A group of gear(s) and/or worm(s), of fixed ratio, specifically designed for the purpose of decreasing the speed from the driver(s) to the driven shaft or shafts; having no reversing feature except by reversing the prime mover. See also TRANSMISSION (as modified) and GEARCASE-MOTOR.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED05372*)
APGFDDESIGN TYPE
INDICATES THE DESIGN TYPE OF THE ITEM.
Enter the applicable reply code from the table below
(APGFDCAT)
| Table 1 |
| Reply Code (AK54) | Reply |
| CAN | COMPOUND PLANETARY |
| CAP | COMPOUND REDUCTION |
| CAQ | COMPOUND WORM GEAR |
| CAR | DIFFERENTIAL PLANETARY REDUCTION |
| CAS | DUAL INCREASING |
| CAT | DUAL REDUCTION |
| CAW | FIVE CLUSTER REDUCTION |
| CAX | MULTIPLE REDUCTION |
| CAY | QUADRUPLE REDUCTION |
| CAZ | QUINTUPLE REDUCTION |
| CBA | SEVEN STEP REDUCTION |
| CBB | SINGLE INCREASING |
| CBC | SINGLE REDUCTION |
| CBD | SIX STEP REDUCTION |
| CBE | THREE STAGES OF QUADRUPLE REDUCTION |
| CBF | THREE STAGES OF QUINTUPLE REDUCTION |
| CBG | TRIPLE REDUCTION |
BSQGDGEAR TYPE
INDICATES THE TYPE OF GEAR PROVIDED.
Enter the applicable reply code from the table below
(BSQGDBE*;BSQGDAN$$DAH*)
| Table 1 |
| Reply Code (AH55) | Reply |
| AH | BEVEL |
| AN | HELICAL |
| BE | SPUR |
| BJ | WORM |
| BK | WORM WHEEL |
BSQHGTOTAL RATIO
THE TOTAL RATIO OF THE INPUT REVOLUTIONS TO THE OUTPUT REVOLUTIONS OF THE ITEM.
Enter clear text.
(BSQHGCLEARTEXT)
BSQK*DLUBRICATION SYSTEM
THE SYSTEM USED FOR LUBRICATING THE ITEM.
Enter the applicable reply code from the table below
(BSQKDAAQ*;BSQKDAAP$DAAB*)
| Table 1 |
| Reply Code (AN42) | Reply |
| AAB | BRUSH |
| AAC | FLASH DUPLICATION |
| AAD | FLOOD |
| AAE | GREASE FILM |
| AAF | GREASE PRESSURE |
| AAG | GREASE RESERVOIR |
| AAH | GREASED BALL BEARING |
| AAJ | MANUAL |
| AAK | OIL BATH |
| AAL | PACKED IN GREASE |
| AAM | PERMANENT |
| AAN | PREGREASED |
| AAP | PRESSURE |
| AAR | SEALED LIFETIME |
| AAQ | SEALED OIL BEARING |
| AAS | SELF LUBRICATING |
| AAT | SLUSH |
| AAW | SPLASH |
| AAX | STATIC |
BSWM*DINPUT SHAFT TYPE
INDICATES THE TYPE OF INPUT SHAFT PROVIDED.
Enter the applicable reply code from the table below
(BSWMDCA*;BSWMDBD$DCC*)
| Table 1 |
| Reply Code (AF58) | Reply |
| BS | COUPLING |
| BT | FLANGE |
| BW | INTERNAL GEAR |
| BA | KEYWAY |
| BX | PINION |
| BY | QUILL |
| BZ | ROUND, FLATTED |
| CA | SHOULDERED |
| CB | SPLINE |
| AX | STEPPED |
| BD | STRAIGHT |
| CC | STRAIGHT W/COUPLING |
| CD | STRAIGHT W/KEYWAY |
| CE | STRAIGHT W/PERPENDICULAR FLATS AT END |
| CF | TAPER |
BSWN*AINPUT SHAFT QUANTITY
THE NUMBER OF INPUT SHAFTS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BSWNA10*)
BSWQ*DOUTPUT SHAFT TYPE
INDICATES THE TYPE OF OUTPUT SHAFT PROVIDED.
Enter the applicable reply code from the table below
(BSWQDBX*;BSWQDBW$DBT*;BSWQDBW$$DBT*)
| Table 1 |
| Reply Code (AF58) | Reply |
| BS | COUPLING |
| BT | FLANGE |
| BW | INTERNAL GEAR |
| BA | KEYWAY |
| BX | PINION |
| BY | QUILL |
| BZ | ROUND, FLATTED |
| CA | SHOULDERED |
| CB | SPLINE |
| AX | STEPPED |
| BD | STRAIGHT |
| CC | STRAIGHT W/COUPLING |
| CD | STRAIGHT W/KEYWAY |
| CE | STRAIGHT W/PERPENDICULAR FLATS AT END |
| CF | TAPER |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDEXJ)
| Table 1 |
| Reply Code (AN47) | Reply |
| EXJ | SHIPBOARD USAGE DESIGN |
BSWR*AOUTPUT SHAFT QUANTITY
THE NUMBER OF OUTPUT SHAFTS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BSWRA10*)
BSWT*GSHAFT POSITION
THE POSITION OF THE SHAFT(S) ON THE ITEM.
Enter clear text.
(BSWTGCLEARTEXT)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| CS | CONSTRUCTION |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| FN | FINISH |
| FM | FORM |
| FA | FORMULA |
| GR | GRADE |
| GP | GROUP |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| NR | NUMBER |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| QA | QUALITY |
| RN | RANGE |
| RT | RATING |
| RF | REFERENCE NUMBER |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information