAXIMUM RATED PRESSURE THAT A CONNECTION CAN WITHSTAND WITHOUT RUPTURE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BJBTJVSM2.0*;BJBTJVSM2.0$$JVSM2.1*)

Table 1
	Reply Code (AB18)	Reply
	K	KILOGRAMS PER SQUARE CENTIMETER
	V	POUNDS PER SQUARE INCH

Table 2
	Reply Code (AB76)	Reply
	SM	BINDING POST
	WK	CONNECTOR, PLUG
	FF	DUAL PANEL JACK
	WW	GROUND TERMINAL
	FA	INTEGRAL CABLE W/AUDIO PLUG
	FB	INTEGRAL CABLE W/COAXIAL PLUG
	FC	INTEGRAL CABLE W/POWER PLUG
	FD	INTEGRAL CORD W/POWER PLUG
	JM	PIN
	FM	PRESSURIZED COAXIAL PLUG
	FN	PRESSURIZED COAXIAL SOCKET
	FL	PRINTED CIRCUIT
	FG	RECEPTACLE, AUDIO
	FH	RECEPTACLE, COAXIAL
	FJ	RECEPTACLE, POWER
	FE	SINGLE PANEL JACK
	PE	SOCKET
	RN	SOLDER LUG
	SQ	SOLDER STUD
	BU	SURFACE MOUNT
	FK	TERMINAL BLOCK W/SCREW
	SS	TERMINAL LUG
	ST	TERMINAL STUD
	RC	WIRE LEAD TERMINALS

IF STYLE/REPLY CODE(s) CB OR CH WERE ENTERED FOR MRC ADZC, YOU MUST ANSWER MRC (AKAP)

ADZC*DENVIRONMENTAL PROTECTION

THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.

Enter the applicable reply code from the table below

(ADZCDBW*;ADZCDCC$$DCK*)

Table 1
	Reply Code (AA65)	Reply
	AB	ACID RESISTANT
	CM	DRIPTIGHT
	GL	DUST TIGHT
	BV	DUSTPROOF
	CS	ELECTRICALLY INSULATED
	AFC	ELECTROMAGNETICALLY SHIELDED
	BW	EXPLOSION PROOF
	GN	FUNGUS PROOF
	CV	GENERAL PURPOSE
	GS	MOISTURE PROOF
	CA	OIL TIGHT
	CH	PRESSURE PROOF
	CB	PRESSURIZED
	CJ	RAINTIGHT
	GW	SALT SPRAY RESISTANT
	HA	SHOCK RESISTANT
	CP	SPLASH PROOF
	CK	SUBMERSIBLE
	CC	VIBRATION
	BX	WATERTIGHT
	AR	WEATHERPROOF

AKAP*JPROOF PRESSURE

THE MAXIMUM PRESSURE THAT AN ITEM WILL WITHSTAND WITHOUT RESULTING IN ANY PERMANENT CHANGES IN ITS STRUCTURAL,MECHANICAL,OR ELECTRICAL CHARACTERISTICS. PLEASE USE MRC CQJB IN PLACE OF THIS DISCONTINUED MRC.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AKAPJV2.0*)

Table 1
	Reply Code (AB18)	Reply
	K	KILOGRAMS PER SQUARE CENTIMETER
	V	POUNDS PER SQUARE INCH

AJKH*GIDENTIFICATION DESIGNATOR

A DESIGNATION ASSIGNED TO THE ITEM FOR PURPOSE OF READY IDENTIFICATION. PLEASE USE MRC BTXN IN PLACE OF THIS DISCONTINUED MRC.

Enter clear text.

(AJKHGCLEARTEXT)

CBBL*DFEATURES PROVIDED

THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.

Enter the applicable reply code from the table below

(CBBLDAABS*;CBBLDAADS$$DAABT*)

Table 1
	Reply Code (AN47)	Reply
	AADS	AUTOMATIC GAIN CONTROL
	AABT	INTERNAL BATTERY ACCOMMODATION
	AABS	ZERO SHIFT CAPABILITY

IF STYLE/REPLY CODE(s) P WERE ENTERED FOR MRC RADC, YOU MUST ANSWER MRC (RADD)

RADC*DRADIOACTIVE CONTENT

AN INDICATION OF WHETHER OR NOT THE ITEM CONTAINS RADIOACTIVE MATERIALS.

Enter the applicable reply code from the table below

(RADCDP)

Table 1
	Reply Code (AN54)	Reply
	P	CONTAINS RADIOACTIVE MATERIAL

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

AARG*DRELIABILITY INDICATOR

AN INDICATION THAT THE LEVEL OF PROBABILITY THAT AN ITEM WILL OPERATE WITHOUT FAILURE,AT A SPECIFIED RATED CAPABILITY,AT A SPECIFIED TEMPERATURE,AND FOR A SPECIFIED PERIOD OF TIME,HAS BEEN ESTABLISHED BY TESTING RANDOM SAMPLES OF PRODUCTION LOT.

Enter the applicable reply code from the table below

(AARGDN)

Table 1
	Reply Code (AA61)	Reply
	E	ESTABLISHED
	N	NOT ESTABLISHED

ZZZW*GDEPARTURE FROM CITED DOCUMENT

THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.

Enter the reply in clear text.

(ZZZWGAS MODIFIED BY MATERIAL*)

ZZZX*GDEPARTURE FROM CITED DESIGNATOR

THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.

Enter the reply in clear text.

(ZZZXGAS MODIFIED BY MATERIAL*)

NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE

AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.

Enter the applicable reply code from the table below

(NHCFDCY)

Table 1
	Reply Code (AD05)	Reply
	CY	HARDENED

ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION

A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.

Enter the Reply Code from the table below.

(ELCDDA*)

Table 1
	Reply Code (AN58)	Reply
	A	ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD

BJBR*JMAXIMUM POWER DRAIN RATING

THE MAXIMUM POWER DRAIN FOR WHICH THE ITEM IS RATED.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BJBRJAT2.0*)

Table 1
	Reply Code (AB49)	Reply
	BC	KILOWATTS
	BZ	MILLIWATTS
	AT	WATTS

HUES*DCOLOR

A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.

Enter the applicable reply code from the table below

(HUESDLD0000)

Table 1
	Reply Code (AD06)	Reply
	BL0000	BLACK
	GY0000	GRAY/GREY
	NA0000	NATURAL
	LD0000	OLIVE DRAB

ABSW*DSURFACE LUSTER

THE APPEARANCE OF THE SURFACE OF AN ITEM AS TO ITS REFLECTING QUALITIES.

Enter the applicable reply code from the table below

(ABSWDJ)

Table 1
	Reply Code (AB46)	Reply
	G	HAMMERED
	B	MATTE
	A	MIRROR
	H	SCRATCH GRAIN
	J	WRINKLE

MARK*GSPECIAL MARKINGS

MARKINGS INCLUDED ON AN ITEM FOR THE PURPOSE OF OFFERING INSTRUCTIONS OR WARNINGS OR TO INDICATE THE PURPOSE, FUNCTION, OR APPLICATION OF THE ITEM. EXCLUDES MANUFACTURER'S PART NUMBERS, SYMBOLS, OR THE LIKE.

Enter clear text.

(MARKGCLEARTEXT)

BBRJ*DSPECIAL HANDLING FEATURE

THE UNUSUAL OR UNIQUE CHARACTERISTIC/S/ OR QUALITY/IES/ OF AN ITEM WHICH NECESSITATES THE ESTABLISHMENT OF A REQUIREMENT FOR SPECIAL HANDLING.

Enter the applicable reply code from the table below

(BBRJDAC)

Table 1
	Reply Code (AM83)	Reply
	AC	EXPLOSIVE
	AD	FLAMMABLE
	AE	FRAGILE
	AK	MAGNETIC
	AH	RADIOACTIVE

AFJN*DFRAGILITY FACTOR

THE MEASURE OF SENSITIVITY OF THE ITEM TO BE PACKAGED. A FACTOR USED BY PACKAGING ENGINEERS IN DEVISING PROPER CUSHIONING IN A PACKAGE.

Enter the applicable reply code from the table below

(AFJNDF)

Table 1
	Reply Code (AD40)	Reply
	D	DELICATE
	B	EXTREMELY FRAGILE
	E	MODERATELY DELICATE
	F	MODERATELY RUGGED
	G	RUGGED
	C	VERY DELICATE

BBRG*DSTORAGE TYPE

INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.

Enter the applicable reply code from the table below

(BBRGDAM)

Table 1
	Reply Code (AM81)	Reply
	A	ANY ACCEPTABLE
	AC	CLOSED SHED
	AD	CONTROLLED HUMIDITY WAREHOUSE
	AM	DEHUMIDIFIED WAREHOUSE
	AE	GENERAL PURPOSE WAREHOUSE
	AN	HEATED WAREHOUSE
	AH	OPEN SHED
	AJ	UNHEATED WAREHOUSE

RADD*JRADIONUCLIDES DATA

THE NAME AND AMOUNT OF THE RADIONUCLIDE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(RADDJJGAAHH2.0*)

Table 1
	Reply Code (AG67)	Reply
	JF	CURIES
	JH	MICROCURIES
	JG	MILLICURIES

Table 2
	Reply Code (AN55)	Reply
	AAAB	ACTINIUM (89) AC-227
	AAAC	ACTINIUM (89) AC-228
	AAAD	AMERICIUM (95) AM-241
	AAAE	AMERICIUM (95) AM-243
	AAAF	ANTIMONY (51) SB-122
	AAAG	ANTIMONY (51) SB-124
	AAAH	ANTIMONY (51) SB-125
	AAAJ	ARGON (18) AR-37
	AAAK	ARGON (18) AR-41
	AAAL	ARGON (18) AR-41, UNCOMPRESSED
	AAAM	ARSENIC (33) AS-73
	AAAN	ARSENIC (33) AS-74
	AAAP	ARSENIC (33) AS-76
	AAAQ	ARSENIC (33) AS-77
	AAAR	ASTATINE (85) AT-211
	AAAS	BARIUM (56) BA-131
	AAAT	BARIUM (56) BA-133
	AAAW	BARIUM (56) BA-140
	AAAX	BERKELIUM (97) BK-249
	AAAY	BERYLLIUM (4) BE-7
	AAAZ	BISMUTH (83) BI-206
	AABA	BISMUTH (83) BI-207
	AABB	BISMUTH (83) BI-210
	AABC	BISMUTH (83) BI-212
	AABD	BROMINE (35) BR-82
	AABE	CADMIUM (48) CD-109
	AABG	CADMIUM (48) CD-115
	AABF	CADMIUM (48) CD-115M
	AABH	CALCIUM (20) CA-45
	AABJ	CALCIUM (20) CA-47
	AABK	CALIFORNIUM /98/ CF-249
	AABL	CALIFORNIUM /98/ CF-250
	AABM	CALIFORNIUM /98/ CF-252
	AABN	CARBON (6) C-14
	AABP	CERIUM (58) CE-141
	AABQ	CERIUM (58) CE-143
	AABR	CERIUM (58) CE-144
	AABS	CESIUM (55) CS-131
	AABW	CESIUM (55) CS-134
	AABT	CESIUM (55) CS-134M
	AABX	CESIUM (55) CS-135
	AABY	CESIUM (55) CS-136
	AABZ	CESIUM (55) CS-137
	AACA	CHLORINE (17) CL-36
	AACB	CHLORINE (17) CL-38
	AACC	CHROMIUM (24) CR-51
	AACD	COBALT (27) CO-56
	AACE	COBALT (27) CO-57
	AACG	COBALT (27) CO-58
	AACF	COBALT (27) CO-58M
	AACH	COBALT (27) CO-60
	AACJ	COPPER (29) CU-64
	AACK	CURIUM (96) CM-242
	AACL	CURIUM (96) CM-243
	AACM	CURIUM (96) CM-244
	AACN	CURIUM (96) CM-245
	AACP	CURIUM (96) CM-246
	AACQ	DYSPROSIUM (66) DY-154
	AACR	DYSPROSIUM (66) DY-165
	AACS	DYSPROSIUM (66) DY-166
	AACT	ERBIUM (68) ER-169
	AACW	ERBIUM (68) ER-171
	AACX	EUROPIUM (63) EU-150
	AACZ	EUROPIUM (63) EU-152
	AACY	EUROPIUM (63) EU-152M
	AADA	EUROPIUM (63) EU-154
	AADB	EUROPIUM (63) EU-155
	AADC	FLUORINE (9) F-18
	AADD	GADOLINIUM (64) GD-153
	AADE	GADOLINIUM (64) GD-159
	AADF	GALLIUM (31) GA-67
	AADG	GALLIUM (31) GA-72
	AADH	GERMANIUM (32) GE-71
	AADJ	GOLD (79) AU-193
	AADK	GOLD (79) AU-194
	AADL	GOLD (79) AU-195
	AADM	GOLD (79) AU-196
	AADN	GOLD (79) AU-198
	AADP	GOLD (79) AU-199
	AADQ	HAFNIUM (72) HF-181
	AADR	HOLMIUM (67) HO-166
	AADS	INDIUM (49) IN-113M
	AADT	INDIUM (49) IN-114M
	AADX	INDIUM (49) IN-115
	AADW	INDIUM (49) IN-115M
	AADY	IODINE (53) I-124
	AADZ	IODINE (53) I-125
	AAEA	IODINE (53) I-126
	AAEB	IODINE (53) I-129
	AAEC	IODINE (53) I-131
	AAED	IODINE (53) I-132
	AAEE	IODINE (53) I-133
	AAEF	IODINE (53) I-134
	AAEG	IODINE (53) I-135
	AAEH	IRIDIUM (77) IR-190
	AAEJ	IRIDIUM (77) IR-192
	AAEK	IRIDIUM (77) IR-194
	AAEL	IRON (26) FE-55
	AAEM	IRON (26) FE-59
	AAEQ	KRYPTON (36) KR-85
	AAER	KRYPTON (36) KR-85, UNCOMPRESSED
	AAEN	KRYPTON (36) KR-85M
	AAEP	KRYPTON (36) KR-85M, UNCOMPRESSED
	AAES	KRYPTON (36) KR-87
	AAET	KRYPTON (36) KR-87, UNCOMPRESSED
	AAEW	LANTHANUM (57) LA-140
	AAEX	LEAD (82) PB-203
	AAEY	LEAD (82) PB-210
	AAEZ	LEAD (82) PB-212
	AAFA	LUTECIUM (71) LU-172
	AAFB	LUTECIUM (71) LU-177
	AAFC	MAGNESIUM (12) MG-28
	AAFD	MANGANESE (25) MN-52
	AAFE	MANGANESE (25) MN-54
	AAFF	MANGANESE (25) MN-56
	AAFH	MERCURY (80) HG-197
	AAFG	MERCURY (80) HG-197M
	AAFJ	MERCURY (80) HG-203
	AAFK	MIXED FISSION PRODUCTS MF-P
	AAFL	MOLYBDENUM (42) MO-99
	AAFM	NEODYMIUM (60) ND-147
	AAFN	NEODYMIUM (60) ND-149
	AAFP	NEPTUNIUM (93) NP-237
	AAFQ	NEPTUNIUM (93) NP-239
	AAFR	NICKEL (28) NI-56
	AAFS	NICKEL (28) NI-59
	AAFT	NICKEL (28) NI-63
	AAFW	NICKEL (28) NI-65
	AAFX	NIOBIUM (41) NB-93M
	AAFY	NIOBIUM (41) NB-95
	AAFZ	NIOBIUM (41) NB-97
	AAGA	OSMIUM (76) OS-185
	AAGC	OSMIUM (76) OS-191
	AAGB	OSMIUM (76) OS-191M
	AAGD	OSMIUM (76) OS-193
	AAGE	PALLADIUM (46) PD-103
	AAGF	PALLADIUM (46) PD-109
	AAGG	PHOSPHORUS (15) P-32
	AAGH	PLATINUM (78) PT-191
	AAGJ	PLATINUM (78) PT-193
	AAGK	PLATINUM (78) PT-193M
	AAGM	PLATINUM (78) PT-197
	AAGL	PLATINUM (78) PT-197M
	AAGN	PLUTONIUM (94) PU-238
	AAGP	PLUTONIUM (94) PU-239
	AAGQ	PLUTONIUM (94) PU-240
	AAGR	PLUTONIUM (94) PU-241
	AAGS	PLUTONIUM (94) PU-242
	AAGT	POLONIUM (84) PO-210
	AAGW	POTASSIUM (19) K-42
	AAGX	POTASSIUM (19) K-43
	AAGY	PRASEODYMIUM (59) PR-142
	AAGZ	PRASEODYMIUM (59) PR-143
	AAHA	PROMETHIUM (61) PM-147
	AAHB	PROMETHIUM (61) PM-149
	AAHC	PROTACTINIUM (91) PA-230
	AAHD	PROTACTINIUM (91) PA-231
	AAHE	PROTACTINIUM (91) PA-233
	AAHF	RADIUM (88) RA-223
	AAHG	RADIUM (88) RA-224
	AAHH	RADIUM (88) RA-226
	AAHJ	RADIUM (88) RA-228
	AAHK	RADON (86) RN-220
	AAHL	RADON (86) RN-222
	AAHM	RHENIUM (75) RE-183
	AAHN	RHENIUM (75) RE-186
	AAHP	RHENIUM (75) RE-187
	AAHQ	RHENIUM (75) RE-188
	AAHR	RHENIUM (75) RE-NATURAL
	AAHS	RHODIUM (45) RH-103M
	AAHT	RHODIUM (45) RH-105
	AAHW	RUBIDIUM (37) RB-86
	AAHX	RUBIDIUM (37) RB-87
	AAHY	RUBIDIUM (37) RB-NATURAL
	AAJA	RUTHENIUM (44) RU-103
	AAJB	RUTHENIUM (44) RU-105
	AAJC	RUTHENIUM (44) RU-106
	AAHZ	RUTHENIUM (44) RU-97
	AAJD	SAMARIUM (62) SM-145
	AAJE	SAMARIUM (62) SM-147
	AAJF	SAMARIUM (62) SM-151
	AAJG	SAMARIUM (62) SM-153
	AAJH	SCANDIUM (21) SC-46
	AAJJ	SCANDIUM (21) SC-47
	AAJK	SCANDIUM (21) SC-48
	AAJL	SELENIUM (34) SE-75
	AAJM	SILICON (14) SI-31
	AAJN	SILVER (47) AG-105
	AAJP	SILVER (47) AG-110M
	AAJQ	SILVER (47) AG-111
	AAJR	SODIUM (11) NA-22
	AAJS	SODIUM (11) NA-24
	AAJW	STRONTIUM (38) SR-85
	AAJT	STRONTIUM (38) SR-85M
	AAJX	STRONTIUM (38) SR-89
	AAJY	STRONTIUM (38) SR-90
	AAJZ	STRONTIUM (38) SR-91
	AAKA	STRONTIUM (38) SR-92
	AAKB	SULPHUR (16) S-35
	AAKC	TANTALUM (73) TA-182
	AAKE	TECHNETIUM (43) TC-96
	AAKD	TECHNETIUM (43) TC-96M
	AAKG	TECHNETIUM (43) TC-97
	AAKF	TECHNETIUM (43) TC-97M
	AAKJ	TECHNETIUM (43) TC-99
	AAKH	TECHNETIUM (43) TC-99M
	AAKK	TELLURIUM (52) TE-125M
	AAKM	TELLURIUM (52) TE-127
	AAKL	TELLURIUM (52) TE-127M
	AAKP	TELLURIUM (52) TE-129
	AAKN	TELLURIUM (52) TE-129M
	AAKQ	TELLURIUM (52) TE-131M
	AAKR	TELLURIUM (52) TE-132
	AAKS	TERBIUM (65) TB-160
	AAKT	THALLIUM (81) TL-200
	AAKW	THALLIUM (81) TL-201
	AAKX	THALLIUM (81) TL-202
	AAKY	THALLIUM (81) TL-204
	AAKZ	THORIUM (90) TH-227
	AALA	THORIUM (90) TH-228
	AALB	THORIUM (90) TH-230
	AALC	THORIUM (90) TH-231
	AALD	THORIUM (90) TH-232
	AALE	THORIUM (90) TH-234
	AALF	THORIUM (90) TH-NATURAL
	AALG	THULIUM (69) TM-168
	AALH	THULIUM (69) TM-170
	AALJ	THULIUM (69) TM-171
	AALK	TIN (50) SN-113
	AALL	TIN (50) SN-117M
	AALM	TIN (50) SN-121
	AALN	TIN (50) SN-125
	AALP	TRITIUM (1) H-3
	AALQ	TRITIUM (1) H-3 AS GAS, LUMINOUS PAINT, OR ADSORBED ON SOLID MATERIAL
	AALR	TUNGSTEN (74) W-181
	AALS	TUNGSTEN (74) W-185
	AALT	TUNGSTEN (74) W-187
	AALW	URANIUM (92) U-230
	AALX	URANIUM (92) U-232
	AALY	URANIUM (92) U-233
	AALZ	URANIUM (92) U-234
	AAMA	URANIUM (92) U-235
	AAMB	URANIUM (92) U-236
	AAMC	URANIUM (92) U-238
	AAMF	URANIUM (92) U-DEPLETED
	AAME	URANIUM (92) U-ENRICHED
	AAMD	URANIUM (92) U-NATURAL
	AAMG	VANADIUM (23) V-48
	AAMH	VANADIUM (23) V-49
	AAMJ	XENON (54) XE-125
	AAMK	XENON (54) XE-131M
	AAML	XENON (54) XE-131M, UNCOMPRESSED
	AAMM	XENON (54) XE-133
	AAMN	XENON (54) XE-133, UNCOMPRESSED
	AAMP	XENON (54) XE-135
	AAMQ	XENON (54) XE-135, UNCOMPRESSED
	AAMR	YTTERBIUM (70) YB-175
	AAMS	YTTRIUM (39) Y-88
	AAMT	YTTRIUM (39) Y-90
	AAMX	YTTRIUM (39) Y-91
	AAMW	YTTRIUM (39) Y-91M
	AAMY	YTTRIUM (39) Y-92
	AAMZ	YTTRIUM (39) Y-93
	AANA	ZINC (30) ZN-65
	AANC	ZINC (30) ZN-69
	AANB	ZINC (30) ZN-69M
	AAND	ZIRCONIUM (40) ZR-93
	AANE	ZIRCONIUM (40) ZR-95
	AANF	ZIRCONIUM (40) ZR-97

AFJQ*JSTORAGE TEMP RANGE

THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.

(AFJQJFM32.0/P50.0*)

Table 1
	Reply Code (AB36)	Reply
	C	CELSIUS
	F	FAHRENHEIT

PRMT*DPRECIOUS MATERIAL

IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.

Enter the applicable reply code from the table below

(PRMTDRTA000*;PRMTDAZA000$DRHA000*;PRMTDAZA000$$DRHA000*)

Table 1
	Reply Code (MA01)	Reply
	AUA000	GOLD
	IRA000	IRIDIUM
	AZA000	OSMIUM
	PDA000	PALLADIUM
	PTA000	PLATINUM
	RHA000	RHODIUM
	RTA000	RUTHENIUM
	AGA000	SILVER

PMWT*JPRECIOUS MATERIAL AND WEIGHT

AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(PMWTJPDA000E2.0*;PMWTJPDA000E2.0$JPDA000E2.0*;PMWTJPDA000E2.0$$JPDA000E2.1*)

Table 1
	Reply Code (MA01)	Reply
	AUA000	GOLD
	IRA000	IRIDIUM
	AZA000	OSMIUM
	PDA000	PALLADIUM
	PTA000	PLATINUM
	RHA000	RHODIUM
	RTA000	RUTHENIUM
	AGA000	SILVER

Table 2
	Reply Code (AG14)	Reply
	E	GRAINS, TROY
	R	GRAMS
	F	OUNCES, TROY

PMLC*JPRECIOUS MATERIAL AND LOCATION

AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.

Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.

(PMLCJAZA0002.0*;PMLCJAZA0002.0$JAZA0002.0*;PMLCJAZA0002.0$$JAZA0002.1*)

Table 1
	Reply Code (MA01)	Reply
	AUA000	GOLD
	IRA000	IRIDIUM
	AZA000	OSMIUM
	PDA000	PALLADIUM
	PTA000	PLATINUM
	RHA000	RHODIUM
	RTA000	RUTHENIUM
	AGA000	SILVER

Reply to this MRC in accordance with Volume 3.

AGAV*GEND ITEM IDENTIFICATION

THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.

Enter the reply in clear text.

(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)

SUPP*GSUPPLEMENTARY FEATURES

CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.

Enter the reply in clear text.Separate multiple replies with a semicolon.

(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)

FCLS*AFUNCTIONAL CLASSIFICATION

THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.

Enter the alpha-numeric reply with a minimum of one character.

(FCLSAB3)

FTLD*GFUNCTIONAL DESCRIPTION

DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.

Enter the reply from the applicable document.

(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)

TMDN*ATYPE/MODEL DESIGNATION

THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.

Enter the alpha-numeric reply with a minimum of one character.

(TMDNAF8)

RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT

INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.

Enter concise statement for similar item including name and identifying data.

RDAL*GREFERENCE DATA AND LITERATURE

LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.

Enter data appropriate and in a concise manner to identify informational references covering the item.

(RDALGNAAVAIROIA/VFK58 A-2.2.9*)

NTRD*AENTRY DATE

INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.

Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.

(NTRDA80-05-28*)

This MRC replaced MRC ZZZP

The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.

PDNB*APURCHASE DESCRIPTION IDENTIFICATION

THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.

Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.

(ZZZPJ81A37-30624A*)

ZZZV*GFSC APPLICATION DATA

THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.

Enter the name of the next higher classifiable assembly in clear text.

(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)

HZRD*DHAZARDOUS SUBSTANCES

THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.

Enter the applicable reply code from the table below

(HZRDDHAZ035)

Table 1
	Reply Code (HZ00)	Reply
	HAZ035	RADIOACTIVE

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY

THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.

Enter the reply in clear text.

(CXCYGLINE PROCESSOR CONTROL BOARD*)

MATT*DMATERIAL

THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(MATT3ACEDSTB000*;MATT3ACEDSTB000$DSTA000*;MATT3ACEDSTB000$$DSTA000*)

Table 1
	ISAC Field Indicator (5000)	Location
	3ACE	INCLOSURE
	3AEE	OVERALL
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (MA01)	Reply
	ALA000	ALUMINUM
	CUB000	COPPER ALLOY
	PCA000	PLASTIC
	STA000	STEEL
	STB000	STEEL CORROSION RESISTING

CBME*JCUBIC MEASURE

A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CBMEJCC2.0*)

Table 1
	Reply Code (AN76)	Reply
	CC	CUBIC CENTIMETERS
	CN	CUBIC INCHES

AWLS*DCONNECTION TYPE

INDICATES THE TYPE OF CONNECTION/S/.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(AWLS3FAHDAQV*;AWLS3FAHDAQV$DAET*;AWLS3FAHDAQV$$DAET*)

Table 1
	ISAC Field Indicator (5000)	Location
	3ABK	TOP
	3ACR	END
	3AEE	OVERALL
	3ALJ	BOTTOM
	3AUA	FRONT
	3AUK	LEFT SIDE
	3AVB	RIGHT SIDE
	3FAH	CONNECTOR
	3HCB	REAR
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (AB76)	Reply
	AET	AUDIO RECEPTACLE
	ADR	COAXIAL RECEPTACLE
	ALA	GROUND TERMINAL
	ALR	INTEGRAL CABLE W/AUDIO PLUG
	ALS	INTEGRAL CABLE W/COAXIAL PLUG
	ALT	INTEGRAL CABLE W/POWER PLUG
	APU	PIN
	ADQ	PLUG CONNECTOR
	ADS	POWER RECEPTACLE
	AQU	PRESSURIZED COAXIAL PLUG
	AQV	PRESSURIZED COAXIAL SOCKET
	ASH	SINGLE PANEL JACK
	ATB	SOLDER LUG
	ATD	SOLDER STUD
	ADD	SUBMINIATURE VERSION A (SMA) CONNECTOR
	AUS	TERMINAL LUG
	AUT	TERMINAL STUD
	AWP	WIRE LEAD TERMINALS

CLQL*GCOLLOQUIAL NAME

A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.

Enter the reply in clear text.

(CLQLGWOVEN WIRE CLOTH*)