A gear, cylindrical in form, with spiral teeth designed to mesh with the thread forms of a GEAR (1), WORM. See also GEAR, ANTIBACKLASH, WORM WHEEL.
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3ACK added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AVU added to MRC MATT.
ISAC Reply 3CYK added to MRC MATT.
ISAC Reply 3EDW added to MRC MATT.
ISAC Reply 3EEB added to MRC MATT.
ISAC Reply 3EEC added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 1F deleted from MRC MATT.
ISAC Reply 1G deleted from MRC MATT.
ISAC Reply 1H deleted from MRC MATT.
ISAC Reply 1J deleted from MRC MATT.
ISAC Reply 1K deleted from MRC MATT.
ISAC Reply 1L deleted from MRC MATT.
ISAC Reply 1M deleted from MRC MATT.
ISAC Reply 1N deleted from MRC MATT.
ISAC Reply 1P deleted from MRC MATT.
ISAC Reply 1Q deleted from MRC MATT.
ISAC Reply 1R deleted from MRC MATT.
ISAC Reply 1S deleted from MRC MATT.
ISAC Reply 3AAT added to MRC MDCL.
ISAC Reply 3ACK added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3AVU added to MRC MDCL.
ISAC Reply 3CYK added to MRC MDCL.
ISAC Reply 3EDW added to MRC MDCL.
ISAC Reply 3EEB added to MRC MDCL.
ISAC Reply 3EEC added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 1A deleted from MRC MDCL.
ISAC Reply 1B deleted from MRC MDCL.
ISAC Reply 1C deleted from MRC MDCL.
ISAC Reply 1D deleted from MRC MDCL.
ISAC Reply 1E deleted from MRC MDCL.
ISAC Reply 1F deleted from MRC MDCL.
ISAC Reply 1G deleted from MRC MDCL.
ISAC Reply 1H deleted from MRC MDCL.
ISAC Reply 1J deleted from MRC MDCL.
ISAC Reply 1K deleted from MRC MDCL.
ISAC Reply 1L deleted from MRC MDCL.
ISAC Reply 1M deleted from MRC MDCL.
ISAC Reply 1N deleted from MRC MDCL.
ISAC Reply 1P deleted from MRC MDCL.
ISAC Reply 1Q deleted from MRC MDCL.
ISAC Reply 1R deleted from MRC MDCL.
ISAC Reply 1S deleted from MRC MDCL.
ISAC Reply 3AEE added to MRC CWQL.
ISAC Reply 3AET added to MRC CWQL.
ISAC Reply 3AEU added to MRC CWQL.
ISAC Reply 3AEV added to MRC CWQL.
ISAC Reply 3EER added to MRC CWQL.
ISAC Reply 3HOU added to MRC CWQL.
ISAC Reply 1A deleted from MRC CWQL.
ISAC Reply 1B deleted from MRC CWQL.
ISAC Reply 1C deleted from MRC CWQL.
ISAC Reply 1D deleted from MRC CWQL.
ISAC Reply 1E deleted from MRC CWQL.
ISAC Reply 1F deleted from MRC CWQL.
ISAC Reply 1G deleted from MRC CWQL.
ISAC Reply 1H deleted from MRC CWQL.
ISAC Reply 1J deleted from MRC CWQL.
ISAC Reply 1K deleted from MRC CWQL.
ISAC Reply 3AEE added to MRC CWQR.
ISAC Reply 3AET added to MRC CWQR.
ISAC Reply 3AEU added to MRC CWQR.
ISAC Reply 3AEV added to MRC CWQR.
ISAC Reply 3HOU added to MRC CWQR.
ISAC Reply 1A deleted from MRC CWQR.
ISAC Reply 1B deleted from MRC CWQR.
ISAC Reply 1C deleted from MRC CWQR.
ISAC Reply 1D deleted from MRC CWQR.
ISAC Reply 1E deleted from MRC CWQR.
ISAC Reply 1F deleted from MRC CWQR.
ISAC Reply 1G deleted from MRC CWQR.
ISAC Reply 1H deleted from MRC CWQR.
ISAC Reply 1J deleted from MRC CWQR.
ISAC Reply 1K deleted from MRC CWQR.
ISAC Reply 3AEE added to MRC CWRB.
ISAC Reply 3AET added to MRC CWRB.
ISAC Reply 3AEU added to MRC CWRB.
ISAC Reply 3AEV added to MRC CWRB.
ISAC Reply 3EER added to MRC CWRB.
ISAC Reply 3EEX added to MRC CWRB.
ISAC Reply 3HOU added to MRC CWRB.
ISAC Reply 1A deleted from MRC CWRB.
ISAC Reply 1B deleted from MRC CWRB.
ISAC Reply 1C deleted from MRC CWRB.
ISAC Reply 1D deleted from MRC CWRB.
ISAC Reply 1E deleted from MRC CWRB.
ISAC Reply 1F deleted from MRC CWRB.
ISAC Reply 1G deleted from MRC CWRB.
ISAC Reply 1H deleted from MRC CWRB.
ISAC Reply 1J deleted from MRC CWRB.
ISAC Reply 1K deleted from MRC CWRB.
ISAC Reply 3AEE added to MRC CWRF.
ISAC Reply 3AEV added to MRC CWRF.
ISAC Reply 3EEX added to MRC CWRF.
ISAC Reply 3HOU added to MRC CWRF.
ISAC Reply 1A deleted from MRC CWRF.
ISAC Reply 1B deleted from MRC CWRF.
ISAC Reply 1C deleted from MRC CWRF.
ISAC Reply 1D deleted from MRC CWRF.
ISAC Reply 1E deleted from MRC CWRF.
ISAC Reply 1F deleted from MRC CWRF.
ISAC Reply 1G deleted from MRC CWRF.
ISAC Reply 1H deleted from MRC CWRF.
ISAC Reply 1J deleted from MRC CWRF.
ISAC Reply 1K deleted from MRC CWRF.
ISAC Reply 3AEE added to MRC CWRK.
ISAC Reply 3AET added to MRC CWRK.
ISAC Reply 3HOU added to MRC CWRK.
ISAC Reply 1A deleted from MRC CWRK.
ISAC Reply 1B deleted from MRC CWRK.
ISAC Reply 1C deleted from MRC CWRK.
ISAC Reply 1D deleted from MRC CWRK.
ISAC Reply 1E deleted from MRC CWRK.
ISAC Reply 1F deleted from MRC CWRK.
ISAC Reply 1G deleted from MRC CWRK.
ISAC Reply 1H deleted from MRC CWRK.
ISAC Reply 1J deleted from MRC CWRK.
ISAC Reply 1K deleted from MRC CWRK.
ISAC Reply 3AEE added to MRC CWRP.
ISAC Reply 3AET added to MRC CWRP.
ISAC Reply 3HOU added to MRC CWRP.
ISAC Reply 1A deleted from MRC CWRP.
ISAC Reply 1B deleted from MRC CWRP.
ISAC Reply 1C deleted from MRC CWRP.
ISAC Reply 1D deleted from MRC CWRP.
ISAC Reply 1E deleted from MRC CWRP.
ISAC Reply 1F deleted from MRC CWRP.
ISAC Reply 1G deleted from MRC CWRP.
ISAC Reply 1H deleted from MRC CWRP.
ISAC Reply 1J deleted from MRC CWRP.
ISAC Reply 1K deleted from MRC CWRP.
ISAC Reply 3AEE added to MRC STDC.
ISAC Reply 3AEE added to MRC STDC.
ISAC Reply 3AVU added to MRC STDC.
ISAC Reply 3AVU added to MRC STDC.
ISAC Reply 3HOU added to MRC STDC.
ISAC Reply 3HOU added to MRC STDC.
ISAC Reply 1A deleted from MRC STDC.
ISAC Reply 1B deleted from MRC STDC.
ISAC Reply 1C deleted from MRC STDC.
ISAC Reply 1D deleted from MRC STDC.
ISAC Reply 1E deleted from MRC STDC.
ISAC Reply 1F deleted from MRC STDC.
ISAC Reply 1G deleted from MRC STDC.
ISAC Reply 1H deleted from MRC STDC.
ISAC Reply 1J deleted from MRC STDC.
ISAC Reply 1K deleted from MRC STDC.
ISAC Reply 1L deleted from MRC STDC.
ISAC Reply 1M deleted from MRC STDC.
ISAC Reply 1N deleted from MRC STDC.
ISAC Reply 1P deleted from MRC STDC.
ISAC Reply 1Q deleted from MRC STDC.
ISAC Reply 1R deleted from MRC STDC.
ISAC Reply 1S deleted from MRC STDC.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3AVU added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1C deleted from MRC SFTT.
ISAC Reply 1D deleted from MRC SFTT.
ISAC Reply 1E deleted from MRC SFTT.
ISAC Reply 1F deleted from MRC SFTT.
ISAC Reply 1G deleted from MRC SFTT.
ISAC Reply 1H deleted from MRC SFTT.
ISAC Reply 1J deleted from MRC SFTT.
ISAC Reply 1K deleted from MRC SFTT.
ISAC Reply 1L deleted from MRC SFTT.
ISAC Reply 1M deleted from MRC SFTT.
ISAC Reply 1N deleted from MRC SFTT.
ISAC Reply 1P deleted from MRC SFTT.
ISAC Reply 1Q deleted from MRC SFTT.
ISAC Reply 1R deleted from MRC SFTT.
ISAC Reply 1S deleted from MRC SFTT.
ISAC Reply 3AEE added to MRC CQFM.
ISAC Reply 3CYK added to MRC CQFM.
ISAC Reply 3EEC added to MRC CQFM.
ISAC Reply 3HOU added to MRC CQFM.
ISAC Reply 1A deleted from MRC CQFM.
ISAC Reply 1B deleted from MRC CQFM.
ISAC Reply 1C deleted from MRC CQFM.
ISAC Reply 1D deleted from MRC CQFM.
ISAC Reply 1E deleted from MRC CQFM.
ISAC Reply 1F deleted from MRC CQFM.
ISAC Reply 1G deleted from MRC CQFM.
ISAC Reply 1H deleted from MRC CQFM.
ISAC Reply 1J deleted from MRC CQFM.
ISAC Reply 1K deleted from MRC CQFM.
ISAC Reply 1L deleted from MRC CQFM.
ISAC Reply 1M deleted from MRC CQFM.
ISAC Reply 1N deleted from MRC CQFM.
ISAC Reply 1P deleted from MRC CQFM.
ISAC Reply 1Q deleted from MRC CQFM.
ISAC Reply 1R deleted from MRC CQFM.
ISAC Reply 1S deleted from MRC CQFM.
ISAC Reply 3AEE added to MRC ANTP.
ISAC Reply 3AET added to MRC ANTP.
ISAC Reply 3AEU added to MRC ANTP.
ISAC Reply 3AEV added to MRC ANTP.
ISAC Reply 3EER added to MRC ANTP.
ISAC Reply 3EEW added to MRC ANTP.
ISAC Reply 3EEX added to MRC ANTP.
ISAC Reply 3HOU added to MRC ANTP.
ISAC Reply 1A deleted from MRC ANTP.
ISAC Reply 1B deleted from MRC ANTP.
ISAC Reply 1C deleted from MRC ANTP.
ISAC Reply 1D deleted from MRC ANTP.
ISAC Reply 1E deleted from MRC ANTP.
ISAC Reply 1F deleted from MRC ANTP.
ISAC Reply 1G deleted from MRC ANTP.
ISAC Reply 1H deleted from MRC ANTP.
ISAC Reply 1J deleted from MRC ANTP.
ISAC Reply 1K deleted from MRC ANTP.
ISAC Reply 3AEE added to MRC CWRS.
ISAC Reply 3AET added to MRC CWRS.
ISAC Reply 3AEU added to MRC CWRS.
ISAC Reply 3AEV added to MRC CWRS.
ISAC Reply 3EER added to MRC CWRS.
ISAC Reply 3EEW added to MRC CWRS.
ISAC Reply 3EEX added to MRC CWRS.
ISAC Reply 3HOU added to MRC CWRS.
ISAC Reply 1A deleted from MRC CWRS.
ISAC Reply 1B deleted from MRC CWRS.
ISAC Reply 1C deleted from MRC CWRS.
ISAC Reply 1D deleted from MRC CWRS.
ISAC Reply 1E deleted from MRC CWRS.
ISAC Reply 1F deleted from MRC CWRS.
ISAC Reply 1G deleted from MRC CWRS.
ISAC Reply 1H deleted from MRC CWRS.
ISAC Reply 1J deleted from MRC CWRS.
ISAC Reply 1K deleted from MRC CWRS.
ISAC Reply 3AEE added to MRC CWRX.
ISAC Reply 3AET added to MRC CWRX.
ISAC Reply 3AEV added to MRC CWRX.
ISAC Reply 3HOU added to MRC CWRX.
ISAC Reply 1A deleted from MRC CWRX.
ISAC Reply 1B deleted from MRC CWRX.
ISAC Reply 1C deleted from MRC CWRX.
ISAC Reply 1D deleted from MRC CWRX.
ISAC Reply 1E deleted from MRC CWRX.
ISAC Reply 1F deleted from MRC CWRX.
ISAC Reply 1G deleted from MRC CWRX.
ISAC Reply 1H deleted from MRC CWRX.
ISAC Reply 1J deleted from MRC CWRX.
ISAC Reply 1K deleted from MRC CWRX.
ISAC Reply 3AEE added to MRC CWSB.
ISAC Reply 3AEV added to MRC CWSB.
ISAC Reply 3HOU added to MRC CWSB.
ISAC Reply 1A deleted from MRC CWSB.
ISAC Reply 1B deleted from MRC CWSB.
ISAC Reply 1C deleted from MRC CWSB.
ISAC Reply 1D deleted from MRC CWSB.
ISAC Reply 1E deleted from MRC CWSB.
ISAC Reply 1F deleted from MRC CWSB.
ISAC Reply 1G deleted from MRC CWSB.
ISAC Reply 1H deleted from MRC CWSB.
ISAC Reply 1J deleted from MRC CWSB.
ISAC Reply 1K deleted from MRC CWSB.
ISAC Reply 1A deleted from MRC CWSF.
ISAC Reply 1B deleted from MRC CWSF.
ISAC Reply 1C deleted from MRC CWSF.
ISAC Reply 1D deleted from MRC CWSF.
ISAC Reply 1E deleted from MRC CWSF.
ISAC Reply 1F deleted from MRC CWSF.
ISAC Reply 1G deleted from MRC CWSF.
ISAC Reply 1H deleted from MRC CWSF.
ISAC Reply 1J deleted from MRC CWSF.
ISAC Reply 1K deleted from MRC CWSF.
ISAC Reply 3AEE added to MRC CWCN.
ISAC Reply 3AEV added to MRC CWCN.
ISAC Reply 3HOU added to MRC CWCN.
ISAC Reply 1A deleted from MRC CWCN.
ISAC Reply 1B deleted from MRC CWCN.
ISAC Reply 1C deleted from MRC CWCN.
ISAC Reply 1D deleted from MRC CWCN.
ISAC Reply 1E deleted from MRC CWCN.
ISAC Reply 1F deleted from MRC CWCN.
ISAC Reply 1G deleted from MRC CWCN.
ISAC Reply 1H deleted from MRC CWCN.
ISAC Reply 1J deleted from MRC CWCN.
ISAC Reply 1K deleted from MRC CWCN.
ISAC Reply 3AEE added to MRC ABSA.
ISAC Reply 3AET added to MRC ABSA.
ISAC Reply 3AEU added to MRC ABSA.
ISAC Reply 3AEV added to MRC ABSA.
ISAC Reply 3EER added to MRC ABSA.
ISAC Reply 3HOU added to MRC ABSA.
ISAC Reply 1A deleted from MRC ABSA.
ISAC Reply 1B deleted from MRC ABSA.
ISAC Reply 1C deleted from MRC ABSA.
ISAC Reply 1D deleted from MRC ABSA.
ISAC Reply 1E deleted from MRC ABSA.
ISAC Reply 1F deleted from MRC ABSA.
ISAC Reply 1G deleted from MRC ABSA.
ISAC Reply 1H deleted from MRC ABSA.
ISAC Reply 1J deleted from MRC ABSA.
ISAC Reply 1K deleted from MRC ABSA.
ISAC Reply 3AEE added to MRC BDTX.
ISAC Reply 3AET added to MRC BDTX.
ISAC Reply 3AEV added to MRC BDTX.
ISAC Reply 3HOU added to MRC BDTX.
ISAC Reply 1A deleted from MRC BDTX.
ISAC Reply 1B deleted from MRC BDTX.
ISAC Reply 1C deleted from MRC BDTX.
ISAC Reply 1D deleted from MRC BDTX.
ISAC Reply 1E deleted from MRC BDTX.
ISAC Reply 1F deleted from MRC BDTX.
ISAC Reply 1G deleted from MRC BDTX.
ISAC Reply 1H deleted from MRC BDTX.
ISAC Reply 1J deleted from MRC BDTX.
ISAC Reply 1K deleted from MRC BDTX.
ISAC Reply 3AEE added to MRC ADDW.
ISAC Reply 3AEV added to MRC ADDW.
ISAC Reply 3HOU added to MRC ADDW.
ISAC Reply 1A deleted from MRC ADDW.
ISAC Reply 1B deleted from MRC ADDW.
ISAC Reply 1C deleted from MRC ADDW.
ISAC Reply 1D deleted from MRC ADDW.
ISAC Reply 1E deleted from MRC ADDW.
ISAC Reply 1F deleted from MRC ADDW.
ISAC Reply 1G deleted from MRC ADDW.
ISAC Reply 1H deleted from MRC ADDW.
ISAC Reply 1J deleted from MRC ADDW.
ISAC Reply 1K deleted from MRC ADDW.
ISAC Reply 3AEE added to MRC BDYK.
ISAC Reply 3AEV added to MRC BDYK.
ISAC Reply 3HOU added to MRC BDYK.
ISAC Reply 1A deleted from MRC BDYK.
ISAC Reply 1B deleted from MRC BDYK.
ISAC Reply 1C deleted from MRC BDYK.
ISAC Reply 1D deleted from MRC BDYK.
ISAC Reply 1E deleted from MRC BDYK.
ISAC Reply 1F deleted from MRC BDYK.
ISAC Reply 1G deleted from MRC BDYK.
ISAC Reply 1H deleted from MRC BDYK.
ISAC Reply 1J deleted from MRC BDYK.
ISAC Reply 1K deleted from MRC BDYK.
ISAC Reply 3AEE added to MRC CWSN.
ISAC Reply 3AET added to MRC CWSN.
ISAC Reply 3AEU added to MRC CWSN.
ISAC Reply 3AEV added to MRC CWSN.
ISAC Reply 3EER added to MRC CWSN.
ISAC Reply 3EEW added to MRC CWSN.
ISAC Reply 3HOU added to MRC CWSN.
ISAC Reply 1A deleted from MRC CWSN.
ISAC Reply 1B deleted from MRC CWSN.
ISAC Reply 1C deleted from MRC CWSN.
ISAC Reply 1D deleted from MRC CWSN.
ISAC Reply 1E deleted from MRC CWSN.
ISAC Reply 1F deleted from MRC CWSN.
ISAC Reply 1G deleted from MRC CWSN.
ISAC Reply 1H deleted from MRC CWSN.
ISAC Reply 1J deleted from MRC CWSN.
ISAC Reply 1K deleted from MRC CWSN.
ISAC Reply 3AEE added to MRC CWSR.
ISAC Reply 3AET added to MRC CWSR.
ISAC Reply 3AEU added to MRC CWSR.
ISAC Reply 3AEV added to MRC CWSR.
ISAC Reply 3EER added to MRC CWSR.
ISAC Reply 3EEW added to MRC CWSR.
ISAC Reply 3HOU added to MRC CWSR.
ISAC Reply 1A deleted from MRC CWSR.
ISAC Reply 1B deleted from MRC CWSR.
ISAC Reply 1C deleted from MRC CWSR.
ISAC Reply 1D deleted from MRC CWSR.
ISAC Reply 1E deleted from MRC CWSR.
ISAC Reply 1F deleted from MRC CWSR.
ISAC Reply 1G deleted from MRC CWSR.
ISAC Reply 1H deleted from MRC CWSR.
ISAC Reply 1J deleted from MRC CWSR.
ISAC Reply 1K deleted from MRC CWSR.
ISAC Reply 3AEE added to MRC CWSW.
ISAC Reply 3AET added to MRC CWSW.
ISAC Reply 3AEU added to MRC CWSW.
ISAC Reply 3AEV added to MRC CWSW.
ISAC Reply 3EEW added to MRC CWSW.
ISAC Reply 3HOU added to MRC CWSW.
ISAC Reply 1A deleted from MRC CWSW.
ISAC Reply 1B deleted from MRC CWSW.
ISAC Reply 1C deleted from MRC CWSW.
ISAC Reply 1D deleted from MRC CWSW.
ISAC Reply 1E deleted from MRC CWSW.
ISAC Reply 1F deleted from MRC CWSW.
ISAC Reply 1G deleted from MRC CWSW.
ISAC Reply 1H deleted from MRC CWSW.
ISAC Reply 1J deleted from MRC CWSW.
ISAC Reply 1K deleted from MRC CWSW.
ISAC Reply 3AEE added to MRC CWTB.
ISAC Reply 3AET added to MRC CWTB.
ISAC Reply 3AEU added to MRC CWTB.
ISAC Reply 3AEV added to MRC CWTB.
ISAC Reply 3EES added to MRC CWTB.
ISAC Reply 3EET added to MRC CWTB.
ISAC Reply 3EEW added to MRC CWTB.
ISAC Reply 3EEX added to MRC CWTB.
ISAC Reply 3HOU added to MRC CWTB.
ISAC Reply 1A deleted from MRC CWTB.
ISAC Reply 1B deleted from MRC CWTB.
ISAC Reply 1C deleted from MRC CWTB.
ISAC Reply 1D deleted from MRC CWTB.
ISAC Reply 1E deleted from MRC CWTB.
ISAC Reply 1F deleted from MRC CWTB.
ISAC Reply 1G deleted from MRC CWTB.
ISAC Reply 1H deleted from MRC CWTB.
ISAC Reply 1J deleted from MRC CWTB.
ISAC Reply 1K deleted from MRC CWTB.
ISAC Reply 3AEE added to MRC CWTG.
ISAC Reply 3AET added to MRC CWTG.
ISAC Reply 3AEU added to MRC CWTG.
ISAC Reply 3AEV added to MRC CWTG.
ISAC Reply 3EES added to MRC CWTG.
ISAC Reply 3EET added to MRC CWTG.
ISAC Reply 3EEV added to MRC CWTG.
ISAC Reply 3EEW added to MRC CWTG.
ISAC Reply 3EEX added to MRC CWTG.
ISAC Reply 3HOU added to MRC CWTG.
ISAC Reply 1A deleted from MRC CWTG.
ISAC Reply 1B deleted from MRC CWTG.
ISAC Reply 1C deleted from MRC CWTG.
ISAC Reply 1D deleted from MRC CWTG.
ISAC Reply 1E deleted from MRC CWTG.
ISAC Reply 1F deleted from MRC CWTG.
ISAC Reply 1G deleted from MRC CWTG.
ISAC Reply 1H deleted from MRC CWTG.
ISAC Reply 1J deleted from MRC CWTG.
ISAC Reply 1K deleted from MRC CWTG.
ISAC Reply 3AEE added to MRC THSD.
ISAC Reply 3AET added to MRC THSD.
ISAC Reply 3AEU added to MRC THSD.
ISAC Reply 3AEV added to MRC THSD.
ISAC Reply 3EER added to MRC THSD.
ISAC Reply 3HOU added to MRC THSD.
ISAC Reply 1A deleted from MRC THSD.
ISAC Reply 1B deleted from MRC THSD.
ISAC Reply 1C deleted from MRC THSD.
ISAC Reply 1D deleted from MRC THSD.
ISAC Reply 1E deleted from MRC THSD.
ISAC Reply 1F deleted from MRC THSD.
ISAC Reply 1G deleted from MRC THSD.
ISAC Reply 1H deleted from MRC THSD.
ISAC Reply 1J deleted from MRC THSD.
ISAC Reply 1K deleted from MRC THSD.
ISAC Reply 3AEE added to MRC CQJX.
ISAC Reply 3AEE added to MRC CQJX.
ISAC Reply 3AET added to MRC CQJX.
ISAC Reply 3AET added to MRC CQJX.
ISAC Reply 3AEU added to MRC CQJX.
ISAC Reply 3AEU added to MRC CQJX.
ISAC Reply 3AEV added to MRC CQJX.
ISAC Reply 3AEV added to MRC CQJX.
ISAC Reply 3EER added to MRC CQJX.
ISAC Reply 3EER added to MRC CQJX.
ISAC Reply 3HOU added to MRC CQJX.
ISAC Reply 3HOU added to MRC CQJX.
ISAC Reply 1A deleted from MRC CQJX.
ISAC Reply 1B deleted from MRC CQJX.
ISAC Reply 1C deleted from MRC CQJX.
ISAC Reply 1D deleted from MRC CQJX.
ISAC Reply 1E deleted from MRC CQJX.
ISAC Reply 1F deleted from MRC CQJX.
ISAC Reply 1G deleted from MRC CQJX.
ISAC Reply 1H deleted from MRC CQJX.
ISAC Reply 1J deleted from MRC CQJX.
ISAC Reply 1K deleted from MRC CQJX.
ISAC Reply 3AEE added to MRC CMLP.
ISAC Reply 3AEU added to MRC CMLP.
ISAC Reply 3EER added to MRC CMLP.
ISAC Reply 3HOU added to MRC CMLP.
ISAC Reply 1A deleted from MRC CMLP.
ISAC Reply 1B deleted from MRC CMLP.
ISAC Reply 1C deleted from MRC CMLP.
ISAC Reply 1D deleted from MRC CMLP.
ISAC Reply 1E deleted from MRC CMLP.
ISAC Reply 1F deleted from MRC CMLP.
ISAC Reply 1G deleted from MRC CMLP.
ISAC Reply 1H deleted from MRC CMLP.
ISAC Reply 1J deleted from MRC CMLP.
ISAC Reply 1K deleted from MRC CMLP.
ISAC Reply 3AEE added to MRC CQQR.
ISAC Reply 3AEE added to MRC CQQR.
ISAC Reply 3AET added to MRC CQQR.
ISAC Reply 3AET added to MRC CQQR.
ISAC Reply 3HOU added to MRC CQQR.
ISAC Reply 3HOU added to MRC CQQR.
ISAC Reply 1A deleted from MRC CQQR.
ISAC Reply 1B deleted from MRC CQQR.
ISAC Reply 1C deleted from MRC CQQR.
ISAC Reply 1D deleted from MRC CQQR.
ISAC Reply 1E deleted from MRC CQQR.
ISAC Reply 1F deleted from MRC CQQR.
ISAC Reply 1G deleted from MRC CQQR.
ISAC Reply 1H deleted from MRC CQQR.
ISAC Reply 1J deleted from MRC CQQR.
ISAC Reply 1K deleted from MRC CQQR.
ISAC Reply 3AEE added to MRC AAJD.
ISAC Reply 3AEU added to MRC AAJD.
ISAC Reply 3AEV added to MRC AAJD.
ISAC Reply 3EER added to MRC AAJD.
ISAC Reply 3HOU added to MRC AAJD.
ISAC Reply 1A deleted from MRC AAJD.
ISAC Reply 1B deleted from MRC AAJD.
ISAC Reply 1C deleted from MRC AAJD.
ISAC Reply 1D deleted from MRC AAJD.
ISAC Reply 1E deleted from MRC AAJD.
ISAC Reply 1F deleted from MRC AAJD.
ISAC Reply 1G deleted from MRC AAJD.
ISAC Reply 1H deleted from MRC AAJD.
ISAC Reply 1J deleted from MRC AAJD.
ISAC Reply 1K deleted from MRC AAJD.
ISAC Reply 3AEE added to MRC CTTC.
ISAC Reply 3AET added to MRC CTTC.
ISAC Reply 3HOU added to MRC CTTC.
ISAC Reply 1A deleted from MRC CTTC.
ISAC Reply 1B deleted from MRC CTTC.
ISAC Reply 1C deleted from MRC CTTC.
ISAC Reply 1D deleted from MRC CTTC.
ISAC Reply 1E deleted from MRC CTTC.
ISAC Reply 1F deleted from MRC CTTC.
ISAC Reply 1G deleted from MRC CTTC.
ISAC Reply 1H deleted from MRC CTTC.
ISAC Reply 1J deleted from MRC CTTC.
ISAC Reply 1K deleted from MRC CTTC.
ISAC Reply 3AEE added to MRC AAJF.
ISAC Reply 3AET added to MRC AAJF.
ISAC Reply 3AEU added to MRC AAJF.
ISAC Reply 3AEV added to MRC AAJF.
ISAC Reply 3EER added to MRC AAJF.
ISAC Reply 3HOU added to MRC AAJF.
ISAC Reply 1A deleted from MRC AAJF.
ISAC Reply 1B deleted from MRC AAJF.
ISAC Reply 1C deleted from MRC AAJF.
ISAC Reply 1D deleted from MRC AAJF.
ISAC Reply 1E deleted from MRC AAJF.
ISAC Reply 1F deleted from MRC AAJF.
ISAC Reply 1G deleted from MRC AAJF.
ISAC Reply 1H deleted from MRC AAJF.
ISAC Reply 1J deleted from MRC AAJF.
ISAC Reply 1K deleted from MRC AAJF.
ISAC Reply 3AEE added to MRC CWTK.
ISAC Reply 3AET added to MRC CWTK.
ISAC Reply 3HOU added to MRC CWTK.
ISAC Reply 1A deleted from MRC CWTK.
ISAC Reply 1B deleted from MRC CWTK.
ISAC Reply 1C deleted from MRC CWTK.
ISAC Reply 1D deleted from MRC CWTK.
ISAC Reply 1E deleted from MRC CWTK.
ISAC Reply 1F deleted from MRC CWTK.
ISAC Reply 1G deleted from MRC CWTK.
ISAC Reply 1H deleted from MRC CWTK.
ISAC Reply 1J deleted from MRC CWTK.
ISAC Reply 1K deleted from MRC CWTK.
ISAC Reply 3AEE added to MRC CWTR.
ISAC Reply 3AET added to MRC CWTR.
ISAC Reply 3AEU added to MRC CWTR.
ISAC Reply 3AEV added to MRC CWTR.
ISAC Reply 3HOU added to MRC CWTR.
ISAC Reply 1A deleted from MRC CWTR.
ISAC Reply 1B deleted from MRC CWTR.
ISAC Reply 1C deleted from MRC CWTR.
ISAC Reply 1D deleted from MRC CWTR.
ISAC Reply 1E deleted from MRC CWTR.
ISAC Reply 1F deleted from MRC CWTR.
ISAC Reply 1G deleted from MRC CWTR.
ISAC Reply 1H deleted from MRC CWTR.
ISAC Reply 1J deleted from MRC CWTR.
ISAC Reply 1K deleted from MRC CWTR.
ISAC Reply 3AEE added to MRC CWTX.
ISAC Reply 3AET added to MRC CWTX.
ISAC Reply 3AEU added to MRC CWTX.
ISAC Reply 3AEV added to MRC CWTX.
ISAC Reply 3EER added to MRC CWTX.
ISAC Reply 3HOU added to MRC CWTX.
ISAC Reply 1A deleted from MRC CWTX.
ISAC Reply 1B deleted from MRC CWTX.
ISAC Reply 1C deleted from MRC CWTX.
ISAC Reply 1D deleted from MRC CWTX.
ISAC Reply 1E deleted from MRC CWTX.
ISAC Reply 1F deleted from MRC CWTX.
ISAC Reply 1G deleted from MRC CWTX.
ISAC Reply 1H deleted from MRC CWTX.
ISAC Reply 1J deleted from MRC CWTX.
ISAC Reply 1K deleted from MRC CWTX.
ISAC Reply 3AEE added to MRC CWWC.
ISAC Reply 3AEE added to MRC CWWC.
ISAC Reply 3AET added to MRC CWWC.
ISAC Reply 3AET added to MRC CWWC.
ISAC Reply 3HOU added to MRC CWWC.
ISAC Reply 3HOU added to MRC CWWC.
ISAC Reply 1A deleted from MRC CWWC.
ISAC Reply 1B deleted from MRC CWWC.
ISAC Reply 1C deleted from MRC CWWC.
ISAC Reply 1D deleted from MRC CWWC.
ISAC Reply 1E deleted from MRC CWWC.
ISAC Reply 1F deleted from MRC CWWC.
ISAC Reply 1G deleted from MRC CWWC.
ISAC Reply 1H deleted from MRC CWWC.
ISAC Reply 1J deleted from MRC CWWC.
ISAC Reply 1K deleted from MRC CWWC.
ISAC Reply 3AEE added to MRC CWWH.
ISAC Reply 3AET added to MRC CWWH.
ISAC Reply 3AEU added to MRC CWWH.
ISAC Reply 3AEV added to MRC CWWH.
ISAC Reply 3HOU added to MRC CWWH.
ISAC Reply 1A deleted from MRC CWWH.
ISAC Reply 1B deleted from MRC CWWH.
ISAC Reply 1C deleted from MRC CWWH.
ISAC Reply 1D deleted from MRC CWWH.
ISAC Reply 1E deleted from MRC CWWH.
ISAC Reply 1F deleted from MRC CWWH.
ISAC Reply 1G deleted from MRC CWWH.
ISAC Reply 1H deleted from MRC CWWH.
ISAC Reply 1J deleted from MRC CWWH.
ISAC Reply 1K deleted from MRC CWWH.
ISAC Reply 3AEE added to MRC CWWN.
ISAC Reply 3AET added to MRC CWWN.
ISAC Reply 3AEU added to MRC CWWN.
ISAC Reply 3AEV added to MRC CWWN.
ISAC Reply 3HOU added to MRC CWWN.
ISAC Reply 1A deleted from MRC CWWN.
ISAC Reply 1B deleted from MRC CWWN.
ISAC Reply 1C deleted from MRC CWWN.
ISAC Reply 1D deleted from MRC CWWN.
ISAC Reply 1E deleted from MRC CWWN.
ISAC Reply 1F deleted from MRC CWWN.
ISAC Reply 1G deleted from MRC CWWN.
ISAC Reply 1H deleted from MRC CWWN.
ISAC Reply 1J deleted from MRC CWWN.
ISAC Reply 1K deleted from MRC CWWN.
ISAC Reply 3AEE added to MRC CWWS.
ISAC Reply 3AEE added to MRC CWWS.
ISAC Reply 3AET added to MRC CWWS.
ISAC Reply 3AET added to MRC CWWS.
ISAC Reply 3AEU added to MRC CWWS.
ISAC Reply 3AEU added to MRC CWWS.
ISAC Reply 3AEV added to MRC CWWS.
ISAC Reply 3AEV added to MRC CWWS.
ISAC Reply 3HOU added to MRC CWWS.
ISAC Reply 3HOU added to MRC CWWS.
ISAC Reply 1A deleted from MRC CWWS.
ISAC Reply 1B deleted from MRC CWWS.
ISAC Reply 1C deleted from MRC CWWS.
ISAC Reply 1D deleted from MRC CWWS.
ISAC Reply 1E deleted from MRC CWWS.
ISAC Reply 1F deleted from MRC CWWS.
ISAC Reply 1G deleted from MRC CWWS.
ISAC Reply 1H deleted from MRC CWWS.
ISAC Reply 1J deleted from MRC CWWS.
ISAC Reply 1K deleted from MRC CWWS.
ISAC Reply 3AEE added to MRC CWXB.
ISAC Reply 3AET added to MRC CWXB.
ISAC Reply 3AEU added to MRC CWXB.
ISAC Reply 3AEV added to MRC CWXB.
ISAC Reply 3HOU added to MRC CWXB.
ISAC Reply 1A deleted from MRC CWXB.
ISAC Reply 1B deleted from MRC CWXB.
ISAC Reply 1C deleted from MRC CWXB.
ISAC Reply 1D deleted from MRC CWXB.
ISAC Reply 1E deleted from MRC CWXB.
ISAC Reply 1F deleted from MRC CWXB.
ISAC Reply 1G deleted from MRC CWXB.
ISAC Reply 1H deleted from MRC CWXB.
ISAC Reply 1J deleted from MRC CWXB.
ISAC Reply 1K deleted from MRC CWXB.
ISAC Reply 3AEE added to MRC CWXG.
ISAC Reply 3AEE added to MRC CWXG.
ISAC Reply 3AET added to MRC CWXG.
ISAC Reply 3AET added to MRC CWXG.
ISAC Reply 3AEU added to MRC CWXG.
ISAC Reply 3AEU added to MRC CWXG.
ISAC Reply 3HOU added to MRC CWXG.
ISAC Reply 3HOU added to MRC CWXG.
ISAC Reply 1A deleted from MRC CWXG.
ISAC Reply 1B deleted from MRC CWXG.
ISAC Reply 1C deleted from MRC CWXG.
ISAC Reply 1D deleted from MRC CWXG.
ISAC Reply 1E deleted from MRC CWXG.
ISAC Reply 1F deleted from MRC CWXG.
ISAC Reply 1G deleted from MRC CWXG.
ISAC Reply 1H deleted from MRC CWXG.
ISAC Reply 1J deleted from MRC CWXG.
ISAC Reply 1K deleted from MRC CWXG.
ISAC Reply 3AEE added to MRC CWXL.
ISAC Reply 3AET added to MRC CWXL.
ISAC Reply 3AEU added to MRC CWXL.
ISAC Reply 3HOU added to MRC CWXL.
ISAC Reply 1A deleted from MRC CWXL.
ISAC Reply 1B deleted from MRC CWXL.
ISAC Reply 1C deleted from MRC CWXL.
ISAC Reply 1D deleted from MRC CWXL.
ISAC Reply 1E deleted from MRC CWXL.
ISAC Reply 1F deleted from MRC CWXL.
ISAC Reply 1G deleted from MRC CWXL.
ISAC Reply 1H deleted from MRC CWXL.
ISAC Reply 1J deleted from MRC CWXL.
ISAC Reply 1K deleted from MRC CWXL.
ISAC Reply 3AEE added to MRC CWXP.
ISAC Reply 3AET added to MRC CWXP.
ISAC Reply 3HOU added to MRC CWXP.
ISAC Reply 1A deleted from MRC CWXP.
ISAC Reply 1B deleted from MRC CWXP.
ISAC Reply 1C deleted from MRC CWXP.
ISAC Reply 1D deleted from MRC CWXP.
ISAC Reply 1E deleted from MRC CWXP.
ISAC Reply 1F deleted from MRC CWXP.
ISAC Reply 1G deleted from MRC CWXP.
ISAC Reply 1H deleted from MRC CWXP.
ISAC Reply 1J deleted from MRC CWXP.
ISAC Reply 1K deleted from MRC CWXP.
ISAC Reply 3AEE added to MRC CWXT.
ISAC Reply 3AET added to MRC CWXT.
ISAC Reply 3HOU added to MRC CWXT.
ISAC Reply 1A deleted from MRC CWXT.
ISAC Reply 1B deleted from MRC CWXT.
ISAC Reply 1C deleted from MRC CWXT.
ISAC Reply 1D deleted from MRC CWXT.
ISAC Reply 1E deleted from MRC CWXT.
ISAC Reply 1F deleted from MRC CWXT.
ISAC Reply 1G deleted from MRC CWXT.
ISAC Reply 1H deleted from MRC CWXT.
ISAC Reply 1J deleted from MRC CWXT.
ISAC Reply 1K deleted from MRC CWXT.
ISAC Reply 3AEE added to MRC CWXY.
ISAC Reply 3AEU added to MRC CWXY.
ISAC Reply 3HOU added to MRC CWXY.
ISAC Reply 1A deleted from MRC CWXY.
ISAC Reply 1B deleted from MRC CWXY.
ISAC Reply 1C deleted from MRC CWXY.
ISAC Reply 1D deleted from MRC CWXY.
ISAC Reply 1E deleted from MRC CWXY.
ISAC Reply 1F deleted from MRC CWXY.
ISAC Reply 1G deleted from MRC CWXY.
ISAC Reply 1H deleted from MRC CWXY.
ISAC Reply 1J deleted from MRC CWXY.
ISAC Reply 1K deleted from MRC CWXY.
ISAC Reply 3AEE added to MRC CWYD.
ISAC Reply 3AEU added to MRC CWYD.
ISAC Reply 3HOU added to MRC CWYD.
ISAC Reply 1A deleted from MRC CWYD.
ISAC Reply 1B deleted from MRC CWYD.
ISAC Reply 1C deleted from MRC CWYD.
ISAC Reply 1D deleted from MRC CWYD.
ISAC Reply 1E deleted from MRC CWYD.
ISAC Reply 1F deleted from MRC CWYD.
ISAC Reply 1G deleted from MRC CWYD.
ISAC Reply 1H deleted from MRC CWYD.
ISAC Reply 1J deleted from MRC CWYD.
ISAC Reply 1K deleted from MRC CWYD.
ISAC Reply 3AEE added to MRC CWYL.
ISAC Reply 3AEU added to MRC CWYL.
ISAC Reply 3HOU added to MRC CWYL.
ISAC Reply 1A deleted from MRC CWYL.
ISAC Reply 1B deleted from MRC CWYL.
ISAC Reply 1C deleted from MRC CWYL.
ISAC Reply 1D deleted from MRC CWYL.
ISAC Reply 1E deleted from MRC CWYL.
ISAC Reply 1F deleted from MRC CWYL.
ISAC Reply 1G deleted from MRC CWYL.
ISAC Reply 1H deleted from MRC CWYL.
ISAC Reply 1J deleted from MRC CWYL.
ISAC Reply 1K deleted from MRC CWYL.
ISAC Reply 3AEE added to MRC CTQY.
ISAC Reply 3EED added to MRC CTQY.
ISAC Reply 3EEF added to MRC CTQY.
ISAC Reply 3EEG added to MRC CTQY.
ISAC Reply 3EEH added to MRC CTQY.
ISAC Reply 3EEJ added to MRC CTQY.
ISAC Reply 3EEK added to MRC CTQY.
ISAC Reply 3EEO added to MRC CTQY.
ISAC Reply 3EEP added to MRC CTQY.
ISAC Reply 3HOU added to MRC CTQY.
ISAC Reply 1A deleted from MRC CTQY.
ISAC Reply 1B deleted from MRC CTQY.
ISAC Reply 1C deleted from MRC CTQY.
ISAC Reply 1D deleted from MRC CTQY.
ISAC Reply 1E deleted from MRC CTQY.
ISAC Reply 1F deleted from MRC CTQY.
ISAC Reply 1G deleted from MRC CTQY.
ISAC Reply 1H deleted from MRC CTQY.
ISAC Reply 1J deleted from MRC CTQY.
ISAC Reply 1K deleted from MRC CTQY.
ISAC Reply 1L deleted from MRC CTQY.
ISAC Reply 1M deleted from MRC CTQY.
ISAC Reply 1N deleted from MRC CTQY.
ISAC Reply 1P deleted from MRC CTQY.
ISAC Reply 3AEE added to MRC CWZK.
ISAC Reply 3EED added to MRC CWZK.
ISAC Reply 3EEF added to MRC CWZK.
ISAC Reply 3EEG added to MRC CWZK.
ISAC Reply 3EEJ added to MRC CWZK.
ISAC Reply 3EEO added to MRC CWZK.
ISAC Reply 3HOU added to MRC CWZK.
ISAC Reply 1A deleted from MRC CWZK.
ISAC Reply 1B deleted from MRC CWZK.
ISAC Reply 1C deleted from MRC CWZK.
ISAC Reply 1D deleted from MRC CWZK.
ISAC Reply 1E deleted from MRC CWZK.
ISAC Reply 1F deleted from MRC CWZK.
ISAC Reply 1G deleted from MRC CWZK.
ISAC Reply 1H deleted from MRC CWZK.
ISAC Reply 1J deleted from MRC CWZK.
ISAC Reply 1K deleted from MRC CWZK.
ISAC Reply 1L deleted from MRC CWZK.
ISAC Reply 1M deleted from MRC CWZK.
ISAC Reply 1N deleted from MRC CWZK.
ISAC Reply 1P deleted from MRC CWZK.
ISAC Reply 3AEE added to MRC CMLK.
ISAC Reply 3EED added to MRC CMLK.
ISAC Reply 3EEG added to MRC CMLK.
ISAC Reply 3EEH added to MRC CMLK.
ISAC Reply 3EEJ added to MRC CMLK.
ISAC Reply 3EEK added to MRC CMLK.
ISAC Reply 3EEO added to MRC CMLK.
ISAC Reply 3HOU added to MRC CMLK.
ISAC Reply 1A deleted from MRC CMLK.
ISAC Reply 1B deleted from MRC CMLK.
ISAC Reply 1C deleted from MRC CMLK.
ISAC Reply 1D deleted from MRC CMLK.
ISAC Reply 1E deleted from MRC CMLK.
ISAC Reply 1F deleted from MRC CMLK.
ISAC Reply 1G deleted from MRC CMLK.
ISAC Reply 1H deleted from MRC CMLK.
ISAC Reply 1J deleted from MRC CMLK.
ISAC Reply 1K deleted from MRC CMLK.
ISAC Reply 1L deleted from MRC CMLK.
ISAC Reply 1M deleted from MRC CMLK.
ISAC Reply 1N deleted from MRC CMLK.
ISAC Reply 1P deleted from MRC CMLK.
ISAC Reply 3AEE added to MRC CQLT.
ISAC Reply 3AEE added to MRC CQLT.
ISAC Reply 3EED added to MRC CQLT.
ISAC Reply 3EED added to MRC CQLT.
ISAC Reply 3EEG added to MRC CQLT.
ISAC Reply 3EEG added to MRC CQLT.
ISAC Reply 3EEH added to MRC CQLT.
ISAC Reply 3EEH added to MRC CQLT.
ISAC Reply 3EEJ added to MRC CQLT.
ISAC Reply 3EEJ added to MRC CQLT.
ISAC Reply 3EEK added to MRC CQLT.
ISAC Reply 3EEK added to MRC CQLT.
ISAC Reply 3EEO added to MRC CQLT.
ISAC Reply 3EEO added to MRC CQLT.
ISAC Reply 3HOU added to MRC CQLT.
ISAC Reply 3HOU added to MRC CQLT.
ISAC Reply 1A deleted from MRC CQLT.
ISAC Reply 1B deleted from MRC CQLT.
ISAC Reply 1C deleted from MRC CQLT.
ISAC Reply 1D deleted from MRC CQLT.
ISAC Reply 1E deleted from MRC CQLT.
ISAC Reply 1F deleted from MRC CQLT.
ISAC Reply 1G deleted from MRC CQLT.
ISAC Reply 1H deleted from MRC CQLT.
ISAC Reply 1J deleted from MRC CQLT.
ISAC Reply 1K deleted from MRC CQLT.
ISAC Reply 1L deleted from MRC CQLT.
ISAC Reply 1M deleted from MRC CQLT.
ISAC Reply 1N deleted from MRC CQLT.
ISAC Reply 1P deleted from MRC CQLT.
ISAC Reply 3AEE added to MRC CMLM.
ISAC Reply 3EED added to MRC CMLM.
ISAC Reply 3EEG added to MRC CMLM.
ISAC Reply 3EEO added to MRC CMLM.
ISAC Reply 3HOU added to MRC CMLM.
ISAC Reply 1A deleted from MRC CMLM.
ISAC Reply 1B deleted from MRC CMLM.
ISAC Reply 1C deleted from MRC CMLM.
ISAC Reply 1D deleted from MRC CMLM.
ISAC Reply 1E deleted from MRC CMLM.
ISAC Reply 1F deleted from MRC CMLM.
ISAC Reply 1G deleted from MRC CMLM.
ISAC Reply 1H deleted from MRC CMLM.
ISAC Reply 1J deleted from MRC CMLM.
ISAC Reply 1K deleted from MRC CMLM.
ISAC Reply 1L deleted from MRC CMLM.
ISAC Reply 1M deleted from MRC CMLM.
ISAC Reply 1N deleted from MRC CMLM.
ISAC Reply 1P deleted from MRC CMLM.
ISAC Reply 3AEE added to MRC CRNZ.
ISAC Reply 3EEG added to MRC CRNZ.
ISAC Reply 3HOU added to MRC CRNZ.
ISAC Reply 1A deleted from MRC CRNZ.
ISAC Reply 1B deleted from MRC CRNZ.
ISAC Reply 1C deleted from MRC CRNZ.
ISAC Reply 1D deleted from MRC CRNZ.
ISAC Reply 1E deleted from MRC CRNZ.
ISAC Reply 1F deleted from MRC CRNZ.
ISAC Reply 1G deleted from MRC CRNZ.
ISAC Reply 1H deleted from MRC CRNZ.
ISAC Reply 1J deleted from MRC CRNZ.
ISAC Reply 1K deleted from MRC CRNZ.
ISAC Reply 1L deleted from MRC CRNZ.
ISAC Reply 1M deleted from MRC CRNZ.
ISAC Reply 1N deleted from MRC CRNZ.
ISAC Reply 1P deleted from MRC CRNZ.
ISAC Reply 3AEE added to MRC CWKJ.
ISAC Reply 3EEG added to MRC CWKJ.
ISAC Reply 3HOU added to MRC CWKJ.
ISAC Reply 1A deleted from MRC CWKJ.
ISAC Reply 1B deleted from MRC CWKJ.
ISAC Reply 1C deleted from MRC CWKJ.
ISAC Reply 1D deleted from MRC CWKJ.
ISAC Reply 1E deleted from MRC CWKJ.
ISAC Reply 1F deleted from MRC CWKJ.
ISAC Reply 1G deleted from MRC CWKJ.
ISAC Reply 1H deleted from MRC CWKJ.
ISAC Reply 1J deleted from MRC CWKJ.
ISAC Reply 1K deleted from MRC CWKJ.
ISAC Reply 1L deleted from MRC CWKJ.
ISAC Reply 1M deleted from MRC CWKJ.
ISAC Reply 1N deleted from MRC CWKJ.
ISAC Reply 1P deleted from MRC CWKJ.
ISAC Reply 3AEE added to MRC CWZN.
ISAC Reply 3EED added to MRC CWZN.
ISAC Reply 3EEG added to MRC CWZN.
ISAC Reply 3EEO added to MRC CWZN.
ISAC Reply 3HOU added to MRC CWZN.
ISAC Reply 1A deleted from MRC CWZN.
ISAC Reply 1B deleted from MRC CWZN.
ISAC Reply 1C deleted from MRC CWZN.
ISAC Reply 1D deleted from MRC CWZN.
ISAC Reply 1E deleted from MRC CWZN.
ISAC Reply 1F deleted from MRC CWZN.
ISAC Reply 1G deleted from MRC CWZN.
ISAC Reply 1H deleted from MRC CWZN.
ISAC Reply 1J deleted from MRC CWZN.
ISAC Reply 1K deleted from MRC CWZN.
ISAC Reply 1L deleted from MRC CWZN.
ISAC Reply 1M deleted from MRC CWZN.
ISAC Reply 1N deleted from MRC CWZN.
ISAC Reply 1P deleted from MRC CWZN.
MRC CWSK has been deleted
MRC AAJE has been deleted
MRC CWYR has been deleted
MRC CWYW has been deleted
MRC CWZC has been deleted
MRC CXRX has been deleted
MRC CXRY has been deleted
MRC CXRZ has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED05468*)
AJLAATEETH QUANTITY
THE NUMBER OF TEETH INCLUDED ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AJLAA10*)
CWNMDTOOTH DIRECTION
THE DIRECTION THE TEETH CURVE WHEN VIEWED FROM THE EDGE OF THE ITEM.
Enter the applicable reply code from the table below
(CWNMDABT*;CWNMDABS$$DABT*)
| Table 1 |
| Reply Code (AA38) | Reply |
| ABS | LEFT |
| ABT | RIGHT |
CWPPJPRESSURE ANGLE
THE MEASUREMENT OF THE PRESSURE ANGLE ON THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWPPJD2.0*;CWPPJD2.0$$JD2.1*)
| Table 1 |
| Reply Code (AP38) | Reply |
| D | DEGREES |
| R | RADIANS |
CWPZJHELIX ANGLE
THE MEASUREMENT OF THE HELIX ANGLE ON THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWPZJD2.0*)
| Table 1 |
| Reply Code (AP38) | Reply |
| D | DEGREES |
| R | RADIANS |
AAQLLBODY STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE BODY.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAQLL3A)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AD10077 | 1 | PLAIN, SOLID |
| AD10078 | 2 | PLAIN, WITH LIGHTENING HOLES |
| DR03026 | 3A | WEBBED, SOLID |
| DR03027 | 3B | WEBBED, OFFSET, SOLID |
| DR03028 | 4A | WEBBED, WITH LIGHTENING HOLES |
| DR03029 | 4B | WEBBED, OFFSET, WITH LIGHTENING HOLES |
| DR03030 | 5A | SPOKED |
| DR03031 | 5B | SPOKED, OFFSET |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3EEBDST0182*;MATT3EEBDST0182$DCU0090*;MATT3EEBDST0182$$DCU0090*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACK | BUSHING |
| 3AEE | OVERALL |
| 3AVU | SLEEVE |
| 3CYK | HUB |
| 3EDW | BORE SURFACE |
| 3EEB | SPLINE |
| 3EEC | TEETH |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL1100 | ALUMINUM ALLOY 1100 |
| AL1230 | ALUMINUM ALLOY 1230 |
| AL2011 | ALUMINUM ALLOY 2011 |
| AL2014 | ALUMINUM ALLOY 2014 |
| AL2017 | ALUMINUM ALLOY 2017 |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL2025 | ALUMINUM ALLOY 2025 |
| AL2117 | ALUMINUM ALLOY 2117 |
| AL0025 | ALUMINUM ALLOY 295.0 |
| AL3003 | ALUMINUM ALLOY 3003 |
| AL0308 | ALUMINUM ALLOY 308.0 |
| AL0045 | ALUMINUM ALLOY 355.0 |
| AL0046 | ALUMINUM ALLOY 356.0 |
| AL0029 | ALUMINUM ALLOY 360.0 |
| AL0031 | ALUMINUM ALLOY 380.0 |
| AL0054 | ALUMINUM ALLOY 383.0 |
| AL0032 | ALUMINUM ALLOY 384.0 |
| AL0027 | ALUMINUM ALLOY 413.0 |
| AL0044 | ALUMINUM ALLOY 443.0 |
| AL5052 | ALUMINUM ALLOY 5052 |
| AL5056 | ALUMINUM ALLOY 5056 |
| AL5083 | ALUMINUM ALLOY 5083 |
| AL5086 | ALUMINUM ALLOY 5086 |
| AL0050 | ALUMINUM ALLOY 518.0 |
| AL5456 | ALUMINUM ALLOY 5456 |
| AL6003 | ALUMINUM ALLOY 6003 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL6062 | ALUMINUM ALLOY 6062 |
| AL6066 | ALUMINUM ALLOY 6066 |
| AL6262 | ALUMINUM ALLOY 6262 |
| AL7075 | ALUMINUM ALLOY 7075 |
| AL0052 | ALUMINUM ALLOY A360.0 |
| AL0028 | ALUMINUM ALLOY A380.0 |
| AL0030 | ALUMINUM ALLOY A413.0 |
| AL0040 | ALUMINUM ALLOY B295.0 |
| AL0060 | ALUMINUM ALLOY C355.0 |
| AL0008 | ALUMINUM ALLOY C443.0 |
| ASA000 | ASBESTOS |
| BND000 | BRONZE |
| CSA000 | CELLULOSE |
| CRB000 | CHROMIUM ALLOY |
| CTB000 | COBALT ALLOY |
| CT0004 | COBALT COMP 6 |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0069 | COPPER ALLOY 172 |
| CU0233 | COPPER ALLOY 173 |
| CU0074 | COPPER ALLOY 230 |
| CU0076 | COPPER ALLOY 240 |
| CU0079 | COPPER ALLOY 260 |
| CU0304 | COPPER ALLOY 262 |
| CU0080 | COPPER ALLOY 268 |
| CU0081 | COPPER ALLOY 270 |
| CU0272 | COPPER ALLOY 272 |
| CU0274 | COPPER ALLOY 274 |
| CU0302 | COPPER ALLOY 280 |
| CU0314 | COPPER ALLOY 314 |
| CU0316 | COPPER ALLOY 316 |
| CU0320 | COPPER ALLOY 320 |
| CU0330 | COPPER ALLOY 330 |
| CU0305 | COPPER ALLOY 331 |
| CU0332 | COPPER ALLOY 332 |
| CU0335 | COPPER ALLOY 335 |
| CU0340 | COPPER ALLOY 340 |
| CU0088 | COPPER ALLOY 342 |
| CU0306 | COPPER ALLOY 344 |
| CU0307 | COPPER ALLOY 345 |
| CU0308 | COPPER ALLOY 347 |
| CU0309 | COPPER ALLOY 348 |
| CU0310 | COPPER ALLOY 350 |
| CU0089 | COPPER ALLOY 353 |
| CU0090 | COPPER ALLOY 356 |
| CU0091 | COPPER ALLOY 360 |
| CU0370 | COPPER ALLOY 370 |
| CU0092 | COPPER ALLOY 377 |
| CU0098 | COPPER ALLOY 462 |
| CU0099 | COPPER ALLOY 464 |
| CU0465 | COPPER ALLOY 465 |
| CU0466 | COPPER ALLOY 466 |
| CU0467 | COPPER ALLOY 467 |
| CU0100 | COPPER ALLOY 482 |
| CU0101 | COPPER ALLOY 485 |
| CU0509 | COPPER ALLOY 509 |
| CU0103 | COPPER ALLOY 510 |
| CU0105 | COPPER ALLOY 521 |
| CU0106 | COPPER ALLOY 524 |
| CU0108 | COPPER ALLOY 534 |
| CU0109 | COPPER ALLOY 544 |
| CU0111 | COPPER ALLOY 606 |
| CU0112 | COPPER ALLOY 610 |
| CU0114 | COPPER ALLOY 613 |
| CU0115 | COPPER ALLOY 614 |
| CU0119 | COPPER ALLOY 623 |
| CU0122 | COPPER ALLOY 630 |
| CU0632 | COPPER ALLOY 632 |
| CU0127 | COPPER ALLOY 642 |
| CU0128 | COPPER ALLOY 647 |
| CU0129 | COPPER ALLOY 651 |
| CU0131 | COPPER ALLOY 655 |
| CU0134 | COPPER ALLOY 661 |
| CU0670 | COPPER ALLOY 670 |
| CU0675 | COPPER ALLOY 675 |
| CU0146 | COPPER ALLOY 735 |
| CU0148 | COPPER ALLOY 745 |
| CU0150 | COPPER ALLOY 752 |
| CU0151 | COPPER ALLOY 762 |
| CU0152 | COPPER ALLOY 764 |
| CU0153 | COPPER ALLOY 766 |
| CU0157 | COPPER ALLOY 770 |
| CU0166 | COPPER ALLOY 820 |
| CU0167 | COPPER ALLOY 824 |
| CU0168 | COPPER ALLOY 825 |
| CU0169 | COPPER ALLOY 826 |
| CU0170 | COPPER ALLOY 827 |
| CU0171 | COPPER ALLOY 828 |
| CU0172 | COPPER ALLOY 836 |
| CU0173 | COPPER ALLOY 838 |
| CU0841 | COPPER ALLOY 841 |
| CU0174 | COPPER ALLOY 842 |
| CU0175 | COPPER ALLOY 844 |
| CU0176 | COPPER ALLOY 848 |
| CU0177 | COPPER ALLOY 852 |
| CU0178 | COPPER ALLOY 854 |
| CU0179 | COPPER ALLOY 855 |
| CU0180 | COPPER ALLOY 857 |
| CU0181 | COPPER ALLOY 861 |
| CU0182 | COPPER ALLOY 862 |
| CU0183 | COPPER ALLOY 863 |
| CU0184 | COPPER ALLOY 864 |
| CU0185 | COPPER ALLOY 865 |
| CU0186 | COPPER ALLOY 868 |
| CU0187 | COPPER ALLOY 872 |
| CU0188 | COPPER ALLOY 874 |
| CU0875 | COPPER ALLOY 875 |
| CU0195 | COPPER ALLOY 903 |
| CU0196 | COPPER ALLOY 905 |
| CU0197 | COPPER ALLOY 907 |
| CU0198 | COPPER ALLOY 910 |
| CU0199 | COPPER ALLOY 913 |
| CU0201 | COPPER ALLOY 916 |
| CU0202 | COPPER ALLOY 922 |
| CU0203 | COPPER ALLOY 923 |
| CU0204 | COPPER ALLOY 925 |
| CU0205 | COPPER ALLOY 927 |
| CU0929 | COPPER ALLOY 929 |
| CU0206 | COPPER ALLOY 932 |
| CU0207 | COPPER ALLOY 934 |
| CU0208 | COPPER ALLOY 935 |
| CU0209 | COPPER ALLOY 937 |
| CU0210 | COPPER ALLOY 938 |
| CU0211 | COPPER ALLOY 939 |
| CU0212 | COPPER ALLOY 940 |
| CU0213 | COPPER ALLOY 941 |
| CU0214 | COPPER ALLOY 943 |
| CU0215 | COPPER ALLOY 947 |
| CU0216 | COPPER ALLOY 948 |
| CU0217 | COPPER ALLOY 952 |
| CU0218 | COPPER ALLOY 953 |
| CU0219 | COPPER ALLOY 954 |
| CU0220 | COPPER ALLOY 955 |
| CU0221 | COPPER ALLOY 957 |
| CU0222 | COPPER ALLOY 958 |
| CU0223 | COPPER ALLOY 962 |
| CU0224 | COPPER ALLOY 964 |
| CU1164 | COPPER ALLOY FED C6 |
| CU1162 | COPPER ALLOY FED E3 |
| CU1163 | COPPER ALLOY FED E4 |
| CCA000 | COTTON |
| LBF000 | DISULFIDE MOLYBDENUM |
| FBT000 | FLAX |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| GFA000 | GRAPHITE |
| FEA000 | IRON |
| FEF000 | IRON ALLOY |
| FE0019 | IRON ALLOY 660 |
| FE0165 | IRON ALLOY 870 |
| FEB000 | IRON CAST |
| FE0087 | IRON CAST UNS F10004 |
| FE0118 | IRON CAST UNS F10007 |
| FE0119 | IRON CAST UNS F10008 |
| FE0123 | IRON CAST UNS F10012 |
| FE0044 | IRON CAST UNS F11401 |
| FE0062 | IRON CAST UNS F11501 |
| FE0045 | IRON CAST UNS F11701 |
| FE0046 | IRON CAST UNS F12101 |
| FE0052 | IRON CAST UNS F12401 |
| FE0047 | IRON CAST UNS F12801 |
| FE0048 | IRON CAST UNS F13101 |
| FE0049 | IRON CAST UNS F13501 |
| FE0050 | IRON CAST UNS F13801 |
| FE0051 | IRON CAST UNS F14101 |
| FE0183 | IRON CAST UNS F30000 |
| FE0066 | IRON CAST UNS F33800 |
| FE0041 | IRON CAST UNS F34100 |
| FE0067 | IRON CAST UNS F34800 |
| FE0068 | IRON CAST UNS F36200 |
| FEC000 | IRON MALLEABLE |
| FEE000 | IRON RUST RESISTING |
| MGA000 | MAGNESIUM |
| MG0001 | MAGNESIUM ALLOY AZ31B |
| MG0004 | MAGNESIUM ALLOY HK31A |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| NL0008 | NICKEL ALLOY 400 |
| NL0010 | NICKEL ALLOY 718 |
| NL0018 | NICKEL ALLOY K-500 |
| NL0017 | NICKEL ALLOY R-405 |
| PPA000 | PAPER |
| PCA000 | PLASTIC |
| PCB000 | PLASTIC ACETAL |
| PCD000 | PLASTIC ACRYLIC |
| PCBL00 | PLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) |
| PCJ000 | PLASTIC MELAMINE |
| PCM000 | PLASTIC PHENOL-FORMALDEHYDE |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCQ000 | PLASTIC POLYCAPROLACTAM |
| PCR000 | PLASTIC POLYCARBONATE |
| PCZ000 | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE |
| PCAM00 | PLASTIC POLYHEXAMETHYLENE AMIDE |
| PCAA00 | PLASTIC POLYHEXAMETHYLENE SEBACAMIDE |
| PCAE00 | PLASTIC POLYSULFONE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCAK00 | PLASTIC SILICONE |
| PCAW00 | PLASTIC TETRAFLUOROETHYLENE |
| RCE000 | RUBBER |
| STA000 | STEEL |
| ST0372 | STEEL COMP 1.0503 |
| ST0362 | STEEL COMP 1.0601 |
| ST0845 | STEEL COMP 1.1181 |
| ST0846 | STEEL COMP 1.1191 |
| ST1299 | STEEL COMP 1.6587 |
| ST0867 | STEEL COMP 1.7033 |
| ST0869 | STEEL COMP 1.7131 |
| ST0871 | STEEL COMP 1.7220 |
| ST0872 | STEEL COMP 1.7225 |
| ST1006 | STEEL COMP 1006 |
| ST1008 | STEEL COMP 1008 |
| ST1009 | STEEL COMP 1009 |
| ST1010 | STEEL COMP 1010 |
| ST1011 | STEEL COMP 1011 |
| ST1012 | STEEL COMP 1012 |
| ST1013 | STEEL COMP 1013 |
| ST1015 | STEEL COMP 1015 |
| ST1016 | STEEL COMP 1016 |
| ST1017 | STEEL COMP 1017 |
| ST1018 | STEEL COMP 1018 |
| ST1019 | STEEL COMP 1019 |
| ST1020 | STEEL COMP 1020 |
| ST1021 | STEEL COMP 1021 |
| ST1022 | STEEL COMP 1022 |
| ST1023 | STEEL COMP 1023 |
| ST0493 | STEEL COMP 1023W |
| ST1025 | STEEL COMP 1025 |
| ST1026 | STEEL COMP 1026 |
| ST1029 | STEEL COMP 1029 |
| ST1030 | STEEL COMP 1030 |
| ST1031 | STEEL COMP 1031 |
| ST1033 | STEEL COMP 1033 |
| ST1034 | STEEL COMP 1034 |
| ST1035 | STEEL COMP 1035 |
| ST1037 | STEEL COMP 1037 |
| ST1038 | STEEL COMP 1038 |
| ST0511 | STEEL COMP 1038H |
| ST1039 | STEEL COMP 1039 |
| ST1040 | STEEL COMP 1040 |
| ST1042 | STEEL COMP 1042 |
| ST1043 | STEEL COMP 1043 |
| ST1044 | STEEL COMP 1044 |
| ST1045 | STEEL COMP 1045 |
| ST0512 | STEEL COMP 1045H |
| ST1046 | STEEL COMP 1046 |
| ST1049 | STEEL COMP 1049 |
| ST1050 | STEEL COMP 1050 |
| ST1053 | STEEL COMP 1053 |
| ST1054 | STEEL COMP 1054 |
| ST1055 | STEEL COMP 1055 |
| ST0530 | STEEL COMP 105-85 |
| ST1059 | STEEL COMP 1059 |
| ST1060 | STEEL COMP 1060 |
| ST1064 | STEEL COMP 1064 |
| ST1065 | STEEL COMP 1065 |
| ST1069 | STEEL COMP 1069 |
| ST1070 | STEEL COMP 1070 |
| ST1074 | STEEL COMP 1074 |
| ST1075 | STEEL COMP 1075 |
| ST1078 | STEEL COMP 1078 |
| ST1080 | STEEL COMP 1080 |
| ST1084 | STEEL COMP 1084 |
| ST1085 | STEEL COMP 1085 |
| ST1086 | STEEL COMP 1086 |
| ST1090 | STEEL COMP 1090 |
| ST1095 | STEEL COMP 1095 |
| ST0538 | STEEL COMP 10L18 |
| ST1108 | STEEL COMP 1108 |
| ST1109 | STEEL COMP 1109 |
| ST1110 | STEEL COMP 1110 |
| ST1115 | STEEL COMP 1115 |
| ST1116 | STEEL COMP 1116 |
| ST1117 | STEEL COMP 1117 |
| ST1118 | STEEL COMP 1118 |
| ST1119 | STEEL COMP 1119 |
| ST1120 | STEEL COMP 1120 |
| ST1125 | STEEL COMP 1125 |
| ST1126 | STEEL COMP 1126 |
| ST1132 | STEEL COMP 1132 |
| ST1137 | STEEL COMP 1137 |
| ST1138 | STEEL COMP 1138 |
| ST1139 | STEEL COMP 1139 |
| ST1140 | STEEL COMP 1140 |
| ST1141 | STEEL COMP 1141 |
| ST1144 | STEEL COMP 1144 |
| ST1145 | STEEL COMP 1145 |
| ST1146 | STEEL COMP 1146 |
| ST1151 | STEEL COMP 1151 |
| ST0539 | STEEL COMP 11L17 |
| ST0520 | STEEL COMP 120-95 |
| ST1211 | STEEL COMP 1211 |
| ST1212 | STEEL COMP 1212 |
| ST1213 | STEEL COMP 1213 |
| ST1215 | STEEL COMP 1215 |
| ST0540 | STEEL COMP 12L11 |
| ST0541 | STEEL COMP 12L12 |
| ST0179 | STEEL COMP 12L13 |
| ST0063 | STEEL COMP 12L14 |
| ST1315 | STEEL COMP 1315 |
| ST1320 | STEEL COMP 1320 |
| ST1330 | STEEL COMP 1330 |
| ST0065 | STEEL COMP 1330H |
| ST1335 | STEEL COMP 1335 |
| ST0066 | STEEL COMP 1335H |
| ST1340 | STEEL COMP 1340 |
| ST0067 | STEEL COMP 1340H |
| ST1345 | STEEL COMP 1345 |
| ST0068 | STEEL COMP 1345H |
| ST0550 | STEEL COMP 135G |
| ST0547 | STEEL COMP 135M |
| ST0670 | STEEL COMP 14B35H |
| ST0531 | STEEL COMP 150-125 |
| ST0513 | STEEL COMP 1522H |
| ST1524 | STEEL COMP 1524 |
| ST0514 | STEEL COMP 1524H |
| ST0515 | STEEL COMP 1526H |
| ST1527 | STEEL COMP 1527 |
| ST1536 | STEEL COMP 1536 |
| ST1541 | STEEL COMP 1541 |
| ST0516 | STEEL COMP 1541H |
| ST1548 | STEEL COMP 1548 |
| ST1551 | STEEL COMP 1551 |
| ST1552 | STEEL COMP 1552 |
| ST1561 | STEEL COMP 1561 |
| ST0663 | STEEL COMP 15B21H |
| ST0503 | STEEL COMP 15B35H |
| ST0504 | STEEL COMP 15B37H |
| ST0664 | STEEL COMP 15B41H |
| ST0665 | STEEL COMP 15B48H |
| ST0666 | STEEL COMP 15B62H |
| ST0572 | STEEL COMP 175-145 |
| ST0201 | STEEL COMP 201 |
| ST0202 | STEEL COMP 202 |
| ST0159 | STEEL COMP 203EZ |
| ST2315 | STEEL COMP 2315 |
| ST2317 | STEEL COMP 2317 |
| ST2340 | STEEL COMP 2340 |
| ST2345 | STEEL COMP 2345 |
| ST2512 | STEEL COMP 2512 |
| ST0301 | STEEL COMP 301 |
| ST0302 | STEEL COMP 302 |
| ST0180 | STEEL COMP 302B |
| ST0303 | STEEL COMP 303 |
| ST0166 | STEEL COMP 303 PLUS X |
| ST0157 | STEEL COMP 303CU |
| ST0165 | STEEL COMP 303MA |
| ST0158 | STEEL COMP 303PB |
| ST0078 | STEEL COMP 303S |
| ST0079 | STEEL COMP 303SE |
| ST0304 | STEEL COMP 304 |
| ST0448 | STEEL COMP 304H |
| ST0080 | STEEL COMP 304L |
| ST0449 | STEEL COMP 304N |
| ST0305 | STEEL COMP 305 |
| ST0152 | STEEL COMP 308 |
| ST0309 | STEEL COMP 309 |
| ST0153 | STEEL COMP 309S |
| ST0492 | STEEL COMP 309S-CB |
| ST0310 | STEEL COMP 310 |
| ST0154 | STEEL COMP 310S |
| ST3115 | STEEL COMP 3115 |
| ST3120 | STEEL COMP 3120 |
| ST3130 | STEEL COMP 3130 |
| ST0460 | STEEL COMP 3130H |
| ST3135 | STEEL COMP 3135 |
| ST0155 | STEEL COMP 314 |
| ST3140 | STEEL COMP 3140 |
| ST0081 | STEEL COMP 3140H |
| ST3141 | STEEL COMP 3141 |
| ST3145 | STEEL COMP 3145 |
| ST0316 | STEEL COMP 316 |
| ST0354 | STEEL COMP 316F |
| ST0450 | STEEL COMP 316H |
| ST0082 | STEEL COMP 316L |
| ST0451 | STEEL COMP 316N |
| ST0317 | STEEL COMP 317 |
| ST0254 | STEEL COMP 317L |
| ST0321 | STEEL COMP 321 |
| ST0452 | STEEL COMP 321H |
| ST0322 | STEEL COMP 322 |
| ST0323 | STEEL COMP 323 |
| ST0324 | STEEL COMP 324 |
| ST0616 | STEEL COMP 325 |
| ST3250 | STEEL COMP 3250 |
| ST0490 | STEEL COMP 329 |
| ST0617 | STEEL COMP 330 |
| ST0618 | STEEL COMP 330A |
| ST0083 | STEEL COMP 3310H |
| ST0347 | STEEL COMP 347 |
| ST0453 | STEEL COMP 347H |
| ST0348 | STEEL COMP 348 |
| ST0640 | STEEL COMP 348H |
| ST0384 | STEEL COMP 384 |
| ST0385 | STEEL COMP 385 |
| ST4012 | STEEL COMP 4012 |
| ST4023 | STEEL COMP 4023 |
| ST4024 | STEEL COMP 4024 |
| ST4027 | STEEL COMP 4027 |
| ST0084 | STEEL COMP 4027H |
| ST4028 | STEEL COMP 4028 |
| ST0228 | STEEL COMP 4028H |
| ST0403 | STEEL COMP 403 |
| ST4032 | STEEL COMP 4032 |
| ST0253 | STEEL COMP 4032H |
| ST4037 | STEEL COMP 4037 |
| ST0085 | STEEL COMP 4037H |
| ST4042 | STEEL COMP 4042 |
| ST0086 | STEEL COMP 4042H |
| ST4047 | STEEL COMP 4047 |
| ST0087 | STEEL COMP 4047H |
| ST0405 | STEEL COMP 405 |
| ST4063 | STEEL COMP 4063 |
| ST0089 | STEEL COMP 4063H |
| ST4068 | STEEL COMP 4068 |
| ST0410 | STEEL COMP 410 |
| ST4118 | STEEL COMP 4118 |
| ST0229 | STEEL COMP 4118H |
| ST4119 | STEEL COMP 4119 |
| ST4120 | STEEL COMP 4120 |
| ST4130 | STEEL COMP 4130 |
| ST0090 | STEEL COMP 4130H |
| ST4135 | STEEL COMP 4135 |
| ST0091 | STEEL COMP 4135H |
| ST4137 | STEEL COMP 4137 |
| ST0092 | STEEL COMP 4137H |
| ST0414 | STEEL COMP 414 |
| ST4140 | STEEL COMP 4140 |
| ST0093 | STEEL COMP 4140H |
| ST4142 | STEEL COMP 4142 |
| ST0094 | STEEL COMP 4142H |
| ST4145 | STEEL COMP 4145 |
| ST0095 | STEEL COMP 4145H |
| ST4147 | STEEL COMP 4147 |
| ST0096 | STEEL COMP 4147H |
| ST4150 | STEEL COMP 4150 |
| ST0097 | STEEL COMP 4150H |
| ST0416 | STEEL COMP 416 |
| ST0255 | STEEL COMP 416 PLUS X |
| ST4161 | STEEL COMP 4161 |
| ST0230 | STEEL COMP 4161H |
| ST0098 | STEEL COMP 416F |
| ST0099 | STEEL COMP 416SE |
| ST1816 | STEEL COMP 41L40 |
| ST1837 | STEEL COMP 41L45 |
| ST0420 | STEEL COMP 420 |
| ST0100 | STEEL COMP 420F |
| ST0284 | STEEL COMP 420FSE |
| ST0429 | STEEL COMP 429 |
| ST0430 | STEEL COMP 430 |
| ST0101 | STEEL COMP 430F |
| ST0172 | STEEL COMP 430FSE |
| ST0431 | STEEL COMP 431 |
| ST4317 | STEEL COMP 4317 |
| ST4320 | STEEL COMP 4320 |
| ST0102 | STEEL COMP 4320H |
| ST4330 | STEEL COMP 4330 |
| ST4337 | STEEL COMP 4337 |
| ST0103 | STEEL COMP 4337H |
| ST4340 | STEEL COMP 4340 |
| ST0104 | STEEL COMP 4340H |
| ST0505 | STEEL COMP 43BV12 |
| ST0506 | STEEL COMP 43BV14 |
| ST0105 | STEEL COMP 440A |
| ST0106 | STEEL COMP 440B |
| ST0107 | STEEL COMP 440C |
| ST0108 | STEEL COMP 440F |
| ST0285 | STEEL COMP 440FSE |
| ST4419 | STEEL COMP 4419 |
| ST0232 | STEEL COMP 4419H |
| ST0442 | STEEL COMP 442 |
| ST0446 | STEEL COMP 446 |
| ST4615 | STEEL COMP 4615 |
| ST4617 | STEEL COMP 4617 |
| ST4620 | STEEL COMP 4620 |
| ST0109 | STEEL COMP 4620H |
| ST4621 | STEEL COMP 4621 |
| ST0110 | STEEL COMP 4621H |
| ST4626 | STEEL COMP 4626 |
| ST0233 | STEEL COMP 4626H |
| ST4640 | STEEL COMP 4640 |
| ST4718 | STEEL COMP 4718 |
| ST0234 | STEEL COMP 4718H |
| ST4720 | STEEL COMP 4720 |
| ST0235 | STEEL COMP 4720H |
| ST4812 | STEEL COMP 4812 |
| ST4815 | STEEL COMP 4815 |
| ST0111 | STEEL COMP 4815H |
| ST4817 | STEEL COMP 4817 |
| ST0236 | STEEL COMP 4817H |
| ST4820 | STEEL COMP 4820 |
| ST0112 | STEEL COMP 4820H |
| ST5015 | STEEL COMP 5015 |
| ST0193 | STEEL COMP 5046H |
| ST0482 | STEEL COMP 50B30 |
| ST0441 | STEEL COMP 50B40 |
| ST0507 | STEEL COMP 50B40H |
| ST0113 | STEEL COMP 50B44 |
| ST0237 | STEEL COMP 50B44H |
| ST0238 | STEEL COMP 50B46 |
| ST0239 | STEEL COMP 50B46H |
| ST0240 | STEEL COMP 50B50 |
| ST0241 | STEEL COMP 50B50H |
| ST0114 | STEEL COMP 50B60 |
| ST0164 | STEEL COMP 50B60H |
| ST5120 | STEEL COMP 5120 |
| ST0117 | STEEL COMP 5120H |
| ST5130 | STEEL COMP 5130 |
| ST0118 | STEEL COMP 5130H |
| ST5132 | STEEL COMP 5132 |
| ST0119 | STEEL COMP 5132H |
| ST5135 | STEEL COMP 5135 |
| ST0120 | STEEL COMP 5135H |
| ST5140 | STEEL COMP 5140 |
| ST0121 | STEEL COMP 5140H |
| ST5145 | STEEL COMP 5145 |
| ST0122 | STEEL COMP 5145H |
| ST5147 | STEEL COMP 5147 |
| ST0123 | STEEL COMP 5147H |
| ST5150 | STEEL COMP 5150 |
| ST0242 | STEEL COMP 5150H |
| ST5155 | STEEL COMP 5155 |
| ST0191 | STEEL COMP 5155H |
| ST5160 | STEEL COMP 5160 |
| ST0124 | STEEL COMP 5160H |
| ST0115 | STEEL COMP 51B60 |
| ST0116 | STEEL COMP 51B60H |
| ST0555 | STEEL COMP 60-30 |
| ST6118 | STEEL COMP 6118 |
| ST0185 | STEEL COMP 6118H |
| ST6120 | STEEL COMP 6120 |
| ST0169 | STEEL COMP 6120H |
| ST1588 | STEEL COMP 6130H |
| ST6140 | STEEL COMP 6140 |
| ST6145 | STEEL COMP 6145 |
| ST0615 | STEEL COMP 615 |
| ST6150 | STEEL COMP 6150 |
| ST0129 | STEEL COMP 6150H |
| ST0630 | STEEL COMP 630 |
| ST0631 | STEEL COMP 631 |
| ST0633 | STEEL COMP 633 |
| ST0634 | STEEL COMP 634 |
| ST0519 | STEEL COMP 65-35 |
| ST0556 | STEEL COMP 70-40 |
| ST0528 | STEEL COMP 80-40 |
| ST0134 | STEEL COMP 80-50 |
| ST8125 | STEEL COMP 8125 |
| ST0173 | STEEL COMP 81B45 |
| ST0192 | STEEL COMP 81B45H |
| ST8615 | STEEL COMP 8615 |
| ST0524 | STEEL COMP 8615H |
| ST8617 | STEEL COMP 8617 |
| ST0136 | STEEL COMP 8617H |
| ST8620 | STEEL COMP 8620 |
| ST0137 | STEEL COMP 8620H |
| ST8622 | STEEL COMP 8622 |
| ST0138 | STEEL COMP 8622H |
| ST8625 | STEEL COMP 8625 |
| ST0248 | STEEL COMP 8625H |
| ST8627 | STEEL COMP 8627 |
| ST0243 | STEEL COMP 8627H |
| ST8630 | STEEL COMP 8630 |
| ST0139 | STEEL COMP 8630H |
| ST8635 | STEEL COMP 8635 |
| ST0469 | STEEL COMP 8635H |
| ST8637 | STEEL COMP 8637 |
| ST0181 | STEEL COMP 8637H |
| ST8640 | STEEL COMP 8640 |
| ST0140 | STEEL COMP 8640H |
| ST8642 | STEEL COMP 8642 |
| ST0141 | STEEL COMP 8642H |
| ST8645 | STEEL COMP 8645 |
| ST0142 | STEEL COMP 8645H |
| ST8650 | STEEL COMP 8650 |
| ST0143 | STEEL COMP 8650H |
| ST8655 | STEEL COMP 8655 |
| ST0144 | STEEL COMP 8655H |
| ST8660 | STEEL COMP 8660 |
| ST0145 | STEEL COMP 8660H |
| ST0662 | STEEL COMP 86B30H |
| ST0509 | STEEL COMP 86B45H |
| ST1817 | STEEL COMP 86L20 |
| ST8720 | STEEL COMP 8720 |
| ST0146 | STEEL COMP 8720H |
| ST8730 | STEEL COMP 8730 |
| ST8735 | STEEL COMP 8735 |
| ST8740 | STEEL COMP 8740 |
| ST0147 | STEEL COMP 8740H |
| ST8742 | STEEL COMP 8742 |
| ST0148 | STEEL COMP 8742H |
| ST8745 | STEEL COMP 8745 |
| ST8750 | STEEL COMP 8750 |
| ST0471 | STEEL COMP 8750H |
| ST8822 | STEEL COMP 8822 |
| ST0244 | STEEL COMP 8822H |
| ST0184 | STEEL COMP 90-60 |
| ST9255 | STEEL COMP 9255 |
| ST9260 | STEEL COMP 9260 |
| ST0245 | STEEL COMP 9260H |
| ST9262 | STEEL COMP 9262 |
| ST0473 | STEEL COMP 9262H |
| ST0149 | STEEL COMP 9310H |
| ST9315 | STEEL COMP 9315 |
| ST9317 | STEEL COMP 9317 |
| ST9440 | STEEL COMP 9440 |
| ST9445 | STEEL COMP 9445 |
| ST0510 | STEEL COMP 94B15H |
| ST0246 | STEEL COMP 94B17 |
| ST0247 | STEEL COMP 94B17H |
| ST0688 | STEEL COMP 94B20 |
| ST0170 | STEEL COMP 94B30 |
| ST0182 | STEEL COMP 94B30H |
| ST0249 | STEEL COMP 94B40H |
| ST9840 | STEEL COMP 9840 |
| ST0150 | STEEL COMP 9840H |
| ST9850 | STEEL COMP 9850 |
| ST0151 | STEEL COMP 9850H |
| ST0397 | STEEL COMP A10 |
| ST0198 | STEEL COMP A2 |
| ST0391 | STEEL COMP A3 |
| ST0392 | STEEL COMP A4 |
| ST0393 | STEEL COMP A5 |
| ST0199 | STEEL COMP A6 |
| ST0394 | STEEL COMP A7 |
| ST0395 | STEEL COMP A8 |
| ST0396 | STEEL COMP A9 |
| ST0444 | STEEL COMP B1006 |
| ST0445 | STEEL COMP B1010 |
| ST0500 | STEEL COMP CV-45 |
| ST0398 | STEEL COMP D1 |
| ST0399 | STEEL COMP D2 |
| ST0400 | STEEL COMP D3 |
| ST0023 | STEEL COMP D4 |
| ST0401 | STEEL COMP D5 |
| ST0402 | STEEL COMP D7 |
| ST0026 | STEEL COMP E3310 |
| ST1093 | STEEL COMP E3316 |
| ST0028 | STEEL COMP E4340 |
| ST0029 | STEEL COMP E4340H |
| ST0213 | STEEL COMP E51100 |
| ST0030 | STEEL COMP E52100 |
| ST0031 | STEEL COMP E9310 |
| ST0548 | STEEL COMP EZ |
| ST0037 | STEEL COMP F1 |
| ST0038 | STEEL COMP F2 |
| ST0404 | STEEL COMP F3 |
| ST0406 | STEEL COMP H10 |
| ST0043 | STEEL COMP H11 |
| ST0407 | STEEL COMP H12 |
| ST0218 | STEEL COMP H13 |
| ST0408 | STEEL COMP H14 |
| ST0409 | STEEL COMP H16 |
| ST0411 | STEEL COMP H19 |
| ST0412 | STEEL COMP H20 |
| ST0413 | STEEL COMP H21 |
| ST0415 | STEEL COMP H22 |
| ST0417 | STEEL COMP H23 |
| ST0418 | STEEL COMP H24 |
| ST0419 | STEEL COMP H25 |
| ST0421 | STEEL COMP H26 |
| ST0422 | STEEL COMP H41 |
| ST0423 | STEEL COMP H42 |
| ST0424 | STEEL COMP H43 |
| ST0425 | STEEL COMP L1 |
| ST0426 | STEEL COMP L2 |
| ST0427 | STEEL COMP L3 |
| ST0428 | STEEL COMP L6 |
| ST0432 | STEEL COMP L7 |
| ST0219 | STEEL COMP M1008 |
| ST0171 | STEEL COMP M1010 |
| ST0220 | STEEL COMP M1012 |
| ST0176 | STEEL COMP M1015 |
| ST0221 | STEEL COMP M1017 |
| ST0163 | STEEL COMP M1020 |
| ST0222 | STEEL COMP M1023 |
| ST0223 | STEEL COMP M1025 |
| ST0224 | STEEL COMP M1031 |
| ST0225 | STEEL COMP M1044 |
| ST0525 | STEEL COMP M50 |
| ST0177 | STEEL COMP MB1006 |
| ST0178 | STEEL COMP MB1010 |
| ST0497 | STEEL COMP MNV-30 |
| ST0498 | STEEL COMP MOV-30 |
| ST0499 | STEEL COMP MOV-40 |
| ST0046 | STEEL COMP MT1010 |
| ST0047 | STEEL COMP MT1015 |
| ST0048 | STEEL COMP MT1020 |
| ST0049 | STEEL COMP MTX1015 |
| ST0050 | STEEL COMP MTX1020 |
| ST0549 | STEEL COMP N |
| ST0291 | STEEL COMP O1 |
| ST0292 | STEEL COMP O2 |
| ST0288 | STEEL COMP O6 |
| ST0434 | STEEL COMP O7 |
| ST0435 | STEEL COMP S1 |
| ST0351 | STEEL COMP S2 |
| ST0436 | STEEL COMP S4 |
| ST0352 | STEEL COMP S5 |
| ST0437 | STEEL COMP S6 |
| ST0438 | STEEL COMP S7 |
| ST0494 | STEEL COMP TS8615 |
| ST0495 | STEEL COMP TS8620 |
| ST0496 | STEEL COMP TS8625 |
| ST0296 | STEEL COMP W108 |
| ST0297 | STEEL COMP W109 |
| ST0298 | STEEL COMP W110 |
| ST0299 | STEEL COMP W112 |
| ST0300 | STEEL COMP W114 |
| ST0306 | STEEL COMP W209 |
| ST0307 | STEEL COMP W210 |
| ST0308 | STEEL COMP W214 |
| ST0311 | STEEL COMP W310 |
| ST0439 | STEEL COMP W4 |
| ST0440 | STEEL COMP W5 |
| ST0704 | STEEL COMP XM-12 |
| ST0187 | STEEL COMP XM-13 |
| ST9851 | STEEL COMP XM-34 |
| STB000 | STEEL CORROSION RESISTING |
| STD000 | STEEL TOOL |
| ST0553 | STEEL UNS J02500 |
| ST0586 | STEEL UNS J03001 |
| ST1593 | STEEL UNS J03007 |
| ST0594 | STEEL UNS J03008 |
| ST0554 | STEEL UNS J03500 |
| ST0587 | STEEL UNS J03501 |
| ST0603 | STEEL UNS J03504 |
| ST0575 | STEEL UNS J04501 |
| ST1598 | STEEL UNS J05002 |
| ST0690 | STEEL UNS J21880 |
| ST1157 | STEEL UNS J42045 |
| ST1836 | STEEL UNS J92200 |
| ST1769 | STEEL UNS J92502 |
| ST0584 | STEEL UNS K02001 |
| ST0585 | STEEL UNS K02401 |
| ST0552 | STEEL UNS K02600 |
| ST1815 | STEEL UNS K02603 |
| ST0562 | STEEL UNS K02700 |
| ST0639 | STEEL UNS K03504 |
| ST1783 | STEEL UNS K05003 |
| ST0542 | STEEL UNS K11801 |
| ST0543 | STEEL UNS K11802 |
| ST0590 | STEEL UNS K12822 |
| ST1479 | STEEL UNS K15047 |
| ST1792 | STEEL UNS K19964 |
| ST0566 | STEEL UNS K21590 |
| ST0551 | STEEL UNS K23080 |
| ST0532 | STEEL UNS K24065 |
| ST1450 | STEEL UNS K24628 |
| ST0533 | STEEL UNS K32550 |
| ST1747 | STEEL UNS K44220 |
| ST1748 | STEEL UNS K44315 |
| ST0593 | STEEL UNS K52355 |
| ST0607 | STEEL UNS K91313 |
| ST0544 | STEEL UNS K92820 |
| ST0695 | STEEL UNS K92940 |
| ST0546 | STEEL UNS K93160 |
| ST0628 | STEEL UNS S34720 |
| ST0629 | STEEL UNS S34723 |
| ST1083 | STEEL UNS T12001 |
| TTA000 | TITANIUM ALLOY |
| TT0054 | TITANIUM ALLOY UNS R56440 |
| ZNA000 | ZINC ALLOY |
| ZN0015 | ZINC ALLOY UNS Z33520 |
| ZN0018 | ZINC ALLOY UNS Z35531 |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACK | BUSHING |
| 3AEE | OVERALL |
| 3AVU | SLEEVE |
| 3CYK | HUB |
| 3EDW | BORE SURFACE |
| 3EEB | SPLINE |
| 3EEC | TEETH |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
IF STYLE/REPLY CODE(s) BL WERE ENTERED FOR MRC ALPN, YOU MUST ANSWER MRC (CWNP)
ALPNDFACE TYPE
INDICATES THE TYPE OF FACE PROVIDED.
Enter the applicable reply code from the table below
(ALPNDBS)
| Table 1 |
| Reply Code (AG89) | Reply |
| BL | CONCAVE |
| BS | STRAIGHT |
CWNP*JTHROAT NOMINAL RADIUS
A NOMINAL MEASUREMENT OF THE THROAT RADIUS ACROSS THE FACE OF THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWNPJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) 1 OR 6 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWCD and AGJS)
IF STYLE/REPLY CODE(s) 3 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWCD and AGJS and CWQR)
IF STYLE/REPLY CODE(s) 2 OR 4 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWCD and AGJS and CWQL)
IF STYLE/REPLY CODE(s) 8 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWCD and AGJS and CWQL and CWRB)
IF STYLE/REPLY CODE(s) 11 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWCD and CWPS and CWNK and CWSH and AGJS)
IF STYLE/REPLY CODE(s) 12 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWCD and CWPS and CWNK and CWSH and AGJS and CWYN and CWNY)
IF STYLE/REPLY CODE(s) 36, 38, 46 OR 48 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCD and CWRM and AGJS and CWFR)
IF STYLE/REPLY CODE(s) 42 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCD and CWRM and AGJS and CWFR and CWQL and CWQR)
IF STYLE/REPLY CODE(s) 43 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWFR and CWCD and AGJS)
IF STYLE/REPLY CODE(s) 44 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWPS and AGJS and CWCD and CWFR and CWNK)
IF STYLE/REPLY CODE(s) 50 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWFR and CWCK and CWRM and CWMY)
IF STYLE/REPLY CODE(s) 53 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWFR and CWCK and CWRM and CWMY and CWCD)
IF STYLE/REPLY CODE(s) 62 OR 66 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWXD and BDJT and CWWF)
IF STYLE/REPLY CODE(s) 65 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and BDJT and CWFR and CWXD and CWWF)
IF STYLE/REPLY CODE(s) 67 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and BDJT and CWFR and CWXD and CWWF and CWQL)
IF STYLE/REPLY CODE(s) 5, 17 OR 21 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWCD and AGJS and CWQL)
IF STYLE/REPLY CODE(s) 25, 27, 29, 30, 39, 40, 47 OR 49 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCD and CWRM and AGJS and CWFR and CWQL)
IF STYLE/REPLY CODE(s) 54, 55 OR 56 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCD and AGJS and CWFR and CWRM and CWTN and CWQL)
IF STYLE/REPLY CODE(s) 57 OR 59 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWXD and BDJT and CWWF and CWQL)
IF STYLE/REPLY CODE(s) 58 OR 60 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and BDJT and CWFR and CWXD and CWWF and CWQL)
IF STYLE/REPLY CODE(s) 42A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCD and CWFR and AGJS and CWRM and CWQR)
IF STYLE/REPLY CODE(s) 49A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCD and AGJS and CWFR and CWRM and CWQL)
IF STYLE/REPLY CODE(s) 49B WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCD and AGJS and CWFR and CWNK and CWPS and CWRB and CWRF)
IF STYLE/REPLY CODE(s) 68 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRB and CWXD and BDJT and CWWF)
IF STYLE/REPLY CODE(s) 9, 16 OR 19 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWCD and AGJS and CWQR and CWQL)
IF STYLE/REPLY CODE(s) 28 OR 34 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCD and CWRM and AGJS and CWFR and CWQR and CWQL)
IF STYLE/REPLY CODE(s) 15, 18 OR 22 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWCD and AGJS and CWRB and CWQL)
IF STYLE/REPLY CODE(s) 31 OR 35 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCD and CWRM and AGJS and CWFR and CWRB and CWQL)
IF STYLE/REPLY CODE(s) 61 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and BDJT and CWFR and CWXD and CWWF and CWRB and CWQL)
IF STYLE/REPLY CODE(s) 10 OR 13 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWCD and AGJS and CWQR)
IF STYLE/REPLY CODE(s) 24, 26, 33 OR 41 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCD and CWRM and AGJS and CWFR and CWQR)
IF STYLE/REPLY CODE(s) 7 OR 14 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWCD and AGJS and CWRB)
IF STYLE/REPLY CODE(s) 20, 23 OR 32 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCD and CWRM and AGJS and CWFR and CWRB)
IF STYLE/REPLY CODE(s) 63 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWXD and BDJT and CWWF and CWRB)
IF STYLE/REPLY CODE(s) 64 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and BDJT and CWFR and CWXD and CWWF and CWRB)
IF STYLE/REPLY CODE(s) 45 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCD and CWRM and AGJS and CWFR and CWRB and CWRF)
IF STYLE/REPLY CODE(s) 51 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWFR and CWCK and CWRM and CWMY and CWRK and CWRP)
IF STYLE/REPLY CODE(s) 52 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWFR and CWCK and CWRM and CWMY and CWCD and CWRK and CWRP)
IF STYLE/REPLY CODE(s) 27A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWCD and AGJS)
IF STYLE/REPLY CODE(s) 37 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCD and CWRM and AGJS and CWFR and CWQL)
IF STYLE/REPLY CODE(s) 27B WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and CWCD and AGJS and CWQL)
IF STYLE/REPLY CODE(s) 49C WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWPS and AGJS and CWCD and CWFR and CWNK)
IF STYLE/REPLY CODE(s) 69 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWRM and BDJT and CWFR and CWXD and CWWF)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLL14)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AD10001 | 1 | HUBLESS |
| AD10010 | 10 | ONE FLUSH HUB, ONE RECESSED HUB |
| AD10011 | 11 | FLANGED END |
| AD10012 | 12 | FLANGED END WITH PILOT |
| AD10013 | 13 | RECESSED HUB |
| AD10014 | 14 | FLUSH HUB |
| AD10015 | 15 | CONE SHAPE BODY, PROTRUDING HUB |
| AD10016 | 16 | CONE SHAPE BODY, PROTRUDING HUB, RECESSED HUB |
| AD10017 | 17 | CONE SHAPE BODY, PROTRUDING HUBS |
| AD10018 | 18 | BELL SHAPE BODY, PROTRUDING HUB |
| AD10019 | 19 | BELL SHAPE BODY, PROTRUDING HUB, RECESSED HUB |
| AD10002 | 2 | PROTRUDING HUB |
| AD10020 | 20 | BELL SHAPE BODY, HUBLESS |
| AD10021 | 21 | BELL SHAPE BODY, PROTRUDING HUBS |
| AD10022 | 22 | PROTRUDING HUB, RECESSED BODY |
| AD10023 | 23 | CONE SHAPE BODY, HUBLESS |
| AD10024 | 24 | CONE SHAPE BODY, RECESSED HUB |
| AD10025 | 25 | CONE SHAPE BODY, PROTRUDING HUB |
| AD10026 | 26 | BELL SHAPE BODY, RECESSED HUB |
| AD10027 | 27 | BELL SHAPE BODY, PROTRUDING HUB |
| AD10028 | 27A | FLUSH HUB |
| AD10029 | 27B | PROTUDING HUBS |
| AD10030 | 28 | SIDE FACE, FRONT HUB RECESSED, BACK HUB PROTRUDING |
| AD10031 | 29 | SIDE FACE, FRONT HUB FLUSH, BACK HUB PROTRUDING |
| AD10003 | 3 | RECESSED HUBS |
| AD10032 | 30 | SIDE FACE, PROTRUDING HUBS |
| AD10033 | 31 | SIDE FACE, BACK HUB PROTRUDING |
| AD10034 | 32 | SIDE FACE, HUBLESS |
| AD10035 | 33 | SIDE FACE, RECESSED HUBS |
| AD10036 | 34 | SIDE FACE, FRONT HUB PROTRUDING, BACK HUB RECESSED |
| AD10037 | 35 | SIDE FACE, FRONT HUB PROTRUDING |
| AD10038 | 36 | PERIPHERAL FACE, FRONT HUB FLUSH |
| AD10039 | 37 | PERIPHERAL FACE, FRONT HUB PROTRUDING |
| AD10040 | 38 | PERIPHERAL FACE, HUBLESS |
| AD10041 | 39 | PERIPHERAL FACE, BACK HUB PROTRUDING |
| AD10004 | 4 | PROTRUDING HUBS |
| AD10042 | 40 | PERIPHERAL FACE, PROTRUDING HUBS |
| AD10043 | 41 | SIDE FACE, BACK HUB RECESSED |
| AD10044 | 42 | PERIPHERAL FACE, FRONT HUB RECESSED, BACK HUB PROTRUDING |
| AD10045 | 42A | PERIPHERAL FACE, FRONT HUB RECESSED |
| AD10047 | 43 | PLAIN RING |
| AD10048 | 44 | FLANGED RING |
| AD10049 | 45 | RECESSED RING |
| AD10050 | 46 | SOLID BACK RING, HUBLESS |
| AD10051 | 47 | SOLID BACK RING, PROTRUDING HUB, RECESSED HUB |
| AD10052 | 48 | CONE, HUBLESS |
| AD10053 | 49 | CONE, PROTRUDING HUB |
| AD10054 | 49A | SOLID BACK RING, PROTRUDING HUB |
| AD10055 | 49B | RECESSED RING FLANGE TYPE HUG |
| AD10056 | 49C | FLANGED RING |
| AD10005 | 5 | ONE PROTRUDING HUB, ONE FLUSH HUB |
| AD10057 | 50 | SQUARE OR RECTANGULAR |
| AD10058 | 51 | SQUARE OR RECTANGULAR, BOSS MOUNTED |
| AD10059 | 52 | ROUND, BOSS MOUNTED |
| AD10060 | 53 | ROUND |
| AD10061 | 54 | ADJUSTABLE TORQUE, COIL SPRING LOADED |
| AD10062 | 55 | ADJUSTABLE TORQUE, SPRING WASHER LOADED |
| AD10063 | 56 | FIXED TORQUE, SPRING WASHER LOADED |
| AD10064 | 57 | PROTRUDING HUBS |
| AD10065 | 58 | SIDE FACE, PROTRUDING HUBS |
| AD10066 | 59 | PROTRUDING HUB |
| AD10006 | 6 | FLUSH HUB |
| AD10067 | 60 | SIDE FACE, FRONT HUB FLUSH, BACK HUB PROTRUDING |
| AD10068 | 61 | BACK HUB PROTRUDING |
| AD10069 | 62 | HUBLESS |
| AD10070 | 63 | HUBLESS, RECESSED BODY |
| AD10071 | 64 | HUBLESS |
| AD10072 | 65 | FRONT HUB FLUSH |
| AD10073 | 66 | PLAIN RING |
| AD10074 | 67 | PROTRUDING HUBS |
| AD10075 | 68 | CONE SHAPE BODY, HUBLESS |
| AD10076 | 69 | BACK HUB PROTRUDING |
| AD10007 | 7 | HUBLESS, RECESSED BODY |
| AD10008 | 8 | PROTRUDING HUB, RECESSED BODY |
| AD10009 | 9 | ONE PROTRUDING HUB, ONE RECESSED HUB |
AGJS*JPITCH DIAMETER
A MEASUREMENT INDICATING THE DIAMETER-PITCH PER SPECIFIC MEASUREMENT SCALE OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGJSJAB2.0*;AGJSJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BDJT*JPITCH RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BDJTJAC2.0*;BDJTJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CWMY*JPITCH HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWMYJAB2.0*;CWMYJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CWFR*JNOMINAL OVERALL LENGTH
THE NOMINAL DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWFRJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWNK*JFLANGE NOMINAL DIAMETER
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWNKJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCD*JNOMINAL OUTSIDE DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF AN ITEM,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCDJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWNY*JPILOT NOMINAL LENGTH
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWNYJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWPS*JFLANGE NOMINAL THICKNESS
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWPSJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWRM*JFACE NOMINAL WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE FACE,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWRMJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWSH*JNOMINAL DISTANCE BETWEEN OUTER BODY FACE AND INNER FLANGE FACE
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWSHJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWTN*JNOMINAL DISTANCE BETWEEN FACE EDGE AND BODY END
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWTNJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWWF*JNOMINAL OUTSIDE RADIUS
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWWFJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWXD*JARC NOMINAL LENGTH
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWXDJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWYN*JPILOT NOMINAL DIAMETER
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWYNJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCK*JNOMINAL THICKNESS
A NOMINAL MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCKJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWQL*JNOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END
THE NOMINAL DISTANCE BETWEEN THE BODY FACE AND THE PROTRUDING HUB END.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWQL3AEUJA2.0*;CWQL3AEUJA2.0$JA2.0*;CWQL3AEUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWQR*JNOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END
THE NOMINAL DISTANCE BETWEEN THE BODY FACE AND THE RECESSED HUB END.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWQR3AEEJA2.0*;CWQR3AEEJA2.0$JA2.0*;CWQR3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWRB*JBODY RECESS NOMINAL DEPTH
A NOMINAL MEASUREMENT BETWEEN SPECIFIED POINTS ON THE RECESS OF THE BODY,IN DISTINCTION FROM HEIGHT.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWRB3AEUJA2.0*;CWRB3AEUJA2.0$JA2.0*;CWRB3AEUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3EEX | COUNTER BORE SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWRF*JBODY RECESS NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BODY RECESS,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWRF3AEEJA2.0*;CWRF3AEEJA2.0$JA2.0*;CWRF3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3EEX | COUNTER BORE SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWRK*JBOSS NOMINAL LENGTH
THE NOMINAL MEASUREMENT OF THE LONGEST DIMENSION OF A BOSS,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWRK3AEEJA2.0*;CWRK3AEEJA2.0$JA2.0*;CWRK3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWRP*JBOSS NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A BOSS,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWRP3AETJA2.0*;CWRP3AETJA2.0$JA2.0*;CWRP3AETJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AVU | SLEEVE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AVUDSLA000*;SFTT3AVUDSLA000$DPHA000*;SFTT3AVUDSLA000$$DPHA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AVU | SLEEVE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| ALB000 | ALUMINUM |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CNA000 | CARBON |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| DCA000 | DICHROMATE |
| DCC000 | DICHROMATE ZINC |
| ENA000 | ENAMEL |
| AUA000 | GOLD |
| GFA000 | GRAPHITE |
| IRA000 | IRIDIUM |
| FEA000 | IRON |
| LQA000 | LACQUER |
| LCB000 | LUBRICANT |
| LCC000 | LUBRICANT DRY FILM |
| MTB000 | MOLYBDENUM |
| NLA000 | NICKEL |
| LCA000 | OIL |
| XXB000 | OXIDE |
| XXA000 | OXIDE FILM |
| XXC000 | OXIDE IRON |
| PNA000 | PAINT |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PHB000 | PHOSPHATE IRON |
| PHC000 | PHOSPHATE MANGANESE |
| PHD000 | PHOSPHATE ZINC |
| PCA000 | PLASTIC |
| PCF000 | PLASTIC POLYAMIDE |
| PCB000 | PLASTIC POLYTETRAFLUOROETHYLENE |
| RHA000 | RHODIUM |
| SLA000 | SILICON |
| AGA000 | SILVER |
| SNA000 | TIN |
| SNB000 | TIN ALLOY |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
CQFM*JHARDNESS RATING
A NUMERIC VALUE THAT REFLECTS THE HARDNESS OF AN ITEM WHEN USED IN CONJUNCTION WITH A HARDNESS RATING SCALE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQFM3AEEJRBA2.0*;CQFM3AEEJRBA2.0$JRBA2.0*;CQFM3AEEJRBA2.0$$JRBA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CYK | HUB |
| 3EEC | TEETH |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC26) | Reply |
| BH | BRINELL HULTGREN |
| BS | BRINELL STANDARD |
| BT | BRINELL TUNGSTEN CARBIDE |
| RA | ROCKWELL A |
| RB | ROCKWELL B |
| RC | ROCKWELL C |
| RD | ROCKWELL D |
| RF | ROCKWELL F |
| RG | ROCKWELL G |
| RQ | ROCKWELL H |
| RS | ROCKWELL SUPERFICIAL 15-N |
| RU | ROCKWELL SUPERFICIAL 30-N |
| RN | ROCKWELL SUPERFICIAL 45-N |
| SA | SHORE DUROMETER A |
| SM | SHORE DUROMETER A-2 |
| SB | SHORE DUROMETER B |
| SE | SHORE DUROMETER C |
| SD | SHORE DUROMETER D |
| AF | VICKERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEVE*AKEYWAY QUANTITY
THE NUMBER OF KEYWAYS CONTAINED IN OR ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AEVEA10*)
AXHQ*AGROOVE QUANTITY
THE NUMBER OF GROOVES PROVIDED.
Enter the numeric reply with a minimum of one digit.
(AXHQA10*)
ATPC*ASTEP QUANTITY
THE NUMBER OF STEPS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(ATPCA10*)
CWNW*JMATING PITCH DIAMETER
A MEASUREMENT INDICATING THE DIAMETER-PITCH PER MEASUREMENT SCALE OF THE MATING ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWNWJAA2.0*;CWNWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CWPL*AMATING THREAD LEAD QUANTITY
THE NUMBER OF THREAD LEADS ON THE MATING ITEM.
Enter the numeric reply with a minimum of one digit.
(CWPLA10*)
CWWK*DPRECISION CLASSIFICATION
THE QUALITY DESIGNATION OF AN ITEM AS DETERMINED BY INDUSTRY,ASSOCIATION,OR MANUFACTURER STANDARDS.
Enter the applicable reply code from the table below
(CWWKDAS*;CWWKDBH$DBC*)
| Table 1 |
| Reply Code (AP71) | Reply |
| AJ | ACCURACY GRADE 10 |
| AK | ACCURACY GRADE 11 |
| AL | ACCURACY GRADE 12 |
| AB | ACCURACY GRADE 3 |
| AC | ACCURACY GRADE 4 |
| AD | ACCURACY GRADE 5 |
| AE | ACCURACY GRADE 6 |
| AF | ACCURACY GRADE 7 |
| AG | ACCURACY GRADE 8 |
| AH | ACCURACY GRADE 9 |
| BC | IS0 PRECISION CLASS 1 |
| BM | ISO PRECISION CLASS 10 |
| BN | ISO PRECISION CLASS 11 |
| BP | ISO PRECISION CLASS 12 |
| BD | ISO PRECISION CLASS 2 |
| BE | ISO PRECISION CLASS 3 |
| BF | ISO PRECISION CLASS 4 |
| BG | ISO PRECISION CLASS 5 |
| BH | ISO PRECISION CLASS 6 |
| BJ | ISO PRECISION CLASS 7 |
| BK | ISO PRECISION CLASS 8 |
| BL | ISO PRECISION CLASS 9 |
| AU | QUALITY NUMBER 10 |
| AV | QUALITY NUMBER 11 |
| AW | QUALITY NUMBER 12 |
| AX | QUALITY NUMBER 13 |
| AY | QUALITY NUMBER 14 |
| AZ | QUALITY NUMBER 15 |
| BA | QUALITY NUMBER 16 |
| AM | QUALITY NUMBER 3 |
| AN | QUALITY NUMBER 4 |
| AP | QUALITY NUMBER 5 |
| AQ | QUALITY NUMBER 6 |
| AR | QUALITY NUMBER 7 |
| AS | QUALITY NUMBER 8 |
| AT | QUALITY NUMBER 9 |
| BB | ULTRA PRECISION CLASS 1 |
IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWRS)
IF STYLE/REPLY CODE(s) 2 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWRS and CWRX)
IF STYLE/REPLY CODE(s) 3 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWSB)
IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWSF)
IF STYLE/REPLY CODE(s) 5 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWCN)
IF STYLE/REPLY CODE(s) 6 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWRS and ABSA and BDTX)
IF STYLE/REPLY CODE(s) 7 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWRS and ABSA)
IF STYLE/REPLY CODE(s) 8 OR 9 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (ADDW and BDYK)
IF STYLE/REPLY CODE(s) 10A, 10B, 10C OR 10D WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWRS and CWSN and CWSR)
IF STYLE/REPLY CODE(s) 11 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWSW)
IF STYLE/REPLY CODE(s) 12 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWSN and CWSR and CWSW)
IF STYLE/REPLY CODE(s) 13 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWSF)
IF STYLE/REPLY CODE(s) 14 OR 15 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWRS and CWTB and CWTG)
IF STYLE/REPLY CODE(s) 16 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWRS and CWRX and CWTB and CWTG)
IF STYLE/REPLY CODE(s) 17 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (THSD)
IF STYLE/REPLY CODE(s) 18 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (THSD and CWTK)
ANTP*LBORE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE BORE.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(ANTP3AETL18*;ANTP3AETL18$L14*;ANTP3AETL18$$L14*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3EEW | COUNTERBORE FIRST END |
| 3EEX | COUNTER BORE SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AD10082 | 1 | PLAIN |
| DR04149 | 10A | W/ KEYWAY |
| DR04150 | 10B | W/ 2 KEYWAYS |
| DR04151 | 10C | W/ 3 KEYWAYS |
| DR04152 | 10D | W/ 4 KEYWAYS |
| AD10092 | 11 | TAPERED |
| AD10093 | 12 | TAPERED W/KEYWAY |
| AD10094 | 13 | FLATTED SIDES |
| AD10095 | 14 | W/COUNTERBORE |
| AD10096 | 15 | W/STEPPED COUNTERBORE |
| AD10097 | 16 | PARTIAL W/COUNTERBORE |
| AD10098 | 17 | THREAD SERIES DESIGNATOR FULLY THREADED |
| AD10099 | 18 | THREAD SERIES DESIGNATOR PARTIALLY THREADED |
| AD10083 | 2 | PARTIAL |
| AD10084 | 3 | SQUARE |
| AD10087 | 4 | D |
| AD10086 | 5 | HEX |
| AD10085 | 6 | INVOLUTE SPLINE |
| AD10088 | 7 | STRAIGHT SPLINE |
| AD10089 | 8 | SERRATED |
| AD10090 | 9 | TAPERED SERRATED |
CWRS*JBORE NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A BORE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWRS3AEVJA2.0*;CWRS3AEVJA2.0$JA2.0*;CWRS3AEVJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3EEW | COUNTERBORE FIRST END |
| 3EEX | COUNTER BORE SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWRX*JBORE NOMINAL DEPTH
A NOMINAL MEASUREMENT BETWEEN SPECIFIED POINTS ON THE BORE,IN DISTINCTION FROM HEIGHT.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWRX3AEVJA2.0*;CWRX3AEVJA2.0$JA2.0*;CWRX3AEVJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWSB*JBORE NOMINAL WIDTH
A NOMINAL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A BORE,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWSB3AEVJA2.0*;CWSB3AEVJA2.0$JA2.0*;CWSB3AEVJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWSF*JNOMINAL RADIUS
THE NOMINAL DISTANCE FROM THE CENTER OF A CIRCULAR FIGURE OR BODY TO THE CIRCUMFERENCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWSFJA2.0*;CWSFJA2.0$JA2.0*;CWSFJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCN*JNOMINAL WIDTH ACROSS FLATS
THE SHORTEST NOMINAL STRAIGHT LINE BETWEEN FLATS,PERPENDICULAR TO THE HEIGHT OF AN ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCN3AEEJA2.0*;CWCN3AEEJA2.0$JA2.0*;CWCN3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
ABSA*ASPLINE QUANTITY
THE NUMBER OF SPLINES ON OR IN THE ITEM.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(ABSA3EERA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
BDTX*JSPLINE PITCH DIAMETER
A MEASUREMENT OF THE SPLINE PITCH DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BDTX3AETJAC2.0*;BDTX3AETJAC2.0$JAC2.0*;BDTX3AETJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADDW*ASERRATION QUANTITY
THE NUMBER OF SERRATIONS ON THE ITEM.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(ADDW3AEVA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
BDYK*JSERRATION PITCH DIAMETER
A MEASUREMENT INDICATING THE DIAMETER-PITCH PER MEASUREMENT SCALE OF THE SERRATION.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BDYK3AEEJAC2.0*;BDYK3AEEJAC2.0$JAC2.0*;BDYK3AEEJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CWSN*JKEYWAY NOMINAL WIDTH
A NOMINAL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A KEYWAY,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWSN3EERJA2.0*;CWSN3EERJA2.0$JA2.0*;CWSN3EERJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3EEW | COUNTERBORE FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWSR*JNOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM
THE NOMINAL DISTANCE FROM THE CENTER OF THE BORE TO THE BOTTOM OF THE KEYWAY(S).
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWSR3AEVJA2.0*;CWSR3AEVJA2.0$JA2.0*;CWSR3AEVJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3EEW | COUNTERBORE FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWSW*JTAPER MAJOR NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE LARGEST CIRCULAR CROSS SECTION OF THE TAPERED PORTION,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWSW3AEEJA2.0*;CWSW3AEEJA2.0$JA2.0*;CWSW3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EEW | COUNTERBORE FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWTB*JCOUNTERBORE NOMINAL DEPTH
A NOMINAL MEASUREMENT BETWEEN SPECIFIED POINTS OF THE COUNTERBORE,IN DISTINCTION FROM HEIGHT.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWTB3AEVJA2.0*;CWTB3AEVJA2.0$JA2.0*;CWTB3AEVJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EES | FIRST COUNTERBORE FIRST END |
| 3EET | FIRST COUNTERBORE SECOND END |
| 3EEW | COUNTERBORE FIRST END |
| 3EEX | COUNTER BORE SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWTG*JCOUNTERBORE NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE COUNTERBORE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWTG3AEVJA2.0*;CWTG3AEVJA2.0$JA2.0*;CWTG3AEVJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EES | FIRST COUNTERBORE FIRST END |
| 3EET | FIRST COUNTERBORE SECOND END |
| 3EEV | SECOND COUNTERBORE SECOND END |
| 3EEW | COUNTERBORE FIRST END |
| 3EEX | COUNTER BORE SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) AM, JC, JE, JF, NC, NE OR NF WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD and AAJF)
IF STYLE/REPLY CODE(s) SJ, SK, SM OR SS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CQQR and AAJF) or (CQJX and CTTC and AAJF) or (CQJX and AAJF)
IF STYLE/REPLY CODE(s) EM OR MJ WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CQQR and CTTC and AAJF)
IF STYLE/REPLY CODE(s) NP WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJF)
IF STYLE/REPLY CODE(s) NJ OR UN WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJD and AAJF)
IF STYLE/REPLY CODE(s) JF OR NS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJD and AAJF) or (CQJX and CMLP and AAJF)
IF STYLE/REPLY CODE(s) NM WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJF) or (CQJX and CQQR and AAJF)
IF STYLE/REPLY CODE(s) TT WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJD and AAJF) or (CQJX and CMLP and AAJF)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(THSD3AETDNP*;THSD3AETDNP$DSS*;THSD3AETDNP$$DSS*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| AM | ACME |
| TT | BUTTRESS |
| SM | ISO M |
| SS | ISO S |
| EM | M |
| MJ | MJ |
| NP | NPT |
| SJ | SI |
| SK | SI-M |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNJ |
| JC | UNJC |
| JE | UNJEF |
| JF | UNJF |
| JS | UNJS |
| NM | UNM |
| NS | UNS |
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJX3AEVJA2.0*;CQJX3AEVJA2.0$JA2.0*;CQJX3AEVJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(CMLP3AEUAM0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEU | SECOND END |
| 3EER | BETWEEN BODY AND FLANGE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CQQR*BTHREAD PITCH IN MILLIMETERS
A MEASUREMENT OF DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(CQQR3AEEB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(AAJD3AEEAA0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CTTC*JTHREAD TOLERANCE CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING ESTABLISHED PITCH AND CREST DIAMETER TOLERANCE POSITION AND GRADE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a alpha-numeric reply with a minimum of one character.
(CTTC3AETJEXT2.0*;CTTC3AETJEXT2.0$JEXT2.0*;CTTC3AETJEXT2.0$$JEXT2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN73) | Reply |
| EXT | EXTERNAL |
| NTE | INTERNAL |
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AAJF3AEEDAAL*;AAJF3AEEDAAL$DAAG*;AAJF3AEEDAAL$$DAAG*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
CWTK*JNOMINAL THREAD LENGTH
A NOMINAL MEASUREMENT OF THE EXTENT OF THREADS,INCLUDING INCOMPLETE THREADS,ALONG A LINE PARALLEL TO THE LONGITUDINAL THREAD AXIS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWTK3AETJA2.0*;CWTK3AETJA2.0$JA2.0*;CWTK3AETJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) 1 OR 5 WERE ENTERED FOR MRC CWTR, YOU MUST ANSWER MRC (CWTX)
IF STYLE/REPLY CODE(s) 2 WERE ENTERED FOR MRC CWTR, YOU MUST ANSWER MRC (CWTX and CWWC)
IF STYLE/REPLY CODE(s) 4A WERE ENTERED FOR MRC CWTR, YOU MUST ANSWER MRC (CWWH and CWWN and CWWS and CWXB)
IF STYLE/REPLY CODE(s) 4B WERE ENTERED FOR MRC CWTR, YOU MUST ANSWER MRC (CWWH and CWWN and CWWS and CWXB and CWXG and CWXL)
IF STYLE/REPLY CODE(s) 4C WERE ENTERED FOR MRC CWTR, YOU MUST ANSWER MRC (CWWH and CWWN and CWWS and CWXB and CWXG and CWXL and CWXP and CWXT)
IF STYLE/REPLY CODE(s) 6A WERE ENTERED FOR MRC CWTR, YOU MUST ANSWER MRC (CWTX and CWXY and CWYD and CWYL)
IF STYLE/REPLY CODE(s) 6B WERE ENTERED FOR MRC CWTR, YOU MUST ANSWER MRC (CWTX and CWXY and CWYD and CWYL)
CWTR*LHUB STYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE HUB.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(CWTR3AEEL4B*;CWTR3AEEL4B$L7*;CWTR3AEEL4B$$L7*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AD10100 | 1 | PLAIN |
| AD10101 | 2 | SPLIT |
| AD10102 | 3 | THREADED |
| DR00266 | 4A | 1 STEP |
| DR00267 | 4B | 2 STEPS |
| DR00268 | 4C | 3 STEPS |
| AD10105 | 5 | PINNED |
| DR00269 | 6A | 1 GROOVE |
| DR00270 | 6B | 2 GROOVES |
| AD10106 | 7 | EXTERNALLY SPLINED, STRAIGHT SPLINES |
| AD10107 | 8 | EXTERNALLY SPLINED, INVOLUTE SPLINES |
CWTX*JHUB NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A HUB,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWTX3AEVJA2.0*;CWTX3AEVJA2.0$JA2.0*;CWTX3AEVJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWWC*JCLAMPING SURFACE NOMINAL LENGTH
A NOMINAL MEASUREMENT OF THE LONGEST DIMENSION OF A CLAMPING SURFACE,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWWC3AETJA2.0*;CWWC3AETJA2.0$JA2.0*;CWWC3AETJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWWH*JEND NOMINAL LENGTH
A NOMINAL MEASUREMENT OF THE LONGEST DIMENSION OF THE END OF THE ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWWH3AEVJA2.0*;CWWH3AEVJA2.0$JA2.0*;CWWH3AEVJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWWN*JEND NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE END OF THE ITEM,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWWN3AEUJA2.0*;CWWN3AEUJA2.0$JA2.0*;CWWN3AEUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWWS*JFIRST STEP NOMINAL LENGTH
A NOMINAL MEASUREMENT OF THE LONGEST DIMENSION OF THE FIRST STEP,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWWS3HOUJA2.0*;CWWS3HOUJA2.0$JA2.0*;CWWS3HOUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWXB*JFIRST STEP NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE FIRST STEP,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWXB3AETJA2.0*;CWXB3AETJA2.0$JA2.0*;CWXB3AETJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWXG*JSECOND STEP NOMINAL LENGTH
A NOMINAL MEASUREMENT OF THE LONGEST DIMENSION OF THE SECOND STEP,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWXG3AETJA2.0*;CWXG3AETJA2.0$JA2.0*;CWXG3AETJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWXL*JSECOND STEP NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE SECOND STEP,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWXL3AEEJA2.0*;CWXL3AEEJA2.0$JA2.0*;CWXL3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWXP*JTHIRD STEP NOMINAL LENGTH
A NOMINAL MEASUREMENT OF THE LONGEST DIMENSION OF THE THIRD STEP,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWXP3AEEJA2.0*;CWXP3AEEJA2.0$JA2.0*;CWXP3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWXT*JTHIRD STEP NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE THIRD STEP,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWXT3AETJA2.0*;CWXT3AETJA2.0$JA2.0*;CWXT3AETJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWXY*JFIRST GROOVE NOMINAL WIDTH
A NOMINAL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE FIRST GROOVE,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWXY3AEEJA2.0*;CWXY3AEEJA2.0$JA2.0*;CWXY3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEU | SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWYD*JFIRST GROOVE NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE FIRST GROOVE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWYD3AEEJA2.0*;CWYD3AEEJA2.0$JA2.0*;CWYD3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEU | SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWYL*JNOMINAL DISTANCE FROM END TO FIRST GROOVE
THE NOMINAL DISTANCE FROM THE END OF THE ITEM TO THE FIRST GROOVE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWYL3AEUJA2.0*;CWYL3AEUJA2.0$JA2.0*;CWYL3AEUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEU | SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) LJ WERE ENTERED FOR MRC ABSX, YOU MUST ANSWER MRC (CTQY)
ABSX*DATTACHMENT METHOD
THE MEANS USED TO ATTACH THE ITEM.
Enter the applicable reply code from the table below
(ABSXDAB*;ABSXDED$$DCC*)
| Table 1 |
| Reply Code (AB47) | Reply |
| AB | CLAMP |
| TU | CLAMP TAB |
| TV | INTERNAL RING GROOVE |
| LJ | MOUNTING HOLE |
| AD | PRESS FIT |
| BT | SETSCREWS |
| ED | SLIP ON COLLAR |
| CJ | SLOT |
| TX | SNAP RING |
| CC | SOLDERED |
| TP | STAKED |
IF STYLE/REPLY CODE(s) AB, AC OR AW WERE ENTERED FOR MRC CTQY, YOU MUST ANSWER MRC (CWZK)
IF STYLE/REPLY CODE(s) AX WERE ENTERED FOR MRC CTQY, YOU MUST ANSWER MRC (CMLK)
CTQY*JMOUNTING HOLE TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF MOUNTING HOLES PROVIDED ON THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit.
(CTQY3EEGJAC2*;CTQY3EEGJAC2$$JAC3*;CTQY3EEGJAC2$JAC2*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EED | AXIALLY THROUGH BODY FIRST END |
| 3EEF | AXIALLY THROUGH FLANGE |
| 3EEG | AXIALLY THROUGH HUB FIRST END |
| 3EEH | AXIALLY THROUGH HUB SECOND END |
| 3EEJ | TRANSVERSELY THROUGH FACE |
| 3EEK | TRANSVERSELY THROUGH FLANGE |
| 3EEO | TRANSVERSELY THROUGH HUB FIRST END |
| 3EEP | TRANSVERSELY THROUGH HUB SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH37) | Reply |
| AB | COUNTERBORED |
| AC | COUNTERSUNK |
| AW | PLAIN |
| BE | TAPERED |
| AX | THREADED |
CWZK*JMOUNTING HOLE NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWZK3EEFJA2.0*;CWZK3EEFJA2.0$JA2.0*;CWZK3EEFJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EED | AXIALLY THROUGH BODY FIRST END |
| 3EEF | AXIALLY THROUGH FLANGE |
| 3EEG | AXIALLY THROUGH HUB FIRST END |
| 3EEJ | TRANSVERSELY THROUGH FACE |
| 3EEO | TRANSVERSELY THROUGH HUB FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) AM, JC, JE, JF, NC, NE, NF OR NP WERE ENTERED FOR MRC CMLK, YOU MUST ANSWER MRC (CQLT)
IF STYLE/REPLY CODE(s) SJ, SK, SM OR SS WERE ENTERED FOR MRC CMLK, YOU MUST ANSWER MRC (CQLT and CRNZ) or (CQLT and CWKJ) or (CQLT)
IF STYLE/REPLY CODE(s) EM OR MJ WERE ENTERED FOR MRC CMLK, YOU MUST ANSWER MRC (CQLT and CRNZ and CWKJ)
IF STYLE/REPLY CODE(s) NJ OR UN WERE ENTERED FOR MRC CMLK, YOU MUST ANSWER MRC (CQLT and CMLM)
IF STYLE/REPLY CODE(s) JS OR NS WERE ENTERED FOR MRC CMLK, YOU MUST ANSWER MRC (CQLT and CMLM)
IF STYLE/REPLY CODE(s) NM WERE ENTERED FOR MRC CMLK, YOU MUST ANSWER MRC (CQLT and CMLM) or (CQLT and CRNZ)
CMLK*DMOUNTING HOLE THREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR THE SPECIFIC DIAMETER OF A THREADED MOUNTING HOLE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CMLK3AEEDJE*;CMLK3AEEDJE$DJF*;CMLK3AEEDJE$$DJF*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EED | AXIALLY THROUGH BODY FIRST END |
| 3EEG | AXIALLY THROUGH HUB FIRST END |
| 3EEH | AXIALLY THROUGH HUB SECOND END |
| 3EEJ | TRANSVERSELY THROUGH FACE |
| 3EEK | TRANSVERSELY THROUGH FLANGE |
| 3EEO | TRANSVERSELY THROUGH HUB FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| AM | ACME |
| SM | ISO M |
| SS | ISO S |
| EM | M |
| MJ | MJ |
| NP | NPT |
| SJ | SI |
| SK | SI-M |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNJ |
| JC | UNJC |
| JE | UNJEF |
| JF | UNJF |
| JS | UNJS |
| NM | UNM |
| NS | UNS |
CQLT*JMOUNTING HOLE NOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE MOUNTING HOLE THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQLT3EEHJA2.0*;CQLT3EEHJA2.0$JA2.0*;CQLT3EEHJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EED | AXIALLY THROUGH BODY FIRST END |
| 3EEG | AXIALLY THROUGH HUB FIRST END |
| 3EEH | AXIALLY THROUGH HUB SECOND END |
| 3EEJ | TRANSVERSELY THROUGH FACE |
| 3EEK | TRANSVERSELY THROUGH FLANGE |
| 3EEO | TRANSVERSELY THROUGH HUB FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CMLM*AMOUNTING HOLE THREAD QUANTITY PER INCH
THE NUMBER OF MOUNTING HOLE THREADS PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(CMLM3EEDAF7)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EED | AXIALLY THROUGH BODY FIRST END |
| 3EEG | AXIALLY THROUGH HUB FIRST END |
| 3EEO | TRANSVERSELY THROUGH HUB FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CRNZ*BMOUNTING HOLE THREAD PITCH IN MILLIMETERS
THE DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT MOUNTING HOLE THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(CRNZ3AEEB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EEG | AXIALLY THROUGH HUB FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CWKJ*JMOUNTING HOLE THREAD TOLERANCE CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING ESTABLISHED PITCH AND CREST DIAMETER TOLERANCE POSITIONS AND GRADES OF A MOUNTING HOLE THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a alpha-numeric reply with a minimum of one character.
(CWKJ3AEEJNTE2.0*;CWKJ3AEEJNTE2.0$JNTE2.0*;CWKJ3AEEJNTE2.0$$JNTE2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EEG | AXIALLY THROUGH HUB FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN73) | Reply |
| EXT | EXTERNAL |
| NTE | INTERNAL |
CWZN*JBOLT HOLE CIRCLE NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A BOLT HOLE CIRCLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWZN3EEOJA2.0*;CWZN3EEOJA2.0$JA2.0*;CWZN3EEOJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EED | AXIALLY THROUGH BODY FIRST END |
| 3EEG | AXIALLY THROUGH HUB FIRST END |
| 3EEO | TRANSVERSELY THROUGH HUB FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
TMQY*JFURNISHED ITEMS AND QUANTITY
THE NAME AND NUMBER OF THOSE PARTS FURNISHED WITH THE ITEM OF SUPPLY THAT HAVE NOT BEEN SPECIFIED ELSEWHERE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TMQYJAMN2*;TMQYJAMN2$$JAMN3*)
| Table 1 |
| Reply Code (AB28) | Reply |
| BKY | BEARING |
| ABR | BOLT |
| BGU | BORE INSERT |
| AJM | BUSHING |
| BBX | CAP SCREW |
| AMN | CLAMP |
| ATF | COLLAR |
| AKR | DOWEL PIN |
| BGV | EXTERNALLY LUBRICATED BEARING |
| BGW | FRICTION DISC |
| ACN | GASKET |
| AHK | KEY |
| BGX | LOCK PIN |
| ACB | LOCK WASHER |
| ADW | LOCKNUT |
| BGY | LUBRICANT IMPREGNATED BEARING |
| ABW | NUT |
| AEA | PLUG |
| BGZ | POST |
| AFF | RETAINING RING |
| ATC | RIVET |
| AFJ | SETSCREW |
| BHA | SHOULDER PIN |
| ATD | SPACER |
| AMY | SPRING |
| AFW | SPRING PIN |
| BHB | STOP PIN |
| AFN | STUD |
| AFY | TAPERED PIN |
| AJW | WASHER |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCPC*;CBBLDCPF$$DBRP*)
| Table 1 |
| Reply Code (AN47) | Reply |
| CPC | ALIGNMENT HOLE |
| AEQ | CASEHARDENED |
| CPK | CHAMFERED TEETH |
| AQG | FILLED MARKINGS |
| CPD | GROOVE |
| CPE | INTEGRAL KEY |
| CPF | INTEGRAL TAPERED KEY |
| CPG | KNURLED KNOB |
| CDT | LUBRICATION GROOVE |
| CDW | LUBRICATION HOLE |
| CPH | RETAINING RING GROOVE |
| BRP | SPECIAL MARKING |
| CPJ | TAPERED KEYWAY |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDG4)
| Table 1 |
| Reply Code (EN02) | Reply |
| G4 | COMPREHENSIVE PROCUREMENT GUIDELINE - VEHICULAR PRODUCTS - REBUILT VEHICULAR PARTS |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDPDA000*;PRMTDAUA000$DPTA000*;PRMTDAUA000$$DPTA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJPDA000E2.0*;PMWTJPDA000E2.0$$JPDA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAZA0002.0*;PMLCJAZA0002.0$JAZA0002.0*;PMLCJAZA0002.0$$JAZA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information