A form usually made of wood or metal shaped like a person's foot, designed for the manufacturing of footwear. It may be the master model from which the turning model is made in limited quantities, or the turning model from which the production lasts are manufactured in greater quantities.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED04718*)
APGEDFOOTWEAR FOR WHICH DESIGNED
THE SPECIFIC FOOTWEAR FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(APGEDABP*;APGEDABQ$$DABF*)
| Table 1 |
| Reply Code (AK46) | Reply |
| ABD | BOOT, CLIMBERS |
| ABE | BOOT, COLD WEATHER |
| AAB | BOOT, COMBAT |
| ABF | BOOT, EXTREME COLD WEATHER |
| AAG | BOOT, FLYING |
| ABG | BOOT, HOT WEATHER |
| ABH | BOOT, PARACHUTISTS |
| ABJ | BOOT, SAFETY |
| AAP | BOOT, SKI-MOUNTAIN |
| ABK | BOOT, SUBMARINE DECK EXPOSURE |
| ABL | SHOE, CONDUCTIVE |
| ABM | SHOE, ELECTRICAL HAZARDS PROTECTIVE |
| ABN | SHOE, MENS |
| ABP | SHOE, NONSPARKING |
| AAT | SHOE, SAFETY |
| AAX | SHOE, SERVICE |
| ABQ | SHOE, WOMENS |
APGF*DDESIGN TYPE
INDICATES THE DESIGN TYPE OF THE ITEM.
Enter the applicable reply code from the table below
(APGFDFLM*;APGFDFLQ$DFLN*)
| Table 1 |
| Reply Code (AK54) | Reply |
| AAB | BLUCHER |
| AAX | CHUKKA BLUCHER |
| FLM | CUBAN |
| CBH | FULL |
| FLX | FULL BEVELED BREAST |
| AAY | FWU-3P |
| FLN | FWU-8/P |
| CBJ | HALF |
| AAZ | HIGH BLUCHER |
| FLP | JUNIOR |
| AYD | LOW BLUCHER |
| FLQ | ORTHOPEDIC |
| FLR | STRAIGHT BREAST |
| FLS | STRAIGHT BREAST W/TRUNCATED CORNERS |
| ABD | US MIL 1 |
| ABE | US MIL 5 |
| FLT | US MIL 7 |
| ABC | US MIL W1 |
| FLW | WHOLE |
CSYPDLAST TYPE FOR WHICH DESIGNED
INDICATES THE LAST TYPE FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(CSYPDGK*;CSYPDGR$DGK*)
| Table 1 |
| Reply Code (AD34) | Reply |
| GK | PLASTIC |
| GR | WOOD |
CSYFJDESIGN CONFIGURATION AND QUANTITY
THE BASIC SHAPE,APPLICATION AND SURFACE FEATURES OF AN ITEM,AND THE NUMBER OF EACH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CSYFJDB2*;CSYFJDB2$$JDB3*;CSYFJDB2$JDB2*)
| Table 1 |
| Reply Code (AA43) | Reply |
| CP | BACK STAY |
| CQ | BACK STAY MARKER |
| CR | BELLOWS WING |
| CS | BOTTOM FINISHING PATTERN |
| CT | BOTTOM SLIDE FASTENER INSERT |
| CW | BOTTOM TURNING PATTERN |
| CX | BOX TOE |
| FP | COLLAR |
| CY | COUNTER |
| CZ | COUNTER POCKET |
| DA | COUNTER POCKET-BACK STAY |
| DB | EYELET STAY |
| DC | EYELET STAY MARKER |
| FQ | FILLER |
| BM | FINISHING PATTERN |
| BN | FINISHING TEMPLATE |
| DD | FRONT QUARTER FACING |
| DE | GUSSET |
| FM | GUSSET BELLOW |
| DF | GUSSET INSULATION |
| DG | GUSSET LINING |
| DH | GUSSET MARKER |
| DJ | GUSSET/SPEED LACER ROW STAY |
| DK | HEEL CURVE FINISHING TEMPLATE |
| DL | HEEL CURVE TURNING TEMPLATE |
| FR | HEEL PAD |
| DM | HOOK-PILE FASTENER TAPE |
| DN | INSIDE COUNTER POCKET |
| DP | INSIDE QUARTER |
| DQ | INSIDE QUARTER DOUBLER |
| DR | INSIDE QUARTER LINING |
| DS | INSIDE VAMP |
| DT | INSIDE VAMP DOUBLER |
| DW | INSIDE VAMP MARKER |
| DX | INSOLE |
| DY | INSOLE INSULATION |
| DZ | INSOLE ROUNDING |
| EA | LINING |
| EB | MARKER |
| EC | MARKER EYELET |
| BP | MASTER MODEL |
| BQ | MASTER PATTERN |
| ED | OUTSIDE COUNTER POCKET |
| EE | OUTSIDE QUARTER |
| EF | OUTSIDE QUARTER DOUBLER |
| EG | OUTSIDE QUARTER LINING |
| FK | OUTSIDE VAMP |
| EH | OUTSIDE VAMP DOUBLER |
| FL | OUTSIDE VAMP MARKER |
| BR | PATTERN |
| EJ | PLUG TONGUE BACKER |
| EK | PLUG TONGUE MARKER |
| EL | QUARTER |
| EM | QUARTER DOUBLER |
| EN | QUARTER INSULATION |
| EP | QUARTER LINING |
| EQ | QUARTER MARKER |
| ER | SHANK COVER |
| ES | SLIDE FASTENER MARKER |
| BS | TEMPLATE |
| ET | TOE CURVE TEMPLATE |
| EW | TOE CUSHION |
| FN | TOE TIP |
| EX | TONGUE |
| EY | TONGUE LINING |
| EZ | TOP BAND |
| FA | TOP FACING |
| FB | TOP FACING CUFF |
| FC | TOP SLIDE FASTENER INSERT |
| BT | TURNING MODEL |
| CH | TURNING PATTERN |
| BW | TURNING TEMPLATE |
| FD | VAMP |
| FE | VAMP DOUBLER |
| FF | VAMP INSULATION |
| FG | VAMP LINING |
| FH | VAMP MARKER |
| FJ | VAMP PLUG/TONGUE MARKER |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDWDC000*;MATTDWDC000$DWDC000*;MATTDWDC000$$DWDC000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| WDC000 | WOOD |
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable reply code from the table below
(ADZCDAAX*;ADZCDACH$$DABX*)
| Table 1 |
| Reply Code (AA65) | Reply |
| ABX | ABRASION RESISTANT |
| AAC | CORROSION RESISTANT |
| AAL | FUEL RESISTANT |
| AAX | OIL RESISTANT |
| ACH | WATER REPELLENT |
APXNDFOOTWEAR SIZE
A DESIGNATION INDICATING ONE OF A SERIES OF GRADUATED CLASSIFICATIONS OF MANUFACTURED FOOTWEAR ITEMS IDENTIFIED BY NUMBER,LETTER,AND/OR WORD,EACH REPRESENTING A DIMENSION.
Enter the applicable reply code from the table below
(APXNDBQS*;APXNDBTQ$DBSW*)
| Table 1 |
| Reply Code (AF81) | Reply |
| AAB | 1 |
| ABQ | 10 |
| BWT | 10 NARROW |
| ABT | 10 REGULAR |
| GTA | 10 TO 11 |
| KHA | 10 TO 12 C |
| BWW | 10 WIDE |
| BWX | 10 X-NARROW |
| BWY | 10 X-WIDE |
| BXP | 10-1/2 NARROW |
| BXQ | 10-1/2 REGULAR |
| BXR | 10-1/2 WIDE |
| BXS | 10-1/2 X-NARROW |
| BXT | 10-1/2 X-WIDE |
| BXD | 10-1/2A |
| BXC | 10-1/2AA |
| BXB | 10-1/2AAA |
| BXA | 10-1/2AAAA |
| BXE | 10-1/2B |
| BXF | 10-1/2C |
| BXG | 10-1/2D |
| BXH | 10-1/2E |
| BXJ | 10-1/2EE |
| BXK | 10-1/2EEE |
| BXL | 10-1/2EEEE |
| BXM | 10-1/2F |
| BWH | 10A |
| BWG | 10AA |
| BWF | 10AAA |
| BWE | 10AAAA |
| BWJ | 10B |
| BWK | 10C |
| BWL | 10D |
| BWM | 10E |
| BWN | 10EE |
| BWP | 10EEE |
| BWQ | 10EEEE |
| ABZ | 11 |
| BYM | 11 NARROW |
| ACC | 11 REGULAR |
| GTC | 11 TO 12 |
| KHB | 11 TO 13 D |
| BYN | 11 WIDE |
| BYP | 11 X-NARROW |
| BYQ | 11 X-WIDE |
| BZJ | 11-1/2 NARROW |
| BZK | 11-1/2 REGULAR |
| BZL | 11-1/2 WIDE |
| BZM | 11-1/2 X-NARROW |
| BZN | 11-1/2 X-WIDE |
| BYX | 11-1/2A |
| BYW | 11-1/2AA |
| BYY | 11-1/2B |
| BYZ | 11-1/2C |
| BZA | 11-1/2D |
| BZB | 11-1/2E |
| BZC | 11-1/2EE |
| BZD | 11-1/2EEE |
| BYA | 11A |
| BXZ | 11AA |
| BXX | 11AAAA |
| BYB | 11B |
| BYC | 11C |
| BYD | 11D |
| BYE | 11E |
| BYF | 11EE |
| BYG | 11EEE |
| ACG | 12 |
| CAH | 12 NARROW |
| ACK | 12 REGULAR |
| EHC | 12 TO 13 |
| CAJ | 12 WIDE |
| CAK | 12 X-NARROW |
| CAL | 12 X-WIDE |
| CBE | 12-1/2 NARROW |
| ACS | 12-1/2 REGULAR |
| CBF | 12-1/2 WIDE |
| CBG | 12-1/2 X-NARROW |
| CBH | 12-1/2 X-WIDE |
| CAR | 12-1/2A |
| CAS | 12-1/2B |
| CAT | 12-1/2C |
| CAW | 12-1/2D |
| CAX | 12-1/2E |
| CAY | 12-1/2EE |
| CAZ | 12-1/2EEE |
| CBA | 12-1/2EEEE |
| BZT | 12A |
| BZW | 12B |
| BZX | 12C |
| BZY | 12D |
| BZZ | 12E |
| CAA | 12EE |
| CAB | 12EEE |
| ACX | 13 |
| CCB | 13 NARROW |
| ADA | 13 REGULAR |
| JHH | 13 TO 14 |
| CCC | 13 WIDE |
| CCD | 13 X-NARROW |
| CCE | 13 X-WIDE |
| CCX | 13-1/2 NARROW |
| CCY | 13-1/2 REGULAR |
| CCZ | 13-1/2 WIDE |
| CDA | 13-1/2 X-NARROW |
| CDB | 13-1/2 X-WIDE |
| CCJ | 13-1/2A |
| CCK | 13-1/2B |
| CCL | 13-1/2C |
| CCM | 13-1/2D |
| CCN | 13-1/2E |
| CCP | 13-1/2EE |
| CCQ | 13-1/2EEE |
| CBM | 13A |
| CBL | 13AA |
| CBN | 13B |
| CBP | 13C |
| CBQ | 13D |
| CBR | 13E |
| CBS | 13EE |
| CBT | 13EEE |
| CBW | 13EEEE |
| ADF | 14 |
| JHJ | 14 JUNIOR |
| CDT | 14 NARROW |
| ADJ | 14 REGULAR |
| JHK | 14 TO 15 |
| KHC | 14 TO 16 E |
| CDW | 14 WIDE |
| EJR | 14 X-NARROW |
| EJS | 14 X-WIDE |
| CEM | 14-1/2 NARROW |
| ADR | 14-1/2 REGULAR |
| CEN | 14-1/2 WIDE |
| CEP | 14-1/2 X-NARROW |
| CEQ | 14-1/2 X-WIDE |
| CDE | 14AA |
| CDG | 14B |
| CDJ | 14D |
| CDK | 14E |
| CDL | 14EE |
| CDM | 14EEE |
| ADV | 15 |
| ADW | 15 JUNIOR |
| CFH | 15 NARROW |
| ADY | 15 REGULAR |
| JHL | 15 TO 16 |
| CFJ | 15 WIDE |
| CFK | 15 X-NARROW |
| CFL | 15 X-WIDE |
| CET | 15AA |
| CEX | 15B |
| CEZ | 15D |
| CFA | 15E |
| CFB | 15EE |
| CFD | 15EEEE |
| AEB | 16 |
| JHM | 16 JUNIOR |
| JHN | 16 TO 17 |
| CGJ | 16E |
| AER | 17 JUNIOR |
| AAC | 2 |
| JPL | 2 NARROW |
| JPH | 2 REGULAR |
| KGV | 2 TO 4 A |
| JPM | 2 WIDE |
| JPN | 2 X-WIDE |
| JPP | 2-1/2 NARROW |
| JPQ | 2-1/2 REGULAR |
| JPR | 2-1/2 WIDE |
| JPS | 2-1/2 X-WIDE |
| KHD | 2A |
| AAD | 3 |
| HYR | 3 NARROW |
| JUE | 3 NARROW-REGULAR |
| HYS | 3 REGULAR |
| JUF | 3 REGULAR-WIDE |
| JHB | 3 WIDE |
| JPT | 3 X-NARROW |
| HYT | 3-1/2 NARROW |
| JUG | 3-1/2 NARROW-REGULAR |
| HYW | 3-1/2 REGULAR |
| JUH | 3-1/2 REGULAR-WIDE |
| JHC | 3-1/2 WIDE |
| JPU | 3-1/2 X-NARROW |
| BJB | 3-1/2 X-WIDE |
| BHG | 3A |
| BHN | 3X-WIDE |
| AAE | 4 |
| BJQ | 4 NARROW |
| JUJ | 4 NARROW-REGULAR |
| BJR | 4 REGULAR |
| JUK | 4 REGULAR-WIDE |
| JHD | 4 TO 5 |
| KGW | 4 TO 6 A |
| BJS | 4 WIDE |
| GKB | 4 X-NARROW |
| BJT | 4 X-WIDE |
| BKG | 4-1/2 NARROW |
| JUL | 4-1/2 NARROW-REGULAR |
| BKH | 4-1/2 REGULAR |
| JUM | 4-1/2 REGULAR-WIDE |
| BKJ | 4-1/2 WIDE |
| GKD | 4-1/2 X-NARROW |
| BKK | 4-1/2 X-WIDE |
| BKA | 4-1/2A |
| BJZ | 4-1/2AA |
| BJY | 4-1/2AAA |
| BJX | 4-1/2AAAA |
| BKB | 4-1/2B |
| BKC | 4-1/2C |
| BKD | 4-1/2D |
| BKE | 4-1/2E |
| BKF | 4-1/2EE |
| BJG | 4A |
| BJF | 4AA |
| BJE | 4AAA |
| BJD | 4AAAA |
| BJH | 4B |
| BJJ | 4C |
| BJK | 4D |
| BJL | 4E |
| BJM | 4EE |
| AAF | 5 |
| BLC | 5 NARROW |
| JUN | 5 NARROW-REGULAR |
| AAJ | 5 REGULAR |
| JUP | 5 REGULAR-WIDE |
| KGX | 5 TO 7 B |
| BLD | 5 WIDE |
| BLE | 5 X-NARROW |
| BLF | 5 X-WIDE |
| BLY | 5-1/2 NARROW |
| JUQ | 5-1/2 NARROW-REGULAR |
| BLZ | 5-1/2 REGULAR |
| JUR | 5-1/2 REGULAR-WIDE |
| BMA | 5-1/2 WIDE |
| BMB | 5-1/2 X-NARROW |
| BMC | 5-1/2 X-WIDE |
| BLL | 5-1/2A |
| BLK | 5-1/2AA |
| BLJ | 5-1/2AAA |
| BLH | 5-1/2AAAA |
| BLM | 5-1/2B |
| BLN | 5-1/2C |
| BLP | 5-1/2D |
| BLQ | 5-1/2E |
| BLR | 5-1/2EE |
| BLS | 5-1/2EEE |
| BKQ | 5A |
| BKP | 5AA |
| BKN | 5AAA |
| BKM | 5AAAA |
| BKR | 5B |
| BKS | 5C |
| BKT | 5D |
| BKW | 5E |
| BKX | 5EE |
| BKZ | 5EEEE |
| AAM | 6 |
| BMX | 6 NARROW |
| JUS | 6 NARROW-REGULAR |
| AAQ | 6 REGULAR |
| JUT | 6 REGULAR-WIDE |
| JHE | 6 TO 7 |
| BMY | 6 WIDE |
| BMZ | 6 X-NARROW |
| BNA | 6 X-WIDE |
| BNS | 6-1/2 NARROW |
| JUU | 6-1/2 NARROW-REGULAR |
| BNT | 6-1/2 REGULAR |
| JUV | 6-1/2 REGULAR-WIDE |
| BNW | 6-1/2 WIDE |
| BNX | 6-1/2 X-NARROW |
| BNY | 6-1/2 X-WIDE |
| BNF | 6-1/2A |
| BNE | 6-1/2AA |
| BND | 6-1/2AAA |
| BNC | 6-1/2AAAA |
| BNG | 6-1/2B |
| BNH | 6-1/2C |
| BNJ | 6-1/2D |
| BNK | 6-1/2E |
| BNL | 6-1/2EE |
| BNM | 6-1/2EEE |
| BMH | 6A |
| BMG | 6AA |
| BMF | 6AAA |
| BME | 6AAAA |
| BMJ | 6B |
| BMK | 6C |
| BML | 6D |
| BMM | 6E |
| BMN | 6EE |
| BMP | 6EEE |
| AAT | 7 |
| BPN | 7 MEDIUM |
| BPP | 7 NARROW |
| JUW | 7 NARROW-REGULAR |
| AAW | 7 REGULAR |
| JUX | 7 REGULAR-WIDE |
| JHF | 7 TO 8 |
| KGY | 7 TO 9 B |
| BPR | 7 WIDE |
| BPS | 7 X-NARROW |
| BPT | 7 X-WIDE |
| BQL | 7-1/2 NARROW |
| JUY | 7-1/2 NARROW-REGULAR |
| BQM | 7-1/2 REGULAR |
| JUZ | 7-1/2 REGULAR-WIDE |
| BQN | 7-1/2 WIDE |
| BQP | 7-1/2 X-NARROW |
| BQQ | 7-1/2 X-WIDE |
| BQA | 7-1/2A |
| BPZ | 7-1/2AA |
| BPY | 7-1/2AAA |
| BPX | 7-1/2AAAA |
| BQB | 7-1/2B |
| BQC | 7-1/2C |
| BQD | 7-1/2D |
| BQE | 7-1/2E |
| BQF | 7-1/2EE |
| BQG | 7-1/2EEE |
| BPD | 7A |
| BPC | 7AA |
| BPB | 7AAA |
| BPA | 7AAAA |
| BNZ | 7AAAAA |
| BPE | 7B |
| BPF | 7C |
| BPG | 7D |
| BPH | 7E |
| BPJ | 7EE |
| BPK | 7EEE |
| BPL | 7EEEE |
| BPM | 7F |
| AAZ | 8 |
| BRJ | 8 NARROW |
| JVA | 8 NARROW-REGULAR |
| ABC | 8 REGULAR |
| JVB | 8 REGULAR-WIDE |
| KGZ | 8 TO 10 C |
| JHG | 8 TO 9 |
| BRK | 8 WIDE |
| BRL | 8 X-NARROW |
| BRM | 8 X-WIDE |
| BSE | 8-1/2 NARROW |
| BSF | 8-1/2 REGULAR |
| BSG | 8-1/2 WIDE |
| BSH | 8-1/2 X-NARROW |
| BST | 8-1/2 X-WIDE |
| BRS | 8-1/2A |
| BRR | 8-1/2AA |
| BRQ | 8-1/2AAA |
| BRP | 8-1/2AAAA |
| BRT | 8-1/2B |
| BRW | 8-1/2C |
| BRX | 8-1/2D |
| BRY | 8-1/2E |
| BRZ | 8-1/2EE |
| BSA | 8-1/2EEE |
| BQX | 8A |
| BQW | 8AA |
| BQT | 8AAA |
| BQS | 8AAAA |
| BQY | 8B |
| BQZ | 8C |
| BRA | 8D |
| BRB | 8E |
| BRC | 8EE |
| BRD | 8EEE |
| BRE | 8EEEE |
| ABJ | 9 |
| BTC | 9 NARROW |
| ABM | 9 REGULAR |
| EHE | 9 TO 10 |
| BTD | 9 WIDE |
| BTE | 9 X-NARROW |
| BTF | 9 X-WIDE |
| BTY | 9-1/2 NARROW |
| BTZ | 9-1/2 REGULAR |
| BWA | 9-1/2 WIDE |
| BWB | 9-1/2 X-NARROW |
| BWC | 9-1/2 X-WIDE |
| BTL | 9-1/2A |
| BTK | 9-1/2AA |
| BTJ | 9-1/2AAA |
| BTH | 9-1/2AAAA |
| BTM | 9-1/2B |
| BTN | 9-1/2C |
| BTP | 9-1/2D |
| BTQ | 9-1/2E |
| BTR | 9-1/2EE |
| BTS | 9-1/2EEE |
| BSP | 9A |
| BSN | 9AA |
| BSM | 9AAA |
| BSL | 9AAAA |
| BSQ | 9B |
| BSR | 9C |
| BSS | 9D |
| CJW | 9E |
| BSW | 9EE |
| BSX | 9EEE |
| BSY | 9EEEE |
| A | ANY ACCEPTABLE |
| ATJ | LARGE |
| ATN | MEDIUM |
| BCM | MEDIUM LARGE |
| AXD | REGULAR |
| ATS | SMALL |
| ATX | UNIVERSAL |
| ATY | X-LARGE |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCBF*;CBBLDCBH$$DCBJ*)
| Table 1 |
| Reply Code (AN47) | Reply |
| BCN | INSULATED |
| CBF | METAL EDGE |
| AHP | NONMARKING |
| CBG | RAISED TREAD |
| CBH | REMODELED |
| CBJ | SPIKE PROTECTIVE |
| CBK | VENTILATED |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
PGCD*APROCUREMENT GROUP CODE
A FIVE DIGIT NUMERIC CODE USED TO GROUP INDIVIDUAL SIZES OF A STANDARD GENERIC ITEM.
Enter the numeric reply with five digit(s) exactly.
(PGCDA11111)
SSEQ*ASIZE SEQUENCE INDICATOR
A THREE DIGIT NUMERIC CODE USED FOR SEQUENCING ITEMS IN ASCENDING SIZE ORDER FROM SMALLEST TO LARGEST SIZE. - MRC WAS CANCELED BECAUSE THE MRC DOES NOT MAKE SENSE, IT WAS NOT REPLACED AS NO ONE UNDERSTANDS THIS MRC AND WHAT THE CODED REPLIES EQUATE TO.
Enter the numeric reply with three digit(s) exactly.
(SSEQA111)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| CS | CONSTRUCTION |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| FN | FINISH |
| FM | FORM |
| FA | FORMULA |
| GR | GRADE |
| GP | GROUP |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| NR | NUMBER |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| QA | QUALITY |
| RN | RANGE |
| RT | RATING |
| RF | REFERENCE NUMBER |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCN2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CF | CUBIC FEET |
| CN | CUBIC INCHES |
| CM | CUBIC METERS |
AJAF*JUNPACKAGED UNIT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING, IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAFJAA2.0*;AJAFJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJAG*JUNPACKAGED UNIT WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAGJAB2.0*;AJAGJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJAH*JUNPACKAGED UNIT HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAHJAA2.0*;AJAHJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information